friction welding
TRANSCRIPT
![Page 1: friction welding](https://reader035.vdocuments.net/reader035/viewer/2022062220/55693eecd8b42a2c788b495f/html5/thumbnails/1.jpg)
Aluminum Frcition Welding
![Page 2: friction welding](https://reader035.vdocuments.net/reader035/viewer/2022062220/55693eecd8b42a2c788b495f/html5/thumbnails/2.jpg)
Contents
• Concept of friction welding.• Types of friction welding
(Inertia, stir )• Metallurgy of friction welding.• Advantages & disadvantages.• Applications.
.
![Page 3: friction welding](https://reader035.vdocuments.net/reader035/viewer/2022062220/55693eecd8b42a2c788b495f/html5/thumbnails/3.jpg)
Concept of friction
• What is Friction Welding?• Friction welding is a solid-state process (non-fusion) that is
achieved through frictional heat.• This heat is generated by controlled contact of two
components until material reaches its plastic state, at which time plasticized material begins to form layers that intertwine with one another.
• The friction welding machine controls this contact through a series of unique parameters for rotational speed (rpm’s), axial force and time.
• Once these parameters are established, they are recorded, stored and then repeated with each cycle of the machine
![Page 4: friction welding](https://reader035.vdocuments.net/reader035/viewer/2022062220/55693eecd8b42a2c788b495f/html5/thumbnails/4.jpg)
Types of friction welding
Friction welding
Inertia Stir
![Page 5: friction welding](https://reader035.vdocuments.net/reader035/viewer/2022062220/55693eecd8b42a2c788b495f/html5/thumbnails/5.jpg)
Types of friction welding
Inertia friction welding:
In Inertia Welding, one of theworkpieces is connected to aflywheel and the other isrestrained from rotating. Theflywheel is accelerated to apredetermined rotational speed,storing the required energy. The drive motor is disengaged andworkpieces are forced together by the friction welding force.
![Page 6: friction welding](https://reader035.vdocuments.net/reader035/viewer/2022062220/55693eecd8b42a2c788b495f/html5/thumbnails/6.jpg)
Types of friction welding
Stir Friction Welding:The frictional heating causes a softened zone of material to form around the probe. This softened material cannot escape as it is constrained by the tool shoulder.
As the tool is traversed along the joint line, material is swept around the tool probe between the retreating side of the tool (where the local motion due to rotation opposes the forward motion) and the surrounding undeformed material.
![Page 7: friction welding](https://reader035.vdocuments.net/reader035/viewer/2022062220/55693eecd8b42a2c788b495f/html5/thumbnails/7.jpg)
![Page 8: friction welding](https://reader035.vdocuments.net/reader035/viewer/2022062220/55693eecd8b42a2c788b495f/html5/thumbnails/8.jpg)
Advantages & Disadvantages
Advantages of Friction Welding:• Strong welds for all geometries.• Narrowest heat affected zones .• Short weld times save you time and money.• There is no melting ,hence no solidification defects occur, gas
porosity , and segregation .• Easy to manage with only two quality control parameters - RPM and
Pressure.• Used for some alloys which are not fusion weldable like , AL 7075.• Limitless panel length and width.• Join dissimilar alloys.
![Page 9: friction welding](https://reader035.vdocuments.net/reader035/viewer/2022062220/55693eecd8b42a2c788b495f/html5/thumbnails/9.jpg)
Advantages & Disadvantages
Disadvantages:• Worm holes• Oxide film due to Zn affecting surface
tension of weld pool reduced diffusion.• Cannot easily be used for making fillet
welds.
![Page 10: friction welding](https://reader035.vdocuments.net/reader035/viewer/2022062220/55693eecd8b42a2c788b495f/html5/thumbnails/10.jpg)
Metallurgy
• Deformation mechanisms:(Boundary diffusion- recrystallization ) • Strengthening mechanisms:-Fine graining
![Page 11: friction welding](https://reader035.vdocuments.net/reader035/viewer/2022062220/55693eecd8b42a2c788b495f/html5/thumbnails/11.jpg)
Metallurgy
Mechanical Properties:
1-Strength• Higher after process due to :
-fine graining.
+-increase of welding speed.
![Page 12: friction welding](https://reader035.vdocuments.net/reader035/viewer/2022062220/55693eecd8b42a2c788b495f/html5/thumbnails/12.jpg)
Metallurgy
2-Hardening:• higher due to Precipitation hardening
By aging.
![Page 13: friction welding](https://reader035.vdocuments.net/reader035/viewer/2022062220/55693eecd8b42a2c788b495f/html5/thumbnails/13.jpg)
Applications
Space shuttle technology:• Using frictional stir welding in external tanks
because of :
-high strength.
-low defects.• Replacing AL 2219 with
AL-LI 2195 reducing 3400kg .