fs-p3102d/ds/dg) fs-p3102d fs-p3102ds fs-p3102dg

Specification(1.3)1

THIS DOCUMENT CONTAINS INFORMATION CONFIDENTIAL AND PROPRIETARY TO D&T CORPORATION AND SHALL NOT BE REPRODUCED OR TRANSFERRED TO OTHER DOCUMENTS OR DISCLOSED TO OTHERS OR USED FOR ANY PURPOSE OTHER THAN THAT FOR WHICH IT WAS OBTAINED WITHOUT THE EXPRESSED AND WRITTEN CONSENT OF D&TCORPORATION.

APPROVAL

DRAWN CHECKED APPROVED

GC.JANG OJ.KWON

2018.11.13 2018.11.13

PROPRIETARY NOTE

FS-P3102D/DS/DG)

Specification (1.3)

4K Real Medical LCD Monitor

FS-P3102DFS-P3102DSFS-P3102DG

4K Medical Grade Monitor

THIS DOCUMENT CONTAINS INFORMATION CONFIDENTIAL AND PROPRIETARY TO FSN MEDICAL TECHNOLOGIES AND SHALL NOT BE REPRODUCED OR TRANSFERRED TO OTHER DOCUMENTS OR DISCLOSED TO OTHERS OR USED FOR ANY PURPOSE OTHER THAN THAT FOR WHICH IT WAS OBTAINED WITHOUT THE EXPRESSED AND WRITTEN CONSENT OF FSN MEDICAL TECHNOLOGIES.

Specification(1.3)2

TABLE OF CONTENTS

1. Overview ------------------------------------------------------------------------------------------------ 3 1.1 Scope1.2 Revision History

2. General Features -------------------------------------------------------------------------------------- 42.1 General Description

3. Product Specification ------------------------------------------------------------------------------- 53.1 Electrical Specifications3.2 Power Management3.3 Signal connector PIN assignments3.4 Inputs Signal Timings.3.5 Environmental and Reliability

4. Regulatory --------------------------------------------------------------------------------------------- 124.1 EMC & Safety Approvals

5. OSD specification ------------------------------------------------------------------------------------- 135.1 OSD User functions/ Messages5.2 OSD representation5.3 OSD System overview

6. Window layout and PIP combination ------------------------------------------------------------ 166.1 Window Layout6.2 SDI source compatibility6.3 PIP/PBP Combination Table

7. Mechanical specification --------------------------------------------------------------------------- 177.1 Product dimension.(FS-P3102DS)7.2 Connector label.(FS-P3102DS)7.3 Product dimension(FS-P3102D)7.4 Connector label.(FS-P3102D)7.5 Product dimension(FS-P3102DG)7.6 Connector label.(FS-P3102DG)

8. Packing ---------------------------------------------------------------------------------------------------- 29 8.1 Packing

6

13

14

17

19

Specification(1.3)3

1. Overview

FS-P3102D(S/G) product has been specifically designed to use for the professional applications. We understand that although space is limited in the OR, quality must not be compromised. Our complete medical monitor selection offers functionality, reliability, large‐screen and all major inputsfor high resolution: DP, HDMI, SDI, DVI

Key feature■ Ultra‐high resolution (4,096 x 2,160 pixels).■ LED technology and High brightness technology.■ Designed for medical use.■ Rugged, IP33 liquid resistant housing.■Withstands repeated easy cleaning.■Mounts securely to booms or custom yokes.■ Firmware can be upgraded and customized.

1.1 Scope

1.2 Revision History

Date Paragraph Change Description

2017.1.20 Preliminary Initial release.

2017.4.7 0.1 1, Updated available mode table 2, Modified OSD related items.

2017.6.7 0.2 1, Updated weight of product .2, Updated OSD design.3, Updated Power consumption.

2017.6.26 0.3 1, Updated to SDI board option related items.2, Added SDI 2-sample interleave related items.

2017.7.25 0.4 1,Updated power consumption, weight and I/O spec for FS-P3102D model.

2, Updated regulatory.

2017.8.17 0.5 1, Changed to DVI-I type.2, Updated regulatory.

2017.8.18 1.0 1, Source and Layout menu changed.(page #13)2, Change color temp text.(page #14)3, Auto mode added on “Aspect ratio”.(page #14)

2018.03.26 1.1 1, Updated regulatory.(CCC)2. Update OSD menu.(Add rotate/mirror menu)3, Update power consumption.4, Update accessory items.

2018.04.20 1.2 1, Update product weight and labels.(product and box)

2018.11.13 1.2 1, Update product and labels.

• 4K DCI (4096 wide pixel resolution).

• Optical bonding for the best image (FS-P3102DS, FS-P3102DG).

• Backward compatibility with HD and SD.

The FS-P3102D series of surgical displays from FSN offer everything needed to present the best possible images to medical professionals.

4K Video Ready Depending on the preferred model, compatible signal/connector types include HDMI, DisplayPort, DVI, or SDI. Multiple images can be shown together on the same screen, using PIP or PBP. Using optional SDI connections, there is quad screen layout setting. Multi-screen viewing provides simultaneous reference to different image modalities that may be required during a procedure.

Designed for Human Interaction The FS-P3102D series is designed with edge-to-edge protective front glass. This gives the monitor its slim, sleek appearance, and allows for easy cleaning of the monitor’s front surface. There are no recessed areas on the front for unwanted materials to collect, thus improving sanitization practices. Rounded bezel corners help guard against bumping injuries, especially in today’s active operating room environments. A back cable cover is provided with each monitor to manage cords and wires.

FSN goes to great lengths to assure that monitor viewing angles remain as high as possible. This means that several clinicians can view the display in the same room without distortion or loss of image quality.

Specification(1.3)4

2.1 General Description

2. General Features

Item Description

Model FS-P3102D(S/G)

LCD Panel

Type 31” TFT LCD MEDICAL DISPLAY

Screen Size 31” (17:9)

Resolution 4,096 x 2,160 pixels

Active area 697.958(H)mm x 368.064(V)mm

Pixel pitch 0.1704 x 0.1704 mm

Response Time 11 ms(Typ, Rise Time)

Number of colors 1.07 Billion colors

VisualPerformance

Luminance 350 cd/m² (Typical)

Contrast Ratio 1500 : 1 (Typical)

Viewing Angle R/L 178 degree, U/D 178 degree where CR > 10

Color Gamut Native : DCI, AdobeCalibrated mode : sRGB/REC.709

Input Signal 3G SDI 1 x HDMI 2.01 x DP 1.2 (MST)1 x DP 1.2 (SST)1 x DVI (Single Link)4 x SDI (3G) : (*Optional)

12G SDI 1 x HDMI 2.02 x DP 1.2 (SST)1 x DVI (Single Link)4 x SDI (2 x 12G) : (*Optional)

Output Signal 3G SDI 1 x DVI(Single Link)1 x DP 1.2 (SST)4 x SDI (3G) : (*Optional)

12G SDI 1 x DVI(Single Link)1 x DP 1.2 (SST)4 x SDI (2 x 12G) : (*Optional)

(available on FS-P3102DS)

(available on FS-P3102DS)

(available on FS-P3102DG)

(available on FS-P3102DG)

Specification(1.3)5

2.1 General Description

Item Description

GPIO port 3 Function : Source change, Single/PBP/PIP select, Record indicator

External Control RS-232C, USB-B TYPE(For Touch Controller)

Power Supply AC/DC Adaptor (AC 100~240V, DC 24V/6.6A)

Power Consumption 110W max

Control Key Power, Menu, PIP, Up, Down, Plus, Minus, Input

Unit Dimension 761.5(W) x 442(H) x 70.6(D) (mm) 29.98(W) x 17.4(H) x 2.788(D) (inch)

IP Rating IP33(Overall)

Weight 10.5 Kg / 23.15 lbs (Monitor Only, FS-P3102D)

11 Kg / 24.25 lbs (Monitor Only, FS-P3102DS/DG)

FS-P3102D 90W max FS-P3102DS, FS-P3102DG 110W max

10.45 kg, 23.04 lbs. (monitor with cover) FS-P3102D

11.07 kg, 24.41 lbs. (monitor with cover) FS-P3102DS, FS-P3102DG

Specification(1.3)6

3.1 Electrical Specifications

3. Product Specification

3.1.1 Power supply

Item Specification

Min Typ Max Unit

Description AC/DC Adapter (ATM160T-P240)

Input Rated Voltage 100 240 Vac, Normal

Voltage Range 90 264 Vac

Rated Line Frequency

50 60 Hz

Line Frequency Range

47 63 Hz

Current 1.8A max at 100Vac input

Protection Over voltage, Short circuit, Over current, Over temperature protection

Configuration Inlet type : IEC320-C14

Output Voltage /Current +24Vdc at 6.6A

Line regulation +24Vdc +/-5%

Load regulation +24Vdc +/-5%

Ripple and Noise Less than 1% of rated DC voltage (480mV p-p Max): at 20MHz Bandwidth and full load.

Transient Response 0.5ms for 50% Load change Typ

Hold-up time 20mSec min @ 100VAC/60Hz, Full load

Protection OVP : V out * 150% Max.SCP : Automatic recovery after short-circuit fault being removed.OCP : I out * 150% Max.OTP : Shut down.

Operating Temperature 0 40 ℃

Storage Temperature -20 80 ℃

Humidity 10 90 %

Altitude 0 TBD feet

Cord and length UL2464 ,16AWG*4C.W/Shield, SL405F Connector, 1900mm

Dimension 183.2(L) x 81.0(W) x 42.3(H) , mm

Specification(1.3)7

This system saves energy by switching your monitor into a low power mode when it has not been used for a certain period of time. Power Management system operates with a video card installed in your computer. You use a software utility installed on your computer to set up this feature.

3.2 Power management

NOTE : This monitor automatically returns to normal operation when horizontal and vertical syncreturn. This occurs when you move the computer’s mouse or press a key on the keyboard.

State Normal Operation

DPMS Standby DPMS suspend POWER Off (OSD button)

POWER Off (DC S/W)

Horizontal Sync Active Inactive Active Inactive Inactive

Vertical Sync Active Active Inactive Inactive Inactive

Video Active Blanked Blanked Blanked Blanked

Power Indicator Off Blue Flashing (1 sec. Interval)

Blue Flashing (1 sec. Interval) Blue Off

Power Consumption(FS-P3102DS)

≤ 110W ≤ 40W ≤ 40W ≤ 20W ≤ 0.5W

Power Consumption(FS-P3102D)

≤ 90W ≤ 40W ≤ 40W ≤ 20W ≤ 0.5W

3.3 Signal connector PIN assignments

Pin No. Assignment Pin

No. Assignment

1 Lane3- 11 Ground

2 Ground 12 Lane0+

3 Lane3+ 13 Config1

4 Lane2- 14 Config2

5 Ground 15 Aux+

6 Lane2+ 16 Ground

7 Lane1- 17 Aux-

8 Ground 18 Hot Plug Detect

9 Lane1+ 19 Return

10 Lane0- 20 Power(3.3V 500mA)

3.3.1 Displayport input interface connector

Power Consumption FS-P3102DS, FS-P3102DG

Specification(1.3)8

3.3.2 Displayport output interface connector


No. Assignment

1 Lane0+ 11 Ground

2 Ground 12 Lane3-

3 Lane0- 13 Config1

4 Lane1+ 14 Config2

5 Ground 15 Aux+

6 Lane1- 16 Ground

7 Lane2+ 17 Aux-

8 Ground 18 Hot Plug Detect

9 Lane2- 19 Return

10 Lane3+ 20 Power(3.3V 500mA)

Pin No. Assignment

1 SDI Input

2 Ground

3.3.3 SDI input interface connector (Optional)


No. Assignment

1 T.M.D.S. Data2+ 11 T.M.D.S. Clock Shield

2 T.M.D.S. Data2 Shield 12 T.M.D.S. Clock-

3 T.M.D.S. Data2- 13 CEC

4 T.M.D.S. Data1+ 14 Reserved

5 T.M.D.S. Data1 Shield 15 SCL

6 T.M.D.S. Data1- 16 SDA

7 T.M.D.S. Data0+ 17 Ground

8 T.M.D.S. Data0 Shield 18 +5V

9 T.M.D.S. Data0- 19 HPD

10 T.M.D.S. Clock+

3.3.4 HDMI input interface connector

Specification(1.3)9


No. Assignment

1 T.M.D.S. Data2 13 No Connection

2 T.M.D.S. Data2+ 14 +5V Power

3 T.M.D.S. Data2 Shield 15 Ground

4 No Connection 16 Hot Plug Detect

5 No Connection 17 T.M.D.S. Data0

6 DDC Clock 18 T.M.D.S. Data0+

7 DDC Data 19 T.M.D.S. Data0 Shield

8 No Connection 20 No Connection

9 T.M.D.S. Data1- 21 No Connection

10 T.M.D.S. Data1+ 22 T.M.D.S. Clock Shield

11 T.M.D.S. Data1 Shield 23 T.M.D.S. Clock+

12 No Connection 24 T.M.D.S. Clock

3.3.5 DVI input interface connector

Pin No. Assignment

1 5V

2 D-

3 D+

4 Ground

3.3.6 USB-B TYPE input interface connector

Pin No. Assignment

1 No Connection

2 TXD (Monitor -> PC)

3 RXD (PC -> Monitor)

4 No Connection

5 Ground

6 No Connection

7 No Connection

8 No Connection

9 No Connection

3.3.7 RS-232C input interface connector

* IMPORTANT

Do not use a null modem cable.

Use only a standard RS-232 cable.

Specification(1.3)10

Pin No. Assignment

1 Swap.(TBD)

2SINGLE, PBP,PIP selection.(TBD)

3Record Indicator.

(TBD)

4 Ground

3.3.8 GPIO interface connector

Pin No. Assignment

1 Ground

2 Ground

3 +24V (DC)

4 F.G

5 +24V (DC)

3.3.9 DC-POWER input interface connector

3.3.10 DC Output interface connector

Pin No. Assignment

1 5V / 2A (Max)

2 Ground

! This should be connected other equipment’s earth terminal.

3.3.11 Equipotential earth terminal

A : 1.65 mmB : 4.4 mm


3.4 Input Signal Timings

Signal FormatTiming information Signal Source

H-Freq(KHz) V-Freq(Hz) Clock(MHz) DP HDMI DVI SDI

800 x 600 @56Hz 35.16 56.25 36.00 O O O

800 x 600 @60Hz 37.88 60.32 40.00 O O O

800 x 600 @72Hz 48.08 72.19 50.00 O O O

800 x 600 @75Hz 46.88 75.00 49.50 O O O

800 x 600 @85Hz 53.67 85.06 56.25 O O O

1024 x 768 @60Hz 48.36 60.00 65.00 O O O

1024 x 768 @70Hz 56.48 70.07 75.00 O O O

1024 x 768 @75Hz 60.02 75.03 78.75 O O O

1024 x 768 @85Hz 68.68 85.00 94.50 O O O

1152 x 864 @75Hz 67.50 75.00 108.00 O O O

1280 x 960 @60Hz 60.00 60.00 108.00 O O O

1280 x 960 @85Hz 85.94 85.00 148.50 O O O

1280 x 1024 @60Hz 63.98 60.02 108.50 O O O

1280 x 1024 @75Hz 79.98 75.02 135.00 O O O

1280 x 1024 @85Hz 91.15 85.02 157.50 O O O

720p @50Hz 37.50 50.00 74.25 O O O O

720p @59.94 44.96 59.94 74.176 O O O O

720p @60Hz 45.00 60.00 74.25 O O O O

1080i @50Hz 28.13 50.00 74.25 O

1080i @59.94Hz 33.72 59.94 74.167 O

1080P @50Hz 56.25 50.00 148.50 O O O O

1080P @59.94Hz 67.43 59.94 148.352 O O O O

1080P @60Hz 67.50 60.00 148.5 O O O O

1920 x 2160 @60Hz 133.29 59.99 277.25 O O

3840 x 2160 @30Hz 67.50 30.00 297.00 O O

3840x2160 @50Hz 112.50 50.00 594.00 O O O(*)

3840 x 2160 @59.94Hz 134.87 59.94 593.407 O O O(*)

3840 x 2160 @60Hz 135.00 60.00 594.00 O O O(*)

4096 x 2160 @30Hz 67.50 30.00 297.00 O O

4096 x 2160 @50Hz 112.50 50.00 594.00 O O O(*)

4096 x 2160 @59.94Hz 134.87 59.94 593.407 O O O(*)

4096 x 2160 @60Hz 135.00 60.00 594.00 O O O(*)

* 12G SDI Input port , Quadrant and 2sample interleave mode only.


3.5 Environmental and Reliability

3.5.1 Environmental specification

Item Description

Operating conditions Temperature 0℃~ 40℃

Humidity 10% ~ 85%, non-condensing

Storage and transport conditions

Temperature -20℃~ 60℃

Humidity 10% ~ 85%, non-condensing

MTBF : more than 30,000 hours at 90% confidence level, excluding LCD panel.

3.5.2 Reliability specification


4. Regulatory

13

4.1 EMC & Safety Approvals

UL Safety Compliance:ANSI/AAMI ES60601-1:2005/(R)2012 and

C1:2009/(R)2012 and A2:2010/(R)2012, CSA CAN/CSA-C22.2 No. 60601-1:08

CB (CE-LVD) Compliance:This LCD monitor is investigated to IEC60601-1, 3rd Edition

CE-EMC Compliance:This LCD monitor is investigated to IEC60601-1-2:

FCC Compliance:This LCD monitor is investigated to FCC Part 15 Subpart B

CE-MDD Compliance:This LCD monitor is investigated to Class I according to Rule 12 of Annex IX, MDD 93/42/EEC

CCC Compliance:This LCD monitor is investigated to GB4943.1, GB9254, GB17625.1.

KC Compliance:This LCD Monitor is investigated to KN32 , KN35.

VCCI Compliance:This LCD Monitor is investigated to VCCI V-3.


5. OSD specification

5.1 OSD User functions/ Messages

Key Name Description

POWER Turns the monitor ON or OFF.- Press and hold about 2 seconds to turn it On and Off.

MENU Press the menu button to activate the OSD menu.- To close the OSD menu, press the menu button to exit from the main menu or a sub menu,

PIP Select windows layout like as Single, PBP, PIP.(Move “Up” and “Down” key and press “Plus”.)

* It’s not available during DP MODE is “1.2 MST”.

UP - Move the OSD cursor upward during the OSD menu is activated.

DOWN - Move the OSD cursor downward during OSD is activated.

PLUS - Enter the sub menu or increase the adjustment of the selected function.

MINUS - Decrease the adjustment of the selected function.

INPUT - Change input signal sources.(Move “Up” and “Down” key and press “Plus”.)< 3G SDI Model > < 12G SDI Model >

UP + PLUS - Enable or Disable the Key Lock function.

FS-P3102D(S/G) gives various and very easy graphic user interface. User can easily access to the function that user wants. 8 buttons keypad, located in right corner on the front of monitor, allows the user to make adjustments to various display parameters using on screen menus easily.Be sure that your system’s power is supplied.

5.1.1 OSD indicator


5.1.2 Menu

Menus Sub-menus Function Descriptions

COLOR ADJUSTMENT BRIGHTNESS Increases or decreases the brightness. (Range : 0~100)

CONTRAST Increases or decreases the contrast. (Range : 0~100)

SATURATION Increases or decreases the saturation. (Range : 0~100)

SHARPNESS Increases or decreases the sharpness. (Range : 0~4)

GAMMA Select the appropriate gamma. (BYPASS,1.8, 2.0, 2.2, 2.4, 2.6, DICOM)* Gamma can’t be changed during color space is “sRGB”.

COLOR SPACE Select the color space .(“sRGB” or “NATIVE”)* Gamma can’t be changed during color space mode is “sRGB”.

VIVIDNESS Sets the vividness of image. (Off, Low, Mid, High)It can enhance image quality with minimal artificial effect.

COLOR TEMPERATURE COLOR TEMP Changes the image color setting. (C1, C2, C3, USER)

RED Red balance. (Only works with USER mode) (Range : 0~100)

GREEN Green balance. (Only works with USER mode) (Range : 0~100)

BLUE Blue balance. (Only works with USER mode) (Range : 0~100)

OTHER SETTINGS ASPECT RATIO Changes aspect ratio of displayed image. (FULL, AUTO, 16:9, 16:10, 4:3, 5:4)

FREEZE Keeps the image still.

POWER ON DC5V Enabled or disabled the DC5V output.

POWER ON DP Enabled or disabled the DP power output.

DP MODE Select of Displayport mode.(1.2 SST or 1.2 MST)* DP multi-stream can support when it is selected to 1.2 MST.

SDI SOURCE SELSelect SDI input source.(SDI-1, SDI-2, SDI-3, SDI-4, SDI-QUAD, SDI-2SI)• SDI-QUAD or SDI-2SI : It can support 4K quadrant and 2-sample interleave division when signals input from the SDI-1 to SDI-4 connector.

OSD SETTINGS LANGUAGE Changes the OSD language. (9 language)

OSD TRANS Adjusts the OSD transparency.

OSD POSITION Changes the OSD position. ( 9 positions )

OSD MENU TIME Adjusts time until the OSD Menu will disappear after adjusting the menu. (Range : 10~60 seconds)

RESET Changes the all OSD value to factory outgoing status.


Menus Sub-menus Function Descriptions

SINGLE LAYOUT Changes the image layout. (SINGLE, PBP, PIP)

ROTATE/MIRROR Change the displayed image direction.(NORMAL, 180, H-MIR, V-MIR)

PBP LAYOUT Changes the image layout. (SINGLE, PBP, PIP)

WINDOW SELECT Select the window during PBP or PIP is activated.

INPUT SWAP Swap the position of the primary and secondary images.

PIP LAYOUT Changes the image layout. (SINGLE, PBP, PIP)

WINDOW SELECT Select the window during PBP or PIP is activated.

INPUT SWAP Swap the position of the primary and secondary images.

PIP SIZE Changes the PIP size. (Range : 0~10)

PIP POSITION Changes the PIP position.(L-Top, R-Top, Mid, L-Bot, R-Bot)

PIP TRANS Change the transparency of PIP image. (Range : 0~8)


6. Window Layout and PIP Combination

Window

- Single

6.3, PIP/PBP Combination Table.

DP1(SST) HDMI SDI(1,2,3,4, QUAD, 2-SI) DVI

DP1(SST) - O O O

HDMI O - O O

SDI(1,2,3,4, QUAD, 2-SI) O O - O

DVI O O O -

Win1(SDI-1)

Win2(SDI-2)

Win3(SDI-3)

Win4(SDI-4)

Win1 Win2Win1

Win2

- PBP- PIP

3) QUAD mode

SDI1, SDI2,SDI3, SDI4

1) SINGLE mode

SDI1 + SDI2 +SDI3 + SDI4

2) 2-SI mode

6.1, Window Layout

6.2, SDI source compatibility

For SDI quad view setting,Each connector is compatible With the four division imageas shown above.

For SDI single view setting,User can select which sourceShould be activated on OSD“SDI SOURCE SEL” menu.

6.3.1 3G Model.(Only available during “DP MODE” is “1.2 SST”.)FS-P3102DS (3G model) 1.2 SST is only available when using DP mode.


DP1(SST) DP2(SST) HDMI SDI(1,2,3,4, QUAD, 2-SI) DVI

DP1(SST) - O O O O

DP2SST) O - - O

HDMI O - - O O

SDI(1,2,3,4, QUAD, 2-SI) O O O - O

DVI O O O O -

6.3.1 12G Model.FS-P3102DG (12G model).


7. Mechanical Specification

7.1 Product dimension.(FS-P3102DS)

Power s/w


7.2 Connector label.(FS-P3102DS)


7.3 Product dimension.(FS-P3102D)

Power s/w


7.4 Connector label.(FS-P3102D)


7.5 Product dimension.(FS-P3102DG)

Power s/w


7.6 Connector label.(FS-P3102DS 12G)


7.7 Label dimension7.7.1 Product label and Box label.

Brand Logo FORESEESON Brand Logo FORESEESON

Model No. FS-P3102DS Model No. FS-P3102DS

Rating Label Location Right center Box Label Location Top at both side of box

(This may vary based on the Customer's request, and the changed contents of the Rating Label shall not be specified i

n this specification.)

Thickness 50 ㎛ Thickness 50 ㎛

Size 76mm x 70mm Size 90mm X 90mm

Material Polyester film Material Art paper

Base Color White Base Color White

(Non-Bonding) -3G

(Non-Bonding)-12G


7.7.2 Product label and Box label .

Brand Logo FORESEESON Brand Logo FORESEESON

Model No. FS-P3102DS(3G)FS-P3102DG(12G)

Model No. FS-P3102DS(3G)FS-P3102DG(12G)

Rating Label Location Right center Box Label Location Top at both side of box

(This may vary based on the Customer's request, and the changed contents of the Rating Label shall not be specified i

n this specification.)

Thickness 50 ㎛ Thickness 50 ㎛

Size 76mm x 70mm Size 90mm X 90mm

Material Polyester film Material Art paper

Base Color White Base Color White

(Bonding)-3G

(Bonding)-12G


7.7.3 Serial number format.


7.7.4 Storage condition (Storage condition is printed on the box)


8. Packing

8.1 Packing

8.1.1 Dimension (individual)

FS-P3102DS/DG

Set (Unpacking, Monitor only) 761.5(W) x 442(H) x 70.6(D) (mm) 11 Kg

Package (Full set) 910(W) x 235(H) x 745(D) (mm) 17 Kg

FS-P3102D

Set (Unpacking, Monitor only) 761.5(W) x 442(H) x 70.6(D) (mm) 10.5 Kg

Package (Full set) 910(W) x 235(H) x 745(D) (mm) 16.3 Kg

8.1.2 Contents

FS-P3102DMonitor with Cover 761.5(W) x 442(H) x 70.6(D) mm 10.45 kg

Shipping Package 914.4(W) x 749.3(H) x 234.95(D) mm 16.29 kg

FS-P3102DS, FS-P3102DGMonitor with Cover 761.5(W) x 442(H) x 70.6(D) mm 11.07 kg

Shipping Package 914.4(W) x 749.3(H) x 234.95(D) mm 17.17 kg


8.1.2 Composition of Pallet

1Pallet =18Set20FT= 10Set X 9Pallet 90Set40FT= 10Set X 19Pallet 190Set

Pallet size : 1100 x 1200 x 140

Item Remark

1 Monitor unit

2 AC power cord 1.8 meter, US/UK/CHINA/KOREA

3 Dsiplayport 1.2 cable 1.8 meter

4 DVI-D cable 2 meter

5 HDMI 2.0 cable 2.0 meter

6 AC-DC adaptor, 24V/160W 1.9 meter(ATM160TP240Q19201)

7 SDI BNC cable 1.8 meter , 4 pcs

8 VESA screw BH M4x14mm , 4 pcs

9 User Manual

fs-p3102d/ds/dg) fs-p3102d fs-p3102ds fs-p3102dg

Documents