READ BEFORE YOU BEGIN

• CLEAR A SPACE TO WORK ON

• STUDY THE ASSEMBLY DRAWINGS

BEFORE YOU BEGIN

• EACH PLASTIC PART IS IDENTIFIED BY A

PART NUMBER

• DO NOT OVER TIGHTEN SCREWS

• SEE NOTE ABOUT APPLYING STICKERS

IN STEP #12

CAUTION:POSITION ALL PARTS IN THIS KIT

CAREFULLY. PARTS WILL ONLY SNAP TOGETHER ONCE.

Á LIRE AVANT DE COMMENCER

• DÉGAGGEZ UN ESPACE POUR TRA-

VAILLER.

• ÉTUDIEZ LES ÉTAPES DE MONTAGE

AVANT DE COMMENCER.

• CHAQUE PIÉCE EN PLASTIQUE PORTE

UN NUMÉRO DE PIÉCE.

• NE SERREZ PAS TROP LES VIS.

• LISEZ LA RE MARQUE CONCERNANT

L´APPLICATION DES AUTO COLLANTS,

´A L´ ÉTAPE 12.MISE EN GARDE:

POSITIONNEZ AVEC PRÉCAUTION TOUTES LES PIÉCES DE CE MODÉLE RÉDUIT, CAR VOUS NE POUVEZLES EMBOîTER QU’UNE

SEULE FOIS.

Ford ExpeditionFord's hot selling SUV, the Expedition becomes even hotter with its larger diameter wheels and low profile tires mounted on a lowered suspension. This SUV is no longer just a vehicle for transporting groceries. It now shows off the latest look in the automotive world, long and low. Throw a wild and crazy paint job into the mix, and you've achieved that certain look that makes this truck so special.

If you have any questions or comments, call our hotline at: (800) 833-3570or, please write to:

Revell-Monogram Consumer Service Department, 725 Landwehr Road, Northbrook, Illinois 60062

Be sure to include the plan number (85192200200), part number, description, your return address and phone number.

Visit our website: www.revell-monogram.com

* APPLY STICKERS*APPLIQUEZ LES AUTO-COLLANTS

* OPTIONAL PARTS* PIECES EN OPTION

REVELL-MONOGRAM LLC Northbrook, IL. Copyright © 2003. All rights reserved.

KIT 1922 85192210200

Step 12ANY UNUSED PARTS MAY BE DISCARDED

Sticker Placement Guide Parts Included

NOTE:When applying stickers, avoid touching the “sticky” side to prevent finger prints on stickers. Bend sticker sheet slightly to lift edge of sticker & use a fingernail to lift

sticker from sheet. Line up sticker on body and press an edge into place, slowly working sticker with a finger nail until sticker is fully on model.

REMARQUE :Pendant l’application des autocollants, éviter de toucher à la face collante pour ne pas laisser d’empreintes. Plier légèrement la feuille d’autocollants pour relever le

bord d’un autocollant, et le détacher de la feuille avec le bout d’un ongle. Aligner l’autocollant sur la carrosserie, appuyer pour coller un de ses bords, et continuer de l’appliquer lentement du bout de l’ongle jusqu’à ce qu’il soit complètement collé sur le modèle réduit.

Step 11Step 10

9

4 5

14(NOT USED)

13

15

16 17

3

6

12

124

23

22

21

CHROME

BODYTRANSPARENT GRAY

TRANSPARENT RED

TIRES

METAL AXLES

SCREWS

26

2827

1

210

18

11

19

31 30

Screws

23Rear Bumper

(Chrome)

28Right SideHeadlight

(Transparent Gray)

27Left SideHeadlight

(Transparent Gray)

21Front Grille(Chrome)

16Right Side

Mirror

17Left Side

Mirror

15Roof Rack Supports

4

7REPEAT ON OTHER SIDE

USING DECAL 8

5REPEAT ON OTHER SIDE

USING DECAL 6

2(OR DECAL 3)

9

Step 1 Step 2 Step 3

Step 9

Step 6Step 5

Step 4

Step 7

85192210200

Step 8

Step 10 Step 11 Step 12

12Rear Seat

(Front)

13Rear Seat

(Back)

3Interior Floor

18Passenger Side

Front Seat (Front)

19Passenger Side Front

Seat (Back)

10 Driver Side Front

Seat (Front)

11Driver Side Front

Seat (Back)3

Interior Floor

DRIVER SIDE COMPLETED ASSEMBLY

PASSENGER SIDE COMPLETED ASSEMBLY

3Interior Floor

5Interior Side Panel

(Right Side)4

Interior Side Panel(Left Side)

6Dashboard

9Steering Wheel

1Gauge Sticker

FIRST

COMPLETED DASHBOARD ASSEMBLY

COMPLETED INTERIOR

ASSEMBLY

(Remove Tab)

(Remove Tab)

1Body

31Rear Taillight

Right Side (Transparent Red)30

Rear TaillightLeft Side

(Transparent Red) Close Up View of The Rear Taillight

(Remove Tabs)

26Windows

(Transparent Gray)

1Body

Close-Up View For The Interior Fit Location

COMPLETED INTERIOR

ASSEMBLY

124Wheel Front

(Chrome)

Tire

Metal Axle

2Chassis

22Front Bumper

(Chrome)