fußschalter_7000000787_gb
DESCRIPTION
Italy Bernstein S.r.l. Via del pero 12a/b I-24040 Levate (BG) Phone +39 035 4549037 Fax +39 035 4549647 [email protected] Netherlands Bernstein BV Tieloser Weg 6 D-32457 Porta Westfalica Phone +31 314 366088 Fax +31 314 361256 [email protected] France Bernstein S.A.R.L. Tieloser Weg 6 D-32457 Porta Westfalica Phone +33 1 64 66 32 50 Fax +33 1 64 66 10 02 [email protected] ■ C2 – Smallest switch for safety applications ■ I88 – switch standardised in keeping with DIN EN 50047TRANSCRIPT
International HeadquartersGermanyBernstein AGTieloser Weg 6D-32457 Porta WestfalicaPhone +49 571 793-0Fax +49 571 [email protected]
FranceBernstein S.A.R.L.Tieloser Weg 6D-32457 Porta WestfalicaPhone +33 1 64 66 32 50Fax +33 1 64 66 10 [email protected]
DenmarkBernstein A/SSindalsvej 30DK-8240 RisskovPhone +45 7020 0522Fax +45 7020 [email protected]
NetherlandsBernstein BVTieloser Weg 6D-32457 Porta WestfalicaPhone +31 314 366088Fax +31 314 [email protected]
ItalyBernstein S.r.l. Via del pero 12a/bI-24040 Levate (BG)Phone +39 035 4549037Fax +39 035 [email protected]
Great BritainBernstein Ltd (UK)Unit 1, Westgate ParkTintagel Way WestgateAldridgeWest MidlandsWS9 8EXPhone +44 1922 744999Fax +44 1922 [email protected]
AustriaBernstein GmbH Kurze Gasse 3A-2544 LeobersdorfPhone +43 2256 62070-0Fax +43 2256 [email protected]
ChinaBernstein Safe Solutions (Taicang) Co., Ltd. North 38, Dongting Road, Taicang CityDevelopment Area,Taicang 215400Jiangsu Provice, P.R. ChinaPhone +86 512 81608180Fax +86 512 [email protected]
SwitzerlandBernstein (Schweiz) AGSteinhaldenstrasse 14CH 8954 GeroldswilPhone +41 44 775 71 71Fax +41 44 775 71 [email protected]
HungaryBernstein Kft.Fehér utca 101106 BudapestPhone +36 1 434 2295Fax +36 1 434 [email protected]
w w w . b e r n s t e i n . e u
Other switching technology in the Bernstein range
Foot switches
Sure-footed Safety
700.
0000
.787
11.
2007
· w
ww
.har
twig
-at.d
e · S
ubje
ct t
o m
odifi
catio
ns
Foot control terminal
■ FBT2 – Hygienic design for use in
medical technology
■ FBT1– Hygienic design for use in
medical technology– Plastic contact housing
■ Ti2– optimised component size
retaining the standardconnection techniques withtype of protection IP 65
■ ENK– switch standardised in
keeping with DIN EN 50041
– metal actuators
Plastic encapsulated
■ C2– Smallest switch for safety
applications
■ IF – ultra-flat and flexible with
type of protection IP 67– metal actuators
■ I88– switch standardised in
keeping with DIN EN 50047
■ Bi2– two cable entries
M 16 x 1.5
■ ENM2– switch standardised in
keeping with DIN EN 50041
Metal encapsulated
■ GC– slim-line construction
■ D– heavy-duty metal housing
for arduous applications
■ SN2– three cable entries
M 20 x 1.5
Tailor-made for your applications – the modular foot switch concept from Bernstein!Bernstein offers a wide range of foot switches to meet the exacting requirementsfound in industrial applications. With up to three pedals, with or without a safetycover (UN), the robust all-metal housing ensures a protection class of IP 65 as standard.The modular design gives you the possibility of defining application-dependent pedalfunctions with up to four contact combinations per pedal.
Additional contact combinations and pedal functions, combined with basic housings andswitching elements open up further control and operation variants. Complete units are alsoavailable for use in the explosion-protected area II 2G EEx d IIC T6 and the medical sector.Prefabricated foot switches are available on request.
Type Pedal 1 Pedal-independentaddition
F1 – Switching Additional Schalt- Zusatz- Schalt- Zusatz- Featureselements function einsatz funktion einsatz funktion
FG – Switching Additional Schalt- Zusatz- Schalt- Zusatz- Featureselements function
Pedal 2
F2 – Switching Additional Switching Additional Schalt- Zusatz- Featureselements function elements function einsatz funktion
Pedal 3
F3 – Switching Additional Switching Additional Switching Additional Featureselements function elements function elements function
Example
F3 – U1 SU1 Y U2 D UN
Additional functions
Latched switching YAfter the first pedal actuation, the contactsetting is maintained after the pedal isreleased. Only after a subsequent actuation is the contact reset again (bistable).
Pressure point D– Depression to the pressure point:
First pair of contacts switched– Depression beyond the pressure point:
Second pair of contacts switched (first contacts remain switched)
Features
Safety Guard (UN)Additional to protecting the pedal, the rear of the guard provides further space to accommodate additional elements:– Emergency Stop button– Contactor on DIN rail (as main power
switch)– Customer-specific fittings
Emergency Stop button (NA)Since the foot switch can be operated atsome distance from machines and plant, anEmergency Stop button conforming toVDE/DIN is directly available to the operatoron the command unit.
Pedal interlock (AT)The pedal can only be depressed after thevertical lever is disengaged with the foot. This prevents unintentional actuation of thefootswitch.
1. Rest2. Operation: Pedal pressed as far as the pressure point: the make
contacts are closed, the machine is started.3. Emergency situation: The pedal is depressed beyond the resistance
of the pressure point, the NC contact is interrupted and latched,(machine is stopped). Even when the pedal is released the contactis latched and remains in the off position. This reliably prevents anuncontrolled restart of the moving machine parts.
4. Disengagement: After the hazardous situation hasbeen remedied, manual disengagement (push -button on the side of the housing) releases thecontacts; the machine can then be initiated againby pressing the pedal as in pos. 2.
Safety foot switch with safety locking and manual disengagement
Basic types
F1: 1-pedal with / without safety cover (UN)F2: 2-pedal with / without safety cover (UN)F3: 3-pedal with / without safety cover (UN)
F1
F2
F3
Basic contact elements
U1Z 1NC/1NO slow make/break
SU1Z 1NC/1NO snap-action
U2Z 2NC/2NO slow make/break
SU2Z 2NC/2NO snap-action
SU1Z/UV1 DUN 1NC/2NO safety switching function
Safety switching function with pressure point, contact latch,manual disengagement and safety cover (see details below).
SU1Mi RG 1NC/1NO change-over with potentiometer
An integrated potentiometer allows linear control tasks to beperformed via a controller, dependant on the pedal position. A micro-switch is also activated, providing electrical isolation atthe rest or end position (facility exists for a further micro-switchto duplicate this function).