futaba vfd modules, the lcd emulators. · 2019. 8. 28. · futaba lcd emulators are compact, low...
TRANSCRIPT
Futaba VFD modules, the LCD EMULATORS.
Futaba LCD EMULATORS are compact, low power VFD modules designed toreplace industry standard LCD modules. Our VFD modules have superiorfeatures that will enhance your system’s appearance and performance. AllFutaba LCD EMULATORS have a standard LCD interface, a CPU with anintegrated character generator, driver ICs, and a DC-DC/AC converter. A dual port RAM allows data and instructions to be sent to the modulecontinuously. As an option, each module may be configured by the userto have an Intel I80 parallel interface or a synchronous serial interface.
5 x 8 Dot Matrix
Parallel and SynchronousSerial Interfaces
Excellent Contrast
Low Power Consumption
Wide Temperature Range(-40°C to +85°C)
Self-Illuminating, NoBacklight Required
Wide Viewing Angle
8 User Definable Characters
Various Colors Using Filters
4 Luminance Levels
Busy Bit Always Zero
External or Internal Reset
English-Katakana or English-European Font
Excel with Futaba LCD EMULATORS!
Futaba LCD EMULATORS
Module Rows x Character Character Module Typical Power LuminanceNumber Characters Format Height Dimensions
NA16SD08 1 x 16 5 x 8 5.34 mm 80 x 36 x 18.7 mm 5 V, 65 mA 500 cd/m2
NA162SD07 2 x 16 5 x 8 5.34 mm 80 x 36 x 18.7 mm 5 V, 120 mA 500 cd/m2
NA202SD16 2 x 20 5 x 8 5.34 mm 116 x 37 x 18.7 mm 5 V, 140 mA 500 cd/m2
NA202MD15 2 x 20 5 x 8 8.86 mm 146 x 43 x 19.2 mm 5 V, 310 mA 500 cd/m2
NA242SD04 2 x 24 5 x 8 5.34 mm 118 x 36 x 16.5 mm 5 V, 155 mA 500 cd/m2
NA204SD02 4 x 20 5 x 8 4.84 mm 100 x 60 x 20.6 mm 5 V, 300 mA 500 cd/m2
NA402SD10 2 x 40 5 x 8 5.34 mm 182 x 33.5 x 18.7 mm 5 V, 220 mA 500 cd/m2
For trouble free replacement of LCD modules.
General Specifications
Read Cycle TimingWrite Cycle Timing
Motorola M68 Interface Timing Block Diagram
RS
R/W
E
DB0-DB7
VCC
GND
DOT MATRIX
VFD
CONTROLLER
AND DRIVER
VACUUM
FLUORESCENT
DISPLAY
DC-DC/AC
CONVERTERNote• All times are specified using 20% and 80% of Vcc as the reference
points.• For an Intel I80 parallel interface or a synchronous serial interface,
please contact Futaba.
Item Symbol Min. Typ. Max Unit RemarksSupply Voltage Vcc 4.5 5.0 5.5 V
Supply Current Icc – – – – See Page 3
Luminance L 350 500 – cd/m2 Green, 505 nm
Operating Temperature Topr -40 – +85 °C
Storage Temperature Tstg -55 – +85 °C
Operating Humidity Hopr 20 – 85 % RH Without condensation
Storage Humidity Hstg 20 – 90 % RH Without condensation
Vibration – – – 4 G 1.5 mm, 10–55 Hz sine wave1 min./cycle, 2 hrs./axis (X, Y, Z)
Shock – – – 40 G 11 ms, half sine wave3 times/axis (X, Y, Z, -X, -Y, -Z)
Item Symbol Min. Max UnitRS, R/W Setup Time tAS 20 – ns
RS, R/W Hold Time tAH 10 – ns
Input Signal Rise Time tr – 15 ns
Input Signal Fall Time tf – 15 ns
Enable Pulse Width High PWEH 230 – ns
Enable Pulse Width Low PWEL 230 – ns
Write Data Setup Time tDS 80 – ns
Write Data Hold Time tDH 10 – ns
Enable Cycle Time tcycle 500 – ns
Read Data Delay Time tDD – 160 ns
Read Data Hold Time tDHR 5 – ns
English–EuropeanEnglish–Katakana
Instructions
Character Font Tables
Instruction RS R/W DB7 DB6 DB5 DB4 DB3 DB2 DB1 DB0Clear Display 0 0 0 0 0 0 0 0 0 1Cursor Home 0 0 0 0 0 0 0 0 1 xEntry Mode Set 0 0 0 0 0 0 0 1 I/D SDisplay On/Off Control 0 0 0 0 0 0 1 D C BCursor/Display Shift 0 0 0 0 0 1 S/C R/L x xFunction Set* 0 0 0 0 1 DL N x BR1 BR0CGRAM Address Set 0 0 0 1 CGRAM AddressDDRAM Address Set 0 0 1 DDRAM AddressAddress Counter REad 0 1 BF=0 AC ContentsDDRAM or CGRAM 1 0 Write DataDDRAM or CGRAM 1 1 Read Data
I/D = 1 : Increment I/D = 0 : Decrement N = 1 : Multiple lines N = 0 : Single lineS = 1 : Shift enabled S = 0 : Shift disabled D = 1 : Display is on D = 0 : Display is offS/C = 1 : Display shift S/C = 0 : Cursor move C = 1 : Cursor is on C = 0 : Cursor is offR/L = 1 : Shift to the right R/L = 0 : Shift to the right B = 1 : Blinking enabled B = 0 : Blinking disabledDL = 1 : 8 bits DL = 0 : 4 bits
DDRAM = Display Data RAM CGRAM = Character Generator RAM
[BR1,BR0] = [0,0] : 100%; [0,1] : 75%; [1,0] : 50%; [1,1] : 25%
* Note: The instructions shown above are compatible with the Hitachi HD44780U LCD controller IC, with the exception of the added luminance control bits(BR1, BR0) in the Function Set instruction.
Module Dimensions
• Character font option is either English-Katakanaor English-European. This option is factory setand cannot be changed by the user.
• Interface option is either Motorola M68 parallel,Intel I80 parallel, or synchronous serial. Thisoption may be configured by the user or pre-configured by Futaba for large orders.
• Connector option is either no connector,unshrouded header, or customer specified.
• Reset option is either internal or external. Thisoption may be configured by the user or pre-configured by Futaba for large orders.
• Standard module default configuration isMotorola M68 parallel interface, no connector,and internal reset.
• RoHS option available.
• Please read the Product Specification carefullybefore using your Futaba LCD EMULATORS.
• The power supply should be disconnected orswitched off before handling the modules.
• The modules contain electronic components thatgenerate high voltages which may cause anelectric shock.
• Anti-static precautions should be observed whenhandling the modules.
• The VFD used on the module is made of glass andshould be handled with care.
Safety Information
Options
Futaba Corporation of America reserves the right to makechanges without further notice to any product herein toimprove reliability, function, or design. Please contact Futabafor the latest information.
Module Number: NA16SD08 Unit: mm
Module Number: NA162SD07 Unit: mm
Part Number: NA2425D04AA/BA Unit: mmCharacter size: 2.167 (W) x 5.34 (H) mmPower consumption: 850 mW typ. (Vcc = 5 V, lcc = 170 mA)
1.15 W max.Module Number: NA202SD16 Unit: mm
Module Number: NA202MD15 Unit: mm
Module Number: NA242SD04 Unit: mm
Module Number: NA204SD02 Unit: mm
Module Number: NA402SD10 Unit: mm
Part Number Key Connector Interface
Module Dimensions
Pin Symbol
1 GND
3 NC or RST/
5 R/W
7 DB0
9 DB2
11 DB4
13 DB6
15* NC
Pin Symbol
2 Vcc
4 RS
6 E
8 DB1
10 DB3
12 DB5
14 DB7
16* NC
* If applicable.
Futaba Corporation of America Schaumburg, IL
PART NUMBER: REVISION:
CIG LCD EMULATORS A DATE PRINTED: SHEET:
12May15 10 OF 14
4.0 PART NUMBER CROSS REFERENCE
CIG LCD Emulator Part Number Conventional LCD Emulator Part Number
M162MD06AA-### M162MD05AJ/FJ/GJ/KJ
M162MD07AA=### M162MD05AA/FA/GA/KA
M162SD53AA-### M162SD07AJ/FJ/GJ/KJ
M162SD54AA-### M162SD07AA/FA/GA/KA
NA162SD53AA-### NA162SD07BA-###
NA162SD54AA-### NA162SD07AA-###
M202MD32AA-### NA202MD15BA-### & M202MD15AJ/FJ/GJ/KJ
M202MD33AA-### NA202MD15AA-### & M202MD15AA/FA/GA/KA
M202SD22AA-### NA202SD16BA-### & M202SD16AJ/FJ/GJ/KJ
M202SD23AA-### NA202SD16AA-### & M202SD16AA/FA/GA/KA
M204SD08AA-### NA204SD02BB-### & M204SD02AJ/FJ/GJ/KJ
M204SD09AA-### NA204SD02AB-### & M204SD02AA/FA/GA/KA
M402SD62AA-### NA402SD10BB-### & M402SD10AJ/FJ/GJ/KJ
M402SD63AA-### NA402SD10AB-### & M402SD10AA/FA/GA/KA
06/08Futaba is ISO-9001 accredited © 2008 Futaba Corporation of America
Futaba Corporation of America711 East State Parkway • Schaumburg, Illinois 60173800-930-4757 • 847-884-1444 • Fax 847-884-1635http://www.futaba.com