fyp
TRANSCRIPT
![Page 1: fyp](https://reader030.vdocuments.net/reader030/viewer/2022020803/551e619a497959de398b4909/html5/thumbnails/1.jpg)
PPK MEKATRONIK UniMAP
Final Year Project Proposal
Session 2009/2010
Supervisor Name: ZULKARNAY BIN ZAKARIA
No Project Title/Student Project Overview Scope of Project Expected Outcome List of component (Hardware/Software)
Estimated
Budget /Lab
Involved
1
Fundamental Study of Magnetic Induction System Using Hall Effect Sensors
Application
No. of Student : 2 persons
Magnetic Induction Tomography
(MIT) is among the best growing
technology in tomography
application because of several
advantages. But the research on
the hall effect sensor
applications in this field is still
low.
1. This project will cover the hardware and software system of Magnetic Induction using hall effect sensors.
2. The hardware development consists of magnetic coils, transmitter and receiver circuit and also the microcontroller.
3. The software part consist of GUI development which capable communicate, capture and store the data generated by the hall effect sensor from the hardware part
4. The software part also involved in Development of suitable algorithm for image reconstruction
1. A hardware system which is
capable of generate the
magnetic field that can
detect by the hall effect
sensor
2. Graphical user interface
using VB as a tool to capture
and store the value capture
by the hall effect sensor
3. Analysis of the performance
for both hardware and the
software
Hardware:
1) Magnetic coil
2) Hall effect sensor
3) Other electronic components
4) SK40B
5) ICSP programmer
6) AC-DC adapter 7) USB- serial converter
Software:
1. VB
2. MPLAB IDE
Hardware:
RM 100
RM 50
RM 120
Research Grant
Research Grant
Research Grant
Research Grant
Bioinstrumentation Lab
Bioinstrumentation Lab
Total Cost: RM270
2
Fundamental Study and analysis of magnetic coil properties in Magnetic Induction Tomography
No. of Student : 1 person
In Magnetic Induction
Tomography (MIT) application,
the needs of having the best
spec of magnetic coil are very
important since this is among
the factors that will provide the
best image reconstruction of the
object that is going to be
1. This project consist only FEMM software application.
An analysis of several types of
magnetic coil properties such
as number of turns, types of
wire, diameter and etc in
generating the best
performance of a magnetic
induction system for a given
measurement distance.
Software:
FEMM software
Bioinstrumentation Lab
![Page 2: fyp](https://reader030.vdocuments.net/reader030/viewer/2022020803/551e619a497959de398b4909/html5/thumbnails/2.jpg)
PPK MEKATRONIK UniMAP
scanned.
3
Fundamental Study and modeling of magnetic field
using FEM
No. of Student : 1 person
Co-supervisor : En. Khairul
Salleh
FEM is among the method that
are use in magnetic field
modeling and analysis. It is
capable of providing magnetic
field strength properties for
analysis.
1. This project consist
only ANSYS/ other
related software
application.
2. The student has to do
the study on the
fundamental theory of
magnetic field.
3. Then analysis of the
certain given
magnetic field
parameters are done.
A FEM model for a given
magnetic field properties or
equation
Software:
ANSYS software or
other related software
Bioinstrumentation
Mechanical Design
Lab
4
Fundamental study of Magnetic Flux Leakage
(MFL) Diagnosis System
No. of Student : 1 person
MFL is among the current
application in oil and gas pipe
diagnosis system in Malaysia
and also in the world. It applies
the flux leakage properties for
the crack detection inside the
metal pipe.
1. This project covers
both hardware and
software systems with
the application of hall
effect sensors
2. The student has to
develop the system
which consist of
magnetic coil,
transmitter and
receiver circuit and
also the
microcontroller.
3. The hall effect sensor
will detect the MFL
strength and will
determine whether
there is a crack or not
on the scanned metal
block.
1. A system which
capable of generating
magnetic field
strength up to certain
given distance
2. A system which is
capable of detecting
the MFL up to certain
given distance
3. Analysis of the
capability of the
system to detect
crack on the metal
block
Hardware:
1) Magnetic coil
2) Hall Effect sensor
3) Other electronic components
4) SK40B
5) ICSP programmer
6) AC-DC adapter
7) USB- serial converter
8) Gauss meter
Software:
3. VB
4. MPLAB IDE
RM 100
RM 50
RM 120
Research Grant
Research Grant
Research Grant
Research Grant
Bioinstrumentation
Lab
Bioinstrumentation
Lab
Bioinstrumentation
Lab
Total Cost: RM270
![Page 3: fyp](https://reader030.vdocuments.net/reader030/viewer/2022020803/551e619a497959de398b4909/html5/thumbnails/3.jpg)
PPK MEKATRONIK UniMAP
5
Fundamental study of low cost Pulsed Electromagnetic Therapy Generator (PETG)
No. of Student : 1 person
Pulsed electromagnetic therapy
has been proved of capable in
helping the patient of stroke,
migraine, cancer, arthritis and
several others.
1. The student have to
study the suitable
spec for the PETG for
a certain suitable
depth of the signal
penetration to the
human body
2. Development of the
basic system which
consist of magnetic
coil, transmitter,
microcontroller and
other related circuits.
3. Analysis of the
system performance
1. A system which
capable of generating
magnetic field
strength that can
penetrate human
body up to certain
given distance and
with the frequency
that is not harm the
human body
2. An analysis of the
PETG performance
whether it is suitable
or not for human
application
Hardware:
1) Magnetic coil
2) Hall Effect sensor
3) Other electronic components
4) SK40B
5) ICSP programmer
6) AC-DC adapter
7) USB- serial converter
8) Gauss meter
Software:
5. VB
6. MPLAB IDE
RM 100
RM 50
RM 120
Research Grant
Research Grant
Research Grant
Research Grant
Bioinstrumentation
Lab
Bioinstrumentation
Lab
Bioinstrumentation
Lab
Total Cost: RM270