fttx - radius systems ltdradiustelecoms.com/uploadedfiles/6-1597849748-fttx... · 25 fttx...

FTTxCABLE PROTECTION SYSTEM

Smarter Infrastructurewww.radiustelecoms.com

2FTTx Microducting Systems

FTTx Microducting Systems

About Radius Systems

3

We have operated in the telecoms market since 1988 and we have a dedicated telecoms centre of excellence where our resident team of expert engineers deliver state of the art technology.

We supply many of the world’s top telecom operators, integrators and installers.

Our product offering includes traditional Telecoms Ducting such as HDPE low friction Sub-Duct, HDPE Twinwall and uPVC as well FTTx Microtubing systems for latest generation networks.

In addition our modular underground Access Chambers are suitable for use across various utilities and are ideal for telecoms applications.

BS OHSAS 18001:2007ISO 9001:2015

ISO 14001

We have been connecting the world with high quality Telecoms and FTTx products for 30 years.

Radius Systems is a part of The Polyplastic Group with manufacturing & distribution across Europe.

Our products have been supplied to:


Quality

Environment

Technical Support

Health & Safety

We are committed to the highest levels of quality for the design, manufacturing, performance, durability and delivery of our products. We source the best materials and we use modern and efficient manufacturing, inspection and testing methods and maintain an effective Quality Management System under the auspices of of ISO 9001:2015.

We focus on high levels of customer service, courtesy, consistency and rapid response to suit our fast moving markets. Our culture is to be continually improving our service, products, systems and processes.

As a manufacturer, we take our environmental responsibilities very seriously and we work internally with customers and in partnership with suppliers to reduce carbon emissions across the whole supply chain.

In addition to the legislative compliance with ISO 18001 and ISO 14001 we have won several awards for our environmental initiatives.

We take pride in developing innovative yet cost effective solutions for telecom infrastructure requirements and developing long-term sustainable customer partnerships.

We strive to work closely with our partners in terms of technical support, training, product development and supply chain services to ensure that we provide the best tailored solutions.

Our expert team of engineers offer a design and development service for new products and the optimisation of existing products and we provide full technical field service backup for our products.

The health and safety of our employees and customers is at all times of paramount importance to Radius Systems.

In addition to compliance with BS OHSAS 18001:2007 for the manufacture of polyethylene and PVC pipes and fittings for telecoms, gas, water and industrial applications, we also adhere to good working practices across our whole business, which is essential to achieve the high standards that we and our customers expect.

FTTx Microducting Systems25

About FTTx

Radius FTTx Solutions

We offer a comprehensive range of ducting infrastructure solutions suitable for the numerous applications of FTTx networks. Our product offering has been specially designed and developed to provide optimal performance for cable installation by blowing method. The range is suitable for use with the latest mini fibre optic cables and blown fibre units.

Backbone

Business MDUs

Traffic ControlCenter

Cell Tower

Wifi Antenna

Industrial

City / Metro

FTTH Architecture

Residential Homes

Residential Homes

Underground

Wind Farm

Aerial

Residential MDUs

Campus/Business Parks

Applications

� Fibre to the Home (FTTh)

� Multiple Dwelling Units (MDUs)

� In Building

� Campus (University, Hospital, Military)

� Business Park/Industrial

� City/Metropolitan

� Long-Distance

� Telemetry and Intelligent Transport systems

- Rail, motorways, wind farms, oil/gas pipelines,

� Fibre to the Cabinet (FTTc)

� Mobile Phone Mast Connections

� 5G & Wifi Antennas & Smart Cities

� Overhead

� Cable TV

� Security

utilities, housing projects


FTTxMicroducting

Microducting

Infrastructure

Fibre To The Cabinet

Fibre To The Curb

Networks

Access Chambers

FTTN

TWINWALL

TECHNOLOGY

MiniGlide

Radius Systems

Matrix® Closures

MicroGlideFibre To The Building

Connectors

Broadband

Sub-Duct

Fibre

TelecomsFTTC

FTTB

FTTC


Installation Methods

Existing Ducts (Direct Install)• Installation into existing ducts• Individual tubes or single sheath bundles

Direct Bury/Trenching• Install directly into the ground, where

there are no ducted networks• Heavy sheath construction• Ducting offers protection from weather,

temperature changes, impact and physical damage

Trenching/Slot-Cutting

Narrow Trenching

• Narrow trenches are cut at shallow depth in an existing roadway

• Minimal disruption• Restored with minimum renovation• Road construction strength retained

• Narrow trenches are cut at shallow depth in an existing roadway

• Minimal disruption• Restored with minimum renovation• Road construction strength retained

There are several ways to install an FTTx network dependent on the environment in which you are deploying. We have systems to suit each installation method.


Mole Ploughing • Specialist machines dig the trench

and lay the duct in one operation• Special heavy duty tube assemblies

Aerial/Semi Aerial• Catenary constructions, figure of 8• Poles & facade applications• Weathering and UV resistance

• Horizontal Directional Drilling (HDD)

• Trenchless Solutions• Quick and cost effective• Environmentally friendly

Impact Moling

No Dig Solutions: Sewers/Tunnels/Waterway

• Install into existing infrastructure typically 60% faster than other installation methods

• Little traffic/pedestrian disruption

FTTx is becoming a necessity to meet the demands of todays high speed, high data volume market requirements. Home and commerical demands are ever increasing with bandwidth requirements of the customer benchmarked against the fastest speeds available. Radius offers an extensive range of FTTx solutions to top operators, integrators and installation professionals that seek to deploy fibre to their customers.

Modular tubing infrastructure is based on small diameter tubes supplied loose or bundled in cable-like assemblies to suit different applications and cable sizes. Flexible multi-tube systems allow for future expansion without the initial fibre outlay, as each tube is populated when required by blowing in fibre mini-cable or blown fibre units, leaving empty tubes to satisfy further demand.

We offer two standard microtubing systems; MiniGlide™, based on 7 to 20mm tubes, and MicroGlide™, based on 3 to 6mm tubes. Designed for scalable and economic installation, our microducting systems enable rapid and simple fibre deployment from trunk networks through to the end user.

Radius pipe systems are accredited to the following Quality Management Systems:

BS EN ISO 9001:2015 | BS EN ISO 14001:2004

Radius products are manufactured and tested to international and customer standards.Certificate No. EMS 507229 Certificate No. FMS 507228 KM 62102



Specifically designed for FTTx networks and tailored to customer requirements


Microducting Systems Benefits

• Deferred capital cost

• No need to guess future fibre requirements

• Maximised network capacity

• Rapid installation and short response time

• Flexible network expansion, connection and upgrade

• Fast and easy branching-off

• Point to point fibre connections

• Limited splicing

• Reduced engineering costs

• Mid-span access at any location, at any time

• No disruption to live fibre

Class Leading Low Friction Properties

All our MiniglideTM and MicroglideTM products feature a specially engineered solid layer of lubricant evenly distributed on the inner wall by co-extrusion. This provides a permanent low friction surface for the life of the duct.

Radius products offer excellent low friction val-ues allowing long installation lengths of delicate fibre optic cable by pulling or blowing.

• HDPE• Solid Lubricant Layer• Cable

• Direct Bury

• Direct Install

• Metallic

• Non-Metallic

Outdoor Installations

• Low Fire Hazard

• Low Smoke Zero Halogen (LSZH) - IFH

• Intermediate fire hazard and general fire resistance

Indoor Installations

Your choice of configuration, tube, sheath colours and print line and packaging

Product Customisation

• Aerial

• Armoured

• Anti-termite

• Anti-Rodent

• Chemical Resistant

Special Assemblies


Standard Low Friction Tubing Configurations

Our tubing can be bundled in assemblies from 1 to 24-way. Individual microducts are available with ribbed or smooth bore as required. Assemblies are available in a variety of sheathing options suitable for Direct Install, Direct Bury or Fire Retardant (LSZH) applications and can be customised to meet specific environmental challenges.

..................................................................................................................................

..................................................................................................................................

The above shows typical 1 - 24 way configurations and is for illustration only. Other colours including DIN VDE 888 colour coding,

EIA598 colour configuration and sheathing options are available.

..................................................................................................................................

..................................................................................................................................

Tubing Configuration

Direct Bury/Direct Install

In Building (LSZH)

Direct Bury

The Radius Miniglide system is manufactured in accordance with the requirements of Germany’s Standard Material Concept for

governmental funding of broadband network builds.

The above shows typical 1 - 24 way configurations and is for illustration only. Other colours and sheathing options are available.

Thick Wall Drum Length (m)


FTTx Microduct/Primary Tube

HDPE LOW FRICTION TUBES

Colours

AQYEORRDBRBLGR GN BE PU PI WH

• U.V Stabilisation

• Pre-roping / Pre-Taping

• Pre-Cabling

Options

• Permanent low friction inner standard

coating for enhanced blowing performance

• Supplied as single tubes or assemblies

• Polyethylene (PE) Microducts

• Excellent stress crack and stress crush

resistance

• Available with smooth or ribbed inner wall

• Solid and translucent colours. Striped

option available.

Standard Wall Drum Length (m)

OD/ID (mm) 500 1000 2000 2500 4000 5000

4/2.1 • • • •5/2.1 • • • •5/2.5 • • • •6/2.7 • • • •7/3.5 • • • • •7/4 • • • • •

8/3.5 • • • • •8/4 • • • •8/5 • • • •10/6 • • • •12/8 • • •14/10 • • •16/10 • • •16/12 • • •18/12 • • •18/14 • • •20/14 • • •20/15 • • •20/16 • • •

*Datasheets and other sizes available on request ODs/IDs. Other drum lengths available on request.

OD/ID (mm) 500 1000 2000 2500 4000 5000

3/2.1 • •4/2.7 • • • •5/3.5 • • • •6/3.5 • • • •6/4 • • • • •

7/5.5 • • • • •8/6 • • • •10/8 • • • •12/9 • • •12/10 • • •14/11 • • •14/12 • • •

Features


LOW FIRE HAZARD TUBES

• Fire retardant and halogen free microducts designed to meet the requirements of IEC 60332-3 and IEC 60332-1

• Permanent low friction inner coating for enhanced blowing performance• Smooth or ribbed inner wall• Solid white colour as standard• Can be also be supplied pre-taped or pre-roped

Standard Wall Drum Length (m)

OD/ID (mm) 500 1000 2000 4000

3/2.1 • •5/2.1 • • • •5/2.5 • • • •5/3.5 • • • •7/4 • • • •

7/5.5 • • • •8/5.5 • • •8/6 • • •10/6 • • •10/8 • • •12/8 • • •

12/9.6 • • •14/10 • • •16/12 • • •20/16 • • •

*Datasheets and other sizes available on request ODs/IDs. Other drum lengths available on request.

FTTx Microduct/Primary Tube


Direct Bury Assemblies

Tube OD/ID Configuration Assembly Drum Length (m)

DIRECT BURY METAL FREE

• Simple and robust assemblies• Can be installed directly into prepared ground• Made from heavy duty crush resistant thick walled tubes • Thin outer PE or PP sheath, holds the bundle together• Suitable for slot cut installation, micro & narrow trenching

*Datasheets available on request

*Other sizes and configurations available on request

ID (mm) # of Tubes OD (mm)* 1000 2000

4/2.1

2 9.4 x 5.4 • •4 11.1 x 9.4 • •7 13.4 x 12.3 • •12 17.6 x 15.8 • •19 19.3 x 21.4 • •19 R 21.4 • •24 19.3 x 25.4 • •24+1 25.4 • •

7/4

2 15.4x 8.4 • •4 18.3 x 15.4 • •7 22.4 x 20.5 • •12 29.8 x 26.6 • •19 36.4 x 26.6 • •19 R 36.4 • •24 43.4 x 32.7 • •24+1 43.4 • •

10/6

2 21.5 x 11.5 • •3 20.2 x 21.5 • •4 21.5 x 25.6 • •7 31.5 x 28.8 • •8 46.5 x 20.16 • •12 41.5 x 37.5 • •14 46.5 x 37.5 • •24 61.5 x 46.1 • •24R 60.2 • •

12/8

1 13.5 • •2 25.5 x 13.5 • •3 25.5 x 23.9 • •4 30.5 x 25.5 • •5 32.9 x 31.9 • •7 37.5 x 34.3 • •

14/10

1 15.5 • •2 29.5 x 15.5 • •3 29.5 x 27.6 • •4 35.3 x 29.5 • •5 43.5 x 27.6 • •6 42.1 x 40.8 • •7 43.5 x 39.8 • 1500

14/11

2 29.5 x 15.5 • •3 29.5 x 27.6 • •4 35.3 x 29.5 • •6 42.1 x 40.8 • •7 43.5 x 39.8 • 1500

16/10

2 33.5 x 17.5 • •3 33.5 x 31.4 • •4 40.2 x 33.5 • •7 49.5 x 45.2 •

16/12

2 33.5 x 17.5 • •3 33.5 x 31.4 • •4 40.2 x 33.5 • •7 49.5 x 45.2 •

(GROUND)

15



(mm) # of Tubes OD (mm)* 1000 2000

18/122 37.5 x 19.5 • •3 35.1 x 37.5 • •4 37.5 x 45.0 • •

18/14

2 37.5 x 19.5 • •4 37.5 x 45.0 • •7 55.5 x 50.7 • •8 55.5 x 53.1 • •

20/142 41.5 x 21.5 • •3 41.5 x 38.8 • •4 49.8 x 41.5 • •

20/152 41.5 x 21.5 • •3 41.5 x 38.8 • •4 49.8 x 41.5 •


The Radius Miniglide system is manufactured in accordance with

the requirements of Germany’s Standard Material Concept for

governmental funding of broadband network builds.

DIRECT BURY METAL FREE (GROUND)

16

OD/ID (mm) Configuration Assembly Drum Length (m)

(mm) # of Tubes OD (mm)* 500 1000 2000

7/412 33.4 x 39.4 • • •24 47.7 • •

14/10

1 21.5 • • •2 35.5 x 21.5 • • •3 37.7 • • •4 41.3 • • •5 45.3 • •6 49.5 • •7 49.5 • •

16/12

1 22.0 • • •2 38.0 x 22.0 • • •3 38.0 x 35.8 • • •4 38.0 x 44.6 • • •5 54.0 x 35.8 • •6 49.7 x 46.0 • •7 54.0 x 49.7 • •

MOLE PLOUGHING MICROTRENCHING / SLOT CUTTING


• We offer a range of very robust ducts, microducts and assemblies. Suitable for mole ploughing installation, particularly suited to rural broadband applications.

• Slimline assemblies designed for use in narrow width trenches

(mm) # of Tubes OD (mm)* 500 1000 2000

10/6 8 10.0 x 10.1 • • •

20/153 61.6 x 21.6 • • •4 21.5 x 82.3 • • •5 113.9 x 21.3 • • •

16/12

2 33.5 x 17.5 • • •3 33.5 x 31.4 • • •4 40.2 x 33.5 • • •7 49.5 x 45.2 • •

(mm) # of Tubes OD (mm)* 500 1000 2000

5/3.5

1 10.0 • • •2 17.0 x 12.0 • • •4 19.7 • • •7 22.6 • • •12 27.9 • • •19 32.6 • • •24+1 37.6 • • •

10/8

1 19.8 • • •2 29.8 x 19.8 • • •4 33.9 • • •7 39.8 • • •

12/10

1 19.0 • • •2 31.0 x 19.0 • • •3 34.4 • • •4 37.6 • • •7 45.5 • • •



DIRECT BURY METAL FREETube OD/ID Configuration Assembly Drum Length (m)

• Can be installed into prepared ground where a non-metallic solution is required (such as an area with a risk of lightning)

• Heavy/Dual PE sheath for maximum crush resistance• Optional non-metallic moisture barrier (water blocking

tape)• Integral ripcord for easy sheath removal

* Supplied as standard without water blocking tape, this is available on request.




DIRECT BURY ALUMINIUM

• Can be installed directly into prepared ground• Heavy/Dual PE sheath for maximum crush resistance• Maximum moisture protection provided by a 150µm layer of

aluminium • Integral ripcord for easy sheath removal• Can be installed directly into prepared ground• Heavy/Dual PE sheath for maximum crush resistance• Also available with tracer wire


(mm) # of Tubes OD (mm)* 500 1000 2000

5/3.5

1 11.9 • • •2 16.9 x 11.9 • • •4 19 • • •7 22.5 • • •12 29.9 • • •19 34.7 • • •24 39.7 • • •

10/8

1 18.0 • • •2 28.0 x 18.0 • • •4 33.9 x 29.7 • • •7 39.7 x 37.0 • • •

12/10

1 20.0 • • •2 32.0 x 20.0 • • •4 38.6 x 33.6 • • •7 45.6 x 42.4 • •


HYBRID ASSEMBLIES

Radius understands that no two projects are the same and we offer bespoke solutions to suit your particular project requirements including hybrid assemblies comprising of microducts of various diameters.


Direct Install Assemblies

DIRECT INSTALL METAL FREE

* Supplied as standard without water blocking tape, this is available on request

• Can be installed directly into a duct or sub-duct where a non-metallic solution is required (such as an area with a risk of lightning)

• Non-metallic moisture barrier provided (Water blocking tape)• Light PE sheath• Integral ripcord for easy sheath removal• Also available with tracer wire*Datasheets available on request

(mm) # of Tubes OD (mm)* 500 1000 2000

5/3.5

1 8.7 • • •2 13.7 x 8.7 • • •4 15.8 • • •7 18.7 • • •12 24.7 • • •19 29.5 • • •24 34.5 • • •

10/8

1 18.0 • • •2 28.0 x 18.0 • • •3 23.2 x 21.8 • • •4 27.3 x 23.2 • • •7 33.4 x 30.7 • • •

12/10

1 15.9 • • •2 27.9 x 15.9 • • •3 27.9 x 26.3 • • •4 32.9 x 27.9 • • •7 40.4 x 37.2 • • •


(PIPE IN PIPE)


Direct Install Assemblies

• Can be installed directly into a duct or sub-duct• Light PE sheath• Maximum moisture protection provided by a 150µm of layer of

aluminium• Integral ripcord for easy sheath removal*Datasheets available on request

DIRECT INSTALL ALUMINIUM

(mm) # of Tubes OD (mm)* 500 1000 2000

5/3.5

1 8.7 • • •2 13.7 x 8.7 • • •4 15.7 • • •7 18.7 • • •12 23.9 • • •19 28.7 • • •24 33.7 • • •

10/8

1 13.7 • • •2 23.7 x 13.7 • • •3 22.4 x 23.7 • • •4 27.8 x 23.7 • • •7 33.7 x 31.0 • • •

12/10

1 15.7 • • •2 27.7 x 15.7 • • •3 27.7 x 26.1 • • •4 32.6 x 27.7 • • •7 39.7 x 36.5 • • •


(PIPE IN PIPE)

With many years of serving the telecoms market, we know that there are times when you need special tube constructions

to meet your network requirements. We pride ourselves on providing tailored solutions and our expert development

engineers enjoy devising special application products to meet your needs.

“ “

22


Indoor Assemblies

LOW FIRE HAZARD (LFH)Tube OD/ID Configuration Assembly

These assemblies are suitable for indoor applications offering varying levels of protection against fire and low smoke and zero halogen emissions

• Low Smoke Zero Halogen (LSZH) sheath and primary tubes• For use inside buildings• Low flammability, low smoke and zero halogen emissions• Designed to meet the requirements of IEC 60332-3 and IEC

60332-1


Drum Length (m)

(mm) # of Tubes OD (mm)* 500 1000 2000

3/2.1

1 4.2 • • •2 1.2 x 7.2 • • •4 7.2 x 8.4 • • •7 9.4 x 10.2 • • •12 12 x 13.3 • • •19 14.6 x 16.2 • • •24 14.6 x 19.2 • • •

5/3.5

1 6.9 • • •2 12.0 x 7.0 • • •4 14.1 x 12.0 • • •7 17.0 x 15x7 • • •12 22.4 x 20.1 • • •19 27.0 x24.3 • • •24 32.0 x31.8 • • •

10/8

1 13.7 • • •2 23.7 x 13.7 • • •4 27.8 x 23.7 • • •7 33.7 x 31.0 • • •

12/9.6

1 13.8 • • •2 25.8 x 13.8 • • •4 30.8 x 25.8 • • •7 37.8 x 34.6 • • •

16/12

1 13.7 • • •2 23.7 x 13.7 • • •4 27.8 x 23.7 • • •7 33.7 x 31.0 • • •

20/162 43.0 x 23.0 • • •3 43.0 x 40.3 • • •4 43.0 x 51.3 • •


Indoor Assemblies


• LSZH sheath and PE primary tubes• For use inside buildings • Improved fire performance compared with all-PE products • Designed to minimise the evolution of smoke and corrosive

gases • Designed to meet performance requirements of IEC 60332-1


(mm) # of Tubes OD (mm)* 500 1000 2000

3/2.1

1 4.2 • • •2 4.2 x 7.2 • • •4 7.2 x 8.4 • • •7 9.4 x 10.2 • • •12 12 x 13.3 • • •19 14.6 x 16.2 • • •24 14.6 x 19.2 • • •

5/3.5

1 6.9 • • •2 12.0 x 7.0 • • •4 14.1 x 12.0 • • •7 17.0 x 15.7 • • •12 22.4 x20.1 • • •19 27.0 x 24.3 • • •24 32.0 x 31.8 • • •

10/8

1 12.0 • • •2 22.0 x 12.0 • • •4 26.1 x 22.0 • • •7 32.0 x 29.3 • • •

12/10

1 14.2 • • •2 26.2 x 14.1 • • •4 31.2 x 26.2 • • •7 38.2 x 35.0 • • •

GENERAL FLAMMABILITY RESISTANCE


Indoor Assemblies

RISER RATEDTube OD/ID Configuration Assembly

GENERAL FLAMMABILITY RESISTANCETube OD/ID Configuration Assembly

• PVC sheath and PE primary tubes • For use inside buildings • Provides a basic level of fire protection for general purpose

applications • Meets IEC 60332-1


• For use as riser tubing in buildings• Approved to RISER UL 1666 and CUL 1666 by

Underwriter Laboratories


Drum Length (m)

Drum Length (m)

(mm) # of Tubes OD (mm)* 500 1000 2000

5/3.5mm

1 7.5 • • •2 12.5 x 7.5 • • •4 15.5 • • •7 18.5 • • •

(mm) # of Tubes OD (mm)* 500 1000 2000

5/3.5mm

1 6.9 • • •2 11.9 x 6.9 • • •4 14.0 x 11.9 • • •7 16.9 x 15.6 • • •12 22.2 x 19.9 • • •19 26.9 x 24.2 • • •24 31.9 x 31.6 • • •


Aerial

• Fast point to point installation• Light weight construction • Small diameter, low visual impact• UV stabilised• Compatible with underground microtubing systems• Metallic and metal free ADSS


AERIAL FIGURE 8

ADSS DROP TUBE

• Single tube configuration for pre-mix drop• Available in metal free version with GRP strength

members • UV Stabilisation• Suitable for outdoor storage• Stress Crack resistant



(mm) # of Tubes OD (mm)* 500 1000 2000

16/12 1 21x30 • • •18/14 1 23x32 • • •28/24 1 33x42 • • •

Specials

ANTI RODENT (DIRECT BURY)

• Anti-rodent constructions are available to suit user requirements, using combinations of glass fibres, armour or rodent repellent additive as required

• Customised sizes and assemblies on request *Datasheets available on request

Custom Specials assemblies available on request


ARMOURED (DIRECT BURY)ARMOURED (DIRECT BURY)

• Armoured assembly, low friction tube surrounded with a corrugated steel armoured layer and an outer HDPE sheath.Suitable for direct burial, heavy duty and anti-rodent applications.


Specials

ANTI-TERMITE (DIRECT BURY)

• For use where termites are problematic • Nylon layer provides protection against attack by termites*Datasheets available on request

• For use in environments at risk of chemical contact• Maximum chemical resistance is provided through four

layers of protection; an initial aluminium layer, an inner PE sheath, a chemical resistant layer and an outer PE sheath


FILLED BUNDLE

• A range of metal free microduct assemblies, a filling between the interstices of the tubes in an extremely strong construction with very good concentricity


DIRECT BURY CHEMICAL RESISTANT


Connectors are available in a range of sizes for 3 to 20mm microduct outer diameters (OD). Other

push-fit connectors such as close down assemblies and bulkhead connectors are available on request.

FTTx Connectors and Sealing


Our easy to use range of Push-Fit Connectors and

Sealing Systems are the perfect complement to

our MiniGlide and MicroGlide tubing

DIRECT BURY CONNECTOR

• A tough straight connector suitable for direct buried jointing of thick walled microtubes

• Locking clips optional• Push fit connection


Tube OD (mm) Tube ID (mm) Pack Qty

5 2.1 25

7 3.5 25

7 4 25

8 5 25

10 5.5 25

10 6 25

12 6 2514 10 2516 12 25

18 14 25



DIRECT BURY END STOP

• A tough end stop for sealing the end of direct buried thick walled microtubes


Tube OD (mm) Pack Qty

3 25

4 25

5 25

7 25

8 25

8.5 25

10 25

12 25

12.7 25

14 25

15 25

16 25

18 25

DIRECT BURY CONNECTOR/END STOPTube OD/ID (mm) Pack Qty

Straight Connector

7/4 10

7/3.5 10

8/4 10

14 10

DIRECT BURY CONNECTOR/ END STOP

• Suitable for direct buried applications.• Push fit connection• Direct buried application*Datasheets and other sizes available on request


End Stop

7 10

8 10

14 10


Straight Connector

7x7 10

8x8 10

10x10 10

12x12 10

14x14 10

16x16 10

20x20 10

• Suitable for direct buried applications• Transparent body• Corrosion resistant• Push fit connection• Air and water tight*Datasheets and other sizes available on request


End Stop

7 10

8 10

10 10

12 10

14 10

16 10

20 10


3 10

4 10

5 10

7 10

8 10

10 10

12 10

14 10

16 10


END STOP

• For sealing the end of an open microtube*Datasheets available on request


STRAIGHT CONNECTOR

NOTE: Product photos are for illustration only, product/colours may vary.


Tube OD (mm) Tube ID (mm) Pack Qty

3 2.1 10

4 2.5 10

5 3.5 10

5 2.1 10

7 5.5 10

7 3.5 10

8 6 10

8 3.5 10

10 8 10

14 12 10

14 10 10

16 10 10

16 12 10

18 14 10

REDUCERMicroduct A Pack Qty

• For joining microtubes of different outer diameters*Datasheets available on request

Microduct BTube OD (mm)

Tube OD (mm)

7 4 10

7 5 10

8 4 10

8 5 108 6 1010 4 10

10 5 10

10/8 6/4.5 10

10/6 6/3.5 1010 7 1010 8 10

12 5 10

12 7 10

12 8 10

12 10 10

14/12 10 10

14/10 12 10

14/12 7/5.5 1014/10 7/5.5 1014 12 10

16 12 10

16/12 14/10 10

16/12 14/12 10

Microduct A Pack QtyMicroduct BTube OD (mm)

Tube OD (mm)

4 3 10

5 3 105 4 10

6 4 10

7 3 10

7 4 10



7 1-4 10

7 2-5.5 10

8 1-4 10

8 3-6 10

10 1-4 10

10 3-6 10

10 5-8 10

12 3-6 10

12 5-8 10

12 7-10 10

14 3-6 10

14 7-10 10

14 5-8 10

14 9-12 10

16 3-6 10

16 5-8 10

16 7-10 10

20 3-6 10

20 5-8 10

20 7-10 10

20 9-12 10

O.D Nominal Duct (mm) Cable 0D Range (mm) Pack Qty

3 0.5-2.1 10

4 0.5-3 10

5 0.5-3.5 10

6 1-4 10

GAS BLOCK CONNECTOR

GAS BLOCK END STOP

• Provides a watertight and gastight seal for the end of a microtube• Tube to cable seal• Caters for various cable diameters

O.D Nominal Duct (mm) Cable 0D Range (mm) Pack Qty

4 Fibre Unit 10

5 Fibre Unit 10

6 1-4 10

7 1-3.8 10

7 2-5.5 10

8 0.5-3.5 10

8 3-6 10

10 1-4 10

10 3-6 10

10 5-8 10

12 3-6 10

12 5-8 10

12 7-10 10

14 3-6 10

14 5-8 10

14 7-10 10

14 9-12 10

16 3-6 10

16 5-8 10

16 7-10 10

16 9-12 10

• Provides a watertight and gastight seal for connecting microtubes

• Tube to cable seal• Caters for various cable diameters*Datasheets available on request

Tubes can be connected in a straight line or branch-off using Push-Fit Connectors and fibre can then be blown in, as required, through to the end user without interruption/splicing.

Assembly is very simple with no tools required. The assembly can be supplied with all components in place. Matrix2 closures consist of two halves which should be fitted around the connection area. The closure is then sealed by sliding on the side clasps and manually tightening the retrofittable endcaps. Cable ties are provided for each port as a temporary aid to maintain the bottom half in place during installation.

Features

• Can be installed in an Access Chamber or

buried directly into the ground

• Can be retrofitted and reused

• Easy to install and no tools are required

• Matrix2 IP68

• Fast & easy, no tools

• Cost Effective

• Operator Friendly

• Excellent Leak Performance

MatrixTM Joint Closures


Benefits

Protective joint closures enable point-to-point tube connections

34


IN LINE CLOSURE MATRIX2

T BRANCH JOINT CLOSURE

• Inserts are available to fit various cable/duct ODs*Datasheets available on request

For Tube OD (mm) Pack Qty

50-50-50 25

50-50-40 25

50-50-32 25

50-50-25 25

40-40-40 25

40-40-32 25

40-40-25 25

Duct Construction Pack Qty

32mm Duct 15

40mm Duct 15

50mm Duct 15

12x5/3.5mm Assembly 15

24x5/3.5 DB Assembly with Aluminium 15

24x5/3.5 DB Assembly with Water Tape 15

3x14/10mm Assembly 15




3x14 Primary Tubes 15


12x1 way 5/3.5mm 15


32mm Duct 30

40mm Duct 30

50mm Duct 30







IN LINE CLOSURE MATRIX

IP68

IP54

IP54


IN LINE CLOSURE MATRIX2

T BRANCH JOINT CLOSURE

• Sealing sets contain: 1 x Port Seal, 2 x Port Inserts and 2 x Grip Rings (if applicable).


IN LINE CLOSURE MATRIX

35

Text Header


MatrixTM Joint Closures

36

H BRANCH CLOSURE MATRIX2

• Sealing sets contain: 1 x Port Seal, 2 x Port Inserts and 2 x Grip Rings (if applicable). *Datasheets available on request


32mm Duct 7

40mm Duct 7

50mm Duct 7










12x1 way 5/3.5mm 7

IP68

H BRANCH CLOSURE MATRIX2

CABLE LOOP BOX

BENEFITS� Protects excess cable or duct from damage

� Capable of storing approx 50m of cable (based on 9mm OD)

� Rodent resistant design with sealed entries

� Total of four cable entries for various options of duct input and output

� Uses the same wide range of seals as Radius Matrix2 tube clo-sures

� Retrofittable, can be installed any time, any place

� Ergonomic design for ease of access

� Cable diameter limiting centre core to prevent microbending

The Cable Loop Box provides safe storage for excess cable and/

or ducting. It can be easily mounted to a chamber wall:

� Simply use screws for preformed plastic chambers such as our

Radbox® & Quadbox® � Use screws and wall anchors for concrete or brick chambers.

The ducting can be inserted into the specified seals and the cable

then installed around the central core of the Cable Loop Box.

Contact us for a detailed datasheet

External Dimensions 560x560mm

Internal Dimensions 494x494mm

Effective Core Diameter 300mm

Weight 3.6kg

Port sizes 4 x 50mm ports which can be adapted to size with inserts to suit requirements e.g. 40mm, 32mm, 25mm and special sizes on applications.

Seals Wide range available, specials on application

Text Header


MicroglideTM TubingFTTx Sealing Systems

DIVISIBLE DUCT SEAL

Suitable for gas and watertight sealing of HDPE ducts, which contain mini/micro ducts and/or (fibre optic) cables. The modular system enables easy installation of various cable and duct configurations. The system is divisible and can be retrofitted. Rubber inserts can be custom designed for your specific needs and configuration and will contain (temporary) blind plugs to make the system more flexible at the installation site.

• Gas and water tight up to 0.25 bar• Suitable for retrofitting• Easy installation• Slim design• Includes cores of the recesses


*0.5 can be acheived, please contact us

Duct OD (mm) Configuration (mm) Pack Qty

256x4 20

1x12 20

1x12-7 20

32

2x7 + 1x12 20

1x10 +3x7 20

7x7 20

1x12 + 1x10 + 1x7.5 20

3x10 20

4x10 20

2x10 + 1C8-14 20

3x12 20

1x14 20

40

24x4 10

2x7 + 1x12 10

10x7 10

1x10 + 3x7 10

8x7 - 1x12 10

5x10 10

7x10 10

3x10 - 1C8-18 10

4X12 10

2x12 +1C8-18 10

3x14 10

2x15 + 2x8, 4-13, 4 10

50

4x16 10

5x12 + 1C8-18, 5mm 10

5x10 + 1C8-18, 5mm 10

7x7 + 1C8-18, 5mm 10

7x14 10

7x10 10

7x12 10

8x7 + 1x14 10

8x7 + 1x16 10

8x10 10

9x10 10

10x7 +1x12 10

12x7 - 1x14 10

1x15, 5 + 3x12 10

18x7 10

63

24x7 10

24x7 + 1x14 10

22x7 + 1x12 10

15x10 10

9x12 10

12x12 10

7x14 10

6x16 10

37

Text Header


FTTx Sealing Systems

RETROFITTABLE GAS SEAL

• Suitable for retrofitting

• Easy installation

• Slim design

• Sealing: up to 0.5 bar

• Mechanical Compression Strength: ≥ 1000N, 10 sec.


Duct OD (mm) Cable/tubeOD (mm) Pack Qty

10

1.5-2.5 25

2.5-3.5 25

3.5-5.0 25

5.0-6.5 25

6.5-7.5 25

12

1.5-2.5 25

2.5-3.5 25

3.5-5.0 25

5.0-6.5 25

6.5-8.0 25

7.0-8.5 25

14

1.5-2.5 25

2.5-3.5 25

3.5-5.0 25

5.0-6.5 25

6.5-8.0 25

8.0-10.0 25

16

1.5-2.5 25

2.5-3.5 25

3.5-5.0 25

5.0-6.5 25

6.5-8.0 25

8.0-10.0 25

18

3.5-5.0 25

5.0-6.5 25

6.5-8.0 25

8.0-9.5 25

9.4-12.0 25

20

3.5-5.0 25

5.0-6.5 25

6.5-8.0 25

8.0-10.0 25

9.4-12.0 25

38

Text Header


MicroglideTM TubingFTTx Sealing Systems

RETROFITTABLE GAS SEAL

• Gas and Water tight up to 0.5 bar• Suitable for retro fitting• Easy installation• No need to slide the seal over the glass fibre for

installation• Slim design• Other versions available upon request suitable

for retrofitting*Datasheets available on request

• Flexible, durable PVC cap• Suitable as temporary seal for microtubes• Various colours available• Various sizes available ranging from 2mm to

100mm ID

Duct OD (mm) Cable/tubeOD (mm) Pack Qty

40.9 100

1.25 100

1.6 100

2.1 100

5

0.9 100

1.25 100

1.6 100

2.1 100

2.5 100

6

0.9 100

1.25 100

1.6 100

2.1 100

2.5 100

7

0.9 100

1.25 100

1.6 100

2.1 100

2.5 100

8

0.9 100

1.25 100

1.65 100

2.1 100

2.5 100

FLEXIBLE END CAP

39

Text Header



4-14mm 1

Spare Blade 1

FTTx Tools

SHEATH STRIPPER

TUBE CUTTER

HEAVY DUTY CUTTER LONGITUDINAL CUTTER 1A

• Circular, longitudinal and spiral cutting

• Adjustable depth, high speed steel blade

• Circular and longitudinal cutting

• Adjustable depth, replaceable steel blade

• 4 way cam for different thicknesses

• Shoe for small cables, reversible blade


15-60mm 1


6-40mm 1

Spare Blade 1

Description Pack Qty

Longitudinal Cutter 1

Spare Blade 1

MEDIUM DUCT CUTTER LARGE DUCT CUTTERFor Tube OD (mm) Pack Qty

4-42mm 1


4-63mm 1

40


FTTx Tools

BLOWING BALLSBLOWING SPONGES

• Available in various sizes • General purpose polyamide 66 resin

• Available in various sizes

CUTTER FOR OCCUPIED TUBE

ROUNDING TOOL ROUNDING TOOL

• Used to round inner tube edges

• Used to round inner tube edges

• For cutting individual tubes (3-14mm) which

are occupied by cable.

41

For Tube ID (mm) Pack Qty

2.1mm 4

3.5mm 4

8mm 4

For Tube iD (mm) Pack Qty

10-26 1

In complement to our FTTx Infrastructure range, Radius manufacture high quality preformed access chambers for use in utilities and civil engineering applications.

We offer two types of chambers: Quadbox®, a stackable ring system and Radbox®, a fully modular system built from panels and corner pieces. Our products are extremely flexible and are suited to many markets and applications and are sold worldwide.

Extremely robust, they provide the ideal alternative for concrete and brick-built chambers enabling fast, easy and cost effective installation.

Applications

• Telecommunications

• Power & Energy

• Water

• Gas

• Highways

• Street Lighting / Traffic Signalling

• Rail

Access Chambers“Delivering world class infrastructure systems since 1988”


Access Chamber Systems

42

TECHNICAL FEATURES� Up to EN124 Class D400*

� Double wall construction using High Density Polyethylene (HDPE) based on structural foam moulding technology

� Stress free mouldings with excellent long-term performance and chemical resistance

� Free draining

� Immediate load-bearing strength

� Smooth outer wall with lip to lock into backfill

� Inert material no toxic dust from cutting

� No need for concrete backfill

BENEFITS� Simple stacking system, fast & reliable

� One stop fast installation

� Minimum disruption, reduced traffic management and install costs

� Robust & lightweight

� Excellent vertical & sidewall stiffness

� Generous overlap between sections for maximum integrity

� Suitable for use in congested networks

� Duct entry drill guides, highly adaptable

� Easy fit drop-in furniture *Refer to our individual datasheets for more details


Access Chamber Systems

43

RADBOX®

Radbox® is a high performance, preformed underground access chamber for all types of buried networks and utilities.

Radbox® is a modular system comprising of wall panels and corner pieces, which fit together to provide a wide range of chamber sizes.

The chamber is delivered as a compact lightweight flat-pack consisting of easily assembled components. It can also be supplied pre-built, if requested.

Quadbox® is a robust preformed underground access chamber system for use in all types of buried networks and utilities.

The Quadbox® system comprises of 150mm height stackable rings, which interlock to build variable depths. It is especially suitable for use in congested networks.

Approved

725X255mm

BT 102

Available in 5 sizes:

915X445mm

BT 104

1310X610mm

BT 106

600X450mm300X300mm

See our Access Chambers brochure for more details.

Dimensions - Clear Openings

Single Panels (mm) 450 600 750 900 1050

Extended Panels (mm) 825 975 1125 1200 1275 1350 1425 1500 1575 1650

1725 1800 1875 1950 2025

2-Panel Combination 3-Panel Combination

QUADBOX®

Modular heightComponents are available in a choice of 500mm and 150mm height. Sections of

either height can be stacked in any combination to achieve the desired depth.

Up to

40t

Up to

40t

Terms and Conditions of Sale

1. DEFINITION“the Company” shall mean Radius Plastics Limited;“the Purchaser” shall mean the person(s), firm or company who purchases the Goods from the Company;“Contract” shall mean any contract between the Company and the Purchaser for the sale and purchase of the Goods incorporating these Conditions;“Contract Price” shall mean the total price for the Goods to be supplied under the Con-tract;“Goods” shall mean any goods agreed in the Contract to be supplied to the Purchaser by the Company (including any part or parts of them).

2. APPLICATION OF TERMS2.1 Subject to any variation under condition 2.3 the Contract will be on these Conditions

to the exclusion of all other terms and conditions (including any terms or conditions which the Purchaser purports to apply under any purchase order, confirmation of order, specification or other document).

2.2 No terms or conditions endorsed upon, delivered with or contained in the Purchaser’s purchase order, confirmation of order, specification or other document will form part of the Contract simply as a result of such document being referred to in the Contract.

2.3 These Conditions apply to all the Company’s sales and any variation to these Conditions and any representations about the Goods shall have no effect unless expressly agreed in writing and signed by an authorised representative of the Company. Nothing in this Condition will exclude or limit the Company’s liability for fraudulent misrepresentation.

2.4 Each order for Goods by the Purchaser from the Company shall be deemed to be an offer by the Purchaser to purchase Goods subject to these Conditions

2.5 No order placed by the Purchaser shall be deemed to be accepted by the Company until a written acknowledgement of order is issued by the Company or (if earlier) the Company delivers the Goods to the Purchaser.

2.6 The Purchaser must ensure that the terms of its order and any applicable specification are complete and accurate.

Any quotation is given on the basis that no contract will come into existence until the Company despatches an acknowledgement of order to the Purchaser.

2.7 Any quotation is valid for a period of 30 days only from its date, provided that the Company has not previously withdrawn it.

3. DESCRIPTION OF GOODS3.1 The description of the Goods shall be as set out in the Company’s quotation.3.2 All drawings, descriptive matter, specifications and advertising issued by the

Company and any descriptions or illustrations contained in the Company’s catalogues or brochures are issued or published for the sole purpose of giving an approximate idea of the Goods described in them. They will not form part of this Contract.

4. DELIVERY4.1 Unless otherwise agreed in writing by the Company, delivery of the Goods shall take

place at the Company’s place of business.4.2 The Purchaser will take delivery of the Goods within [14] days of the Company giving

it notice that the Goods are ready for delivery.4.3 Any dates specified by the Company for delivery of the Goods are intended to be an

estimate and time for delivery shall not be made of the essence by notice. If no dates are specified, delivery will be within a reasonable time

4.4 Subject to the other provisions of these Conditions the Company will not be liable for any direct, indirect or consequential loss (all three of which terms include, without limitation, loss of profits, loss of business, depletion of goodwill and like loss), costs, damages, charges or expenses caused directly orindirectly by any delay in the delivery of the Goods (even if caused by the Company’s negligence), nor will any delay entitle the Purchaser to terminate or rescind the Contract unless such delay exceeds [180] days.

4.5 If for any reason the Purchaser will not accept delivery of any of the Goods when they are ready for delivery, or the Company is unable to deliver the Goods on time because the Purchaser has not provided appropriate instructions, documents, licences or authorisations:

4.5.1 risk in the Goods will pass to the Purchaser (including for loss or damage caused by the Company’s negligence);4.5.2 the Goods will be deemed to have been delivered; and4.5.3 the Company may store the Goods until delivery whereupon the Purchaser will be liable for all related costs and expenses (including, without limitation, storage and insurance).

4.6 The Company shall be entitled to make deliveries by instalments. Each instalment shall be a separate agreement to which these Conditions will apply.

4.7 If the Company delivers to the Purchaser a quantity of Goods of up to [10]% more or less than the quantity accepted by the Company the Purchaser shall not be entitled to object to or reject the Goods or any of them by reason of the surplus or shortfall and shall pay for such goods at the pro rata Contract rate.

5. RISKS5.1 The Goods are at the risk of the Purchaser from the time of delivery.

6. RESERVATION OF TITLE6.1 Ownership of the Goods shall not pass to the Purchaser until the Company has

received in full (in cash or cleared funds) all sums due to it in respect of:6.1.1 the Goods; and6.1.2 all other sums which are or which become due to the Company from the Purchaser on any account

6.2 Until such time as property in the Goods passes from the Company the Purchaser shall upon request deliver up such of the Goods as have not ceased to be in existence or resold to the Company. If the Purchaser fails to do so the Company may enter upon any premises owned occupied or controlled by the Purchaser where the Goods are situated and repossess the Goods

6.3 Until ownership of the Goods has passed to the Purchaser, the Purchaser must:6.3.1 hold the Goods on a fiduciary basis as the Company’s bailee;6.3.2 store the Goods (at no cost to the Company) separately from all other goods of the Buyer or any third party in such a way that they remain readily identifiable as the Company’s property;6.3.3 not destroy, deface or obscure any identifying mark or packaging on or relating to the Goods;6.3.4 maintain the Goods in a satisfactory condition and keep them insured on the Company’s behalf for their full price against all risks to the reasonable satisfaction of the Company. On request the Purchaser shall produce the policy of insurance to the Company; and6.3.5 hold the proceeds of the insurance referred to in condition 6.2.4 on trust for the Company and not mix them with any other money,nor pay the proceeds into an overdrawn bank account.

6.4 The Purchaser may resell the Goods before ownership has passed to it solely on the following conditions:

6.4.1 any sale shall be effected in the ordinary course of the Purchaser’s business at full market value; and6.4.2 any such sale shall be a sale of the Company’s property on the Purchaser’s own behalf and the Purchaser shall deal as principal when making such a sale.

7. EVENTS OF DEFAULT7.1 The Purchaser’s right to possession of the Goods pending payment therefore shall

terminate immediately if:7.1.1 the Purchaser has a bankruptcy order made against him or makes

an arrangement or composition with his creditors, or otherwise takes the benefit of any statutory provision for the time being in force for the relief of insolvent debt or (being a body corporate) convenes a meeting of creditors (whether formal or informal), or enters into liquidation whether voluntary or compulsory) except a solvent voluntary liquidation for the purpose only of reconstruction or amalgamation, or has a receiver and/or manager, administrator or administrative receiver appointed of its undertaking or any part thereof, or documents are filed with the court for the appointment of an administrator of the Purchaser or notice of intention to appoint an administrator is given by the Purchaser or its directors or by a qualifying floating charge holder, or a resolution is passed or a petition presented to any court for the winding up of the Purchaser or for the granting of an administration order in respect of the Purchaser or any proceedings are commenced relating to the insolvency or possible insolvency of the Purchaser; or

7.1.2 the Purchaser suffers or allows any execution, whether legal or equitable, to be levied on his/its property or obtained against him/it, or fails to observe/perform any of his/its obligations under these Conditions or any other contract between the Vendor and the Purchase or is unable to pay its debts within article 103 of the Insolvency (NI) Order 1989 or the Purchaser ceases to trade; or7.1.3 the Purchaser encumbers or in any way charges any of the Goods.8. PRICE

8.1 Unless otherwise agreed by the Company in writing the price for the Goods shall be the price in effect on the date of delivery or deemed delivery.

8.2 The price for the Goods shall be exclusive of any value added tax and all costs or charges in relation to loading, unloading, carriage and insurance all of which amounts the Purchaser will pay in addition when it is due to pay for the Goods.

9. PAYMENT9.1 Payment of the price for the Goods is due on the last working day of the month

following delivery.9.2 Time for payment shall be of the essence.9.3 If the Purchaser fails to pay the Company any sum due pursuant to the Contract

the Purchaser will be liable to pay interest to theCompany on such sum from the due date for payment at the annual rate of 1.5% above the base lending rate from time to time of [the Ulster Bank], accruing on a daily basis until payment is made, whether before or after any judgment.

9.4 All payments payable to the Company under the Contract shall become due immediately upon termination of this Contractdespite any other provision.

9.5 The Purchaser shall make all payments due under the Contract without any deduction whether by way of set-off, counterclaim,discount, abatement or otherwise unless the Purchaser has a valid court order requiring an amount equal to such deduction tobe paid by the Company to the Purchaser.

10. QUALITY10.1 The Company warrants that (subject to the other provisions of these Conditions)

upon delivery the Goods will:10.1.1 be of satisfactory quality within the meaning of the Sale and Supply of Goods Act 1994; and10.1.2 be reasonably fit for any particular purpose for which the Goods are being bought if the Purchaser had made known that purpose to the Company in writing and the Company has confirmed in writing that the Goods are fit for the purpose as described by the Purchaser.

10.2 The Company shall not be liable for a breach of any of the warranties in condition 10.1 unless:

10.2.1 the Purchaser gives written notice of the defect to the Company and (if the defect is as a result of damage in transit) to the carrier, within 7 days of the date of delivery; and

10.2 The Company shall not be liable for a breach of any of the warranties in condition 10.1 unless:

10.2.1 the Purchaser gives written notice of the defect to the Company and (if the defect is as a result of damage in transit) to the carrier, within 7 days of the date of delivery; and10.2.2 the Company is given a reasonable opportunity after receiving the notice of examining such Goods and the Purchaser (if asked to do so by the Company) returns such Goods to the Company’s place of business at the Company’s cost for the examination to take place there.


10.3 The Company shall not be liable for a breach of any of the warranties in condition 10.1 if:

10.3.1 the Purchaser makes any further use of such Goods after giving such notice; or10.3.2 the defect arises because the Purchaser failed to follow the Company’s oral or written instructions as to the storage, installation, commissioning, use or maintenance of the Goods or (if there are none) good trade practice; or10.3.3 the Purchaser alters or repairs such Goods without the written consent of the Company.

10.4 Subject to conditions 10.2 and 10.3, if any of the Goods do not conform with any of the warranties in condition 10.1 the

Company shall at its option repair or replace such Goods (or the defective part) or refund the price of such Goods at the pro rata Contract rate provided that, if the Company so requests, the Purchaser shall, at the Company’s e x p e n s e , return the Goods or the part of the such Goods which is defective to the Company10.5 If the Company complies with condition 10.4 it shall have no further liability

for a breach of any of the warranties in condition 10.1 in respect of such Goods

11. CLAIMS11.1 All claims in respect of faulty goods must be submitted by the Purchaser in

writing to the Company within seven days of delivery of the Goods.11.2 All claims in respect of shortages in delivery must be notified by the

Purchaser to the Company in writing within three days of delivery.11.3 All claims in respect of non-delivery must be made in writing by the

Purchaser to the Company within ten days of receipt by the Purchaser of an invoice or advice note (whichever is the earlier) in respect of those Goods.

12. ASSIGNMENT12.1 The Purchaser shall not be entitled to assign this Contract or any part of it without

the prior written consent of the Vendor.12.2 The Company may assign this contract or any part of it to any person, firm

or company.

13. LIMITATION OF LIABILITY13.1 The following provisions set out the entire financial liability of the Company

(including any liability for the acts or omissions of its employees, agents and sub-contractors) to the Purchaser in respect of:

13.1.1 any breach of these Conditions; and13.1.2. any representation, statement or tortious act or omission including negligence arising under or in connection with this Contract.

13.2 All warranties, conditions and other terms implied by statute or common law (save for the conditions implied by section 12 of the Sale of Goods Act 1979) are, to the fullest extent permitted by law, excluded from this Contract.

13.3 Nothing in these Conditions excludes or limits the liability of the Company for death or personal injury caused by the Company’s negligence or fraudulent misrepresentation.

13.4 Subject to conditions 14.2 and 14.3:13.4.1 The Company’s total liability in contract, tort (including negligence or breach of statutory duty), misrepresentation, restitution or otherwise, arising in connection with the performance or contemplated performance of this Contract shall be limited to the Contract Price; and13.4.2 The Company shall not be liable to the Purchaser for any pure economic loss, loss of business, depletion of goodwill or otherwise, in each case whether direct, indirect or consequential, or any claims for consequential compensation whatsoever (howsoever caused) which arise out of or in connection with this Contract.

14. FORCE MAJEURE14.1 The Company reserves the right to defer the date of delivery or to cancel the

Contract or reduce the volume of the Goods ordered by the Purchaser (without liability to the Purchaser) if it is prevented from or delayed in the carrying on of its business due to circumstances beyond the reasonable control of the Company including, without limitation, acts of God, governmental actions, war or national emergency, acts of terrorism, protests, riot, civil commotion, fire, explosion, flood, epidemic, lock-outs, strikes or other labour disputes (whether or not relating to either party’s workforce), or restraints or delays affecting carriers or inability or delay in obtaining supplies of adequate or suitable materials Provided that, if the event in question continues for a continuous period in excess of [60] days, the Purchaser shall be entitled to give notice in writing to the Company to terminate the Contract.

15. GENERAL15.1 Each right of remedy of the Company under the Contract is without prejudice to any other right or remedy of the Company whether under the Contract or not. 15.2 If any provision of the Contract is found by any court, tribunal or

administrative body of competent jurisdiction to be wholly or partly illegal, invalid, void, voidable, unenforceable or unreasonable it shall to the extent of such illegality, invalidity, voidness, voidability, unenforceabiity or unreasonableness be deemed severable and the remaining provisions of the Contract and the remainder of such provision shall continue in full force and effect.

15.3 Failure or delay by the Company in enforcing or partially enforcing any provision of the Contract will not be construed as a waiver of any of its rights under the Contract.

15.4 Any waiver by the Company of any breach of, or any default under, any provision of the Contract by the Purchaser will not be deemed a waiver of any subsequent breach or default and will in no way affect the other terms of the Contract.

15.5 The parties to this Contract do not intend that any term of this Contract will be enforceable by virtue of the Contracts (Rights of Third Parties) Act 1999 by any person that is not a party to it.

16. JURISDICTION16.1 The formation, existence, construction, performance, validity and all

aspects of the Contract shall be governed by Northern Irish law and the parties submit to the exclusive jurisdiction of the Northern Ireland courts.

45 FTTx Microducting Systems


Have you got the complete set?Download from www.radiustelecoms.com

Contact us to find out more:

Cable, Telecoms & Specials (CTS) Division

t: +44 (0)28 3844 6060e: [email protected]: www.radiustelecoms.com

Contact us to find out more:

Cable, Telecoms & Specials (CTS) Division

t: +44 (0)28 3844 6060e: [email protected]: www.radiustelecoms.com

fttx - radius systems ltdradiustelecoms.com/uploadedfiles/6-1597849748-fttx... · 25 fttx...

Documents