full thermowell catalog

Continued Innovation since 1836ISO9001:2008 CERTIFIED

Threaded Regular

Lagging Extensions

Weld-in

Flanged

Protection Tubes

Projectile

Sanitary

Test

Vanstone

Union Connection Fittings

www.palmerwahl.com04/11 PW1100

2011 Specifications Catalog

Thermowells andFittings

Thermowells andFittings

HVAC Instrumentation

(800) 421-2853 • FAX (828) 658-0728 • www.palmerwahl.comContinued Innovation since 18362ISO9001:2008 CERTIFIED

Thermowell Selection and

OrderingThermowell Selection and Ordering

Material CodesMaterial Code Material Code

Brass*+ 01 Monel R-405 07

Carbon Steel C-108* 02 Hastelloy C 08

304SS* 03 Hastelloy B 09

304LSS* 04 Titanium 10

316SS* 05 Tantalum Sheath** 11

316LSS* 06

Thermowell Material Selection Guide ........................................................................................................................ 3

112 Series Thermowells: .260 Diameter Bore, 1/2"-14 NPS Internal Thread ................................................................................... 4

113 Series Thermowells: .385 Diameter Bore, 1/2"-14 NPS Internal Thread, and 1/4"-18 NPT Internal Thread. ............................................... 5

114 Series Thermowells: .437 Diameter Tapered Bore, 1-1/4"-18 NEF Internal Thread......................................................................... 6

115 Series Thermowells: .501 Diameter Bore, 7/8"-22 NS Internal Thread .................................................................................... 7

116 Series Thermowells: .437 Diameter Bore, 7/8" NS Internal Thread ........................................................................................ 8

Projectile Thermowells: .437" Diameter Tapered Bore, 1-1/4"-18 NEF Internal Thread ........................................................................ 8

Sanitary Thermowells: .260 Diameter Bore, 1/2"-14 NPT Internal Thread ...................................................................................... 8

117 Series Test Thermowells: .437 Diameter Bore, 1/2"-14 NPS Internal Thread, Protection Tubes. .......................................................... 9

118 Series Vanstone & Test Thermowells: .260 Diameter Bore, .385 Diameter Bore, .437 Diameter Bore, 1/2"-14 NPS Internal Thread ................... 10

Union Connection Fittings: 112, 114 & 115 Series: Union, Flanged, Lagging and Flanged Lagging Connections ......................................... 11

Page Selection

How to OrderThreaded and Regular Thermowells

Step 1: Designates Bore Diameter, Internal Thread and Type of Well

1) Well Series

112 0 2 02 01

2) Process Connection / Stem Length

3) Material

Step 2: Determines External Thread and Stem Length

Step 3: Determines Material such as Brass or 304SS

How to OrderFlanged Thermowells

Step 1: Designates Bore Diameter, Internal Thread and Type of Well

1) Well Series

2) Process Connection / Stem Length

3) Material

Step 2: Determines External Thread and Stem Length

Step 3: Determines Material such as Brass or 304SS

112 7 0 06 03 1.5 150#

4) Nominal Pipe Size (NPS)

5) Flange Pressure Rating

Step 4: Determines Nominal Pipe Size such as 1.5 Flange Size

Step 5: Determines Pressure Rating such as 150# or 300#

Palmer has manufactured thermowells since the 1940's, and has gained an expertise unsurpassed in the industry. Our machined wells are built in our factory for complete control of the production process. Our attention to detail allows us to

produce precision wells, allowing us to build to meet your needs and specifications. Thank you from all of us at Palmer Wahl for considering our products. We appreciate your business.

04/11 PW1100

For information on Pressure-Temperature Ratings please see our website or call Customer Service

* Standard materials in stock. All other materials available upon request.** All wells with sheaths are continuous outside diameters, regardless of any steps shown on illustrations. + Not available in Built-up wells.


(800) 421-2853 • FAX (828) 658-0728 • www.palmerwahl.com Continued Innovation since 1836 3ISO9001:2008 CERTIFIED

Material Selection GuideMaterial Selection Guide

Corrodent Temp.°F Conc. % Recommended Material

Acetic Acid 212 ALL MonelAcetic Anhydride 300 NickelAcetone 212 ALL 304SSAcetylene 400 304SSAlcohols 212 ALL 304SSAlum (Potassium or Sodium) 300 ALL Hast. CAluminum Chloride 212 ALL Hast. BAluminum Sulfate 212 ALL 316SSAmmonia, Dry 212 ALL 304, 316SSAmmonium Hydroxide (Ammonia, Aqua) 212 ALL 304, 316SSAmmonium Chloride 300 50% MonelAmmonium Nitrate 300 ALL 304SSAmmonium Sulfate 212 ALL 316SSAmyl Acetate 300 ALL 304SSAniline 25 MonelAsphalt 250 304SSAtmosphere (Industrial & Marine) 304SSBarium Compounds See CalciumBeer 70 304SSBenzene (Benzol) 212 SteelBenzoic Acid 212 ALL 316SSBleaching Powder 70 15% MonelBorax 212 ALL BrassBordeaux Mixture 200 304SSBoric Acid 400 ALL 316SSBromine 125 DRY MonelButane 400 ALL SteelButyl Alcohol See AlcoholsButyric Acid 212 Hast. CCalcium Bisulphite 75 ALL Hast. CCalcium Chloride 212 ALL Hast. CCalcium Hydroxide 300 20% Hast. CCalcium Hypochlorite See Bleaching PowderCarbolic Acid See PhenolCarbon Dioxide, Dry 800 ALL BrassCarbonated Water 212 ALL 304SSCarbonated Beverages 212 304SSCarbon Disulfide 200 304SSCarbon Tetrachloride 125 ALL MonelChlorine, Dry 100 MonelChlorine, Moist 100 ALL MonelChloroacetic Acid 212 ALL MonelChloroform, Dry 212 MonelChromic Acid 300 ALL Hast. CCider 300 ALL 304SSCitric Acid 212 ALL Hast. CCopper (10) Chloride 212 ALL Hast. CCopper (10) Nitrate 300 ALL 316SSCopper (10) Sulfate 300 ALL 316SSCopper Plating Solution (Cyanide) 180 304SSCopper Plating Solution (Acid) 75 304SSCorn Oil 200 304SSCreosote 200 ALL 304SSCrude Oil 300 MonelEthyl Acetate See Lacquer ThinnerEthyl Chloride, Dry 500 SteelEthanol See AlcoholsEthylene Glycol (Uninhibited) 212 ALL 304SSEthylene Oxide 75 SteelFatty Acids 500 ALL 316SSFerric Chloride 75 ALL Hast. CFerric Sulfate 300 ALL 304SSFormaldehyde 212 40% 316SSFormic Acid 300 ALL 316SSFreon 300 SteelFluorine, Anhydrous 100 304SSFurfural 450 316SSGasoline 300 SteelGlucose 300 304SSGlue, ph 6-8 300 ALL 304SSGlycerine 212 ALL BrassHydrobromic Acid 212 ALL Hast. CHydrochloric Acid (37-38%) 225 ALL Hast. BHydrogen Chloride, Dry 500 304SS

Corrodent Temp.°F Conc. % Recommended Material

Hydrocyanic Acid 212 ALL 304SSHydrofluoric Acid 212 60% MonelHydrogen Fluoride, Dry 175 SteelHydrofluosilicic Acid 212 40% MonelHydrogen Peroxide 125 10-100% 304SSKerosene 300 ALL SteelLacquers & Thinners 300 ALL 304SSLactic Acid 300 ALL 316SSLime 212 ALL 316SSLinseed Oil 75 SteelMagnesium Chloride 212 50% NickelMagnesium Hydroxide (or Oxide) 75 ALL 304SSMagnesium Sulfate 212 40% 304SSMercuric Chloride 75 10% Hast. CMercury 700 100% SteelMethylene Chloride 212 ALL 304SSMethyl Chloride, Dry 75 SteelMilk, fresh or sour 180 304SSMolasses See GlucoseNatural Gas 70 304SSNitric Acid 75 ALL 304SSNitric Acid 300 ALL 316SSOxygen 75 ALL SteelOleic Acid See Fatty AcidsOxalic Acid 212 ALL MonelPhotographic Bleaching 100 ALL 304SSPalmitic Acid See Fatty AcidsPhosphoric Acid 212 ALL 316SSPhenol 212 ALL 316SSPotassium Compounds See Sodium CompoundPropane 300 SteelRosin 700 100% 316SSSea Water 75 MonelSoap & Detergents 212 ALL 304SSSodium Bicarbonate 212 20% 316SSSodium Bisulfite 212 20% 304SSSodium Bisulfate 212 20% 304SSSodium Carbonate 212 40% 316SSSodium Chloride 300 30% MonelSodium Chromate 212 ALL 316SSSalt or Brine See Sodium ChlorideSodium Cyanide 212 ALL 304SSSodium Hydroxide 212 30% 316SSSodium Hypochlorite 75 10% Hast. CSodium Nitrate 212 40% 304SSSodium Nitrite 75 20% 316SSSodium Phosphate 212 10% SteelSodium Silicate 212 10% SteelSodium Sulfide 212 30% 316SSSodium Sulfite 212 10% 316SSSodium Sulfate 212 30% 304SSSodium Thiosulfate 212 ALL 304SSSteam 304SSStearic Acid See Fatty AcidsSugar Solution See GlucoseSulfur 500 304SSSulfur Chloride 75 DRY 316SSSulfur Dioxide 500 DRY 316SSSulfur Trioxide 500 DRY 316SSSulfuric Acid 212 10% 316SSSulfuric Acid 212 10-90% Hast. BSulfuric Acid 212 90-100% Hast. BSulfuric Acid, Fuming 175 Hast. CSulfurous Acid 75 20% 316SSTitanium Tetrachloride 75 ALL 316SSTannic Acid 75 40% Hast. BToluene 75 SteelTrichloroacetic Acid 75 ALL Hast. BTrichloroethylene 300 DRY MonelTurpentine 75 316SSVarnish 150 SteelZinc Chloride 212 ALL Hast. BZinc Sulfate 212 ALL 316SS

04/11 PW1100



112 Series Thermowells 112 Series Thermowells

Threaded Regular: Series 1120

"S" Stem

Length

"U" Insertion Length

"P" NPT External Thread Size

1/2" - 14 3/4" - 14 1" - 11-1/2

2-1/2"4"6"9"12"15"18"

1-5/8"2-1/2"4-1/2"7-1/2"10-1/2"13-1/2"16-1/2"

1120-1021

1120-1041120-1061120-1091120-1121120-1151120-118

1120-2021

1120-2041120-2061120-2091120-2121120-2151120-218

1120-3021 1120-3041120-3061120-3091120-3121120-3151120-318

"D" Diameter 5/8" 3/4" 3/4"

Threaded Regular - Lagging Extension: Series 1121

"S" Stem

Length


"T" Lagging

Extension


1/2" - 14 3/4" - 14 1" - 11-1/2

6"9"12"15"18"

2-1/2"4-1/2"7-1/2"10-1/2"13-1/2"

2"3"3"3"3"

1121-1061121-1091121-1121121-1151121-118

1121-2061121-2091121-2121121-2151121-218

1121-3061121-3091121-3121121-3151121-318

"D" Diameter 5/8" 3/4" 3/4"

Built-Up Threaded Regular: Series 1124

"S" Stem

Length



3/4" - 14 1" - 11-1/2

24"30"36"42"48"

22-1/2"28-1/2"34-1/2"40-1/2"46-1/2"

1124-2241124-2301124-2361124-2421124-248

1124-3241124-3301124-3361124-3421124-348

Built-Up Threaded Regular - Lagging Extension: Series 1125

"S" Stem

Length



3/4" - 14 1" - 11-1/2

24"30"36"42"48"

19-1/2"25-1/2"31-1/2"37-1/2"43-1/2"

1125-2241125-2301125-2361125-2421125-248

1125-3241125-3301125-3361125-3421125-348

Weld-In: Series 1126

"S" Stem

Length


"P" Nominal Pipe Size

3/4" - 1.050 1" - 1.315

4"6"9"

12"15"18"24"

2-1/2"4-1/2"7-1/2"10-1/2"13-1/2"16-1/2"22-1/2"

1126-2041126-2061126-2091126-2121126-2151126-2181126-224

1126-3041126-3061126-3091126-3121126-3151126-3181126-324

Flanged: Series 1127

"S" Stem Length "U" Insertion Length Type Number

4"6"9"12"15"18"24"

2-1/2"4-1/2"7-1/2"10-1/2"13-1/2"16-1/2"22-1/2"

1127-0041127-0061127-0091127-0121127-0151127-0181127-024

Specifications subject to change without notice. For Pressure Ratings see www.palmerwahl.com/thermowells.php

.260" Diameter Bore, 1/2"-14 NPS Internal Thread. For use with Bimetals, 1035 & 1050 Dials, 81 Series Bulbs, #20 Gauge T/C Elements, and Digi-Stem 1/4" diameter with 1/2" NPT Probes.

Flange thickness over 1", "U" - 1/2; over 1-1/2", "U" -1"

* 1"on the 1/2"-14 NPT External Thread ** 3/4" on the 1/2"-14 NPT External Thread1 Contact factory for prints on these series

04/11 PW1100



113 Series Thermowells113 Series Thermowells


"S" Stem

Length



1/2" - 14 3/4" - 14 1" - 11-1/2

2-1/2"4"6"9"12"15"18"

1-5/8"2-1/2"4-1/2"7-1/2"

10-1/2"13-1/2"16-1/2"

1130-1021

1130-1041130-1061130-1091130-1121130-1151130-118

1130-2021

1130-2041130-2061130-2091130-2121130-2151130-218

1130-3021

1130-3041130-3061130-3091130-3121130-3151130-318

"D" Diameter 5/8" 3/4" 3/4"


"S" Stem

Length


"T" Lagging

Extension


1/2" - 14 3/4" - 14 1" - 11-1/2

6"9"12"15"18"

2-1/2"4-1/2"7-1/2"

10-1/2"13-1/2"

2"3"3"3"3"

1131-1061131-1091131-1121131-1151131-118

1131-2061131-2091131-2121131-2151131-218

1131-3061131-3091131-3121131-3151131-318

"D" Diameter 5/8" 3/4" 3/4"

Threaded Regular 1/4" NPT: Series 1138

"S" Stem Length

"U" Insertion Length Type Number

3-1/4"5-1/4"7-1/4"9-1/4"

11-1/4"13-1/4"

2"4"6"8"10"12"

1138-1031138-1051138-1071138-1091138-1111138-113


"S" Stem

Length



3/4" - 1.050 1" - 1.315

4"6"9"12"15"18"24"

2-1/2"4-1/2"7-1/2"10-1/2"13-1/2"16-1/2"22-1/2"

1136-2041136-2061136-2091136-2121136-2151136-2181136-224

1136-3041136-3061136-3091136-3121136-3151136-3181136-324



4"6"9"

12"15"18"24"

2-1/2"4-1/2"7-1/2"10-1/2"13-1/2"16-1/2"22-1/2"

1137-0041137-0061137-0091137-0121137-0151137-0181137-024

Threaded Regular - Lagging Extension 1/4" NPT: Series 1139

"S" Stem Length


5-1/4"7-1/4"9-1/4"11-1/4"13-1/4"

1-1/2"3-1/2"5-1/2"7-1/2"9-1/2"

1139-1051139-1071139-1091139-1111139-113

.385" Diameter Bore, 1/2"-14 NPS and 1/4"-18 NPT Internal Thread. For use with #20 Gauge T/C Elements, and Digi-Stem 3/8" diameter with 1/2" NPT Probes.

Flange thickness over 1", "U" - 1/2; 1-1/2", "U" -1"

* 1"on the 1/2"-14 NPT External Thread ** 3/4" on the 1/2"-14 NPT External Thread1 Contact factory for prints on these series

Note: For Built-up Wells please contact factory


04/11 PW1100



114 Series Thermowells 114 Series Thermowells

Threaded Regular with Tapered Bore: Series 1140

"S" Stem

Length



3/4" - 14 1" - 11-1/2

3-1/2"6"8"9"

12"18"

2-1/2"5"7"8"11"17"

1140-2031140-2061140-2081140-2091140-2121140-218

1140-3031140-3061140-3081140-3091140-3121140-318

"D" Diameter 7/8" 1-1/16"

Threaded Regular with Tapered Bore - Lagging Extension: Series 1141

"S" Stem

Length


"T" Lagging Extension


3/4" - 14 1" - 11-1/2

6"8"9"12"18"

2-1/2"4"5"8"

14"

2-1/2"3"3"3"3"

1141-2061141-2081141-2091141-2121141-218

1141-3061141-3081141-3091141-3121141-318

"D" Diameter 7/8" 1-1/16"

"P" Diameter 1.05 1.315

Built-Up Threaded Regular with Tapered Bore: Series 1144

"S" Stem

Length



3/4" - 14 1" - 11-1/2

24"30"36"42"48"

23"29"35"41"47"

1144-2241144-2301144-2361144-2421144-248

1144-3241144-3301144-3361144-3421144-348

Built-Up Threaded Regular with Tapered Bore - Lagging Extension: Series 1145

"S" Stem

Length



3/4" - 14 1" - 11-1/2

24"30"36"42"48"

20"26"32"38"44"

1145-2241145-2301145-2361145-2421145-248

1145-3241145-3301145-3361145-3421145-348

"P" Diameter 1.05 1.315

Weld-In with Tapered Bore: Series 1146

"S" Stem

Length



3/4" - 1.050 1" - 1.315

3-1/2"6"8"9"12"18"24"

2-1/2"5"7"8"11"17"23"

1146-2031146-2061146-2081146-2091146-2121146-2181146-224

1146-3031146-3061146-3081146-3091146-3121146-3181146-324

Flanged with Tapered Bore: Series 1147


3-1/2"6"8"9"

12"18"24"

2-1/2"5"7"8"11"17"23"

1147-0031147-0061147-0081147-0091147-0121147-0181147-024

.437" Diameter Tapered Bore, .180" Taper per foot, 1-1/4"-18 NEF Internal Thread.For use with Industrials, 35A/AL & 50A/AL Dials, & 51-13 Series Bulbs,and Digi-Stem 5/8" diameter with 1-1/4"-18 NEF. Wells for 3/4" diameter stems available.



04/11 PW1100



115 Series Thermowells115 Series Thermowells


"S" Stem

Length



1/2" - 14 3/4" - 14 1" - 11-1/2

4"6"8"12"18"

3-1/16"5-1/16"7-1/16"

11-1/16"17-1/16"

1150-1041150-1061150-1081150-1121150-118

1150-2041150-2061150-2081150-2121150-218

1150-3041150-3061150-3081150-3121150-318

"D" Diameter 11/16" 3/4" 3/4"


"S" Stem

Length


"T" Lagging

Extension


1/2" - 14 3/4" - 14 1" - 11-1/2

6"8"12"18"

3-1/16"4-1/16"8-1/16"14-1/16"

2"3"3"3"

1151-1061151-1081151-1121151-118

1151-2061151-2081151-2121151-218

1151-3061151-3081151-3121151-318

"D" Diameter 11/16" 3/4" 3/4"

"P" Diameter .840 1.05 1.315

Built-Up Threaded Regular: Series 1154

"S" Stem

Length



3/4" - 14 1" - 11-1/2

24"30"36"42"48"

23-1/16"29-1/16"35-1/16"41-1/16"47-1/16"

1154-2241154-2301154-2361154-2421154-248

1154-3241154-3301154-3361154-3421154-348

Built-Up Threaded Regular - Lagging Extension: Series 1155

"S" Stem

Length



3/4" - 14 1" - 11-1/2

24"30"36"42"48"

20-1/2"26-1/2"32-1/2"38-1/2"44-1/2"

1155-2241155-2301155-2361155-2421155-248

1155-3241155-3301155-3361155-3421155-348

"P" Diameter 1.05 1.315


"S" Stem

Length



3/4" - 1.050 1" - 1.315

4"6"8"12"18"24"

3-1/16"5-1/16"7-1/16"11-1/16"17-1/16"23-1/16"

1156-2041156-2061156-2081156-2121156-2181156-224

1156-3041156-3061156-3081156-3121156-3181156-324



4"6"8"

12"18"24"

3-1/16"5-1/16"7-1/16"

11-1/16"17-1/16"23-1/16"

1157-0041157-0061157-0081157-0121157-0181157-024

.437" Diameter Tapered Bore, .180" Taper per foot, 1-1/4"-18 NEF Internal Thread.For use with Industrials, 35A/AL & 50A/AL Dials, & 51-13 Series Bulbs,and Digi-Stem 5/8" diameter with 1-1/4"-18 NEF. Wells for 3/4" diameter stems available.

.501" Diameter Bore, 7/8"-22 NS Internal Thread.For use with #20 Gauge T/C Elements.



04/11 PW1100



116 Series Projectile & Sanitary

Thermowells 116 Series Thermowells


"S" Stem

Length



1/2" - 14 3/4" - 14

2-1/4"3-3/4"4-3/4"

6"

1-1/2"3"4"

5-1/4"

1160-1021160-1031160-1041160-106

1160-2021160-2031160-2041160-206

.437 Diameter Bore, 7/8"-22 Internal Thread. For use with Palmer 7AA Industrials.


"S" Stem

Length


"T" Lagging

Extension


1/2" - 14 3/4" - 14

3-3/4"4-3/4"

6"

2"2-1/2"3-1/4"

1"1-1/2"

2"

1161-1031161-1041161-106

1161-2031161-2041161-206

"P" Diameter .840 1.05

C

Sanitary Thermowells

Projectile Wells: Series 26P

Model Number Length

"A" External

Taper Length

"B" TaperPerFoot

"C" Overall Length

"S"Stem

Length

"T" Clearance

Hole

"V" Theoretical

End ofTaper

26P397 9-1/8" 3-1/4" 3.062" 10-1/8" 9-49/64" 7-3/16" 9-21/32"

26P398 12-1/8" 3-3/4" 2.625" 13-1/8" 12-49/64" 10-3/16" 12-21/32"

1- 1/4

1/4

3/8

Sanitary Wells: Series 1128

Tri-Clamp Size

"A" Stem

LengthPart Number


"B" Flange

Diameter

1-1/2"

2-1/2"4"6"9"

1128-152-051128-154-051128-156-051128-159-05

1-5/8"2-1/2"4-1/2"7-1/2"

1.984"

2.0"

2-1/2"4"6"9"

1128-202-051128-204-051128-206-051128-209-05

1-5/8"2-1/2"4-1/2"7-1/2"

2.516"

2-1/2"

2-1/2"4"6"9"

1128-252-051128-254-051128-256-051128-259-05

1-5/8"2-1/2"4-1/2"7-1/2"

3.047"

3.0"

2-1/2"4"6"9"

1128-302-051128-304-051128-306-051128-309-05

1-5/8"2-1/2"4-1/2"7-1/2"

3.579"

Projectile Thermowells .437" Diameter Tapered Bore, .180" Taper per foot, 1-1/4"-18 NEF Internal Thread. For use with Industrials and Cleanliner Thermometers, and Digi-Stem 5/8" diameter with 1-1/4"-18 NEF.


• All 316L Stainless Steel Construction• Exceeds 3A #4 Finish• Fast Installation & Removal from Process• Food Processing• Beverage Industry• Pharmaceutical Processing

.260" Diameter Bore, 1/2"-14 NPT Internal Thread. For use with All Sanitary Thermometers.

04/11 PW1100



117 SeriesTest Thermowells

& Protection Tubes117 Series Test Thermowells


"S" Stem

Length


"T" Lagging

Extension


1/2" - 14 3/4" - 14 1" - 11-1/2

6"9"

12"15"18"24"

2-1/2"4-1/2"7-1/2"10-1/2"13-1/2"19-1/2"

2"3"3"3"3"3"

1171-1061171-1091171-1121171-1151171-1181171-124

1171-2061171-2091171-2121171-2151171-2181171-224

1171-3061171-3091171-3121171-3151171-3181171-324

Protection Tubes: Series 1178


Schedule Wall

Thickness


1/2"-14 3/4" - 14 1" - 11-1/2

4"6"8"10"12"

4040404040

1178-1041178-1061178-1081178-1101178-112

1178-2041178-2061178-2081178-2101178-212

1178-3041178-3061178-3081178-3101178-312

"D" Dia .840 1.050 1.315

"I" Dia .622 .824 1.049


"S" Stem

Length



1/2" - 14 3/4" - 14 1" - 11-1/2

4"6"9"

12"15"18"24"

2-1/2"4-1/2"7-1/2"10-1/2"13-1/2"16-1/2"22-1/2"

1170-1041170-1061170-1091170-1121170-1151170-1181170-124

1170-2041170-2061170-2091170-2121170-2151170-2181170-224

1170-3041170-3061170-3091170-3121170-3151170-3181170-324

Heavy Wall Regular: Series 1172

"S" Stem Length


4"6"9"12"15"18"24"

2-1/2"4-1/2"7-1/2"10-1/2"13-1/2"16-1/2"22-1/2"

1172-3041172-3061172-3091172-3121172-3151172-3181172-324

Heavy Wall - Lagging Extension: Series 1173

"S" Stem Length


"T" Lagging Extension Type Number

6"9"12"15"18"24"

2-1/2"4-1/2"7-1/2"

10-1/2"13-1/2"19-1/2"

2"3"3"3"3"3"

1173-3061173-3091173-3121173-3151173-3181173-324

.437" Diameter Bore, 1/2"-14 NPS Internal Thread, Protection Tubes: 1" Diameter Bore.For use with #20 Gauge T/C Elements.

1.0625 DIA 1.0625 DIA

I

Protection Tubes: Series 1179


Schedule Wall

Thickness


1/2"-14 3/4" - 14 1" - 11-1/2

4"6"8"

10"12"

8080808080

1179-1041179-1061179-1081179-1101179-112

1179-2041179-2061179-2081179-2101179-212

1179-3041179-3061179-3081179-3101179-312

"D" Dia .840 1.050 1.315

"I" Dia .546 .742 .957

.437 Diameter Bore, 7/8"-22 Internal Thread. For use with Palmer 7AA Industrials.


117 Series Protection TubesFor use with Palmer Bimetals, 1035 & 1050 Dials,

81 Series Bulbs, #20 Gauge T/C Elements.

04/11 PW1100



I

118 Series Vanstone & Test

Thermowells118 Vanstone & Test Thermowells

Vanstone: Series 1181

"S" Stem Length


4"6"9"12"15"18"24"

2"4"7"

10"13"16"22"

1181-0041181-0061181-0091181-0121181-0151181-0181181-024


"S" Stem

Length



3/4" - 1.050 1" - 1.315

4"6"9"12"15"18"24"

2-1/2"4-1/2"7-1/2"

10-1/2"13-1/2"16-1/2"22-1/2"

1186-2041186-2061186-2091186-2121186-2151186-2181186-224

1186-3041186-3061186-3091186-3121186-3151186-3181186-324



4"6"9"12"15"18"24"

2-1/2"4-1/2"7-1/2"10-1/2"13-1/2"16-1/2"22-1/2"

1187-0041187-0061187-0091187-0121187-0151187-0181187-024


"S" Stem Length


4"6"9"12"15"18"24"

2"4"7"10"13"16"22"

1180-0041180-0061180-0091180-0121180-0151180-0181180-024

Heavy Wall Weld-In: Series 1183

"S" Stem

Length


"P" Diameter Nominal Pipe Size

3/4" - 1.050 1" - 1.315

6"9"12"15"18"24"

4-1/2"7-1/2"10-1/2"13-1/2"16-1/2"22-1/2"

1183-2061183-2091183-2121183-2151183-2181183-224

1183-3061183-3091183-3121183-3151183-3181183-324

"I" Dia 1" 1.065"


"S" Stem Length


4"6"9"12"15"18"24"

2"4"7"10"13"16"22"

1182-0041182-0061182-0091182-0121182-0151182-0181182-024

.260, .385, .437 Diameter Bore, 1/2"-14 NPS Internal Thread.For use with: Digi-Stem 1/4" diameter with 1/2" NPT, (1181 Series) and 3/8" diameter with 1/2" NPT Probes (1182 Series).



04/11 PW1100



Union Connection Fittings Series

112, 114 & 115Union Connections

Union Connections

"P" NPT Type Number

3/4" - 141"-11-1/2

1120-71120-8

Union Connections

"P" NPT"C" Thread

7/8-22NS 1-1/4" - 18 NEF

3/4"-141"-11-1/2

1150-71150-8

1140-71140-8

"F" DIM 9/16" 13/16"

Lagging Union Connections

"P" NPT"C" Thread

7/8-22NS 1-1/4" - 18 NEF 1/2"-14 NPS

3/4"-141"-11-1/2

1151-71151-8

1141-71141-8

1121-71121-8

"F" DIM 9/16" 13/16" 3/4"

Flanged Unions

"C" Thread

7/8-22NS 1-1/4" - 18 NEF

1150-9 1140-9

Flanged Lagging Union Connections

"C" Thread

7/8-22NS 1-1/4" - 18 NEF

1151-9 1141-9

1151-9 & 1141-9 Series Fittings have been DISCONTINUED

Flanged Unions

"P" NPT Type Number

1/2" - 14 1120-9


Flanged Union Connections

Lagging Union Connections Flanged Lagging Union Connections

Testing Services for Thermowells • Certified Drawings • Full Penetration Flanged Wells • Teflon Coated Wells (limit to 12") • X-ray of Well

• Dye Penetrant Test• Mill Test Report (Material Certificate) (at time of order)• Hydrostatic Internal Test (including Certificate)

1121-9 - has been discontinued

04/11 PW1100

America's First Manufacturer of Precision Industrial Temperature and Pressure Instrumentation

Calibration Services

Choose from two levels of calibration services to choose from to meet your quality system requirements.

STANDARD CERTIFICATION: Unit is calibrated to factory specifications using NIST traceable equipment. Unit is provided with:

Certificate of Conformance*- Statement that our product meets published specifications. Included when you buy a new product.

Calibration Sticker*- (or tag) Advising you of the date your instruments was/were calibrated, and the suggested date for its next calibration. This is provided when you buy a new product and when you return a product for calibration. (*Most Products)

NIST TRACEABLE TEST REPORT: Unit is calibrated to factory specifications using NIST Traceable equipment. Unit is provided with:

NIST Traceable Test Report - Our quality Management system is certified to conform to ISO9001:2000. We maintain a calibration system in conformance with ANSI/NCSL Z-540 and MIL-STD-45662A.

"Before" and "After" Data with Out of Tolerance conditions noted.

Calibration Sticker (see above).

REGISTER YOUR PRODUCT: Registration is fast and easy. In about a minute you can register your product for Warranty Protection and our Calibration Reminder Service to keep your QC Program in compliance. Go to www.palmerwahl.com/register.

REPAIR SERVICES: Palmer Wahl offers repair and calibration services on most products we sell. Contact Customer Service for pricing, and an RMA. Please see note below.

Detailed Repair Report - Available upon request, this report provides details of evaluation and repairs made.

Custom Points - Palmer Wahl will calibrate your instruments at your specified temperatures.

Special Requests - When calibrating your instrument, our experienced personnel will help you to achieve the level of quality that you need in your facility.

Note: You must have a Return Merchandise Authorization Number (RMA) before returning a product for repair or calibration. To obtain an RMA, please call Customer Service at 1-800-421-2853, or go to www.palmerwahl.com and click on Service > Product Return Request.

Repair and Other Services

Palmer Wahl Warranty

Manufacturer warrants all products listed in this catalog to be free from

defects in material or workmanship under normal use and service.

The Manufacturer agrees to repair or replace any product which upon

examination is revealed to have been defective due to faulty workmanship

or material if returned to our factory, transportation charges prepaid,

within the product specific warranty period stated in the catalog by the

manufacturer. This warranty is in lieu of all other warranties, expressed

or implied and of all obligations or liabilities on its part for damages

including but not limited to consequential damages, following the use or

misuse of instruments sold by the Manufacturer. No agent is authorized to

assume for manufacturer any liability except as set forth above.

234 Old Weaverville Road • Asheville, North Carolina • 28804-1260Phone: 800-421-2853 • 828-658-3131 • Fax: 828-658-0728 • Email: [email protected]

www.palmerwahl.com

Palmer Thermowells are distributed by:

• Increase customer satisfaction with consistent products.

• To comply with quality standards.

• Improve product quality.

• Ensure traceability throughout your entire manufacturing process.

• Palmer Wahl offers a complete line of Calibrators to integrate all the necessary functions for adjustment and maintenance of your process.

• Our products are easy to use and Palmer Wahl is there to help, every step of the way.

Why You Need to Calibrate your Instruments

PW1100 - Specifications Catalog 04/11

Wahl Designs and manufacturers to the most stringent quality standards. We provide certified, traceable calibration data in support of companies whose requirements include meeting ISO 9000, FAA and FDA quality standards. Calibrations to both IPTS-68 and ITS-90 are available.

full thermowell catalog

Documents