fusion fh/fhr-145 remote pan and tilt heads...fusion fh/fhr-145 remote pan and tilt heads vinten...
TRANSCRIPT
Fusion FH/FHR-145 Remote Pan and Tilt Heads
Vinten Radamec™A Vitec Group brand
Fusion FH/FHR-145 Rem
ote Pan and Tilt Heads
Technical Datasheet
260
mm
(10.
2”)
30 m
m (1
.2”)
90 m
m (3
.5”)
90 m
m (3
.5”)
10.5 mm (0.413”)40 mm (1.575”)
436 mm (17.2”) 195 mm (7.6”)
94.5 mm (3.7”)
490
mm
(19.
3”)
375.
15 m
m (1
4.8”
)
Adju
stab
le 2
49 m
m to
537
mm
(9.
8” to
21.
1”)
319.3 mm (12.6”)
235 mm (9.3”)
1
2
3
4
5
8 6
6
7
9
9
10
11
12
14
13
Technical Datasheet
Key:1. Tilt Lock2. Communication Status 3. Genlock Status4. Fuse Holder 250V AC T3.15A5. Tilt Auto / Manual select (FH-145 only) 6. Drag adjustment (FH-145 only)7. Pan Auto / Manual select (FH-145 only)8. Power Switch9. Mains (inlet and outlet)10. Network11. Aux Port12. Lens control port13. Mitchell Adaptor Slot14. Mounting Holes 4 x 3/8" BSW on
111 mm / 4.375" PCD
Fusion FH/FHR-145 Rem
ote Pan and Tilt Heads
Technical Datasheet
Technical Specification
FH-145 FHR-145
Part number V4101-0001 V4102-0001
Dimensions H: 490 mm L: 436 mm W: 260 mm / H: 19.3 in L: 17.2 in W: 10.2 in
including cradle - W: 260 mm / 10.2 in
Weight 28.4 kg / 62.6 lbs 24.3 kg / 53.5 lbs
Pan range 720º
Tilt range ±90º
Payload 65 kg / 145 lbs
Rated load inertia 7.5 kgm2 / 178 lb f2
Speed 0.01 to 60º / sec
Max. acceleration 120º / sec2
Accuracy 60 arc sec
Positional Resolution 22-bit, 4.194mil counts per 360º
Temp range
Operating 5-50ºC, 90% humidity non condensing
Storage -40 to +60ºC
Compatible controllers Vinten Radamec VRC, CP4 and LCS Vinten Radamec VRC, CP4 and LCS
Robotic / Manual mode Yes No (Robotic only)
Changeover Pan and tilt changeover controls n/a
Drag 5 fluid drag settings, plus zero n/a
Tilt axis lock Yes
Cable restraint Small and large brackets supplied
Mounting Vinten 4-bolt and Quickfix mountings
Mitchell mounting (adaptor required)
Power
Rating 100-240V AC Autoranging, 50/60Hz, 175W
Switch Illuminated push button, dimmable
Connectivity Neutrik powerCON TRUE1 inlet and outlet
Lens control Full-servo Canon and Fujinon lenses
Aux port
Serial port 1x RS232 / 422
Power 12V DC, 30W
GPIO 4 DIO lines, individually assignable as input or output
Connectivity Female HDB26 socket
Network IP Ethernet, RJ45
Genlock Black burst / tri-level, BNC
CCU control Option
VR tracking data output Option, Ethernet UDP or Serial RS232 / 422
Vinten RadamecWilliam Vinten Building, Western Way, Bury St EdmundsSuffolk IP33 3TB United Kingdom
T: +44 (0)1284 776700 (UK) T: +1 845 268 0100 (USA)
VRFH-145TeLit14
www.vintenradamec.comVinten Radamec™A Vitec Group brand
Technical specifications are subject to change without notice.Vinten Radamec reserves the right, without notice, to make changesin equipment design or performance as progress in engineering,manufacturing or technology may warrant.