for smartphone user manual · working distance up to 60m (in open area, 30m in barrier area) ;....
TRANSCRIPT
FOR SMARTPHONE
CVM-WS50
USER MANUAL
Multi-channels Smartphone Wireless Microphone
Specification
6520.00MHz ~ 526.00MHz15dBm
ChannelsWireless FrequencyTransmitting Power
Lavalier Transmitter (TX) :
6520.00MHz ~ 526.00MHz15dBm
ChannelsWireless FrequencyTransmitting Power
6520.00MHz ~ 526.00MHz
ChannelsWireless Frequency
Receiver:
Hand-held Transmitter (HTX) :
Foreword
Thank you for purchasing Comica WS50 multi-channels smartphone wireless microphone.
WS50 is a creative wireless microphone for smartphone with built-in mobile phones holders. With built-in lithium polymer batteries, it uses UHF wireless technology and high-resolution LCD code screen, stepless adjustable volume at receiving end, and integrated into power monitoring, audio dynamic display bar, real-time monitoring and other functions; the working distance is up to 60 meters (30 meters in barrier area), it can assist your phone for video recording and achieve professional sound effects.
To ensure the smooth use and safety of the products, please read this user manual carefully before using and properly assemble and operate.
1
Main Features
. Working Distance Up to 60m (In Open Area, 30m in Barrier Area) ;
. Built-in Metal Material Smartphone Holder;
. LCD Screen for Displaying Channels and Audio Status;
. Stepless Volume Adjustment;
. Real-time Audio Monitor;
. Extendable for Connection with LED Light, Grip, Tripod, Cold-shoe, etc;
. Built-in Rechargeable Lithium Batteries;
. Portable and Light;
Working DistanceUp to 60m
Built-in Smartphone Holder
Stepless VolumeAdjustment
Real-timeAudio Monitor
Lithium Batteries LCD Screen
60M
2
. This product is compatible with both IOS and Android system, and when used with the iphone 7 or above, you need to use the original adapter cable;
. For smart phones with IOS system (Iphones), this Mic works well either in Audio or Video mode;
. For the smart phones with Android system, this Mic works well in audio mode, it may not be compatible with partial smart phones in video mode (Then we suggest you to try the 3rd party APP);
. To avoid signal interference during usage, please set the phone to flight mode;
. The working distance will be affected by the surrounding environment. In the process, please try to make sure the environment is barrier free and turn off the WIFI of your smart phone;
. During usage, the receiver should not be close to other UHF transmitters, radio stations and other devices which may cause interference;
. Please keep this product in dry environment;
. Do not expose the device in rain or humid environment, or there will be a danger of short circuit;
Notice
3
Packing List
Main Body:
Accessories:
Lavalier Transmitter (TX)
WS50(A)= WS50(B)= WS50(C)= WS50(H)=
ReceiverHand-held Transmitter (HTX) Ordinary Grip Electronic Grip Tripod on Table
1. 3.5mm Audio Mic2.TRRS Audio Output Cable3. USB Charging Cable4. Belt Clip5. Wind Muff6. Portable Case7. User Manual 8. Warranty Card
1
1 2 3 4 5 6
1 3 4
2 3 4
5 6 7 8
FOR SMARTPHONE
CVM-W
S50
USER MA
NUAL
Multi-channels Smartphone Wireless Microphone
+1 3 5+1 3 6+2 3 5+
++++
4
Components
Lavalier Transmitter(TX)1.Set Button for Channel Selection2.On-off/Muting Button3.Working Status Indicator Light4.Mic / LINE Input Socket/ Reset Hole5.Micro USB Charging Socket6.Belt Clip Hole7.1/4 Thread at the Back
Components and Instruction
21
3
4
5
7
6
The function of reset hole:When function program of the product is disorganized and unable to make normal adjustment or even shutdown, you can use an appropriate taper tool to insert the reset hole to realize the function reset.
5
Hand-held Transmitter(HTX)1. Microphone2. LCD Display3. Power /CH Setting Button4. ‘Low Cut/Normal’ Audio Switch5. AA Battery Holder
1
2
3
54
6
3
4
5
6 7
12
98
10
11
Receiver1.Set Button for Channel Selection2.Adjusting Screw 3.On/Off Button4.Working Status Indicator Light5.3.5mm Audio Output Socket/ Reset Hole6.Micro USB Charging Socket7.3.5mm Monitoring Socket8.Smartphone Clamp9.1/4 Thread at the bottom10.1/4 Thread at the top11.Volume Adjusting Button
External light and other equipment can be used on 1/4 thread at the top; Grip can be used for 1/4 thread at the bottom.The function of reset hole:When function program of the product is disorganized and unable to make normal adjustment or even shutdown, you can use an appropriate taper tool to insert the reset hole to realize the function reset.
7
1
2
Ordinary Grip1. 1/4 Screw Thread2. 1/4 Thread at the Bottom
8
Electronic Grip 1. 1/4 Screw Thread2. Adjustable Screw 3. 1/4 Thread at the Bottom4. Bluetooth Remote Controller5. On-off/Function Button of the Remote Controller
12
3
4
5
The bluetooth remote controller can be taken down for remote control; Bluetooth remote controller supports both IOS and Android system;
9
12
4
3
Tripod on Table1. 1/4 Screw Thread 2. Adjustable Screw3. Stretchable Tripods4. Direction Control Switch
10
Screen Display Instruction
Lavalier Transmitter(TX):
Normal Recording
Muting Power Indication
Channel
Audio Dynamic Display Bar
Hand-held Transmitter:
Normal Recording Power Indication
Channel
11
Receiver:
Normal recording Power Indication
Channel
Audio Dynamic Display Bar
12
Function Button Instruction
Insert the Mic line for audio recording /Insert a small object like a pin for reset
Channel Selection (Take effect when the screen is lighted up)
Audio Recording / Reset
Lavalier Transmitter
On-off//Muting Button
Long Press
Short Press
Short Press
Power On/Off
Muting Mode (Take effect when the screen is lighted up)
Set Button
MIC / LINE ResetMIC/LINE Input /Reset Hole
Long Press
Short Press
Left
Right
Power On/Off
Channel Sequence Switch
Low-cut
Normal
Power /CH Setting Button
“Low Cut/ Normal” Audio
Switch
Hand-held Transmitter
13
Dial the wheel to the left/ right Volume Adjustment
Insert the Mic line for audio output /Insert a small object like a pin for reset
Short Press
Power On/Off
Channel Selection (Take effect when the screen is lighted up)
Audio Output / Reset
Long PressOn-off Button
Set Button
OUTPUT Reset
Audio Output /Reset Hole
Volume Adjustment Wheel
Receiver
Long Press for 2 Seconds
Long Press for 6 Seconds
10 minutes later
In photo mode, press for photo shooting; In video recording mode, first press to start, press again to finish
Continuous Capture for 3 Seconds
Reset to default, can be matched with different smartphone
Auto Power-Off
Long Press for 2 Seconds
Short Press
Power OnOn-off Button
Matched with the Smartphone
No Operation
Electronic Grip
14
Indicator Light Instruction
LavalierTransmitter
Green Light Keeps On
Receiver
Electronic Grip
Red Light Keeps On
Red Light Flickers
Green Light Flickers
Green Light Keeps On
Red Light Flickers
Blue Light Flickers(After the grip turned on)
Green Light Flickers
Normal Working Status
Muting Mode
Low-power reminder
Channel doesn’t match with the transmitter
Channels matches
Low-power reminder
Grip doesn’t match with the smartphone
Taking pictures/Video Recording
15
1.Connect the belt clip to the connection hole
2.Long press the power button to turn on the Lavalier Transmitter
According to different environment you could short press ‘Power/Muting Button’ to enter the MUTE mode.
Installation and Usage
Lavalier Transmitter(TX):
Power / Muting Button
16
Audio Dynamic Display Bar
3.Insert the 3.5mm audio input line into the “Mic”socket
4.Target the Mic to the audio source and check whether the Lavalier Transmitter is working properly according to the audio display bar on the screen
“Mic”socket
17
Channel
5. Short press set button to select the channel
“set”button
18
1. Install two AA batteries into the battery tray according to the positive and negative electrode;
Hand-held Transmitter (HTX) :
A A
A A
19
2. Long Press the power button switch to turn on the hand-held transmitter;
20
When the receiver channel matches the hand-held transmitter, the green light keeps on
Green light
3. Short press the power button to make channel match the receiver;
21
1.Rotate the four clamps, then adjust the screw to appropriate height, install the phone in the neutral position; connect one end (black) of the audio output line to OUTPUT socket, the other end (gray TRRS) to mobile phone audio input socket; A 3.5mm headset can be inserted in real-time monitoring socket according to the need.
Receiver:
22
When the receiver channel matches the transmitter, the green light keeps on.
Power Button
2.Long press the power button to turn on the receiver;
3.Short press set button to make channel consistent with the transmitter, and adjust the volume to the optimal status through the volume adjusting wheel;
“set” Button
volume adjusting wheel
Receiver ChannelTransmitter Channel
23
5.Go for the normal audio recording;
4.Can be extendable for connection with LED light or other auxiliary equipment;
24
fix the receiver through the adjusting screw
1.Connect the 1/4 screw thread of the electronic grip to the 1/4 thread of the receiver, then fix the receiver through the adjusting screw;
Electronic Grip:
25
In photo shooting mode, press the remote controller for photo taking;In video mode, press the remote controller to start video, and press again to finish.
Power Button
2.Long press the power button to turn on the grip;
3.Turn on the bluetooth of the phone, match with the bluetooth named 'Viewflex - H', then you can use your smartphone for recording.
China Mobile
26
fix the receiver through the adjusting screw
press the direction control switch to adjust the direction
1. Connect the receiver with the tripod through the 1/4 screw thread, fix the receiver by adjusting the adjustable screw, press the direction control switch to adjust the direction;
Tripod on Table:
27
Specification
>65dB1/4 Wavelength Wire Antenna<-60dBc<20ms<0.5%3.5mm socketPolymer Lithium Battery 3.7V 1150mAH8 HoursMicro USB85 x 59 x 16.3 mm0℃ ~ +50℃-20℃ ~ +60℃
Signal / NoiseAntennaStray RadiationSound DelayAudio DistortionAudio Input SocketBatteriesEnduranceCharging SocketDimensionOperating TemperatureStorage Temperature
Lavalier Transmitter (TX) :
28
>65dBPCB Antenna<-60dBc<20ms<0.5%2pcs AA BatteryΦ 53.5 (MAX) x 248mm0℃ ~ 50℃-20℃ ~ 60℃
Signal/NoiseAntennaStray RadiationSound DelayAudio DistortionBatteryDimensionOperating TemperatureStorage temperature
Hand-held Transmitter (HTX):
29
>65dB1/4Wavelength Wire Antenna-95dBm<20ms<0.5%20Hz ~ 18KHz3.5mmSocketPolymer Lithium Battery 3.7V 1150mAH8 HoursMicro USB104 x 57.6 x 16.3mm0℃ ~ +50℃-20℃ ~ +60℃
Signal / NoiseAntennaReceiving SensitivitySound DelayAudio DistortionFrequency ResponseAudio Input SocketBatteriesEnduranceCharging SocketDimensionCharging SocketStorage Temperature
Receiver:
30
3.010mCR2032 x 110 minutes35 x 25 x 8.4mm
Bluetooth VersionEffective Distance BatteryAuto power-off time with no operationDimension
Bluetooth Electronic Grip:
31
Email: [email protected]