gate valves - vinox engineering pte....

Bulletin B06-19

Gate Valves

CMI Pasquini S.p.A. originate in 1921 with the establishment of

the firm "Cocard Italiana di Ing. Pasquini & C.".

This company markets in the early years the valves manufactu-

red by the French company, then starts a manufacturing activity

under licence and year after year a considerable rise in local pro-

duction is recorded in comparison with the sales of the foreign

products.

The Second World War has a remarkable influence in this direc-

tion; the previous experience is used in order to develop their

own know-how and that permits the production of valves desi-

gned and manufactured completely in Italy with no more collabo-

ration with the French company.

In 1950 the company name is "Costruzioni Meccaniche

Industriali già Ing. Gino Pasquini S.p.A." and this trade name has

been maintained also after 1957, that is after the death of the

company founder. In the sixties - the period of the large industrial

expansion in Italy - CMI Pasquini S.p.A. are becoming very

important in the field of valves for heavy duty on the new ther-

moelectric, chemical and petrochemical plants.

We can say without hesitation that CMI Pasquini in those years

have been the only Italian producer in a position to ensure such

products and their continuous development in accordance with

the requirements of the users, which are not only Italian but also

located in foreign countries due to direct and indirect supplies.

In consideration of product importance, very close contacts and

collaboration with customers have always been fundamental to

verify from the beginning any possibility in the operating condi-

tions of the plants. That has been and is the constant policy of

CMI Pasquini.

End 1984 - thanks to the partnership of Cesare Bonetti S.p.A.,

leader in Italy and abroad in the field of high quality industrial val-

ves - a new substantial boost is given to modernization of mana-

ging, planning and manufacturing facilities and methods.

In 1992 the Company was merged to Cesare Bonetti S.p.A. as

CMI Pasquini Division.

2 BONETTI

CMI Pasquini

INDEX

Construction details . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4-5-6

Gate valves, split wedge, bolted bonnet

- ASME Class 600

Size 1.½” to 4” (DN 40 to 199) . . . . . . . . . . . . . . . . . . . . . . . . . .7

Gate valves, split wedge, pressure seal bonnet

- ASME Class 600 - size 4” to 24” (DN 100 to 600) . . . . . . . . .8-9

- ASME Class 900 - size 2” to 24” (DN 50 to 600) . . . . . . . .10-11

- ASME Class 1500 - size 2” to 24” (DN 50 to 600) . . . . . . .12-13

- ASME Class 2500 - size 2” to 24” (DN 50 to 600) . . . . . . .14-15

Gate valves, split wedge, seal welded bonnet

- ASME Class 1500, 2500, 3000 Special Class

size 2.½” (DN 65) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16

Gate Valves, parallel slide bolted bonnet

- ASME Class 600 - size 1.1/2" to 4" (DN 40 to 100) . . . . . . . . 17

Gate Valves, parallel slide pressure seal bonnet

- ASME Class 600 - size 4" to 24" (DN 100 to 600) . . . . . 18-19

- ASME Class 900 - size 2" to 24" (DN 50 to 600) . . . . . . 20-21



Materials . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .26

Buttwelding Ends ASME B16.25-1979 . . . . . . . . . . . . . . . .28-29

Ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .30

Page Page

Figure Number IndexFig. No. Page Fig. No. Page Fig. No. Page Fig. No. Page Fig. No. Page Fig. No. Page

101 4

102 5

103 5

104 5

105 6

106 6

107 28

108 28

109 28

110 28

121 7

122 8

122.1 8

123 9

123.1 9

125 11

126 12

127 13

128 14

129 15

130 16

131 17

131.1 17

132 18

132.1 18

133 19

133.1 19

134 20

135 21

136 22

137 23

138 24

139 25

Foreword

Bonetti’s “CMI Pasquini” production range consists of 3 sections:

Section 1 - Gate Valves

Section 2 - Globe, Check, Stop-Check Valves

Section 3 - Valves for Chemical Applications.

All above listed valves are suitable for high pressures and tempera-

tures (valves under Section 3 are also for application at ambient

and/or very low temperature conditions).

Main technical features of these valves have been verified and opti-

mized during 50 years directly by Bonetti/CMI on electric power

plants, in particular with applications on vessel feedwater, steam

shutoff, against backflow as well on chemical and petrochemical

plants.

Details on long Bonetti/CMI experience can be found in "Users List"

with indication of valves fitted on thermoelectric power plants and

other installations, where high reliability under severe operating con-

ditions is a constant request.

Bonetti/CMI are always assisting their customers, both enginee-

ring/manufacturing companies and end users, by integrating their

own know-how with that of the customers.

Consequently CMI production line is uptodated and meets the

highest engineering and quality levels. The pressure and temperatu-

re values as well the sizes listed in this bulletin shall be not

considered as a boundary of CMI's production range. As always

done, Bonetti can produce CMI special valves to meet customer's

requirements.

Bonetti have already supplied successfully CMI valves having rating

higher than Class 2500 Ib, for instance:

- Gate Valves 20" for main shutoff of boilers, manufactured accor-

ding to interpolated rating 2860 Ib Special Class,

- Gate Valves 2.1/2" for shutoff of boiler safety valve, manufactured

according to rating 4500 Ib Class.

Even the materials listed in this bulletin for bodies, bonnets and trims

shall be not considered as a limit. Bonetti often manufacture CMI val-

ves in special materials, in accordance with special design require-

ments and customer's requests.

Section 1

CMI Gate ValvesThis catalogue describes our gate valves only. The other

Sections of Cesare Bonetti’s CMI valves production are

described in other catalogues.

DESIGNLike all gate valves, CMI gate valves are straight through

two-directions flow valves, unless equalizer pipe is installed.

OPERATIONSLike all gate valves, CMI gate valves have to be utilized all-

open or all-closed.

CONNECTIONSCMI Gate valves illustrated in this catalogue have the follo-

wing pipe connections:

- Flanged Ends according to ASME B16.5 (usually for Class

600 Ib only, not for higher pressure Classes) or to different

Standard,

- Buttwelding Ends according to ASME B16.25 (see pages

30 and 31) or to different Standard.

We can supply gate valves with connections different from

the above, e.g.: Socket welding Ends to ASME B16.11, or dif-

ferent.

SIZES Bonetti’s CMI gate valves are currently manufactured in the

sizes from 1.1/2" (DN 40) up to 24" (DN 600).

RATINGSBonetti’s CMI gate valves currently manufactured as stan-

dard are suitable for the following Ratings:

ASME Class 600 - 900 - 1500 - 2500

As said in the foreword, Bonetti’s experience in CMI valves is

not limited within above limits, and we can supply valves up

to ASME Class 4500 or Special Classes.

Tables showing max operating conditions (pressure and tem-

perature) for Rating and Material Code are on page 30.

We want to point out that Cesare Bonetti’s CMI valves are

overdimensioned with respect to international Standards.

Actual max operating conditions can be given on request.

MATERIAL CODECMI Gate valves are manufactured in different Material

Codes. For "Material Code" we mean the material quality of

the valve components.

In the descriptive pages relevant to each valve (page 7 up to

25) are clearly indicated the materials used for the more

important components and Material Code.

Here below we list the main characteristic elements of the dif-

ferent Material Codes:

Exceptionally and compatibly with our moulds and die equip-

ment, some components usually of cast steel can be made

of the corresponding forged steel.

The Material Codes having their tag followed by a —Z are

Special constructions, slightly different from the standard

one.

STANDARDSBonetti’s CMI gate valves have been designed, rated, manu-

factured and inspected, where applicable, in accordance with

the most used international Standards, namely:

- ASME B16.34 -

Steel valves, Flanged and Butt-welding Ends

- ASME B16.10 -

Face-to-Face and End-to-End Dimensions

- Applicable Sections of ASME Boiler and Pressure Vessel

Code, including Nuclear Section III.

- MSS SP 44 Steel pipe line flanges

- MSS SP 61 Hydrostatic testing of steel valves

- API Standard 598 - Valve inspection and test

- ASME B16.25 - Buttwelding Ends

- TRD 110 (on request).

SHIPPING PREPARATION CMI valves are supplied only after undergoing the prescribed

dimensional and operating inspections.

For storage and shipment valves are adequately protected.

REQUESTS AND ORDERSTo guarantee perfect valve operation please state:

- Size of the valve (DN)

- Fluid

- Design conditions (pressure and temperature) or Rating

- Operating conditions (pressure and temperature)

- Operating ∆∆p

- Connections type

- Operating type (by handwheel, actuator, etc.)

- Installation type, that is the orientation of the valve within

the space

- Wanted materials

- Optionals

- Possible environmental and operating peculiarities.

3BONETTI

Material

Code

Material for

Body and Bonnet

Trim and

Hardfaced Surfaces

CB ASTM A216 WCB Stellite Gr. 6

C6 ASTM A217 WC6 Stellite Gr. 6

C9 ASTM A217 WC9 Stellite Gr. 6

C12A ASTM A217 C12A Stellite Gr. 6

4 BONETTI

CMI PASQUINIGate valvesASME Class 600 - 900 - 1500 - 2500

Construction Details

23

7

6

4

9

2

1

3

7

Fig. 101

5BONETTI

1 BODYAvailable of Carbon steel and various alloy steels, is usually

of cast material. For some sizes and classes can be of forged

material.

Machining is properly performed, for perfect aligment of all

elements. In its inner two fine machined grooves guide the

relevant tongues of the wedge or disk.

The seat rings are welded-in after complete finish. When the

bonnet is pressure seal (Fig. 102), a stainless steel inlay (26)

on the body-gasket sealing area guarantees effective and

long-life bonnet closure.

3 SEAT RINGS Both seat rings are stellite hardfaced, completely machined

and then welded into the body. Their shape does not allow

distorsions of sealing surfaces by pressure and temperature

changes.

Bore dimension of the seat rings is according to ANSI B16.34

- 1981 Table G-A1 and tolerances given on Paragraph 6.1.2.

2 BONNETUsually of the same material as body. It can be:

- bolted to the body, or

- pressure seal, or

- seal welded to the body.

Pressure sea! bonnet is pushed from inner pressure

against pressure seal gasket (10) which is kept in place by

the spacer ring (25) and the segmental ring (12), see Fig.

102, or directly by the yoke. Specially accurate are:

- easy beginning of pressure seal

- easy disassembling and reassembling.

Stem backseat area is hardfaced, usually Stellited.

4 WEDGEUsually two-pieces split wedge, for perfect sealability to the

seat rings. The wedge tongues are trapped and fully guided

by the body grooves which are long enough for the whole

stroke. The wedge is directly moved by the stem head

trapped between wedge halves.

This way: the stem is non-revolving; the point at which the

force acts is as down as possible; the height and the weight

of the valve are minimized.

Wedge seats are stellite hardfaced. Wedge tongues are

hardfaced, usually stellited (27).

In the gate wedges, the spacer (5) trasmits the closing force

through the wedge halves against the seat rings. To facilitate

field repairability, the spacer can be replaced with a thicker

one, without replacing the whole wedge. In the parallel slide

valves, the disk spring (5.1) keeps both disk halves against

the seat rings, to begin closure seal.

6 STEMOf 13% Chrome stainless steel, heat treated against corro-

sion and for the best mechanical features. Above the head

trapped between the two wedge halves (Fig. 104) the stem

has a conical shoulder which - when the valve is fully open -

is pulled against bonnet for effective backseating with axial

(not rotating) movement.

In the parallel slide valves, the stem can not rotate because

of indexing stop (21) which acts two more functions: the pos-

itive end of the stroke; the index of actual disk position.

Fig. 102

Fig. 103

Fig. 104

1 Body

2 Pressure seal

bonnet

10 Pressure seal

gasket

12 Segmental ring

25 Spacer ring

26 Stainless steel

inlay

1 Body

4 Split wedge

5 Spacer

27 Hardfaced

tongues

4 Split wedge

5 Spacer

6 Stem

6 BONETTI

18 YOKEUsually of Carbon steel, is very rugged and withstands the

thrusts of eventual actuator. Large windows allow easy acces

and ventilation of packing area. In the major sizes, the yoke

is locked to the body by a two pieces clamp (19) and two

clamp bolts (20). This connection is very stiff and allows easy

field maintenance. In the minor sizes, the yoke is screwed

and fixed to the body and permits same advantages.

7 YOKE NUTUsually of special bronze, but on request of Ni Resist

A439 D2. Widely sized, is very fine machined, to minimize

friction with stem. Every seizing possibility is excluded. Nut is

rotated by the handwheel through a key or by the actuator

through relevant adapter. Rotation of yoke nut is guaranted

by two roller bearings, when necessary by two tapered ones.

9 PACKINGIs made of an adequate number of preformed rings of an

approved high pressure - temperature quality. Special quali-

ties available on request.

The whole system Packing - Packing Chamber - Gland Stud

and Flange (15 and 15.1) - Gland Studs (16) is very careful-

ly designed and realized. It is as far as possible from fluid

flow, for longer packing life.

23 HANDWHEELSpoke handwheel is currently supplied. Other kind of control

is available and in some case is indispensable for good oper-

ation, for instance:

- chain wheel

- gear operator, eventually with universal joint and floor stand

- impactor handwheel

- electro-hydraulic actuator

- pneumatic actuator.

Actuator is usually supplied already mounted on the applica-

ble valve, for greater guarantee of the customer. In this field

customer's requirements are very different; therefore this cat-

alogue describes our valves without actuator even though it

is indispensable for operating. Our Technical Service usually

provides all data for exact fixing of supply.

OPTIONALSIn some operating conditions some optionals are advisable

and sometimes indispensable for good operation of the

valve, for instance:

- By-pass. Is a pipe outside the valve, connects the upstream

and the downstream of the valve and can be opened or

closed by the small by-pass valve to facilitate the operation

of the main valve.

- Equalizer pipe. Fig. 105. Is a pipe outside the valve and

connects the upstream and the central part of the valve

body. The equalizer pipe avoids dangerous overpressure in

the valve body when the valve is closed and the piping sys-

tem is reheated.

- Equalizer pipe and By-pass. Fig. 106. Is the installation on

the same valve of both aforesaid devices.

As for the pieces named in this pages but not itemized in Fig.

101, see the details at the foot of every single descriptive

page.

Fig. 105Equalizer pipe

Fig. 106Equalizer pipe and

By-pass

FLOW

FLOW

7BONETTI

CMI PASQUINI Gate Valves - split wedge - bolted bonnet ASME Class 600

Sizes 1.1/2" to 4" (DN 40 to 100)

Buttwelding or Flanged Ends

Material Codes currently manufactured are: CB, C6.

Connections usually manufactured are:

- Buttwelding Ends BW ASME B16.25 (Fig. 121)

- Flanged Ends RF ASME B16.5 (Fig. 121.1).

The relevant Ratings for each Material Code are shown on

page 30, for ASME Class 600.

Notes:

1 These valves have split wedge and intermediate spacer.

3 Dimensions expressed in millimeters, but converted from ori-

ginal Standard in inches, are rounded.

4 Exceptionally and compatibly with our moulds and die equip-


of corresponding forged steel.

5 Body-Bonnet sealability can be obtained by means of the

Gasket (10.1) or the Ring Joint (10.2).

7 Body Lenght L1 is according to ASME B16.10-Regular

Pattern.

8 On request flanges finishing can be other than RF. 12 The

Weight listed in the table is not binding.

23

24

16

9

8

2

10.1

4

5

7

22

6

15.1

15

10.2

24

11

3

1

Fig. 121.1

Fig.121 Fig.121.1

SIZE DIMENSIONS BW ENDS RF FLANGED ENDS

B C V L1 Weight D E F Holes ∅∅ Circle L1 Weight

mm inches mm mm mm mm kg mm mm mm No mm mm mm kg

40 1.1/2" 410 465 250 241,5 23 156 22,5 73 4 22 114 241,5 30

50 2" 450 510 250 292 28 165 25,5 92 8 19 127 292 48

65 2.1/2" 520 600 250 330 47 191 29,5 105 8 22 149 330 60

80 3" 610 705 300 355,5 58 210 32 127 8 22 168 355,5 76

100 4" 665 780 350 432 85 273 38 157 8 25 216 432 121

Item Component Material for Material Code

No Component CB C6

1 Body A216 WCB A217 WC6

2 Bonnet A216 WCB A217 WC6

3 Seat rings A105 + Stellite A182 F11 -I- Stellite

4 Wedae A216 WCB + Stellite A217 WC6 + Stellite

5 Spacer A182 F6 A182 F6

6 Stem A182 F6 A182 F6

7 Yoke nut B 148-952 B1 48-952

8 Backseat facing Stellite Stellite

9 Packing Graphite Graphite

10.1 Body^Bonnet gasket AISI 304 AISI 304

10.2 Body-Bonnet ring joint AISI 316 AISI 316

11 Body-Bonnet bolt A193 B7 A193 B7

15 Gland A182 F304 A 182 F304

15.1 Gland flange A105 A105

16 Gland stud A193 B7 A193 B7

22 Roller bearing Standard Standard

23 Handwheel Carbon Steel Carbon Steel

24 Nut A194 2H A194 2H

8 BONETTI

CMI PASQUINI Gate Valves - split wedge - pressure seal bonnetASME Class 600

Sizes 4" to 5" (DN 100 to 125)


Material Codes currently manufactured are: CB, C6, C9, C12A.






Notes:


3 Dimensions expressed in millimeters, but converted from

original Standard in inches, are rounded.

4 Exceptionally, and compatibly with our moulds and die

equipment, some components usually of cast steel can be

made of corresponding forged steel.

6 Body Lenght L is according to ASME B 16.10-Short Pattern.


Pattern.

8 On request flanges finishing can be other than RF.

12 The Weight listed in the table is not binding.

23

24

15.1

15

16

9

8

2

4

5

7

22

6

18

14

10

3

1

Fig. 122

Fig.122 Fig.122.1




100 4" 555 660 350 305 72 273 38 157 8 25 216 432 108

125 5" 630 750 400 381 105 330 45 186 8 29 266 508 165


No Component CB C6 C9 C12A

1 Body A216 WCB A217 WC6 A217 WC9 A217 C12A

2 Bonnet A216 WCB A217 WC6 A217 WC9 A217 WC9

3 Seat rings A105 + Stellite A182 F11 + Stellite A182 F22 + Stellite A182 F91 + Stellite

4 Wedge A216 WCB + Stellite A217 WC6 + Stellite A217 WC9 + Stellite A217 WC9 + Stellite

5 Spacer A182 F6 A182 F6 A182 F6 A182 F6

6 Stem A182 F6 A182 F6 A182 F6 Stainless Steel

7 Yoke nut B 148-952 B 148-952 B 148-952 B 148-952

8 Backseat facing Stellite Stellite Stellite Stellite

9 Packing Graphite Graphite Graphite Graphite

10 Pressure seal gasket A182 F316 A182 F316 A182 F316 A182 F316

14 Bonnet stud Alloy Steel Alloy Steel Alloy Steel Alloy Steel

15 Gland A 182 F304 A182 F304 A182 F304 A182 F304

15.1 Gland flange A105 A105 A105 A105

16 Gland stud A193 B7 A193 B7 A193 B7 A193 B7

18 Yoke A216 WCB A216 WCB A216 WCB A216 WCB

22 Roller bearing Standard Standard Standard Standard

23 Handwheel Carbon Steel Carbon Steel Carbon Steel Carbon Steel

24 Nut A194 2H A194 2H A194 2H A194 2H

9BONETTI


Sizes 6" to 24" (DN 150 to 600)








Notes:







6 Body Lenght L is according to ASME B16.10-Short Pattern.


Pattern.



7

22

24

16

18

19

20

12

10

4

5

3

1

23

6

15.1

15

9

24

13

14

2

8

Fig. 123

Fig.123 Fig.123.1




150 6" 680 830 450 457 165 356 48 216 12 29 292 559 237

200 8" 880 1080 500 584 290 419 56 270 12 32 349 660 402

250 10" 1060 1305 600 711 505 508 64 324 16 35 432 787 685

300 12" 1165 1470 700 813 720 559 67 381 20 35 489 838 930

350 14" 1225 1560 800 889 1040 603 70 413 20 39 527 889 1290

400 16" 1405 1795 800 991 1305 686 76 470 20 42 603 991 1660

450 18" 1695 2130 1000 1092 1620 743 83 533 20 45 654 1092 2050

500 20" 1820 2295 1000 1194 2240 813 89 584 24 45 724 1194 2775

600 24" 2050 2620 1000 1397 2940 940 105 692 24 51 838 1397 3690







5 Spacer A182 F6 A182 F6 A182 F6 A182 F6


7 Yoke nut B1 48-952 B 148-95 2 B 148-952 B 148-952




12 Segmental ring AISI 420 AISI 420 AISI 420 AISI 420

13 Bonnet flange A105 A105 A105 A105


15 Gland A 182 F304 A182 F304 A 182 F304 A 182 F304




19 Clamp A216 WCB A216 WCB A216 WCB A216 WCB

20 Clamp bolt A193 B7 A193 B7 A193 B7 A193 B7



24 Nut A194 2H A194 2H A194 2H A194 2H

10 BONETTI


Sizes 2" to 5" (DN 50 to 125)

Buttwelding Ends



- Buttwelding Ends BW ASME B16.25 (Fig. 124).



Notes:









23

24

15.1

15

16

9

8

2

4

5

7

22

6

18

14

10

3

1

Fig. 124

Fig.124

SIZE DIMENSIONS

B C V L Weight

mm inches mm mm mm mm kg

50 2" 480 535 300 216 30

65 2.1/2" 490 550 350 254 47

80 3" 500 560 400 305 50

100 4" 555 660 450 356 80

125 5" 650 770 500 432 130







5 Spacer A182 F6 A182 F6 A182 F6 A182 F6


7 Yoke nut B 148-952 B 148-952 B 148-952 B 148-952





15 Gland A 182 F304 A182 F304 A182 F304 A182 F304






24 Nut A194 2H A194 2H A194 2H A194 2H

11BONETTI


Sizes 6" to 24" (DN 150 to 600)

Buttwelding Ends



- Buttwelding Ends BW ASME B16.25 (Fig. 125). *



Notes:







9 Body Lenght L is according to ASME B16.10-Short Pattern

up to 16" (DN 400); for larger sizes, CMI standard.


7

22

24

16

18

19

20

12

10

4

5

3

1

23

6

15.1

15

9

24

13

14

2

8

Fig. 125

Fig.125

SIZE DIMENSIONS

B C V L Weight


150 6" 725 880 500 508 205

200 8" 905 1100 600 660 360

250 10" 1015 1265 700 787 660

300 12" 1170 1470 800 914 920

350 14" 1260 1590 800 991 1225

400 16" 1470 1840 1000 1092 1415

450 18" 1550 1965 1000 1219 1890

500 20" 1810 2250 1000 1321 2785

600 24" 1935 2490 1000 1549 4275







5 Spacer A182 F6 A182 F6 A182 F6 A182 F6


7 Yoke nut B1 48-952 B 148-95 2 B 148-952 B 148-952







15 Gland A 182 F304 A182 F304 A 182 F304 A 182 F304








24 Nut A194 2H A194 2H A194 2H A194 2H

12 BONETTI


Sizes 2" to 5" (DN 50 to 125)

Buttwelding Ends






Notes:







6 Body Lenght L is according to ASME B16.10 - Short Pattern.


23

24

15.1

15

16

9

8

2

4

5

7

22

6

18

14

10

3

1

Fig. 126

Fig.126

SIZE DIMENSIONS

B C V L Weight


50 2" 415 475 250 216 33

65 2.1/2" 505 580 300 254 55

80 3" 505 580 350 305 60

100 4" 550 655 450 406 95

125 5" 610 730 500 483 160







5 Spacer A182 F6 A182 F6 A182 F6 A182 F6


7 Yoke nut B 148-952 B 148-952 B 148-952 B 148-952





15 Gland A 182 F304 A182 F304 A182 F304 A182 F304






24 Nut A194 2H A194 2H A194 2H A194 2H

13BONETTI

CMI PASQUINI Gate Valves - split wedge - pressure seal bonnet ASME Class 1500

Sizes 6" to 24" (DN 150 to 600)

Buttwelding Ends

Material Codes currently manufactured are: CB, C6, C9, C12A



The relevant Ratings for each Material Code are showr on

page 30, for ASME Class 1500 Ib.

Notes:





ment, some components usually of cas steel can be made



up to 20" (DN 500); for larger sizes CMI standard.


7

22

24

16

18

19

20

12

10

4

5

3

1

23

6

15.1

15

9

24

13

14

2

8

Fig. 127

Fig.127

SIZE DIMENSIONS

B C V L Weight


150 6" 690 840 600 559 245

200 8" 880 1065 700 711 430

250 10" 1030 1260 800 864 720

300 12" 1240 1515 800 991 1100

350 14" 1350 1650 800 1067 1580

400 16" 1520 1860 1000 1194 1980

450 18" 1610 1995 1000 1346 2650

500 20" 1700 2130 1000 1473 3580

600 24" 2005 2530 1000 1943 5840







5 Spacer A182 F6 A182 F6 A182 F6 A182 F6


7 Yoke nut B1 48-952 B 148-95 2 B 148-952 B 148-952







15 Gland A 182 F304 A182 F304 A 182 F304 A 182 F304








24 Nut A194 2H A194 2H A194 2H A194 2H

14 BONETTI


Sizes 2" to 5" (DN 50 to 125)

Buttwelding Ends






Notes:









23

24

15.1

15

16

9

8

2

4

5

7

22

6

18

14

10

3

1

Fig. 128

Fig.128

SIZE DIMENSIONS

B C V L Weight


50 2" 435 495 400 279 45

65 2.1/2" 515 580 450 330 71

80 3" 515 585 500 368 78

100 4" 640 735 600 457 135

125 5" 715 830 600 533 220







5 Spacer A182 F6 A182 F6 A182 F6 A182 F6


7 Yoke nut B 148-952 B 148-952 B 148-952 B 148-952





15 Gland A 182 F304 A182 F304 A182 F304 A182 F304






24 Nut A194 2H A194 2H A194 2H A194 2H

15BONETTI


Sizes 6" to 24" (DN 150 to 600)

Buttwelding Ends






Notes:










7

22

24

16

18

19

20

12

10

4

5

3

1

23

6

15.1

15

9

24

13

14

2

8

Fig. 129

Fig.129

SIZE DIMENSIONS

B C V L Weight


150 6" 765 890 700 610 365

200 8" 910 1075 700 762 635

250 10" 1090 1395 800 914 1090

300 12" 1240 1475 1000 1041 1610

350 14" 1265 1515 1000 1118 2060

400 16" 1480 1780 1000 1245 2965

450 18" 1610 1940 1000 1397 3800

500 20" 1705 2070 1000 1575 5120

600 24" 1850 2280 1000 1676 6300







5 Spacer A182 F6 A182 F6 A182 F6 A182 F6


7 Yoke nut B1 48-952 B 148-95 2 B 148-952 B 148-952







15 Gland A 182 F304 A182 F304 A 182 F304 A 182 F304








24 Nut A194 2H A194 2H A194 2H A194 2H

16 BONETTI

CMI PASQUINI Gate Valves - split wedge - seal welded bonnet ASME Class 1500, 2500, 3000 Special Class

Size 2.1/2" (DN 65)

Buttwelding Ends

Material Codes currently manufactured are: C9-Z.


- Buttwelding Ends BW ASME B16.25.

Max operating conditions are:

3000 psi at 1020 °F (207 bar at 550 °C).

Notes:

- This valve has been expressly designed and realized as iso-

lating stop valve between pressure source and Vent valve

and can be closed only to allow servicing Vent valve without

shutting down the boiler.

- This valve is always supplied complete with a 9/16" by-pass

valve.

- Buttwelding Ends can be supplied semifinished.

7

22

6

2

8

4

5

23

24

15.1

16

9

28

1

3

Fig. 130

Fig.130

Item Component Material for Material Code Dimensions

No Component C9-Z Inches millimeters

1 Body A217 WC9 Size 2.1/2" 65

2 Bonnet A217 WC9 Bore at seat rings 2.1/2" 65

3 Seat rings A182 F304 + Stellite B 20" 508

4 Wedqe A217 WC9 + Stellite C 23.3/16" 589

5 Spacer A182 F6 V 20" 508

6 Stem A182 F6 L finished 14.1/2" 368

7 Yoke nut B 148-952 L semifinished 14.3/4" 375

8 Backseat facing Stellite R 9.5/16" 236

9 Packing Graphite S 8.11/16" 221

15.1 Gland flange A217 WC9 T open 19.3/16" 487

16 Gland stud A193 B7 T closed 18.5/8" 473

22 Roller bearing Standard Weight lb 265 kg 120

23 Handwheel Carbon Steel

24 Nut A194 2H

28 Hardfaced backseat Stellite

17BONETTI

CMI PASQUINI Gate Valves - parallel slide - bolted bonnet ASME Class 600

Sizes 1.1/2" to 4" (DN 40 to 100)


Material Codes currently manufactured are: CB, C6.






Notes:

2 These valves have split parallel disk and intermediate disk spring.






5 Body-Bonnet sealability can be obtained by means of the

Gasket (10.1) or the Ring Joint (10.2).

7 Body Lenght L1 is according to ASME B16.10 - Regular

Pattern.



7

22

6

24

16

8

10.1

2

4

5.1

3

1

23

21

17

15.1

15

9

24

10.2

11

Fig. 131.1

Fig.131 Fig.131.1




40 1.1/2" 460 515 250 241,5 25 156 22,5 73 4 22 114 241,5 32

50 2" 505 565 250 292 41 165 25,5 92 8 19 127 292 51

65 2.1/2" 580 660 250 330 50 191 28,5 105 8 22 149 330 63

80 3" 680 770 300 355,5 62 210 32 127 8 22 168 355,5 80

100 4" 740 855 350 432 92 273 38 157 8 25 216 432 128


No Component CB C6

1 Body A216 WCB A217 WC6

2 Bonnet A216 WCB A217 WC6

3 Seat rings A 105 + Stellite A182 F11 + Stellite

4 Disk A216 WCB + Stellite A217 WC6 + Stellite

5.01 Disk Spring Alloy steel Inconel

6 Stem A182 F6 A182 F6

7 Yoke nut B1 48-952 B 148-952

8 Backseat facing Stellite Stellite

9 Packinq Graohite Graphite

10.1 Body-Bonnet gasket AISI 304 AISI 304

10.2 Body-Bonnet ring joint AISI 316 AISI 316

11 Body-Bonnet bolt A193 B7 A193 B7

15 Gland A 182 F304 A 182 F304

15.1 Gland flange A105 A105

16 Gland stud A193 B7 A193 B7

17 Column A105 A105

21 Stem stop A105 A105

22 Roller bearing Standard Standard

23 Handwheel Carbon Steel Carbon Steel

24 Nut A194 2H A194 2H

18 BONETTI

CMI PASQUINI Gate Valves - parallel slide - pressure seal bonnetASME Class 600

Sizes 4" to 5" (DN 100 to 125)








Notes:

2 These valves have split parallel disk and intermediate disk

spring.







7 Body Lenght L1 is according to ASME B16.10 - Regular

Pattern.



23

7

22

6

21

17

24

15.1

16

15

9

14

2

8

10

1

5.1

3

4

Fig. 132

Fig.132 Fig.132.1




100 4" 620 725 350 305 77 273 38 157 8 25 216 432 113

125 5" 705 825 400 381 112 330 45 186 8 29 266 508 172





3 Seat rings A 105 + Stellite A182 F11 + Stellite A182 F22 + Stellite A182 F91+ Stellite

4 Disk A216 WCB + Stellite A217 WC6 + Stellite A217 WC9 + Stellite A217 WC9 + Stellite

5.1 Disk Spring Alloy steel Inconel Inconel Inconel


7 Yoke nut B 148-952 B1 48-952 B1 48-952 B1 48-952





15 Gland A182 F304 A182 F304 A182 F304 A182 F304



17 Column A105 A105 A105 A105

21 Stem stop A105 A105 A105 A105



24 Nut A194 2H A194 2H A194 2H A194 2H

19BONETTI


Sizes 6" to 24" (DN 150 to 600)








Notes:


spring.


original Standard in inches, are rounded. .J


ment, some components usually of cast steel can be

made of corresponding forged steel.



Pattern.



7

22

24

16

17

19

20

12

10

4

3

1

23

6

21

15.1

15

9

24

13

14

2

8

5.1

Fig. 133

Fig.133 Fig.133.1




150 6" 760 910 450 457 178 356 48 216 12 29 292 559 250

200 8" 995 1185 500 584 310 419 56 270 12 32 349 660 420

250 10" 1185 1430 600 711 535 508 64 324 16 35 432 787 715

300 12" 1305 1610 700 813 760 559 67 381 20 35 489 838 970

350 14" 1435 1710 800 889 1090 603 70 413 20 39 527 889 1340

400 16" 1570 1960 800 991 1370 686 76 470 20 42 603 991 1725

450 18" 1895 2310 1000 1092 1705 743 83 534 20 45 654 1092 2135

500 20" 2035 2510 1000 1194 2350 813 89 584 24 45 724 1194 2885

600 24" 2295 2965 1000 1397 3085 940 105 692 24 51 838 1397 3835









7 Yoke nut B1 48-952 B1 48-952 B1 48-952 B1 48-952


9 Packinq Graphite Graphite Graphite Graphite




14 Bonnet stud Alloy Steel Alloy Steel Allov Steel Allov Steel

15 Gland A182 F304 A182 F304 A 182 F304 A 182 F304



17 Column A105 A105 A105 A105



21 Stem stop A105 A105 A105 A105



24 Nut A194 2H A194 2H A194 2H A194 2H

20 BONETTI


Sizes 2" to 5" (DN 50 to 125)

Buttwelding Ends






Notes:


spring.








23

7

22

6

21

17

24

15.1

16

15

9

14

2

8

10

1

5.1

3

4

Fig. 134

Fig.134

SIZE DIMENSIONS

B C V L Weight


50 2" 535 590 300 216 32

65 2.1/2" 550 610 350 254 51

80 3" 560 620 400 305 54

100 4" 620 725 450 356 86

125 5" 725 -845 500 432 140





3 Seat rings A105 + Stellite A182 F11 + Stellite A1 82 F22 + Stellite A182 F91+ Stellite




7 Yoke nut B 148-952 B1 48-952 B1 48-952 B1 48-952





15 Gland A 182 F304 A182 F304 A182 F304 A182 F304



17 Column A105 A105 A105 A105

21 Stem stop A105 A105 A105 A105



24 Nut A194 2H A194 2H A194 2H A194 2H

21BONETTI


Sizes 6" to 24" (DN 150 to 600)

Buttwelding Ends






Notes:


spring.









7

22

24

16

17

19

20

12

10

4

3

1

23

6

21

15.1

15

9

24

13

14

2

8

5.1

Fig. 135

Fig.135

SIZE DIMENSIONS

B C V L Weight


150 6" 810 965 500 508 220

200 8" 1010 1205 600 660 385

250 10" 1135 1395 700 787 705

300 12" 1305 1605 800 914 975

350 14" 1410 1740 800 991 1290

400 16" 1640 2010 1000 1092 1495

450 18" 1730 2145 1000 1194 1965

500 20" 1990 2430 1000 1219 2885

600 24" 2170 2725 1000 1549 4450









7 Yoke nut B 148-952 B1 48-952 B 148-952 B1 48-952






14 Bonnet stud Alloy Steel Alloy Steel Alloy Steel Allov Steel

15 Gland A182 F304 A182 F304 A 182 F304 A 182 F304



17 Column A105 A105 A105 A105



21 Stem stop A105 A105 A105 A105



24 Nut A194 2H A194 2H A194 2H A194 2H

22 BONETTI


Sizes 2" to 5" (DN 50 to 125)

Buttwelding Ends






Notes:


spring.








23

7

22

6

21

17

24

15.1

16

15

9

14

2

8

10

1

5.1

3

4

Fig. 136

Fig.136

SIZE DIMENSIONS

B C V L Weight


50 2" 465 525 250 216 36

65 2.1/2" 565 640 300 254 59

80 3" 565 640 350 305 64

100 4" 615 720 400 406 102

125 5" 680 800 500 483 170





3 Seat rings A 105 + Stellite A182 F11 + Stellite A182 F22 + Stellite A182 F91+ Stellite




7 Yoke nut B1 48-952 B1 48-952 B1 48-952 B1 48-952





15 Gland A 182 F304 A182 F304 A182 F304 A182 F304



17 Column A105 A105 A105 A105

21 Stem stop A105 A105 A105 A105



24 Nut A194 2H A194 2H A194 2H A194 2H

23BONETTI


Sizes 6" to 24" (DN 150 to 600)

Buttwelding Ends






Notes:


spring.









7

22

24

16

17

19

20

12

10

4

3

1

23

6

21

15.1

15

9

24

13

14

2

8

5.1

Fig. 137

Fig.137

SIZE DIMENSIONS

B C V L Weight


150 6" 770 920 600 559 260

200 8" 980 1165 700 711 455

250 10" 1150 1380 800 864 760

300 12" 1380 1655 800 991 1250

350 14" 1495 1795 800 1067 1660

400 16" 1690 2030 1000 1194 2080

450 18" 1795 2180 1000 1346 2780

500 20" 1890 2320 1000 1473 3755

600 24" 2785 3310 1000 1943 5980









7 Yoke nut B1 48-952 B1 48-952 B1 48-952 B1 48-952


9 Packina Graphite Graphite Graphite Graphite





15 Gland A182 F304 A182 F304 A182 F304 A 182 F304



17 Column A105 A105 A105 A105



21 Stem stop A105 A105 A105 A105



24 Nut A194 2H A194 2H A194 2H A194 2H

24 BONETTI


Sizes 2" to 5" (DN 50 to 125)

Buttwelding Ends






Notes:


spring.








23

7

22

6

21

17

24

15.1

16

15

9

14

2

8

10

1

5.1

3

4

Fig. 138

Fig.138

SIZE DIMENSIONS

B C V L Weight


50 2" 485 545 400 279 48

65 2.1/2" 575 640 450 330 75

80 3" 575 645 500 368 83

100 4" 715 810 600 457 133

125 5" 800 915 600 533 230





3 Seat rings A105 + Stellite A182 F11 + Stellite A182 F22 + Stellite A182 F91+ Stellite


5.1 Disk Spring Alloy Steel Inconel Inconel Inconel


7 Yoke nut B 148-952 B1 48-952 B 148-952 B1 48-952





15 Gland A 182 F304 A 182 F304 A182 F304 A182 F304



17 Column ' A105 A105 A105 A105

21 Stem stop A105 A105 A105 A105



24 Nut A194 2H A194 2H A194 2H A194 2H

25BONETTI


Sizes 6" to 24" (DN 150 to 600)

Buttwelding Ends






Notes:


spring.









7

22

24

16

17

19

20

12

10

4

3

1

23

6

21

15.1

15

9

24

13

14

2

8

5.1

Fig. 139

Fig.139

SIZE DIMENSIONS

B C V L Weight


150 6" 855 980 700 610 390

200 8" 1015 1180 700 762 685

250 10" 1220 1425 800 914 1165

300 12" 1385 1620 1000 1041 1705

350 14" 1410 1660 1000 1118 2190

400 16" 1650 1950 1000 1245 3140

450 18" 1790 2120 1000 1397 3985

500 20" 1890 2255 1000 1575 5320

600 24" 2050 2420 1000 1676 6010







5.1 Disk Spring Alloy Steel Inconel Inconel Inconel


7 Yoke nut B 148-952 B 148-952 B 148-952 B1 48-952







15 Gland A182 F304 A182 F304 A 182 F304 A 182 F304



17 Column A105 A105 A105 A105



21 Stem stop A105 A105 A105 A105



24 Nut A194 2H A194 2H A194 2H A194 2H

26 BONETTI

MATERIALS

Chemical Analysis and Mechanical Features are given for

Customer’s convenience only. Actual and binding values are the

ones prescribed by original Standard

1 We utilise also steel with lower Carbon content (≤ 0,25%).

2 Mechanical features depend on heat treatment.

Prescribed heat treatment permits us to obtain the most suitable

physical and chemical characteristics.

3 Ratings of Tables on page 30 are those indicated by ASME

B 16.34 for Classes 600, 900, 1500, 2500, 4500 and extrapolated

for Classes 1700 - 2700.

4 Due to a possible transformation of carbide into graphite, ASME

B 16.34 does not recommend the use of Carbon steel valves

(CMI-BONETTI material Code “CB”) over 800 °F (425 °C) for

extended periods.

5 For A217 WC6 and A217 WC9 valves (CMI-BONETTI material

Code “C6” and “C9”), ASME B 16.34 recommends:

“Use normalised and tempered material only - Not to be usedover 1100 °F (595 °C)”.

6 At temperatures above 1000 °F (538 °C), material A351 CF8M

(CMI-BONETTI material Code CF8M), must be used only when

the Carbon content is 0.04% or higher.

7 As BONETTI’s CMI PASQUINI valves are oversized versus

International Standard prescription, including ASME B16.34,

effective maximum operating condition can be communicated on

request.

Notes for Materials(Those Notes apply also to Rating Tables on pag. 30)

Notes for Rating(Those Notes apply also to Rating Tables on pag. 30)

MaterialASTM

A216WCB

ASTM

A217WC6

ASTM

A217WC)

ASTM

A351CF8M

ASTM

A217C12A

Stellite

Gr.6

ASTM

A479

T.410C.3

ASTM

A193B7

ASTM

A182 F

XM 19

ASTM

A1942H

ASTM

B150

C62300

ASTM

B166

N06600

ASTM

A182F6

ASTM

A564T.630

Cond. H1075

ASTM

A453

Gr. 660

Chemical Analysis (Note 1)

Carbon % 0.35 max 0.10-0.20 0.15 max 0.08 max 0.08-0.12 1 0.13 max 0.38-0.48 0.06 max 0.40 max 0.15 max 0.15 max 0,07 0.08 max

Manganese % 0.60-105 0.30-0.80 0.30-0.60 2.00 max 0.30-0.60 1.00 max 0.75-1.00 4.0-6.0 0.5 max 1.0 max 1.00 max 1.0 max 2.00 max

Phosphorus % 0.04 max 0.04 max 0.04 max 0.04 max 0.02 max 0.04 max 0.04 max 0.04 max 0.04 max 0.04 max 0.04 max 0.040 max

Sulphur % 0.05 max 0.04 max 0.04 max 0.03 max 0.01 max 0.03 max 0.04 max 0.03 max 0.05 max 0.015 max 0.30 max 0.03 max 0.030 max

Silicon % 0.35 max 0.5-1.0 0.5 max 1.00 max 0.20-0.50 1.00 max 0.20-0.35 1.00 max 0.25 max 0.5 max 1.00 max 1.0 max 1.00 max

Chromium % 1.0-1.5 2.0-2.5 16.00-18.00 8.00-9.50 28 11.5-13.5 0.80-1.10 20.5-23.5 14.0-17.0 11.5-13.5 15.0-17.5 13.5-16.0

Nickel % 10.00-14.00 0.40 max 0.50 max 11.5-13.5 1.0 max 72 min+Co 0.50 max 3.0-5.0 24.0-27.0

Molybdenum % 0.44-0.65 0.87-1.13 2.00-3.00 0.85-1.05 0.15-0.25 1.5-3.0 1.2-2.0 1.0-1.5

Copper % 82.2 min 0.50 max 3.0-5.0

Aluminium % 8.5-10.0 0.35 max

Iron % 2.0-4.0 6.0-10.0

Cobalt % 66

Tungsten % 5

Titanium % 1.90-2.35

Columbium % 0.10-0.30

Mechanical features (Note 2) (Note 2) (Note 2)

Tensile Strengthpsi 70000 70000 75000 75000 85000 130000 125000 100000 78000 155000 110000 145000 130000

MPa 485 485 515 515 585 900 860 690 542 1.069 760 1000 895

Yield Strengthpsi 36000 40000 45000 30000 60000 100000 105000 55000 32000 90000 85000 125000 85000

MPa 250 275 310 205 415 690 720 380 221 620 585 862 585

Elongation on 2" %min 22 20 20 30 20 12 16 35 15 10 15 13 15

27BONETTI

1 Dotted lines denote maximum envelope for transition

from welding bevel and root face into body of compo-

nent.

2 Contour within the envelope is manufacturer's option

unless otherwise specifically ordered.

3 See ASME B16.25 Section 5 for tolerances other than

those given in these figures.

4 Intersections should be slightly rounded.

5 Linear dimensions are in inches with metric values

shown in millimeters in parenthesis.

6 All dimensions given in these two pages 28 and 29 are

for customer's convenience only. Actual and binding

values are the ones prescribed by original Standard.

28 BONETTI

Fig. 107 Welding end detail for joint without backing ring

for use on 0.88 in. (22 mm) and thinner nominal

wall thickness.

Fig. 108 Welding end detail for joint without backing ring

for use on nominal wall thickness greater than

0.88 in. (22 mm).

Fig. 109 Welding end detail for joint using continuous

rectangular backing ring.

Fig. 110 Welding end detail for joint using continuous

tapered backing ring.

Notes

A = Nominal outside diameter of component at welding

end, for cast steel valve.

B = Inside diameter at welding end.

C = Inside diameter at welding end, using backing ring.

t = Nominal wall thickness of the pipe.

Legenda

29BONETTI

Dimension of Welding ends1 2 4 5 6 7 4 5 6 7

Nominal

Pipe Size

Pipe

Schedule No.

English Units Metrical Units

A B C t A B C t

2.1/2

40

80

160

XXS

2.96

2.469

2.323

2.125

1.771

2.479

2.351

2.178

1.868

0.203

0.276

0.375

0.552

75

63

59

54

45

62,95

59,70

55,30

47,45

5,15

7,00

9,55

14,00

3

40

80

160

XXS

3.59

3.068

2.900

2.624

2.300

3.081

2.934

2.692

2.409

0.216

0.300

0.438

0.600

91

78

74

67

58

78,25

74,50

68,40

61.20

5,50

7,60

11,15

15,.25

3.1/240

804.12

3.548

3.364

3.564

3.402

0.226

0.318105

90

85

90,55

86,40

5,75

8,10

4

40 80

120

160

XXS

4.62

4.026

3.826

3.624

3.438

3.152

4.044

3.869

3.692

3.530

3.279

0.237

0.337

0.438

0.531

0.674

117

102

97

92

87

80

102,70

98,25

93,80

89,65

83,30

6,00

8,55

11,15

13,50

17,.10

5

40

80

120

160

XXS

5.69

5.047

4.813

4.563

4.313

4.063

5.070

4.866

4.647

4.428

4.209

0.258

0.375

0.500

0.625

0.750

144

128

122

116

110

103

128,80

123,60

118,05

112,45

106,90

6,55

9,55

12,70

15,90

19,.05

6

40

80

120

160

XXS

6.78

6.065

5.761

5.501

5.187

4.897

6.094

5.828

5.600

5.326

5072

0.280

0.432

0.562

0.719

0.864

172

154

146

140

132

124

154,80

148,05

142,25

135,30

128,85

7,10

10,95

14,25

18,25

21,.95

8

40

60

80

100

120

140

XXS

160

8.78

7.981

7.813

7.625

7.437

7.187

7.001

6.875

6.813

8.020

7.873

7.709

7.544

7.326

7.163

7.053

6.998

0.322

0.406

0.500

0.594

0.719

0.812

0.875

0.906

223

203

198

194

189

183

178

175

173

203,70

199,95

195,80

191,60

186,10

181,95

179,15

177,75

8,20

10,30

12,70

15,10

18,25

20,60

22,25

23,00

10

40

60

80

100

120

140

160

10.94

10.020

9.750

9.562

9.312

9.062

8.750

8.500

10.070

9.834

9.670

9.451

9.232

8.959

8740

0.365

0.500

0.594

0.719

0.844

1.000

1.125

278

255

248

243

237

230

222

216

255,80

249,80

245,60

240,05

234,50

227,55

222,00

9,25

12,70

15,10

18,25

21,45

25,40

28,60

12

STD

40

XS

60

80

100

120

140

160

0,567361

12.000

11.938

11.750

11.626

11.374

11.062

10.750

10.500

10.126

12.053

11.999

11.834

11.725

11.505

11.232

10.959

10.740

10.413

0.375

0.406

0.500

0.562

0.688

0.844

1.000

1.125

1.312

329

305

303

298

295

289

281

273

267

257

306,15

304,75

300,60

297,80

292,25

285,30

278,35

272,80

264,50

9,55

10,30

12,70

14,25

17,50

21,45

25,40

28,60

33,30

14

STD

40

XS

60

80

100

120

140

160

14.25

12.250

13.124

13.000

12.812

12.500

12.124

11.812

11.500

11.188

13.303

13.192

13.084

12.920

12.646

12.318

12.044

11.771

11.498

0.375

0.438

0.500

0.594

0.750

0.938

1.094

1.250

1.406

362

337

333

330

325

318

308

300

292

284

337,90

335,10

332,35

328,15

321,20

312,90

305,90

299,00

292,05

9,55

11,15

12,70

15,10

19,05

23,85

27,80

31,75

35,70

16

STD

40

60

80

100

120

140

160

16.25

15.250

15.000

14.688

14.312

13.938

13.562

13.124

12.812

15.303

15.084

14.811

14.482

14.155

13.826

13.442

13.170

0.375

0.500

0.656

0.844

1.031

1.219

1.438

1.594

413

387

381

373

364

354

344

333

325

388,70

383,15

376,20

367,85

359,55

351,20

341,45

334,50

9,55

12,70

16,65

21,45

26,20

30,95

36,55

40,50

18

STD

XS

40

60

80

100

120

140

160

18.28

17.250

17.000

16.876

16.500

16.124

15.688

15.250

14.876

14.438

17.303

17.084

16.975

16.646

16.318

15.936

15.553

15.225

14.842

0.375

0.500

0.562

0.750

0.938

1.156

1.375

1.562

1.781

464

438

432

429

419

410

398

387

378

367

439,50

433,95

431,15

422,80

414,50

404,75

395,05

386,70

377,00

9,55

12,70

14,25

19,05

23,85

29,35

34,95

39,65

45,25

20

STD

XS

40

60

80

100

120

140

160

20.31

19.250

19.000

18.812

18.376

17.938

17.438

17.000

16.500

16.062

19.303

19.084

18.920

18.538

18.155

17.717

17.334

16.896

16.513

0.375

0.500

0.594

0.812

1.031

1.281

1.500

1.750

1.969

516

489

483

478

467

456

443

432

419

408

490,30

484,75

480,55

470,85

461,15

450,00

440,30

429,15

419.45

9,55

12,70

15,10

20,60

26,20

32,55

38,10

44,45

50,00

22

STD

XS

60

80

100

120

140

160

22.34

21.250

21.000

20.250

19.750

19.250

18.750

18.250

17.750

21.303

21.084

20.428

19.990

19.553

19.115

18.678

18240

0.375

0.500

0.875

1.125

1.375

1.625

1.875

2.125

567

540

533

514

502

489

476

464

451

541,10

535,55

518,85

507,75

496,65

485,50

474,40

463,30

9,55

12,70

22,25

28,60

34,95

41,30

47,65

54,00

24

STD

XS

30

40

60

80

100

120

140

160

24.38

23.250

23.000

22.876

22.624

22.062

21.562

20.938

20.376

19.876

19.312

23.303

23.084

22.975

22.755

22.263

21.826

21.280

20.788

20.350

19.857

0.375

0.500

0.562

0.688

0.969

1.219

1.531

1.812

2.062

2.344

619

591

584

581

575

560

548

532

518

505

491

591,90

586,35

583,55

578,00

565,50

554,40

540,50

528,00

516,90

504,35

9,55

12,70

14,25

17,50

24,60

30,95

38,90

46,00

52,35

59,55

30 BONETTI

RATING (See Notes on page 26)

Operating

Temperature

°C

Max Operating Pressure (bar) Max Operating Pressure (bar) Max Operating Pressure (bar) Max Operating Pressure (bar) Max Operating Pressure (bar)

ASME Class 600 ASME Class 900 ASME Class 1500 ASME Class 2500 ASME Class 4500

Material Code Material Code Material Code Material Code Material Code

CB C6 C9 CF8M C12A CB C6 C9 CF8M C12A CB C6 C9 CF8M C12A CB C6 C9 CF8M C12A CB C6 C9 CF8M C12A

Me

tr

ic

al

U

ni

ts

-29 +38 102,1 103,4 103,4 99,3 153,2 155,1 155,1 148,9 155,1 255,3 258,6 258,6 248,2 258,6 425,5 430,9 430,9 413,7 430,9 765,9 775,7 775,7 744,6 775,7

50 102,1 103,4 103,4 99,3 103,4 150,4 155,1 155,1 144,3 155,1 250,6 258,6 258,6 240,6 258,6 417,7 430,9 430,9 400,9 430,9 751,9 775,7 775,7 721,7 775,7

100 100,2 103,4 103,4 96,2 103,4 139,8 154,4 154,6 126,6 154,6 233,0 257,4 257,6 211,0 257,6 388,3 429,0 429,4 351,6 429,4 699,0 772,2 773,0 632,9 773,0

150 93,2 103,0 103,0 84,4 103,0 135,2 149,2 150,6 115,5 150,6 225,4 248,7 250,8 192,5 250,8 375,6 414,5 418,2 320,8 418,2 676,1 746,2 752,8 577,4 752,8

200 90,2 99,5 100,3 77,0 100,3 131,4 143,9 145,8 107,0 145,8 219,0 239,8 243,4 178,3 243,4 365,0 399,6 405,4 297,2 405,4 657,0 719,4 729,8 534,9 729,8

250 87,6 95,9 97,2 71,3 97,2 125,8 139,0 139,0 100,1 139,0 209,7 231,8 231,8 166,9 231,8 349,5 386,2 386,2 278,1 386,2 629,1 694,8 694,8 500,6 694,8

300 83,9 92,7 92,7 66,8 92,7 119,5 128,6 128,6 94,9 128,6 199,1 214,4 214,4 158,1 214,4 331,8 357,1 357,1 263,5 357,1 597,3 642,6 642,6 474,3 642,6

350 79,6 85,7 85,7 63,2 85,7 116,1 124,0 124,0 92,7 124,0 193,6 206,6 206,6 154,4 206,6 322,6 344,3 344,3 257,4 344,3 580,7 619,6 619,6 463,3 619,6

375 77,4 82,6 82,6 61,8 82,6 112,7 120,7 120,7 91,0 120,7 187,8 201,1 201,1 151,6 201,1 313,0 335,3 335,3 252,7 335,3 563,5 603,3 603,3 454,9 603,3

400 75,1 80,4 80,4 60,7 80,4 109,1 116,5 116,5 89,6 116,5 181,8 194,1 194,1 149,4 194,1 303,1 323,2 323,2 249,0 323,2 545,5 581,8 581,8 448,2 581,8

425 72,7 77,6 77,6 59,8 77,6 104,2 109,8 109,8 88,3 109,8 173,6 183,1 183,1 147,2 183,1 289,3 304,9 304,9 245,3 304,9 520,8 548,5 548,5 441,6 548,5

450 69,4 73,3 73,3 58,9 73,3 86,3 105,1 105,1 87,4 105,1 143,8 175,1 175,1 145,7 175,1 239,7 291,6 291,6 242,9 291,6 431,5 524,7 524,7 437,1 524,7

475 57,5 70,0 70,0 58,3 70,0 69,0 101,4 101,4 86,5 101,4 115,0 169,0 169,0 144,2 169,0 191,7 281,8 281,8 240,4 281,8 345,1 507,0 507,0 432,7 507,0

500 46,0 67,7 67,7 57,7 67,7 52,3 95,1 95,1 86,0 95,1 87,2 158,2 158,2 143,4 158,2 145,3 263,9 263,9 238,9 263,9 261,5 474,8 474,8 430,1 474,8

525 34,9 63,4 63,4 57,3 63,4 35,3 77,2 84,7 84,7 84,7 58,8 128,6 140,9 140,9 140,9 97,9 214,4 235,0 235,0 235,0 176,3 385,9 423,0 423,0 423,0

538 23,5 51,5 56,5 56,5 56,5 17,7 44,7 55,3 75,2 75,2 29,5 74,5 92,2 125,5 125,5 49,2 124,1 153,7 208,9 208,9 88,6 223,4 276,6 375,8 375,8

550 11,8 29,8 36,9 50,0 50,0 38,1 46,9 74,8 74,8 63,5 78,2 124,9 124,9 105,9 130,3 208,0 208,0 190,6 234,5 374,2 374,2

575 25,4 31,3 49,8 49,8 26,4 31,6 71,8 71,8 44,0 52,6 119,7 119,7 73,4 87,7 199,5 199,5 132,0 157,9 359,1 359,1

600 17,6 21,1 47,9 47,9 18,3 20,7 59,7 58,5 30,5 34,4 99,5 97,5 50,9 57,4 165,9 162,5 91,6 103,3 298,6 292,5

625 12,2 13,8 39,8 39,0 12,8 13,4 47,4 43,8 21,3 22,3 79,1 73,0 35,5 37,2 131,8 121,6 63,9 66,9 237,2 219,1

650 8,5 8,9 31,6 29,2 8,5 8,5 38,0 29,8 14,2 14,2 63,3 49,6 23,6 23,6 105,5 82,7 42,6 42,6 189,9 148,9

675 5,7 5,7 25,3 19,9 31,0 51,6 86,0 154,8

700 20,6 25,1 41,9 69,8 125,7

725 16,8 21,0 34,9 58,2 104,8

750 14,0 17,6 29,3 48,9 87,9

775 11,7 13,7 22,8 38,0 68,4

800 9,0 10,5 17,4 29,2 52,6

816 7,0 8,6 14,1 23,8 42,7

Note 4 Note 5 Note 5 Note 6 Note 4 Note 5 Note 5 Note 6 Note 4 Note 5 Note 5 Note 6 Note 4 Note 5 Note 5 Note 6 Note 4 Note 5 Note 5 Note 6

Hydrostatic Testing Pressure (bar)

Shell 153,2 155,1 155,1 149,0 155,1 229,8 232,7 232,7 223,4 232,7 383,0 387,9 387,9 372,3 387,9 638,3 646,4 646,4 620,6 646,4 1148,9 1163,6 1163,6 1116,9 1163,6

Seat 112,3 113,7 113,7 109,2 113,7 168,5 170,6 170,6 163,8 170,6 280,8 284,5 284,5 273,0 284,5 468,1 474,0 474,0 455,1 474,0 842,5 853,3 853,3 819,1 853,3

RATING (See Notes on page 26)

Operating

Temperature

°F

Max Operating Pressure (psi) Max Operating Pressure (psi) Max Operating Pressure (psi) Max Operating Pressure (psi) Max Operating Pressure (psi)

ASME Class 600 ASME Class 900 ASME Class 1500 ASME Class 2500 ASME Class 4500

Material Code Material Code Material Code Material Code Material Code

CB C6 C9 CF8M C12A CB C6 C9 CF8M C12A CB C6 C9 CF8M C12A CB C6 C9 CF8M C12A CB C6 C9 CF8M C12A

En

gl

is

h

Un

it

s

-20 +100 1480 1500 1500 1440 1500 2220 2250 2250 2160 2250 3705 3750 3750 3600 3750 6170 6250 6250 6000 6250 11110 11250 11250 10800 11250

200 1360 1500 1500 1240 1500 2035 2250 2250 1860 2250 3395 3750 3750 3095 3750 5655 6250 6250 5160 6250 10185 11250 11250 9290 11250

300 1310 1445 1455 1120 1455 1965 2165 2185 1680 2185 3270 3610 3640 2795 3640 5450 6015 6070 4660 6070 9815 10830 10925 8390 10925

400 1265 1385 1410 1025 1410 1900 2080 2115 1540 2115 3170 3465 3530 2570 3530 5280 5775 5880 4280 5880 9505 10400 10585 7705 10585

500 1205 1330 1330 955 1330 1810 1995 1995 1435 1995 3015 3325 3325 2390 3325 5025 5540 5540 3980 5540 9040 9965 9965 7165 9965

600 1135 1210 1210 900 1210 1705 1815 1815 1355 1815 2840 3025 3025 2255 3025 4730 5040 5040 3760 5040 8515 9070 9070 6770 9070

650 1100 1175 1175 890 1175 1650 1765 1765 1330 1765 2745 2940 2940 2220 2940 4575 4905 4905 3700 4905 8240 8825 8825 6660 8825

700 1060 1135 1135 870 1135 1590 1705 1705 1305 1705 2665 2840 2840 2170 2840 4425 4730 4730 3620 4730 7960 8515 8515 6515 8515

750 1015 1065 1065 855 1065 1520 1595 1595 1280 1595 2535 2660 2660 2135 2660 4230 4430 4430 3560 4430 7610 7970 7970 6410 7970

800 825 1015 1015 845 1015 1235 1525 1525 1265 1525 2055 2540 2540 2110 2540 3430 4230 4230 3520 4230 6170 7610 7610 6335 7610

850 640 975 975 835 975 955 1460 1460 1255 1460 1595 2435 2435 2090 2435 2655 4060 4060 3480 4060 4785 7305 7305 6265 7305

900 460 900 900 830 900 690 1350 1350 1245 1350 1150 2245 2245 2075 2245 1915 3745 3745 3460 3745 3455 6740 6740 6230 6740

950 275 640 755 775 775 410 955 1160 1160 1160 685 1595 1930 1930 1930 1145 2655 3220 3220 3220 2055 4785 5795 5795 5795

1000 170 430 535 700 725 255 650 800 1050 1090 430 1080 1335 1750 1820 715 1800 2230 2915 3030 1285 3240 4010 5245 5450

1050 290 350 685 720 430 525 1030 1080 720 875 1720 1800 1200 1455 2865 3000 2160 2625 5155 5400

1100 190 220 610 605 290 330 915 905 480 550 1525 1510 800 915 2545 2515 1440 1645 4575 4525

1150 130 135 475 445 195 205 710 670 325 345 1185 1115 545 570 1970 1855 975 1030 3550 3345

1200 80 80 370 290 125 125 555 430 205 205 925 720 345 345 1545 1200 615 615 2775 2160

1250 295 440 735 1230 2210

1300 235 350 585 970 1750

1350 190 290 480 800 1440

1400 150 225 380 630 1130

1450 115 175 290 485 875

1500 85 125 205 345 620

Note 4 Note 5 Note 5 Note 6 Note 4 Note 5 Note 5 Note 6 Note 4 Note 5 Note 5 Note 6 Note 4 Note 5 Note 5 Note 6 Note 4 Note 5 Note 5 Note 6

Hydrostatic Testing Pressure (psig)

Shell 2220 2250 2250 2160 2250 3330 3375 3375 3240 3375 5557,5 5625 5625 5400 5625 9255 9375 9375 9000 9375 16665 16875 16875 16200 16875

Seat 1628 1650 1650 1584 1650 2442 2475 2475 2376 2475 4075,5 4125 4125 3960 4125 6787 6875 6875 6600 6875 12221 12375 12375 11880 12375

31BONETTI

CNC Machining Center for valves up to size 36”CNC Machining Center for valves up to size 36”

CNC Machining Center for valves up to size 18”CNC Machining Center for valves up to size 18”

Gate 14” Gate 14” ASMEASME Class 2500Class 2500Gate 14” Gate 14” ASMEASME Class 1500Class 1500

in in ASTMASTM A217 C12AA217 C12A materialmaterial

Gates 12” Gates 12” ASMEASME Class 1500Class 1500

BONETTI’BONETTI’s CMIs CMI PPASQUINI valves assembling depASQUINI valves assembling departmentartment

Gate 28” Gate 28” ASMEASME Class 900Class 900

under Hydrostunder Hydrostatic pressure testatic pressure test

Gates 8” Gates 8” ASMEASME Class 4500Class 4500

In 1905, Cesare Bonetti opened a shop in Milan, Italy, to man-

ufacture small hand valves to meet the local demand. In the

early 1920s, this small but growing firm, took on a new industri-

al look and moved into the production and sale of industrial

valves.

BONETTI®, by this time, had become a well known companyfor the production of piston valves, sleeve-packed cocks, and

glass level gauges. Subsequently, the production range, bearing

the BONT® and CMI Pasquini® registered trademarkswas increased to include new valves for high temperature and

high pressure service designed to meet the strictest require-

ments of the time and using the most advanced design and man-

ufacturing technology. This included double sealing valves, bel-

lows valves, diaphragm valves, and magnetic level gauges.

After two expansions, in 1969, the company moved to its new

headquarters and main factory in Garbagnate Milanese, where

Bonetti continues its passion for growth through research, devel-

opment and design accuracy. Such expansion continued with

the new factories of Limburg an der Lahn (Germany) and

Suzhou (Popular Republic of China).

Production facilities are supported by international joint-ventures

and by a sales network serving Customers in the whole world.

In 2005 BONETTI purchased Williams Valve Engineering ball

valves business and manufacturing, moving all facilities in its

Garbagnate main factory.

WVE (Williams Valve Engineering) trademark is now identi-fying the new Bonetti’s ball valve line.

This, in turn, increases its opportunities to continue to grow and

expand.

Facilities:

Enclosed surface 66,000 sq.m

Offices building (with car parking

below) for three stories 2,200 sq.m

Facilities building (mess-hall, locker

rooms, sanitary department, etc.)

for three stories 2,000 sq.m

Manufacturing shed (including

Production Department and

general Facilities) 19,000 sq.m

Co

nc.S

MA

283/9

3

CCEESSAARREE BBOONNEETTTTII SS..pp..AA..I-20024 GARBAGNATE MILANESE (Italy)Via Cesare Bonetti 17Telephone: +3902 990721Telefax: +3902 9952483Internet web site: http://www.cesare-bonetti.itE-mail: [email protected]

Bonetti Armaturen Vertriebs GmbHD-65549 Limburg an der Lahn (Germany)In den Fritzenstücker, 4

BONETTI (Suzhou) Level Gauges & Valves Co., Ltd.Yuandong Gongyefang, Minsheng Road, Shengpu District, Suzhou Industrial Park, Jiangsu, China 215021

Domestic sales: Telephone: +39 02 99 072 333Telefax: +39 02 99 072 300E-mail: [email protected]

Export sales: Telephone: +39 02 99 072 444Telefax: +39 02 99 072 400E-mail: [email protected]

Sales Office Telephone: +49 06431 598310Telefax: +49 06431 598329E-mail: [email protected]

Sales Office Phone +86-512-6281 6390Fax: +86-512-6281 6396E-mail: [email protected]

A wide international sales networkPlease apply for more information about our International Technical Sales Organisation

This catalogue is exclusive property of Cesare Bonetti S.p.A. Any unauthorised reproduction, in total or in part, of this catalogue shall be prosecuted.

Products and data sheets on this catalogue reflect current standard production. Cesare Bonetti S.p.A. reserves the right to carry out amendments to products and

materials. Amendments or modifications to drawings and materials can be done also to comply with particular Customer’s request or technical specifications.

gate valves - vinox engineering pte....

Documents