front bumper...

FRONT BUMPER REMOVAL/INSTALLATION

Disconnect the negative battery cable.1.

Remove the radiator grille. (See RADIATOR GRILLE REMOVAL/INSTALLATION .)2.

Remove the front combination light. (See FRONT COMBINATION LIGHT REMOVAL/INSTALLATION .)3.

Disconnect the front fog light connector.4.

Remove in the order indicated in Fig 1 or Fig 2.

Standard

5.

2006 Mazda Eng ES

Printer Friendly View http://www1.prodemand.com/Print/Index?content=article&module=false&tab=false&terms=fal...

1 of 10 9/15/2014 11:48 AM

Edited with the trial version of Foxit Advanced PDF Editor

To remove this notice, visit:www.foxitsoftware.com/shopping

http://www.foxitsoftware.com/shopping

Fig 1: Removing Front Bumper (Standard)


2 of 10 9/15/2014 11:48 AM





3 of 10 9/15/2014 11:48 AM




Sports

Install in the reverse order of removal.6.

Courtesy of MAZDA MOTORS CORP.


4 of 10 9/15/2014 11:48 AM




Fig 2: Removing Front Bumper (Sports)


5 of 10 9/15/2014 11:48 AM





6 of 10 9/15/2014 11:48 AM




Front Bumper Removal Note

Pull the front bumper ends (wheel arch) outward to disengage from the bumper slider.

CAUTION:

If only one side of the front bumper is

disengaged from the bumper slider and

the bumper falls, it could be damaged.

When disengaging the front bumper from

the slider, secure the bumper so that it

does not fall.

1.

1.

Remove the front bumper from the body.2.



7 of 10 9/15/2014 11:48 AM




Fig 3: Pulling Front Bumper Ends


8 of 10 9/15/2014 11:48 AM





9 of 10 9/15/2014 11:48 AM




Front Bumper Installation Note

Spread the front bumper ends (wheel arches) apart.1.

Attach the front bumper to the body.2.

Press the front bumper connections into the body to engage with the bumper slider.3.



10 of 10 9/15/2014 11:48 AM




front bumper...

Documents