full quality assurance certificate - cdb engineering...8860-2016-ce-ita-accredia this certificate...
TRANSCRIPT
Page 1 of 2
Lack of fulfilment of conditions as set out in the Certification Agreement may render this Certificate invalid. DNV GL Business Assurance Italia S.r.l. Via Energy Park, 14, 20871 Vimercate (MB), Italy. Tel: 039 68 99 905. www.dnvgl.it/businessassurance
FULL QUALITY
ASSURANCE CERTIFICATE Certificate No.:
8860-2016-CE-ITA-ACCREDIA
This certificate consists of 2 pages
Initial date:
18 October, 2016
Valid:
08 January, 2018 – 11 August, 2020
This is to certify that the quality system of
CDB ENGINEERING S.P.A Via L. Maggi, 19 - Loc. Zorlesco 26841 – Casalpusterlengo (LO) - Italy
has been assessed and found to comply with respect to the conformity assessment procedure described in:
ANNEX III MODULE H OF DIRECTIVE 2014/68/EU ON PRESSURE EQUIPMENT
This certificate is valid for the following scope:
Type of Pressure Equipment Pressure Accessory
Product Name Filter Y casting, Filter Y welded, Filter Y Forged, Filter T welded, Basket filter
welded, Basket filter casting, Spool pipes welded, Steam trap welded, Sight glasses casting, sight glasses forging,
Sample cooler welded, Plug valves.
Place and date: Vimercate 15 January, 2018
For the notified body 0496: DNV GL Business Assurance Italia
S.r.l.
______________________________________________________________________________
Nicola Privato
Management Representative
Page 2 of 2
Certificate No.: 8860-2016-CE-ITA-ACCREDIA
Place and date: Vimercate 15 January, 2018
Revision No: 01
Lack of fulfilment of conditions as set out in the Certification Agreement may render this Certificate invalid. DNV GL Business Assurance Italia S.r.l. Via Energy Park, 14, 20871 Vimercate (MB), Italy. Tel: 039 68 99 905. www.dnvgl.it/businessassurance
Jurisdiction
Application of Directive 2014/68/EU and Decreto Legislativo n. 26 of 15 February 2016.
Certificate history
Revision Description Issue date
00 Original Certificate 18 October, 2016
01 Scope extension to plug valves and Renewal of certificate
15 January, 2018
Products covered by this certificate
Product name Product description Applied product standard
Filter Y casting, Filter Y welded, Filter Y Forged, Filter T welded, Basket filter welded, Basket filter casting, Spool pipes welded, Steam trap welded, Sight glasses casting, sight glasses forging, Sample cooler welded.
Filter Y casting up to DN450, Filter Y welded up to DN600, Filter Y Forged up to DN200, Filter T welded up to DN1060, Basket filter welded up to 2510 liters, Basket filter casting up to DN300, Spool pipes welded up to DN400, Steam trap welded up to 11 liters, Sight glasses casting up to DN200, sight glasses forging up to DN200, Sample cooler welded up to DN200, Plug valves up to DN100.
ASME B16.5, ASME VIII Div.1, EN 13445, ASME B31.3, ASME B16.34, VSR
Sites covered by this certificate
Site name Site Address Audited by Date Report ref
CDB ENGINEERING S.P.A
Via L. Maggi, 19 - Loc. Zorlesco 26841 – Casalpusterlengo (LO) - Italy
Massimo Schiavone Massimo Rota Gelpi Savino Grieco
2017/10/31 2017/11/17
Z0548774-20171031-SE-PED Mod H-MHV Z0548774-20171117-RC-PED-Mod. H-MRG.
Terms and conditions for the certificate
Valid terms and conditions are found in the DNV GL´s PED Certification Rules.
END OF CERTIFICATE