full course handbook

ALS Training Academy – Course Handbook 2015 1

Training Academy

Courses for e�ective Asset Care Management

Course Handbook 2017

2 ALS Training Academy – Course Handbook 2015

To increase the understanding and application of e�ective Asset Care management, by providing training services to our clients and industry.

Asset Care is a process of evaluating the ‘health’ of an industrial plant or equipment, monitoring its condition and using the data gained to make decisions. These decisions can optimise production, extend asset life, ensure safe operation and minimise maintenance costs.

Our vision

RecognitionWe are an Approved Training Body with AINDT, allowing us to provide recognised

Body for Non Destructive Testing and an examination centre for Condition

include the relevant AINDT examination

What’s inside…Why choose ALS Training Academy for your training needs? ....................................... 1

Training Locations ................................................ 2

.................................................. 2

Magnetic Particle Testing Level 2 ............................ 4Penetrant Testing Level 2 ........................................ 5Ultrasonic Plate and Thickness Testing ................... 6Ultrasonic Testing of Welds Level 2 ......................... 7Vibration Analysis Level 1 ........................................ 8Vibration Analysis Level 2 ........................................ 9Informational Courses ........................................ 10

...... 11NDT Methods and Applications .............................. 12Specialised NDT Methods and Application ............ 13Oil Analysis ............................................................. 14Reliability Based Condition Monitoring ................. 15Schedule of Rates ............................................... 16

Enrolment Form .................................................. 17


Why choose ALS Training Academy for your training needs?

By choosing ALS as your training provider you will have selected a company that values your learning experience. To ensure you have the best chance of success in your course, we adopt modern training principles that focus on your learning needs.

We o�er:

Competitive PricingTraining is an investment in the future. We understand the need for wise investments, and have endeavoured to provide you with high quality courses at very reasonable rates.

Avoid the frustration of paying for prerequisite courses. When you enrol in our courses you will also receive access to relevant prerequisite courses and additional support.

Pre and Post-Course SupportAs soon as your enrolment is approved, you will get access to our online training system until six months after the course date.

Our online system provides you with access to our discussion forums. Your will have access to others that have participated in the course and to our trainers and presenters.

Quality Learning Environment

You will be in a comfortable relaxed environment to enhance your learning experience.

When learning practical skills, you can be sure that you will have the equipment you need to get enough practical ‘hands-on’ time to develop your skills.

Experienced and Enthusiastic Trainers and Presenters

of experience will provide you with both an enjoyable, and educational experience.

presenters have a deep understanding of the content, vast on the job experience

of experience and expertise you will come away with a much greater insight and understanding to apply in your workplace.

$


Training Locations

Two main centres can cater for all of our courses:

Perth, WA109 Bannister Road Canning Vale, WA 6155

Brisbane, QLD7 Brisbane Road Riverview, QLD 4303

We also provide training at a number of our other branches including:

Gladstone, QLD4 Beckinsale Street Gladstone, QLD 4680

Melbourne, VIC450 Dynon Road West Melbourne, VIC 3003

Sydney, NSW2/171-175 Newton Road Wetherill Park, NSW 2161

Virginia, QLD41 Yarraman Place, Virginia, QLD 4014

Wellington, NZ74 Seaview Road Lower Hutt, Wellington

These types of courses are recognised by AINDT

The courses we currently provide include:

ALS Training CentresWe have developed our training centres to accommodate the needs of both our informational and

We ensure that our people providing these courses are

experienced trainers.

On site Solution – at your premises.

If you would prefer us to come to you we are happy to accommodate where possible. Talk to us about your requirements so that we can determine how we can best meet your needs.

Magnetic Particle Testing Level 2 (MT2 – Multisector)

Penetrant Testing Level 2 (PT2 – Multisector)

Ultrasonic Plate and Thickness Testing (UT level 1)

Ultrasonic Testing of Welds (UT2 - Welds)

Vibration Analysis Level 1 (VA1)

Vibration Analysis Level 2 (VA2)


competence against set criteria.

relevant standards.

requiring you to re-certify and demonstrate your ongoing competence.

• Demonstrate your competence• Have an independent body evaluate your competence• Meet employer / client requirements•

With AINDT the requirement varies slightly depending on

in two guidelines published by AINDT called Guide to

is a list outlining the requirements for NDT and CM

• Successful completion of approved training• Pass AINDT examinations• Completion of a visual acuity test

(applicable to NDT)• Evidence of practical experience using the relevant

method• • Complete an interview (only applicable for CM,

How ALS Training Academy can help you

you require to become a competent technician. During each course you can:

• Complete your AINDT approved training course• Sit your AINDT examinations• Complete a Visual Acuity test•

Our trainers are happy to help you complete your AINDT

process.

Academy. But we are there to help you where we can.

What do you get?We want your experience to be as painless as possible, so everything you will need to complete the course is provided. Your course enrolment includes:

• Full training course (lunch and morning tea provided)•

by AINDT)• • Student Textbook• Student Workbook• Access to our online version of the course and

prerequisite materials for 6 months: • Participation in our online discussion group•

wear a long sleeved shirt and enclosed shoes. We will provide you with any other safety equipment that you require.

What can you expect?Once you enrol in our course, you will receive access to our online courses, including the prerequisite courses. We

prerequisite exemptions if required. We will provide you with further details about your training and send you reminders leading up to your training.

During the course our talented trainers will keep you engaged in learning through plenty of practical work, activities, and demonstrations. As there is a lot to learn before the exams, you will be provided with study material that you can complete outside of the classroom.

to the test, when you undertake the AINDT theory and

We know that learning doesn’t stop when your training course is over. You can access our online materials for 6 months and be a part of our trainer led discussion group.


PrerequisitesTo complete this course successfully, you will need to have materials knowledge and the ability to complete basic algebra. As we want you to have a positive course experience, when you enrol into this course we will give you access to our online courses:• ‘Mathematics for CM and

NDT Methods’• ‘Materials’

Who Should AttendThis course is designed for anyone that wants to learn how to conduct magnetic particle testing. While prior experience using this method

you will need to gain the relevant practical experience before

Duration – 5 Days

Course Fee – $2,400 (includes GST & exam fee)

Other courses you might be interested in –• Ultrasonic Plate and Thickness

Testing• Ultrasonic Testing of Welds• Penetrant Testing• NDT Methods and Application• Specialised NDT Methods and

Application

Magnetic Particle Testing Level 2(MT2 – Multisector)

DescriptionThis course is intended to provide you with knowledge and skills on the widely used method of Magnetic Particle Testing (MT). This method

surface or near-surface discontinuities in parts and components made of ferromagnetic material. The Magnetic Particle Testing course will provide you the theoretical understanding of magnetism and how it applies to NDT. You will acquire the skill and knowledge on selection and application of di�erent magnetisation techniques as well as, interpretation and evaluation of indications. Those discontinuities which were hidden from the eyes become visible for judgment and required corrective action.

It is important that once you complete your training you can apply your new knowledge and skills in ‘real life’ situations. The goal of this course is to provide you with not only the ‘how’ but also the ‘why’ aspects to Magnetic Particle Testing. By knowing why you need to undertake certain processes, you will understand their importance and what to do when you’re faced with scenarios you have not seen before.

Key Learning OutcomesBy the end of this course, you will be able to:

Demonstrate an understanding of the key elements of the use of MT, including:

• • Methods of magnetisation• Magnetic particle testing equipment• Magnetic media and methods• Safety considerations and system control• Interpretation and evaluation of indications• Recording and reporting requirements• Magnetic particle testing related code and standards• Writing magnetic particle testing instruction

Conduct:

• MT using electromagnetic yokes • • MT on magnetic bench using di�erent techniques• Instruction writing for di�erent testing scenarios

CERTIFIED COURSE


Penetrant Testing Level 2(PT2 – Multisector)

PrerequisitesTo complete this course successfully, you will need to have materials knowledge and the ability to complete basic algebra. As we want you to have a positive course experience, when you enrol into this course we will give you access to our online courses:• ‘Mathematics for CM and NDT

Methods’• ‘Materials’

Who Should AttendThis course is designed for anyone that wants to learn how to conduct penetrant testing. While prior experience using this method is

you will need to gain the relevant practical experience before

Duration – 5 Days



Testing• Ultrasonic Testing of Welds• Magnetic Particle Testing• NDT Methods and Application• Specialised NDT Methods and

Application

DescriptionPenetrant testing (PT) is one of the common Non-Destructive Testing

method employs di�erent chemicals and processes to get a visible indication from surface-breakings in non-porous materials such as metals, plastics, glass, etc. In this method tiny surface discontinuities which are not detectable by visual inspection show colourful indications. The Penetrant Testing course will provide you with the theoretical understanding of penetrant and development systems and how they apply to NDT. You will acquire the skill and knowledge of the selection and application of di�erent penetrant and development techniques, as well as the interpretation and evaluation of indications. In this course you will not only apply the techniques, but also write work instructions for di�erent testing scenarios.

It is important that once you complete your training you can apply your new knowledge and skills in ‘real life’ situations. The goal of this course is to provide you with not only the ‘how’ but also the ‘why’ aspects to Penetrant Testing. By knowing why you need to undertake certain processes, you will understand their importance and what to do when you’re faced with scenarios you have not seen before.


Demonstrate an understanding of the key elements of the use of PT, including:

• Penetrant principles• Penetrant system media• Penetrant testing methods and application• Safety considerations and system control• Interpretation and evaluation of indications• Recording and reporting requirements• Penetrant testing related codes and standards• Writing penetrant testing instruction

Conduct:

• • PT using solvent removable and water washable techniques• Instruction writing for di�erent testing scenarios

CERTIFIED COURSE


PrerequisitesTo complete this course successfully, you will need to have materials knowledge and the ability to complete basic algebra. As we want you to have a positive course experience, when you enrol into this course we will give you access to our online courses:• ‘Mathematics for CM and

NDT Methods’• ‘Materials’

Who Should AttendThis course is designed for anyone that wants to learn how to conduct ultrasonic plate and thickness testing. While prior experience

is not a prerequisite. If you want

to gain the relevant practical experience before applying for

Duration – 5 Days


Other courses you might be interested in –• Ultrasonic Testing of Welds• Magnetic Particle Testing• Penetrant Testing• NDT Methods and Application• Specialised NDT Methods and

Application

Ultrasonic Plate and Thickness Testing(UT level 1)

Description

assist in the monitoring and maintenance of industrial facilities. This Ultrasonic Plate and Thickness Testing (UTT) course will provide you with the theoretical understanding of ultrasound and how it applies to Non-Destructive Testing (NDT). This knowledge and skill will be your key-stone as you learn how to correctly determine material thickness and recognise anomalies. You will then apply these principles to plate inspection, where you will locate a variety of hidden internal discontinuities.

It is important that once you complete your training you can apply your new knowledge and skills in ‘real life’ situations. The goal of this course is to provide you with not only the ‘how’ but also the ‘why’ aspects to ultrasonic plate and thickness testing. By knowing why you need to undertake certain processes, you will understand their importance and what to do when you’re faced with scenarios you have not seen before.


Demonstrate an understanding of the key elements of the use of ultrasound in NDT, including:

• Properties and behaviours of ultrasound• Generation of ultrasound• Ultrasonic testing equipment• Testing methods and calibration• Application of UTT variables that can impact test results• Ultrasonic thickness and plate testing techniques• Ultrasonic thickness testing related codes and standards• Recording and reporting requirements

Conduct:

• UTT equipment calibrations• Interpret digital and A-scan displays• Thickness measurements• Plate scans

CERTIFIED COURSE


Ultrasonic Testing of Welds Level 2(UT2 – Welds)

PrerequisitesTo complete this course successfully,

Ultrasonic Plate and Thickness Testing (UTT) technician and have a competent level of algebra. As we want you to have a positive course experience, when you enrol into this course we will give you access to our online courses:• ‘Mathematics for CM and

NDT Methods’• ‘Ultrasonic Plate and Thickness

Testing’

Who Should AttendThis course is designed for anyone that wants to learn how to conduct ultrasonic testing. Experience in ultrasonic testing e.g. UTT is required for this course. If you

need to gain the relevant practical experience before applying for

Duration – 10 Days



Testing• Magnetic Particle Testing• Penetrant Testing• NDT Methods and Application• Specialised NDT Methods and

Application

DescriptionUltrasonic testing is an advanced method of Non-Destructive Testing (NDT) involved with the detection of internal discontinuities in welded components. This Ultrasonic Testing of welds (UT2 – Welds) course will extend your knowledge and ability of Ultrasonic Plate and Thickness Testing to the application of shear waves in weld scanning. This upgrade of knowledge and skill will be your foundation as you learn how to

determine the type, location and size of internal discontinuities.

It is important that once you complete your training you can apply your new knowledge and skills in ‘real life’ situations. The goal of this course is to provide you with not only the ‘how’ but also the ‘why’ aspects to Ultrasonic Testing. By knowing why you need to undertake certain processes, you will understand their importance and what to do when you’re faced with scenarios you have not seen before.


Demonstrate an understanding of the key elements of the use of ultrasound in NDT of welds, including:

• Sound wave theory• • Ultrasonic testing equipment• Testing methods and calibration• Ultrasonic shear wave probes• Ultrasonic weld scanning techniques• Ultrasonic weld testing related codes and standards• Recording and reporting requirements

Conduct:

• UT equipment calibrations• • Defect locating and sizing • Ultrasonic test performance control

CERTIFIED COURSE


Prerequisites

There are no formal prerequisites for this course, however, some exposure to Vibration Analysis will

our included Mathematics for CM and NDT Methods course.

Who Should Attend

This course has been designed for anyone that wants to learn how to collect vibration data and conduct basic analysis regardless of experience. It would also suit anyone wanting to gain a general understanding of what is involved in data collection and analysis.

Duration – 5 Days


Other courses you might be interested in –

• Vibration Analysis Level 2• Reliability Based Condition

Monitoring

Vibration Analysis Level 1(VA1)

DescriptionVibration Analysis is a widely used condition monitoring method. This course will start by providing you with an introduction to maintenance practises including technologies such as vibration analysis, thermography and oil analysis. You will then cover the theory behind vibration analysis and learn how to take vibration measurements and conduct basic analysis to diagnose faults in common types of equipment.

If you have never been involved in vibration analysis before then by the end of this course you should be in a position where you are ready to undertake data collection under supervision. If you already have the


Demonstrate an understanding of the key elements of the use of vibration analysis, including:

• Maintenance practises and vibration condition monitoring• Interpretation of the graphical representation of vibration• Sources of vibration in equipment• Requirements for data collection• Basic analysis of data• Basic corrective actions

Demonstrate the ability to:

• Correctly place sensors on equipment• Set up and use a device to collect data• Import and export collection routes• Recognition of bad data during data collection

CERTIFIED COURSE


Vibration Analysis Level 2(VA2)

Prerequisites

You should have previously completed Vibration Analysis level 1 prior to this course, or have completed training and experience equivalent to that required for level

Who Should Attend

If you have over 6 months practical experience in vibration analysis and you want to be involved in the planning, analysis and recommendations component of vibration analysis, then this course is for you. This course is for the more serious vibration analyst wishing to further their career in this realm.

Duration – 5 Days


Other courses you might be interested in –

• Vibration Analysis Level 1• Reliability Based Condition

Monitoring

DescriptionVibration Analysis is one of the main condition monitoring techniques applied in the industry. This course builds on the level 1 course to provide you with additional knowledge and skill that will allow you to

You will need to have practical experience completing level 1 duties of data collection and basic analysis going into this course. You will be taken to the next level of skill and understanding to allow you to operate with greater independence. You will also be capable of

Key Learning OutcomesIn addition to the outcomes of the level 1 vibration analysis course, by the end of this course, you will be able to:

Demonstrate an understanding of the key elements of the use of vibration analysis, including:

• Vibration analysis fundamentals from the level 1 course• Interpretation and evaluation of test results• Diagnosis of common fault indications

Demonstrate the ability to:

• Select the correct sensors for the relevant job• Determine correct sensor location• Determine the correct parameters for data collection• Conduct detailed fault analysis• Determine appropriate corrective actions based on analysis• Perform basic (single-channel) impact tests to determine

natural frequencies• Generate reports

Understand:

• Select reference standards• Equipment testing and diagnostic procedures• Fault severity determination

CERTIFIED COURSE


What do you get?We want your experience to be as painless as possible, so everything you will need to complete the course is provided. Your course enrolment includes:

• Full training course (lunch and morning tea provided)• • Training materials• Access to our training materials through our online system• Participation in our online discussion group

What can you expect?Once you enrol in our course, you will receive access to our online materials

provide you with further details about your training and send you reminders leading up to your training.

During the course our highly experienced experts will keep you engaged through interactive presentations, discussion and demonstrations. There is often a lot to take in during these sessions, and you may have questions once the course is over. Our online discussion forums provide you with access to our experts where you can ask questions and participate in discussions after your course is over.

Informational Courses

These are all other courses that we provide

can range from long to short, from training to workshops to seminars.The courses we currently provide include:

Through careful selection, we have chosen our very best people to present these courses. They are

and have a very high level of presentation skills.

NDT Methods and Applications

Oil Analysis for Industrial Maintenance Professionals

Reliability Based Condition Monitoring

Specialised NDT Methods and Application


Who Should Attend

• Engineering and Maintenance Managers

• Reliability Engineers• Plant Engineers• Maintenance Planners,

Coordinators and Supervisors• Operations Managers• Integrity Engineers • Plant Inspectors

Duration – 2 Days

Course Fee – $750(includes GST)

DescriptionThe aim of this training is to provide participants with a detailed

pressure vessels. This includes statutory requirements and obligations in accordance with the Mines Safety and Inspection Act and Regulations. The application and guiding principles relating to the associated Australian standards are also explained.

Topics:

• Mines Safety and Inspection Act and Regulations• • Relevant Australian Standards• Risk and Hazard Management• • Where and when to seek additional technical resources and expertise

INFORMATIONAL COURSE


NDT Methods and Applications

Who Should Attend

• Maintenance Managers• Maintenance Planners • Coordinators and Supervisors• Operations Managers• Reliability and Integrity Engineers • Plant Inspectors• Condition Monitoring personnel

Duration – 3 Days

Course Fee – $1,200(includes GST)

DescriptionThis course has been designed to provide you with an overview of the commonly used NDT methods. It will help you to better understand the important role of NDT in the engineering design process and how NDT is used to monitor the condition of your assets.

We will explain how the methods work and where they are used in industrial settings. This will help you identify the relevant methods

will gain an understanding of strengths and limitations of each method

test.

This course covers the basic theory of each method, common test applications and basic practical experience of equipment in general use.

Topics:

• The role of NDT in Engineering Design and Asset Care • • Indications, Discontinuities and Defects• Types of Discontinuities• Manufacturing Processes and Associated Defects• E�ects of Defects on Serviceability of Products • For each method (MT, PT, UT, RT, ET and specialised

methods e.g. ACFM, Phased Array) – Explanation of how the method works – Advantages and Disadvantages – Suitability of Materials for Testing – Detection of Discontinuities



Specialised NDT Methods and Application


Who Should Attend

• Maintenance Managers• Maintenance Planners • Coordinators and Supervisors• Operations Managers• Reliability and Integrity Engineers • Plant Inspectors• Condition Monitoring personnel

Duration – 3 Days


DescriptionThis course has been designed to build on the NDT Methods and Applications course. It explains how the standard NDT methods have been developed into specialised methods and provides a basic overview of how each method works.

While explaining how each method works, you will introduced to the advantages and limitations applicable to the industrial setting and you will have time to discuss the potential use at your site. You will also be presented with a case study and demonstration, delivered by an expert in each method.

Topics:

• History of NDT• Development of Specialised NDT Methods• For each method

– Explanation of how the method works – Advantages and Disadvantages – Suitability of Materials for Testing – Detection of Discontinuities – Case Study – Demonstration (where possible)

• Methods included: – Eddy Current Tube Testing – Remote Field Testing – Magnetic Bias Technique – Saturated Low Frequency Eddy Current Testing – Alternating Current Field Measurement – The development of Ultrasonic Testing – Internal Rotary Inspection System – Guided Wave Ultrasonic Testing – Automated Ultrasonic Testing (Rapid Motion System) – Phased Array Ultrasonic Testing – Time of Flight Di�raction – Digital Radiography Testing – Computed Radiography Testing



Who Should Attend

designed for all maintenance professionals in mind. Including, Plant technicians, Tradespeople

Condition monitoring personnel, Lubrication engineers and all those who seek to improve their reliability programs.

Duration – 1 Day

Course Fee – $330(includes GST)

– – – –

Calendar for Oil Analysis Training

The Oil Analysis course is run by our Tribology team.

Please visit the web link below for their training details, times and locations.

alsglobal.com > tribology > downloads > training programs

DescriptionOur one-day, exclusive workshops are presented in a relaxed atmosphere where participants are encouraged to interact with our trainers and other maintenance professionals. You gain the knowledge and skills necessary to improve the oil, fuel, coolant, and condition monitoring sectors of your maintenance program. Implement practices and develop advanced skills that help you reduce maintenance costs and decrease downtime, improve the reliability, maximize the life, increase the resale value, and protect the warranty on your equipment.

Topics:

Oil Analysis & Condition Monitoring

• The role of oil analysis• • • Oil cleanliness and particle analysis• Taking an oil sample• Troubleshooting and predictive maintenance• • Interpretation of results• Webtrieve online software• Case studies

Coolant Testing

• Engine coolants—changes through the years• Properties of coolants

– Conventional coolants – Extended life coolants (OAT technology) – Hybrid coolants (NOAT technology)

• Tests methods for coolants• Proper coolant sampling techniques• Symptoms of cooling system failure• Coolant tests guidelines• Coolant report review• Toolbox tools to maintain cooling systems

Fuel Testing

• Why test your fuel• The importance of fuel cleanliness• • • Fuel problem symptoms• Proper fuel sampling techniques• How to read the analysis report




Who Should Attend

• Engineering and Maintenance Managers

• Reliability Engineers• Plant Engineers• Maintenance Planners,

Coordinators and Supervisors• Operations Managers• Condition Monitoring Engineers

and Supervisors• Reliability Technicians

Duration – 2 Days


DescriptionWith challenges in the global economy and cost pressure on operating mines and plants, it is imperative to apply best practices to plant reliability management. Condition monitoring, where correctly applied forms an integral part of any reliability improvement and cost management program. ALS has worked with the industry over many years to optimise the returns from their condition monitoring investments and is now able to provide training in Reliability

Program Optimisation and Root Cause Analysis.

In many situations, condition monitoring and predictive maintenance has not been applied correctly and this has resulted in unnecessary

and equipment condition. In other cases, condition monitoring has only

improvement in plant reliability.

Come and understand the principles of a Reliability Based Condition Monitoring Program based on industry best practices, as embodied in ISO 17359 – 2011 and a suite of other condition monitoring standards. These principles are complemented by real world practical experience about what works and what doesn’t work. ALS presenters are skilled communicators and experienced engineers providing a highly interactive and informative experience.

Topics:

• Maintenance and reliability• Equipment failures – why and how• Reliability principles and applications• Condition Monitoring Standards• Applying the right technology• Applying the right condition monitoring process• Getting the best information from condition monitoring• Proactive work to improve equipment reliability• Root cause analysis and addressing the causes of poor reliability• Condition Monitoring – A dynamic program•



Magnetic Particle Testing Level 2 (MT2 – Multisector)

5 days

$2,400

Penetrant Testing Level 2 (PT2 – Multisector)

5 days

$2,400

Ultrasonic Plate and Thickness Testing (UT level 1)

5 days

$2,400

Ultrasonic Testing of Welds Level 2 (UT2 - Welds)

10 days

$3,600

Vibration Analysis Level 1 (VA1)5 days

$2,400

Vibration Analysis Level 2 (VA2)5 days

$2,400


2 days

$1,200

NDT Methods and Application3 days

$1,200

and Inspection

2 days

$750


1 days

$330

Schedule of Rates

Informational Courses

Specialised NDT Methodsand Application

3 days

$1,200

All costs are per person and inc. GST.


CONTACT DETAILS

Full Name

Email

Phone

Company Name (if employed)

Company Address

State Postcode

PAYMENT OPTIONS

Credit Card Type Visa MasterCard Purchase Order No.

CC Number Name on Card

Expiration Date / CCV Signature

Other payment option: Please advise if you would like to pay by an alternate method e.g. Cheque.

lunch, refreshments, local laboratory tour, training manual, stationary, etc. All cancellation requests must be made in writing. Registration fees for courses cancelled within seven days of the course commencement are nonrefundable. ALS Training Academy reserves the right to cancel or postpone any training course in the event of not having enough nominations for a particular session.

CERTIFIED COURSES

Magnetic Particle Testing Level 2 $2,400

Penetrant Testing Level 2 $2,400

Ultrasonic Testing (Plate & Thickness) $2,400

Ultrasonic Test Level 2 (Welds) $3,600

Vibration Analysis Level 1 $2,400

Vibration Analysis Level 2 $2,400

INFORMATIONAL COURSES

Reliability Based Condition Monitoring $1,200

NDT Methods and Application $1,200

$750

Oil Analysis for Industrial Maintenance Professionals $330

Specialised NDT Methods and Application $1,200

All pricing includes GST.

ENROLMENT INFORMATION Please refer to our calendar for course locations and dates.

Full Name Course Location Date Cost

Total Cost

Please send your completed form to [email protected] or post to one of our training centres listed below.

Enrolment Form

LOCATIONS

QLD – P: 07 3816 55007 Brisbane Road Riverview, QLD 4303

WA – P: 08 9232 0300109 Bannister Road Canning Vale, WA 6155

We also have 6 branch locations in AU & NZ or we can come to your site.Contact us for more details.

Subscribe

Follow us

Helpful links

Asset Care Counts is a regular publication produced by the ALS Industrial team featuring case studies, articles and announcements relevant to the Power, Water & Infrastructure, Mining & Minerals Processing, Oil & Gas and Welding & Fabrication industries keeping our clients up to date with the latest developments at ALS.

� Signup to receive Asset Care Counts

au.linkedin.com /company/als-industrialtwitter.com /alsindustrial

alsglobal.com/ industrialalsglobal.com/ ndtalsglobal.com/andtalsglobal.com/ rbialsglobal.com/conditionmonitoringalsglobal.com/ mechtestingalsglobal.com/ materialsengineeringalsglobal.com/ powerservicesalsglobal.com/ remlifealsglobal.com/ tribology

Industrial asset integrityNon-destructive testingAdvanced non-destructive testingRisk based inspectionCondition monitoringMechanical testingMaterials engineeringPower servicesRemLife – Remaining life assessmentOil, fuel, coolant & metalworking analysis

Training Academy

for your Asset Care Management training.

Enquiries:

WA 08 9232 0300 [email protected]

alsglobal.com

full course handbook

Documents