gas servei brochure
DESCRIPTION
Refigerant gases distributor HVAC&R Service toolsTRANSCRIPT
Copyright © Gas Servei, S.A. Brochure 2012. All rights reserved.
R-407F(Genetron
Performax LT)
kg5/12/20/50
OILPOE
TEMPERATUREM/L
GLIDE4,4 ºC
APPLICATION- Refrigeration
REPLACEMENT(Drop-in)
R-404A & R-507
R-407C(KLEA 407C)
kg1,8/5/13/25/55
OILPOE
TEMPERATUREH/M
GLIDE7,4 ºC
APPLICATION- A&C & Refrigeration
REPLACEMENT(Retrofit)
R-22
R-407A(KLEA 407A)
kg1,8/5/13/25/55
OILPOE
TEMPERATUREM/L
GLIDE4,3 ºC
APPLICATION- Refrigeration
REPLACEMENT(Retrofit)
R-22
R-410A(KLEA 410A)
kg1,8/5/11/20/50
OILPOE
TEMPERATUREA
GLIDE0,5 ºC
APPLICATION- Air Conditioning
R-426A(RS-24)
kg2/5/14/25/60
OILM / AB / POE
TEMPERATUREH/M
GLIDE0,5 ºC
APPLICATION- A&C & Refrigeration
- Automotive- Refrigerated Transport
REPLACEMENT(Drop-in)
R-12
R-437A(Isceon 49 Plus)
kg2/6/15/60
OILM / AB / POE
TEMPERATUREH/M
GLIDE3,6 ºC
APPLICATION- A&C & Refrigeration
- Automotive- Refrigerated Transport
REPLACEMENT(Drop-in)
R-12
R-134A(KLEA 134A)
kg2/6/15/25/60
OILPOE
TEMPERATUREH/M
GLIDE0 ºC
APPLICATION- A&C & Refrigeration
- Automotive- Refrigerated Transport
REPLACEMENT(Retrofit)
R-12
R-404A(KLEA 404A)
kg1,8/5/12/20/50
OILPOE
TEMPERATUREM/L
GLIDE0,5 ºC
APPLICATION- Refrigeration
- Refrigerated Transport
REPLACEMENT(Retrofit)
R-502
R-507(KLEA 507)
kg1,8/5/12/20/50
OILPOE
TEMPERATUREM/L
GLIDE0 ºC
APPLICATION- Refrigeration
REPLACEMENT(Retrofit)
R-502
R-442A(RS-50)
kg1,8/5/12/20/50
OILPOE
TEMPERATUREM/L
GLIDE4,6 ºC
APPLICATION- Refrigeration
REPLACEMENT(Drop-in)
R-404A & R-507
R-428A(RS-52)
kg1,8/5/12/20/50
OILM / AB / POE
TEMPERATUREM/L
GLIDE0,2 ºC
APPLICATION- Refrigeration
- Refrigerated Transport
REPLACEMENT(Drop-in)R-502
R-422A(ISCEON®79)
kg1,8/5/12/20/50
OILM / AB / POE
TEMPERATUREM/L
GLIDE2 ºC
APPLICATION- Refrigeration
REPLACEMENT(Drop-in)R-502
R-417A(ISCEON®59)
kg1,8/5/13/25/55
OILM / AB / POE
TEMPERATUREH/M
GLIDE3,5 ºC
APPLICATION- A&C & Refrigeration
REPLACEMENT(Drop-in)
R-22
R-422D(ISCEON®29)
kg1,8/5/13/25/55
OILM / AB / POE
TEMPERATUREH/M
GLIDE3,0 ºC
APPLICATION- A&C & Refrigeration
REPLACEMENT(Drop-in)
R-22
R-424A(RS-44)
kg1,8/5/14/25/60
OILM / AB / POE
TEMPERATUREH/M
GLIDE3,0 ºC
APPLICATION- A&C & Refrigeration
EXPANSIÓN- Fixed orifice systems
- TXV systems
REPLACEMENT(Drop-in)
R-22
R-434A(RS-45)
kg1,8/5/12/20/50
OILM / AB / POE
TEMPERATUREH/M/L
GLIDE1,5 ºC
APPLICATION- A&C & Refrigeration
- Flooded systems
EXPANSIÓN- TXV systems
REPLACEMENT(Drop-in)
R-22
R-427A(FX-100)
kg1,8/5/13/25/55
OILPOE
TEMPERATUREH/M
GLIDE7,1 ºC
APPLICATION- A&C & Refrigeration
REPLACEMENT(Retrofit)
R-22
R-23
kg11/38
OILPOE
TEMPERATUREVery Low
GLIDE0 ºC
APPLICATION- Refrigeration
REPLACEMENTR-13 & R-503
Barcelona: Tel. 93 223 13 77 - Fax: 93 223 14 79. Madrid: Tel. 91 642 03 45 - Fax: 91 642 03 97. Zaragoza: Tel. 97 614 96 37 - Fax: 97 614 96 36. www.gas-servei.com - E-mail: [email protected]
THE WIDEST RANGE without HCFCs)(1/01/2010
(R-402A, R-402B, R-403B,R-408A, DI-44)
REPLACEMENT R-12 REPLACEMENT R-22REPLACEMENT R-502
(R-406A, R-409A, R-401A,R-401B, DI-36, R-413A, R-416A)
Temperature ºCH= HighM= MediumL= Low
OilM= MineralAB= AlkylbenzenePOE= Polyol ester
Get data sheets, MSDS and conversion processes on our website:
www.gas-servei.com
SUPPLY AND DISTRIBUTION RECOVERY /REGENERATION / DESTRUCTION
ADVICEANALYSIS
Recommended glycolRecommended POE Oil
HFC
s
AR/G-93/2008
Edition 12
01-10-2012
R-407F(Genetron
Performax LT)
kg5/12/20/50
OILPOE
TEMPERATUREM/L
GLIDE4,4 ºC
APPLICATION- Refrigeration
REPLACEMENT(Drop-in)
R-404A & R-507
R-407C(KLEA 407C)
kg1,8/5/13/25/55
OILPOE
TEMPERATUREH/M
GLIDE7,4 ºC
APPLICATION- A&C & Refrigeration
REPLACEMENT(Retrofit)
R-22
R-407A(KLEA 407A)
kg1,8/5/13/25/55
OILPOE
TEMPERATUREM/L
GLIDE4,3 ºC
APPLICATION- Refrigeration
REPLACEMENT(Retrofit)
R-22
R-410A(KLEA 410A)
kg1,8/5/11/20/50
OILPOE
TEMPERATUREA
GLIDE0,5 ºC
APPLICATION- Air Conditioning
R-426A(RS-24)
kg2/5/14/25/60
OILM / AB / POE
TEMPERATUREH/M
GLIDE0,5 ºC
APPLICATION- A&C & Refrigeration
- Automotive- Refrigerated Transport
REPLACEMENT(Drop-in)
R-12
R-437A(Isceon 49 Plus)
kg2/6/15/60
OILM / AB / POE
TEMPERATUREH/M
GLIDE3,6 ºC
APPLICATION- A&C & Refrigeration
- Automotive- Refrigerated Transport
REPLACEMENT(Drop-in)
R-12
R-134A(KLEA 134A)
kg2/6/15/25/60
OILPOE
TEMPERATUREH/M
GLIDE0 ºC
APPLICATION- A&C & Refrigeration
- Automotive- Refrigerated Transport
REPLACEMENT(Retrofit)
R-12
R-404A(KLEA 404A)
kg1,8/5/12/20/50
OILPOE
TEMPERATUREM/L
GLIDE0,5 ºC
APPLICATION- Refrigeration
- Refrigerated Transport
REPLACEMENT(Retrofit)
R-502
R-507(KLEA 507)
kg1,8/5/12/20/50
OILPOE
TEMPERATUREM/L
GLIDE0 ºC
APPLICATION- Refrigeration
REPLACEMENT(Retrofit)
R-502
R-442A(RS-50)
kg1,8/5/12/20/50
OILPOE
TEMPERATUREM/L
GLIDE4,6 ºC
APPLICATION- Refrigeration
REPLACEMENT(Drop-in)
R-404A & R-507
R-428A(RS-52)
kg1,8/5/12/20/50
OILM / AB / POE
TEMPERATUREM/L
GLIDE0,2 ºC
APPLICATION- Refrigeration
- Refrigerated Transport
REPLACEMENT(Drop-in)R-502
R-422A(ISCEON®79)
kg1,8/5/12/20/50
OILM / AB / POE
TEMPERATUREM/L
GLIDE2 ºC
APPLICATION- Refrigeration
REPLACEMENT(Drop-in)R-502
R-417A(ISCEON®59)
kg1,8/5/13/25/55
OILM / AB / POE
TEMPERATUREH/M
GLIDE3,5 ºC
APPLICATION- A&C & Refrigeration
REPLACEMENT(Drop-in)
R-22
R-422D(ISCEON®29)
kg1,8/5/13/25/55
OILM / AB / POE
TEMPERATUREH/M
GLIDE3,0 ºC
APPLICATION- A&C & Refrigeration
REPLACEMENT(Drop-in)
R-22
R-424A(RS-44)
kg1,8/5/14/25/60
OILM / AB / POE
TEMPERATUREH/M
GLIDE3,0 ºC
APPLICATION- A&C & Refrigeration
EXPANSIÓN- Fixed orifice systems
- TXV systems
REPLACEMENT(Drop-in)
R-22
R-434A(RS-45)
kg1,8/5/12/20/50
OILM / AB / POE
TEMPERATUREH/M/L
GLIDE1,5 ºC
APPLICATION- A&C & Refrigeration
- Flooded systems
EXPANSIÓN- TXV systems
REPLACEMENT(Drop-in)
R-22
R-427A(FX-100)
kg1,8/5/13/25/55
OILPOE
TEMPERATUREH/M
GLIDE7,1 ºC
APPLICATION- A&C & Refrigeration
REPLACEMENT(Retrofit)
R-22
R-23
kg11/38
OILPOE
TEMPERATUREVery Low
GLIDE0 ºC
APPLICATION- Refrigeration
REPLACEMENTR-13 & R-503
Barcelona: Tel. 93 223 13 77 - Fax: 93 223 14 79. Madrid: Tel. 91 642 03 45 - Fax: 91 642 03 97. Zaragoza: Tel. 97 614 96 37 - Fax: 97 614 96 36. www.gas-servei.com - E-mail: [email protected]
THE WIDEST RANGE without HCFCs)(1/01/2010
(R-402A, R-402B, R-403B,R-408A, DI-44)
REPLACEMENT R-12 REPLACEMENT R-22REPLACEMENT R-502
(R-406A, R-409A, R-401A,R-401B, DI-36, R-413A, R-416A)
Temperature ºCH= HighM= MediumL= Low
OilM= MineralAB= AlkylbenzenePOE= Polyol ester
Get data sheets, MSDS and conversion processes on our website:
www.gas-servei.com
SUPPLY AND DISTRIBUTION RECOVERY /REGENERATION / DESTRUCTION
ADVICEANALYSIS
Recommended glycolRecommended POE Oil
HFC
s
AR/G-93/2008
The year 2010 was a challenging year because existing R22 (and all HCFCs) systems have to be converted to an HCFC-free refrigerant. It was a busy year, collaborating along with our distribution network, training schools, and sector air conditioning and refrigeration specialists. After all these studies we focus on the drop-in “RS” series from Refrigerant Solutions. The result was that we gave fast, economic, efficient and easy solutions to thousands of installations in Spain, Portugal, France and Italy through the satisfaction of our customers.
Thank you to all these people and companies who have joined us on this journey and help us grow together better day
by day. Our environment requires us to constantly improve and that is why we completed the RS range with the new HFC RS-
50 (R442A). With R442A you can do new installations that previously would have used R404A or R507, and also convert existing systems that are using these products. This new product is more respectful with the environment (Low GWP) and is more efficient reaching energy savings of over 10% power consumption thus reducing CO2 emissions and relieving the economy.
In addition we present the new lightweight steel cylinder of 14.5 l called Xlite which tare weight is 4,5 kg. The cylinder
has a safety valve with liquid pipe. With this package, we reduce transport costs and CO2 emissions. We improved faithful to our principles, technology, quality and SERVICE.
GAS SERVEI S.A.
COMPRESSOR OILS .........................................................................................................................................
BIB-2 ...................................................................................................................................................................
ZITREC HTF ........................................................................................................................................................
COPPER FITTINGS..............................................................................................................................................
BRASS FITTINGS ................................................................................................................................................
EUROREFRIGERANT VIBRATION ABSORBER ..................................................................................................
ESSEN REFRIGERATION BALL VALVE ...............................................................................................................
NGI SAFETY VALVES ..........................................................................................................................................
QUADRA PLASTIC CAPILLARY HOSE ...............................................................................................................
TOOLS .................................................................................................................................................................
GASNETT-23 FLUSHING FLUID i.........................................................................................................................
ECKERLE CONDENSATE PUMPS .....................................................................................................................
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
06-08
08
09 -10
11-13
14-15
16
17
18-19
20-23
24-35
36
37-39
CONTENTS
UNIVERSAL OILS GUIDE
Type of oil RefrigerantViscosity at 40ºC (105ºF)
ApplicationCompressor
model Value
Ester
R-410A R-404AR-507
R-407CR-410AR-134aR-442A
22A/M/B Rotativo
9 Life 22 H
32 9 Life 32 H
22*M/B
Pistones
9 Life 22 H
32 9 Life 32 H
22*
A/M
9 Life 22 H
46 9 Life 46 H
68 9 Life 68 H
170 A/M/B Tornillos Castrol SW 170
R410A22*
A/M/B Scroll9 Life 22 H
32 9 Life 32 H
Mineral R-2232 M/B
PistonesSuniso 3GS
57 A/M Suniso 4GS
* (Copeland)
A = HighM = MediumB = Low
Gas Servei, S.A. offers a full range of the highest quality polyolester oils (POE) according to the requirements of compressor manu-facturers. Our range approval list:
Americold, Atlant, Arctic, Axima, Bitzer, Blissfi eld, Bock, Borsig, Bristol, Calex, Carlyle, Carrier, Carrier Transicold, Climate Control, Daikin, Dorin, Dunham Bush, Ebara, ERC, Facosa, Frascold, Frigidaire, Frigopol, Frigus Bohn, Gelpha, Gram, Grasso, HKT, Kazan, Kirby, Mayekawa, Mycom, Nord, Refcomp, Sabroe, Tecumseh, Termomecánica, Topre, Toyo Carrier and York. Gas Servei, S.A. recommends that users confirm with the original equipment manufacturer (OEM) or our technical department which oil grade is qualified for use with a particular combination of compressor model, refrigerant and application.
Castrol SW
Code Capacity (l) Viscosity Packing quantity Price (€/l)
CASISW32005 5 32 4 25,00
CASISW32020 20 32 - 25,00
CASISW46005 5 46 4 25,00
CASISW68005 5 68 4 25,00
CASISW10005 5 100 4 26,66
CASISW15005 5 170 4 26,66
CASISW15020 20 170 - 26,66
CASISW220005 5 220 4 26,66
CASISW22020 20 220 - 26,66
COMPRESSOR OILS
High performance synthetic polyol-ester oils (POE)
9 Life H
Code Capacity (l) Viscosity Packing quantity Price (€/l)
9LIFE22001 1 22 12 23,00
9LIFE22005 4 22 6 21,00
9LIFE32001 1 32 12 23,00
9LIFE32005 4 32 6 21,00
9LIFE32020 20 32 - 20,00
9LIFE32200 208 32 - 18,50
9LIFE46005 4 46 6 21,00
9LIFE68001 1 68 12 23,00
9LIFE68005 4 68 6 21,00
9LIFE68020 20 68 - 20,00
9LIFE68208 208 68 - 18,50
9LIFE10001 1 100 12 23,00
9LIFE10005 4 100 6 21,00
9LIFE10020 20 100 - 20,00
9LIFE100208 208 100 - 18,50
06
NEW OIL ANALYSIS SERVICE DETECTED+ Gas-Servei S.A. has a new system called DETECTED+.
DETECTA+ is a whole new operating infrastructure maintenance predictive analysis of lubricants by service. This new service allows you to prevent breakdowns and downtime of your equipment, avoiding losses production and saving you time and money.
The new system DETECTA+ will provide: + A detailed diagnosis on the state of the lubricant. + Relevant information about the state of their equipment and machinery. + Maintenance Tips.
ADVANTAGES AND BENEFITS SAVE TIME + Minimizes risk of unscheduled downtime. + Improve the production process. + Avoid unnecessary maintenance. + Improved maintenance. SAVE MONEY + Increases the life of your equipment. + Controls the conditions of the equipment under warranty. + Reduces maintenance costs. + Optimizes the service life of the lubricant.
Analysis price: 177,78€
Alkyl-benzene Oils
Reniso Triton SEZ
Code Capacity (l) Viscosity Packing quantity Price (€/l)
LUBRSE55001 1 55 20 37,30
LUBRSE55005 5 55 6 31,15
LUBRSE55010 10 55 - 29,95
Code Model Capacity (l) Viscosity Packing quantity Price (€/l)
LUBZEROL150 Zerol 150 (≈Bitzer 5.2) 3,79 30 6 14,25
CASIZL150020 Castrol ZL 150 (semisintético) 20 32 - 14,00
LUBSNAB32020 Suniso AB 32 20 32 - 10,25
LUBSNAB32060 Suniso AB 32 60 32 - 10,25
LUBSNAB32205 Suniso AB 32 205 32 - 10,25
LUBSNAB46020 Suniso AB 46 20 46 - 10,25
LUBSNAB46060 Suniso AB 46 60 46 - 10,25
LUBSNAB46205 Suniso AB 46 205 46 - 10,25
LUBSNAB68020 Suniso AB 68 20 68 - 10,70
LUBSNAB68060 Suniso AB 68 60 68 - 10,70
LUBSNAB68205 Suniso AB 68 205 68 - 10,70
LUBSNAB100020 Suniso AB 100 20 100 - 13,12
LUBSNAB100060 Suniso AB 100 60 100 - 13,12
LUBSNAB100205 Suniso AB 100 205 100 - 13,12
Suitable with CFCs & HCFCs.
07
Mineral Oils
Code Capacity (l) Viscosity Packing quantity Price(€/l)
LUBSN3GS005 4 33 6 8,97
LUBSN3GS020 20 33 - 8,77
LUBSN3GS220 208 33 - 8,30
LUBSN4GS005 4 68 6 8,97
LUBSN4GS020 20 68 - 8,77
LUBSN4GS220 208 68 - 8,30
Suitable with CFCs & HCFCs.
Suniso 3GS & 4GS
Emkarate RL H
Code Capacity (l) Viscosity Packing quantity Price (€/l)
YKMRL32H001 1 32 12 30,00
YKMRL32H005 5 32 4 28,00
YKMRL32H020 20 32 - 26,72
YKMRL32-3MAF01 1 31 12 31,70
YKMRL32-3MAF05 5 31 4 27,46
Gama completa de gases refrigerantes en envases de aluminio recargables
> Follows the European directive 842/2006 and EN1975/2000.> Perfect for small systems and available with all our refrigerant range.> PH 47 bar / 2,10 l capacity & 0,95 kg tare weight> Full protected valve connection of 1/4”.
Code Refrigerant Unit price (€/pc)
S4400002K R424A (1,8kg) consultar
F410A002K R410A (1,8 kg) consultar
F47C0002K R407C (1,8 kg) consultar
F47C0002K R404A (1,8 kg) consultar
I5900002K R417A (2 kg) consultar
Refillable Cylindres with Refrigerant BIB-2
Para otros refrigerantes, consultar
Full range of accessories to charge systems with BIB-2. Controlled charge and minimum refrigerant lost!
BIB-2 accessories
3 possible charging types
Code Description Unit price (€/pc)
1. Direct and regulated flow
OXY33002 Lock-valve of 1/4” 16,25
OXY33007 Lock-valve of 5/16” 16,75
2. Precision and controlled charge
OXYEC2000 Mini Electronic Refrigerant Charging Scale (Up to 5 kg) 126,00
OXYCA-300 ball-valve fitting for Mini scale, 1/4” 19,50
OXYCA-400 ball-valve fitting for Mini scale, 5/16” 19,75
3. Stable charge for all scales
OXY1020 Charging supporter 35,00
1
2
3
08
OILCHECK-HVAC
Code Model Unit price (€/pc)
OXYOILCHECK Instrumento de diagnosis para sistemas HVAC 450,00
The diagnosis instrument OILCHECK-HVAC enables to check the “health” of your HVAC system, simply by connecting to the high and low pressure connections.The oil and the oil/refrigerant mixture will be easily visible inside the glass cylinder. Oil miscibility with refrigerant, oil quality and possible water content or contaminating particles can be analyzed visually, so that you can intervene afterwards with suitable systems. The discharge valve, thanks to its considerable internal section, enables to drain easily the possible contaminants.Furthermore, OILCHECK-HVAC allows to take oil samples for analysis with suitable instruments.
BIB-2
Equipped with:> 2 flexible hoses 1500 mm (blue and red) with valve.> Sturdy plastic case.
MAX-FLOWTM COMBINATION OIL PUMP
Code Model Unit price (€/pc)
RIT77940 Pump Oil 176,00
Pump oil into the compressor on the stroke while the system is under pressure, making pumping easier with a positive stroke. Pumps 78 ml per stroke.
COMPRESSOR OILS
ZITREC HTF
Zitrec MC: is a heat transfer fluid based on ethylene glycol (MEG) with organic inhibitors (OAT). Zitrec MC has a wide range of appli-cations from solar panels or heat pump systems, over cooling or heating of industrial processes and refrigerants in indirect cooling systems to artificial ski-tracks or ice rings. Zitrec MC provides protection against boiling, freezing and corrosion. It is compatible with most other heat transfer fluids based on ethylene glycol. Not recommended for installations with possibility of incidental food contact.
(For other dilutions or bulk delivery contact us)
Zitrec: Larga estabilidad del glicol, bajos costes de mantenimiento de la instalación.Many applications in the industry require a fluid to transport heat or cold. Those applications range from solar panels or heat pump systems, over cooling or heating of industrial processes and refrigerants in indirect cooling systems to artificial ski-tracks or ice rigs. This transport medium is usually called secondary refrigerant or secondary coolant. The ideal secondary refrigerant must ensure a good thermal conductivity, have a high specific heat and low viscosity. It is also important that the secondary refrigerant is non-flammable and compatible with common engineering materials. Zitrec range of products like Zitrec MC, Zitrec LC, Zitrec FC and Freezium provide protection against corrosion, freezing and boiling in each application. The dilution is determined by system requirements, mainly freezing requirements. However, to ensure good co-rrosion protection it is recommended to use at least 30 vol. % of Zitrec.
What makes Zitrec an excellent choice?: Zitrec OAT inhibitors/Carboxylate technology 1) Selective inhibitors a) Does not use phosphate, nitrites, nitrates, borates, amines, silicates or chromates! i) Therefore no adverse effects on elastomers, ii) No pump damage by abrasive or erosiveness of the inhbitors b) No scaling, fouling or flow interference, and therefore: c) No interference with heat transfer: keeps thermal efficiency up to its original level!2) Stops corrosion quickly3) Long life effect d) No yearly additions of inhibitors e) Hardly any depletion4) Protects ALL metals, not only steel!5) Has the unique capacity to protect the glycol molecule from breaking down under tough thermal loads.
Code Freezing point Concentrate vol%
Packaging (liter) Price (€/l)
Zitrec MC Concentrado A diluir - 25, 210, 1000 consultar
Zitrec M-20 Ready to use - 20 ºC 33% 25, 210, 1000 consultar
Zitrec M-30 Ready to use - 30 ºC 43,8% 25, 210, 1000 consultar
Zitrec M-40 Ready to use - 40 ºC 52,4% 25, 210, 1000 consultar
Code Freezing point Concentrate vol%
Packaging (liter) Price(€/l)
Zitrec LC Concentrado A diluir - 25, 210, 1000 consultar
Zitrec L-17 Ready to use - 17 ºC 35% 25, 210, 1000 consultar
Zitrec L-30 Ready to use - 30 ºC 47,6% 25, 210, 1000 consultar
Zitrec L-40 Ready to use - 40 ºC 54,1% 25, 210, 1000 consultar
Zitrec MC:
Zitrec LC:Zitrec LC: a heat transfer fluid based on propylene glycol (MPG) with organic inhibitors (OAT). Zitrec LC has a wide range of appli-cations from solar panels or heat pump systems, over cooling or heating of industrial processes and refrigerants in indirect cooling systems to artificial ski-tracks or ice rings. Zitrec LC provides protection against boiling, freezing and corrosion. It is compatible with most other heat transfer fluids based on propylene glycol.
(For other dilutions or bulk delivery contact us)
09
Los inhibidores multimetal Zitrec (OAT) anti-corrosión actúan únicamente en el punto donde se inicia la corrosión. Los inhibidores tradicionales crean depósitos en toda la instalación que disminuyen la transferencia de calor, aumentando así el consumo eléctrico y pudiendo llegar a averiar las bombas.
New Technology
Traditional inhibition Strategy
Zitrec FC – a heat transfer fluid based on USP propylene glycol (MPG) using FDA approved ingredients. Zitrec FC is found acceptable by NSF International for use as a heat transfer fluid where there is the possibility of incidental food contact. Defrosting, cooling and freezing are frequently part of an entire food chain process. In these applications, Zitrec FC and its dilutions are especially useful. Some typical examples include the cooling in the beverage industries such as the cooling of wine, beer, milk and juices. But also during the brewing process, the cooling of fermentation and wort tanks is essential and Zitrec FC will provide here the necessary heat transfer. Further in the chain, Zitrec FC can be used during the bottling process of carbonated beverages, such as champagne or beer, preventing as such loss of carbonation. Zitrec FC provides protection against boiling,freezing and corrosion in each application. It is compatible with most other heat transfer fluids based on propylene glycol.
Zitrec IC is a water-based superconcentrate of organic inhibitors, which requires dilution at concentration levels between 3 and 6% before final use. This low dosage, in combination with the all-round protection Zitrec IC delivers, makes it an excellent economical solution.Zitrec IC is used in heating and cooling systems in both domestic and industrial applicationsusing water or a glycol/water mixture. Zitrec IC is also suitable to inhibit fluids used in heat pumps, floor heating systems and airconditioning units.
Code Freezing point Concentrate vol%
Packaging (liter) Price (€/l)
Zitrec FC Concentrate A diluir - 25, 210, 1000 consultar
Zitrec F-15 Ready to use - 15 ºC 31% 25, 210, 1000 consultar
Zitrec F-30 Ready to use - 30 ºC 46% 25, 210, 1000 consultar
Zitrec F-40 Ready to use - 40 ºC 52,2% 25, 210, 1000 consultar
Code Freezing Point Concentrate vol%
Packaging (liter) P.V.P.(€/l)
Freezium Concentrado - 60 ºC - 25, 210, 1000 consultar
Freezium-20 Ready to use - 20 ºC 51% 25, 210, 1000 consultar
Freezium-30 Ready to use - 30 ºC 68% 25, 210, 1000 consultar
Freezium-40 Ready to use - 40 ºC 82% 25, 210, 1000 consultar
Zitrec FC:
Freezium:Freezium is an organic heat-transfer fluid based on pure potassium formate. Freezium has been developed specifically for indirect cooling systems and heat pumps. Freezium provides protection against boiling, freezing and corrosion. It remains completely fluid even if the pipe work is frozen. It is also important that the secondary refrigerant is non-flammable and compatible with common engineering materials.Mixing Freezium with other heat transfer fluids is not recommended. Specifically special care should be taken with calcium chloride, as this can increase significantly the risk of corrosion.Yourselves dilution is not recommended. It is recommended to avoid using Freezium in installations containing Aluminum, Zinc or galvanized steel.
Code Dilution vol (%) Packaging (liter) Price (€/l)
Zitrec IC 3 - 6 25, 210, 1000 consultar
Zitrec IC:
BenefitsMost water systems suffer from many different types of corrosion. Zitrec IC dilutions or Zitrec IC added to water/glycol systems offer the following benefits to the user:> All round corrosion protection through synergistic combination of additives> Non-scaling additives thanks to the absence of mineral inhibitors> No yearly additions required> Non-hazardous product> Compatible with common seal materials> Stable in hard water thanks to the absence of silicates & phosphates> Exempt from borates and not classified under the criteria of Directive 1999/45/EC
10
ZITREC HTF
(For other dilutions or bulk delivery contact us)
(For other dilutions or bulk delivery contact us)
Copper fittings ASME B 16,22
Code Size Packing quantity Unit price (€/pc)
ACCCUR01/4 1/4” 25 0,89
ACCCUR03/8 3/8” 25 1,07
ACCCUR01/2 1/2” 25 1,20
ACCCUR05/8 5/8” 25 1,11
ACCCUR03/4 3/4” 25 1,44
ACCCUR07/8 7/8” 10 1,96
ACCCUR1 1” 10 3,44
ACCCUR11/8 1 1/8” 10 3,24
ACCCUR13/8 1 3/8” 35 4,56
ACCCUR15/8 1 5/8” 20 6,89
ACCCUR21/8 2 1/8” 10 14,76
ACCCUR25/8 2 5/8” 12 31,44
ACCCUR31/8 3 1/8” 8 46,67
Code Size Flare Packing quantity Unit price (€/pc)
ACCCURM-H01/4 1/4” 25 1,29
ACCCURM-H03/8 3/8” 25 1,29
ACCCURM-H01/2 1/2” 25 2,44
ACCCURM-H05/8 5/8” 25 2,09
ACCCURM-H03/4 3/4” 25 2,38
ACCCURM-H07/8 7/8” 10 2,44
ACCCURM-H1 1” 10 4,67
ACCCURM-H11/8 1 1/8” 10 4,29
ACCCURM-H13/8 1 3/8” 35 5,78
ACCCURM-H15/8 1 5/8” 20 9,22
ACCCURM-H21/8 2 1/8” 10 16,33
ACCCURM-H25/8 2 5/8” 12 31,56
ACCCURM-H31/8 3 1/8” 6 51,78
Code Size Packing quantity Unit price (€/pc)
ACCCODO01/4 1/4” 25 0,56
ACCCODO03/8 3/8” 25 0,56
ACCCODO01/2 1/2” 25 0.67
ACCCODO05/8 5/8” 25 0,67
ACCCODO03/4 3/4” 25 1,51
ACCCODO07/8 7/8” 25 1,11
ACCCODO11/8 1 1/8” 10 1.78
ACCCODO13/8 1 3/8” 50 2,98
ACCCODO15/8 1 5/8” 30 4,56
ACCCODO21/8 2 1/8” 15 8,11
ACCCODO25/8 2 5/8” 18 14,44
ACCCODO31/8 3 1/8” 8 24,93
Code Size Packing quantity Unit price (€/pc)
ACCCUR4501/4 1/4” 25 1,33
ACCCUR4503/8 3/8” 25 1,42
ACCCUR4501/2 1/2” 25 1,09
ACCCUR4505/8 5/8” 25 0,67
ACCCUR4503/4 3/4” 25 2,07
ACCCUR4507/8 7/8” 25 1,22
ACCCUR451 1” 10 2,00
ACCCUR4511/8 1 1/8” 10 2,58
ACCCUR4513/8 1 3/8” 50 3,58
ACCCUR4515/8 1 5/8” 30 4,71
ACCCUR4521/8 2 1/8” 15 7,31
ACCCUR4525/8 2 5/8” 18 16,07
ACCCUR4531/8 3 1/8” 12 21,44
Code Size Packing quantity Unit price (€/pc)
ACCCODOMH01/2 1/2” 25 0,67
ACCCODOMH05/8 5/8” 25 0,60
ACCCODOMH07/8 7/8” 25 1,29
ACCCODOMH11/8 1 1/8” 10 2,56
ACCCODOMH13/8 1 3/8” 50 4,22
ACCCODOMH15/8 1 5/8” 30 6,11
ACCCODOMH21/8 2 1/8” 15 11,49
ACCCODOMH25/8 2 5/8” 16 22,33
ACCCODOMH31/8 3 1/8” 41,78
11
90º LONG RADIUS ELBOW
90º LONG RADIUS STREET ELBOW FTG-C
45º LONG RADIUS ELBOW C-C
90º EQUAL ELBOW C-C
90º STREET ELBOW FTG-C
COPPER FITTINGS
Code Size Packing quantity Unit price (€/pc)
ACCMAN01/4 1/4” 25 0,27
ACCMAN03/8 3/8” 25 0,27
ACCMAN01/2 1/2” 25 0,33
ACCMAN05/8 5/8” 25 0,29
ACCMAN03/4 3/4” 25 0,64
ACCMAN07/8 7/8” 25 0,56
ACCMAN1 1” 10 1,38
ACCMAN11/8 1 1/8” 10 1,07
ACCMAN13/8 1 3/8” 90 1,91
ACCMAN15/8 1 5/8” 60 2,49
ACCMAN21/8 2 1/8” 30 4,16
ACCMAN25/8 2 5/8” 40 8,91
ACCMAN31/8 3 1/8” 25 10,89
Code Size Flare Packing quantity Unit price (€/pc)
ACCTAPON01/4 1/4” 25 0,33
ACCTAPON03/8 3/8” 25 0,33
ACCTAPON01/2 1/2” 25 0,44
ACCTAPON05/8 5/8” 25 0,33
ACCTAPON03/4 3/4” 25 0,58
ACCTAPON07/8 7/8” 25 0,58
ACCTAPON11/8 1 1/8” 10 1,04
ACCTAPON13/8 1 3/8” 30 1,56
ACCTAPON15/8 1 5/8” 50 2,29
ACCTAPON21/8 2 1/8” 60 4,10
ACCTAPON25/8 2 5/8” 35 12,47
ACCTAPON31/8 3 1/8” 15 22,07
CAP CUNION
EQUAL TEE Code Size Packing quantity Unit price (€/pc)
ACCTE01/4 1/4” 25 1,16
ACCTE03/8 3/8” 25 1,04
ACCTE01/2 1/2” 25 1,16
ACCTE05/8 5/8” 25 0,71
ACCTE03/4 3/4” 25 2,44
ACCTE07/8 7/8” 10 1,69
ACCTE1 1” 10 4,00
ACCTE11/8 1 1/8” 10 4,07
ACCTE13/8 1 3/8” 35 4,78
ACCTE15/8 1 5/8” 20 9,22
ACCTE21/8 2 1/8” 12 15,31
ACCTE25/8 2 5/8” 13 29,33
ACCTE31/8 3 1/8” 8 36,89
Code Size Packing quantity Unit price (€/pc)
ACCCUR18001/4 1/4” 25 1,00
ACCCUR18003/8 3/8” 25 1,04
ACCCUR18001/2 1/2” 25 1,33
ACCCUR18005/8 5/8” 25 2,56
ACCCUR18003/4 3/4” 20 4,33
ACCCUR18007/8 7/8” 70 5,56
ACCCUR18011/8 1 1/8” 30 11,33
ACCCUR18013/8 1 3/8” 12 16,78
ACCCUR18015/8 1 5/8” 8 18,67
ACCCUR18021/8 2 1/8” 6 50,58
Code Size Packing quantity Unit price (€/pc)
ACCSIFON05/8 5/8” 10 8,67
ACCSIFON03/4 3/4” 60 10,00
ACCSIFON07/8 7/8” 35 11,67
ACCSIFON11/8 1 1/8” 10 15,11
ACCSIFON13/8 1 3/8” 9 25,00
ACCSIFON15/8 1 5/8” 8 43,27
ACCSIFON21/8 2 1/8” 6 77,78
U-BENDC-C
P-TRAP
12
COPPER FITTINGS
Code Description Packing quantity Unit price (€/pc)
ACCT24002 Reduction 3/8” x 1/4” 25 0,51
ACCT24004 Reduction 1/2” x 1/4” 25 0,51
ACCT24006 Reduction 1/2” x 3/8” 25 0,56
ACCT24008 Reduction 5/8” x 1/4” 25 0,51
ACCT24010 Reduction 5/8” x 3/8” 25 0,51
ACCT24012 Reduction 5/8” x 1/2” 25 0,51
ACCT24014 Reduction 3/4” x 3/8” 25 0,93
ACCT24016 Reduction 3/4” x 1/2” 25 0,93
ACCT24018 Reduction 3/4” x 5/8” 25 0,93
ACCT24020 Reduction 7/8” x 1/2” 25 0,93
ACCT24022 Reduction 7/8” x 5/8” 25 0,93
ACCT24024 Reduction 7/8” x 3/4” 25 0,93
ACCT24026 Reduction 1 1/8” x 1/2” 10 1,44
ACCT24028 Reduction 1 1/8” x 5/8” 10 1,69
ACCT24030 Reduction 1 1/8” x 3/4” 10 1,69
ACCT24032 Reduction 1 1/8” x 7/8” 10 1,69
ACCT24034 Reduction 1 3/8” x 5/8” 100 2,22
ACCT24036 Reduction 1 3/8” x 3/4” 125 2,31
ACCT24038 Reduction 1 3/8” x 7/8” 125 2,36
ACCT24040 Reduction 1 3/8” x 1 1/8” 125 2,27
ACCT24042 Reduction 1 5/8” x 5/8” 75 3,67
ACCT24046 Reduction 1 5/8” x 7/8” 75 3,91
ACCT24048 Reduction 1 5/8” x 1 1/8” 75 3,67
ACCT24050 Reduction 1 5/8” x 1 3/8” 60 3,76
ACCT24052 Reduction 2 1/8” x 1 1/8” 50 6,11
ACCT24054 Reduction 2 1/8” x 1 3/8” 35 5,56
ACCT24056 Reduction 2 1/8” x 1 5/8” 35 5,58
ACCT24058 Reduction 2 5/8” x 1 1/8” 40 10,31
ACCT24060 Reduction 2 5/8” x 1 3/8” 40 10,16
ACCT24062 Reduction 2 5/8” x 1 5/8” 40 9,76
ACCT24064 Reduction 2 5/8” x 2 1/8” 40 12,71
ACCT24066 Reduction 3 1/8” x 2 1/8” 30 13,00
ACCT24068 Reduction 3 1/8” x 2 5/8” 30 13,00
Code Description Packing quantity Unit price (€/pc)
ACCT24302 Reduction M-F 3/8” x 1/4” 25 0,49
ACCT24304 Reduction M-F 1/2” x 1/4” 25 0,49
ACCT24306 Reduction M-F 1/2” x 3/8” 25 0,49
ACCT24310 Reduction M-F 5/8” x 3/8” 25 0,67
ACCT24312 Reduction M-F 5/8” x 1/2” 25 0,67
ACCT24314 Reduction M-F 3/4” x 3/8” 25 0,87
ACCT24316 Reduction M-F 3/4” x 1/2” 25 0,87
ACCT24318 Reduction M-F 3/4” x 5/8” 25 0,87
ACCT24320 Reduction M-F 7/8” x 3/8” 25 1,04
ACCT24322 Reduction M-F 7/8” x 1/2” 25 1,04
ACCT24324 Reduction M-F 7/8” x 5/8” 25 1,04
ACCT24326 Reduction M-F 7/8” x 3/4” 25 1,04
ACCT24328 Reduction M-F 1 1/8” x 1/2” 10 1,53
ACCT24330 Reduction M-F 1 1/8” x 5/8” 10 1,58
ACCT24332 Reduction M-F 1 1/8” x 3/4” 10 1,58
ACCT24334 Reduction M-F 1 1/8” x 7/8” 10 1,58
ACCT24336 Reduction M-F 1 3/8” x 7/8” 125 2,44
ACCT24338 Reduction M-F 1 3/8” x 1 1/8” 125 2,44
ACCT24340 Reduction M-F 1 5/8” x 1 1/8” 80 3,56
ACCT24342 Reduction M-F 1 5/8” x 1 3/8” 75 3,56
ACCT24344 Reduction M-F 2 1/8” x 1 1/8” 50 6,33
ACCT24346 Reduction M-F 2 1/8” x 1 3/8” 50 6,33
ACCT24348 Reduction M-F 2 1/8” x 1 5/8” 35 6,33
ACCT24349 Reduction M-F 2 5/8” x 1 3/8” 40 14,44
ACCT24350 Reduction M-F 2 5/8” x 1 5/8” 40 12,67
ACCT24352 Reduction M-F 2 5/8” x 2 1/8” 80 12,67
ACCT24354 Reduction M-F 3 1/8” x 2 1/8” - 16,89
Code Description Packing quantity Unit price (€/pc)
ACCT13020 Reducing Tee 1/4” x 1/4” x 3/8” 25 3,55
ACCT13024 Reducing Tee 3/8” x 3/8” x 1/2” 25 3,47
ACCT13028 Reducing Tee 1/2” x 1/2” x 5/8” 25 2,67
ACCT13030 Reducing Tee 5/8” x 5/8” x 1/2” 25 2,93
ACCT13032 Reducing Tee 5/8” x 5/8” x 3/4” 25 4,09
ACCT13034 Reducing Tee 5/8” x 5/8” x 7/8” 25 2,73
ACCT13036 Reducing Tee 3/4” x 3/4” x 7/8” 25 3,11
ACCT13038 Reducing Tee 7/8” x 7/8” x 1 1/8” - 5,11
ACCT13040 Reducing Tee 1 1/8” x 1 1/8” x 7/8” 60 4,49
ACCT13041 Reducing Tee 1 1/8” x 1 1/8” x 1 3/8” 60 11,00
ACCT13042 Reducing Tee 1 3/8” x 1 3/8” x 5/8” 50 6,67
ACCT13044 Reducing Tee 1 3/8” x 1 3/8” x 1 1/8” 35 7,09
ACCT130444 Reducing Tee 1 3/8” x 1 1/8” x 1 3/8” 35 10,51
ACCT13045 Reducing Tee 1 3/8” x 1 1/8” x 1 1/8” 35 10,00
ACCT13046 Reducing Tee 1 3/8” x 1 3/8” x 1 5/8” 20 14,73
ACCT13047 Reducing Tee 1 5/8” x 1 3/8” x 1 3/8” - 16,18
ACCT130477 Reducing Tee 1 5/8” x 1 5/8” x 1 1/8” - 9,27
ACCT13048 Reducing Tee 1 5/8” x 1 5/8” x 1 3/8” - 7,69
ACCT13050 Reducing Tee 1 5/8” x 1 5/8” x 2 1/8” 10 28,93
ACCT13052 Reducing Tee 2 1/8” x 2 1/8” x 1 5/8” 12 12,33
ACCT13054 Reducing Tee 2 1/8” x 1 5/8” x 2 1/8” 12 13,33
ACCT13055 Reducing Tee 2 1/8” x 2 1/8” x 2 5/8” 12 23,93
ACCT13058 Reducing Tee 2 5/8” x 1 5/8” x 2 5/8”
12 48,89
REDUCING TEE
13
REDUCTIONSFITTINGS F-F
REDUCTIONSFITTINGS M-F
Code Size Flare Unit price (€/pc)
YFGNS4-04 1/4” 0,50
YFGNS4-05 5/16” 1,05
YFGNS4-06 3/8” 0,75
YFGNS4-08 1/2” 1,22
YFGNS4-10 5/8” 1,75
YFGNS4-12 3/4” 3,10
FLARE NUT
Code Size Flare Unit price (€/pc)
YFGU2-04 1/4” 0,67
YFGU2-05 5/16” 1,55
YFGU2-06 3/8” 1,15
YFGU2-08 1/2” 1,90
YFGU2-10 5/8” 2,90
YFGU2-12 3/4” 4,40
UNION FLARED
Code Size Flare Unit price (€/pc)
YFGU4-04 1/4” 1,70
YFGU4-05 5/16” 4,20
YFGU4-06 3/8” 2,30
YFGU4-08 1/2” 3,20
YFGU4-10 5/8” 4,00
Code Size Flare Unit price (€/pc)
YFGUR2-064 1/4” x 3/8” 1,65
YFGUR2-084 1/4” x 1/2” 2,30
YFGUR2-086 3/8” x 1/2” 2,30
YFGUR2-106 3/8” x 5/8” 3,00
YFGUR2-108 1/2” x 5/8” 3,45
YFGUR2-128 1/2” x 3/4” 5,60
YFGUR2-1210 5/8” x 3/4” 5,90
Code Size Flare Unit price (€/pc)
YFGUR3-0046 1/4” x 3/8” 2,00
YFGUR3-0048 1/4” x 1/2” 2,45
YFGUR3-064 3/8” x 1/4” 1,85
YFGUR3-0068 3/8” x 1/2” 2,80
YFGUR3-084 1/2” x 1/4” 2,50
YFGUR3-086 1/2” x 3/8” 2,80
YFGUR3-0810 1/2” x 5/8” 3,85
YFGUR3-108 5/8” x 1/2” 3,95
YFGUR3-1012 5/8” x 3/4” 6,00
YFGUR3-1210 3/4” x 5/8” 5,48
REDUCING UNION FLARED
COUPLING FLARE UNION
MALE TO FEMALE FLAREUNION
Code Size flare x Size tube Unit price (€/pc)
YFGNRS4-064 3/8” x 1/4” 1,11
YFGNRS4-086 1/2” x 3/8” 1,42
YFGNRS4-108 5/8” x 1/2” 1,88
YFGNRS4-110 3/4” x 5/8” 3,75
REDUCING FLARE NUT
Code Flare x NPTFE Unit price (€/pc)
YFGU1-04A 1/4” x 1/8” 0,90
YFGU1-04B 1/4” x 1/4” 1,10
YFGU1-04C 1/4” x 3/8” 2,28
YFGU1-06B 3/8” x 1/4” 2,15
YFGU1-06C 3/8” x 3/8” 2,30
YFGU1-06D 3/8” x 1/2” 3,30
YFGU1-08B 1/2” x 1/4” 3,00
YFGU1-08C 1/2” x 3/8” 3,00
YFGU1-08D 1/2” x 1/2” 3,45
YFGU1-10C 5/8” x 3/8” 3,65
YFGU1-10D 5/8” x 1/2” 3,80
YFGU1-10E 5/8” x 3/4” 7,30
YFGU1-12E 3/4” x 3/4” 7,35
HALF UNION - FLARE to NPTFE
14
BRASS FITTINGS
REDUCING FLARE NUT
HALF UNION - FLARE to NPTFE
Code Size Flare Unit price (€/pc)
YFGE2-04 1/4” 1,90
YFGE2-05 5/16” 2,50
YFGE2-06 3/8” 2,50
YFGE2-08 1/2” 3,00
YFGE2-10 5/8” 3,90
YFGE2-12 3/4” 9,00
Code Size Flare Unit price (€/pc)
YFGN5-04 1/4” 0,62
YFGN5-05 5/16” 0,99
YFGN5-06 3/8” 1,20
YFGN5-08 1/2” 1,84
YFGN5-10 5/8” 2,50
Code Size Flare Unit price (€/pc)
YFGT2-04 1/4” 2,60
YFGT2-05 5/16” 2,60
YFGT2-06 3/8” 4,00
YFGT2-08 1/2” 5,20
YFGT2-10 5/8” 6,30
YFGT2-12 3/4” 9,00
Code Size Flare Unit price (€/pc)
YFGP2-04 1/4” 0,70
YFGP2-05 5/16” 1,80
YFGP2-06 3/8” 1,28
YFGP2-08 1/2” 1,65
YFGP2-10 5/8” 2,40
YFGP2-12 3/4” 4,15
UNION FLARED ELBOW
FLARED PLUG
UNION TEE FLARED
FLARE CAP
Capillary adaptorsCode ØD Flare L (mm) Depressor Unit price (€/pc)
OXY-900M1 1/4” 1000 No 5,00
OXY-900M15 1/4” 1500 No 5,40
OXY-900M15D 1/4” 1500 Yes 6,12
Code Ref. Description Packing Quantity Unit price (€/pc)
YFGVAL0001 1 Complete 1/4” Flare union valve with 10 cm copper tube 100 1,48
YFG888/4P46 2 Union 1/4” Flare x O.D.S. 25 0,47
YFG888/4P14 - Complete Union 1/4” Flare x O.D.S 25 0,96
YFG886 - 1/8” Flare x 1/8” NPT union 25 1,10
YFG888/C - Complete 1/8” Flare x 1/8” NPT union 25 1,58
YFG885 - SAE 1/4” Flare union 25 0,60
YFG888/4P46MON - Complete SAE 1/4” Flare union 25 1,22
YFG900 8 Internal core 50 0,40
YFG905/01 9 Brass cap 25 0,43
UNIONS FLARE X O.D.S
1 2 8 9
15
Eurorefrigerants Flex Vibration absorbers are designed for installation in the suction and discharge lines of Air conditioning and Refrigeration system to dampen the transmission of compressor-induced vibration through system piping. Each unit is constructed of a deep pitch corrugated tubing for in-creased flexibility and vibration absorption, covered by a high tensile wire braid for superior strength. Tubing and braid are reinforced by ferrules at each end and connected to female copper tube ends by a high temperature braze alloy.
Corrugated Tube Wire Braid Grooved Ferrule Ferrule Tube End
AISI-304 Stainless Steel AISI-304 Stainless Steel AISI-304 Stainless Steel AISI-304 Stainless Steel Copper
Code Actual OP of copper
tubing (inch)
Dimension (mm) Thickness (mm) Máx. Working Pressure Kg/cm2
Burst Pressure Kg/cm2
A (I.D ±0.05) B (±3) C (±3) D (±6) E
(±1.5) Tube End Corrugated Tube Wire Braid
YAV01/4 1/4” 6,7 17 133 202 10 1,00 0,20 0,30 45,7 228,50
YAV03/8 3/8” 9,6 18 141 215 10 1,00 0,20 0,30 45,7 228,50
YAV01/2 1/2” 12,8 18 151 225 10 1,00 0,20 0,30 45,7 228,50
YAV05/8 5/8” 16,2 20 169 247 10 1,00 0,30 0,30 45,7 228,50
YAV03/4 3/4” 19,2 23 180 266 11 1,20 0,30 0,30 45,7 228,50
YAV07/8 7/8” 22,5 25 211 301 11 1,50 0,30 0,30 45,7 228,50
YAV11/8 1-1/8” 28,8 32 223 329 12 1,50 0,30 0,40 45,7 228,50
YAV13/8 1-3/8” 35,3 35 274 392 14 1,50 0,30 0,40 42,18 210,92
YAV15/8 1-5/8” 41,7 40 295 425 16 1,60 0,30 0,50 39,37 196,86
YAV21/8 2-1/8” 54,5 50 370 520 16 1,60 0,40 0,60 31,64 158,19
YAV25/8 2-5/8” 67,0 60 434 613 19 2,00 0,45 0,60 28,12 140,61
YAV31/8 3-1/8” 79,6 70 481 680 19 2,50 0,45 0,65 24,61 123,04
Vibration Absorber
Material Specifications
Dimensional Specification
Tube EndGrooved Ferrule Ferrule Corrugated Tube Climped Joint
Brazed Joint
Welded JointWire Braid
Specifications: > Twelve model available to fit copper tubing from 1/4 through 3 1/8 inches O.D.> Each unit securely brazed, pressure and vacuum tested, cleaned, dehydrated and sealed in plastic wrap> Stainless steel corrugated tubing and high tensile wire braid> Compatible with all HFC, HCFC and CFC refrigerants including R410A refrigerant> UL approved and CE marked under the Pressure Equipment Directive (PED) 97/23/EC
Code Connection Price (€/unit)
YAV01/4 1/4” 10,56
YAV03/8 3/8” 11,33
YAV01/2 1/2” 12,15
YAV05/8 5/8” 13,31
YAV03/4 3/4” 17,83
YAV07/8 7/8” 18,97
YAV11/8 1 1/8” 24,77
YAV13/8 1 3/8” 35,10
YAV15/8 1 5/8” 45,40
YAV021/8 2 1/8” 67,00
YAV25/8 2 5/8” 130,00
YAV31/8 3 1/8” 207,00
16
EUROREFRIGERANT VIBRATION ABSORBER
Applications: > Full range of sizes from 1/4” to 4-1/8” ODF model> Maximum working pressure : 700 psig (48bar, 49kg/cm2)> Working temperature range : -40°F (-40°C) ~ 300°F (150°C)>Compatible with CFC, HCFC and HFC refrigerants> UL/cUL Listed, CE Certified
Construction: > Bi-directional application> Welded body joint and improved internal parts design to guarantee leak-free performance> 100% Helium tested at maximum design pressure> Robust brass body and cap design with extended copper fittings and optional access fittings
Types (s): > RBV series ball valves with or without access port
CodeWith Access
Port
Connection Size (inch)
Packing quantity
Dimension (mm) Cv(m3/h)
Price(€/unit) L H C
YGSRBV6C 1/4” 40 165 54,4 16 2,1 23,00
YGSRBV10C 3/8” 40 165 54,4 16 4,3 23,20
YGSRBV12C 1/2” 40 165 54,4 16 7,0 25,10
YGSRBV16C 5/8” 40 165 54,4 16 13,9 25,10
YGSRBV18C 3/4” 12 184 66,9 21 21 35,20
YGSRBV22C 7/8” 12 184 66,9 21 30,3 37,15
YGSRBV28C 1 1/8” 12 216 75,7 25,5 61,3 52,00
YGSRBV35C 1 3/8” 6 235 94 31 85,2 86,20
YGSRBV42C 1 5/8” 6 254 109 39 212,4 97,30
YGSRBV54C 2 1/8” 2 290 131,5 47,5 284,7 157,50
YGSRBV64C 2 5/8” 2 327 131,5 47,5 237,5 236,10
YGSRBV76C 3 1/8” 1 365 154 60 324,4 264,00
CodeWithout Access
Port
Connection Size (inch)
Packing quantity
Dimension (mm) Cv(m3/h)
Price(€/unit) L H C
YGSRBV6 1/4” 40 165 54,4 16 2,1 20,96
YGSRBV10 3/8” 40 165 54,4 16 4,3 20,96
YGSRBV12 1/2” 40 165 54,4 16 7,0 22,79
YGSRBV16 5/8” 40 165 54,4 16 13,9 22,79
YGSRBV18 3/4” 12 184 66,9 21 21 32,94
YGSRBV22 7/8” 12 184 66,9 21 30,3 34,78
YGSRBV28 1 1/8” 12 216 75,7 25,5 61,3 49,53
YGSRBV35 1 3/8” 6 235 94 31 85,2 83,62
YGSRBV42 1 5/8” 6 254 109 39 212,4 94,66
YGSRBV54 2 1/8” 2 290 131,5 47,5 284,7 154,55
YGSRBV64 2 5/8” 2 327 131,5 47,5 237,5 232,87
YGSRBV76 3 1/8” 1 365 154 60 324,4 259,61
17
ESSEN REFRIGERANT BALL VALVE
Refrigerant ball valve
With Access Port:
Without Access Port:
Conections and Sizes:
NGI SAFETY VALVE
Code Model Orifice (mm)
Inlet con-nection
NPT
Outlet connec-
tionGAS
Refrigerant
Discharge capacity Setting Pres-sure(Bar)
Kdr CE
Price (€/unit)
kg/h air
20ºC
Refrigerant
T sat ºC 100ºC
YGSD7/CS1/4
D7/CS 7
1/4”
1/2”
R-134a 654 1373 1209 20,5
0,85 23,13R-22 / R-407C 761 1484 1274 24
YGSD7/CS3/8 3/8”R-404A / R-507A / R-442A 868 2048 1600 27,5
R-410A 1440 4387 - 46,2
YGSD10/CS3/8
D10/CS 10
3/8”
3/4”
R-134a 1350 2832 2494 20,5
0,86 26,00R-22 / R-407C 1570 3062 2629 24
YGSD10/CS1/2 1/2”R-404A / R-507A / R-442A 1791 4226 3302 27,5
R-410A 2970 9050 - 46,2
YGSG14/S3/4 G14/S 13,5
1/2”
1”
R-134a 2459 5158 4544 20,5
0,86 76,56R-22 / R-407C 2861 5579 4789 24
3/4”R-404A / R-507A / R-442A 3263 7698 6014 27,5
R-410A 5410 16485 - 46,2
YGSG20/S1 G20/S 20 1” 1”1/4”
R-134a 5211 10931 9630 20,5
0,83 123,75R-22 / R-407C 6063 11822 10149 24
R-404A / R-507A / R-442A 6915 16314 12745 27,5
R-410A 11466 34936 - 46,2
Safety valves for refrigerant gases
Safety valve alternatives to fusible plugs
Nuova General Instruments has specialised in the production of safety valves for the air conditioning and refrigeration sectors for over a decade, using mainly brass bodies and PTFE seals. NGI has a vast experience in gas and pressure control and uses a valid and proven test system which is described in brief below. To guarantee 100% safe sealing in all its refrigeration and air conditioning products, NGI has developed a special valve testing island incorporating a hydrogen system. This island is able to detect even the smallestleakage, at pressures only just below the valve’s calibrated value, and effectively avoids annoying leakage problems during the plant start-up and commissioning stages. The NGI safety valves are approved and comply with the requirements of the European Directive 97/23/EC (PED), ASME VIII Div.1; on requesttesting can be performed by the most prestigious authorities such as TÜV, RINA, Bureau Veritas, ABS and Lloyd’s Register. In 1995 NGI obtainedthe ISO 9002 quality system certification issued by Bureau Veritas Quality International Italia S.R.L, and is currently certified in compliance with theISO 9001:2008 issued by TÜV.
NGI has developed 2 models of compact, low-cost safety valves to provide valid alternatives to conventional fusible plugs. Unlike fusible plugs, our safety valves are operated by pressure and not temperature, and therefore guarantee precision and reliability at calibrated values. Another benefit of our valves is their extremely low gas dispersion, achieved by closing the valve at just below its calibrated pressure.
A complete series of pipe outlet safety valves, hole sizes from 7 to 25 mm, calibrated pressures up to 60 bar, suitable for use with all REFRIGERANT gases including CO2.
Materials: All parts are in brass (UNI EN 12164 CW614N) except the spring which is in spring alloy steel (UNI EN 10270-1).Seal seats: PTFE (-196°C+250°C)
18
Code Model Orifice (mm)
Inlet connection
NPTRefrigerant
Discharge capacity Setting Pres-sure(Bar)
Kdr CE Price (€/unit) kg/h
air 20ºC
Refrigerant
T sat ºC 100ºC
YGSD7/CS1/4
D7/S 7
1/4” R-134a 624 1308 1152 20,5
0,81 14,69R-22 / R-407C 725 1415 1214 24
YGSD7/CS3/8 3/8”R-404A / R-507A / R-442A*1 827 1952 1525 27,5
R-410A 1372 4180 - 46,2
YGSD10/S3/8
D10/S 10
3/8”R-134a 1209 2535 1152 20,5
0,77 21,56R-22 / R-407C 1406 2742 2354 24
YGSD10/S1/2 1/2”R-404A / R-507A / R-442A*2 1604 3784 2956 27,5
R-410A 2659 8103 - 46,2
Material: All parts are in brass (UNI EN 12164 CW614N) except the spring which is in spring alloy steel (UNI EN 10270-I)Seal seats PTFE (-196°C+250°C)
*1 The discharge capacities shown are under the norm 13136:2001.*2 The capacities shown are for R-404A. Values for R-507A & R-442A may be slightly different.
Code Model Orifice (mm)
Inlet connection NPT
Outlet connection
GASCE Homologation Kdr CE Price
(€/unit)
YGSE10/LS1/2E10/LS 10
1/2” 1” 0,3-100 bar 0,86 272,81
YGSE10/LS3/4 3/4”
YGSE10/LS 150 E10/LS150 10 3/4” 1” 1/4” 100-150 bar 0,86 309,13
YGSE14/LS E14/LS 14 3/4” 1” 1/4” 0,3-100 bar 0,86 482,13
YGSE14/LS 150 E14/LS150 14 1” 1” 1/2” 100-150 bar 0,86 591,75
High pressure CO2 safety valvesMaterials: All parts are in brass (UNI EN 12164 CW614N) except the spring which is in spring alloy steel (UNI EN 10270-1). Seal seats: PTFE (-196°C+250°C)
Safety valves specially made to work at high pressures, hole diameters from 10 to 14 mm, maximum calibrated pressure 150 bar, perfect for new CO2 plant.
19
Shown prices are for models with PTFE gasket.
Shown prices are for brass model.
Shown prices are for brass model.
Safety valves for ammonia
Code Model Orifice(mm)
Inlet connection NPT
Outlet connection GAS CE Homologation Kdr CE Price
(€/unit)
YGSD7/CSA1/4D7/CS 7
1/4 1/2” 0,3-60 bar 0,85 226,25
YGSD7/CSA3/8 3/8”
YGSD10/CSA3/8D10/CS 10
3/8”3/4” 0,3-60 bar 0,86 278,75
YGSD10/CSA1/2 1/2”
YGSG14/SA1/2G14/S 13,5
1/2”1” 0,3-60 bar 0,86 445,69
YGSG14/SA3/4 3/4”
YGSG20/SA G20/S 20 1” 1”1/4” 0,3-60 bar 0,83 761,25
YGSG25/SA G25/S 25 1” 1” 1/2” 0,3-60 bar 0,78 926,06
Materials: UNI EN 10088 1.4404 SA479 S31603 Seal seats Metal (-196°C+450°C)PTFE (-196°C+250°C)
Safety valves designed to work in for contact with ammonia, body and internal parts in stainless steel, Teflon or stainless steel seal, made to withstand wear and corrosion for many years.
Changeover valve
Code Inlet connection C
Outlet connection D
Price (€/unit)
YGSVRU01 1/2” NPT 1/2” NPT 102,59
YGSVRU02 3/8” GAS 1”1/4” ROTALOCK 96,31
YGSVRU03 1/2” GAS 1”1/4” ROTALOCK 98,19
YGSVRU04 3/4” GAS 1”3/4” ROTALOCK 126,91
YGSVRU05 1” GAS 1”3/4” ROTALOCK 129,34
Brass / Stainless steel – Teflon (50° / +200° C)
Brass adapters for changeover valves
Code Connection A Connection C Price (€/unit)
YGSR01 3/8” 3/8” 8,28
YGSR02 1/2” 1/2” 9,03
YGSR03 3/4” 3/4” 11,69
YGSR04 1” 1” 19,25
YGSR05 1-1/4” 1/2” 9,75
Code Connection A Connection C Price (€/unit)
YGSR06 1-3/4” 3/4” 21,69
YGSR07 1-3/4” 1” 21,69
Brass - Stainless steel - Teflon (50° / +200° C)
Annealed copper gasket
PTFE Gasket
Ø C
Ø F
A (Rotalock)
C (NPT)
Ch.E
B
D
Ø F
A (NPT)
(Gas ISO 228)
Ch.E
B
D
C
The Quadra system – comprising of thermoplastic flexible capillary hose, fittings in brass and steel and dedicated tooling – gives quick production, in a few simple steps, with superior quality connections to the pressure test points, gauges, the pressure switches including the oil return circuits and oil level equalization, for air conditioning and refri-geration units of each type and size.
More Security:The use of QUADRA fl exible hose eliminates the problems caused by the effect of vibrations that is associated with copper tubing, reducing sound levels and vibration transmission signifycantly and at the same time eliminating the risk of rupture and leak of refri-gerant. More Speed:The possibility of choosing between QUADRA hose already assembled at the factory in standard configurations, or to the customers own design, and the flexibility for the customer to be able to make on the spot their own QUADRA hose assemblies in the preferred configuration using the selection of fittings, components and tools part of the QUADRA system, allow to reduce the time required to make circuits when compared to using rigid copper tubing.
More SimplicityThe complete system of fittings, accessories and tooling, the multi lingual instructions and the great intuitiveness of the QUADRA system make the operation of assembly the connections not only faster but, above all, more simple and consequently more secure. In contrast to the brazing or bending operations that are necessary for rigid copper tubing, installation and connection of QUADRA flexible hose does not need any particular specialization and so making the connecting operation within anyone’s ability.The large fitting range available and the dedicated assembly tooling for the QUADRA hose allows the operator to assemble the ma-chine, or carry out maintenance and to work quickly, flexibly and securely, reducing to a minimum or eliminating completely the need of brazing operations.
Transfer Oil advice the standardization of use of the QUADRA DN2 hose, choosing the orange colour for the high pressure circuits and the black colour for the low pressure circuits, so identifying in an unambiguous way the two parts of the circuit. This reduces the possibilities of misconnections of the two pressure lines of the machine during production and maintenance. Directive 2002/95/EC. The materials used to build the hose and fittings make both the DN2, DN4 and DN6 QUADRA capillary hoses compatible with all refrigerant fluids in the HCFC, HFC families.
Model ID (mm) OD (mm) Connections (Flare)
Maximum Working pressure (Bar)
Minimum Busrt pressure (Bar)
Working Tempera-ture (MinºC/MaxºC Bend radius (mm)
QUADRA DN2 2 5,9 1/4 120 600 -45 / +130 10
QUADRA DN4 4 8,9 1/4 y 3/8 120 600 -45 / +130 25
QUADRA DN6 6 10,9 1/4 y 3/8 120 600 -45 / +130 35
Cover material (black - orange) Thermoplastic polymer
Inner tube material (Thermoplastic polymer)
Reinforcing material (Polyester braid of high tensile strength with high modulus).
QUADRA PLASTIC CAPILLARY HOSE
20
The QUADRA DN2 flexible thermoplastic capillary hose, represent the most efficient and developed system for the connection of pressure gauges, pressure switches and pressure test points. The extraordinary number of QUADRA DN2 fittings covers all possible types of installations, making the need of copper rigid tubes and capillaries unnecessary. The crimping fittings for the QUADRA DN2 hose are available with connections of 1/4” SAE.
1 2 3
4 6
Quadra DN2 & DN4 assembled capillari hoses
In addition to the models mentiones above, hoses of any length, and with any type of connection of DN2, DN4 & DN6 can de delivered.
Code ID (mm) Connections Lenght (mm) Unit price (€/pc)
TFRCAA040 2 1/4” straight x 1/4” straight 400 6,84
TFRCAA060 2 1/4” straight x 1/4” straight 600 8,42
TFRCAA080 2 1/4” straight x 1/4” straight 800 9,38
TFRCAA100 2 1/4” straight x 1/4” straight 1000 10,34
TFRCAC040 2 1/4” straight x 1/4" elbow 400 11,67
TFRCAC060 2 1/4” straight x 1/4" elbow 600 12,63
TFRCAC080 2 1/4” straight x 1/4" elbow 800 13,60
TFRCAC100 2 1/4” straight x 1/4” elbow 1000 14,56
TFRCAF060 4 1/4” straight x 1/4” straight 600 9,34
TFRCAF090 4 1/4” straight x 1/4" straight 900 11,04
TFRCAF120 4 1/4” straight x 1/4” straight 1200 12,73
TFRCAG060 4 1/4” straight x 1/4" elbow 600 14,22
TFRCAG090 4 1/4” straight x 1/4” elbow 900 15,91
TFRCAG120 4 1/4” straight x 1/4" elbow 1200 17,61
5a 5b
Quadra DN2 fittings & hose (50 pcs box & 50 m roll)
TFR0780C TFR0780BC ]Meter price (€/m): 4,58
TFRXBB02C (with depressor)Unit price (€/pc): 2,90
TFRXCA02CUnit price (€/pc): 6,64
TFRWPB0C1Unit price (€/pc): 9,08
TFRWZE2C1 Unit price (€/pc): 9,05
TFRWPA2C1Unit price (€/pc): 16,80
TFRWDN22CUnit price (€/pc): 6,10
21
TFRXPA2C2Unit price (€/pc): 18,59
TFRXBA02CUnit price (€/pc): 2,63
QUADRA PLASTIC CAPILLARY HOSE
Quadra DN2 fittings & hose (50 pcs box & 50 m roll)
TFRXPB0C2Unit price (€/pc): 9,40
TFRXPB2C4Unit price (€/pc): 15,23
TFRXPB2C3Unit price (€/pc): 15,64
TFRXPA2C3Unit price (€/pc): 19,24
TFRXPA2C4Unit price (€/pc): 20,38TFRXPA2C5
Unit price (€/pc): 19,73
The QUADRA DN4 are the ideal solution for equalizing and oil return lines. The QUADRA DN4 hoses have an internal diameter of 4 mm and therefore they can substitute copper rigid tubing of OD 6 mm or 1/4”.The QUADRA DN4 hose can also be used, at the choice of the user, also for connection to the pressure gauges, pressure switches and test points as with QUADRA DN2. The crimping fittings for the QUADRA DN4 hose are available with connections of 1/4” SAE.
Quadra DN4 fittings & hose (50 pcs box & 50 m roll)
TFR0789C TFR0789BC ]Meter price (€/m): 5,31
TFRWPB0M1Unit price (€/pc): 11,90
TFRWZE2M1Unit price (€/pc): 8,59
TFRXBA02MUnit price (€/pc): 2,79
TFRXBA04M (3/8”)Unit price (€/pc): 5,34
TFRXCA02MUnit price (€/pc): 7,37
TFRXCA04M (3/8”)Unit price (€/pc): 9,84
TFRXJA02M (Reusable)Unit price (€/pc): 12,06
TFRXIA02M (Reusable)Unit price (€/pc): 8,02
22
TFRWPD2C1Unit price (€/pc): 11,46
TFRXPB2C7Unit price (€/pc): 14,91
Quadra DN6 fittings & hose (50 pcs box & 50 m roll)
Accessories for quadra hoses
The QUADRA DN6 is characterized by an internal diameter of 6 mm, and therefore they can substitute copper rigid tubing of OD 8 mm or 5/16”.The larger internal diameter reduces the pressure drop and makes the use of this hose possible on larger systems for the oil return lines and for the oil equalization systems.The crimping fittings for the QUADRA DN6 hose are available with connections of 1/4” SAE and 3/8” SAE
TFRWZE2N1Unit price (€/pc) 11,22
TFR0786C TFR0786BCMeter price (€/m): 6,64
TFRXBA02NUnit price (€/pc) 5,26
TFRXBA04N (3/8”)Unit price (€/pc) 7,37
TFRXCA02NUnit price (€/pc) 9,54
TFRXCA04N (3/8”)Unit price (€/pc) 12,63
Hand Pliers QUADRA 2 mm.Code: TFRRXA003Unit price (€/pc): 236,00
Hydraulic pliers QUADRA 4 mm y 6 mm. Code: TFRRXA005Unit price (€/pc): 1771,60
CutterCode: TFRWXA004Unit price (€/pc): 17,83
Blades Code:TFRWXB004Unit price (€/pc): 6,15
Removable valve openerCode: TFRWTD2Z1Unit price (€/pc): 0,65
Copper gasket 1/4” & 3/8”Code: TFRWRP502 (1/4”)Unit price (€/pc) 0,24 Code: TFRWRP504 (3/8”) Unit price (€/pc): 0,36
>10 m. ref. TFR0780C> 10 m. ref. TFR0780BC> 20 ref. TFRXBA02C> 20 ref. TFRXBB02C> 10 ref. TFRXCA02C> 10 ref. TFRWPB0C1> 10 ref. TFRXPB0C2> 50 ref. TFRWRP502> 50 ref. TFRWTD2Z1> 1 ref. TFRRXA003> 1 ref. TFRRXA004> 2 ref. TFRWXB004
Empty QUADRA caseCode: TFRMR043Unit price (€/pc) 99,61
Complete QUADRA caseCode: TFRW00001Unit price (€/pc) 867,53
1/4” & 3/8 fitting plugsCode: TFRWRW912 (1/4”)Unit price (€/pc): 0,11 Code: TFRWRW914 (3/8”) Unit price (€/pc): 0,11
QUADRA CRIMP DN2, DN4 y DN6Code: TFRRXA006Unit price (€/pc): 4311,26
23
TOOLS
Charging hosesSpecifications: > Full flow valve for faster recovery. Low loss fitting.> Standard Charging hose with Minimum burst 3000 psi (206 bar) and Maximum working pressure 600 psi (41 bar). 1/4” (7/16 -20) Female flare on manifold connection and 1/4” (7/16 -20) Female flare angled on service end.> Premium Charging hose with Minimum burst 4000 psi (276 bar) and Maximum working pressure 800 psi (55 bar) for R-410A. R&B 1/4” (7/16 -20) X 5/16” (1/2 – 20) and Y 1/4” (7/16 -20) X 1/4” (7/16 -20).> Uses Teflon gasket and valve opener.> Lengths: 0,15 / 0,90 & 1,5m.> 3/8” Premium Heavy-duty Charging hose with Minimum burst 3000 psi (206 bar) and Maximum working pressure 600 psi (41 bar).
Code Description Price (€/unit)
OXY12236RYB 3 pack, Standard Hose, 36” (0,9m) 17,80
OXY12260RYB 3 pack, Standard Hose, 60” (1,5m) 19,25
OXY12260/SV 3 pack, Standard Hose, 60” (1,5m), w/ball valve 45,00
OXY41060RYB 3 pack, Premium Hose, 60” (1,5m) 28,90
OXY41060/SV 3 pack, Premium Hose, 60” (1,5m), w/ball valve 50,00
OXY-VCH36Y 3/8” Yellow hose, 36” (0,9m) 24,50
OXY-VCH60Y 3/8” Yellow hose, 36” (1,5m) 27,00
OXY-HDSS 1/4” Black hose, 6” (0,15m) w/ball valve 21,08
Code Description Price (€/unit)
WIGG19020 1/4” SAE NBR gasket (10 pcs) 3,60
WIGG19516 5/16” SAE NBR gasket (10 pcs) 6,00
WIGG19030 3/8” SAE NBR gasket (5 pcs) 4,00
OXYLX139 Adjustable Valve opener (10 pcs) 5,35
OXY001HRP 1/4" & 5/16” SAE teflon gasket (6 pcs) with Valve opener (3 pcs)
4,10
OXYRYBREC Replacement handle, screw & label (3 sets/pack) 12,00
YFGAL0190 Straight adapter 1/4" F x 5/16” M w/internal core 2,70
YFGAL0191 Straight adapter 1/4" F w/Depressor core x 5/16” M w/internal core
2,70
YFGAL0192 Straight adapter 5/16" F w/Depressor core x 1/4” M w/internal core
2,70
Hose replacement parts and adapter fittings
Automotive a/c couplersCouplers interface with R-134ª service ports. 14mm Female thread or 1/4” Male flare available.
Code Description Price (€/unit)
OXY-1305-H Hi-side x 1/4” Male fl. R-134a coupler 23,00
OXY-1305-L Lo-side x 1/4” Male fl. R-134a coupler 23,00
RIT40323 Hi-side x 1/4” Male fl. R-134a coupler 62,00
RIT40324 Lo-side x 1/4” Male fl. R-134a couple 62,00
RIT41301 Hi-side x 14mm R-134a coupler 62,00
RIT41302 Lo-side x 14mm R-134a coupler 62,00
24
2-way with pressure gauge
Code Description Gauge boots Included Valve Diameter Class Price (€/unit)
OXY13000 2-way without pressure gauge 36,00
OXY13601 2-way with pressure gauge for R22, R134a, R404A & R407C X Piston 70 1.6 39,45
OXY13601-410 2-way with pressure gauge for R22, R407C & R410A X Piston 70 1.6 40,70
OXY13602 2-way with pressure gauge for R417A, R422D & R422A Piston 80 1.0 93,20
OXY13601RS 2-way with pressure gauge for R424A, R426A, R434A & R428A X Piston 70 1.6 51,00
OXY13600 2-way with pressure gauge for R600A X Ball 63 1.0 92,00
OXYLXB13601 2-way with pressure gauge for R22, R134a, R404A & R407C X Ball 80 1.0 47,00
OXYLXB13601-410 2-way with pressure gauge for R22, R407C & R410A X Ball 80 1.0 51,00
2-ways manifold kit in carrying case with flexible hoses
OXYKIT 2-way with pressure gauge for R22, R134a, R404A & R407C X Piston 70 1.6 72,00
OXYKIT410 2-way with pressure gauge for R22, R407C & R410A X Piston 70 1.6 83,00
Gauge boots included
sightglass
High shock resistance
Aluminium body
17
Series of aluminium testing manifolds
1-way with pressure gauge Ø70 Class 1.6 Piston valve.
Code Description Price (€/unit)
OXY-467-ALA 1-way without pressure gauge (high side) 15,00
OXY-467-ALB 1-way without pressure gauge (Low side) 15,00
OXY-467-ALA13601 1-way with pressure gauge for R22, R134a, R404A & R407C (high side) 22,00
OXY-467-ALB13601 1-way with pressure gauge for R22, R134a, R404A & R407C (Low side) 22,00
OXY-467-ALA410 1-way with pressure gauge for R22, R407C & R410A (high side) 22,00
OXY-467-ALB410 1-way with pressure gauge for R22, R407C & R410A (Low side) 22,00
OXY-467-ALARS 1-way with pressure gauge for R424A, R426A, R434A & R428A (high side) 26,00
OXY-467-ALBRS 1-way with pressure gauge for R424A, R426A, R434A & R428A (Low side) 26,00
25
TOOLS
26
Forged aluminum alloy body makes this unit lightweight for handling ease with the durability and reliability required for repeated use.
> Front access for easy field recalibration> Double “O” ring piston for reliability and long service life> Exclusive 100 mesh filter in-line on all flare fittings helps keep out particulate material and ex- tend the life of the seats> Contoured easy-grip handles for positive control; color-coded for ready identification> Sight glass to easily view refrigerant movement and condition during charging and recovery> Heavy duty hook won’t pull out> Manifold and hose holder fittings all 1/4” unless otherwise identified> Made in the USA
Code Description Price (€/unit)
RIT49803 2-way with pressure gauge for R22, R134a & R407C 185,00
RIT49856 2-way with pressure gauge for R134a, R404A & R407C 185,00
RIT49869 2-way with pressure gauge for R410A 185,00
2-way TITAN Yellow Jacket with pressure gauge Ø80 Class 1.0 Piston valve
2-ways with oil-filled pressure gauges Ø80
Code Description Price (€/unit)
OXY13601GLIC 2-way with pressure gauge for R22, R134a, R404A & R407C 60,00
OXY13601-410GLIC 2-way with pressure gauge for R22, R407C & R410A 67,00
OXY13604GLIC 2-way with pressure gauge for R410A* 162,00
4-ways manifold kit in carrying case with flexible hoses
* *No zero adjustment required. Class 1. 90mm.
Code Description Price (€/unit)
OXY83601 4-way with pressure gauge for R22, R134a, R404A & R407C 100,00
OXY83601-410 4-way with pressure gauge for R22, R407C & R410A 104,00
Code Description Price (€/unit)
OXY50022G High side pressure gauge for R22, R134a, R404A & R407C 9,00
OXY25022G Low side pressure gauge for R22, R134a, R404A & R407C 9,00
OXY500410G High side pressure gauge for R22, R407C & R410A 9,00
OXY250410G Low side pressure gauge for R22, R407C & R410A 9,00
OXY500RSG High side pressure gauge for R424A, R426A, R434A & R428A 13,00
OXY250RSG Low side pressure gauge for R424A, R426A, R434A & R428A 13,00
Ø70 Pressure gauges
Ø80 Pressure gauges, Class 1 “Pulse Free”
Code Description Unit price (€/pc)
OXY25022G80 High side pressure gauge for R22, R134a, R404A & R407C 14,00
OXY50022G80 Low side pressure gauge for R22, R134a, R404A & R407C 14,00
OXY250410G80 High side pressure gauge for R22, R407C & R410A 14,00
OXY50410G80 Low side pressure gauge for R22, R407C & R410A 14,00
RIT49113 High side pressure gauge for R417A, R422D & R422A 33,00
RIT49114 Low side pressure gauge for R417A, R422D & R422A 33,00
27
Pressure gauges Ø80, oil-filled
Code Description Price (€/unit)
OXY500GLIC High side pressure gauge for R22, R134a, R404A & R407C 16,00
OXY250GLIC Low side pressure gauge for R22, R134a, R404A & R407C 16,00
OXY50410GLIC High side pressure gauge for R22, R407C & R410A 25,00
OXY25410GLIC Low side pressure gauge for R22, R407C & R410A 25,00
RIT49519 High side pressure gauge for R410A 67,00
RIT49520 Low side pressure gauge for R410A 67,00
Other spare parts are also available.
Code Description Price (€/unit)
OXY002 Carry case for Think manifolds 17,00
RIT41111 Carry case for TITAN manifolds 56,00
OXY25PROTECRED Red protective gauge boots for Think manifolds 5,00
OXY25PROTECBLUE Blue protective gauge boots for Think manifolds 5,00
RIT49190 Red & Blue protective gauge boots for TITAN manifolds 26,00
OXY140A HIGH knob kit 14,00
OXY140B LOW knob kit 14,00
Spare parts and accessories
Electronic Refrigerant Charging Scales CE RCS series refrigerant charging scales are used for refrigerant charging, recovery & weighting of commercial A/C, auto A/C, refrigeration systems.
Specifications LX36575A 110 lbs. (50 kg) scale:> Resolution: 2 g / 0.005 lb. / 2 OZ> Display: LCD display with Lamp function.> Accuracy: ± 0.5% reading> Unit: Kg/Pounds> Power: 2x9V battery> Battery life: aprox 60 hours.> Platform size: 230 x 230mm (9.06” x 9.06”)> Weight: 3.3 kg (7.28 lbs.)> Auto off: 15 min> IP66 protection from moisture> Scale overload indicator> Carry case
Specifications RCS-7040 220 lbs. (100 kg) scale:> Resolution: 5 g / 0.01 lb. / 0.18 OZ> Display: LCD display with Lamp function.> Accuracy: ± 0.5% reading> Unit: Kg/Lb/OZ> Power: 9V battery> Battery life: aprox 30 hours.> Platform size: 223 x 223mm (8.78” x 8.78”)> Weight: 2.485 kg (5.48 lbs.)> Scale overload indicator> Carry case
Specifications RCS-9030 220 lbs. (100 kg) scale:> Resolution: 5 g / 0.01 lb. / 0.18 OZ> Display: LCD display with Lamp function.> Accuracy: ± 0.5% reading> Unit: Kg/Lb/OZ> Power: 5x1.5V alkaline battery (7.5VDC)> Battery life: aprox 60 hours.> Platform size: 223 x 223mm (8.78” x 8.78”)> Weight: 2.485 kg (5.48 lbs.)> Programmable> Scale overload indicator> Carry case
Code Description Price (€/unit)
OXY-36565-50 LX36575A 50 kg scale 160,00
OXY-36565-100 RCS-7040 100 kg scale 167,00
OXY-36565-100P RCS-9030 100 kg sclae 270,00
TOOLS
28
VRR Series Refrigerant Recovery units. Lighter · Faster. CE
Recovery cylinders
> One key operation, easy to use> Extremely light > Twin-piston, oil-less compressor, faster recovery.> Able to work with all CFC, HCFC and HFC refrigerants.> Created to work especially with R410A.> Self-evacuation system which allows to change the type of refrigerant easily.> Automatic stop of the unit when there is no refrigerant available in the system Visual signal (green LED) when recovery is completed.> Automatic safety shut-off of the unit in case of high pressure (38,5 bar/3850kPa/558 psi) with visual alarm (red LED).> Equipped with a filter drier.> Equipped with a high capacity ventilation system.> Extremely silent.
Specifications: VRR12L> Dimensions: 400 x 250 x 355 mm.> Push/pull: up to 373 kg/h.> Vapor: up to 15,60 kg/h.> Liquid: up to 132 kg/h.> Weight: 13,5 kg.> Power Supply: 220-240 VAC 50-60 Hz> Motor speed: 1450 rpm@50Hz 1750 rpm@60Hz> Compressor: 3/4 hp> Operating Temperature: 0ºC – 40ºC
Specifications: VRR24L> Dimensions: 400 x 250 x 355 mm.> Push/pull: up to 597 kg/h.> Vapor: up to 31,20 kg/h.> Liquid: up to 202 kg/h.> Weight: 14,8 kg.> Power Supply: 220-240 VAC 50-60 Hz> Motor speed: 1450 rpm@50Hz 1750 rpm@60Hz> Compressor: 1 hp> Operating Temperature: 0ºC – 40ºC
Code Capacity (l) PH Weight (kg) Valve connection Price (€/unit)
ENV15Y 14,5 42 8,5 1/4” Flare 93,35
ENV25Y 27.2 42 14,3 M21,7 137,78
ENV61,1LY 61 42 27.9 M21,7 267,20
Code Description Price (€/unit)
GRTRECVRR12L Equipo de recuperación VRR12L 800,00
GRTRECVRR24L Equipo de recuperación VRR24L 1067,00
Made in Portugal by Amtrol-Alfa Manufacturer
iPump Vacuum Pump SeriesHigh Ultimate Vacuum. Dual Stage. 15 micron. CE
Model iPump Series
CodeFlow rate 50/60Hz
(l/min) Power
50/60 Hz(w)
Ultimate Vacuum (micron)
Connections Dimensions Weight (kg)
Oil Capacity (ml)
Price (€/unit)
(l/min) CFM
GRTVI220SV 51/57 1.8/2.0 246 12 1/4” / 5/16” 318x124x234 8,6 200 300,00
GRTVI240SV 100/113 3.5/4.0 372 12 1/4” / 5/16” 337x138x244 15,9 325 369,00
GRTVI280SV 198/226 7.0/8.0 745 12 1/4” / 5/16” 395x145x257 16,3 500 540,00
Vacuum Pump oilCode Capacity (l) Price (€/unit)
EIT1008Q 0,25 6,80
RIT93092/1 1 12,75
29
Vacuum GaugeVA-116 DIGITAL VACUUM GAUGE with eight units of vacuum for confidenceThis easy—to—use gauge helps you to be certain that air and moisture have been removed from the sys-tem. Simple push of a button chanqes the display readout between 8 units of vacuum. Each displays down to the equivalent 0f 10 microns of vacuum to let you know that your vacuum pump is clean and performing properly.If the sensor gets dirty simply pull a new sensor out of your tool kit, plug it into the gauge,run through a quick calibration process, and be back on the iob within minutes Specifications: > Unique patented thermal conductivity sensor automatically compensates for temperature> Replaceable, cleanable, plug-in sensor handles 450 psi positive pressure> Displays 8 different units of vacuum (microns Torr, Bar, Psi, kPa, Kg, cm2, mmHg, inHg)> 12” coiled sensor cord stretches to 24” for easy reach, connectivity, and readability of display> Operating Temperature Range, 32ºF to 122ºF (0ºC to 50ºC)> Low battery indicator> Automatic shut—off after 15 minutes> Weight, 12 oz (340g) with battery
Code Ref. Description Price (€/unit)
OXYVAC 1 Mechanical v. gauge 24,00
OXYVA116 2 VA-116 v. gauge 180,00
1
2
High accuracy vacumm gauge shows system pressure.
Innovative solenoid valve design of 100% preventing oil-returning, especially suitabel for R410A new refrigerant.
Integrated pump body structure, 15 micron of ultimate vacuum.
Big sight glass, low oil level and forced-feed oil design to avoid running without oil and ensure reliable use.
TOOLS
30
Code Description Price (€/unit)
GRT69354 AccuProbeTM II LEAK DETECTOR 420,00
GRT69337 AccuProbeTM UV LEAK DETECTOR 766,67
RIT69383 Kit – sensor, filters and bottle 80,00
AccuProbeTM UV LEAK Detector
AccuProbeTM II LEAK Detector
The ultra-sensitive sensor of the YELLOW JACKET AccuProbe UV Handheld Leak Detector allows it to detect even the most diffi-cult to detect R-134a, R-404A, R-407C, R-410A and 1234yf refrigerants. Our exclusive solid electrolyte sensor technology reduces heat and gives the sensor longer life than traditional heated anode or heated diode detectors.
The AccuProbe UV features low, normal and high sensitivity levels with visual and audible signals, and a 3 LED UV light system that works with 395-415nm wavelength leak tracing dyes. The audible alert, which can also be muted, and the flashing visual alarm indicator at the probe end increase in frequency and duration as concentration increases.
The AccuProbe UV is equipped with the advanced digital SmartAlarm LED display. This feature takes the guesswork out of whether or not to repair a small leak. Unlike the more traditional LED bar graphs that copy or mimic the audio alarm signal, the SmartAlarm digital leak size indicator measures, registers and displays the leak size independently from both the audio alarm and sensitivity level on a scale of one to nine:
> 1 to 3 – less than 0.1 oz./yr (2,83 g/yr).> 4 to 6 – 0.1 to 0.5 oz./yr (2,83 to 14 g/yr).> 7 to 9 – more than 0.5 oz./yr (More than 14 g/yr).
Other features include:> Improved, robust, ergonomic design is easy to use in close areas and extendable into hard-to-reach areas
Response time: instantaneous.> Clears in 12 seconds or less after exposure to a 1.75 oz (50 g)/year leak> Automatic calibration and reset to environment.> Low battery indicator.> Microcontroller technology> SAE J2791 Certified, CE Marked, EN 14624> 24-month limited warranty> Made in the USA
Specifications: > Sensitivity: HFC (R-134a) 1.7g (0.06 oz.)/yr. HCFC (R-22) 0.9g (0.03 oz.)/yr. HFO (1234yf) 4.3g (0.15 oz.)/yr.> Sensor lifetime: Over 300 hours service life with minimal cleaning and no adjustments.> Maintenance required: None> Probe lenght: 43 cm (17”).> Weight: 480 g (17 oz.)> Warm up time: 20 sec or less.> Calibration: Automatic.> Response time: Instantaneous.> Batteries: 4 X 1.5V‘ AA’> Battery Life : 4.5 hours> Operating temperature: -4 to 52 ºC (-4 to 125 ºF)> Humidity: 0 to 95% RH non-condensing.
Low, normal and high sensitivity levels with audible signals to quickly and easily pinpoint leaks. AccuProbeTM II has the same specifications as AccuProbeTM UV LEAK DETECTOR except of: > UV lamp.> Flashing visual alarm indicator> SmartAlarm LED display
31
Combustible Gas Detector
H2 Detector
Unit is preset at normal sensitivity, but you can switch to high or low. Slow beeping indicates that unit is warmed up. Frequency increases when a leak is detected until an alarm sounds when moving into high gas concentration. The SmartAlarm LED indicates leak size. With ultra-sensitive, long life sensor. Detects all hydrocarbon and other combustible gases including propane, methane, butane, industrial solvents and more.
Features:> Ultra-sensitive sensor detects less than 15 ppm methane and better than 12 ppm for propane. Performs equally well on a com- plete list of detectable gases including acetylene, butane, and isobutane> Automatic calibration and zeroing> Sensor replacable after full service life> SmartAlarm LED shows how big or small a leak is on a scale of 1 to 9> 24 month warranty (1 year sensor)> Compliancy: CE> Made in the USA Specifications:> Sensitivity: Very high sensitivity detects less than 15ppm methane.> Warm up time: <25 seconds> Sensor lifetime: 500 hours> Response time: Instantaneous.> Probe lenght: 43 cm (17”).> Weight: 450 g (16 oz.)> Batteries: 4 X 1.5V‘ AA’> Battery Life : 20ours> Operating temperature: 0º to 43 ºC (32 to 110 ºF)
Code Description Price (€/unit)
GRT69373 Combustible Gas Detector 500,00
RIT69371 Sensor 34,00
Use in conjunction with tracer gas mixture (95% nitrogen and 5% hydrogen) to detect leak rates less than 5 ppm. It is very useful before starting an installation, when checking for leaks with Tracer Gas mixture.Approvals: EN35422 and EN14624. The Tracer Gas mixture complies with Article 6, Paragraph 3 of EU Directive 2006/40/EC.
Features & Specifications:> True mechanical pump> 3 adjustable sensitivity levels> Automatic calibration and reset to ambient> Low battery indicator> Sensitivity: <5 ppm> Warm up time: <20 seconds> Sensor lifetime: >300 hours> Response time: Instantaneous.> Probe lenght: 43 cm (17”).> Weight: 680 g (24 oz.)> Batteries: 4 X 1.5V‘ AA’> Battery Life : 6 hours> 18 month warranty (1 year sensor)> Compliancy: CE and ROHS> Made in USA
Code Description Price (€/unit)
GRT69341 H2 Detector 556,00
RIT69342 Leak detector 95,00
Refrigerant electronic leak detector DSA-200The DSA-200 Refrigerant Gas Leak Detector is most technologically advanced of its kind. The DSA-200 low power requirements, small size and its sensivity combine to create a tool which is easy to handle and ultra effective at locating even the most difficulty-to-find leaks. Fully SAE J1627 compliant, the DSA-200 will detect leaks as small as 0.1 oz/yr (3g/year) in R12, R22, R134a and other halogen refrigerants. DSA-200 has added useful features to enhance the usability. 1-5 levels range for real-time sensitivity cycle adjustment. 6 pieces of LED displays the leak degree in large range in the form of “gradually lights the light” and also indicates the sensivity level. Tactile keypads make the operation more convenient.
Specifications: > Dimensions : 17 cm x 6 cm x 3,8 cm> Batteries : 2 X 1.5V‘ AA’ (3 VDC)> Battery Life : 40 hours> Sensitivity : <3g/year (0.1 os/yr)> Sensor lifetime: approx. 30 hours.> Operating temperature: 0-50 ºC (32-122 ºF)> Warm up time: <2 sec.> Response time: instantaneous.> Reset time: instantaneous.> Probe lenght: 30 cm (12”).
Code Description Price (€/unit)
GRTDSA-200 Detector de fugas DSA-200 170,00
TOOLS
32
Ball valves – patented 1/4 turns on/off mechanismIdeal using at Vacuum, Charging, Recycling, Flushing operations, no angles to cause restrictions and pressure drops, provide full-flow capacity
1/2”-16ACME M Swivel Flare Nut
Code Description Price (€/unit)
WIG121RGA-4 Ball-valve, 1/2”-16ACME F x 1/4”FLM 15,00
WIG121RGA Ball-valve, 1/2”-16ACME F x 1/2”-16ACME M 15,00
Male Flare to Male Flare
Code Description Price (€/unit)
OXY33011 Ball-valve, 1/4”FL - M x M 14,00
OXY33013 Ball-valve, 5/16”FL - M x M 14,00
OXY33017 Ball-valve, 3/8”FL - M x M 14,00
1/4” SAE Swivel Flare Nut
Code Description Price (€/unit)
OXY33014 Ball-valve, 1/4”FL-F x 5/16”FLM 14,00
OXY33021 Ball-valve, 1/4”FL-F x 1/4”FLM 14,00
OXY33038 Ball-valve, 1/4”FL-F x 3/8”FLM 14,00
3/8” SAE Swivel Flare Nut
Code Description Price (€/unit)
OXY33029 Ball-valve, 3/8”FL-F x 1/4”FLM 14,00
OXY33027 Ball-valve, 3/8”FL-F x 3/8”FLM 14,00
Freon cylinder adapterCode Description Price (€/unit)
MVAUTY000112 1/4” SAE - Adapter for freon cylinders 3,00
MVAUTY000113 3/8” SAE - Adapter for freon cylinders 3,50
MVAUTY000114 5/16” SAE - Adapter for freon cylinders 3,00
Liquid chargerLiquid charging is recommended when charging blends into refrigeration and air con-ditioning systems, and a liquid charger adapter is necessary for safe and fast liquid charging through the low pressure side of a system.> The adapter connects to the cylinder valve or refrigerant can.> To protect the compressor, adapter orifice reduces liquid flow to a level below com pressor capacity.> Eliminates the time and work of heating cylinders.
Code Description Price (€/unit)
RIT41123 1/4” liquid charger 10,20
Thermometers
With wide measurement of -40 to 932ºF (-40 to 500ºC), this easy-to-use tool is the effective choice for high or low temperature refrigeration applications. For accuracy and resolution, the focal point is a tiqht 10:1 ratio with laser siqht.> Selectable 3-point emissivity for simple set-up > Distance: Spot Ratio 10:1> Backlight for dark area use> Switchable temperature units: ºF/ºC> Accuracy: ±2% or 2ºC> 0.1 ºF resolution at -40º to 212ºF (-40 to 100ºC)> Response time: 500 ms> Laser sight: Yes> Battery: 9 Volt x 1
> Accuracy: ± 1ºC (± 1ºF) between -20 to 120ºC (-4 to 248ºF).> Resolution: 0.1ºC between -19.9 to 199.9º> Response time: 1 second> Measuring range: -50 to 150ºC> Battery: 1,5 Volt x 1> Battery life: 5000 hours> Ambient temperature: -10 to 50ºC (-14 to 122ºF)> Automatic power off after 10 min.
Code Description Price (€/unit)
OXY36566 Infrared thermometer 100,00
Code Description Price (€/unit)
OXYSA880SSX Digital thermometer 34,45
Pistol-grip infrared thermometer
Poket digital Thermometer
Code Description Price (€/unit)
OXY36569 Pocket digital thermometer 14,00
Digital Thermometer> Measuring range: -50° ÷ +256°C> Probe: 96 mm stainless steel> Resolution: 0,1÷0,5°C> Switchable temperature units ºF/ºC: 1 sec> Measuring time 1 o/or 10 sec> Alarm: High or low temperature programmable> Wall mounting: ± 1ºC> Battery: 1,5 Volt x 1> Dimensions: 107 x 59 x 20 mm> Weight: 100g
33
Code Description Price (€/unit)
RIT19101 1/4” FLF QC x 1/4” FLM 14,00
RIT19201 1/4” FLF QC 90º x 1/4” FLM 14,00
Code Description Price (€/unit)
RIT19191 1/4” FLF QC 90º x 1/4” FLM 14,00
RIT19201 FLF QC x 1/4” FLM 14,00
RIT19173 FLF QC 45º x 1/4” FLM 14,00
Quick swivel coupler
> Full size with deep knurling for easy handling> CH14 “Adjust-a-Valve” opener in all 1/4” Female ends> Made in the USA
> All couplers have Schrader valve cores in Male flare end.> Female coupler end has deep knurling for easy handling> Patented CH14 “Adjust-a-Valve” opener in all 1/4” Female ends> Made in the USA
Quick Couplers Expanded line
Quick Couplers Schrder core in male end
TOOLS
Code Description Price (€/unit)
OXY30035 1/4”FLF QC x 1/4”FLM 9,00
OXY30045 5/16”FLF QC x 5/16”FLM 9,35
OXY30033 1/4”FLF QC 90º x 1/4”FLM 9,80
OXY30034 5/16”FLF QC 90º x 5/16”FLM 10,15
Automatically and immediately trap refrigerant in the hose when disconnected, helping meet non-venting regulations and preventing finger burns. One-piece attaches quickly, saving up to 50% in time compared to 2-piece quick couplers.
Automatic Shut-off fittings
Standard valve core remover/installer1/4” & 5/16” SAE Valve Core Remover/Installer contents: It becomes 5/16” SAE connection for R410A with an 1/4” FL-M x 5/16” FL-F adapter.
Code Description Price (€/unit)
OXY41550 1/4” & 5/6” valve core remover/installer 43,00
Imperial quick couplers
Code Description Price (€/unit)
OXY16-C 1/4”FLF x 1/4”FLM 24,85
OXY17-C 1/4”FLF 90º x 1/4”FLM 29,45
OXY26-C 5/16”FLF M x 5/16”FLM 25,45
OXY27-C 5/16”FLF 90º x 5/16”FLM 29,75
> Allow to open or close automatically the system without loss of refrigerant.> Eliminate hazardous discharge of refrigerant and oil from system when disconnecting hose.> Prevent finger burn when disconnecting.
2 Oz (60 ml) capacity aluminum body with “O”” ring seal. Built-in sight glass to easy monitor ca-pacity & flow oil or leak-detection dye.Useful for adding oil or dye to system.
Code Description Price (€/unit)
RIT69562 Inyector de aluminio de 1/4” SAE 57,50
60 ml dye & oil injector
34
Ratchet wrenchCode Model Description Price (€/unit)
OXY-H122 Think Ratchet wrench 3/16” & 1/4”, 5/16” & 3/8” 7,50
OXY-127C Imperial Ratchet wrench 3/16” & 1/4”, 5/16” & 3/8” 16,00
Flaring toolsCode Ref. Model Description Price (€/unit)
OXY525AM 1 Think Universal 45º flaring/burnish tool. 3/16” to 5/8” 23,00
OXY808A410 2 Think Eccentric cone type flaring tool. 1/4” to 3/4”. With OXY274 and OXY-208 95,00
OXY806A 4 DSZHEccentric cone type flaring tool with ratchtet. 1/4” to 3/4”. With OXY274 and
OXY-20885,00
OXY-193S 5 Think Swaging punches 1/4”-5/16”-3/8”-1/2”-5/8” 10,00
OXY-95S 6 Think Swaging punch 5-in-1 Punch 1/4”-5/16”-3/8”-1/2”-5/8” 5,50
OXY275AL 7 Think Flaring & swaging tool 1/8”-3/16”- 1/4”-5/16”-3/8”-7/16”-1/2”-5/8”-3/4” 36,67
OXY278AL 8 ThinkFlaring & swaging tool 1/8”-3/16”- 1/4”-5/16”-3/8”-7/16”-1/2”-5/8”-3/4”
With OXY274 & OXYH-12251,12
1
2
3
45
6
8 7
Tube BendersCode Ref. Model Size Price (€/unit)
OXY-369A 1 Think 1/4”-5/16”-3/8” 15,00
OXY-370FH 2 Imperial 1/4”-3/8”-1/2” 81,20
OXY-364-08 3 Think 1/2” 35,00
OXY-364-10 3 Think 5/8” 53,00
OXY-364-12 3 Think 3/4” 64,00
OXYCT999RF 4 DSZH 3/8”-1/2”-5/8”-3/4” & 7/8” 200,00
1 2 3
4
34
Spring tube benders
Code Description Price (€/unit)
OXY102F04 1/4” 1,50
OXY102F06 3/8” 1,83
OXY102F08 1/2” 1,92
OXY102F10 5/8” 2,00
OXY102F12 3/4” 2,56
OXY102F13 3/8”- 1/2”-5/8” 5,74
For 1/4” to 3/4” O.D. tubing> Tools allow hand bending of soft tubing to shape without collapsing walls.> Special spring steel, zinc finish.> End belled for quick tube removal.
TOOLS
35
Standard expander handle
Code Model Measures Price (€/unit)
OXY1000ATL Think3/8”, 1/2”, 5/8”, 3/4”, 7/8”, 1”
1 1/8”, 1 3/8”, 1 5/8”390,00
Standard expander heads
Measures 3/8” 1/2” 5/8” 3/4” 7/8” 1” 1 1/8” 1 3/8” 1 5/8”
Unit price (€/pc) 50 68 68 68 68 68 75 76 95
Tube cutters
Code Type Description Cutting blades Price (€/unit)
OXYTC1050 Imperial 1/8” – 5/8” 32633 19,00
OXYTC1000 Imperial 1/8” – 1 1/8” 75015 32,10
OXY274 Think 1/8” – 1 1/8” OXY-CTB-001 11,00
OXY208FB Imperial 3/8” – 2 5/8” 74761 88,50
OXY312 Think 1/4” – 1 5/8” OXY-CTB-001 14,00
OXY-CTB-001 Imperial Cuchillas - 2,85
Enclosed hardened steel, thrust bearing feed mechanism for smoothest cutting and trouble free operation. Unique design eliminates spiralling for clean right angle cuts. High precision machining and construction method permits one – piece screw type axle for easy access to cutting wheel – no dip to lose or replace.
For expanding, reducing and re-rounding pipes of mild and semi-hard copper, aluminium and precision steel.
> Hardened segments> 6 rivets and guide channels> Bevel at segment ends> Extra long segment> Smooth-running screw thread.> Standard riveted expander heads fit similar expanders from other brands as well.
Standard expander heads
Standard expander handle
Other ToolsCode Ref. Model Description Price (€/unit)
OXY-207 1 Think Handy deburrer cutter 4,45
OXY-352 2 Think Fin straightener 8,00
OXY-128 3 Think Capillary tube cutter 8,00
OXY-351 4 ThinkFin straightener for 8”-9”-10”-12”-
14”-15”7,00
OXY-201 5 Think 7” Pinch-off plier 17,80
OXY-208 6 ThinkInner-outer reamer plastic body
3/16”~1-1/2”4,50
OXY-CT209 7 DSZHInner-outer reamer zinc body 1/4”
to 1-5/8””7,50
54
321
6
7
36
Code Description Price (€/kg)
FSR276325 Gasnett-23 in 25 kg drum 33,35
FSR274915P Pressurised Gasnett-23 in 15 kg cylinder 33,35
Gasnett-23 is a blend developed for the cleaning of the refrigeration equipment. Its main advantages are:
Is an easy and fast solution to flush big Air-Conditioning and refrigeration Systems.
> Low vaporization temperature> Quick evaporation.> Great humidity drag capacity.> Low surface tension.> Non flammable.> ODP = 0> High stability.> No toxic.> Boiling point: 23 ºC (73.4 ºF)
Packaging:> 25 kg drum> 15 kg pressurized cylinder
EASY-FLUSH
Code Price (€/unit)
WIGFLUSH1 1700,00
GASNETT-23 FLUSHING FLUID
The low surface tension of Gasnett-23 makes that can easily penetrate in pores and cracks of the material, so can retire the humidi-ty and residue. On the other hand, its low boiling point (23ºC / 73.4ºF) and high volatibility make easier its elimination at the end of the cleaning operation by vacuum or nitrogen drag. It offers all of the benefits of the CFCs without the environmental concerns. They are powerful cleaners and are the best prescrip-tion to effectively scrub the inside of the refrigeration system. Dries quickly, has a low boiling point, has a low odor, will not attack components and is affordably priced. Gasnett-23 product is the industry’s best answer for major system overhauls.
> Power Supply: 230/240 V – 50/60 Hz> 20 l Internal Storage Tank> Pump Capacity: 14 l/min> Pump Maximum power: 0.75 kw.> Pump maximum pressure: 0.45 MPa> Mechanical sealing pump with EPDM gaskets> Mechanical inlet filter> Connection for external nitrogen pump> Side compartment for “one-shot” nitrogen cartridge> External taps to invert the flush cycle without disconnecting the hoses> 3m flexible joses with 1/4” SAE ball valve> Adapters kit for connecting to A/C systems> Interchangeable SAE connections: 1/4” - 3/8” – 1/2” (2 pcs each type)> Weight: 20 kg> Incorporated cart> Dimensions: 445x300x740 mm
Gasnett-23 flushing fluid
37
EE 1750M
This float type pump is used in conjunction with air conditioners which have condensate collect ion tanks with an outlet on the drainage pipework: Cassette, ceiling unit, split, fan convectors.
Description:The EE1750M comprises a pump unit and a 3-level float switch sensor. The float switch controls On, Off and Alarm conditions.The float switch unit is fixed to the tank outlet or to a pipe end, it is connected to the pump unit by a 1.5 m/5 ft long pipe and cable (an optional extension is available).
Technical Data:> Pump unit (L x W x H): 100 x 81.5 x 67 mm> Electrical spec.: 230 V, 50/60 Hz, 40 VA> Sensor unit (L x W x H): 82 x 39 x 39 mm> Max. flow rate: 32 l/h> Max. delivery height: 15 m> Max. suction height: 3 m> Alarm switch: max. 230 V, 8 A (ohmic load)> NO / NC (normally open / normally closed)> Alarm: max. 23 mm> Code: BCEEE1750> Price: 183,00€
0
10
05 10 15
40
30
20
EE 1750M
EE 1650M
25
20
40
35
30
CAU
DAL
(l/h
)
Niv
el s
onor
o (d
b)
ALTURA (m)
For air conditioners up to 30 kW. Pump swiss drive inside.
Made in Germany
EE 600This float type pump is mainly used in air conditioners with a little spare space inside, e.g. wall mounted mini split and ceiling units. The small sensor can easily be adopted to the air conditioner´s condensate drain hose.
Description:The EE600 system consists of a pump unit and a separate 2-level float switch sensor. It comes with mounting acces-sories like pads of double-sided Scotch Tape to fix the floater and an anti-shock mount for the pump unit.
Technical Data: > Pump unit (L x W x H): 77 x 32 x 50 mm> Electrical spec.: 230 V, 50/60 Hz, 18 VA> Sensor unit (L x W x H): 82 x 39 x 39 mm> Max. flow rate: 6 l/h> Max. delivery height: 6 m> Max. suction height: 1.5 m> Insensitive to contamination due to unique valve design> Code: BCEEE0600> Price: 76,00€
For air conditioners up to 7.5 kW. Pump swiss drive inside
EE 1000This float type pump is mainly used in air conditioners with a little spare space inside, e.g. wall mounted mini split and ceiling units.The small sensor can easily be adopted to the air conditioner´s condensate drain hose.
Description:The EE1000 system consists of a pump unit and a separate 3-level float switch sensor. Beside the on/off function the system offers a high level, potential free NO / NC alarm switch (230 V, 8 A ohmic load). The system comes with mounting accessories like pads of double-sided Scotch Tape to fix the floater and an anti-shock mount for the pump unit.
Technical Data:> Pump unit (L x W x H): 77 x 35 x 62 mm> Electrical spec.: 230 V, 50/60 Hz, 18 VA> Sensor unit (L x W x H): 82 x 39 x 39 mm> Max. flow rate: 10 l/h> Max. delivery height: 10 m> Max. suction height: 2.5 m> Alarm switch: max. 230 V, 8 A (ohmic load)> NO/ NC (normally open/ normally closed)> Insensitive to contamination due to unique valve design> Alarm: max. 23 mm> Code: BCEEE1000> Price: 88,00€
For air conditioners up to 10 kW. Pump swiss drive inside
0 1
12
10
8
6
4
2
02 3 4 5 6 7 8
40
35
30
25
20
CAU
DAL
(l/h
)
Niv
el s
onor
o (d
b)
ALTURA (m)
ECKERLE CONDENSATE PUMPS
38
EE 1650M
This compact unit with integrated float switch is designed to be used inside devices equipped only with a condensate collecting tank such as fan convectors, cabinet models, built-in units, water collection consoles etc. Steps must be taken to ensure that no fluid runs over the pump!
Technical Data: > Pump unit (L x W x H): 244 x174 x144 mm> Electrical spec.: 230 V, 50/60 Hz, 40 VA> Max. flow rate: 32 l/h> Max. delivery height: 15 m> Tank capacity: 2 l> Alarm switch: 230 V, 8 A (ohmic load)> NO / NC (normally open / normally closed)> Alarm: max. 53 mm> Code: BCEEE1650 > Price: 191,00€
Transparent detector FloaterEasy maintenance. 3-level float switch.: > Alarm: max.23 mm. > Switch on pump: 18 +/- 2 mm. > Turn off pump: 14 +/- 2 mm. > Code: BCEBLOQUE1000 > Price: 46,00€
0
10
05 10 15
40
30
20
EE 1750M
EE 1650M
25
20
40
35
30
CAU
DAL
(l/h
)
Niv
el s
onor
o (d
b)
ALTURA (m)
EE 1200KThe EE1200K has particularly been designed for direct installation into the Eckerle-duct-system. Equal to the other volumetric systems of Eckerle the EE1200K comes with a high quality Swiss-made piston pump inside.These pumps were specially developed to deliver condensate water. They offer wide opening duck-bill-valves (non-sensitive against water borne contaminants) and further-more they run remarkably quiet. These details arrange a pump system with a long-life-cycle. They provide a higher-than-average performance even at great delivery heights.
Technical Data: > Pump unit (L x W x H): 78 x 42 x 46 mm> Electrical spec.: 230 V, 50 Hz, 18 VA> Sensor unit (L x W x H): 82 x 39 x 39 mm> Max. flow rate: 8 l/h> Max. delivery height: 6 m> Cable duct dimensions: 800 x 80 x 60 mm> Duct colour: RAL9016 (traffic white)> Alarm switch: max. 230 V, 8 A (ohmic load)> NO / NC (normally open / normally closed)> Insensitive to contamination due to unique valve design > Price: 132,00€ (Pump with duct) 105,00€ (Pump)
0 1
12
10
8
6
4
2
02 3 4 5 6 7 8
40
35
30
25
20
CAU
DAL
(l/h
)
Niv
el s
onor
o (d
b)
ALTURA (m)
For air conditioners up to 10 kW. Condensate pump swiss drive inside
For air conditioners up to 30 KW. Pump swiss drive inside
Description:The delivery system is equipped with 2 separately operating float switches. The working float switch turns the pump on and off depending on the filling level (with run-on time).The function of the alarm float switch is to isolate the break contact element.
Description:The EE1200K comes in a set with a duct, an elbow, a ceiling seal and instal-lation acces-sories.On request a special moulded foam part is available for different duct brands. This provides an easy mounting into pre-existing ducts.
39
EE 900M
The all new, patented and whipser-quiet EE900M, is designed to deliver condensate in noise-sensitive surroundings, e.g. in hotel rooms, meeting / board rooms and bedrooms. In contrast to conventional peristaltic pumps, the new EE900M works on the same principle as a reciprocating piston pump i.e. no peristaltic tube, resulting in a maintenance free pump with no wear and tear and no costly tube replacement. The ultra slow motion sequence of the piston ensures hyper silent sound pressure. The pump delivers a constant flow rate, depending on the delivery height.
Technical Data: > Pump unit: (L x W X H ): 152 x 85 x 114 mm> Elektrical spec.: 230 V, 50/60 Hz, 10VA> Max. flow rate: 6 l/h> Max. delivery height: 7 m> Max. suction height: 2 m (4 m on request)> Code: BCEEE900> Price: 170,00€
Check valve> Code: BCE22011> Price: 11,20€
0 2 4 6 8 10 12 14
6
5
4
3
2
1
0
40
35
30
25
20
7
CAU
DAL
(l/h
)
Niv
el s
onor
o (d
b)
ALTURA (m)
Reciprocating Pump
Made in Germany
EE 150 / EE 400M
The Eckerle condensate pumps EE150 and EE400M are designed to remove condensate water out of air conditioners, evaporator coils and high efficient gas fur-naces automatically. The pump housing is made from an impact-resistant plastic body against corrosion.
Technical Data: EE 150 > Pump unit (L x W x H): 165 x 65 x 85 mm> Electrical spec.: 230 V, 50/60 Hz, 48 VA> Max. flow rate: 120 l/h> Max. delivery height: 1,5 m> Tank capacity: max. 0,2 l> Pressure hose Ø: 8 x 2 mm> Code: BCEEE0150> Price: 62,00€
Technical Data: EE 400M
> Pump unit (L x W x H): 185 x 85 x 100 mm> Electrical spec.: 230 V, 50/60 Hz, 65 VA> Max. flow rate: 350 l/h> Max. delivery height: 4 m> Tank capacity: max. 0,5 l> Pressure hose Ø: 8 x 2 mm> Alarm switch: 230 V, 8 A (ohmic load)> NO / NC (normally open / normally closed)> Code: BCEEE0400> Price: 95,00€
Description:> Extremely quiet running and vibration-free> Pump encapsulated and liquid cooled> Protection class IP 55> Max. medium temperature: 70° C> Most compact design> Pump housing made of glass-reinforced plastic
material, including wall mounting accessory> Separate alarm contact> Integrated check valve> EE400M Premium: Version with additional alarm
detector (special plug with integrated LED and buzzer), incl. 6 m PVC-tube
Description:> Silent running centrifugal with 1,5 m power cord> Check valve to prevent back-flow of liquid into
the unit> Compact size> Attractive design> Cover with well-designed panel
Description:A world first innovation, the EE900M is configured to operate with 3 sensing options on a single standard pump: Cooling Signal, Temperature dif-ferential, 3 level float detectorOne Pump – 3 different sensing optionsThe pump is ordered standard and different sens-ing options are available, thus reducingcostly stock holding of multiple pump models.
Pump unit can be used in an extenal pan as wellPan height:min. 62 mmmax. 70 mm
0 1
100
02 3 4
350
280
220
25
20
40
35
30
CAU
DAL
(l/h
)
Niv
el s
onor
o (d
b)
ALTURA (m)
00
1 1,5
120
80
25
20
40
35
30
CAU
DAL
(l/h
)
Niv
el s
onor
o (d
b)
ALTURA (m)
For air conditioners up to 50 KW. Condensate pumps with tank
ECKERLE CONDENSATE PUMPS
45
46
GENERAL SALES CONDITIONS
Prices are per unit, list prices and do not include VAT. Prices are considered Ex-Works and can be changed by us without notice.If there is no precise indication, goods will be shipped with one of our forwarders.No complaint will be considered valid and accepted after two days from the receipt of goods.Any comment on the price invoiced must be done immediately.Orders are always accepted without commitment regarding delivery times.Delivery dates on order confirmations are approximate. Return of goods are not accepted unless authorized and carriage free.For any controversy, the place of jurisdiction is Barcelona, seat of our company,whatever are the way and the place agreed for the payment and the delivery. Gas Servei reverses the right to make any changes or improvements without prior notice.