for steel panels - dimensional metals, inc.dynaclad ap synthetic underlayment dynaclad ap synthetic...

PANEL EXPANSION NOTEFOR STEEL PANELS < 40' WITH A 1 1/2" TURN DOWN AND 1 1/2" HEM CLEARANCE:1. 1/4" FOR INSTALLATION TEMPERATURE BELOW 30 DEGREES FARENHEIT2. 1/2" FOR INSTALLATION TEMPERATURE ABOVE 30 DEGREES FARENHEIT..

FOR STEEL PANELS > 40' WITH A 2" TURN DOWN AND 2" HEM CLEARANCE:1. 1/4" FOR INSTALLATION TEMPERATURE BELOW 30 DEGREES FARENHEIT.2. 1/2" FOR INSTALLATION TEMPERATURE ABOVE 30 DEGREES FARENHEIT.

FOR ALUMINUM PANELS - CONTACT DMI

GUTTER LAP NOTELAP GUTTER 3" MIN W/ 2 ROWS OF APPROVED SEALANT AND POP RIVET JOINT 2" O.C. SET IN AND CAP POPRIVETS IN APPROVED SEALANT.

FLASHING LAP NOTELAP FLASHINGS 2" MIN W/ 1 ROW OF BUTYL SEALANT.

ICE AND WATER UNDERLAYMENT NOTEFULL ICE AND WATER UNDERLAYMENT REQUIRED. STRIP IN DRIP EDGE WITH 6" OF APPROVED ICE ANDWATER UNDERLAYMENT.

12" FROM END OF P

ANEL

(GU) - DMI CONTINUOUS GUTTER

(GS) - DMI CONTINUOUSGUTTER STRAP 30" O.C. MAX.

DMI DL15 EXPANSION PANEL CLIP 30" O.C. MAX(FASTENED WITH 2 #14-13 X 1 1/2" MIN. DP1

FASTENERS PENETRATING WOOD DECK 3/4" MIN)

DL15 DMI PANEL SYSTEM

(DE) - DRIP EDGEFIELD FOLD END OF PANEL

FILL PANEL VOID AS NECESSARYWITH APPROVED SEALANT

INJECT TWO ROWS OF BUTYLSEALANT IN VERTICAL LEG

(DS) - DOWNSPOUT

(DR) - DROP

POP RIVET (EIGHT PEROUTLET) AND SEAL WITH

NOVA FLEX OR EQUAL

PLYWOOD SHEATHING (MIN.5/8" THICK)

#10-13 GP PANCAKE HEADFASTENER 6" O.C. (STAGGERED)#10-13 GP PANCAKEHEAD FASTENER 12" O.C.

#14-13 DP1 FASTENER 30" O.C.

WOOD BLOCKING

(FW) - FASCIA WRAP

DYNACLAD ULTRA HT WIND & WATER SEALUNDERLAYMENT TO EXTEND DOWN

EAVE 4” MIN. AND OVER THE TOP OF THEFASCIA WRAP AND NAILED INTO FASCIA 6” O.C.

DYNACLAD AP SYNTHETICUNDERLAYMENT

01/17 3"=1'-0"DIMENSIONAL METALS, INC.

PROVEN DEPENDABLE SUSTAINABLE

METAL ENVELOPE SYSTEMS SINCE 1988

WWW.DMIMETALS.COM

Issue/Rev Date: Scale:

Detail:ARCHITECTURAL EAVE W/ GUTTER DL15 01-00-WA





ICE AND WATER UNDERLAYMENT NOTEFULL ICE AND WATER UNDERLAYMENT REQUIRED. STRIP IN DRIP EDGE WITH 6" OF APPROVED ICE AND WATERUNDERLAYMENT.

12" FROM END OF P

ANEL







#10-13 GP PANCAKEHEAD FASTENER 12" O.C.


DYNACLAD ULTRA HT WIND & WATER SEALUNDERLAYMENT TO EXTEND DOWN

EAVE 4” MIN. AND OVER THE TOP OF THEFASCIA WRAP AND NAILED INTO FASCIA 6” O.C.

WOOD BLOCKING(FW) - FASCIA WRAP

#10-13 GP PANCAKE HEADFASTENER 6" O.C. (STAGGERED)





WWW.DMIMETALS.COM


Detail:ARCHITECTURAL EAVE W/ FASCIA WRAP DL15 01-01-WA


FOR STEEL PANELS > 40' WITH A 2" TURN DOWN AND 2" HEM CLEARANCE:1. 1/4" FOR INSTALLATION TEMPERATURE BELOW 30 DEGREES FARENHEIT.

2. 1/2" FOR INSTALLATION TEMPERATURE ABOVE 30 DEGREES FARENHEIT.


GUTTER NOTESLAP GUTTER 3" MIN W/ 2 ROWS OF APPROVED SEALANT AND POP RIVET JOINT 2" O.C. SET IN AND CAP POPRIVETS IN APPROVED SEALANT.EXPANSION JOINT REQUIRED FOR EVERY 50'-0" OF GUTTER (REFER TO MISCELLANEOUS DETAILS)


ICE AND WATER UNDERLAYMENT NOTEFULL ICE AND WATER UNDERLAYMENT REQUIRED. STRIP IN DRIP EDGE WITH 6" OF APPROVED ICE ANDWATER UNDERLAYMENT.

12" FROM END OF P

ANEL



#14-13 DP1 FASTENER 30" O.C.

PLYWOOD SHEATHING






DYNACLAD ULTRA HT WIND & WATERSEAL UNDERLAYMENT TO EXTEND

DOWN EAVE 4” MIN. AND OVER THETOP OF THE FASCIA WRAP AND

NAILED INTO FASCIA 6” O.C.

(SI) - SILLFASCIA PANEL

(GU) - DMI CONTINUOUS GUTTER

(GS) - DMI CONTINUOUSGUTTER STRAP 30" O.C. MAX.

(DS) - DOWNSPOUT(DR) - DROP

(SI) - SILL#10-13 GP PANCAKEHEAD FASTENER 12" O.C.



POP RIVET (EIGHT PEROUTLET) AND SEAL WITH

NOVA FLEX OR EQUAL


DYNACLAD AP SYNTHETICUNDERLAYMENT (EXTEND UNDERUPPER SILL AND OVER LOWER SILL)




WWW.DMIMETALS.COM


Detail:ARCHITECTURAL EAVE W/ GUTTER DL15 01-02-WA

PANEL EXPANSION NOTEFOR STEEL PANELS < 40' WITH A 1 1/2" TURN DOWN AND 1 1/2" HEMCLEARANCE:1. 1/4" FOR INSTALLATION TEMPERATURE BELOW 30 DEGREES FARENHEIT2. 1/2" FOR INSTALLATION TEMPERATURE ABOVE 30 DEGREES FARENHEIT..

FOR STEEL PANELS > 40' WITH A 2" TURN DOWN AND 2" HEMCLEARANCE:1. 1/4" FOR INSTALLATION TEMPERATURE BELOW 30 DEGREES FARENHEIT.2. 1/2" FOR INSTALLATION TEMPERATURE ABOVE 30 DEGREES FARENHEIT.



ICE AND WATER UNDERLAYMENT NOTEFULL ICE AND WATER UNDERLAYMENT REQUIRED. STRIP IN DRIP EDGE WITH 6" OFAPPROVED ICE AND WATER UNDERLAYMENT.

12" FROM END OF P

ANEL


FASTENERS PENETRATING WOOD DECK 3/4" MIN)DL15 DMI PANEL SYSTEM






(JC) - J CLOSURE



PLYWOOD SHEATHING

(SI) - SILL

FASCIA PANEL


DOWN EAVE 4” MIN. OVER SILL ANDNAILED DOWN 6” O.C.





WWW.DMIMETALS.COM


Detail:ARCHITECTURAL EAVE W/ FASCIA PANEL DL15 01-03-WA

(CF) - CAP FLASHING

BUTYL SEALANT(APPLY LIBERALLY)

(CL) - CLEAT#10-13 GP PANCAKE

HEAD FASTENER 12" O.C.

(CL) - CLEAT

E.I.F.S.

PANEL EXPANSION NOTEFOR STEEL PANELS < 40' WITH A 1 1/2" TURN DOWN AND 1 1/2" HEM CLEARANCE:1. 1/4" FOR INSTALLATION TEMPERATURE BELOW 30 DEGREES FARENHEIT

2. 1/2" FOR INSTALLATION TEMPERATURE ABOVE 30 DEGREES FARENHEIT..



INTERIOR GUTTER DESIGN TO BE PER SMACNA GUIDELINES


ICE AND WATER UNDERLAYMENT NOTEFULL ICE AND WATER UNDERLAYMENT REQUIRED. STRIP IN DRIP EDGE WITH 6" OF APPROVED ICE AND WATERUNDERLAYMENT.

12" FROM END OF P

ANEL









PLYWOOD SHEATHING

WOOD BLOCKING

60 MIL EPDM EXTEND UP ROOF 24" MIN.AND DOWN FASCIA 4" MIN.


BUTYL SEALANT




WWW.DMIMETALS.COM


Detail:ARCHITECTURAL EAVE W/ BUILT IN GUTTER DL15 01-04-WA

12" MAXIMUM

EXPANSION NOTERIDGES EXCEEDING 100'-0" IN LENGTH REQUIRE THE USE OF A 6" COVER PLATE.

FLASHING LAP NOTELAP RIDGE/HIP 4" MIN W/ 2 ROWS OF BUTYL SEALANT.DO NOT POP RIVET LAPPED FLASHINGS.



BOX END OF PANEL AND INJECTAPPROVED SEALANT IN CORNERS

(RI / HI) - RIDGE / HIP

TWO CONTINUOUSROWS OF BUTYL TAPE

FOUR #10-13 X 1" GP PANCAKEHEAD FASTENERS PER PANEL MIN.

INJECT APPROVED SEALANTBETWEEN PANEL LEG AND Z CLOSURE

(ZC) - ZEE CLOSURE (SEE SHEETFOR INSTALLATION INSTRUCTIONS)

POP RIVET 8" O.C.


DMI DL15 EXPANSION PANEL CLIP30" O.C. MAX (FASTENED WITH 2#14-13 X 1 1/2" MIN. DP1 FASTENERSPENETRATING WOOD DECK 3/4" MIN)

1/4" WOOD FILLER




WWW.DMIMETALS.COM


Detail:ARCHITECTURAL RIDGE DL15 02-00-WA

12" MAXIMUM



VENTILATION NOTEDMI PERFORATED Z CLOSURE PROVIDES 23% NET FREE AIR MOVEMENT.HIP CONDITIONS CAN NOT BE VENTED.

1"

1"





OPTIONAL VENTING FABRIC (PZC) - PERFORATEDZEE CLOSURE

8-15 X 9/16" LATHHEAD SCREW 12" O.C.


(VRI) - VENTED RIDGE

POP RIVET 8" O.C.


FOUR #10-13 X 1" GP PANCAKEHEAD FASTENERS PER PANEL MIN.


INJECT APPROVEDSEALANT BETWEEN PANEL

LEG AND Z CLOSURE




WWW.DMIMETALS.COM


Detail:ARCHITECTURAL VENTED RIDGE DL15 02-01-WA

AutoCAD SHX Text

2"

2" CAP OVERLAP



6" COVER PLATE

2 ROWS OF BUTYL SEALANT EACH SIDE

TONG HEMS AROUND CAPS




WWW.DMIMETALS.COM


Detail:ARCHITECTURAL RIDGE COVER PLATE DL15 02-02-WA


FOR STEEL PANELS > 40' WITH A 2" TURN DOWN AND 2" HEM CLEARANCE:1. 1/4" FOR INSTALLATION TEMPERATURE BELOW 30 DEGREES FARENHEIT.

2. 1/2" FOR INSTALLATION TEMPERATURE ABOVE 30 DEGREES FARENHEIT.

PANELS EXCEEDING 40' ADD 1" PER 10' TO EACH SIDE.FOR ALUMINUM PANELS - CONTACT DMINOP POP RIVETS OR FASTENERS ON EXPOSED WEATHER SIDE OF CLEAT.

INVERTED V NOTEON ROOF PITCHES OVER 6:12 OR PANEL LENGTHS EXCEEDING 60' OR ON DISSIMILAR PITCHES INCREASE THEINVERTED V IN THE VALLEY TO 2".

FLASHING LAP NOTELAP VALLEY 8" MIN. WITH 2 ROWS OF APPROVED SEALANT.

12" FROM END OF PANEL

6" MIN.6" MIN. LAP

(VA) - VALLEY(CL) - CLEAT


FIELD FOLD END OF PANEL

INJECT TWO ROWS OF APPROVEDSEALANT IN VERTICAL LEG



DYNACLAD ULTRA HT WIND &WATER SEAL UNDERLAYMENT


#10-13 GP PANCAKEHEAD FASTENERS 3" O.C.

INVERTED V 1" MIN.(SEE NOTE ABOVE)





WWW.DMIMETALS.COM


Detail:ARCHITECTURAL VALLEY DL15 03-00-WA

FLASHING LAP NOTELAP RAKE EDGE AND FASCIA 2" MINIMUM WITH 1 ROW OF BUTYL SEALANT.

FIELD FOLD SIDE OF PANEL


(RE) - RAKE EDGE

(FW) - FASCIA WRAP



WOOD BLOCKING




DOWN RAKE EDGE 4” MIN. AND OVERTHE TOP OF THE FASCIA WRAP AND


1/4" WOOD FILLER




WWW.DMIMETALS.COM


Detail:ARCHITECTURAL RAKE EDGE DL15 04-00-WA

FLASHING LAP NOTELAP RAKE EDGE AND FASCIA 2" MINIMUM WITH 2 ROWS OF BUTYL SEALANT.


#10-13 GP PANCAKE HEAD FASTENER.SEAL HEADS WITH BUTYL SEALANT.

DYNACLAD AP SYNTHETICUNDERLAYMENTDYNACLAD ULTRA HT WIND & WATER

SEAL UNDERLAYMENT TO EXTENDDOWN RAKE EDGE 4” MIN. AND OVERTHE TOP OF THE FASCIA WRAP AND


(JC) - J CLOSURE

(RA) - RAKE EDGE

(FW) - FASCIA WRAP

WOOD BLOCKING

ONE CONTINUOUSROW OF BUTYL TAPE

POP RIVET 12" O.C. DONOT PENETRATE PANEL LEG


(CL) - CLEAT





WWW.DMIMETALS.COM




(FW) - FASCIA WRAP


WOOD BLOCKING

WOOD BLOCKING

FULL DYNACLAD ULTRA HTWIND & WATER SEAL UNDERLAYMENT

TO EXTEND DOWN RAKEEDGE 4” MIN. AND OVER THE TOP OFTHE FASCIA WRAP AND NAILED INTO

FASCIA 6” O.C.

ONE CONTINUOUS ROW OFBUTYL TAPE ON BOTH SIDES

1/4-14 X 7/8" DP1 LAP ZAC ZINCCAP W/ EPDM WASHER @ 12" O.C.

(RA) - ANGLE

(SRA) - RAKE ANGLEW/SLOTTED HOLES IN

BOTTOM LEG TO ALLOWTHERMAL MOVEMENT

ONE CONTINUOUS ROW OFBUTYL TAPE ON BOTH SIDES

(RE) - RAKE EDGE

(CL) - CLEAT

SHOULDER BOLT 24" O.C.


FLASHING LAP NOTELAP RAKE EDGE AND FASCIA 2" MINIMUM WITH 2 ROWS OF BUTYL SEALANT.




WWW.DMIMETALS.COM



NOTEREGLET FLASHING TO BE INSTALLED BELOW ALL WEEP HOLES.SURFACED MOUNT COUNTERFLASHINGS NOT ACCEPTABLE..

FLASHING LAP NOTELAP (RW) - RAKE WALL REGLET 2" MINIMUM WITH 2 ROWS OF BUTYL SEALANT.

6"8"


POP RIVET 12" O.C.

MASONRY

WEDGE SPACED 12" O.C.CONTINUOUS NOVA FLEX SEALANT

(RC) - REGLET COUNTERFLASHING(RW) - RAKE WALL

MASONRY WEEP THROUGHWALL FLASHING

STAINLESS STEEL CAVITYWALL FLASHING




(EXTEND UP WALL 8" MIN.)


1/4" WOOD FILLER




WWW.DMIMETALS.COM


Detail:ARCHITECTURAL RAKE WALL DL15 05-00-WA

FLASHING LAP NOTELAP (RW) - RAKE WALL AND RAT GUARD (SLOPED) 2" MINIMUM WITH 2 ROWS OF BUTYL SEALANT.

6"

2"

8"


WALL PANEL

(RG) - RAT GUARD (SLOPED)


POP RIVET 12" O.C.


(RW) - CURVED (RW) - RAKE WALL

APPROVED MOISTURE BARRIER





1/4" WOOD FILLER

PLYWOOD SHEATHING




WWW.DMIMETALS.COM



FLASHING LAP NOTELAP RAKE WALL AND RAT GUARD (SLOPED) 2" MINIMUM WITH 2 ROWS OF BUTYL SEALANT.

2"8"


POP RIVET 12" O.C. DO NOTPENETRATE PANEL LEG

(JC) - J CLOSURE

#10-13 GP PANCAKE HEADFASTENER 12" O.C. SET IN AND

CAP WITH APPROVED SEALANTPLYWOOD SHEATHING

WALL PANEL

(RG) - RAT GUARD (SLOPED)

(RW) - RAKE WALL











WWW.DMIMETALS.COM



NOTE: INTEGRATE COUNTER FLASHINGINTO NEW MASONRY THRU WALL FLASHING

NOVA FLEX CONTINUOUS SEALANT

(RC) - REGLET COUNTERFLASHING

(RW) - RAKE WALL

1/4-14 X 7/8" DP1 LAP ZAC ZINCCAP W/ EPDM WASHER @ 8" O.C.

SHOULDER BOLT 24" O.C.

FULL DYNACLAD ULTRA HT WINDAND WATER SEAL UNDERLAYMENT

TO EXTEND UP WALL 8"

MASONRY


(SRA) - RAKE ANGLEW/SLOTTED HOLES INBOTTOM LEG TO ALLOWTHERMAL MOVEMENT

(RA) - ANGLE

3/16" SAWCUT REGLET

WEDGE SPACED 6" O.C.



NOTEREGLET FLASHING TO BE INSTALLED BELOW ALL WEEP HOLES.

SURFACED MOUNT COUNTERFLASHINGS NOT ACCEPTABLE..

FLASHING LAP NOTELAP (RW) - RAKE WALL REGLET 2" MINIMUM WITH 2 ROWS OF BUTYL SEALANT.




WWW.DMIMETALS.COM



FLASHING LAP NOTELAP APRON AND RAT GUARD (SLOPED) 2" MINIMUM WITH 2 ROWS OF BUTYL SEALANT.

12" MAXIMUM

3" M

IN.

DMI DL15 EXPANSION PANEL CLIP30" O.C. MAX (FASTENED WITH 2

#14-13 X 1 1/2" MIN. DP1 FASTENERSPENETRATING WOOD DECK 3/4" MIN)


FOUR #10-13 GP PANCAKE HEADFASTENERS PER PANEL MIN.

POP RIVET 8" O.C.

DYNACLAD AP SYNTHETIC UNDERLAYMENTTO EXTEND UP WALL 8"

(AP) - APRON

WALL PANEL

(RG) - RAT GUARD


INJECT APPROVED SEALANTBETWEEN PANEL AND Z CLOSURE



#10-13 GP PANCAKE HEADFASTENERS 12" O.C.

1/4" WOOD FILLER





WWW.DMIMETALS.COM


Detail:ARCHITECTURAL APRON W/ WALL PANEL DL15 06-00-WA

NOTEREGLET FLASHING TO BE INSTALLED BELOW ALL WEEP HOLES.

SURFACED MOUNT COUNTERFLASHINGS NOT ACCEPTABLE..

FLASHING LAP NOTELAP APRON AND REGLET 2" MINIMUM WITH 2 ROWS OF BUTYL SEALANT.

12" MAXIMUM3"

MIN

.





DYNACLAD AP SYNTHETIC UNDERLAYMENTTO EXTEND UP WALL 8"

(AP) - APRON





MASONRY

MASONRY FASTENER@ 12" O.C.






CONTINUOUS NOVA FLEX SEALANT

1/4" WOOD FILLER

POP RIVET 8" O.C.




WWW.DMIMETALS.COM


Detail:ARCHITECTURAL APRON DL15 06-01-WA

1"1"

1"

FLASHING LAP NOTELAP APRON AND RAT GUARD (SLOPED) 2" MIN W/ 2 ROWS OF BUTYL SEALANT.DO NOT POP RIVET LAPPED FLASHINGS.

VENTILATION NOTEDMI PERFORATED Z CLOSURE PROVIDES 23% NET FREE AIR MOVEMENT.

12" MAXIMUM3"

MIN

.




#10-13 GP PANCAKE HEADFASTENERS 12" O.C.


OPTIONAL VENTING FABRIC(PZC) - PERFORATED Z CLOSURE

8-15 X 9/16" LATH HEAD SCREW 12" O.C.

(AP) - APRON

APPROVED MOISTURE BARRIERWALL PANEL

(RG) - RAT GUARD


(ZC) - ZEE CLOSURE (SEE SHEET FORINSTALLATION INSTRUCTIONS)



POP RIVET 8" O.C.



1/4" WOOD FILLER

PLYWOOD SHEATHING




WWW.DMIMETALS.COM


Detail:ARCHITECTURAL VENTED APRON DL15 06-02-WA

1"1"

1"

12" MAXIMUM


FLASHING LAP NOTELAP APRON AND RAT GUARD (SLOPED) 2" MIN W/ 2 ROWS OF BUTYL SEALANT.DO NOT POP RIVET LAPPED FLASHINGS.

VENTILATION NOTEDMI PERFORATED Z CLOSURE PROVIDES 23% NET FREE AIR MOVEMENT.

3" M

IN.


DMI DL15 EXPANSION PANELCLIP 30" O.C. MAX (FASTENEDWITH 2 #14-13 X 1 1/2" MIN. DP1

FASTENERS PENETRATINGWOOD DECK 3/4" MIN)


(AP) - APRON

WEDGE SPACED 12" O.C.CONTINUOUS NOVA FLEX SEALANT(RC) - REGLET COUNTERFLASHING

MASONRY WEEPTHROUGH WALL FLASHING

STAINLESS STEELCAVITY WALL FLASHING








POP RIVET 8" O.C.

MASONRY



1/4" WOOD FILLER




WWW.DMIMETALS.COM


Detail:ARCHITECTURAL VENTED APRON DL15 06-03-WA

FLASHING LAP NOTELAP APRON AND REGLET 2" MINIMUM WITH 2 ROWS OF BUTYL SEALANT.

12" MAXIMUM

(AP) - APRON

POP RIVET 8" O.C.(ZC) - ZEE CLOSURE (SEE SHEET

FOR INSTALLATION INSTRUCTIONS)DYNACLAD AP SYNTHETIC

UNDERLAYMENT TO EXTEND UP WALL 8"


FOUR #10-13 GP PANCAKE HEADFASTENERS PER PANEL MIN.INJECT APPROVED SEALANT

BETWEEN PANEL AND Z CLOSURE






1/4" WOOD FILLER

3"

1-1/4" SS RING SHANKNAIL 12" O.C.

(CO) - DYNACLAD EDGESNAP-ON COPING

(AC) - ANCHOR CLEAT#9-15 X 1-1/2" SS FASTENER

(4 PER ANCHOR CLEAT)MEMBRANE




WWW.DMIMETALS.COM


Detail:ARCHITECTURAL APRON W/ COPING DL15 06-04-WA

EXPANSION NOTEPEAK CAPS EXCEEDING 100'-0" IN LENGTH REQUIRE THE USE OF A 6" COVER PLATE.

FLASHING LAP NOTELAP PEAK AND CLEATS 2" MIN W/ 2 ROWS OF BUTYL SEALANT.

DO NOT POP RIVET LAPPED FLASHINGS.

12" MAXIMUM

DMI DL15 EXPANSION PANEL CLIP 30"O.C. MAX (FASTENED WITH 2 #14-13 X

1 1/2" MIN. DP1 FASTENERSPENETRATING WOOD DECK 3/4" MIN)



POP RIVET 8" O.C.


DOWN FACE 4" MIN.1/4" WOOD FILLER

POP RIVET 12" O.C.

MEMBRANE ROOFING






(CL) - CLEAT


PLYWOOD SHEATHING

(PC) - PEAK CAP




WWW.DMIMETALS.COM


Detail:ARCHITECTURAL PEAK DL15 07-00-WA


FLASHING LAP NOTELAP PEAK AND CLEATS 2" MIN W/ 2 ROWS OF BUTYL SEALANT.DO NOT POP RIVET LAPPED FLASHINGS.

12" MAXIMUM





PLYWOOD SHEATHING (5/8"MIN. THICKNESS)



POP RIVET 8" O.C.

DYNACLAD AP SYNTHETICUNDERLAYMENT DOWN FACE 4" MIN.

POP RIVET 12" O.C.

WALL PANEL

(PC) - PEAK CAP



PLYWOOD SHEATHING

(JC) - J CLOSURE


1/4" WOOD FILLER





WWW.DMIMETALS.COM


Detail:ARCHITECTURAL PEAK W/ WALL PANEL DL15 07-01-WA

1"1"

1"

12" MAXIMUM

DMI DL15 EXPANSION PANELCLIP 30" O.C. MAX (FASTENEDWITH 2 #14-13 X 1 1/2" MIN. DP1

FASTENERS PENETRATINGWOOD DECK 3/4" MIN)DL15 DMI PANEL SYSTEM








POP RIVET 8" O.C.



1/4" WOOD FILLER


FLASHING LAP NOTELAP PEAK AND CLEATS 2" MIN W/ 2 ROWS OF BUTYL SEALANT.DO NOT POP RIVET LAPPED FLASHINGS.

POP RIVET 12" O.C.

MEMBRANE ROOFING

(CL) - CLEAT


PLYWOOD SHEATHING

(PC) - PEAK CAP




WWW.DMIMETALS.COM


Detail:ARCHITECTURAL VENTED PEAK DL15 07-02-WA

±

FLASHING LAP NOTELAP EXPANSION JOINT AND J CLOSURE 2" MINIMUM WITH 2 ROWS OF BUTYL SEALANT.

CONTINUOUS FLEXIBLE MEMBRANE -EXTEND 12" MIN. IN EACH DIRECTION.

#10-13 GP PANCAKE HEADFASTENER 12" O.C. SET IN ANDCAP WITH APPROVED SEALANT

WOOD BLOCKING

BUILDING EXPANSION FROM DESIGNDRAWINGS OR FIELD DIMENSIONS




POP RIVET 12" O.C. DONOT PENETRATE PANEL LEG

(EJ) - EXPANSION JOINT

BATT INSULATION

(JC) - J CLOSURE





WWW.DMIMETALS.COM


Detail:ARCHITECTURAL EXPANSION JOINT DL15 08-00-WA

AutoCAD SHX Text

a

AutoCAD SHX Text

a+1/4"

AutoCAD SHX Text

a-1/4"

AutoCAD SHX Text

2a

±


FLASHING LAP NOTELAP RAKE WALL AND REGLET 2" MINIMUM WITH 2 ROWS OF BUTYL SEALANT.

BUILDING EXPANSIONFROM DESIGN DRAWINGSOR FIELD DIMENSIONS


#10-13 GP PANCAKE HEADFASTENER 12" O.C. SET IN AND

CAP WITH APPROVED SEALANT BATT INSULATION

(RWEJ) - RAKE WALL EXPANSION JOINT

(JC) - J CLOSURE




MASONRY


CONTINUOUS NOVA FLEX SEALANT








WWW.DMIMETALS.COM


Detail:ARCHITECTURAL EXPANSION RAKEWALL DL15 09-00-WA

AutoCAD SHX Text

a

AutoCAD SHX Text

a-1/4"

AutoCAD SHX Text

2a

AutoCAD SHX Text

a+1/4"

18" MIN.





8" M

IN.

12" FROM END OF PANEL

MEMBRANE ROOFINGEXTENED UP ROOF 36" MIN.

(TF) - TRANSITION FLASHING

FIELD FOLD END OF PANEL









PLYWOOD SHEATHING (5/8"MIN. THICKNESS)




WWW.DMIMETALS.COM


Detail:ARCHITECTURAL TRANSITION DL15 10-00-WA

3/4"3/4"

NOTEDO NOT ATTACH INTO SOLID SUBSTRATE BELOW.BOOT SHALL NOT INTERSECT STANDING SEAM VERTICAL LEG. INSTALL IN FLAT AREA OF PANEL ONLY.IF USING A SQUARE BOOT DETAIL BE SURE TO SET BOOT IN A DIAGONAL OR DIAMOND TO ALLOW WATER FLOW.

DEKTITE PIPE BOOT OR EQUAL

DMI PANEL SYSTEM

ADJUSTABLE STAINLESS STEEL BAND

1/4-14 X 7/8" STAINLESS PANEL LAPFASTENERS OR EQUAL 2" O.C.

THROUGH COMPRESSION RING (SETIN SEALANT).

CONTINUOUS APPROVED SEALANT

DMI PANEL SYSTEM

1" MIN.

1/4 X 1 1/8" STAINLESS TEKSFASTENERS OR EQUAL 2" O.C.

THROUGH COMPRESSION RINGDEKTITE PIPE BOOT OR EQUAL




WWW.DMIMETALS.COM


Detail:ARCHITECTURAL PIPE BOOT DETAIL DL15 11-00-WA

SECTION "B"

SECTION "A"

CURB DETAIL INSTRUCTIONS

B

4'-0" WIDTH OR LESS

B

A

6" OVERLAP

EXTEND BACK 2" MIN. PAST EDGE OFRAKE FLASHING

FIELD FOLD AROUND CLEAT

ANTI-SIPHON HEM

DMI PANEL SYSTEMINJECT TWO ROWS OF APPROVED SEALANT IN

VERTICAL SEAM LEG

CLEAT FASTENED AT 6" O.C. SET IN TWOROWS OF BUTYL TAPE

APPROVED UNDERLAYMENTBOX ENTIRE CURB WITH 36" OF SELF

ADHERED ICE AND WATER UNDERLAYMENT1'-0"

FIELD WRAP AROUND FLASHING

CURB VALLEY FLASHING

CURB CAP FLASHING

METAL CURB

CURB CAP FLASHINGCURB APRON

POP RIVET 12" O.C.

DMI PANEL SYSTEM

INJECT APPROVED SEALANT BETWEEN PANELLEG AND Z CLOSURE

BOX END OF PANEL TO FULLLEG HEIGHT AND INJECT

APPROVED SEALANT INCORNERS

Z CLOSURE FASTENED 6" O.C. FOR RAKE EDGEAND 4 FASTENERS PER PANEL FOR APRON.

SET IN TWO ROWS OF BUTYL TAPE.

6" MIN. OPENING BETWEENCURB AND PANEL LEG




WWW.DMIMETALS.COM


Detail:ARCHITECTURAL CURB DL15 12-00-WA

Install zee closure.

1

2 34

Step 1: Seam PanelStep 3: Notch zee closure.Step 4: Apply two rows of butyl tape to

underside of zee.Step 5:Step 6: Seal all contact points of zee and panel legs.

Also seal over top of panel leg.

5

A

SECTION A-A

TWO ROWS OF BUTYL TAPE

A

FASTENERS PERSHOP DRAWINGS

4




WWW.DMIMETALS.COM


Detail:ARCHITECTURAL Z INSTALLATION GUIDE DL15 13-00-WA

for steel panels - dimensional metals, inc.dynaclad ap synthetic underlayment dynaclad ap synthetic...

Documents