g-class vessels · gantry crane vital measurements distance between crane legs d1 13,95 m max drift...
TRANSCRIPT
G-class vessels
Main dimensionsLOA: 197,80 m Depth Mld: 16,25 m Cargo hold cap.: 47.646 m3 (grain)
LPP: 188,50 m Draught ext.: 11,717 m Cargo hold cap.: 47.334 m3 (bale)
Bredth Mld. 29,40 m Max air draught: 46,30 m
CLASS NOTATION: +1A1, General Cargo Carrier HC - E E0 v1. NOTE! Information given in this booklet is reflecting the situation at the time being created, Oct 2012.
Hold No.1
Hold No.2
Hold No.3
Hold No.4
Hold No.5
Hold No.6
Hold No.7
Hold No.8
Hold No.9
Hatch No.1
Hatch No.2
Hatch No.3
Hatch No.4
Hatch No.5
Hatch No.6
Hatch No.7
Hatch No.8
Hatch No.9
Hold No.10
Hatch No.10
Vessels Particulars
Owners: Grieg International II AS / Grieg Shipping II AS Management: Grieg Star Operator: Grieg Star
Nationality: Norway (NIS) Port of registry: Bergen Deadweight: 43.712 mt Gross ton: 27.192 mt Net ton: 12.918 mt Bale capacity: 47.334 m3 Number of holds: 10 Speed: 14,50 knots
General description: Open hatch general cargo carrier with 2 x 40 mt gantry cranes on deck and 10 box-shaped cargo holds intended for the carriage of baled pulp, ore, grain, cement, paper, packaged lumber and other solid bulk cargoes.
Containers arranged in holds and on deck. Max load on tank top: Holds nos 1, 3, 5 & 9: 26,2 mt/m2. Holds nos. 2, 4, 6, 8 & 10: 17,1 mt/m2.
Dehumidification system for all cargo holds.
Accommodation aft for a total of 31 persons. Water ballast in fore- and Aft peak tanks and in 12 tanks in double hull and double bottom. Hold No. 5 is ballast hold. Four HFO storage tanks in double bottom.
Painted surface: Hull (top side): 2.600 m2 Flat bottom: 4.200 m2 Vertical bottom: 4.000 m2
Deadweight & DraftZone Draft
(m)Deadweight
(mt)
Tropical fresh water
12,230 44.934
Fresh water 11,986 43.720
Tropical sea water
11,961 44.951
Summer 11,717 43.712
Winter 11,473 42.479
Deadweight Scale
Panama Canal Visibility
Water Ballast & Oil Tanks
Container Capacity
Max intake of 20 ft units with balance of 40 ft units (40ft units in brackets)
Container Capacity
Max intake 20ft units
COMPART-MENT
LOCATION FR. NO.
CAPACITY CENTER OF GRAVITY HATCH COVER
STRENGHT MT/M2
TANK TOP STRENGHT
MT/M2CUB. M CUB. FT MID. G (M)
KG (M)
NO. 01 HOLD 191 - 206 3.776,8 133.381 -70,14 10,50 3,00 26,20
NO. 02 HOLD 175 - 190 4.918,7 173.698 -56,72 9,87 3,00 17,10
NO. 03 HOLD 159 - 174 4.917,1 173.652 -43,16 9,87 3,00 26,20
NO. 04 HOLD 143 - 158 4.918,8 173.712 -29,77 9,87 3,00 17,10
NO. 05 HOLD 127 - 142 4.922,1 173.829 -16,02 9,87 3,00 26,20
NO. 06 HOLD 111 - 126 4.920,5 173.772 -2,32 9,87 3,00 17,10
NO. 07 HOLD 95 - 110 4.917,1 173.652 11,19 9,87 3,00 26,20
NO. 08 HOLD 79 - 94 4.917,1 173.652 24,68 9,87 3,00 17,10
NO. 09 HOLD 63 - 78 4.917,1 173.652 38,2 9,87 3,00 26,20
NO. 10 HOLD 47 - 62 4.521,5 159.681 51,68 10,36 3,00 17,10
TOTAL - 47.646,8 1.682.681
Cargo Holds
Cargo Hold Dimensions
Cargo Hold Tank Top
Main engine
One 6-cylinder 2 stroke single acting cross head marine diesel engine Type: Mitsui B&W 6S60MC MCR: 7546.5 KW at 104 RPM NCR: 6793.3 KW at 100.4 RPM Turbo charger: Mitsui MAN NA57
Diesel Generators
Three 6 cylinder 4 cycle single acting diesel engine Type: Daihatsu Diesel 6DL-24 Generator output: 800 kW at 720 rpm
Emergency Diesel Generator
Maker: Mitsui Deutz Generator output: 64 kW
Incinerator
One incinerator Sunflame type OSGI_50SA. 100.000 kcal/h capacity. Burning sludge oil and solid waste.
Air compressors
Two main air compressors: Type: Tanabe HC-265A Capacity: 154 m3/h capacity at 30 bar.
Service air compressor
One working air compressor
Type: Tanabe VLH 2114 Capacity: 400 m3/h capacity at 8 bar.
One emergency diesel air compressor Yanmar type: KSC3 Capacity: 4,5 m3/h at 30 bar.
Dehumidifiers Type: MA-3000-50-64E. 5.000 m3/hour capacity.
Boilers
Auxiliary Boiler, OSAKA Boiler Type: OEC-512 Steam production: 1.200 kg/h Working pressure: 7 kg/cm2
Bow thruster
Kawasaki heavy Ind. KT 130 B
Economizer
Exhaust gas economizer, MITSUI Type: Two-header bent tube forced circulation Steam production: 1.100 kg/h Working pressure: 9 kg/cm2
Fresh Water Generator
One fresh water generator Sasakura Type: AFGU-S61 Capacity: 36 tons/day
Purifiers and Separators
Two HFO purifiers, Alfa Laval type LFPX307 2.200 l/h capacity at 380 cSt.
Two M/E lube oil purifiers Alfa Laval type MOPX205 1.500 l/h capacity at 100 cSt.
One HEISHIN HMS-200, 15 ppm Bilge Separator 2 m3/h
One Westfalia Bilge Master 3.000. 3.000 l/hour.
Sewage Treatment Plant SASAKURA Eng. Co.
One marine sewage plant, Super Trident ST-4. 40 person capacity.
Gantry Cranes
2 x Mitsui Paceco make SWL: 40 mt Hoisting speed: 31/76 m/min at 40/12 mt Lowering speed: 38/76 m/min at 40/12 mtTrolley speed: 76 m/min Gantry speed 30 m/min Turn table rotation: 1 r.p.m. Outreach, from shipside: 8 m Clearance between legs: 13,95 m Auxiliary hoist cap. 6 mt
Gantry Crane vital measurements
Distance between crane legs D1 13,95 m Max drift to hatch cover H1 6,50 m Max drift to Cillbeam H2 (mid part) 6,40 m Max drift to hatch coaming H3 7,35 m
Cargo hold and deck arrangement
Benches ar fitted in hold 1 & 10 Cargo holds clear opening 24.66 m x 12,30 m Cargo hold height: 16,16 m Hatch cover size 26,64 m x 12,62 m.
Container Capacity
On hatch covers: 660 In holds: 852 Total: 1512