ganpat university faculty of engineering & … tech final... · current carrying capacity of...
TRANSCRIPT
Elective II:-
2EE705:-Advanced Power Electronics
2EE706:-Advanced Microcontroller
2EE707:-Special Electrical Machines
Elective III: -
2EE708:-Dynamics &Modelling of Electrical Machines
2EE709:-Electrical Machine Design
2EE710:-Power System Practice & Design
2EE711:-HVDC & FACTS
Elective IV:-
2EE712:- Energy Conservation, Audit & Management
2EE713:- Modern Control System
2EE714:-Digital Signal Processing
GANPAT UNIVERSITY
FACULTY OF ENGINEERING & TECHNOLOGY
TEACHING AND EXAMINATION SCHEME
Program
me
Bachelor of Technology Branch/Spec. Electrical Engineering
Semester VII
Effective from Academic Year 2017-18 Effective for the batch Admitted in July 2017
Subject
Code Subject Name
Teaching scheme Examination scheme (Marks)
Credit Hours (per week) Theory Practical
Lecture(DT) Practical(Lab.) Lecture(DT) Practical(Lab.) CE SEE Total CE SEE Total
L TU Total P TW Total L TU Total P TW Total 2EE 701 Commissioning, Testing
&Maintenance of Electrical
Equipment 3 0 3 1 0 1 3 0 3 2 0 2 40 60 100 30 20 50
2EE702 Power system protection &
switchgear 3 0 3 1 0 1 3 0 3 2 0 2 40 60 100 30 20 50
2EE703 Power System Operation &
Control 3 0 3 1 0 1 3 0 3 2 0 2 40 60 100 30 20 50
2EE70E Elective II 3 0 3 1 0 1 3 0 3 2 0 2 40 60 100 30 20 50
2EE71E Elective III 3 0 3 1 0 1 3 0 3 2 0 2 40 60 100 30 20 50
2EE72E Elective IV 3 0 3 0 0 0 3 0 3 0 0 0 40 60 100 00 00 00
2EE704 Industrial Training 0 0 0 1 0 1 0 0 0 2 0 2 0 0 0 30 20 50
Total 18 0 18 6 0 6 18 0 18 12 0 12 240 360 600 180 120 300
GANPAT UNIVERSITY
FACULTY OF ENGINEERING & TECHNOLOGY Programme Bachelor of Technology Branch/Spec. Electrical Engineering
Semester VII Version 1.0.0.0
Effective from Academic
Year
2017-2018 Effective for the batch Admitted
in
July 2017
Subject code 2EE 701 Subject Name Commissioning, Testing &Maintenance of
Electrical Equipment
Teaching scheme Examination scheme (Marks)
(Per
week)
Lecture(DT) Practical(Lab.) Total CE SEE Total
L TU P TW
Credit 3 0 1 0 4 Theory 40 60 100
Hours 3 2 2 0 5 Practical 30 20 50
Pre-requisites:
-
Learning Outcome:
On successful completion of the subject, students should be able to
Understand the process of commissioning.
Prepare the steps of various maintenance methods / techniques.
Suggest the trouble shooting methods to improve life of electrical equipment.
Perform required testing procedure for different equipment using proper tools andmethods.
Theory syllabus
Unit Content Hrs
1
Transformer:
Commissioning steps, Foundation details, Transformer oil testing and filtering
procedure, Drying out, Testing of winding, Bushing, Auxiliaries and safety device,
Maintenance steps and schedule, Causes of troubles and failure[Ref: IS 026:Part_1-
10-Power Transformers: Methods of Test; IS 13956:1994- Testing Transformers]
08
2
Induction Motors:
Installation and commissioning of induction motor, Location of the motors ,
Foundation details ,Control apparatus, Fitting of windings, Drying out of induction
machines, Duty standard for cooling and protection, Various tests, Troubleshooting
and maintenance[Ref: IS 4029:2010-Guide for Testing Three Phase Induction
motors].
07
3
Synchronous Machines:
Commissioning steps, Physical inspection, Foundation details, Alignments, Cooling
and control gear, Drying out, Various Tests, Commissioning of DG sets, Drying out
procedure, Troubleshooting and maintenance[Ref:IS 7132:1973-Guide for Testing
Synchronous Machines].
07
4
DC Machine:
Commissioning steps for DC machines, Various tests, Drying out process,
Troubleshooting & maintenance [Ref: IS 9320:1979-Guide for Testing of Direct Current
(dc) Machines].
05
5
Substation Equipments:
Bus bar:Temperature rise test, Rated short time current test, HV test, Power
frequency voltagewithstand test, Impulse testing, Vibration test.
Earthing: Earth resistance measurement, Substation grid earthing, Soil resistivity
measurement.
Isolator Testing: Temperature resistance test, Short circuit test, Making and breaking
tests.
Lightning Arrester: Testing and commissioning of lightning arrestor.
08
Substation commissioning: Routine and preventive maintenance process
ofsubstation, Substation commissioning by thermograph.
6
Switchgear:
Commissioning steps, Testing of circuit breaker, Relay, CT, PT, Station battery,
Troubleshooting and maintenance of circuit breakers, Relay, CT, PT. 05
7
Transmission line & Cable:
Commissioning steps for transmission line and cable, Various tests, Fault location
technique for underground cables, Line charging, Loading and dropping. 05
Practical content
Practicals, assignments and tutorials are based on above syllabus.
Text Books
1 S. Rao, “Testing, Commissioning operation & Maintenance of Electrical Equipments”, Khanna
publications.
2 Tarlok Singh., “Installation, Commissioning, Maintenance of Electrical Equipment” S.K.
Kataria& Sons.
Reference Books
1 B.V.S. Rao, “Installation, Maintenance and testing vol. I & II ,”S. Chand & Co.
2 Paul Gill, “Electrical Power Equipment Maintenance and Testing”, CRC Press.
3 K.B. Bhatia, “Study of Electrical Appliances and Devices”, Khanna Publishers.
4 S.K. Sharotri, “Preventive Maintenance of Electrical Apparatus” Katson Publishing House
Ludhiana.
5 RCH Richardson, “The commissioning of Electrical Plant”, Chapman & Hall.
6. Philip Kiameh,” Electrical Equipment Handbook: Troubleshooting and Maintenance”,
McGrawHill
7. Relevant Indian Standards (IS Code) and IEEE Standards for- Installation, maintenance and
commissioning of electrical equipments/machines.
GANPAT UNIVERSITY
FACULTY OF ENGINEERING & TECHNOLOGY Programme Bachelor of Technology Branch/
Spec.
Electrical Engineering
Semester VII Version 1.0.0.0
Effective from Academic
Year
2017-18 Effective for the batch Admitted
in
July 2017
Subject code 2EE 702 Subject Name Power system protection & switchgear
Teaching scheme Examination scheme (Marks)
(Per
week)
Lecture(DT) Practical(Lab.) Total CE SEE Total
L TU P TW
Credit 3 0 1 0 4 Theory 40 60 100
Hours 3 0 2 0 5 Practical 30 20 50
Pre-requisites:
-
Learning Outcome:
On successful completion of the subject, students should be able to
Understand importance of protection of system and personnel.
Identify main components, types and features of protection scheme.
Understand the fundamentals of different protective devices.
Acquire skill to design specific protection schemes of require for each part of a power system.
Apply conventional and new generation relays for protection.
Theory syllabus
Unit Content Hrs
1
Switchgears:
Introduction to switchgear, Essential features, Switchgear equipments, Switchgear
accommodation, Short circuit, Faults in a power system. 03
2
Protective Devices:
Fuse, Characteristics of fuse Elements and materials, Important terms, Types of fuses,
Current carrying capacity of fuse element, Difference between isolator and circuit
breaker, Circuit Breakers, Arc phenomenon and arc extinction, Methods of arc
extinction, Arc voltage, Restriking voltage, Recovery voltage, Classification of CB,
Types of oil circuit breaker, Types of air blast circuit breaker,SF6 circuit breaker,
Vacuum circuit breakers, HVDC circuit breaker, Interruption of small inductive current
and capacitive current, Switchgear components, Problems of circuit interruption,
Resistance switching, Circuit breaker ratings, Testing of CB.
08
3
Different Relays, its Characteristics and Application:
Introduction, Requirements of protective relaying, Basic relays, Relay timing, Pick-up
current, Current setting, P.S.M., T.S.M., Calculation of relay operating time, Induction
type over current and directional power relay, Distance or Impedance relays, Time-
distance impedance relays, Differential relays, Current differential relays, Voltage
balance differential relay, Translay System, Types of protection.
08
4
Current Based Relaying Scheme For Transmission Line:
Over current protection, Instantaneous over current relay, Definite time over current
relay, Inverse definite minimum time overcurrent relay, Application of over current
relay, Setting rules for phase and ground relays, Scheme used in practice, Directional
protection.
07
5
Pilot Relaying:
Distance Protection: Fault distance measurement, Stepped distance characteristics,
Reach of distance relay, Selection of measuring unit, Current and Voltage connections,
Problems and remedies.
08
Transmission Line: Pilot protection system, Types of pilot communications, Carrier
current protection, Blocking and unblocking carrier aided distance scheme, Transfer
tripping carrier aided distance scheme.
6
Apparatus Protection Scheme:
Alternator protection, Differential protection, Balanced earth fault protection, Stator
inter-turn protection, Protective systems for transformers, Buchholz relay, Earth fault
or leakage protection, Circulating current scheme for transformer protection, Different
bus-bar protection scheme.
07
7
Digital Protection:
Digital relay, Merits and demerits, Block diagram, Digital over current relay, Digital
earth fault relay, Digital protection of transformer. 04
Practical content
Practicals, assignments and tutorials are based on above syllabus.
Text Books
1 V.K. Mehta and Rohit Mehta, “Principle of Power System”, S. Chand.
2 Badri Ram and D.N.Vishwakarma, “Power System Protection and Switchgear”,
TMHpublishing company.
Reference Books
1 Bhavesh Bhalja, R. P. Maheshwari and N. G. Chothani, “Protection and Switchgear”, Oxford
University Press, New Delhi, 1st edition, 2011.
2 B. Ravindranath and M. Chander, “Power System Protection and Switchgear”, New age
International.
3 Sunil S Rao, “Switchgear and Protection”, Khanna Publishers.
4 Bhuvnesh Oza, Nirmalkumar Nair, Rashesh Mehta and Vijay Makwana,” Power System
Protection And Switchgear”, Tata McGraw Hill Education Private Limited
5 Y. G. Paithankar, “Fundamentals of Power System Protection”, PHI Publication.
GANPAT UNIVERSITY FACULTY OF ENGINEERING &TECHNOLOGY
Programme Bachelor of Technology Branch/Spec. Electrical Engineering Semester VII Version 1.0.0.0 Effective from Academic Year 2016-17 Effective for the batch Admitted in July2017
Subject code 2EE703 Subject Name Power System Operation & Control Teaching scheme Examination scheme(Marks) (Per week) Lecture(DT) Practical(Lab.) Total CE SEE Total
L TU P TW Credit 3 0 1 0 4 Theory 40 60 100 Hours 3 0 2 0 5 Practical 30 20 50 Pre-requisites: - Learning Outcome:
On successful completion of the subject, students should be able to
Understand power flow and losses in different lines in power system and voltages at different
buses.
Solve problems posing different problem models related to Economic Load Dispatch, Load
Frequency Control and reactive power control.
Model power-frequency dynamics and to design power-frequency controller.
Model reactive power-voltage interaction and the control actions to maintain the voltage profile.
Theorysyllabus
Unit Content Hrs
1.
Load Flow Studies:
Network model formulation, formation of Y bus, power flow problem, different types
of buses, Approximate power flow, Gauss Seidel method, Newton-Raphson method,
Decoupled power flow studies, Fast decoupled power flow studies, Comparison of
power flow methods.
11
2.
Economic load dispatch and Unit Commitment :
Economic dispatch of thermal units and methods of solution, Transmission losses, B
matrix loss formula, Composite generation production cost function-solution by
gradient search techniques, Constraints in unit commitment, Spinning reserve,
Dynamic programming solution.
11
3.
Automatic generation control :
Single area load frequency control, Speed governing system and characteristics, Multi
area load frequency control; Flat frequency, Flat tie-line load and tie-line load bias
control, Economic dispatch and AGC.
08
4.
Control of Voltage and Reactive Power
Introduction, Generation and absorption of reactive power, Relation between voltage,
power and reactive power at a node, Single machine infinite bus systems, Methods of
voltage control.
07
5.
Power System Stability:
Dynamics of a synchronous machine, Power angle equation, Node elimination
technique, Simple system, Steady state stability, Transient stability, Equal area
criterion.
08
Practical content Practicals, assignments and tutorials are based on above syllabus
Text Books 1 Nagrath& Kothari, “Power System Engineering”, TMH publishing Company Ltd.
2 C.L.Wadhwa, “Electrical Power Systems”, New Age International Publishers. Reference Books
1. S. S. Vadhera, “Power System Analysis and Stability”, Khanna Publisher
2 Sivanagaraju, Sreenivasan, “Power System Operation and Control”, Pearson, 1st Ed.
3. W. D. Stevenson, “Element of Power System Analysis”, Mc Graw Hill.
5. A. J. Wood and B.F. Wollenberg, “Power Generation Operation and Control”, John Wiley &
Sons, ICN.
2nd Edition. 6. Abhijit Chakrabarti, Sunita Halder, „Power System Analysis Operation and Control‟, PHI
learning Pvt. Ltd., New Delhi, Third Edition, 2010.
7. Kundur P., „Power System Stability and Control, Tata McGraw Hill Education Pvt. Ltd., New
Delhi, 10th reprint, 2010. 8. Hadi Saadat, „Power System Analysis‟, Tata McGraw Hill Education Pvt. Ltd., New Delhi,
21st reprint, 2010.
4. N.V.Ramana, “Power System Operation and Control,” Pearson, 2011.
GANPAT UNIVERSITY
FACULTY OF ENGINEERING & TECHNOLOGY Programme Bachelor of Technology Branch/Spec. Electrical Engineering
Semester VII Version 1.0.0.0
Effective from Academic
Year
2017-18 Effective for the batch
Admitted in
July 2017
Subject code 2EE705 Subject Name Advanced Power Electronics
Teaching scheme Examination scheme (Marks)
(Per
week)
Lecture(DT) Practical(Lab.) Total CE SEE Total
L TU P TW
Credit 3 0 1 0 4 Theory 40 60 100
Hours 3 0 2 0 5 Practical 30 20 50
Pre-requisites:
-
Learning Outcome:
On successful completion of the subject, students should be able to
Identify gate drive requirement for various semiconductor switching devices.
Analysis and design of dc-dc converters.
Learn different pulse width modulation techniques and their applications using simulations.
Understand basic operation voltage source and current source inverters.
Learn basic concepts of advanced converters for high power applications.
Theory syllabus
Unit Content Hrs
1
Gate Drive Circuits:
Introduction, Pulse transformer, Opto isolators, Different schemes for gate firing,
Zero crossing detection, Drive circuit for MOSFET, BJT, IGBT and Thyristor. 08
2
DC-DC Switched Mode Converters :
Introduction, Buck converter, Boost converter, Buck-Boost converter,
CUKconverters, Control principles, Applications of DC-DC converters, SEPIC
converters
08
3
Pulse Width Modulation Techniques:
Introduction, Carrier-Based PWM, Sinusoidal PWM, Space vector modulation,
Hysteresis bandcontroller 08
4
Inverter Circuits:
Introduction to Voltage Source Inverter(VSI),Three phase bridge type Current Source
Inverter(CSI), Load commutated inverters(LCI) , Line commutated converter, Bridge
inverter, Features of LCI, Application of LCI, Current fed vs. voltage fed converters,
Three-phase series inverters.
09
5
Multilevel Converters:
Topologies for multi-level: Diode Clamped, Flying capacitor and Cascaded H-bridge
multilevel Converters configurations; Features and relative comparison of these
configurations applications
07
6
Multi pulse Converters:
Concept of multi pulse converters, Types of multi pulse converters, Different
transformer connections for multi pulse converters, Applications of multi pulse
converters.
05
Practical content
Practicals, assignments and tutorials are based on above syllabus.
Text Books
1 L. Umanand,”Power Electronics: Essentials & Applications”, John Wiley.
2 Singh. M. D., Khanchandani. K. B., "Power electronics", Tata McGraw-Hill Publishing Co.Ltd.,
New Delhi
Reference Books
1. Bimbhra. P. S, "Power electronics", Khanna Publishers, New Delhi.
2. Bin Wu,”High power converters and AC drives”, IEEE Press, John Wiley & Sons, Inc.
3. B.K.Bose,” Power Electronics And Motor Drives”, Prentice-Hall of India Pvt. Ltd., New Delhi.
4. P.C.Sen, "Power Electronics", Tata McGraw-Hill Publishing Co. Ltd., New Delhi
5. Ned Mohan, Tore M. Undel and and William P. Robbins, “Power Electronics Converters,
Applications, and Design”, John Wiley & Sons, Inc., 2nd Edition, 1995.
6. Rasid. M. H., " Power Electronics Circuits, Devices, and Applications”, Prentice-Hall of India
Pvt. Ltd., New Delhi.
GANPAT UNIVERSITY
FACULTY OF ENGINEERING & TECHNOLOGY Programme Bachelor of Technology Branch/Spec. Electrical Engineering
Semester VII Version 1.0.0.0
Effective from Academic
Year
2017-18 Effective for the batch Admitted
in
July 2017
Subject code 2EE706 Subject Name Advanced Microcontroller
Teaching scheme Examination scheme (Marks)
(Per
week)
Lecture(DT) Practical(Lab.) Total CE SEE Total
L TU P TW
Credit 3 0 1 0 4 Theory 40 60 100
Hours 3 0 2 0 5 Practical 30 20 50
Pre-requisites:
-
Learning Outcome:
On successful completion of the subject, students should be able to
Understand the generalized architecture of advanced microcontrollers
Interface to various external peripherals
Program an embedded system in assembly and c
Design, implement and test a single-processor embedded systems for real-time applications
Optimize embedded software for speed and size for industrial applications.
Theory syllabus
Unit Content Hrs
1
Serial Communication in Microcontrollers:
SPI communication protocol, I2C Communication protocol, Interfacing of 8051 with
SPI and I2C based devices likeADC, DAC, E2PROM and RTC (Real Time Clock). 07
2
Introduction to Real Time Operating System (RTOS) : Survey of software architecture: Round-Robin, Round-Robin with interrupts,
Functionqueue-scheduling architecture, Real time operating system architecture,
Introduction to real time operating system, Task and task states, Task and data,
Semaphores and shared data, Thread synchronization and communication.
09
3
CIP-51 Microcontroller (C8051F12x by SiLabs): Features of CIP-51, Pipelined architecture, In-system debug, Programmable digital
I/O and crossbar, 12-bit ADC, 12-bit DAC, CIP-51 Instruction set summary, Memory
organization including concept of SFR paging, Interrupt handler, Port input/output,
Priority crossbar decoder, UART0, UART1,Timers, Programmable counter array.
12
4
Programming of CIP-51 Microcontroller: Using the SiLab IDE, Tool chain integration, Project and source program creation,
Building, Downloading anddebugging the program, Initialization functions with
selection of SFR page, Port I/O programming, ADC and DAC programming, Timers
programming, UART programming, PCA programming.
12
5
Introduction to 32-bit Microcontroller:
Cortex overview, ARM architectural revision, Cortex CPU, Pipelining, Thumb-2
instruction set, Memory map, Nested vector interrupt controller. 05
Practical content
Practicals, assignments and tutorials are based on above syllabus.
Text Books
1 Han-Way Huang, “Embedded System Design with the C8051”, Cengage Learning.
2 Jonathan W. Valvano, “Embedded Microcomputer Systems: Real Time Interfacing”, Cengage
Learning
Reference Books
1 Trevor Martin, “The Insider‟s guide to The STM32 ARM Based Microcontroller”, Hitex (UK)
Ltd.
2 David E. Simon, “An Embedded Software Primer”, Pearson Education
3 Data Sheet of “C8051F12x” by SI Labs
4 Data Sheet of “STM32F407xx” by ST Microelectronics.
5 Reference Manual of “STM32F407xx” by ST Microelectronics.
GANPAT UNIVERSITY FACULTY OF ENGINEERING & TECHNOLOGY
Programme Bachelor of Technology Branch/Spec. Electrical Engineering
Semester VII Version 1.0.0.0
Effective from Academic
Year
2017-18 Effective for the batch Admitted
in
July 2017
Subject code 2EE 707 Subject Name Special Electrical Machines
Teaching scheme Examination scheme (Marks)
(Per
week)
Lecture(DT) Practical(Lab.) Total CE SEE Total
L TU P TW
Credit 3 0 1 0 1 Theory 40 60 100
Hours 3 0 2 0 2 Practical 30 20 50
Pre-requisites:
-
Learning Outcome:
On successful completion of the subject, students should be able to
Understand constructional aspects, operational aspects, characteristic and control of different
advanced electrical machines.
Have a clear understanding of the different types and topologies of modern electrical machines.
Analyze advanced electrical machines with an insight in to itsapplicability.
Understand characteristics and applications of advanced electrical machines.
Theory syllabus
Unit Content Hrs
1
Switched Reluctance Motors:
Constructional features, Types of SRMs, Principle of operation, Torque production,
Power controller, Steady state performance prediction, Analytical method ,Power
converters and their controllers, Methods of rotor position sensing , Sensor less
operation ,Closed loop control of SRM ,Torque-speed characteristics
07
2
Permanent Magnet D.C. Motors:
Principle of operation, Magnetic circuit analysis, Permanent magnet materials
,Magnetic characteristics, Permeance coefficient ,EMF and torque equations
,Commutation , Power controllers ,Motor characteristics and control
07
3
Servo Motor:
Construction, Principle of operation, Characteristics, Types of servo motors,
Applications 08
4
Permanent Magnet Synchronous Machines:
Principle of operation ,EMF and torque equations, Reactance, Phasor diagram, Power
controllers, Converter, Volt-ampere requirements, Torque speed
characteristics,Armature reaction MMF , Synchronous Reactance , Sine wave motor
with practical windings.
10
5
Stepping Motors:
Constructional features, Principle of operation, Variable reluctance motor, Hybrid
motor, Single and multi-stack configurations, Theory of torque predictions, Linear
and non-linear analysis, Torque-speed characteristics, Drive circuits.
08
6
Energy Efficient Motors:
Standard motor efficiency, Concept of energy efficient motor, Efficiency evaluation
techniques, Direct measurement method, Losses segregation method, Energy efficient
motor standards, Motor life cycle.
05
Practical content
Practicals, assignments and tutorials are based on above syllabus.
Text Books
1 Mukherjee and Chakravorty, “Electrical Machines”, DhanpatRai Pub., New Delhi, 2005.
2 T.J.E Miller, “Brushless permanent magnet and reluctance motor drives”, Clarendon Press,
Oxford, 1989.
Reference Books
1 Nagrath and Kothari, “Electric Machines”, TMH, New Delhi, 2005.
2 M. G Say, “The performance and design of alternating current machines”, CBS Publishers and
Distributors.
3 Fitzgerald, Kingsley and Umans “Electric Machinery”:, TMH, New Delhi, 2003
4 P. S Bimbhra, “Electrical Machinery”, Khanna Pub., Delhi, 1998
5 V. V. Athani, “Stepper Motors: Fundamentals, Applications and Design”, New Age
International Pvt. Ltd.
6 V.K.Gaudani,” Energy Audit and Energy Mnagment”, Vol-I,IECC Press.
7. William H. Yeadon, Alan W. Yeadon, “Handbook of small electric motors”, McGraw-Hill
GANPAT UNIVERSITY FACULTY OF ENGINEERING &TECHNOLOGY
Programme Bachelor of Technology Branch/Spec. Electrical Engineering Semester VII Version 1.0.0.0 Effective from Academic Year
2017-18 Effective for the batch Admitted in
July2017
Subject code 2EE708 Subject Name Dynamics and Modelling of Electrical Machines Teaching scheme Examination scheme(Marks) (Per week) Lecture(DT) Practical(Lab.) Total CE SEE Total
L TU P TW
Credit 3 0 1 0 4 Theory 40 60 100 Hours 3 0 2 0 5 Practical 30 20 50 Pre-requisites: - Learning Outcome:
On successful completion of the subject, students should be able to Understand mathematical model of conventional electrical machines. Apply the concept of reference frame theory for various ac machines. Understand dynamics of electrical machines. Apply mathematical model for simulation and analysis.
Theory syllabus
Unit Content Hrs
1 Basic Principles for Electric Machine Analysis: Magnetically coupled circuits, Electromechanical energy conversion, Machine windings andair gap MMF, Winding inductances and voltageequations.
04
2
Direct-Current Machines: Introduction, Elementary direct-current machine, Basic types of direct-current machines, Voltage and torque equations.
05
3
Reference Frame Theory: Equations of transformation: Changes of variables, Stationary circuit variables transformed to the arbitrary reference frame, Commonly used reference frames, Transformation between reference frames, Transformation of balanced set, Balanced steady state phasor relationships, Balanced steady state voltage equations, Variables observed from various frames.
08
4
Symmetrical Induction Machines: Voltage and torque equations in machine variables, Equations of transformation for rotor circuits, Voltage and torque equations in arbitrary reference frame variables, Analysis of steady state operation: State-space model of induction machine in „d-q‟ variables, Free acceleration characteristics, Dynamic performance during sudden changes in load torque and during a 3 phase fault at the machine terminals.
12
5
Synchronous Machines: Voltage and torque equations in machine variables, Stator voltage equations in arbitrary reference frame variables, Voltage equations in rotor reference frame Variables: Park‟s equations, Torque equations in substitute variables, Analysis of steady state operation, Dynamic performance during a sudden changes in input torque and during a three phase fault at the machine terminals.
08
6
Computer Simulation of Electric Machines: Simulation of symmetrical induction machines, synchronous machines and DC machines, Thermal model of induction machine, Induction machine dynamics during starting, braking and reversing.
05
7
Linearized Machine Equations: Introduction, Linearization of induction and synchronous machine equations.
03
Practical content
Practicals, assignments and tutorials are based on above syllabus
Text Books 1 Paul C. Krause, Oleg Wasynczuk and Scott D. Sudhoff, “Analysis of Electric Machinery and
Drive Systems”, John Wiley & Sons, New York, 2nd
Edition, 2006.
2 P S Bimbhra,”Generalized theory of electrical machines”, 5th edition, Khanna Publishers Delhi. Reference Books
1 R Krishnan “Electrical Motor Drives, Modeling, Analysis, and Control”, Pearson Education.
2 J. Meisel, “Principles of Electromechanical Energy Conversion” McGraw Hill, 1966.
3 C.V. Jones, “Unified Theory of Electrical Machines” Butterworths Publishers.
GANPAT UNIVERSITY
FACULTY OF ENGINEERING & TECHNOLOGY Programme Bachelor of Technology Branch/Spec. Electrical Engineering
Semester VII Version 1.0.0.0
Effective from Academic Year 2017-18 Effective for the batch Admitted in July 2017
Subject code 2EE 709 Subject Name Electrical Machine Design
Teaching scheme Examination scheme (Marks)
(Per week) Lecture (DT) Practical(Lab) Total CE SEE Total
L TU P TW
Credit 3 0 1 0 4 Theory 40 60 100
Hours 3 0 2 0 5 Practical 30 20 50
Pre-requisites:
-
Learning Outcome:
On successful completion of the subject, students should be able to
Understand the calculation and rating of various types of electricalmachines.
Understand the concept of design of electrical machines.
Able to design the various electrical machines as per requirements.
Theory syllabus
Unit Content Hrs
1
General Aspects:
Insulating materials, Classifications, Heating of electrical machines, Cooling of transformer
and rotating machines, Electrical and magnetic loading, Output coefficient, Factors
affecting size of machines, Selection of Bav& ac, Duty cycle and equivalent ratings.
05
2
Three Phase Transformer:
Different types of windings, Methods for cooling, Different positions of tapping, Output
equation, Window space factor, Stacking factor, Selection of Bav and ac, Window ,Yoke
and overall core dimension calculations, Design of HV and LV windings, Estimation of
operating characteristics, Primary and secondary winding resistance, Leakage reactance
calculation, No load current calculations, Temperature rise, Design of tank with tubes,
Design for optimum cost and minimum loss, Variation of output and losses in transformer
with linear dimensions, Dry transformer, High frequency transformer.
13
3
DC Machine:
Output equation, MMF calculation, Selection of number of poles, Core length, Armature
diameter, Carter‟s fringing curves, Length of air gap, Design of armature winding, Design
of armature core, D.C. winding pole and interpole design, Design of field winding, Effects
of armature reaction and minimization, Design of commutator and brushes, Performance
calculation and design consideration for large machines and HV machines.
10
4
Induction Machines:
Output equation, Main dimensions, Choice of specific electric and magnetic loadings,
Design of stator & rotor windings, Stator & rotor slots and air-gap of slip ring and squirrel
cage motor, Calculation of rotor bar and end ring currents in cage rotor, Calculation of
equivalent circuit parameters and prediction of magnetizing current based on design data.
10
5
Alternators:
Output equation, Salient pole and turbo alternators, Main dimensions, Choice of specific
electric and magnetic loadings, Choice of speed and number of poles, Design of armature
conductors, Slots and winding, Design of air-gap, field system and damper winding,
Prediction of open circuit characteristics and regulation based on design data.
07
Practical content
Practicals, assignments and tutorials are based on above syllabus.
Text Books
1 A. K. Sawhney, “ A course in electrical machine Design”,DhanpatRai& sons
2 Gray A, “Electrical Machine Design”, Macgraw Hill publications.
Reference Books
1 S. K. Sen,“Electrical Machine Design”, Oxford Publications.
2 V. N. Mittle, “ Electrical Machine Design”, TMH publications
GANPAT UNIVERSITY FACULTY OF ENGINEERING &TECHNOLOGY
Programme Bachelor of Technology Branch/Spec.
Electrical Engineering Semester VII Version 1.0.0.0 Effective from Academic Year
2017-18 Effective for the batch Admitted in July2017
Subject code 2EE710 Subject Name Power System Practice & Design Teaching scheme Examination scheme(Marks) (Per week) Lecture(D
T) Practical(Lab.)
Total CE SEE Total L TU P TW
Credit 3 0 1 0 4 Theory 40 60 100 Hours 3 0 2 0 5 Practical 30 20 50 Pre-requisites:
- Learning Outcome:
On successful completion of the subject, students should be able to
Understand the electrical and mechanical design and performance of transmission line.
Calculate the efficiency and other parameters by creating circle diagrams of transmission line.
Understand the different criteria for the design of distribution system.
Understand the location of protective devices and their uses in the substation.
DesignEHV transmission line and substation.
Theory syllabus
Unit Content Hrs
1.
Design of Transmission line:
Electrical Design: Selection of voltage level and choice of conductors, Conductor
spacing, Surge Impedance Loading.
Mechanical Design: Loading on conductors, Span, Sag and tension clearance,
Stringing, Location of tower, Earth wires, Tower footing resistance.
08
2.
Design of Distribution System:
Selection of feeders using Kelvin‟s law, Design of cables, Design of primary and
secondary distribution, HV distribution design concept, Load balancing
distribution substation, Calculation of distributor size, Calculation of voltage
drops and size of distributor in ring system, Voltage regulation and lamp flicker.
07
3.
Substation Design:
Layout, sizes and locations of sub stations, Substation equipments ratings and
operation from design view point
05
4.
Design of Power Station:
Introduction, Selection of sizes and location of generating stations,
interconnection and its advantages.
05
5.
Insulation Coordination and Location of Lightning Arrestor :
Definitions, Insulation-co-ordination curves, Determination of line insulation,
Basic Insulation Level, Insulation levels of substation equipments, Lightning
arrestor selection and location, Arrestor discharge voltage and current, Protective
margin.
07
6.
Design of EHV Transmission lines:
Design Considerations, Conductor selection and spacing, Corona and radio
interference, Shunt and series compensation, Tuned power lines, Insulation
coordination and types of towers.
07
7.
Quality Improvement of Distribution Systems:
Methods of power system improvement and scheme, Determination of voltage
regulation and losses in a power system, Shifting of distribution transformer
centre, Financial aspects of improvement scheme.
06
Practical content Practicals, assignments and tutorials are based on above syllabus
Text Books 1 M. V. Deshpande, “Electrical Power System Design”, TMH publishing Company.
2 Soni, Gupta and Bhatnagar,”A Course in Electrical Power”, Dhanpat Rai. Reference Books
1 B. R. Gupta, “Power System Analysis and Design”, S. Chand.
2 A. S. Pabla, “Electrical Power System Planning”, TMH publishing Company.
3 Satnam and Gupta, “Substation Design and Equipments”, Dhanpat Rai.Gupta,“Substation Design and Equipments”, Dhanpat Rai.
GANPAT UNIVERSITY FACULTY OF ENGINEERING & TECHNOLOGY
Programme Bachelor of Technology Branch/Spec.
Electrical Engineering Semester VII Version 1.0.0.0 Effective from Academic Year
2017-18 Effective for the batch Admitted in July2017
Subject code 2EE711 Subject Name HVDC & FACTS Teaching scheme Examination scheme(Marks)
(Per week) Lecture(DT) Practical (Lab.)
Total CE SEE Total
L TU P TW Credit 3 0 0 0 3 Theory 40 60 100 Hours 3 0 0 0 3 Practical 0 0 0 Pre-requisites: - Learning Outcome:
On successful completion of the subject, students should be able to
Understand various types of FACTS (Flexible AC Transmission Systems) devices and their
applications.
Understand the role of reactive power in power system performance.
Investigate and suggest solution for various power quality issues.
Identify, formulate, and solve real network problems with series and shunt FACTS controllers.
Familiar with recent trend in FACTS controllers and coordination of FACTS controllers.
Theory syllabus
Unit Content Hrs
1
DC Power Transmission Technology: Introduction-comparison of AC and DC transmission-application of DC transmission
description of DC transmission system-planning for HVDC transmission-modern
trends in DC transmission, Different configuration of HVDC scheme.
05
2
Analysis of HVDC Converters:
Pulse number-choice of converter configuration-simplified analysis of Graetz circuit
converter bridge characteristics –characteristics of a twelve pulse converter, Different
faults occurred in converter, Protection against overvoltage, over current.
08
3
HVDC System Control:
General principles of DC link control-converter control characteristics –system control
hierarchy – firing angle control-current and extinction angle control-starting and
stopping of DC link – power control-higher level controllers telecommunication
requirements. Harmonics and Filters: Introduction-generation of harmonics-design of
AC filters-DC filters-carrier frequency and RI noise
08
4
FACTS - Introduction: Fundamentals of EHVAC power transmission, Concept of flexible AC transmission,
Overview of FACTS devices.
06
5
Reactive Power Control in Transmission Systems: Reactive power, Uncompensated transmission line: load compensation, system
compensation, Lossless distributed parameter line: symmetrical lines, Mid-point
conditions of a symmetrical line, Passive compensation: Shunt compensation, Series
compensation, Effect on power transfer capacity.
08
6
Reactive Power Compensation: Static Synchronous Compensator(STATCOM):operating principle , V-I characteristics, Compensation by STATCOM and SSSC, Synchronous condenser, Saturated reactor, Thyristor-controlled reactor (TCR), Thyristor controlled transformer (TCT), Fixed capacitor-Thyristor controlled reactor (FC-TCR), Thyristor switched capacitor (TSC), Thyristor-switched capacitor-Thyristor controlled reactor (TSC-TCR).
10
Text Books
1 S. Kamakshaiah & V. Kamaraju, “HVDC Transmission”, Tata McGraw hill education 2 Barain G. Hingorani, “Understanding Facts”, IEEE Press, New York
Reference Books
1. K.R.Padiyar, “FACTS controllers in power transmission and Distribution‟ New Age international Publishers 1st edition -2007.
2. Mohan Mathur, Rajiv. K. Varma, “Thyristor – Based FACTS Controllers forElectrical Transmission Systems”, IEEE press and John Wiley & Sons.
3. Kimbark E.X., “Direct Current Transmission”, Wiley Interscience, New York
4. A.T.John, Y.H.Song, “Flexible AC Transmission Systems (FACTS)”, IEEE Series
5. Yong Hua Sung and Allan T. John (ed), “Flexible AC Transmission System (FACTS)”, The Institution ofElectrical Engineering, London 6. X.P. Zhang, C. Rehtanz and B. Pal, “Flexible AC Transmission Systems: Modeling and Control”, Birkhauser, 2006.
7. A. Chakraborty, D.P. Kothary, A.K. Mukhopadhyay, “The Performance, Operation and Control of EHV “,Wheeler Pub. Power Transmission Systems”, Wheeler Pub.
GANPAT UNIVERSITY FACULTY OF ENGINEERING &TECHNOLOGY
Programme Bachelor of Technology Branch/Spec. Electrical Engineering
Semester VIII Version 1.0.0.0 Effective from Academic Year
2017-18 Effective for the batch Admitted in July2017 Subject code 2EE712 Subject Name Energy Conservation, Audit & Management Teachingscheme Examination scheme(Marks) (Per week)
Lecture(DT) Practical(Lab.) Total CE SEE Total
L TU P TW
Credit 3 0 0 0 3 Theory 40 60 100 Hours 3 0 0 0 3 Practical 0 0 0 Pre-requisites: - Learning Outcome:
On successful completion of the subject, students should be able to
Understand the importance of energy conservation.
Carry out the energy audit of an industry/organization.
Understand the energy management system and their essential elements.
Evaluate the techno economic feasibility of the energy conservation technique adopted. Theory syllabus
Unit Content Hrs
1
Energy Scenario:
Commercial and non-commercial energy, Primary energy resources, Commercial energy
production, Final energy consumption, Energy needs of growing economy, Long term
energy scenario, Energy pricing, Energy sector reforms, Energy and environment, Air
pollution, Climate change, Energy security, Energy conservation and its importance,
Energy strategy for the future, Energy conservation act 2001.
05
2
Basics of Energy & its Various Forms:
Electricity basics, DC and AC currents, Electricity tariff, Load management and
maximum demand control, Power factor, Thermal basics, Fuels, Thermal energy content
of fuels, Temperature and pressure, Heat capacity, Sensible and latent heat, Evaporation,
Condensation, Steam, Moist air, Humidity and heat transfer, Units and conversion.
05
3
Energy Management and Audit:
Definition, Energy audit, Need, Types of energy audit, Energy management approach,
Understanding energy costs, Benchmarking, Energy performance, Matching energy use
to requirement, Maximizing system efficiencies, Optimizing the input energy
requirements, Fuel and energy substitution, Energy audit instruments.
06
4
Energy Action Planning:
Key elements, Force field analysis, Energy policy purpose, Perspective contents,
Formulation, Ratification, Organizing, Location of energy management, Top
management support, Managerial function, Roles and responsibilities of energy manager,
Accountability, Motivation of employees, Information system designing barriers,
Strategies, Marketing and communicating, Training & planning.
04
5
Financial Management:
Investment, Need, Appraisal and criteria, Financial analysis techniques, Simple payback
period, Return on investment, Net present value, Internal rate of return, Cash flow, Risk
and sensitivity analysis, Financing options, Energy performance contracts and role of
ESCOs.
05
6
Global Environmental Concerns:
United Nations Framework Convention on Climate Change (UNFCC), Kyoto protocol,
Conference of Parties (COP), Clean Development Mechanism (CDM), Prototype Carbon
Fund (PCF), Sustainable development.
03
7
Electrical System:
Electricity billing, Electrical load management & maximum demand control, Power
factor improvement & it‟s benefits, Selection & location of capacitors, Performance
assessment of p.f capacitors, Distribution and transformer losses.
04
8
Electric Motors:
Types, Losses in induction motors, Motor efficiency, Factors affecting motor
performance, Rewinding and motor replacement issues, Energy saving opportunities with
energy efficient motors.
03
9
Lighting System:
Light source, Choice of lighting, Luminance requirements, Terminologies used in
lighting systems, Recommended illuminance standards, Methodology of energy
efficiency audit in lighting systems, Good practices, Energy conservation avenues.
03
10
DG Set System:
Basics of internal combustion engines, Factors affecting selection & performance, Waste
heat recovery to enhance cost effectiveness of DG sets, Energy performance assessment,
Energy conservation avenues and troubleshooting.
03
11
Energy Efficient Technologies in Electrical System:
Maximum demand controllers, Automatic power factor controllers, Energy efficient
motors, Soft starters with energy saver, Variable speed drives, Energy efficient
transformers, Electronic ballast, Occupancy sensors, Energy efficient lighting controls,
Energy saving potential of each technology.
04
Text Books
1 “Encyclopedia of Energy”, McGraw Hill Publication.
2 Albert Thumann, “Handbook of Energy Engineering”, The Fairmont Press Inc.Delhi.
Reference Books
1 Wayne C. Turner, “Energy management Handbook”, John Wiley and sons.
2 Cleaner Production, “Energy Efficiency Manual for GERIAP, UNEP”, Bangkok prepared by
National Productivity Council.
3 Prasanna Chandra, “Financial management”, Tata Mc-Graw Hill.
4 S.Choudhury, “Projects: Planning, Analysis, Selection, Implementation and Review”, Tata
McGraw Hill.
GANPAT UNIVERSITY FACULTY OF ENGINEERING &TECHNOLOGY
Programme Bachelor of Technology Branch/Spec. Electrical Engineering Semester VII Version 1.0.0.0 Effective from Academic Year
2017-18 Effective for the batch Admitted in July2017
Subject code 2EE713 Subject Name Modern Control System Teaching scheme Examination scheme(Marks) (Per week) Lecture(DT) Practical(Lab.) Total CE SEE Total
L TU P TW
Credit 3 0 0 0 3 Theory 40 60 100 Hours 3 0 0 0 3 Practical 0 0 0 Pre-requisites: - Learning Outcome:
On successful completion of the subject, students should be able to
Apply linear algebra to complex real world problems in order to obtain models that are express
dusing state space equations.
Analyze the system behavior based on the mathematical model of that system where the model
maybe expressed in state-space domain.
Design controllers using the concept of state feedback and pole placement tech.
Write a report that effectively communicates the results of an analysis or design
Theory syllabus
Unit Content Hrs
1
State Space Analysis of Control Systems :
State variables; State-space representation of electrical and mechanical and
electromechanical systems, State space representation of nth order linear differential
equation, Transformation to phase variable canonical form, Relationship between
state equations and transfer functions, Characteristic equation, Eigen values and eigen
vectors ,Transformation to diagonal canonical form, Jordan canonical form,
Controllability canonical form, Observabilty canonical form, Decomposition of
transfer function-direct, Cascade and parallel decomposition, State diagram, Solution
of the time-invariant state equation, State transition matrix and its properties, Transfer
matrix; Transfer matrix of closed loop systems.
14
2
Controllability and Observability:
Concept of controllability and observability, Kalman‟s theorems on controllability, and observability, Alternative Tests (gilbert‟s method) of controllability and observability, Principle of duality, Relationship among controllability, Observability and transfer function.
05
3
State feedback controller:
Design of state feedback controller using pole placement technique, Ackerman‟s formula
05
4
Liapunov Stability Analysis :
Stability of equilibrium state in the sense of Liapunov, Graphical representation of stability, Asymptotic stability and instability, Sign-definiteness of scalar function, Second method of Liapunov, Stability analysis of linear systems, Krasovski‟s theorem, Liapunov function based on variable gradient method.
05
5
Describing Function Analysis of Nonlinear Control System :
Introduction to nonlinear systems, Describing functions for common types of
nonlinearities, Describing function analysis, Stability and limit cycles.
10
6
Phase Plane Analysis : Introduction : Analytical methods for constructing trajectories, graphical methods for constructing
trajectories, Isocline method, Delta method, Pell‟s method, Lienard‟s method, Classification of singular points, Limit cycles, Phase-place analysis of linear control
system, Phase-plane analysis of non-linear control system, Minimum time trajectory, Optimum Switching curve.
06
Text Books 1 Katsuhiko Ogata, “Modern Control Engineering”, Prentice-Hall of India, Second Edition,
1997. 2 B. C. Kuo, “Automatic Control Systems”, Prentice – Hall of India, Seventh Edition 1997.
Reference Books
1 L. J. Nagrath & M. Gopal, “Control Systems Engineering. Wiley Eastern Limited”, Second Edition, 1992.
2 M. Gopal, “Control System Principles and Design “,Tata – McGraw Hill, 1997.
3 John E. Gibson, “Non-linear Automatic Control “, Mc. Graw Hill Book C.(ISE)
4 Hasan K. Khalil, “Non-linear systems “, Prentice-Hall of India, 2002.
5 E Slotine, Weiping Li, “Applied Nonlinear Control “, Prentice-Hall
GANPAT UNIVERSITY FACULTY OF ENGINEERING &TECHNOLOGY
Programme Bachelor of Technology Branch/Spec. Electrical Engineering
Semester VII Version 1.0.0.0 Effective from Academic Year
2017-2018 Effective for the batch Admitted in
July2017
Subject code 2EE714 Subject Name Digital Signal Processing Teaching scheme Examination scheme(Marks) (Per week) Lecture(DT) Practical(Lab) Total CE SEE Total
L TU P TW
Credit 3 0 0 0 3 Theory 40 60 100 Hours 3 0 0 0 3 Practical 0 0 0 Pre-requisites: - Learning Outcome:
On successful completion of the subject, students should be able to
Represent signals in various forms for analysis
Analyze various signals in time domain and frequency domain systems
Carry out fourier analysis of continuous time and discrete time signals
Theory syllabus
Unit Content Hrs
1 Discrete Time Systems :
Z-transform, LT1 systems, Description by difference equations, System function, Impulse
response and frequency response. Realization structures for IIR and FIR filters. 10
2 DFT and FFT:
Discrete convolution, Discrete fourier transform, Fast FFT, Algorithms for efficient
Computation of DFT and FFT, Convolution, Correlation.
08
3 Digital filter Design :
FIR and IIR filters, linear phase filters, Analysis of finite word length effects. 10
4
Multirate digital signal processing:
Poly-phase decomposition, multistage decimators and interpolators, Digital filter Banks,
Adaptive filtering, Minimum mean square error criterion, Wiener filter. 06
5
DSP Processor:
Introduction to the TMS320F2XXX DSP Controller, its architecture, C2XXX DSP CPU
and instruction set, Assembly programming using the C2XXX DSP instruction Set,
General purpose input-output functionality in brief, Introduction to interrupts, Event
managers.
08
6
Applications:
Electric Motor (Stepper Motor, DC Motor, PMSM, Induction Motor etc.) control using
TMS320F2XXXX. 03
Text Books 1 Proakis and Manolkis : Digital Signal Processing – Principles algorithms and applications PHI
2 Sanjit Kumar Mitra,” igital Signal Processing: A Computer-Based Approach”, McGraw-Hill Education.
Reference Books
1 Lawrence R. Rabiner, BernardGold ,”Digital Signal Processing”, Prentice-Hall 2 N.G.Palan,” Digital Signal Processing”, Buck Pearson education publication 3. Texas Instruments handouts for TMS320LF2407 processor.
4. Oppeheim, Schafer ,“Discrete Time Signal Processing”, Buck Pearson education
5. Li Tan ,”Digital Signal Processing fundamentals and applications”, Elsevier
GANPAT UNIVERSITY FACULTY OF ENGINEERING &TECHNOLOGY
Programme Bachelor of Technology Branch/Spec. Electrical Engineering Semester VII Version 1.0.0.0 Effective from Academic Year
2017-2018 Effective for the batch Admitted in July2017
Subject code 2EE704 Subject Name Industrial Training Teaching scheme Examination scheme(Marks) (Per week) Lecture(DT) Practical(Lab.) Total CE SEE Total
L TU P TW
Credit 0 0 1 0 1 Theory 0 0 0 Hours 0 0 2 0 2 Practical 30 20 50 Pre-requisites: - Learning Outcome:
On successful completion of the subject, students should be able to
Identify the industry as per his/her interest
Understand the industrial products and process
Understand overall working of industry
Enhance their presentation skills
Prepare proper report
Content
Based on industrial training of minimum three weeks which is mandatory after the completion of
semester VI and before commencement of semester VII , student is required to prepare detail report on
industrial training. Student is required to give internal presentations. Student will have to present
his/her work before the examiners at the time of final evaluation.
GANPAT UNIVERSITY
FACULTY OF ENGINEERING & TECHNOLOGY
TEACHING AND EXAMINATION SCHEME
Programme Bachelor of Technology Branch/Spec. Electrical Engineering
Semester VIII
Effective from Academic Year 2017-18 Effective for the batch Admitted in July 2017
Subject
Code Subject Name
Teaching scheme Examination scheme (Marks)
Credit Hours (per week) Theory Practical
Lecture(DT) Practical(Lab.) Lecture(DT) Practical(Lab.) CE SEE Total CE SEE Total
L TU Total P TW Total L TU Total P TW Total 2EE801 Major Project 0 0 0 15 0 15 0 0 0 30 0 30 0 0 0 200 200 400
Total 0 0 0 15 0 15 0 0 0 30 0 30 0 0 0 200 200 400
GANPAT UNIVERSITY FACULTY OF ENGINEERING &TECHNOLOGY
Programme Bachelor of Technology Branch/Spec. Electrical Engineering Semester VIII Version 1.0.0.0 Effective from Academic Year
2017-2018 Effective for the batch Admitted in July2017
Subject code 2EE801 Subject Name Major Project Teaching scheme Examination scheme(Marks) (Pe rweek) Lecture(DT) Practical(Lab.) Total CE SEE Total
L TU P TW
Credit 0 0 15 0 15 Theory 0 0 0 Hours 0 0 30 0 30 Practical 200 200 400 Pre-requisites: - Learning Outcome:
On successful completion of the subject, students should be able to
Identify technical problems related to societal need, industry, research, etc.
Understand various tools and techniques
Apply various tools and techniques for problem solution.
Analyze the system and select parameters to be improved.
Achieve precision in uses of components, tools and techniques related to their
experiments/fabrication.
Recognize and refine various component of technology for resource optimization.
Report project related activities effectively to peers, mentors and society.
Content A Student is required to select a major project on any relevant topic from the curriculum, recent
trends in technology, system/process analysis, construction/fabrication/production techniques,
design methodologies etc. The student(s) shall do major project at relevant
academic/R&D/industry. Student is required to give internal presentation on his/her major project
during the semester. At the end of semester student will be required to submit a detailed project
report. A student has to defend his/her work before the examiners at the end of semester.