G Commands

• show glbp, page 2

• show glbp brief, page 8

• show glbp capability, page 10

• show guestshell, page 11

Cisco Nexus 3600 Series NX-OS Command Reference (Show Commands), Release 7.0(3)F3(1) 1

show glbpshow glbp [ vrf <vrf-name> ] [ interface <int-num> ] [ group <group-num> ] [ active | standby | disabled | init| listen ] + [ __readonly__ <show_glbp_start> { TABLE_grp_detail <sg_nsf_state> <sg_print_nsf_state><sg_nsf_end> <sg_if_index> <sg_group_num> <sg_state> <sg_state_reason> <sg_state_count><sg_state_last_change> <sg_vip> <sg_vip_attr> <sg_num_vip_sec> { TABLE_grp_vip_sec <sg_vip_sec><sg_vip_sec_attr> } <sg_vip_sec_end> <sg_active_addr> <sg_cur_hello> <sg_cfg_hello> <sg_active_hello><sg_cur_hold> <sg_cfg_hold> <sg_active_hold> <sg_is_hello_timer_running> <sg_next_hello><sg_cur_redirect_time> <sg_cfg_redirect_time> <sg_active_redirect_time> <sg_cur_sec_holdtime><sg_cfg_sec_holdtime> <sg_active_sec_holdtime> <sg_cfg_ext_holdtime> <sg_timer_end><sg_auth_data_type> <sg_auth_data> <sg_preempt> <sg_preempt_min_delay><sg_is_preempt_timer_running> <sg_preempt_ts> <sg_delay_end> <sg_active_priority> <sg_active_timer><sg_standby_addr> <sg_standby_priority> <sg_standby_timer> <sg_router_end> <sg_grp_priority><sg_grp_priority_attr> <sg_weighting> <sg_weighting_attr> <sg_weighting_satisfied> <sg_weighting_max><sg_weighting_lower> <sg_weighting_upper> <sg_track_object> <sg_track_state> <sg_track_decrement><sg_weighting_end> <sg_load_bal> <sg_red_name> <sg_mem_count> <sg_mem_start> {TABLE_grp_members <sg_mem_local_mac> <sg_mem_local_ip> <sg_mem_mac> <sg_mem_ip><sg_is_mem_local> <sg_is_mem_authenticated> } <sg_mem_end> <sg_all_mem_end> <sg_fwd_count><sg_active_fwd_count> { <sg_fwd_start> { TABLE_fwd_detail <sg_fwd_num> <sg_fwd_state><sg_fwd_state_change_count> <sg_fwd_last_state_change> <sg_fwd_mac> <sg_fwd_mac_type><sg_fwd_cfg_mac><sg_fwd_owner> <sg_fwd_redirect> <sg_fwd_redirect_timer> <sg_fwd_is_sec_tmr_run><sg_fwd_sec_timer> <sg_fwd_ttl> <sg_fwd_ttr> <sg_fwd_pre> <sg_fwd_pre_min_delay><sg_fwd_is_pre_min_run> <sg_fwd_pre_min_val> <sg_fwd_active_router> <sg_fwd_active_router_attr><sg_fwd_weighting> <sg_fwd_active_addr> <sg_fwd_active_prio> <sg_fwd_active_prio_attr><sg_fwd_active_prio_weight_attr> <sg_fwd_active_timer_val> <sg_fwd_arp_replies> <sg_fwd_redirection><sg_fwd_preempt> } <sg_fwd_end> <sg_all_fwd_end> } } <show_glbp_end> ]

Syntax Description

Show running system informationshow

Show GLBPglbp

(Optional) Display per-VRF informationvrf

(Optional) VRF namevrf-name

(Optional) Interfaceinterface

(Optional) Interface type and numberint-num

(Optional) Group numbergroup

(Optional) Group numbergroup-num

(Optional) Groups in active stateactive

(Optional) Groups in standby statestandby

(Optional) Groups in disabled statedisabled

Cisco Nexus 3600 Series NX-OS Command Reference (Show Commands), Release 7.0(3)F3(1)2

G Commandsshow glbp

(Optional) Groups in init stateinit

(Optional) Groups in listen statelisten

(Optional) Read only__readonly__

(Optional) show glbp startshow_glbp_start

(Optional) Group table detailTABLE_grp_detail

(Optional) show nsf statesg_nsf_state

(Optional) Print NSF statesg_print_nsf_state

(Optional) End of NSF detailssg_nsf_end

(Optional) Interface type and numbersg_if_index

(Optional) Group numbersg_group_num

(Optional) glbp statesg_state

(Optional) Reasonsg_state_reason

(Optional) Number of state changessg_state_count

(Optional) Time of last state changesg_state_last_change

(Optional) Virtual IP addresssg_vip

(Optional) Virtual IP address attributesg_vip_attr

(Optional) Number of Secondary virtual IP addresssg_num_vip_sec

(Optional) Group secondary ip addressTABLE_grp_vip_sec

(Optional) Secondary virtual IP addresssg_vip_sec

(Optional) Secondary Virtual IP address attributesg_vip_sec_attr

(Optional) End of Secondary Virtual IP addressessg_vip_sec_end

(Optional) Active IP addresssg_active_addr

(Optional) Current Hello Timesg_cur_hello

(Optional) Configured Hello Timesg_cfg_hello

(Optional) Active Hello Timesg_active_hello

Cisco Nexus 3600 Series NX-OS Command Reference (Show Commands), Release 7.0(3)F3(1) 3

G Commandsshow glbp

(Optional) Current Hold Timesg_cur_hold

(Optional) Configured Hold Timesg_cfg_hold

(Optional) Active Hold Timesg_active_hold

(Optional) Hello Timersg_is_hello_timer_running

(Optional) Time for next hellosg_next_hello

(Optional) Current redirect timesg_cur_redirect_time

(Optional) Configured redirect timesg_cfg_redirect_time

(Optional) Active redirect timesg_active_redirect_time

(Optional) Current secondary hold timesg_cur_sec_holdtime

(Optional) Configured secondary hold timesg_cfg_sec_holdtime

(Optional) Active secondary hold timesg_active_sec_holdtime

(Optional) Configured Extended hold timesg_cfg_ext_holdtime

(Optional) End of GLBP Timer valuessg_timer_end

(Optional) Authentication data typesg_auth_data_type

(Optional) Authentication datasg_auth_data

(Optional) Preemption enabledsg_preempt

(Optional) Preemption min delaysg_preempt_min_delay

(Optional) Preemption timer runningsg_is_preempt_timer_running

(Optional) Preemption timestampsg_preempt_ts

(Optional) End of delay valuessg_delay_end

(Optional) Active router prioritysg_active_priority

(Optional) Active timer valuesg_active_timer

(Optional) Standby addresssg_standby_addr

(Optional) Standby prioritysg_standby_priority

(Optional) Standby timer valuesg_standby_timer

Cisco Nexus 3600 Series NX-OS Command Reference (Show Commands), Release 7.0(3)F3(1)4

G Commandsshow glbp

(Optional) End of Routerssg_router_end

(Optional) Group prioritysg_grp_priority

(Optional) Group priority attributesg_grp_priority_attr

(Optional) Weightingsg_weighting

(Optional) Weighting attributesg_weighting_attr

(Optional) Weighting satisfiedsg_weighting_satisfied

(Optional) Weighting maxsg_weighting_max

(Optional) Weighting lowersg_weighting_lower

(Optional) Weighting uppersg_weighting_upper

(Optional) Tracksg_track_object

(Optional) Track statesg_track_state

(Optional) Track decrementsg_track_decrement

(Optional) End of weightingsg_weighting_end

(Optional) Load balancingsg_load_bal

(Optional) IP redundancy namesg_red_name

(Optional) Membership countsg_mem_count

(Optional) Start of membership attributessg_mem_start

(Optional) Group membersTABLE_grp_members

(Optional) Member's local mac addresssg_mem_local_mac

(Optional) Member's local ip addresssg_mem_local_ip

(Optional) Member's mac addresssg_mem_mac

(Optional) Member's ip addresssg_mem_ip

(Optional) Localsg_is_mem_local

(Optional) Is Member authenticatedsg_is_mem_authenticated

(Optional) End of membership attributessg_mem_end

Cisco Nexus 3600 Series NX-OS Command Reference (Show Commands), Release 7.0(3)F3(1) 5

G Commandsshow glbp

(Optional) End of all memberssg_all_mem_end

(Optional) Number of forwarders in the groupsg_fwd_count

(Optional) Number of active forwarders in groupsg_active_fwd_count

(Optional) Forwarder Start attributesg_fwd_start

(Optional) Forwarder table detailTABLE_fwd_detail

(Optional) Forwarder Numbersg_fwd_num

(Optional) Forwarder Statesg_fwd_state

(Optional) Forwarder State Change countsg_fwd_state_change_count

(Optional) Time of last State Changesg_fwd_last_state_change

(Optional) Forwarder MAC addresssg_fwd_mac

(Optional) Forwarder MAC address typesg_fwd_mac_type

(Optional) Configured Forwarder MAC addresssg_fwd_cfg_mac

(Optional) Forwarder ownersg_fwd_owner

(Optional) Forwarder redirection enabledsg_fwd_redirect

(Optional) Forwarder redirection timersg_fwd_redirect_timer

(Optional) Is Forwarder secondary timer runningsg_fwd_is_sec_tmr_run

(Optional) Forwarder secondary timersg_fwd_sec_timer

(Optional) Forwarder ttlsg_fwd_ttl

(Optional) Forwarder ttrsg_fwd_ttr

(Optional) Forwarder preemption enabledsg_fwd_pre

(Optional) Forwarder preempt min delaysg_fwd_pre_min_delay

(Optional) Is Forwarder preempt min runningsg_fwd_is_pre_min_run

(Optional) Forwarder preempt min valuesg_fwd_pre_min_val

(Optional) Forwarder active router addresssg_fwd_active_router

(Optional) Forwarder active router attributesg_fwd_active_router_attr

Cisco Nexus 3600 Series NX-OS Command Reference (Show Commands), Release 7.0(3)F3(1)6

G Commandsshow glbp

(Optional) Forwarder weightingsg_fwd_weighting

(Optional) Forwarder active addresssg_fwd_active_addr

(Optional) Forwarder active prioritysg_fwd_active_prio

(Optional) Forwarder priority attributesg_fwd_active_prio_attr

(Optional) Forwarder priority weight attributesg_fwd_active_prio_weight_attr

(Optional) Forwarder active timer valsg_fwd_active_timer_val

(Optional) Forwarder arp repliessg_fwd_arp_replies

(Optional) Forwarder redirection stringsg_fwd_redirection

(Optional) Forwarder preemption stringsg_fwd_preempt

(Optional) Forwarder End attributesg_fwd_end

(Optional) All Forwarders End attributesg_all_fwd_end

(Optional) End of Groupshow_glbp_end

Command Mode

• /exec

Cisco Nexus 3600 Series NX-OS Command Reference (Show Commands), Release 7.0(3)F3(1) 7

G Commandsshow glbp

show glbp briefshow glbp [ vrf <vrf-name> ] [ interface <int-num> ] [ group <group-num> ] [ active | standby | disabled | init| listen ] + brief [ __readonly__ { <sg_brf_start> <sg_brf_show_header> { TABLE_grp <sg_brf_int><sg_brf_group> <sg_brf_pri> <sg_brf_state> <sg_brf_vip> <sg_brf_act> <sg_brf_stdby> }<sg_brf_gener_end> <sg_brf_fwd_start> { TABLE_fwd <sg_brf_fwd_int> <sg_brf_fwd_group><sg_brf_fwd_num> <sg_brf_fwd_pri> <sg_brf_fwd_state> <sg_brf_fwd_mac> <sg_brf_fwd_act> }<sg_brf_fwd_end> <sg_brf_all_fwd_end> <sg_brf_end> } ]

Syntax Description

Show running system informationshow

Show GLBPglbp

(Optional) Display per-VRF informationvrf

(Optional) VRF namevrf-name

(Optional) Interfaceinterface

(Optional) Interface type and numberint-num

(Optional) Group numbergroup

(Optional) Group numbergroup-num

(Optional) Groups in active stateactive

(Optional) Groups in standby statestandby

(Optional) Groups in disabled statedisabled

(Optional) Groups in init stateinit

(Optional) Groups in listen statelisten

Brief outputbrief

(Optional) Read only__readonly__

(Optional) Start of group briefsg_brf_start

(Optional) Show brief headersg_brf_show_header

(Optional) Group tableTABLE_grp

(Optional) Interface type and numbersg_brf_int

(Optional) Group numbersg_brf_group

Cisco Nexus 3600 Series NX-OS Command Reference (Show Commands), Release 7.0(3)F3(1)8

G Commandsshow glbp brief

(Optional) Group prioritysg_brf_pri

(Optional) Group statesg_brf_state

(Optional) Virtual IP addresssg_brf_vip

(Optional) Active routersg_brf_act

(Optional) Standby routersg_brf_stdby

(Optional) End of generic configuration for groupsg_brf_gener_end

(Optional) Start of forwarder briefsg_brf_fwd_start

(Optional) Forwarder tableTABLE_fwd

(Optional) Forwarder interfacesg_brf_fwd_int

(Optional) Forwarder group numbersg_brf_fwd_group

(Optional) Forwarder numbersg_brf_fwd_num

(Optional) Forwarder prioritysg_brf_fwd_pri

(Optional) Forwarder statesg_brf_fwd_state

(Optional) Forwarder MAC addresssg_brf_fwd_mac

(Optional) Forwarder active addresssg_brf_fwd_act

(Optional) End of forwarder briefsg_brf_fwd_end

(Optional) End of all forwarders in groupsg_brf_all_fwd_end

(Optional) End of group briefsg_brf_end

Command Mode

• /exec

Cisco Nexus 3600 Series NX-OS Command Reference (Show Commands), Release 7.0(3)F3(1) 9

G Commandsshow glbp brief

show glbp capabilityshow glbp capability [ interface <int-num> ] [ __readonly__ <sg_cap_header> <sg_cap_start> { TABLE_cap<sg_cap_int> <sg_cap_int_type> <sg_cap_support> <sg_cap_max_groups> } <sg_cap_end><sg_cap_all_if_end> ]

Syntax Description

Show running system informationshow

GLBPglbp

GLBP capabilitycapability

(Optional) Interfaceinterface

(Optional) Interface type and numberint-num

(Optional) Read only__readonly__

(Optional) GLBP capability headersg_cap_header

(Optional) Start of GLBP capabilitysg_cap_start

(Optional) Capability tableTABLE_cap

(Optional) Interfacesg_cap_int

(Optional) Interface typesg_cap_int_type

(Optional) Is GLBP supportedsg_cap_support

(Optional) Maximum number of GLBP groupssg_cap_max_groups

(Optional) End of GLBP capability for interfacesg_cap_end

(Optional) End of GLBP capability for all interfacessg_cap_all_if_end

Command Mode

• /exec

Cisco Nexus 3600 Series NX-OS Command Reference (Show Commands), Release 7.0(3)F3(1)10

G Commandsshow glbp capability

show guestshellshow guestshell [ { detail } ] [ __readonly__ [ TABLE_detail <name> <package_name> <application_name><application_version> <application_description> <key_type> <signing_method> <licensing_name><licensing_version> <ova_path> <state> <disk_reservation> <memory_reservation> <cpu_reservation>TABLE_attached_devices <type> <name> <alias> ] ]

Syntax Description

Show running system informationshow

Display guest shell service informationguestshell

(Optional) Detailed guest shell service informationdetail

(Optional) Read Only__readonly__

(Optional) Virtual service detail tableTABLE_detail

(Optional) Virtual service namename

(Optional) Virtual service package namepackage_name

(Optional) Name of the applicationapplication_name

(Optional) Version of the applicationapplication_version

(Optional) Description of the applicationapplication_description

(Optional) Virtual service key typekey_type

(Optional) Method used to sign the packagesigning_method

(Optional) Name of the licenselicensing_name

(Optional) Version of the licenselicensing_version

(Optional) Virtual service OVA pathova_path

(Optional) Virtual service statestate

(Optional) Virtual service disk reservationdisk_reservation

(Optional) Virtual service memory reservationmemory_reservation

(Optional) Virtual service CPU reservationcpu_reservation

(Optional) Attached devices tableTABLE_attached_devices

(Optional) Type of the attached devicetype

Cisco Nexus 3600 Series NX-OS Command Reference (Show Commands), Release 7.0(3)F3(1) 11

G Commandsshow guestshell

(Optional) Name of the attached devicename

(Optional) Alias for the attached devicealias

Command Mode

• /exec

Cisco Nexus 3600 Series NX-OS Command Reference (Show Commands), Release 7.0(3)F3(1)12

G Commandsshow guestshell