forced air system - central boiler · h c m r hot supply water-to-water heat exchanger bypass line...

1
H C M R Hot Supply Water-to-Water Heat Exchanger Bypass Line Hot Supply from Pump on Outdoor Furnace Return to Outdoor Furnace Thermostatic Valve (optional) Thermostatic Mixing Valve This horizontal assembly must not exceed a height of 4 inches above top of water heater. Existing Water Heater 1" Central PEX ® Optional 3-Way Bypass Valve Heat Exchanger Plenum Existing Forced Air Furnace NOTE Installer must comply with all applicable codes and regulations. NOTE Outdoor furnace water temperature setpoint should be set at 185˚F minimum. For illustration purposes only, water heater styles may vary. NOTE A pump must be installed in the hot supply line between the outdoor furnace and thermostatic valve. Forced Air System

Upload: vuongbao

Post on 13-Jun-2019

215 views

Category:

Documents


0 download

TRANSCRIPT

HC

M

R

Hot Supply

Water-to-WaterHeat Exchanger

Bypass Line

Hot Supply from Pumpon Outdoor Furnace

Return to Outdoor Furnace

Thermostatic Valve (optional)

Thermostatic Mixing Valve

This horizontal assemblymust not exceed a height

of 4 inches above topof water heater.

ExistingWaterHeater

1" Central

PEX®

Optional 3-WayBypass Valve

HeatExchanger

Plenum

ExistingForced AirFurnace

NOTEInstaller must comply withall applicable codes andregulations.

NOTEOutdoor furnace watertemperature setpoint shouldbe set at 185˚F minimum.

For illustration purposes only, water heater styles may vary.

NOTEA pump must be installed in the hot supply line between the outdoor furnaceand thermostatic valve.

Forced Air System