FIRE SECURITY SYSTEMS

Wood Fire Protection1 KS & 2 KS

Exc

elle

nce

in T

echn

olog

y

Thin-film intumescent coatings for Timber (wood) surfaces

DESCRIPTION

Hensotherm 1 and 2 KS, are wood (timber) coatings applied to the surface to stop flame spread.

1 KS is a transparent intumescent fire protection coating. The natural surface of the wooden materials remains visible. 1 KS is an environmentally friendly building material according to LEED valuation.

2 KS Outdoor protects wooden building com-ponents outside.

2 KS Indoor is designed for interior use on wooden materials. In combination with top coat HENSOTOP both coatings are good for accents of creative colour.

1 and 2 KS are normally spray applied and are classified according to European Stan-dard, SBI-Test DIN EN13501-1

WHERE TO USE 1 & 2 KS

1 & 2 KS can be applied in residential, com-mercial and industrial construction where you would like to have a highly decorative finish while continuing to use your timber.

Why Use 1 & 2 KS?

Fire Protection with Aesthetic Appeal for wood.

1 & 2 KS has been designed to allow fire protection of wood without compromising aesthetic appeal or function-ality:- Complete primer, fireproofing and topcoat solution,- Applied as a thin layer that does not compromise intri-cate designs and shapes created by timber,- Easy over coating with a wide range of coloured (RAL) finishes.

REQUIRED DATA

Product Spread of Flame Approval 1 KS SBI-Test DIN EN13501-12 KS SBI-Test DIN EN13501-1Approvals SBI-Test DIN EN13501-1 - Spread of Flame

Transport / Storage - Transport and store free from frost- preferably at a minimum of +5oC to a maximum of +30oC.- shelf-life of unopened pails: 12 month from date of manufacture.- Opened pails must be re-sealed.

Packaging - 12.5 and 25 kg net weight- Plastic pails- Other sizes on request

Surface Preparation Please refer to the Technical Data Sheet

Application Please refer to the Technical Data Sheet

Drying Time Please refer to the Technical Data Sheet

Top Coats Please refer to the Technical Data Sheet

Safety and the Environment Please refer to the Technical Data Sheet

Provides intumescent fire protection to wood structures and materials while maintaining architectural aesthetics for commercial infra-structure assets including:

- Homes- Airports- Stadiums and Leisure Facilities- Office Buildings- Retail Complexes- Cinemas- Residential low and Highrise Apartments- Atriums

Provides intumescent fire protection to w

TYPICAL APPLICATIONS

Manufactured by Rudolf Hensel GmbH, Germany

FIRE SECURITY SYSTEMSNorway :

Skibåsen 20b -4636 Kristiansand NorwayTel:+ 47 95 47 80 00 Fax: +47 38 02 15 31

norway@fire-security.net

Canada:PO Box 21096, Coquitlam BC V3E 3P9 Canada

Tel:+1 604 941 1001 Fax: +1 604 648 9311mail@fire-security.net

www.Fire-Security.net

Disclaimer: The above data, particularly the recommendations for the application and use of Fire Security products are based on the manufacturer's knowledge and experience. Due to different materials and conditions of application, which are beyond our control, we recommend in any case to carry out sufficient tests in order to ensure that Fire Security products are suitable for the intended purpose and applications. Therefore, any liability for such recommendations or any oral advice is expressly excluded unless we have acted willfully or by gross negligence. It is always the responsibility of the installer / purchaser to guarantee correct preparation, DFT (Fire Security Coatings) and thickness (Fire Security Firestop Products) of all Fire Security products. Fire Security Systems is not liable for installation or faulty installation. It is always the responsibility of the installer / purchaser to guarantee and certify the installation of materials.

UAE :PO Box 40068

Ajman - United Arab EmiratesTel: +971 6 7478842 Fax: +971 6 7478843

UAE@fire-security.net