SCUBAPRO® Galileo G2 & DAN DL7 level 3

1

Presently (04/2018) there are NO DAN DL7 level3 Files for the Scubapro Galileo G2 (HW Ver. 0.0, SW Ver 1.3) neither with: SCUBAPRO® LogTRAK, Version 1.5.0.7 nor with SCUBAPRO® SmartTRAK 2.09 The described workaround works only for older Dive Computers, for eg. the SCUBAPRO® ALADIN [2] / Aladin Square… (https://www.divetable.info/Flyer/workaround.pdf)

2

SCUBAPRO ® Galileo G2 & DAN DL7 level 3

LogTRAK 1.5.0.7 allows only for TravelTRAK Format (*.asd) :

3

SCUBAPRO ® Galileo G2 & DAN DL7 level 3

Import of *.asd from G2 into SmartTRAK 2.09 gives now error message:

4

SCUBAPRO ® Galileo G2 & DAN DL7 level 3

The new SUBSURFACE 4.7.7 (https://subsurface-divelog.org/de/ ) will do the job with *.uddf files: connect the G2 to your PC (eg.: via USB cable) hit „LOG“ on G2: USB communication to PC:

5

SCUBAPRO ® Galileo G2 & DAN DL7 level 3

SUBSURFACE will do the job with *.uddf files: in SUBSURFACE 4.7.7 select:

Import from Dive Computer select Scubapro Galileo G2:

6

SCUBAPRO ® Galileo G2 & DAN DL7 level 3

SUBSURFACE will do the job with *.uddf files: select all log files (cntrl a), then:

7

SCUBAPRO ® Galileo G2 & DAN DL7 level 3

SUBSURFACE will do the job with *.uddf files: File Export (or cntrl e) Select „UDDF“:

store the log file and then :

8

… now upload the *.uddf into the DAN Diver Safety Guardian Portal (DSG)! https://www.diversafetyguardian.org/site/frontend/