fritsjurgens system m+/m
TRANSCRIPT
FRITSJ U RGENS SYSTEM M+/M
SYSTEM M+ SYSTEM M
System M+ offers absolute control over the movement of pivot doors that weigh 20 to 500 kg and System M does this for doors between 20 and 210 kg. Both systems are equipped with FlowMotion technology.
SYSTEM SPECI FICATIONS SYSTEM SPECI FICATIONS
M32+ SCAM32+ SCBM32+ SCCM32+ SCDM32+ SCE
M32 SCAAM32 SCAM32 SCBM32 SCC
M42+ SCFM42+ SCG
Types Types
DOOR SPECI FICATIONS DOOR SPECI FICATIONS
Double-acting | 180º rotation Single-acting | 90º rotation with door frames**Due to Latch Control (see previous page)
Double-acting | 180º rotation Single-acting | 90º rotation
Door acting Door acting
Self-closing from 125º and -125º to 0ºDamper Control - Back-check for damping on opening, soft-close.30° Speed Control - Adjustable closing speed in last part of closing.Latch Control - Accelerates the door shortly before closed position.
All controls can be individually adjusted from the bottom of the door.
Self-closing from 125º and -125º to 0ºDamper Control - Back-check for damping on opening, soft-close.
Control can be individually adjusted from the bottom of the door.
Door movement Door movement
DOOR MOVEMENT DOOR MOVEMENT
Hold positions 90º, -90º and 0º
20-500 KG
400 - 5000 mm
Unlimited
Min. 91 mm from pivot point to short side
M32+ 40 mm M42+ 50 mm
Hold positions 90º, -90º and 0º
20-210 KG
400 - 4400 mm
Unlimited
Min. 91 mm from pivot point to short side
40 mm
Hold positioning
Weight capacity
Door width
Door height
Pivot point
Min. door thickness
Hold positioning
Weight capacity
Door width
Door height
Pivot point
Min. door thickness
M32+ 294,8 x 32 x 99,6 mm
2,6 KG
Stainless Steel | Anodized aluminum
EN 1670 - class 5 (norm:0-5)
294,8 x 32 x 99,6 mm
2,6 KG
Stainless Steel | Anodized aluminum
EN 1670 - class 5 (norm:0-5)
M42+ 308,2 x 42 x 112,7 mm
3,6 KG
Dimensions
Weight
Material
Corrosion resistance
Dimensions
Weight
Material
Corrosion resistance
1
3
2
4
1
3
2
4
System M+ and System M include the components stated above. Both a square and a round floor plate are available in stainless steel (series 420) and PVD black. The floor plates are made of solid tempered steel and therefore fully corrosion and scratch resistant. The ceiling plate is also available in stainless steel and black to match with the chosen floor plate.
SYSTEM M COMPON ENTSSYSTEM M+ COMPON ENTS
1. Ceiling plate (300352) 2. Top pivot (200201)3. System M (100332)4. Square floor plate (400711) or Round floor plate (400401)
Ceiling plate and floor plate in stainless steel (Series 420) or PVD black.Including mounting set (704000)
1. Ceiling plate (300352) 2. Top pivot (200201)3. System M+ (100532)4. Square floor plate (400711) or Round floor plate (400411)
Ceiling plate and floor plate in stainless steel (Series 420) or PVD black.Including mounting set (704000)
80º
10º
50º80º
50º
30º
In System M+ and System M the movement of the pivot door is created and controlled by FlowMotion. System M+ provides extra levels of adjustability. It enables you to fully control the closing mo vement of the pivot door by means o f the 30° Speed Control and Latch Control.
SYSTEM M+WITH FLOWMOTION®
SYSTEM MWITH FLOWMOTION®
Damper Control has two functions. The hydraulic back-check protects the pivot door against touching the wall by providing adjustable resistance as the door approaches the 80° position. The closing damping makes the door close smoothly.
Damper Control has two functions. The hydraulic back-check protects the pivot door against touching the wall by providing adjustable resistance as the door approaches the 80° position. The closing damping makes the door close smoothly.
30º Speed Control allows you to fine-tune the speed of the pivot door through the last 30° of the closing movement.
Latch Control provides the ability to adjust the closing speed to latch the door properly. Latch Control enables the door to accelerate in the last 10° to ensure proper latching of the door.
DAMPER CONTROL DAMPER CONTROL
30º SPEED CONTROL
LATCH CONTROL
1 12L
Damper Control Ensures a smooth and elegant closing movement and protects your door from touching the wall (back-check).
30º Speed Control Allows you to determine the speed of the pivot door through the last part of the closing movement.
Latch Control Provides the ability to adjust the pivot hinge to latch the door properly.
Damper Control Ensures a smooth and elegant closing movement and protects your door from touching the wall (back-check).
1 1
2
L
SYSTEM M+WITH FLOWMOTION®
SYSTEM MWITH FLOWMOTION®
System M+ and System M both are equipped with FlowMotion technology. FlowMotion technology puts hydraulic power to use by turning it into a controlled, smooth door movement.
294,8
32
40
99,6
9
41
20
80
60
Ø17
40
32 165
1
3
2
4
TECH N ICAL DRAWI NG SYSTEM M32+
1. Ceiling plate (300352) 60 x 40 x 17 mm
2. Top pivot (200201) 165 x 32 x 41 mm
3. System M32+ (100532) 294,8 x 32 x 99,6 mm
4. Square floor plate (400711) 80 x 40 x 9 mm Optional: Round floor plate (400411) Ø80 x 9 mm
Downloads
System M32+ 2D drawing
System M32+ 3D drawing
System M32+ BIM model
308,2
42
112,7
9
8040
1
3
2
4
40
41
20
60
32 165
Ø17TECH N ICAL DRAWI NG SYSTEM M42+
1. Ceiling plate (300352) 60 x 40 x 17 mm
2. Top pivot (200201) 165 x 32 x 41 mm
3. System M42+ (100332) 308,2 x 42 x 112,7 mm
4. Square floor plate (400711) 80 x 40 x 9 mm Optional: Round floor plate (400411) Ø80 x 9 mm
Downloads
System M42+ 2D drawing
System M42+ 3D drawing
System M42+ BIM model
1
3
2
4294,8
32
40
99,6
9
41
20
80
60
40
32 165
Ø17TECH N ICAL DRAWI NG SYSTEM M
1. Ceiling plate (300352) 60 x 40 x 17 mm
2. Top pivot (200201) 165 x 32 x 41 mm
3. System M32 (100332) 294,8 x 32 x 99,6 mm
4. Square floor plate (400711) 80 x 40 x 9 mm Optional: Round floor plate (400411) Ø80 x 9 mm
Downloads
System M 2D drawing
System M 3D drawing
System M BIM model
The floor plate is available in two finishes and shapes: brushed stainless steel (Series 420) and PVD black and can be obtained in a round and a rectangular version. The floor plates by FritsJurgens are made of solid tempered steel and therefore fully scratch resistant. The ceiling plate is available in brushed stainless steel and black as well and can be obtained in the rectangular version only.
DESIGN OPTIONS SYSTEM M+/M
Square floor plate (400711)Stainless steel (Series 420)80 x 40 x 9 mmDownload drawing 2DDownload drawing 3D
Square floor plate (400712)PVD black80 x 40 x 9 mmDownload drawing 2DDownload drawing 3D
Round floor plate (400411)Stainless steel (Series 420)Ø80 x 9 mmDownload drawing 2DDownload drawing 3D
Round floor plate (400412)PVD blackØ80 x 9 mmDownload drawing 2DDownload drawing 3D
Ceiling plate (300352)Stainless steel (Series 420)60 x 40 x 17 mmDownload drawing 2DDownload drawing 3D
Ceiling plate (300353)PVD black60 x 40 x 17 mmDownload drawing 2DDownload drawing 3D
B A
C
SYSTEM M+/M MODEL SELECTOR
Does your pivot door have other measurements than shown here? Please do not hesitate to contact us. FritsJurgens has an on-site testing facility which enables us to determine whether our systems are suitable for your specific situation.
To ensure the pivot hinge provides the appropriate movement for your door,
System M+ is available in seven models and System M in four models suited to
the weight and width of the door. There are no limits to the height of the door.
System M+ is suitable for pivot doors covering a range between 20 and 500 kg
and is suitable for single- and double-acting doors. When combined with the
door frames, the Latch Control ensures the door closes properly.
System M is suitable for pivot doors covering a range between 20 and 210 kg.
EXAMPLE
Use the selection table on the next page.
Specifications door: Width 1600 mm, height 3200 mm, weight 165 kg. The
distance between the pivot point of the hinge and the side of the door is 91 mm.
1. Determine the distance of pivot point to the latch side of the door:
C minus B = A: 1509 mm
2. Check the door width
C = 1600 mm
3. Fill in the weight
KG = 165 kg
The following system suits this door:
M32(+) SCD
www.fritsjurgens.com/M
490 - 500 480 - 489 470 - 479 460 - 469 450 - 459 440 - 449 430 - 439 420 - 429 410 - 419400 - 409390 - 399380 - 389 370 - 379360 - 369350 - 359340 - 349 330 - 339320 - 329310 - 319300 - 309290 - 299280 - 289270 - 279260 - 269250 - 259240 - 249230 - 239220 - 229210 - 219200 - 209190 - 199180 - 189170 - 179160 - 169150 - 159140 - 149130 - 139120 - 129110 - 119100 - 10990 - 9980 - 8970 - 7960 - 6950 - 5940 - 4930 - 3920 - 29
400499491800
5005995911000
6006996911200
7007997911400
8008998911600
9009999911800
1000109910912000
1100119911912200
1200129912912400
1300139913912600
1400149914912800
1500159915913000
1600169916001699
1700179917913400
1800189918913600
1900199919913800
2000209920914000
2100219921914200
2200229922914400
2300239923914600
2400249924914800
2500
25915000
A
C
KG
M32+ SCA
M32+ SCB
M32+ SCC
M32+ SCD
M32+ SCE
M42+ SC F
M42+ SCG
SYSTEM M+ MODEL SELECTOR
AVAI LABLE I N SYSTEM M
www.fritsjurgens.com/M
490 - 500 480 - 489 470 - 479 460 - 469 450 - 459 440 - 449 430 - 439 420 - 429 410 - 419400 - 409390 - 399380 - 389 370 - 379360 - 369350 - 359340 - 349 330 - 339320 - 329310 - 319300 - 309290 - 299280 - 289270 - 279260 - 269250 - 259240 - 249230 - 239220 - 229210 - 219200 - 209190 - 199180 - 189170 - 179160 - 169150 - 159140 - 149130 - 139120 - 129110 - 119100 - 10990 - 9980 - 8970 - 7960 - 6950 - 5940 - 4930 - 3920 - 29
400499491800
5005995911000
6006996911200
7007997911400
8008998911600
9009999911800
1000109910912000
1100119911912200
1200129912912400
1300139913912600
1400149914912800
1500159915913000
1600169916001699
1700179917913400
1800189918913600
1900199919913800
2000209920914000
2100219921914200
2200229922914400
2300239923914600
2400249924914800
2500
25915000
A
C
KG
M32 SCA
M32 SCA A
M32 SC B
M32 SCC
SYSTEM M MODEL SELECTOR
AVAI LABLE I N SYSTEM M+
www.fritsjurgens.com/M