Form Release Agents

ChembetonUse On: Handset Forms; B-B Plywood; Steel Forms; Aluminum Forms

■■ Economical, general purpose.

■■ Petroleum based formulation.

■■ Dries fast and resists removal from rain showers and foot traffic.

(800) 669-2738

Nox-Crete PCEUse On: HDO, PSF & CBF Overlaid Plywood Forms; Steel Forms; Plastic & Rubber Form Liners; Fiberglass Forms

■■ 100% biodegradable.

■■ Water based formulation.

■■ Produces smooth, uniformly white architectural concrete surfaces with no staining and substantially fewer surface defects.

■■ Dries to form a non-slippery film which is ideal for raised horizontal decks.

■■ Resists removal by heavy rain, foot traffic, running water and scouring during concrete placement common with vertical pours.

■■ Maximum performance with low slump, high density, pozzolan-containing or superplasticized concrete mix designs.

■■ Reduces binding.

®

®Nox-Crete Form CoatingUse On: Handset Forms, B-B Plywood; Overlaid Plywood Forms; Steel Forms; Plastic Form Liners

■■ Exceptional performance on non- overlaid plywood, dimensional lumber and MDO plywood.

■■ Available in petroleum based, water based and biodegradable formulations.

■■ Extends the life of wood forms by reducing the absorption of destructive alkaline bleed water.

■■ Produces smooth, uniformly white concrete surfaces with no staining and reduced surface voids (bugholes).

®

This Symbol Indicates Products Available In A Version For Building Green, Respecting The Environment And Protecting People.

This Symbol Indicates Products Available In A 100% Biodegradable Version.

SELECTION GUIDE FORM PERFORMANCE LEVEL SUBSTRATE MAXIMUM STANDARD

Aluminum Alumi-Nox Alumi-Con Chembeton Pro-Release MDO/B-B Plywood Nox-Crete Form Coating Chembeton Pro-Release Utility Release

Overlaid Plywood Bio-Nox Chembeton Faced Handset Forms Nox-Crete Form Coating Pro-Release Utility Release HDO, PSF & CBF Bio-Nox Chembeton Overlaid Plywood Nox-Crete Form Coating Pro-Release Nox-Crete PCE Release Agent #10

Steel Bio-Nox Chembeton Nox-Crete Form Coating Pro-Release Nox-Crete PCE Release Agent #10

Plastic/Fiberglass Bio-NoxForms & Form Liners Nox-Crete Form Coating Nox-Crete PCE Release Agent #10

Rubber Form Liners Bio-Nox Nox-Crete Form Coating E Nox-Crete PCE

Precast Bio-Nox Pallet-Nox Precast Release #80 Release Agent #10 IP

Not Sure Which Release Agent Is Right For Your

Application?

Our Knowledgeable Technical Support Staff

Can Help!

(800) 669-2738

Product Data Sheets & MSDS Available Online

www.nox-crete.com

Alumi-ConUse On: Aluminum Forms

■■ Super concentrated for maximum economy.

■■ Variable dilution rate to meet specific performance needs.

■■ Dries fast. Non-slippery.

■■ Resists removal by normal rain showers.

■■ Non-staining, low odor.

■■ Stays mixed longer due to improved emulsion technology.

■■ Won’t freeze prior to dilution with water.

■■ Dilutes and mixes easily with water using Nox-Crete’s drum-mounted Mix Station - requires no measuring.

®

Alumi-NoxUse On: Aluminum Forms

■■ Maximum performance for improved concrete appearance with reduced spalling, bugholes and surface voids and with no staining.

■■ Available in petroleum and water based formulations.

■■ Performs well with concrete mix designs utilizing chemical and mineral admixtures, such as fly ash and blast furnace slag.

■■ Low viscosity petroleum based version is easily sprayable at temperatures below freezing.

®

24-Hour Access To The Information You Need

Bio-NoxUse On: Handset Forms; Overlaid Plywood Forms; Steel Forms; Plastic & Rubber Form Liners

■■ 100% biodegradable.

■■ Water based formulation.

■■ Produces smooth, uniformly white architectural concrete surfaces with no staining and substantially fewer surface defects.

■■ Can be used with aggressive stripping schedules where forms are stripped and repoured within 24 hours.

■■ Does not oxidize or turn tacky.

®

Consult current product data sheet before final selection and application of any Nox-Crete form release agent.

Power Sprayer

Release Agent #10Use On: HDO, PSF & CBF Overlaid Plywood Forms; Steel Forms; Plastic & Fiberglass Forms

■■ Produces smooth, uniformly white architectural concrete surfaces with no staining and substantially fewer surface defects.

■■ Available in petroleum based and water based formulations.

■■ Ideal for forms which see daily use or aggressive stripping schedules.

■■ Dries fast. Non-slippery.

APPLICATION EQUIPMENT

www.nox-crete.com

Pallet-NoxUse On: Precast Pipe Header Rings; Overlaid Plywood, Steel & Aluminum Paver Pallets

■■ 100% biodegradable.

■■ Water based formulation.

■■ Ideal for dry cast concrete production.

■■ Combines chemical reactivity and physical barrier type release properties.

■■ Ideal for dip tank applications.

■■ Variable dilution rate to meet specific performance needs.

■■ Pallet and header rings remove easily, minimizing concrete damage and related patching and repair.

■■ Produces smooth, uniformly white concrete surfaces with no staining and substantially fewer surface voids (bugholes).

®

Precast Release #80Use On: HDO, PSF & CBF Overlaid Plywood Forms; Steel Forms; Plastic & Fiberglass Forms In Precast Applications

■■ Combines chemical reactivity and physical barrier type release properties.

■■ Available in petroleum and water based formulations.

■■ Ideal for steam-cured precast concrete and precast mix designs using high amounts of cement, fly ash, silica fume or high-range water reducers.

■■ Produces smooth, uniformly white architectural concrete surfaces with no staining and substantially fewer surface defects.

®

Pro-ReleaseUse On: Handset Forms; B-B Plywood; Steel Forms; Aluminum Forms

■■ Available in ready-to-use and concentrated formulation.

■■ Economical and water based.

■■ Specially designed for sticky concrete mix designs, such as those containing pozzolans.

■■ Dries fast. Non-slippery.

■■ Available with Winter Guard™ additive for cold weather application and storage. Winter Guard™ prevents freezing and protects the product from freeze damage.

■■ Resists removal by normal rain showers.

■■ Non-staining, pleasant odor.

■■ Concentrated version dilutes and mixes easily with water using Nox-Crete’s drum-mounted Mix Station - requires no measuring.

®

Utility ReleaseUse On: Handset Forms; B-B Plywood

■■ Super concentrated for maximum economy.

■■ Variable dilution rate to meet specific performance needs.

■■ Dries fast. Non-slippery.

■■ Resists removal by normal rain showers.

■■ Non-staining, low odor.

■■ Stays mixed longer due to improved emulsion technology.

■■ Won’t freeze prior to dilution with water.

■■ Dilutes and mixes easily with water using Nox-Crete’s drum-mounted Mix Station - requires no measuring.

®

®

Perfect Form & Concrete Sprayer

Ideal Form & Concrete Sprayer

Hand Pump Sprayers

Parts & Service For All Application Equipment Available Directly From Nox-Crete

Mix StationMixes and dilutes Nox-Crete’s super concentrated

form release agents in one easy step!

Nox-Crete developed the world’s first chemically active

form release agent in 1956.

• Nox-Crete form release agents are non-staining and leave no residue

• Nox-Crete form release agents extend wood form panel life - up to double the number of pours

• Your overlaid plywood forms were probably produced by a mill using and recommending Nox-Crete form release agents for longer life of their form panels

• The crisp, positive release of Nox-Crete form release agents eliminates form damage during stripping

• Nox-Crete form release agents produce uniformly colored concrete surfaces with minimal surface voids

-

01/2012

Nox-Crete Products Group1444 S 20th Street Omaha, NE 68108 USA

Phone (800) 669-2738 (402) 341-1976www.nox-crete.com