fqp5n60c / fqpf5n60c - farnell · 2016. 5. 10. · package marking and ordering information ©2003...
TRANSCRIPT
December 2013
Thermal Characteristics
FQP5N60C / FQPF5N60CN-Channel QFET® MOSFET600 V, 4.5 A, 2.5 Ω
Description
©2003 Fairchild Semiconductor Corporation FQP5N60C / FQPF5N60C Rev. C1
www.fairchildsemi.com1
FQP5N
60C / FQ
PF5N60C
— N
-Channel Q
FET® M
OSFET
This N-Channel enhancement mode power MOSFET is produced using Fairchild Semiconductor’s proprietary planar stripe and DMOS technology. This advanced MOSFET technology has been especially tailored to reduce on-state resistance, and to provide superior switching performance and high avalanche energy strength. These devices are suitable for switched mode power supplies, active power factor correction (PFC), and electronic lamp ballasts.
Features• 4.5 A, 600 V, RDS(on) = 2.5 Ω (Max.) @ VGS = 10 V,
ID = 2.25 A
• Low Gate Charge (Typ. 15 nC)
• Low Crss (Typ. 6.5 pF)
• 100% Avalanche Tested
Absolute Maximum Ratings TC = 25°C unless otherwise noted.
Symbol Parameter FQP5N60C FQPF5N60C UnitRθJC Thermal Resistance, Junction-to-Case, Max. 1.25 3.79 °C/WRθCS Thermal Resistance, Case-to-Sink Typ, Max. 0.5 -- °C/WRθJA Thermal Resistance, Junction-to-Ambient, Max. 62.5 62.5 °C/W
TO-220GDS TO-220F
GDS
G
S
D
* Drain current limited by maximum junction temperature.
Symbol Parameter FQP5N60C FQPF5N60C UnitVDSS Drain-Source Voltage 600 VID Drain Current - Continuous (TC = 25°C) 4.5 4.5 * A
- Continuous (TC = 100°C) 2.6 2.6 * AIDM Drain Current - Pulsed (Note 1) 18 18 * AVGSS Gate-Source Voltage ± 30 VEAS Single Pulsed Avalanche Energy (Note 2) 210 mJIAR Avalanche Current (Note 1) 4.5 AEAR Repetitive Avalanche Energy (Note 1) 10 mJdv/dt Peak Diode Recovery dv/dt (Note 3) 4.5 V/nsPD Power Dissipation (TC = 25°C) 100 33 W
- Derate above 25°C 0.8 0.26 W/°CTJ, TSTG Operating and Storage Temperature Range -55 to +150 °C
TLMaximum Lead Temperature for Soldering, 1/8" from Case for 5 Seconds
300 °C
Package Marking and Ordering Information
©2003 Fairchild Semiconductor Corporation FQP5N60C / FQPF5N60C Rev. C1
www.fairchildsemi.com2
FQP5N
60C / FQ
PF5N60C
— N
-Channel Q
FET® M
OSFET
Electrical Characteristics TC = 25°C unless otherwise noted.
Part Number Top Mark Package Reel Size Tape Width QuantityFQP5N60CFQP5N60C TO-220 N/A N/A 50 units
Packing MethodTube
TO-220F Tube N/A N/A 50 unitsFQPF5N60CFQPF5N60C
Notes:1. Repetitive rating : pulse-width limited by maximum junction temperature.2. L = 18.9 mH, IAS = 4.5 A, VDD = 50 V, RG = 25 Ω, starting TJ = 25°C.3. ISD ≤ 4.5 A, di/dt ≤ 200 A/µs , VDD ≤ BVDSS, starting TJ = 25°C.4. Essentially independent of operating temperature.
Symbol Parameter Test Conditions Min. Typ. Max. Unit
Off CharacteristicsBVDSS Drain-Source Breakdown Voltage VGS = 0 V, ID = 250 µA 600 -- -- V∆BVDSS / ∆TJ
Breakdown Voltage Temperature Coefficient
ID = 250 µA, Referenced to 25°C -- 0.6 -- V/°C
IDSS Zero Gate Voltage Drain CurrentVDS = 600 V, VGS = 0 V -- -- 1 µAVDS = 480 V, TC = 125°C -- -- 10 µA
IGSSF Gate-Body Leakage Current, Forward VGS = 30 V, VDS = 0 V -- -- 100 nAIGSSR Gate-Body Leakage Current, Reverse VGS = -30 V, VDS = 0 V -- -- -100 nA
On Characteristics VGS(th) Gate Threshold Voltage VDS = VGS, ID = 250 µA 2.0 -- 4.0 VRDS(on) Static Drain-Source
On-ResistanceVGS = 10 V, ID = 2.25 A -- 2.0 2.5 Ω
gFS Forward Transconductance VDS = 40 V, ID = 2.25 A -- 4.7 -- S
Dynamic CharacteristicsCiss Input Capacitance VDS = 25 V, VGS = 0 V,
f = 1.0 MHz
-- 515 670 pFCoss Output Capacitance -- 55 72 pFCrss Reverse Transfer Capacitance -- 6.5 8.5 pF
Switching Characteristics td(on) Turn-On Delay Time VDD = 300 V, ID = 4.5
A, RG = 25 Ω
(Note 4)
-- 10 30 nstr Turn-On Rise Time -- 42 90 nstd(off) Turn-Off Delay Time -- 38 85 nstf Turn-Off Fall Time -- 46 100 nsQg Total Gate Charge VDS = 480 V, ID = 4.5 A,
VGS = 10 V (Note 4)
-- 15 19 nCQgs Gate-Source Charge -- 2.5 -- nCQgd Gate-Drain Charge -- 6.6 -- nC
Drain-Source Diode Characteristics and Maximum RatingsIS Maximum Continuous Drain-Source Diode Forward Current -- -- 4.5 AISM Maximum Pulsed Drain-Source Diode Forward Current -- -- 18 AVSD Drain-Source Diode Forward Voltage VGS = 0 V, IS = 4.5 A -- -- 1.4 Vtrr Reverse Recovery Time VGS = 0 V, IS = 4.5 A,
dIF / dt = 100 A/µs -- 300 -- ns
Qrr Reverse Recovery Charge -- 2.2 -- µC
©2003 Fairchild Semiconductor Corporation FQP5N60C / FQPF5N60C Rev. C1
www.fairchildsemi.com3
FQP5N
60C / FQ
PF5N60C
— N
-Channel Q
FET® M
OSFET
!
0.2 0.4 0.6 0.8 1.0 1.2 1.410-1
100
101
150
※ Notes :1. VGS = 0V2. 250μs Pulse Test
25I DR, R
ever
se D
rain
Cur
rent
[A]
VSD, Source-Drain voltage [V]
0 4 12 160
2
4
6
8
10
12
VDS = 300V
VDS = 120V
VDS = 480V
※ Note : ID = 4.5A
V GS, G
ate-
Sour
ce V
olta
ge [V
]
8
QG, Total Gate Charge [nC]
0 2 4 86 100
1
2
3
4
5
6
VGS = 20V
VGS = 10V
※ Note : TJ = 25
RDS
(ON)
[Ω],
Drai
n-So
urce
On-
Resis
tanc
e
ID, Drain Current [A]
Figure 5. Capacitance Characteristics Figure 6. Gate Charge Characteristics
Figure 3. On-Resistance Variation vsDrain Current and Gate Voltage
Figure 4. Body Diode Forward Voltage Variation with Source Current
and Temperature
Figure 2. Transfer CharacteristicsFigure 1. On-Region Characteristics
10-1 0 1010
200
400
600
800
1000Ciss = Cgs + Cgd (Cds = shorted)Coss = Cds + Cgd
Crss = Cgd
※ Notes ; 1. VGS = 0 V 2. f = 1 MHz
Crss
Coss
Ciss
Capa
citan
ce [p
F]
10
VDS, Drain-Source Voltage [V]
10-1 0 10110-2
10-1
100
101 VGS
Top : 15.0 V 10.0 V
8.0 V 7.0 V 6.5 V 6.0 V 5.5 V 5.0 V
Bottom : 4.5 V
※ Notes :1. 250μ s Pulse Test2. TC = 25
I D, D
rain
Cur
rent
[A]
10
VDS, Drain-Source Voltage [V]
842 1010-1
100
101
150oC
25oC
-55oC
※ Notes : 1. VDS = 40V2. 250μ s Pulse Test
I D, D
rain
Cur
rent
[A]
6
VGS, Gate-Source Voltage [V]
©2003 Fairchild Semiconductor Corporation FQP5N60C / FQPF5N60C Rev. C1
www.fairchildsemi.com4
FQP5N
60C / FQ
PF5N60C
— N
-Channel Q
FET® M
OSFET
Typical Characteristics (Continued)
100 101 102 10310-2
10-1
100
101
100 ms
10 µs
DC
10 ms
1 ms
100 µs
Operation in This Area is Limited by R DS(on)
※ Notes :
1. TC = 25 oC
2. TJ = 150 oC3. Single Pulse
I D, D
rain
Curre
nt [A
]
VDS, Drain-Source Voltage [V]
100 101 102 10310-2
10-1
100
101
100 msDC
10 ms
1 ms
100 µs
Operation in This Area is Limited by R DS(on)
※ Notes :
1. TC = 25 oC
2. TJ = 150 oC3. Single Pulse
I D, D
rain
Curre
nt [A
]
VDS, Drain-Source Voltage [V]
Figure 9-1. Maximum Safe Operating Areafor FQP5N60C
Figure 10. Maximum Drain Currentvs Case Temperature
Figure 7. Breakdown Voltage Variationvs Temperature
Figure 8. On-Resistance Variationvs Temperature
Figure 9-2. Maximum Safe Operating Areafor FQPF5N60C
25 50 75 100 125 1500
1
2
3
4
5
I D, D
rain
Cur
rent
[A]
TC, Case Temperature []
-100 -50 0 50 100 150 2000.8
0.9
1.0
1.1
1.2
※ Notes : 1. VGS = 0 V 2. ID = 250 μA
BVDS
S, (
Norm
alize
d)Dr
ain-S
ourc
e Br
eakd
own
Volta
ge
TJ, Junction Temperature [oC]
-100 -50 0 50 100 150 2000.0
0.5
1.0
1.5
2.0
2.5
3.0
※ Notes : 1. VGS = 10 V 2. ID = 2.25 A
RDS
(ON)
, (No
rmali
zed)
Drain
-Sou
rce
On-
Resis
tanc
e
TJ, Junction Temperature [oC]
©2003 Fairchild Semiconductor Corporation FQP5N60C / FQPF5N60C Rev. C1
www.fairchildsemi.com5
FQP5N
60C / FQ
PF5N60C
— N
-Channel Q
FET® M
OSFET
Typical Characteristics (Continued)
1 0 -5 1 0 01 0 -4 1 0 -3 1 0 -2 1 0 -1 1 0 11 0 -2
1 0 -1
1 0 0
※ N o te s : 1 . Z
θ J C( t) = 3 .7 9 /W M a x . 2 . D u ty F a c to r , D = t1 / t 2
3 . T J M - T C = P D M * Zθ J C( t)
s in g le p u ls e
D = 0 .5
0 .0 2
0 .2
0 .0 5
0 .1
0 .0 1
1 0 -5 1 0 -4 1 0 0 1 0 1
1 0 -2
1 0 -1
1 0 0
※ N o te s : 1 . Z θ J C( t ) = 1 .2 5 /W M a x . 2 . D u ty F a c to r , D = t 1 / t 2
- 3 . T J M = T C P D M * Z θ J C( t )
s ein g le p u ls
D = 0 .5
0 .0 2
0 .2
0 .0 5
0 .1
0 .0 1
1 0 -3 1 0 -2 1 0 -1
t 1 , S q u a re W a v e P u ls e D u r a t io n [s e c ]
Figure 11-1. Transient Thermal Response Curve for FQP5N60C
t 1 , S q u a re W a v e P u ls e D u ra t io n [s e c ]
Figure 11-2. Transient Thermal Response Curve for FQPF5N60C
t1
PDM
t2
t1
PDM
t2Z JC
(t), T
herm
al R
espo
nse
[o C/W
]Z
JC(t)
, The
rmal
Res
pons
e [o C
/W]
Figure 12. Gate Charge Test Circuit & Waveform
Figure 13. Resistive Switching Test Circuit & Waveforms
Figure 14. Unclamped Inductive Switching Test Circuit & Waveforms
VGS
VDS
10%
90%
td(on) tr
t on t off
td(off) tf
VDD
10V
VDSRL
DUT
RG
VGS
VGS
VDS
10%
90%
td(on) tr
t on t off
td(off) tf
VDD
10V
VDSRL
DUT
RG
VGS
VGS
Charge
VGS
10VQg
Qgs Qgd
3mA
VGS
DUT
VDS
300nF
50KΩ
200nF12V
Same Typeas DUT
Charge
VGS
10VQg
Qgs Qgd
3mA
VGS
DUT
VDS
300nF
50KΩ
200nF12V
Same Typeas DUT
EAS = L IAS2----
21 --------------------
BVDSS - VDD
BVDSS
VDD
VDS
BVDSS
t p
VDD
IAS
VDS (t)
ID (t)
Time
10V DUT
RG
L
I D
t p
EAS = L IAS2----
21EAS = L IAS
2----21----21 --------------------
BVDSS - VDD
BVDSS
VDD
VDS
BVDSS
t p
VDD
IAS
VDS (t)
ID (t)
Time
10V DUT
RG
LL
I DI D
t p
VGSVGS
IG = const.
©2003 Fairchild Semiconductor Corporation FQP5N60C / FQPF5N60C Rev. C1
www.fairchildsemi.com6
FQP5N
60C / FQ
PF5N60C
— N
-Channel Q
FET® M
OSFET
Figure 15. Peak Diode Recovery dv/dt Test Circuit & Waveforms
DUT
VDS
+
_
DriverRG
Same Type as DUT
VGS • dv/dt controlled by RG
• ISD controlled by pulse period
VDD
LI SD
10VVGS
( Driver )
I SD
( DUT )
VDS
( DUT )
VDD
Body DiodeForward Voltage Drop
VSD
IFM , Body Diode Forward Current
Body Diode Reverse Current
IRM
Body Diode Recovery dv/dt
di/dt
D =Gate Pulse WidthGate Pulse Period
--------------------------
DUT
VDS
+
_
DriverRG
Same Type as DUT
VGS • dv/dt controlled by RG
• ISD controlled by pulse period
VDD
LLI SD
10VVGS
( Driver )
I SD
( DUT )
VDS
( DUT )
VDD
Body DiodeForward Voltage Drop
VSD
IFM , Body Diode Forward Current
Body Diode Reverse Current
IRM
Body Diode Recovery dv/dt
di/dt
D =Gate Pulse WidthGate Pulse Period
--------------------------D =Gate Pulse WidthGate Pulse Period
--------------------------
©2003 Fairchild Semiconductor Corporation FQP5N60C / FQPF5N60C Rev. C1
www.fairchildsemi.com7
FQP5N
60C / FQ
PF5N60C
— N
-Channel Q
FET® M
OSFET
www.fairchildsemi.com8
FQP5N
60C / FQ
PF5N60C
— N
-Channel Q
FET® M
OSFET
Mechanical Dimensions
©2003 Fairchild Semiconductor Corporation FQP5N60C / FQPF5N60C Rev. C1
Figure 16. TO-220, Molded, 3-Lead, Jedec Variation ABPackage drawings are provided as a service to customers considering Fairchild components. Drawings may change in any manner without notice. Please note the revision and/or date on the drawing and contact a Fairchild Semiconductor representative to verify or obtain the most recent revision. Package specifications do not expand the terms of Fairchild’s worldwide terms and conditions, specif-ically the warranty therein, which covers Fairchild products.
Always visit Fairchild Semiconductor’s online packaging area for the most recent package drawings:
http://www.fairchildsemi.com/package/packageDetails.html?id=PN_TT220-003
©2003 Fairchild Semiconductor Corporation FQP5N60C / FQPF5N60C Rev. C1
www.fairchildsemi.com9
FQP5N
60C / FQ
PF5N60C
— N
-Channel Q
FET® M
OSFET
Mechanical Dimensions
Figure 17. TO220, Molded, 3-Lead, Full Pack, EIAJ SC91, Straight LeadPackage drawings are provided as a service to customers considering Fairchild components. Drawings may change in any manner without notice. Please note the revision and/or date on the drawing and contact a Fairchild Semiconductor representative to verify or obtain the most recent revision. Package specifications do not expand the terms of Fairchild’s worldwide terms and conditions, specif-ically the warranty therein, which covers Fairchild products.
Always visit Fairchild Semiconductor’s online packaging area for the most recent package drawings:
http://www.fairchildsemi.com/package/packageDetails.html?id=PN_TF220-003
©2003 Fairchild Semiconductor Corporation FQP5N60C / FQPF5N60C Rev. C1
www.fairchildsemi.com10
TRADEMARKSThe following includes registered and unregistered trademarks and service marks, owned by Fairchild Semiconductor and/or its global subsidiaries, and is not intended to be an exhaustive list of all such trademarks.
*Trademarks of System General Corporation, used under license by Fairchild Semiconductor.
DISCLAIMERFAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION, OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS. THESE SPECIFICATIONS DO NOT EXPAND THE TERMS OF FAIRCHILD’S WORLDWIDE TERMS AND CONDITIONS, SPECIFICALLY THE WARRANTY THEREIN, WHICH COVERS THESE PRODUCTS.
LIFE SUPPORT POLICYFAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF FAIRCHILD SEMICONDUCTOR CORPORATION.As used here in:1. Life support devices or systems are devices or systems which, (a) are
intended for surgical implant into the body or (b) support or sustain life, and (c) whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in a significant injury of the user.
2. A critical component in any component of a life support, device, orsystem whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety oreffectiveness.
PRODUCT STATUS DEFINITIONSDefinition of Terms
AccuPower™AX-CAP®*BitSiC™Build it Now™CorePLUS™CorePOWER™CROSSVOLT™CTL™Current Transfer Logic™DEUXPEED®
Dual Cool™EcoSPARK®
EfficentMax™ESBC™
Fairchild®
Fairchild Semiconductor®FACT Quiet Series™FACT®
FAST®
FastvCore™FETBench™FPS™
F-PFS™FRFET®
Global Power ResourceSM
GreenBridge™Green FPS™Green FPS™ e-Series™Gmax™GTO™IntelliMAX™ISOPLANAR™Marking Small Speakers Sound Louder and Better™MegaBuck™MICROCOUPLER™MicroFET™MicroPak™MicroPak2™MillerDrive™MotionMax™mWSaver®OptoHiT™OPTOLOGIC®
OPTOPLANAR®
PowerTrench®
PowerXS™Programmable Active Droop™QFET®
QS™Quiet Series™RapidConfigure™
Saving our world, 1mW/W/kW at a time™SignalWise™SmartMax™SMART START™Solutions for Your Success™SPM®
STEALTH™SuperFET®
SuperSOT™-3SuperSOT™-6SuperSOT™-8SupreMOS®
SyncFET™
Sync-Lock™®*
TinyBoost®TinyBuck®
TinyCalc™TinyLogic®
TINYOPTO™TinyPower™TinyPWM™TinyWire™TranSiC™TriFault Detect™TRUECURRENT®*SerDes™
UHC®
Ultra FRFET™UniFET™VCX™VisualMax™VoltagePlus™XS™
®
™
Datasheet Identification Product Status Definition
Advance Information Formative / In Design Datasheet contains the design specifications for product development. Specifications may change in any manner without notice.
Preliminary First ProductionDatasheet contains preliminary data; supplementary data will be published at a later date. Fairchild Semiconductor reserves the right to make changes at any time without notice to improve design.
No Identification Needed Full Production Datasheet contains final specifications. Fairchild Semiconductor reserves the right to make changes at any time without notice to improve the design.
Obsolete Not In Production Datasheet contains specifications on a product that is discontinued by Fairchild Semiconductor. The datasheet is for reference information only.
ANTI-COUNTERFEITING POLICYFairchild Semiconductor Corporation’s Anti-Counterfeiting Policy. Fairchild’s Anti-Counterfeiting Policy is also stated on our external website, www.Fairchildsemi.com, under Sales Support.Counterfeiting of semiconductor parts is a growing problem in the industry. All manufactures of semiconductor products are experiencing counterfeiting of their parts. Customers who inadvertently purchase counterfeit parts experience many problems such as loss of brand reputation, substandard performance, failed application, and increased cost of production and manufacturing delays. Fairchild is taking strong measures to protect ourselves and our customers from the proliferation of counterfeit parts. Fairchild strongly encourages customers to purchase Fairchild parts either directly from Fairchild or from Authorized Fairchild Distributors who are listed by country on our web page cited above. Products customers buy either from Fairchild directly or from Authorized Fairchild Distributors are genuine parts, have full traceability, meet Fairchild’s quality standards for handing and storage and provide access to Fairchild’s full range of up-to-date technical and product information. Fairchild and our Authorized Distributors will stand behind all warranties and will appropriately address and warranty issues that may arise. Fairchild will not provide any warranty coverage or other assistance for parts bought from Unauthorized Sources. Fairchild is committed to combat this global problem and encourage our customers to do their part in stopping this practice by buying direct or from authorized distributors.
Rev. I66
tm
®
FQP5N
60C / FQ
PF5N60C
— N
-Channel Q
FET® M
OSFET