form 29—compliance advice for building work · da form 2 – building work details approved form...
TRANSCRIPT
![Page 1: Form 29—Compliance advice for building work · DA Form 2 – Building work details Approved form (version 1.1 effective 22 JUNE 2018) made under Section 282 of the Planning Act](https://reader036.vdocuments.net/reader036/viewer/2022071103/5fdc98ff695d9a388b254874/html5/thumbnails/1.jpg)
Form 29—Compliance advice for building work
NOTE This form may be used for the purpose of a compliance certificate for regulatoryadvice under section 10(b) of the Building Act 1975 for compliance with thebuilding assessment provisions.This form is not to be used for the purposes of section 46 (Form 15) or sections32, 35B, 43, 44 or 47 (Form 16) of the Building Regulation 2006.
1. Property descriptionThe description must identify allland that is the subject of thiscompliance certificate.The lot and plan details (e.g.SP/RP) are shown on titledocuments or a rates notice. If the plan is not registered by title,provide previous lot and plan details.
Street address (include number, street, suburb/locality and postcode) Carrington StreetKowanyama Postcode 4892
Lot and plan details (attach list if necessary) 78 & 77 & 76 & 75 SP 272069
2. Building certifierThis form is for use by buildingcertifiers in performing buildingcertifying functions for regulatoryadvice about compliance with thebuilding assessment provisions.
Name (in full)Harald Weber
Company name (if applicable)All Construction Approvals
Licence numberA73379
3. Scope of worksDetail the scope of building work towhich this form applies.Note: Specify the parts (e.g. level5) or aspects (e.g. fire safetysystem, structural adequacy ordisability access) of the buildingthat are being considered.Also specify the version and/orparts of the building assessmentprovisions that have been used forchecking compliance e.g. BCA2011 or QDC MP 2.1, published 4April 2008.
Scope of work—use attachments if necessaryPart or aspect of building work Applicable building assessment provision/sDemolition of ExistingBuildings & New Constructionof Carpark Building -commercial & of Warehouse
Building Code of Australia Vol. 1
4. ComplianceProvide compliance advice in thissection e.g. emergency lightingdoes not comply with BCA clauseE4.4.
Does the building work comply with the building assessment provisions? Yes No
Please tick box to select option. Alternatively, double click on box to indicate selected tick.If no, provide details of how the work does not comply—use attachments if necessary
5. StatementThis is a statement by the buildingcertifier about whether the buildingwork detailed in section 3 of thisform complies with the buildingassessment provisions.
I, as the person identified in section 2 of this form, advise that the building workdetailed in section 3 of this form, does / does not, comply with the buildingassessment provisions.
Signature Date 15 Jul 2020
DATE RECEIVED REFERENCE NUMBER/S
Version 2 – March2013
![Page 2: Form 29—Compliance advice for building work · DA Form 2 – Building work details Approved form (version 1.1 effective 22 JUNE 2018) made under Section 282 of the Planning Act](https://reader036.vdocuments.net/reader036/viewer/2022071103/5fdc98ff695d9a388b254874/html5/thumbnails/2.jpg)
APPENDIX 1
1. Termite Control – At the time of final inspection a durable notice complying with Clause B1.4 (i)(ii) must be located in a prominent location indicating the following:
(a) The method of protection; and (b) The date of installation of the system; and (c) Where a chemical barrier is used; its life expectancy as listed on the National
Registration Authority Label; and (d) The installer’s or manufacturer’s recommendation for the scope and frequency of
future inspections for termite activity. 2. Roof stormwater to be taken to kerb and channelling or other legal point of discharge by
means as approved on the plans or method determined as satisfactory by the inspecting officer at the time of final inspection.
3. Fire extinguishers to be provided and installed in accordance with Clause E1.6 of the Building Code of Australia and Australian Standard 2444.
4. Exit doors and doors in the path of travel to an exit to be readily openable without a key
from the side that faces a person seeking egress by a single hand action on a single device located between 900mm and 1.2m from the floor in accordance with Clause D2.21 of the Building Code of Australia.
5. Emergency lighting system and illuminated exit signs to comply with Australian Standard
and New Zealand Standard 2293.1 as per the requirements of Clause E4.4 of the Building Code of Australia.
6. One set of legible, current drawings for the development must be available for inspection
on the site while work is in progress so as to comply with section 73 of the Building Act 1975.
7. This approval was made on the basis that access by people with disabilities would not be appropriate due to health and safety risks and the particular purpose for which the area is used.
8. Demolition, removal and rebuilding is to comply with Section 71 Part 3 of the Building
Act 1975. (3) Within 1 year after the giving of the approval— (a) the building work must be completed; and (b) if the building work is rebuilding, after removal, of a building or structure, either— (i) if, under the approval or a regulation, the building work must be inspected, a final inspection showing that the building work complies with the approval or regulation is carried out; or (ii) under chapter 5, a certificate of classification must be given for the building.
INSPECTIONS:
FINAL – A.C.A.
![Page 3: Form 29—Compliance advice for building work · DA Form 2 – Building work details Approved form (version 1.1 effective 22 JUNE 2018) made under Section 282 of the Planning Act](https://reader036.vdocuments.net/reader036/viewer/2022071103/5fdc98ff695d9a388b254874/html5/thumbnails/3.jpg)
DA Form 2 – Building work detailsApproved form (version 1.1 effective 22 JUNE 2018) made under Section 282 of the Planning Act 2016.
This form must be used to make a development application involving building work.
For a development application involving building work only, use this form (DA Form 2) only. The DA Forms Guide provides advice about how to complete this form.
For a development application involving building work associated and any other type of assessable development, use DA Form 1 – Development application details and parts 4 to 6 of this form (DA Form 2).
Unless stated otherwise, all parts of this form must be completed in full and all required supporting information must accompany the development application.
One or more additional pages may be attached as a schedule to this development application if there is insufficient space on the form to include all the necessary information.
Note: All terms used in this form have the meaning given under the Planning Act 2016, the Planning Regulation 2017, or the Development Assessment Rules (DA Rules).
PART 1 – APPLICANT DETAILS
1) Applicant detailsApplicant name(s) (individual or company full name) Kowanyama Aboriginal Shire CouncilContact name (only applicable for companies) Jacqui CresswellPostal address (PO Box or street address) PO Box 769Suburb BungalowState QLDPostcode 4870Country AustraliaContact number 07 4040 4507Email address (non-mandatory) [email protected] number (non-mandatory)
Fax number (non-mandatory)
Applicant’s reference number(s) (if applicable)
PART 2 – LOCATION DETAILS
2) Location of the premises (complete 2.1 and/or 2.2 if applicable)Note: Provide details below and attach a site plan for any or all premises part of the development application. For further information, see DA Forms Guide: Relevant plans.
2.1) Street address and lot on plan Street address AND lot on plan (all lots must be listed), or Street address AND lot on plan for an adjoining or adjacent property of the premises (appropriate for development in
water but adjoining or adjacent to land e.g. jetty, pontoon. All lots must be listed).
This form and any other form relevant to the development application must be used to make a development application relating to strategic port land and Brisbane core port land under the Transport Infrastructure Act 1994, and airport land under the Airport Assets (Restructuring and Disposal) Act 2008. For the purpose of assessing a development application relating to strategic port land and Brisbane core port land, any reference to a planning scheme is taken to mean a land use plan for the strategic port land, Brisbane port land use plan for Brisbane core port land, or a land use plan for airport land.
![Page 4: Form 29—Compliance advice for building work · DA Form 2 – Building work details Approved form (version 1.1 effective 22 JUNE 2018) made under Section 282 of the Planning Act](https://reader036.vdocuments.net/reader036/viewer/2022071103/5fdc98ff695d9a388b254874/html5/thumbnails/4.jpg)
Page 2 DA Form 2 – Development Application details
Version 1.1— 22 JUNE 2018
Unit No. Street No. Street Name and Type SuburbCarrington Street Kowanyama
Postcode Lot No. Plan Type and Number (e.g. RP, SP) Local Government Area(s)4871 78 SP272069 Kowanyama Aboriginal Shire Council2.2) Additional premises
Additional premises are relevant to this development application and the details of these premises have been attached in a schedule to this development application
3) Are there any existing easements over the premises?Note: Easement uses vary throughout Queensland and are to be identified correctly and accurately. For further information on easements and how they may affect the proposed development, see the DA Forms Guide
Yes – All easement locations, types and dimensions are included in plans submitted with this development application
No
PART 3 – FURTHER DETAILS
4) Is the application only for building work assessable against the building assessment provisions? Yes – proceed to 8) No
5) Identify the assessment manager(s) who will be assessing this development application
6) Has the local government agreed to apply a superseded planning scheme for this development application? Yes – a copy of the decision notice is attached to this development application The local government is taken to have agreed to the superseded planning scheme request – relevant documents
attached No
7) Information request under Part 3 of the DA Rules I agree to receive an information request if determined necessary for this development application I do not agree to accept an information request for this development application
Note: By not agreeing to accept an information request I, the applicant, acknowledge: that this development application will be assessed and decided based on the information provided when making this development
application and the assessment manager and any referral agencies relevant to the development application are not obligated under the DA Rules to accept any additional information provided by the applicant for the development application unless agreed to by the relevant parties.
Part 3 of the DA Rules will still apply if the application is an application listed under section 11.3 of the DA Rules. Further advice about information requests is contained in the DA Forms Guide.
8) Are there any associated development applications or current approvals? Yes – provide details below or include details in a schedule to this development application No
List of approval/development application
Reference Date Assessment manager
Approval Development application Approval Development application
![Page 5: Form 29—Compliance advice for building work · DA Form 2 – Building work details Approved form (version 1.1 effective 22 JUNE 2018) made under Section 282 of the Planning Act](https://reader036.vdocuments.net/reader036/viewer/2022071103/5fdc98ff695d9a388b254874/html5/thumbnails/5.jpg)
Page 3 DA Form 2 – Development Application details
Version 1.1— 22 JUNE 2018
9) Has the portable long service leave levy been paid? Yes – the yellow local government/private certifier’s copy of the receipted QLeave form is attached to this
development application No – I, the applicant will provide evidence that the portable long service leave levy has been paid before the
assessment manager decides the development application. I acknowledge that the assessment manager may give a development approval only if I provide evidence that the portable long service leave levy has been paid
Not applicableAmount paid Date paid (dd/mm/yy) QLeave levy number (A, B or E)$
10) Is this development application in response to a show cause notice or required as a result of an enforcement notice?
Yes – show cause or enforcement notice is attached No
11) Identify any of the following further legislative requirements that apply to any aspect of this development application
The proposed development is on a place entered in the Queensland Heritage Register or in a local government’s Local Heritage Register. See the guidance provided at www.des.qld.gov.au about the requirements in relation to the development of a Queensland heritage place
Name of the heritage place: Place ID:
PART 4 – REFERRAL DETAILS
12) Does this development application include any building work aspects that have any referral requirements? Yes – the Referral checklist for building work is attached to this development application No – proceed to Part 5
13) Has any referral agency provided a referral response for this development application? Yes – referral response(s) received and listed below are attached to this development application No
Referral requirement Referral agency Date referral response
Identify and describe any changes made to the proposed development application that was the subject of the referral response and the development application the subject of this form, or include details in a schedule to this development application (if applicable)
PART 5 – BUILDING WORK DETAILS
14) Owner’s details Tick if the applicant is also the owner and proceed to 15). Otherwise, provide the following information.
Name(s) (individual or company full name)
Contact name (applicable for companies)
![Page 6: Form 29—Compliance advice for building work · DA Form 2 – Building work details Approved form (version 1.1 effective 22 JUNE 2018) made under Section 282 of the Planning Act](https://reader036.vdocuments.net/reader036/viewer/2022071103/5fdc98ff695d9a388b254874/html5/thumbnails/6.jpg)
Page 4 DA Form 2 – Development Application details
Version 1.1— 22 JUNE 2018
Postal address (P.O. Box or street address)
SuburbStatePostcode
Contact numberEmail address (non-mandatory)
Mobile number (non-mandatory)
Fax number (non-mandatory)
15) Builder’s details Tick if a builder has not yet been engaged to undertake the work and proceed to 16). Otherwise provide the
following information.Name(s) (individual or company full name)
Contact name (applicable for companies)
QBCC licence or owner – builder numberPostal address (P.O. Box or street address)
SuburbStatePostcodeContact numberEmail address (non-mandatory)
Mobile number (non-mandatory)
Fax number (non-mandatory)
16) Provide details about the proposed building work a) What type of approval is being sought?
Development permit Preliminary approval
b) What is the level of assessment? Code assessment Impact assessment (requires public notification)
c) Nature of the proposed building work (tick all applicable boxes) New building or structure Repairs, alterations or additions Change of building classification (involving building work) Swimming pool and/or pool fence Demolition Relocation or removal
d) Provide a description of the work below or in an attached schedule.Demolition of existing buildings on site & construction of new sheds + amenities
e) Proposed construction materials
External walls Double brick Brick veneer Stone/concrete
Steel Timber Fibre cement
Curtain glass Aluminium Other
Frame Timber Other
Steel Aluminium
![Page 7: Form 29—Compliance advice for building work · DA Form 2 – Building work details Approved form (version 1.1 effective 22 JUNE 2018) made under Section 282 of the Planning Act](https://reader036.vdocuments.net/reader036/viewer/2022071103/5fdc98ff695d9a388b254874/html5/thumbnails/7.jpg)
Page 5 DA Form 2 – Development Application details
Version 1.1— 22 JUNE 2018
Floor Concrete Timber Other
Roof covering Slate/concrete Aluminium
Tiles Steel
Fibre cement Other
f) Existing building use/classification? (if applicable)
g) New building use/classification? (if applicable)
h) Relevant plansNote: Relevant plans are required to be submitted for all aspects of this development application. For further information, see DA Forms Guide: Relevant plans.
Relevant plans of the proposed works are attached to the development application
17) What is the monetary value of the proposed building work? $150,000.00
18) Has Queensland Home Warranty Scheme Insurance been paid? Yes – provide details below No
Amount paid Date paid (dd/mm/yy) Reference number$
PART 6 – CHECKLIST AND APPLICANT DECLARATION
19) Development application checklistThe relevant parts of Form 2 – Building work details have been completed YesThis development application includes a material change of use, reconfiguring a lot or operational work and is accompanied by a completed Form 1 – Development application details
Yes Not applicable
Relevant plans of the development are attached to this development applicationNote: Relevant plans are required to be submitted for all aspects of this development application. For further information, see DA Forms Guide: Relevant plans.
Yes
The portable long service leave levy for QLeave has been paid, or will be paid before a development permit is issued
Yes Not applicable
20) Applicant declaration
By making this development application, I declare that all information in this development application is true and correct
Where an email address is provided in Part 1 of this form, I consent to receive future electronic communications from the assessment manager and any referral agency for the development application where written information is required or permitted pursuant to sections 11 and 12 of the Electronic Transactions Act 2001Note: It is unlawful to intentionally provide false or misleading information.
Privacy –pPersonal information collected in this form will be used by the assessment manager and/or chosen assessment manager, any referral agency and/or building certifier (including any professional advisers which may be engaged by those entities) while processing, assessing and deciding the development application. All information relating to this development application may be available for inspection and purchase, and/or published on the assessment manager’s and/or referral agency’s website.Personal information will not be disclosed for a purpose unrelated to the Planning Act 2016, Planning Regulation 2017 and the DA Rules except where: such disclosure is in accordance with the provisions about public access to documents contained in the Planning
Act 2016 and the Planning Regulation 2017, and the access rules made under the Planning Act 2016 and Planning Regulation 2017; or
![Page 8: Form 29—Compliance advice for building work · DA Form 2 – Building work details Approved form (version 1.1 effective 22 JUNE 2018) made under Section 282 of the Planning Act](https://reader036.vdocuments.net/reader036/viewer/2022071103/5fdc98ff695d9a388b254874/html5/thumbnails/8.jpg)
Page 6 DA Form 2 – Development Application details
Version 1.1— 22 JUNE 2018
required by other legislation (including the Right to Information Act 2009); or otherwise required by law. This information may be stored in relevant databases. The information collected will be retained as required by the Public Records Act 2002.
PART 7 –FOR COMPLETION BY THE ASSESSMENT MANAGER – FOR OFFICE USE ONLY
Date received: Reference numbers:
For completion by the building certifierClassification(s) of approved building work
Name QBCC Certification Licence number
QBCC Insurance receipt number
Notification of engagement of alternate chosen assessment managerPrescribed assessment managerName of chosen assessment managerDate chosen assessment manager engagedContact number of chosen assessment managerRelevant licence number(s) of chosen assessment manager
Additional information required by the local governmentConfirm proposed construction materials:
External walls Double brick Brick veneer Stone/concrete
Steel Timber Fibre cement
Curtain glass Aluminium Other
Frame Timber Other
Steel Aluminium
Floor Concrete Timber Other
Roof covering Slate/concrete Aluminium
Tiles Steel
Fibre cement Other
Additional building details required for the Australian Bureau of Statistics Existing building use/classification? (if applicable)
New building use/classification?Site area (m2) Floor area (m2)
![Page 9: Form 29—Compliance advice for building work · DA Form 2 – Building work details Approved form (version 1.1 effective 22 JUNE 2018) made under Section 282 of the Planning Act](https://reader036.vdocuments.net/reader036/viewer/2022071103/5fdc98ff695d9a388b254874/html5/thumbnails/9.jpg)
![Page 10: Form 29—Compliance advice for building work · DA Form 2 – Building work details Approved form (version 1.1 effective 22 JUNE 2018) made under Section 282 of the Planning Act](https://reader036.vdocuments.net/reader036/viewer/2022071103/5fdc98ff695d9a388b254874/html5/thumbnails/10.jpg)
![Page 11: Form 29—Compliance advice for building work · DA Form 2 – Building work details Approved form (version 1.1 effective 22 JUNE 2018) made under Section 282 of the Planning Act](https://reader036.vdocuments.net/reader036/viewer/2022071103/5fdc98ff695d9a388b254874/html5/thumbnails/11.jpg)
Department of Housing and Public Works
Form 15—Compliance certificate for building design or specification
NOTE: This is to be used for the purposes of section 10 of the Building Act 1975 and/or section 46 of the Building Regulation 2006. RESTRICTION: A building certifier (class B) can only give a compliance certificate about whether building work complies with the BCA or a provision of the Queensland Development Code (QDC). A building certifier (Class B) can not give a certificate regarding QDC boundary clearance and site cover provisions.
1. Property description This section need only be completed if details of street address and property description are applicable. E.g. in the case of (standard/generic) pool design/shell manufacture and/or patio and carport systems this section may not be applicable. The description must identify all land the subject of the application. The lot and plan details (e.g. SP/RP) are shown on title documents or a rates notice. If the plan is not registered by title, provide previous lot and plan details.
Street address (include no., street, suburb/locality and postcode) 78 Carrington St Kowanyama, Qld Postcode 4892
Lot and plan details (attach list if necessary) Lot 78 on SP212069
In which local government area is the land situated? Kowanyama Aboriginal Shire Council
2. Description of component/s certified
Clearly describe the extent of work covered by this certificate, e.g. all structural aspects of the steel roof beams.
Structural aspect of the Primary Structural Framing Elements: *Columns / Rafters / Purlins / Bracing *Concrete Footings and Slab to site specific Soil Classification Class 10a Steel Skillion Carport (56.000m long x 9.000m wide x ~4.962m at eaves level) Vu = 59.65 m/s
3. Basis of certification Detail the basis for giving the certificate and the extent to which tests, specifications, rules, standards, codes of practice and other publications, were relied upon.
AS/NZS 1170.0:2002 Structural Design Actions, Part 0: General principles AS/NZS 1170.1:2002 (Reconfirmed 2016) Structural Design Actions, Part 1: Permanent imposed and other actions AS/NZS1170.2:2011 Structural Design Actions, Part 2: Wind Actions AS/NZS 4600:2018 Cold-formed steel structures AS 4100-1998 (Reconfirmed 2016) Steel Structures AS 2870-2011 Residential slabs and footings AS 3566.1-2002 (Reconfirmed 2015) Self-drilling screws for the building and construction industries, Part 1: General requirements and mechanical properties ASI Wind Actions on Steel Sheds and Garages AS 3600:2018 Concrete Structures
4. Reference documentation Clearly identify any relevant documentation, e.g. numbered structural engineering plans.
“Clone KASC Workshop Parking Skillion” (all dated 13 / 07 / 2020) Elevations; Floor Plans; End Wall Girt Layout; Side Wall Girt Layout; Roof Purlin Plan; ISO Plan; Slab/Footing Plan; Post Details SKILCARPORT01 Issue “For Construction” (01.07.2017) (“Skillion Carports – Connection Details & Notes”) PREC-1010 Revision 0 (Standard Slabs & Foundations)
LOCAL GOVERNMENT USE ONLY Date received
Reference Number/s
Version 4 – July 2017
![Page 12: Form 29—Compliance advice for building work · DA Form 2 – Building work details Approved form (version 1.1 effective 22 JUNE 2018) made under Section 282 of the Planning Act](https://reader036.vdocuments.net/reader036/viewer/2022071103/5fdc98ff695d9a388b254874/html5/thumbnails/12.jpg)
5. Building certifier reference number
Building certifier reference number
6. Competent person details A competent person for building work, means a person who is assessed by the building certifier for the work as competent to practice in an aspect of the building and specification design, of the building work because of the individual’s skill, experience and qualifications in the aspect. The competent person must also be registered or licensed under a law applying in the State to practice the aspect.
If no relevant law requires the individual to be licensed or registered to be able to give the help, the certifier must assess the individual as having appropriate experience, qualifications or skills to be able to give the help.
If the chief executive issues any guidelines for assessing a competent person, the building certifier must use the guidelines when assessing the person.
Name (in full) Daniel James Cooper
Company name (if applicable) Contact person DJC Engineering Services Dan Cooper
Phone no. (business hours) Mobile no. Fax no. 0419 035 992
Email address [email protected]
Postal address PO Box 556 MC Toowoomba, Qld Postcode 4350
Licence or registration number (if applicable) RPEQ 9385
7. Signature of competent person
This certificate must be signed by the individual assessed by the building certifier as competent.
Signature Date 15 . 07 . 2020
The Building Act 1975 is administered by the Department of Housing and Public Works
![Page 13: Form 29—Compliance advice for building work · DA Form 2 – Building work details Approved form (version 1.1 effective 22 JUNE 2018) made under Section 282 of the Planning Act](https://reader036.vdocuments.net/reader036/viewer/2022071103/5fdc98ff695d9a388b254874/html5/thumbnails/13.jpg)
Department of Housing and Public Works
Form 15—Compliance certificate for building design or specification
NOTE: This is to be used for the purposes of section 10 of the Building Act 1975 and/or section 46 of the Building Regulation 2006. RESTRICTION: A building certifier (class B) can only give a compliance certificate about whether building work complies with the BCA or a provision of the Queensland Development Code (QDC). A building certifier (Class B) can not give a certificate regarding QDC boundary clearance and site cover provisions.
1. Property description
This section need only be completed if details of street address and property description are applicable.
E.g. in the case of (standard/generic) pool design/shell manufacture and/or patio and carport systems this section may not be applicable.
The description must identify all land the subject of the application.
The lot and plan details (e.g. SP/RP) are shown on title documents or a rates notice.
If the plan is not registered by title, provide previous lot and plan details.
Street address (include no., street, suburb/locality and postcode)
KOWANYAMA QLD
Postcode: 4871
Lot and plan details (attach list if necessary)
In which local government area is the land situated?
KOWANYAMA ABORIGINAL SHIRE COUNCIL
2. Description of component/s certified
Clearly describe the extent of work covered by this certificate, e.g. all structural aspects of the steel roof beams.
Building numbered 4060077-L01 Structural aspects of a 6 metre by 3 metre transportable amenities/office block.
3. Basis of certification Detail the basis for giving the certificate and the extent to which tests, specifications, rules,
standards, codes of practice and other publications, were relied upon.
AS1170 Parts 1 and 2, (suitable for a site with design wind speeds and pressures equivalent to a site classified as C3 (Ausco Standard C235)), AS1170 Part 4, AS 1684-3, AS 1720, AS 4100, AS 4600 Certification valid when building constructed from materials complying with the NCC and all relevant Australian Standards, all fixings meet relevant Australian Standards and whilst building is maintained in as new structural condition.
4. Reference documentation Clearly identify any relevant documentation, e.g. numbered structural engineering plans.
Drawings by Ausco Modular numbered SB40849 Sheets A100 – A600 (inclusive) and S-01 – S-03 (inclusive)
Ausco Modular Design and Engineering Standards, Ausco NATA Registered Laboratory Test Results as certified by Ausco’s registered engineer
LOCAL GOVERNMENT USE ONLY
Date received
Reference
Version 4 – July 2017
![Page 14: Form 29—Compliance advice for building work · DA Form 2 – Building work details Approved form (version 1.1 effective 22 JUNE 2018) made under Section 282 of the Planning Act](https://reader036.vdocuments.net/reader036/viewer/2022071103/5fdc98ff695d9a388b254874/html5/thumbnails/14.jpg)
5. Building certifier reference number
Building certifier reference number
6. Competent person details A competent person for building work, means a person who is assessed by the building certifier for the work as competent to practice in an aspect of the building and specification design, of the building work because of the individual’s skill, experience and qualifications in the aspect. The competent person must also be registered or licensed under a law applying in the State to practice the aspect.
If no relevant law requires the individual to be licensed or registered to be able to give the help, the certifier must assess the individual as having appropriate experience, qualifications or skills to be able to give the help.
If the chief executive issues any guidelines for assessing a competent person, the building certifier must use the guidelines when assessing the person.
Name (in full)
TIMOTHY MICHAEL PETERS
Company name if applicable Contact person
CRICHTON EDGE CONSULTING ENGINEERS TIM PETERS
Phone no. (business hours) Mobile no. Fax no.
(07) 3203 8699
Email address
Postal address
5/91 Landsborough Ave
Scarborough Qld Postcode 4020
Licence class Licence number
RPEQ 5496
Date approval to inspect received from building certifier
7. Signature of competent person
This certificate must be signed by the individual assessed by the building certifier as competent.
Signature Date
8 July 2020
The Building Act 1975 is administered by the Department of Housing and Public Works
![Page 15: Form 29—Compliance advice for building work · DA Form 2 – Building work details Approved form (version 1.1 effective 22 JUNE 2018) made under Section 282 of the Planning Act](https://reader036.vdocuments.net/reader036/viewer/2022071103/5fdc98ff695d9a388b254874/html5/thumbnails/15.jpg)
Department of Housing and Public Works
Form 15—Compliance certificate for building design or specification
NOTE: This is to be used for the purposes of section 10 of the Building Act 1975 and/or section 46 of the Building Regulation 2006. RESTRICTION: A building certifier (class B) can only give a compliance certificate about whether building work complies with the BCA or a provision of the Queensland Development Code (QDC). A building certifier (Class B) can not give a certificate regarding QDC boundary clearance and site cover provisions.
1. Property description This section need only be completed if details of street address and property description are applicable. E.g. in the case of (standard/generic) pool design/shell manufacture and/or patio and carport systems this section may not be applicable. The description must identify all land the subject of the application. The lot and plan details (e.g. SP/RP) are shown on title documents or a rates notice. If the plan is not registered by title, provide previous lot and plan details.
Street address (include no., street, suburb/locality and postcode) 78 Carrington St Kowanyama, Qld Postcode 4892
Lot and plan details (attach list if necessary) Lot 78 on SP272069
In which local government area is the land situated? Kowanyama Aboriginal Shire Council
2. Description of component/s certified
Clearly describe the extent of work covered by this certificate, e.g. all structural aspects of the steel roof beams.
Structural aspect of the Primary Structural Framing Elements: *Columns / Rafters / Purlins / Bracing *Concrete Footings and Slab to site specific Soil Classification Class 10a Steel Framed Portal Shed (31.846m long x 9.814m wide x ~4.202m high at eaves level) Vu = 59.65 m/s Note:- Fly-bracing to be at first purlin/batten from knee and ridge and every 2nd in between.
3. Basis of certification Detail the basis for giving the certificate and the extent to which tests, specifications, rules, standards, codes of practice and other publications, were relied upon.
AS/NZS 1170.0:2002 Structural Design Actions, Part 0: General principles AS/NZS 1170.1:2002 (Reconfirmed 2016) Structural Design Actions, Part 1: Permanent imposed and other actions AS/NZS1170.2:2011 Structural Design Actions, Part 2: Wind Actions AS/NZS 4600:2018 Cold-formed steel structures AS 4100-1998 (Reconfirmed 2016) Steel Structures AS 2870-2011 Residential slabs and footings AS 3566.1-2002 (Reconfirmed 2015) Self-drilling screws for the building and construction industries, Part 1: General requirements and mechanical properties ASI Wind Actions on Steel Sheds and Garages AS 3600:2018 Concrete Structures
Version 4 – July 2017
![Page 16: Form 29—Compliance advice for building work · DA Form 2 – Building work details Approved form (version 1.1 effective 22 JUNE 2018) made under Section 282 of the Planning Act](https://reader036.vdocuments.net/reader036/viewer/2022071103/5fdc98ff695d9a388b254874/html5/thumbnails/16.jpg)
4. Reference documentation Clearly identify any relevant documentation, e.g. numbered structural engineering plans.
“Roadworks Shed” (all dated 13 / 07 / 2020) Elevations; Floor Plans; Side Wall Girt Layout; End Wall Girt Layout; Roof Purlin Plan; ISO Plan; Slab/Footing Plan; Post Details GABLEPORT08 Issue “For Construction” (01.07.2017) (“Gable Frame Portal Sheds – 12.0m Wide Building 4.5m & 6.0m Bays”) GABLEPORT01 Issue “For Construction” (01.07.2017) (“Gable Frame Portal Sheds – Connection Details & Notes”) GABLEPORT02 Issue “For Construction” (01.07.2017) (“Gable Frame Portal Sheds – Connection Details & Notes”) GABLEPORT03 Issue “For Construction” (01.07.2017) (“Gable Frame Portal Sheds – Opening Details & Notes”) PREC-1010 Revision 0 (Standard Slabs & Foundations)
LOCAL GOVERNMENT USE ONLY Date received
Reference Number/s
![Page 17: Form 29—Compliance advice for building work · DA Form 2 – Building work details Approved form (version 1.1 effective 22 JUNE 2018) made under Section 282 of the Planning Act](https://reader036.vdocuments.net/reader036/viewer/2022071103/5fdc98ff695d9a388b254874/html5/thumbnails/17.jpg)
5. Building certifier reference number
Building certifier reference number
6. Competent person details A competent person for building work, means a person who is assessed by the building certifier for the work as competent to practice in an aspect of the building and specification design, of the building work because of the individual’s skill, experience and qualifications in the aspect. The competent person must also be registered or licensed under a law applying in the State to practice the aspect.
If no relevant law requires the individual to be licensed or registered to be able to give the help, the certifier must assess the individual as having appropriate experience, qualifications or skills to be able to give the help.
If the chief executive issues any guidelines for assessing a competent person, the building certifier must use the guidelines when assessing the person.
Name (in full) Daniel James Cooper
Company name (if applicable) Contact person DJC Engineering Services Dan Cooper
Phone no. (business hours) Mobile no. Fax no. 0419 035 992
Email address [email protected]
Postal address PO Box 556 MC Toowoomba, Qld Postcode 4350
Licence or registration number (if applicable) RPEQ 9385
7. Signature of competent person
This certificate must be signed by the individual assessed by the building certifier as competent.
Signature Date 15 . 07 . 2020
The Building Act 1975 is administered by the Department of Housing and Public Works
![Page 18: Form 29—Compliance advice for building work · DA Form 2 – Building work details Approved form (version 1.1 effective 22 JUNE 2018) made under Section 282 of the Planning Act](https://reader036.vdocuments.net/reader036/viewer/2022071103/5fdc98ff695d9a388b254874/html5/thumbnails/18.jpg)
2970-E-FM15 Kowanyama Workshop Compound
Department of Housing and Public Works
Form 15—Compliance certificate for building design or specification
NOTE: This is to be used for the purposes of section 10 of the Building Act 1975 and/or section 46 of the Building Regulation 2006. RESTRICTION: A building certifier (class B) can only give a compliance certificate about whether building work complies with the BCA or a provision of the Queensland Development Code (QDC). A building certifier (Class B) can not give a certificate regarding QDC boundary clearance and site cover provisions.
1. Property description
This section need only be completed if details of street address and property description are applicable.
E.g. in the case of (standard/generic) pool design/shell manufacture and/or patio and carport systems this section may not be applicable.
The description must identify all land the subject of the application.
The lot and plan details (e.g. SP/RP) are shown on title documents or a rates notice.
If the plan is not registered by title, provide previous lot and plan details.
Street address (include no., street, suburb/locality and postcode)
Chapman Road, Kowanyama
Queensland Postcode 4892
Lot and plan details (attach list if necessary)
Lot 78 on SP272069
In which local government area is the land situated?
Kowanyama Aboriginal Shire Council
2. Description of component/s certified
Clearly describe the extent of work covered by this certificate, e.g. all structural aspects of the steel roof beams.
This certificate covers the certification of the new areas as noted on the referenced documentation only and is based on the surrounding areas being fully compliant.
Emergency Escape Lighting and Exit Signage
Energy Efficiency
Safe Movement
3. Basis of certification Detail the basis for giving the certificate and the extent to which tests, specifications, rules,
standards, codes of practice and other publications, were relied upon.
AS2293.1-2018 Emergency Escape Lighting and Exit for Buildings
AS1680.1 Lighting for safe movement
NCC 2019 Section J (Part J6) Energy Efficiency
Version 4 – July 2017
![Page 19: Form 29—Compliance advice for building work · DA Form 2 – Building work details Approved form (version 1.1 effective 22 JUNE 2018) made under Section 282 of the Planning Act](https://reader036.vdocuments.net/reader036/viewer/2022071103/5fdc98ff695d9a388b254874/html5/thumbnails/19.jpg)
2970-E-FM15 Kowanyama Workshop Compound
4. Reference documentation Clearly identify any relevant documentation, e.g. numbered structural engineering plans.
2970-E01 (3) Workshop Compound – Electrical Services
5. Building certifier reference number
Building certifier reference number
6. Competent person details
A competent person for building work, means a person who is assessed by the building certifier for the work as competent to practice in an aspect of the building and specification design, of the building work because of the individual’s skill, experience and qualifications in the aspect. The competent person must also be registered or licensed under a law applying in the State to practice the aspect.
If no relevant law requires the individual to be licensed or registered to be able to give the help, the certifier must assess the individual as having appropriate experience, qualifications or skills to be able to give the help.
If the chief executive issues any guidelines for assessing a competent person, the building certifier must use the guidelines when assessing the person.
Name (in full)
Joe Catalano
Company name (if applicable) Contact person
SEQUAL Consulting Group Pty Ltd Joe Catalano
Phone no. (business hours) Mobile no. Fax no.
1300 Ask Sequal
Email address
Postal address
PO Box 797N
NORTH CAIRNS Postcode 4870
Licence or registration number (if applicable)
RPEQ No. 05934
7. Signature of competent person
This certificate must be signed by the individual assessed by the building certifier as competent.
Signature Date
LOCAL GOVERNMENT USE ONLY
Date received
Reference Number/s
The Building Act 1975 is administered by the Department of Housing and Public Works
![Page 20: Form 29—Compliance advice for building work · DA Form 2 – Building work details Approved form (version 1.1 effective 22 JUNE 2018) made under Section 282 of the Planning Act](https://reader036.vdocuments.net/reader036/viewer/2022071103/5fdc98ff695d9a388b254874/html5/thumbnails/20.jpg)
Department of Housing and Public Works
Form 15—Compliance certificate for building design or specification
NOTE: This is to be used for the purposes of section 10 of the Building Act 1975 and/or section 46 of the Building Regulation 2006. RESTRICTION: A building certifier (class B) can only give a compliance certificate about whether building work complies with the BCA or a provision of the Queensland Development Code (QDC). A building certifier (Class B) can not give a certificate regarding QDC boundary clearance and site cover provisions.
1. Property description This section need only be completed if details of street address and property description are applicable. E.g. in the case of (standard/generic) pool design/shell manufacture and/or patio and carport systems this section may not be applicable. The description must identify all land the subject of the application. The lot and plan details (e.g. SP/RP) are shown on title documents or a rates notice. If the plan is not registered by title, provide previous lot and plan details.
Street address (include no., street, suburb/locality and postcode) 78 Carrington St Kowanyama, Qld Postcode 4892
Lot and plan details (attach list if necessary) Lot 78 on SP212069
In which local government area is the land situated? Kowanyama Aboriginal Shire Council
2. Description of component/s certified
Clearly describe the extent of work covered by this certificate, e.g. all structural aspects of the steel roof beams.
Structural aspect of the Primary Structural Framing Elements: *Columns / Rafters / Purlins / Bracing *Concrete Footings and Slab to site specific Soil Classification Class 10a Steel Skillion Carport (23.464m long x 5.200m wide x ~4.528m at eaves level) Vu = 59.65 m/s
3. Basis of certification Detail the basis for giving the certificate and the extent to which tests, specifications, rules, standards, codes of practice and other publications, were relied upon.
AS/NZS 1170.0:2002 Structural Design Actions, Part 0: General principles AS/NZS 1170.1:2002 (Reconfirmed 2016) Structural Design Actions, Part 1: Permanent imposed and other actions AS/NZS1170.2:2011 Structural Design Actions, Part 2: Wind Actions AS/NZS 4600:2018 Cold-formed steel structures AS 4100-1998 (Reconfirmed 2016) Steel Structures AS 2870-2011 Residential slabs and footings AS 3566.1-2002 (Reconfirmed 2015) Self-drilling screws for the building and construction industries, Part 1: General requirements and mechanical properties ASI Wind Actions on Steel Sheds and Garages AS 3600:2018 Concrete Structures
4. Reference documentation Clearly identify any relevant documentation, e.g. numbered structural engineering plans.
“KASC Carpenter Awning” (all dated 13 / 07 / 2020) Elevations; Floor Plans; End Wall Girt Layout; Side Wall Girt Layout; Roof Purlin Plan; ISO Plan; Slab/Footing Plan; Post Details SKILCARPORT01 Issue “For Construction” (01.07.2017) (“Skillion Carports – Connection Details & Notes”) PREC-1010 Revision 0 (Standard Slabs & Foundations)
LOCAL GOVERNMENT USE ONLY Date received
Reference Number/s
Version 4 – July 2017
![Page 21: Form 29—Compliance advice for building work · DA Form 2 – Building work details Approved form (version 1.1 effective 22 JUNE 2018) made under Section 282 of the Planning Act](https://reader036.vdocuments.net/reader036/viewer/2022071103/5fdc98ff695d9a388b254874/html5/thumbnails/21.jpg)
5. Building certifier reference number
Building certifier reference number
6. Competent person details A competent person for building work, means a person who is assessed by the building certifier for the work as competent to practice in an aspect of the building and specification design, of the building work because of the individual’s skill, experience and qualifications in the aspect. The competent person must also be registered or licensed under a law applying in the State to practice the aspect.
If no relevant law requires the individual to be licensed or registered to be able to give the help, the certifier must assess the individual as having appropriate experience, qualifications or skills to be able to give the help.
If the chief executive issues any guidelines for assessing a competent person, the building certifier must use the guidelines when assessing the person.
Name (in full) Daniel James Cooper
Company name (if applicable) Contact person DJC Engineering Services Dan Cooper
Phone no. (business hours) Mobile no. Fax no. 0419 035 992
Email address [email protected]
Postal address PO Box 556 MC Toowoomba, Qld Postcode 4350
Licence or registration number (if applicable) RPEQ 9385
7. Signature of competent person
This certificate must be signed by the individual assessed by the building certifier as competent.
Signature Date 15 . 07 . 2020
The Building Act 1975 is administered by the Department of Housing and Public Works