www.morseindustries.com

Frameless shower products

Charlotte • Los Angeles • Seattle

Shower Door Hinges & Clamps

Morse Industries shower glass clamps are made of solid brass in a variety of finishes and can accommodate 3/8” to 1/2” (10 to 12 millimeter) glass. Used for securing fixed panels in a shower enclosure application, they may be attached to curb, ceiling or wall. Clear silicone can be added to provide a clean, water tight appearance.

traditional Glass clampsAvailable in Brushed Nickel, Polished Bright Chrome and Oil Rubbed Bronze. Hole diameter required: 5/8” (16mm), 3/4” (19mm).

Part# Description

C50-0031 Traditional Style Fixed Panel ClampC50-0032 Oversized Fixed Panel Clamp Each clamp includes neoprene gaskets and fasteners

C50-00311 3/4” x 1 3/4”

C50-00321 3/4” x 1 15/16”

heavy duty hole-In-Glass style clampsAvailable in Brushed Nickel, Polished Bright Chrome and Oil Rubbed Bronze. Hole diameter required: 3/4” (19mm).

Part# Description

C50-0033 Square Edge - Hole in Glass Wall Mount ClampC50-0034 Beveled Edge - Hole in Glass Wall Mount Clamp Each clamp includes neoprene gaskets and fasteners

C50-00332” x 2”

C50-00342” x 2”

Morse Industries shower hinges are made of solid brass with all moving parts (pins and springs) in stainless steel. A removable protective insert covers the interior rounded (“mouse ear”) portion of the hinge. This helps keep the glass from slipping off the hinge and protects it from metal contact, extending the life of both the hinge and the glass. Hinges are made to accommodate 3/8” to 1/2” (10 to 12 millimeter) glass, are self centering, and contain a 0° return with reversible 5° pin (preset 5° pins also available).

Paladia Series Hinges Available in Brushed Nickel, Polished Bright Chrome, and Oil Rubbed Bronze. Other finishes may also be special ordered.

Part# Description

C50-0001 Beveled Edge Wall Mount H-Back Plate HingeC50-0009 Beveled Edge Wall Mount Short Back Plate HingeC50-0002 Beveled Edge Wall Mount Offset Back Plate HingeC50-0003 Beveled Edge 180˚ Glass-to-Glass HingeEach hinge includes gaskets, cutting templates and fasteners

Roma Series Hinges Available in Brushed Nickel, Polished Bright Chrome, and Oil Rubbed Bronze. Other finishes may also be special ordered.

Part# Description

C50-0004 Square Edge Wall Mount Full Back Plate HingeC50-0010 Square Edge Wall Mount Short Back Plate HingeC50-0005 Square Edge Wall Mount Offset Back Plate HingeC50-0006 Square Edge 180˚ Glass-to-Glass HingeEach hinge includes gaskets, cutting templates and fasteners

C50-0011Square Edge Wall Mount

Full Back Plate Hinge

C50-0012Square Edge Wall Mount Short Back Plate Hinge

Note: The stud that goes through the hole made in the glass is positioned further from the edge of the glass than that of the standard clamp. This makes the Oversized Clamp the preferred clamps of most temperers for 1/2” (12mm) glass.

Frameless shower products

C50-0002 C50-0003C50-0001 C50-0009

C50-0004 C50-0005 C50-0006C50-0010

C50-0013Beveled Edge Wall Mount

H-Back Plate Hinge

Large Heavy Duty Hinges Available in Brushed Nickel, Polished Bright Chrome, and Oil Rubbed Bronze. Other finishes may also be special ordered. Each hinge includes gaskets, cutting templates and fasteners

C50-0014Square Edge Wall Mount Offset Back Plate Hinge

double towel BarIncludes both decorative removable metal washers as well as interior plastic washers to protect glass against metal contact. Available in Brushed Nickel, Polished Bright Chrome, and Oil Rubbed Bronze. Other finishes may also be special ordered.

Part# Length

C60-0030 18” C60-0031 24” C60-0032 26”Each handle includes an Allen wrench

clear pVc dual seal and wipe

Part# Description

V11-0010 3/8” Glass (98”)V11-0011 1/2” Glass (98”)

Back-to-Back shower door pullsIncludes both decorative removable metal washers as well as plastic interior washers to protect glass against metal contact. Available in Brushed Nickel, Polished Bright Chrome, and Oil Rubbed Bronze. Other finishes may also be special ordered.

Part# Length

C60-0006 6” C60-0008 8” Each handle includes an Allen wrench

1-800-325-7513 www.morseindustries.com

clear multi purpose h wipe

Part# Description

V11-001 3/8” Glass (98”)V11-002 1/2” Glass (98”)

A variety of PVC seals and edge wipes are available for your shower installation needs. All profiles are available for both 3/8” and 1/2” glass in 98” lengths.

clear pVc co-extruded Bottom wipe with drip rail

Part# Description

V11-0020 3/8” Glass (98”)V11-0021 1/2” Glass (98”)

PVC & Seal Wipes

Single Towel Bar with Shower Door Pull KnobIncludes both decorative removable metal washers as well as interior plastic washers to protect glass against metal contact. End caps are also available for both ends of towel bar to allow for bypass doors. Available in Brushed Nickel, Polished Bright Chrome, and Oil Rubbed Bronze. Other finishes may also be special ordered.

Part# Length

C60-0020 18”C60-0021 24”C60-0022 26” Each handle includes an Allen wrench

Towel Bars & Door PullsOur shower towel bars and pulls are constructed of 3/4” (19mm) stainless steel or brass tubing (inquire for availability) and are available in finishes matching our frameless shower hinge collection. 1” (25mm) is also available via special order.

Shower U-ChannelsU-Channels are typically used for fixed panel frameless shower systems. Available in polished bright chrome, polished bright gold, brushed nickel, oil rub bronze, and oil rub bronze metallic finishes in 8’ and 12’ lengths. Other finishes and lengths may also be available. 50 pieces per case, individually plastic sleeved for protection. Some finishes not available on all products, please inquire for availability.

A52-0219 for 3/8” glass

.563”

.375”

.08”

A52-0220 for 1/2” glass

.375”

.678”

.08”

A52-0221 for 3/8” glass

.75”

.563”

.08”

A52-0222 for 1/2” glass

.678”

.75”

.08”

V11-0030Clear Vinyl Insert

for 3/8” glass

A42-7479Snap In Filler

Insert

.50”

.56”

1.080”

.522”

.750”

.565”

1.250”

A42-7469Header

.339” .219”

Both header and snap in filler insert are available in polished bright chrome, brushed nickel, and oil rub bronze. Header is available in 98” and 12’ lengths. Snap in filler insert is available in 3’ and 6’ lengths. Other finishes and lengths may also be special ordered. Clear flexible vinyl insert is sold by the foot.

Shower Header, Snap In Filler & Vinyl Insert

Brass ConnectorsBrass Connectors are used to join the A42-7469 header channel in various configurations.

B42-9797 90˚ Brass Corner Mount

B42-9798 135˚ Brass

Corner Mount

B42-9799 Adjustable Brass

Corner Mount

B42-9796 Brass Wall Mount

Anchor Set

For nearly 30 years, Morse Industries has partnered with customers to build a company driven by customer needs. We work closely with our customers to fulfill requests in a timely and efficient manner while providing advice on our products and applications.

Our goal is simple: To exceed your expectations by providing you quality products with convenient and reliable service.

1.800.325.7513

Charlotte • Los Angeles • Seattle

25811 74th Avenue South • Kent, WA 98032

www.morseindustries.com

please call for complete details on our 3 Year limited shower door Hinge Warranty