fluke networks certification, troubleshooting and ... · gigabit ethernet deployments and will...

Fluke NetworksCertification, Troubleshooting and Installation ToolsT: 01376 346600 F: 01376 346620www.connectixcablingsystems.com

Issue 1.2

+44 (0)1376 346 600 | [email protected] | www.connectixcablingsystems.com

01 DSX-5000 CableAnalyzerTM 02 DSX-8000 CableAnalyzerTM

03 CertiFiber® Pro Optical Loss Test Set04 OptiFiber Pro® OTDR05 FI-7000 FiberInspectorTM Pro06 DSX-600 CableAnalyzerTM

07 CableIQTM Qualification Tester08 MicroScanner2

09 IntelliTone Pro 200 Probe10 Cable Fault Finder11 VisiFault™ Visual Fault Locator12 Cable13 Accessories14 Gold Service Plan15 Rent a Tester

The Connectix Cabling Systems™ (CCS™) product range covers Category 5e, 6 and 6A cabling, optical fibre and other containment and interconnect solutions. CCS™ is renowned for innovation and our in-house facility makes it easy to customise products to fit clients requirements whenever necessary.

Since it was formed in 1993, CCS™ has become one of the UK’s leading manufacturers of networking systems for data and voice. Every business is different, which is why every Connectix Cabling System can be individually designed and installed by a CCS™ approved installer. Individual planning ensures that every company that chooses Connectix receives the ideal infrastructure for their unique requirements.

Head OfficeConnectix Ltd. 500 Avenue West, Skyline 120, Braintree, Essex, CM77 7AA

T: 01376 346600 F: 01376 346620E: [email protected]

Dublin OfficeConnectix Ltd. 29 Westlink Industrial Estate, Kylemore Road, Dublin 10, Ireland

T: 01 6236751 F: 01 6236759E: [email protected]

Edinburgh OfficeConnectix Ltd. Unit B8, Midlothian Innovation Centre, Pentlandfield, The Bush, Midlothian, EH25 9RE

T: 0131 440 4012 F: 0131 440 4901E: [email protected]

Fluke Networks RangeQuick Reference

Connectix Cabling SystemsTM

Company Overview

+44 (0)1376 346 600 | [email protected] | www.connectixcablingsystems.com 2+44 (0)1376 346 600 | [email protected] | www.connectixcablingsystems.com 1

The DSX CableAnalyzer Series copper test solution enables testing and certification of twisted pair cabling for up to 40 Gigabit Ethernet deployments and will handle any cabling system whether it is a Cat 5e, 6, 6A, 8 or Class FA and I/II. The DSX CableAnalyzer Series provides accurate, error-free certification. The DSX certifies copper cabling, complies with all standards including Level VI/2G accuracy, making jobs easier to manage, and getting to system acceptance faster. It’s not just for the expert technicians and Project Managers. Individuals of various skill levels can improve the set-up, operation, test reporting, and simultaneously manage diverse projects.

Features & Benefits

• Versiv enables users to accomplish more than ever with a cable tester, by accelerating every step of the testing process.• ProjX™ management system eases tasks from initial set-up of a job to system acceptance. It eliminates redundant steps, and ensures that all tests are completed correctly the first time, and every time.• Taptive™ user interface puts advanced data analysis and easy set-up and operation at the fingertips of technicians of all skill levels.• LinkWare PC management software provides unmatched analysis of test results and professional test reports.• The DSX reduces the time required to fix cabling faults with dedicated diagnostics, a simple test that locates the problem.

The DSX CableAnalyzer™ Series is the copper certification solution of the Versiv™ cabling certification product family. Starting with the DSX-5000, you have the availability to certify up to Cat 6A/Class FA/1GHz. The Versiv line also includes fibre OLTS certification, OTDR, and fibre inspection modules. The Versiv tester range reduces overall certification costs by up to 2/3, adding up to 10% to the bottom line of every job. While the fastest test time (8 seconds for Cat 6A) plays a part, the system is designed from the ground up to reduce errors and streamline certification. Full integration with the LinkWareTM Live cloud service lets the Project Manager remotely set up the testers, monitor job progress and even locate tester from any smart device.

Features & Benefits

• Eight second Cat 6A test time contributes to the fastest way to gain certification.• Graphically displays the source of failures including crosstalk and distance to shield faults for faster troubleshooting.• Manage up to 12,000 Cat 6A test results with full graphics.• Capacitive touch-screen allows quick tester setup with easily selectable cable types, standards and testing parameters.• Versiv enables users to accomplish more than ever with a cable tester, by accelerating every step of the testing process.• LinkWare Live cloud service lets the Project Manager remotely set up the testers, monitor job progress and even locate tester from any smart device.• The DSX reduces the time required to fix cabling faults with dedicated diagnostics, a simple test that locates the problem.

Ordering InformationProduct Description Part Number

DSX-5000 INTL 00A-500-000-30

DSX-5000QI INTL/GLD 00A-500-000-32

DSX-5000QI INTL 00A-500-000-34

CFP-Q-ADD 00A-500-000-45

Specifications

Display5.7 in LCD display with a projected capacitance

touch-screen

Operating Altitude

13,123 ft (4,000 m), 10,500 ft (3,200 m) with AC adapter

Safety CSA 22.2 No. 61010, IEC 61010-1 3rd Edition

WeightMain Versiv unit with DSX module

and battery installed: 3 lbs, 5oz (1.28 kg)

DimensionsMain Versiv unit with DSX module

and battery installed: 2.625 in x 5.25 in x 11.0 in (6.67 cm x 13.33 cm x 27.94 cm)

EMC EN 61326-1

TIA Category 3, 4, 5, 5e, 6, 6A per TIA 568-C.2

ISO/IECClass C and D, E, EA, F, FA and I/II certification per

ISO/IEC 11801:2002 and amendments

Max. Frequency

1000 MHz

Case High impact plastic with shock absorbing overmold

Main Unit and Remote

Lithium ion battery pack, 7.2 V

Typical Battery Life

8 hours

Charge Time 4 hours to charge from 10 % - 90 % capacity

Languages Supported

English, French, German, Italian, Japanese, Portuguese, Spanish, Chinese, Korean, Russian, Trad

Chinese, Czech, Polish, Swedish, Hungarian

Operating Temperature

32°F to 113°F (0°C to 45°C)

Storage Temperature

-22°F to +140°F (-30°C to +60°C)

Fluke Networks RangeDSX-5000 CableAnalyzerTM



DSX-8000-W INT 00A-500-000-10

DSX-8000-W-INT/Gold 00A-500-000-20

DSX-8000QI-W-INT/Gold 00A-500-000-25

CFP-Q-ADD 00A-500-000-45

Specifications

Display5.7 in LCD display with a projected

capacitance touch-screen

Operating Altitude

13,123 ft (4,000 m), 10,500 ft (3,200 m) with AC adapter

Safety CSA 22.2 No. 61010, IEC 61010-1 3rd Edition

WeightMain Versiv unit with DSX module

and battery installed: 3 lbs, 5oz (1.28 kg)

DimensionsMain Versiv unit with DSX module

and battery installed: 2.625 in x 5.25 in x 11.0 in (6.67 cm x 13.33 cm x 27.94 cm)

EMC EN 61326-1

TIA Category 3, 4, 5, 5e, 6, 6A,8 per TIA 568-C.2

ISO/IECClass C and D, E, EA, F, FA and I/II certification per

ISO/IEC 11801:2002 and amendments

Max. Frequency

2000 MHz

Case High impact plastic with shock absorbing overmold

Main Unit and Remote

Lithium ion battery pack, 7.2 V

Typical Battery Life

8 hours

Charge Time 4 hours to charge from 10 % - 90 % capacity

Languages Supported

English, French, German, Italian, Japanese, Portuguese, Spanish, Chinese, Korean, Russian, Trad

Chinese, Czech, Polish, Swedish, Hungarian

Operating Temperature

32°F to 113°F (0°C to 45°C)

Storage Temperature

-22°F to +140°F (-30°C to +60°C)

Category 8 test modes

ANSI/TIA-1152 Level 2G

Class I/II test modes

IEC 61935-1 Ed. 5 Level VI


The CertiFiber Pro Optical Loss Test Set improves the efficiency of fibre optics certification. The Taptive user interface simplifies set-up, eliminates errors and speeds troubleshooting. A set reference wizard ensures correct reference setting and eliminates negative loss errors. Built on the future-ready Versiv platform, CertiFiber Pro OLTS provides merged Tier 1 (Basic) / Tier 2 (Extended) testing and reporting when paired with OptiFiber Pro module. A convenient quad module supports both singlemode and multimode and is multimode Encircled Flux compliant. Copper certification and Wi-Fi Analysis and Ethernet troubleshooting modules are also available. Analyse test results and create professional test reports using LinkWare Management Software.

The OptiFiber® Pro is the industry’s first OTDR built from the ground up to meet the challenges of enterprise fibre optic infrastructures. This OTDR range elevates fibre optic testing with the industry’s only smart phone interface that turns a technician into a fibre expert. The Data Centre OTDR configuration eliminates uncertainty and errors that occur when testing data centre fibre. Its ultra-short dead zones enable testing of fibre patch cords in virtualised data centres.


CFP-100-Q INTL 00A-500-000-40

SpecificationsCable Type Fibre

Cables Included Fibre

Colour of Product Yellow

Display Type Y

LED Indicators Y

Operating Relitive Humidity (H-H)

0-90%

Operating temperature (T-T) -18 - 45 °C

Product type Optical Loss Test Sets (OLTS)

Storage temperature (T-T) -30 - 60 °C

Input ConnectorInterchangeable connector adapter

(LC standard, SC, ST and FCoptional)

Detector Type InGaAs

Wavelengths 850 nm, 1300 nm, 1310 nm, 1550 nm

Power Measurement Range0 dBm to -65 dBm (850 nm) 0 dBm to -70 dBm (all other

wavelengths)

Power Measurement Uncertainty

< +/- 5% +/- 32 pW

Measurement Linearity < ± 0.1 dB

Features & Benefits

• Versiv enables users to accomplish more than ever before with a cable tester, accelerating every step of the testing process.• ProjX management system eases tasks from initial set-up of a job to system acceptance. It eliminates redundant steps, and ensures that all tests are completed correctly the first time, and every time.• Taptive user interface puts advanced data analysis and easy set-up and operation at the fingertips of technicians of all skill levels.• LinkWare management software provides unmatched analysis of test results and professional test reports.

Fluke Networks RangeCertiFiber® Pro Optical Loss Test Set

Fluke Networks RangeOptiFiber Pro® OTDR

Features & Benefits

• First OTDR with a smart-phone user-interface• Accelerate fibre certification with the fastest set-up and trace times.• SmartLoop™ technology enables the testing of two fibres in a single test eliminating the need to travel to the far end of the connection to perform tests.• Versiv™ modular design supports copper certification, fibre optic loss, OTDR testing and fibre end-face inspection.• Improve resource utilization with custom configurations for projects and users.• Simplify use with “DataCentre OTDR™” mode and EventMap™ view.


OFP-100-M/INTL 00A-500-009-00

OFP-100-MI/INTL 00A-500-009-02

OFP-100-Q/INTL 00A-500-009-50

OFP-100-QI INTL/T 00A-500-009-52

OFP-100-QI/INTL 00A-500-009-54

OFP-100-S/INTL 00A-500-009-56

OFP-100-SI/INTL 00A-500-009-58

OFP-CFP-MI INTL 00A-500-009-60

OFP-CFP-QI INTL 00A-500-009-62

OFP-CFP-SI INTL 00A-500-009-64

OFP-DEMO-KIT 00A-500-009-66

OFPMI-MFP/INTL 00A-500-009-68Specifications - Singlemode Module

Wavelengths1310 nm +/- 25 nm

1550 nm +/- 30 nm

Compatible fibre types Singlemode

Event dead zone 1310 nm: 0.6 m, 1550 nm: 0.6 m

Attenuation dead zone 1310 nm: 3.6 m, 1550 nm: 3.7 m

Dynamic range 1310 nm: 32 dB, 1550 nm: 30 dB

Max distance range setting 130 km

Distance measurement range 1310 nm: 80 km, 1550 nm: 130 km

Reflectance range1310 nm: -14 dB to -65 dB 1550 nm: -14 dB to -65 dB

Sample resolution 3 cm to 400 cm

Pulse widths (nominal)3, 10, 30, 100, 300, 1000, 3000,

10000, 20000 ns

Specifications - Multimode Module

Wavelengths850 nm +/- 10 nm 1300 nm +35/-15 nm

Compatible fibre types 50/125 μm, 62.5/125 μm

Event dead zone 850 nm: 0.5 m, 1300 nm: 0.7 m

Attenuation dead zone 850 nm: 2.5 m, 1300 nm: 4.5 m

Dynamic range 850 nm: 28 dB, 1300 nm: 30 dB

Max distance range setting 40 km

Distance measurement range 1310 nm: 80 km, 1550 nm: 130 km

Reflectance range 850 nm: 9 km, 1300 nm: 35 km

Sample resolution 3 cm to 400 cm

Pulse widths (nominal)850 nm: 3, 5, 20, 40, 200 ns

1300 nm: 3, 5, 20, 40, 200, 1000 ns


End-face contamination is a leading cause of fibre failures. Dirt and contaminant cause insertion loss and back-reflection that inhibits optical transmission and causes havoc with transceivers. Fibre loss and OTDR testing can expose this problem, but in many cases, dirty connections make fibre testing time consuming and inaccurate. Since dirt can be an issue before, during, or after fibre optic certification testing, and migrate from one end-face to another upon mating, both sides of any connection must always be cleaned and inspected. The FI-7000 FiberInspector Pro enables you to quickly inspect and certify fibre end-faces inside ports or patch cords. Its 2-second automated PASS/FAIL certification eliminates human subjectivity and enables anyone to become a fibre inspection expert.

Feature DSX-600 DTX-1500

DescriptionEssential Cat 6A

& Class EA copper tester

Cat 6A & Class EA copper tester

Cat 3 - 6A/Class EA

Class FA

Cat 8/Class I/II

Max. Frequency 500 MHz 500 MHz

Auto-test Time10s: Class EA/Cat 6A9s: Class E/Cat 6A

22s: Class EA/Cat 6A9s: Class E/Cat 6A

Shield Integrity Test

Permanent Link Adapter

Optional Optional

Advanced Fault Info Troubleshooting

Limited (HDTDR & HDTDX)

Limited

PoE Resistance Unbalance

Integrated Alien Crosstalk Capability

Coax Adapters Optional Optional

M12 Adapters Optional Optional

Patch Cord Adapters

Fibre - OLTS, OTDR & Inspection

The DSX-600 CableAnalyzer™ is the essential certification tool for copper, twisted pair structured cabling from Cat 3/Class C through Cat 6A/Class EA features speed, and reliability that makes you more efficient and productive – you can see the results on the bottom line. No other tester will deliver as consistently as the DSX-600. Its gesture-based user interface allows your techs to spend less time interpreting screens and more time testing. 500 MHz frequency range certifies Cat 6A/Class EA cabling for 10 Gigabit Ethernet in just 10 seconds. Advanced diagnostics pinpoint the location of a failure and suggest corrective action.

Fluke Networks RangeFiberInspectorTM Pro

Features & Benefits

• Automated Pass/Fail acceptance testing of fibre end-faces• Graphical indication of problem areas due to contamination, pits, chips, and scratches.• Large touch-screen for pinch and zoom.• Certify to industry standards – IEC 61300-3-35.• No more confusion about whether the fibre is good or bad.• Eliminate human subjectivity from end-face measurements.• Save end-face views during certification process.• Reduce fibre inspection time with 2-second grading.• ProjX™ system manages job requirements and progress from set-up to systems acceptance, making sure all tests are completed correctly.• Taptive™ user interface simplifies set-up, and eliminates error• Analyze test results and create professional test reports using LinkWare™ management software.


Fl-500 INTL 00A-500-009-05

Fl-7000 INTL 00A-500-009-50

Specifications

Battery lifeEleven hour with Inspection probe attached

Operating altitude4,000 m (13123 ft), 3200 m (10,500 ft) with ac adapter

WeightMainframe with module and battery: 3 lbs, 5 oz (1.28 kg)

DimensionsMainframe with module and battery: 2.625 in x 5.25 in x 11.0 in (6.67 cm x 13.33 cm x 27.94 cm)

Non-operating temperature -30ºC to 60ºC

EMC EN 61326-1

Charge timeFour hours to charge from 10% - 90% capacity

Operating Temperature -18ºC to 45ºC

Probe 2M pixels Blue LED

Probe Light source Blue LED

Probe Power source Versiv mainframe

Probe Field of View (FOV)Horizontal: 425 μm, Vertical: 320 μm

Probe Minimum detectable particle size

0.5 μm

Probe DimensionsApproximately 6.75 in x 1.5 in (1175 mm x 35 mm) without adapter tip

Probe Weight 200G

Operating Temperature range 32°F to 122°F (0 °C to +50 °C)

Storage Temperature range -4°F to +158°F (-20°C to +70°C)

Probe Certifications CE

Battery Lithium ion battery pack, 7.2 volts

Storage altitude 12,000mB

Features & Benefits

• Entry-level copper certifier for Category 6A and Class EA copper installations.• Increased productivity and enhanced ROI to small cable installation jobs.• Cat 6A Autotest in 10 seconds.• Compatible with LinkWare Live.


DSX-600 INTL 00A-500-000-70

DSX-600-PRO INTL 00A-500-000-75

GLD-DSX-600 00A-400-001-47

GLD-DSX-600-PRO 00A-400-001-48

Specifications Display 5.7 in LCD touch-screen display

SafetyCSA 22.2 No. 61010, IEC 61010-1 3rd

Edition

Weight 3 lbs (1.36 kg)

Dimensions2.625 in x 5.25 in x 11.0 in

(6.67 cm x 13.33 cm x 27.94 cm)

EMC EN 61326-1: Portable

TIACategory 3, 5, 5e, 6, 6A per TIA 568-C.2

or TIA-1005

ISO/IECClass C and D, E, EA certification per ISO/

IEC 11801:2002 and amendments

Operating Temperature 32° F to 113° F (0° C to 45° C)

Storage Temperature -22° F to +140° F (-30° C to +60° C)



Today’s communications technicians have more problems to deal with than just the cabling. They have to rule out a whole host of cable and service issues before determining the cause of a connectivity problem. Is there telephone voltage? What’s the polarity? Is there a switch at the far end? Is PoE available? MicroScanner2 gives technicians high power vision to verify today’s most common voice, data, and video services.

MicroScanner2 features built-in IntelliTone digital and analogue toning to precisely locate virtually any cable or wire pair, regardless of work environment. Use digital mode to locate high-grade data cabling (Cat 5e/6/6a) in bundles, or at switches, patch panels, or wall outlets. Or, use analogue mode on voice-grade cabling (Cat 3 and below), as well as coax, security/alarm, and speaker wiring.

CableIQ qualification tester is the first cabling bandwidth tester for network technicians. This Ethernet network cable tester gives even the most novice tech the vision to see what speeds existing cabling can support, quickly isolate cabling from network problems, and discover what is at the far end of any cable. That means network techs can close trouble tickets faster, reduce on-call time, and save money by better utilizing their existing infrastructure.

CableIQ qualification tester’s powerful network troubleshooting capability and intuitive interface enable your front line technicians to identify and troubleshoot a wider range of problems within your network infrastructure. Is the port active? Are the duplex settings matched? Is it a network problem or a Ethernet cable problem? Can the Ethernet cable support the required network bandwidth? CableIQ network cable tester is the only Ethernet cable tester that can answer all these questions before trouble tickets are escalated to the next level reducing problem escalation by up to 30%.

Fluke Networks RangeCableIQTM Qualification Tester

Features & Benefits

• Works on live networks to provide Ethernet switch detection and device configuration• Measure network capacity (10 Meg, 100 Meg, 1 Gig) to determine support for VoIP, data and video• Advanced troubleshooting diagnostics; insertion loss, cross talk, noise issues• Core troubleshooting features; length, distance to fault, graphical wire mapping, opens, shorts, power over Ethernet (POE) detection• Tests all copper cabling media: twisted-pair, coax, and audio• Locate and trace cables with digital toning technology. Requires IntelliTone 200 Digital Probe (included with CIQ-KIT)


CIQ-100 CableIQ Main 00A-500-004-00

CIQ-100 CableIQ IT Kit 00A-500-004-05

Specifications

Cable types supportedUTP, STP, FTP, SSTP, RG6, RG59, audio

and security

Qualification autotests1000BASE-T, 100BASE-TX, 10BASE-T,

VoIP, 1394b S100, TELCO, Wiremap only, Coax

Results storage Up to 250 qualification test results

PowerBattery type: 4 AA (NEDA 15A, IEC LR6)

alkaline batteries

Battery life 20 hours of typical use, without backlight

Other battery types supported

4AA photo lithium, NIHM, NICAD

Dimensions and weight7in x 3.5in x 1.75in

(17.8cm x 8.9cm x 4.5cm) 1.2 lb (0.55 kg)


Fluke MS2-100 00A-500-004-10

Fluke MS2-Kit 00A-500-004-15

Features & Benefits

• Versiv enables users to accomplish more than ever before with a cable tester, accelerating every step of the testing process.• ProjX management system eases tasks from initial set-up of a job to system acceptance. It eliminates redundant steps, and ensures that all tests are completed correctly the first time, and every time.• Taptive user interface puts advanced data analysis and easy set-up and operation at the fingertips of technicians of all skill levels.• LinkWare management software provides unmatched analysis of test results and professional test reports.

Specifications Altitude 4000 m; Storage: 12000 m

DisplayMonochrome liquid crystal display (LCD)

with backlight

Power sourceBattery type: 2 AA (NEDA 15A, IEC LR6)

Battery life: 20 hours of typical use

Safety EN 61010-1 2nd Edition

Warranty One year

Weight 0.8 lbs. (363 grams)

Dimensions3 in x 6.4” x 1.4 in

(7.6 cm x 16.3 cm x 3.6 cm)

EMC EN 61326-1

Operating Temperature 32 °F to 113 °F (0 °C to 45 °C)

Storage Temperature -4 °F to +140 °F (-20 °C to +60 °C)

Tone GeneratorIntelliTone digital tone: [500 KHz]; analog

tones: [400Hz, 1KHz]

PoE DetectionSolicits and detects the presence of

802.3af compatible PoE devices

Operating Humidity90 % (50 °F to 95 °F; 10 °C to 35 °C)

(%RH without condensing)

Agency CertificationsN10140 C-Tick EMC standard; FCC Part 15

Class A; CE European Union Directives Pollution Degree 2

Fluke Networks RangeMicroScanner2


TS® 90 - This easy-to-use, competitively priced tester is three tools in one—a fault locator, a cable and wire manager and a tone generator with SmartTone technology. From just ONE END of any two or more conductor cable you can measure up to 2,500 feet (762 meters). Easily find the distance to opens or shorts on electrical wire, telephone wire, security wire and coax. Results appear as a distance reading rather than a waveform, so it’s perfect for technicians unfamiliar with Time Domain Reflectometery (TDR). Patented SmartTone technology gives you five distinct tones to use for exact wire and pair identification, even in proximity to current-bearing cable.

TS® 100 -From just ONE END of any two or more conductor cable you can measure up to 3,000 feet (915 meters). The TS 100 cable fault locator lets you easily find the distance to opens or shorts on electrical wire, telephone wire, security wire and coax. Results appear as a distance reading rather than a waveform, so it’s perfect for technicians unfamiliar with Time Domain Reflectometery (TDR). The TS 100 cable fault locator is perfect for inventory management of cable stock in trucks and warehouses and it can help you generate more accurate bids for jobs by quickly assessing needs and managing the cable stock with greater accuracy.

The IntelliTone™ Pro 200 LAN Toner and Probe Series from Fluke Networks is the first network cable toner and probe to offer digital and analogue signalling all in one network toner and probe. That means it’s equipped with the most powerful cable location technologies for any work environment. Use digital mode to trace and locate data cabling safely and effectively on active networks. Use analog mode to isolate individual wire pairs, and trace voice, audio, and video cabling.

The IntelliTone™ Pro 200 LAN Toner and Probe Series from Fluke Networks gives you superior vision for locating cables hidden in floors, ceilings, walls, and in bundles. This network cable toner and probe’s breakthrough digital technology makes it the first tool to tone and trace safely and effectively on active networks.

Fluke Networks RangeIntelliTone Pro 200 Probe

Features & Benefits

• Ends cable location confusion, decisively rejects noise and false signals.• Locates cables on active networks, even when terminated at a switch.• Isolates cable and wiring within a bundle, despite cable bleed.• Confirms cable location, verifies continuity, and detects faults (opens, shorts, and reversed pairs) in one step. Specifications

Operating temperature 32 °F to 104 °F (0 °C to 40 °C)

Storage temperature -4 °F to +140°F (-20 °C to °C)

Operating relative humidity(% RH without condensation)

95 % (50 °F to 95 °F; 10 oC to 35 °C)75 % (95 °F to 104 °F; 35 °C to 40 °C)

Uncontrolled < 50 °F (< 10 °C)

Vibration Random, 2 g, 5 Hz-500 Hz

Shock 1 m drop test

Safety EN 61010-1, Category: None

Altitude 3000 m

EMC EN 61326-1, FCC Part 15 B

Battery type and life9 V alkaline (NEDA 1604A or IEC 6LR61);

20 hours typical

Applications

Copper cabling media including; 75 or 50 Ohm Coaxial cable; Two Conductor control, security, generic cabling. 10

Base-T or 10/100 Base-T datacom networks. UTP cable. Shielded Twisted

Pair supported in Cablemap function of the IntelliTone 200.


MT-8200-60-KIT 00A-500-004-20

MT-8200-63A 00A-500-004-25

Fluke Networks RangeCable Fault Finder


Fluke TS90 00A-500-006-00

Fluke TS100 00A-500-006-05

Fluke TS100 Finder Kit 00A-500-006-10

TS100 +BNX - Banana ABN 00A-500-006-15

TS100-PRO-BT-TDR 00A-500-006-20

TS100/TS90 BNC-Alligator 00A-500-006-25

TS100 + BNC to Alligator Clips 00A-500-006-30

TS100 Pouch + Belt Clip 00A-500-006-35

TS100/TS100PRO pouch 00A-500-006-40

Features & Benefits

• TS® 90 Works on any two or more conductor cable up to 2,500 feet.• TS® 100 Works on any two or more conductor cable up to 3,000 feet.• Instantly measures distance to open or any fault from one end of any cable pair.• Patented SmartTone® tone generator positively identifies pair.• Measures cable distance on spool.• Measures constantly while ‘on’.• Displays distance reading rather than waveform.• Large LED screen.• High voltage detection.• Moisture proof.


In today’s fast-paced workplace maximizing productivity is essential. Whether installing new fibre links or trouble shooting an existing network, the faster you can locate a problem, the faster you can fix it. That’s easier said than done when you are faced with a complex network of fibres, connectors and patch cords.

The laser-powered VisiFault Visual Fault Locator is a cable continuity tester that locates fibres, verifies cable continuity and polarity. This cable continuity tester helps find breaks in cables, connectors and splices. Continuous and flashing modes make for easieridentification. Compatible with 2.5mm and 1.25mm connectors for easy connection. Ruggedly constructed for demanding field-testing. This visual fault locator has a long battery life for hours of use.

We are stocking a broad range of launch leads and Test reference cords in Mulitmode and Singlemode. With a range of connectors to suit your testing requirements.

Fluke Networks RangeVisiFault™ Visual Fault Locator


Fluke VISIFAULT 00A-500-00-60

Features & Benefits

• Locates visual faults including tight bends, breaks and bad connectors.• Accelerates end-to-end fibre checks.• Easily verifies polarity and identifies fibres.• Features continuous and flashing modes.• Ergonomic case survives drops, impacts and vibrations.• Supports 2.5 mm and 1.25 mm SFF connectors.• Over 80 hours of battery life with two AA batteries.

Specifications Fibre compatibility Multimode and Singlemode

Wavelength 650 nm (visible wavelength)

Laser safety rating Class II

Output power < 1.3 mW

Output modesContinuous (steady) and flashing (2-3Hz

pulsed)

Range 3 km multimode, 4 km singlemode

Operating temperature

0 °C to 40 °C

Storage temperature

-20 °C to 60 °C

Relative humidity 95% (10 to 35 °C)

Vibration Random, 2g, 5-500 Hz

Shock 1 m drop onto all corners and face

Altitude 3000 m

Dimensions 157 x 52 x 37 mm (6.2 x 2.0 x 1.3 inch)

Weight (including batteries)

0.18 kg (5.7 oz)

Adapter 2.5 mm universal

Adapter cap Tethered protective end cap

Controls On/off, continuous/flashing

Battery type 2 x AA

Battery life > 80 hours in continuous mode

Safety CSA C22.2 No. 1010.1 1992, EN 61010-1, CE

Carrying Case Soft sided with belt loop

Fluke Networks RangeCable


Singlemode Launch Lead, 9μm

SMC-9-SCLC 00A-500-002-00

SMC-9-SCLCAPC 00A-500-002-05

SMC-9-SCSSC 00A-500-002-10

SMC-9-SCSSCAPC 00A-500-002-15

SMC-9-SCST 00A-500-002-20

SMC-9-STST 00A-500-002-25

Multimode Launch Cable, 50μm

MMC-50-SCLC 00A-500-001-00

MMC-50-SCSC 00A-500-001-05

MMC-50-SCST 00A-500-001-10

Multimode Launch Cable, 62.5/125μm

MMC-62-SCLC 00A-500-001-15

MMC-62-SCSC 00A-500-001-20

MMC-62-SCST 00A-500-001-25

Singlemode Simplex Test Reference Cord (TRC) Kit

SRC-9-SCLCAPC-KIT 00A-500-002-30

SRC-9-SCLC-KIT 00A-500-002-35

SRC-9-SCSCAPC-KIT 00A-500-002-40

SRC-9-SCSC-KIT 00A-500-002-45

SRC-9-SCST-KIT 00A-500-002-50

Multimode Encircled Flux (EF) Test Reference Cord (TRC) kit

MRC-50EFC-SCLCKIT 00A-500-001-30

MRC-50EFC-SCSCKIT 00A-500-001-35

MRC-50EFC-SCSTKIT 00A-500-001-40

Set of Test Adapters (2)

Fluke NFA-LC 00A-500-002-55

Fluke NFA-SC 00A-500-002-60

Fluke NFA-ST 00A-500-002-65


Maximize ROI. Minimize Risk.

You’ve made an investment in the best equipment in the industry. Protect your investment and limit unplanned downtime and costs with the best custom-built maintenance program. Membership in Fluke Networks’ Gold program provides expanded product coverage and support to ensure you get the most out of your investment.

What’s included with Gold Membership?

Benefits Gold Membership Non-Gold Member

Free Annual Calibration X

Free Repair with ‘First on Bench’ Turnaround Service

X

Free Accessory Replacements* X

Live Technical Support with Exclusive Phone Numbers

X

Loaner Equipment Service**. X

Member only Promotions X

Access to Technical Support Web, Email and Phone Web and Email

Response Time from Technical Support

<2 Hours <24 Hours

Customer Support - Phone and Email 24x7x365 8:30 - 17:00 Hours (CET)

Primary Case Handling Technical Support Engineer Customer Service Agent

*Applies to accessories included in the original product bundle**Available in certain geographies (please schedule 4-6 weeks in advance)

Calibration with Loaner Units

Don’t risk rejection of results by using an out-of-calibration tester. Gold support includes one calibration and factory refresh per year at no charge at one of thirteen worldwide Authorized Fluke Service Centres. And by scheduling your calibration in advance (six weeks recommended), you’ll receive a loaner unit, eliminating any downtime (available in most regions).

Repair with Loaner Units

Unlimited, no-hassle, no-charge repair services including labor, parts and shipping with first-on-bench priority. A loaner unit or replacement unit will be provided during repair to minimize downtime.

Discounts and Members-Only Promotions

Special discounts may be offered to Gold customers on new products, enhancements and used demo equipment.

The best installations start with the best tools. Our network installation line encompasses all the essential tools needed for a job done right! From our innovative JackRapid™ punchdown tool to our forged steel constructed D-Snips cable scissors, look to Fluke Networks.

Dirt, dust and other contaminants are the enemies of high-speed data transmission over optical fibre. Fluke Networks’ Fibre Optic Cleaning Kits contains the best fibre optic cleaning tools to effectively remove the toughest contaminants in any fibre network. You can choose between the easy-to-use Quick Clean Cleaners, the convenient cleaning cube/card and the best optic solvent pen to clean both patch cords and fibre end faces inside ports. All fibre optic cleaning materials are lint-free and enable an optimal wet and dry cleaning process.

Fluke Networks RangeGold Membership Service Plan

Fluke Networks RangeAccessories


Fluke Cleaning Kits

NFC-KIT-CASE-E 00A-500-003-00

NFC-KIT-CASE 00A-500-003-05

NFC-Cards-5pk 00A-500-003-10

NFC-SOLVENTPEN 00A-500-003-15

QuickClean-1.25-5P 00A-500-003-20

QuickClean-1.25-1P 00A-500-003-25

QuickClean-2.5-5P 00A-500-003-30

QuickClean-2.5-1P 00A-500-003-35

QuickClean-MPO-5P 00A-500-003-40

QuickClean-MPO-1P 00A-500-003-45

Fluke Impact Tools

10051000 D914 00A-500-004-25

10051100 D914 00A-500-005-05

10051120 D914 00A-500-005-10

10051501 D914 00A-500-005-20

Fluke ProTool Kits

ProTool Kit IS60 00A-500-007-00



Pouch for ProTool Kit IS60 00A-005-007-15



Fluke Tools and Accessories

Cable Stripper (round) 00A-500-008-00

Coax Stripper, 2 & 3 level 00A-500-008-05

Coax Stripper, 2 level 00A-500-008-10

Cable Splicing Knife 00A-500-008-15

D-Snips 00A-500-008-20

Can Wrench Hex Head 00A-500-008-25

Can Wrench + stripper 24 GA 00A-500-008-30


Fluke Tools and Accessories

Can Wrench + stripper 22 GA 00A-500-008-35

Electricians Scissors 00A-500-008-40

DBL Stripper + CRT 24/26 RH 00A-500-008-45

DBL SLT Stripper 22/24 GA RH 00A-500-008-50

DBL Stripper + CTR 22/24 RH 00A-500-008-55

+44 (0)1376 346 600 | [email protected] | www.connectixcablingsystems.com 15

Tester Price Per Week Price Per Month

DSX-5000 CableAnalyzer Copper Certification £195 POA



CertFiber Pro Optical Loose Test Set £295 POA

OptiFiber Pro ODTR £335 POA

FI-7000 FiberInspector Pro Fibre Inspector £95 POA

Microscanner2 £35 POA

CableIQ Qualification Tester £75 POA

FI-500 FiberInspector Micro Fibre Inspector Scope £95 POA

MultiFiber Pro MPO Tester £375 POA

SimpliFiber Pro Power Meter Light Source £75 POA

Fiber QuickMap £95 POA

Fiber OneShot PRO £95 POA

Mini 6s Core Splicer Kit £150 POA

Connectix Cabling Systems offers a wide range of low cost, short term Fluke Networks™ testers and DSX cable certifiers, able to test Cat5e, Cat6, Cat6a, Cat8 & Fibre Optics. This is an alternative option to purchasing a full kit and includes: Delivery and collection by UK courier, Zero capital or maintenance outlay and Telephone/email technical support.The perfect way to try before you buy. For more information on our rental process and/or equipment visit: www.rentatester.net.

How to rent a tester

> Firstly check with our sales department that we have availability for your required testing dates by calling 01376 346 600 or email [email protected]

> Complete our hire application form which requires your company details, proof of identification and agreement signature then return with your purchase order and payment.

> Delivery will be made to your confirmed office or site address.

> After saving your completed results to the tester internal memory or the built in memory card, download the results to your PC or laptop using the LinkWare software included for presentation to you customer or warranty company.

> Collection will then be arranged if required from your confirmed address once you have obtained an off-hire reference from us by 4.30pm on the day before the last hire day. Additional hire costs will be charged pro-rata at the daily rate including weekends over and above the initial hire period.

Fluke Networks RangeRent a Tester

Registered in England No: 2814569 Registered in Ireland No: E3979 VAT Registration No: GB 623 1064 83

fluke networks certification, troubleshooting and ... · gigabit ethernet deployments and will...

Documents