gauge valves and instrumentation manifolds - … mr0175 seat acetal or peek ... (for rp) male metric...
TRANSCRIPT
Gauge Valves and Instrumentation ManifoldsGV, GR Series2-valve, 3-valve and 5-valve Manifold Series
www.nacoroke.com
Nantong Naco Fluid Equipment Co.,LTD
Pingchao Town, Tongzhou Area, Nantong City, jiangsu Province, China Tel:86-513-85400443 Fax:86-513-85400444
E-mail:[email protected]
Features
Gauge Valves
Annealed316 SS/A479
Alloy R-405/B164
Annealed316 SS/A479
NACE MR0175
Seat Acetal or PEEK or PFA
Molybdenum disulfide-basedLubricant
Alloy 400/B164, B127,B564
Alloy R-405/B164
316 SS/A276
Alloy 400
Alloy R-405/B164
304 SS
Stainless steelLock Pin
316 SS
316 SS/A479
17-4PH
316 SS/A479316 SS/A182
PTFE or graphite
9
Part
316 SS/A276
Chrome-plated316 SS/A276
Lower Stem
12
10
11 Body
Packing8
Stainless steel
Anodized aluminum
Gland
Bonnet
Lock Nut
Packing Bolt
Upper Stem
Set Screw
Handle
7
6
5
4
3
Item
2
Valve Body Material
1
◎
◎
◎
◎
◎
◎
◎
◎
◎
◎
◎
◎
◎
◎
Maximum working pressure:
Stainless steel: up to 6000 psig (414 bar)
Alloy 400: up to 5000 psig (345 bar)
GV series working temperature:
PTFE packing: -65 F to 450 F (-54 C to 232 C)
Graphite packing: -65 F to 1200 F (-54 C to 649 C)
GR series working temperature:
Acetal seat: -20 F to 250 F (-28 C to 121 C)
PEEK seat: -20 F to 400 F (-28 C to 204 C)
PFA seat: -20 F to 400 F (-28 C to 204 C)
Non-rotating lower stem, ball tip and plug tip designs
Variety of materials for seat and packing
Safety back seating seals in fully open position
Rolled spindle operating threads
Lubricant for stem thread isolated from the media
Externally adjustable gland
Bonnet locking pin fitted as standard
Low torque operating T bar handle
Option for different colored handles
Steady and durable fastening of the handle by double lock-pins
Leak-tight performance testing for every valve with nitrogen at
the maximum working pressure
° ° ° °
° ° ° °
° ° ° °
° ° ° °
° ° ° °
GV Series and GR Series
Standard Materials of Construction
Process interface valves for sour gas service are available. Materials are selected in accordance with
NACE MR0175/ISO 15156. Contact the authorized representative or if any request.NACO Group
Plug Tip Design Valves (GR)
Ball Tip Design Valves (GV)
Gauge Valves and Instrumentation Manifolds 1
1
2
3
4
56
7
89
10
11
12
1
2
3
4
56
789
10
11
01
21
2-valve Manifolds
3-valve Manifolds
5-valve Manifolds and C Integral Manifolds
Instrumentation Manifolds
GV Series and GR Series
Contents
Gauge Valves
12
The Auxiliary Installation for Manifolds and Transmitters of Different Brands
Rosemount, EJA, Honeywell and SIEMENS Transmitters
06
10
Plug Tip Design Valves
Ball Tip Design Valves
Based on graphite stem packing.
Pressure vs. Temperature
Temperature ( )°C
Temperature ( F)°
Pre
ssu
re (
psi
g)
Pre
ssu
re (
ba
r)
Alloy 400
-54 38 149 260 371 482 593 704448
414
379
345
310
276
241
207
172
138
103
69
35
0
6500
6000
5500
5000
4500
4000
3500
3000
2500
2000
1500
1000
500
0-65 100 300 500 700 900 1100 1300
316 SS
Pressure vs. Temperature
1. Rating limited to 250 F (121 C) max. with acetal seat material, not recommended
for temperature higher than 200 F (93 C) for water and steam application.
2. Based on PEEK seat and PTFE stem packing.
° °
° °
Alloy 400
Temperature ( )°C
Pre
ssu
re (
psi
g)
Pre
ssu
re (
bar)
Temperature ( F)°
-65 0 100 200 300 400 500 600 700
6500
6000
5500
5000
4500
4000
3500
3000
2500
2000
1500
1000
500
0
448
414
379
345
310
276
241
207
172
138
103
69
35
0
-54 -18 38 93 149 204 260 316 371
316 SS
2 Gauge Valves and Instrumentation Manifolds Gauge Valves and Instrumentation Manifolds 3
Instrument
Test/vent
Plug
Process
Isolate
Instrument
Test/vent
Plug
Process
Isolate
Types and Dimensions
Lagging extension body is inserted through pipe for insulation.
Ball Tip
Plug Tip
Plug Tip
Design
Ball Tip
Miniature Type
Standard Type
Inlet/Process Outlet/Instrument
1/2 Male NPT 1/2 Female NPT1/2 Female NPT
Test/Vent/Plug
Inlet/Process Outlet/Instrument
1/2 Male NPT 1/2 Female NPT1/2 Female NPT
Test/Vent/Plug
GV□□-NS8-FNS8-E
GR□□ -NS8-FNS8-E
Basic Ordering Number
Basic Ordering Number
GV□□-NS8-FNS8
GR □□-NS8-FNS8
GV□□-NS12-FNS12
GR □□-NS12-FNS123/4 Male NPT 1/2 Female NPT3/4 Female NPT
Lagging Extension Body Type
3.69"(93.7)
3.2
2"
(81.9
)
7.25"(184.15)
4.84"(123.0)
1.50"(38.1) 1.25"
(31.75)
1.2
5"
(31.7
5)
5.38"(136.53)
2.97"(75.4)
1.50"(38.1)
1.25"(31.75)
1.2
5"
(31
.75
)
1.13"(28.6)
1.1
3"
(28.6
)
Instrument
Vent
Process
IsolateInlet/Process Outlet/Instrument
1/2 Male NPT 1/2 Female NPT
Basic Ordering Number Vent
Vent stemGV□□-NS8-FNS8-C
GR□□-NS8-FNS8-C
Instrumentation Manifolds
Features
General Information
Pressure vs. Temperature
◎
◎
◎
◎
◎
◎
◎
◎
◎
Maximum working pressure:
Stainless steel: up to 6000 psig (414 bar)
Alloy C-276: up to 6000 psig (414 bar)
Alloy 400: up to 5000 psig (345 bar)
Working temperature:
PTFE packing: -65 F to 450 F (-54 C to 232 C)
Graphite packing: -65 F to 1200 F (-54 C to 649 C)
Orifice: 0.157 (4.0 mm), CV: 0.35
Two-stem design: thread hardened upper stem and
smooth surface hardened lower stem
Upper stem thread lubricant isolated from system media
Linear instead of helical movement of the nonrotating lower
stem avoids galling damage to the seat and tip, as well as
reduces the total friction area between the packing and the
lower stem
Safety back seating seals in fully open position
Steady and durable fastening of the handle by double lock-pins
Leak-tight performance testing for every valve with nitrogen at
the maximum working pressure
° ° ° °
° ° ° °
"
1.
2. Contact the authorized representative or NACO Group for curve graph of other materials.
Based on graphite stem packing.
Temperature (° )C
Pre
ssu
re (
psi
g)
Pre
ssu
re (
bar)
Temperature (°F)
Alloy C-276316SS
6500
6000
5500
5000
4500
4000
3500
3000
2500
2000
1500
1000
500
0
448
414
379
345
310
276
241
207
172
138
103
69
35
0
-54 38 149 260 482 704371 593
-65 100 300 500 700 900 1100 1300
Alloy 400
Gra
phite
G
PTFE
GV
Seri
es
PTFE
GR
Seri
es
Part
Nu
mb
er
Desc
rip
tio
n
Pack
ing
Mate
rial
Han
dle
Stellit
e
Sam
eas
Bo
dy
Seal M
ate
rial
Tip
Mate
rial
GV
Seri
es
PEEK
Ace
tal
GR
Seri
es
PFA
Du
ple
x 2205
D5
Stellit
eW
Sam
e a
sB
od
y
TI
Tit
an
ium
Gr.
4A
20
Allo
y 20
INC
Allo
y 600
HC
Allo
y C
-276
1
Sam
e a
sIn
let
Speci
fy in
th
esa
me w
ay
as
inle
t ty
pe a
nd
size
M20 x
1.5
Bo
dy S
tyle
Ou
tlet
Typ
eO
utl
et
Siz
e
Ext
en
ded
Typ
eE
Min
iatu
re
Typ
eC
Stan
dard
Typ
e
P F
321 S
S
304 S
S
316 S
S
Bo
dy
Mate
rial
Inle
t Typ
e
1/2
"
83
/4"
12
20In
let
Siz
e
RT
FRT
FRP
FMS
MS
NS
FNS
Male
BSP
TFe
male
BSP
T
Fem
ale
BSP
P(f
or
RP)
Fem
ale
Metr
ic
Th
read
(f
or
RP)
Male
Metr
ic
Th
read
(fo
r R
G)
Male
NPT
Fem
ale
NPT
304L
SS
316L
SS
Du
ple
x 2205
Tit
an
ium
G
r.4
Allo
y 20
Allo
y 400
Allo
y 600
Allo
y C-2
76B
rass
Carb
on
St
eel
S1
S4
SS
Seri
es
4L
GR
Plu
g T
ip
Desi
gn
Ball T
ip
Desi
gn
GV
6L
D5
TI
A20
M INC
HC
B CS
MR O
Bla
ckA
lum
inu
mB
ar
Red
Alu
min
um
B
ar
321
Stain
less
St
eel B
ar
Bla
ck
Kn
ob
F2
FC-0
1
FC-0
2
Cle
an
ing
an
dPack
ag
ing
904L
904L
SS
Sp
eci
al
Ap
pli
cati
on
NA
CE
MR
0175
S
NO
4 Gauge Valves and Instrumentation Manifolds Gauge Valves and Instrumentation Manifolds 5
Cle
an
ing
an
d P
ack
ag
ing:
FC-0
1:
Stan
dard
cle
an
ing
an
d p
ack
ag
ing
fo
r g
en
era
l in
du
stri
al p
roce
du
res.
FC-0
2: Sp
eci
al cl
ean
ing
an
d p
ack
ag
ing
fo
r w
ett
ed
sys
tem
co
mp
on
en
ts t
o e
nsu
re c
om
plian
ce w
ith
pro
du
ct c
lean
lin
ess
req
uir
em
en
t as
state
d in
AST
M G
93 L
eve
l C
.
No
te: "Part
Nu
mb
er
Desc
rip
tio
n" is
use
d f
or
com
po
siti
on
ru
les
of
NA
CO p
rod
uct
mo
del,
No
t su
itab
le f
or
speci
fic
pro
du
ct p
art
nu
mb
er
sele
ctio
n, n
ot
ran
do
m c
om
bin
ati
on
s.
If in
do
ub
t, p
lease
co
nta
ct N
AC
O c
om
pan
y o
r au
tho
rize
d a
gen
ts.
GR
SSN
S8FN
S8C
PW
GR
SF2
- -
-
-
-
1.25"(32.0)
3.0
0"
(76
.0)
1
Valve Body Material
2
Item
3
4
5
6
7
Handle
Set Screw
Upper Stem
Packing Bolt
Lock Nut
Bonnet
Gland
Anodized aluminum
Stainless steel
8 Packing
Body
Lower StemChrome-plated316 SS/A276
316 SS/A276
Part
9
PTFE or PEEK or graphite
316 SS/A479316 SS/A182
17-4PH
316 SS/A479
316 SS
11
10
Lock Pin 304 SS/A276
304 SS/A276
Alloy R-405/B164
Alloy 400
316 SS/A276
Alloy R-405/B164
Alloy 400/B164, B127,B564
Alloy C-276
Alloy C-276/B564
Alloy C-276/B574
Alloy C-276/B574
Lubricant Molybdenum disulfide-based
2-valve Manifolds
Process
Instrument
Isolate Test/Vent
PT
Handle color codes for functions:
BLACK=Isolate/block
RED=Test/vent
GREEN=Equalize
Standard Materials of Construction
Instrument manifolds are manufactured in accordance with ANSI B31.1 and B31.3,
specifications meet MSS-SP-105. Flange design meets the requirements of MSS SP-99.
2-valve manifold is used with pressure gauges or pressure transmitters.
3-valve and 5-valve manifolds are used with differential pressure transmitters.
◎
◎
◎
Instrumentation Manifolds
Every manifold is supplied with one PTFE sealing ring for manifold-to-instrument and four
7/16" UNF x 1.75" high tensile bolts.
Consist of one block valve and one bleed valve
1.18"(30.0)
4.37"(111.0)
2.13"(54.0)
1.6
2"
(41
.2)
0.8
3"
(21
.0)
1.73"(44.0)
4 x 0.47"12.0)(
Process interface valves for sour gas service are available. Materials are selected in accordance with
NACE MR0175/ISO 15150. Contact the authorized representative or if any request.NACO Group
Basic Ordering Number Outlet/InstrumentInlet/Process Test/Vent
1/4 Female NPT1/2 Female NPT2D□□-FNS8-A Flanged
Process
Instrument
Isolate Test/Vent
PT
Every manifold is supplied with one PTFE sealing ring for manifold-to-instrument and two
7/16" UNF x 1.75" high tensile bolts.
1.25"(31.75)
2.5
0"
(63.5
)
1.18"(30.0)
2.68"(68.0)
1.6
2"
(41.2
)1.30"(33.0)
2 x12.0)(0.47"
Basic Ordering Number Outlet/InstrumentInlet/Process Test/Vent
1/4 Female NPT1/2 Female NPT2D□□ -FNS8-L Flange
6 Gauge Valves and Instrumentation Manifolds Gauge Valves and Instrumentation Manifolds 7
Every manifold is supplied with one PTFE sealing ring for manifold-to-instrument and two
7/16" UNF x 1.75" high tensile bolts.
1.25"(31.75)
Basic Ordering Number Outlet/InstrumentInlet/Process Test/Vent
1/4 Female NPT1/2 Female NPT2D□□-FNS8-H Flange
1.6
2"
(41
.2)
2.5
0"
(63
.5)
1.18"(30.0)
3.50"(88.9)
7.83"(198.7)
2 x 0.47"12.0)(
Process
Instrument
Isolate Test/Vent
PT
PT
3.81"(96.8)
1.2
5"
(32.0
)
2.4
4"
1.6
2"
(41.2
)
(62.0
)
1.88"
1.6
3"
(47.8)
(41.4
)
Basic Ordering Number
2D□□-FNS8-T
Inlet/Process Outlet/Instrument Test/Vent
2 x 0
.28"7)(
1/2 Female NPT Flange 1/4 Female NPT
Process
Instrument
Isolate
Test/Vent
Every manifold is supplied with one PTFE sealing ring for manifold-to-instrument and two
7/16" UNF x 24 mm high tensile bolts.
1
2
3
10
8
9
7
5
6
4
11
8 Gauge Valves and Instrumentation Manifolds Gauge Valves and Instrumentation Manifolds 9
1.12"(28.4)
Basic Ordering Number Outlet/InstrumentInlet/Process Test/Vent
1/4 Female NPT1/4 Female NPT2R□□-FNS4-A 1/4 Female NPT
2 x
2.32"(58.9)
2.0
0"
(50.8
)
0.28"7.0)
1.1
5"
(29.3
)
0.53"(13.5)
1.38"(35.0)
(
Instrument
Isolate
Process
Test/Vent
PT
1.12"(28.4)
2.00"(50.8)
2.3
2"
(58.9
)
1.06 "(26.9)
0.28"
0.87"(22.0)
( 7.0)
Basic Ordering Number Outlet/InstrumentInlet/Process Test/Vent
1/4 Female NPT1/4 Female NPT2R□□ -FNS4-C 1/4 Female NPT
Process
Instrument
Isolate Test/Vent
PT
2.3
2"
(58
.9)
1.12"(28.4)
2 x1.38"(35.0)
1.9
3"
(49
.0)0.34"
( 8.5)
2.00"(50.8)
Basic Ordering Number Outlet/InstrumentInlet/Process Test/Vent
1/4 Female NPT1/2 Female NPT2R□□ -FNS8-L 1/2 Female NPT
Process
Instrument
IsolateTest/Vent
PT
Basic Ordering Number Outlet/InstrumentInlet/Process Test/Vent
1/4 Female NPT1/2 Female NPT2R□□-FNS8-NS8-H 1/2 Male NPT
1/4 Female NPT1/2 Male NPT2R□□-NS8-H 1/2 Male NPT
1.25"(31.75)
4.6
3"
(11
7.6
)
1.25"(31.75)
Process
Instrument
Isolate
Test/VentPT
Basic Ordering Number Outlet/InstrumentInlet/Process Test/Vent
1/4 Female NPT1/2 Female NPT2R□□-FNS8-V 1/2 Female NPT
2 x
2.07"(52.5)
1.9
7"
(50.0
)
0.24"( 6.0)
2.4
4"
(62
.0)
1.08"(27.5)
Process
Instrument
IsolateTest/Vent
PT
Every manifold is supplied with one PTFE sealing ring for manifold-to-instrument and two
7/16" UNF x 1.75" high tensile bolts.
(31.75)1.25"
Basic Ordering Number Outlet/InstrumentInlet/Process Test/Vent
1/4 Female NPTFlange2D□□-F-H Flange
1.00"(25.4)
1.6
2"
(41.2
)1.18"(30.0)
3.50"(88.9)
7.83"(198.7)
2 x 0.47"12.0)(
Process
Instrument
Isolate Test/Vent
PT
3-valve Manifolds
1.25"(32.0)
3.0
0"
(76
.0)
Consist of two block valves and one equalizer valve
Every manifold is supplied with two PTFE sealing rings manifold-to-instrument and four
7/16" UNF x 1.75" high tensile bolts.
Every manifold is supplied with two PTFE sealing rings for manifold-to- instrument and four
7/16" UNF x 1.75" high tensile bolts.
Basic Ordering Number Outlet/InstrumentInlet/Process
3D□□-FNS8-A Flange
4 x
0.8
3"
(21.0
)
1.18"(30.0)2.13"(54.0)
4.33"(110.0)
5.60"(142.0)
0.47"( 12.0)
1.6
2"
(41.2
)
10 Gauge Valves and Instrumentation Manifolds Gauge Valves and Instrumentation Manifolds 11
Isolate Isolate
Process
Instrument
Equalize
DP
Plug Plug
Isolate Isolate
Process
Instrument
Equalize
DP
Basic Ordering Number Outlet/InstrumentInlet/Process Test/Vent
OptionalFlange3D□□-FNS8-L
1/2 Female NPT
1/2 Female NPT
1.25"(32.0)
2.5
2"
(64
.0)
4 x
1.18"(30.0)
2.13"(54.0)
3.74"(95.0)
1.38"(35.0)
1.6
2"
(41
.2)
0.47"( 12.0)
Basic Ordering Number
3D□□-FNS8-T
Inlet/Process Outlet/Instrument
DP
Every manifold is supplied with two PTFE sealing ring for manifold-to-instrument and four
7/16" UNF x 24 mm high tensile bolts.
Basic Ordering Number
3D□□-F-I
Inlet/Process Outlet/Instrument
1/2 Female NPT Flanged
Isolate
Process Instrument
Isolate
Flanged Flanged
Every manifold is supplied with two PTFE sealing ring for manifold-to-instrument and four
7/16" UNF x 24 mm high tensile bolts.
Equalize
Test/Vent
Optional
Test/Vent
Optional
2.40
1.25"
3.3
8"
2.1
3"
3 74".(95.0)
(54
)
1.1
4"
(86
)
(61)
(29
)
1.62"(41.2)
(32.0)
2 x 0.28"7)(
2 x 0.28"
7)(
2.4
4"
(62.0
)
1.6
2"
(41.2
) 3.3
8"
2.1
3"
(54)
(86)
2 1/4 NPT×
1.1
4"
(29)
3.74"(95)
4 7/16 20 UNF× -
2.1
3"
(54)
12 Gauge Valves and Instrumentation Manifolds Gauge Valves and Instrumentation Manifolds 13
Basic Ordering Number Outlet/InstrumentInlet/Process Test/Vent
Optional1/2 Female NPT3R□□-FNS8-V 1/2 Female NPT
Optional3R□□-FL8-V 1/2'' 1/2''
1.20"(30.5)
2.5
0"
(63
.5)
0.28"( 7.0)
2.13"(54.0)
3.50"(88.9)
0.6
3"
(16
.0)
0.69"(17.5)
2 x
Equalize
Instrument
Process
Isolate
DP
Isolate
PlugPlug
5-valve Manifolds
1.25"(32.0)
3.0
0"
(76
.0)
Double-bleed Function of 5-valve Manifold
Consist of two block valves, two bleed valves, and one equalizer valve
Every manifold is supplied with two PTFE sealing rings for manifold-to-instrument and four
7/16" UNF x 1.75" high tensile bolts.
4 x
1.6
2"
(41
.2)
1.18"(30.0)
2.95"(75.0)4.33"
(110.0)5.60"
(142.0)
2.13"(54.0)
( 12.0) 0.7
5"
(19
.0)
0.47"
Basic Ordering Number Outlet/InstrumentInlet/Process Test/Vent
1/4 Female NPT1/2 Female NPT5D□□-FNS8-A Flange
1/4 Female NPT5D□□-FL8-A Flange
Test/Vent
Process
Isolate
Equalize
Instrument
Test/Vent
DP
1/2''
5D□□-FNS8-F
Every manifold is supplied with two PTFE sealing ring for manifold-to-instrument and four
7/16" UNF x 24 mm high tensile bolts.
1.6
2"
(41
.2)
1.2
5"
2.4
4"
(62
.0)
(32
.0)
3.3
8"
2.1
3"
(54
)
2.1
3"
(54
)
(85
.9)
4.48"(114)
1.1
4"
(29
)
Basic Ordering Number Inlet/Process Outlet/Instrument
2 x 0 .28"7)(
DP
Test/Vent
1/2 Female NPT Flange 1/4 Female NPT
Test/Vent
Test/Vent
Isolate
IsolateInstrument Equalize Process
3.0
0"
(76.0
)
1.25"(32.0)
5.60"(142.0)
4.33"(110.0)
2.95"(75.0)
2.13"(54.0)
1.18"(30.0)
Basic Ordering Number Outlet/InstrumentInlet/Process Test/Vent
1/4 Female NPT1/2 Female NPT5R□□ -FNS8-L 1/2 Female NPT
1/4 Female NPT5R□□ -FL8-FNS8-L 1/2 Female NPT
Test/Vent
Instrument
Equalize
Isolate
Process
Test/Vent
DP
1/2''
14 Gauge Valves and Instrumentation Manifolds Gauge Valves and Instrumentation Manifolds 15
Basic Ordering Number Outlet/InstrumentInlet/Process Vent
1/4 Female NPT1/2 Female NPT5R□□ -FNS8-B 1/2 Female NPT
1/4 Female NPT5R□□-FL8-FNS8-B 1/2 Female NPT
Test
Optional
Optional
1.25"(32.0)
3.0
0"
(76
.0)
4.33"(110.0)5.60"
(142.0)
2.13"(54.0)
Plug
Instrument
Equalize Equalize
Vent ProcessProcess
Isolate Isolate
Plug
DP
5-
Consist of two block valves, one bleed valve, and two equalizer valves
valve Custody Transfer/Fiscal Metering Manifold
Every manifold is supplied with two PTFE sealing rings for manifold-to-instrument and four 7/16" UNF x 1.75"
high tensile bolts.
Basic Ordering Number Outlet/InstrumentInlet/Process Vent
1/4 Female NPT1/2 Female NPT5D□□ -FNS8-B Flanged
1/4 Female NPT5D□□-FL8-B Flanged
Test
Optional
Optional
4 x
4.33"(110.0)5.60"
(142.0)
2.13"(54.0)
1.6
2"
(41.2
)
0.47"( 12.0)
0.7
5"
(19.0
)
Plug
Instrument
Equalize Equalize
Vent ProcessProcess
Isolate Isolate
Plug
DP
1.25"(32.0)
3.0
0"
(76
.0)
1/2''
1/2''
5D□□ B-FNS8-T
Basic Ordering Number Inlet/Process Outlet/Instrument Test
1/2 Female NPT Flange Optional
Every manifold is supplied with two PTFE sealing ring for manifold-to-instrument and four
7/16" UNF x 24 mm high tensile bolts.
DP
Plug
Plug
Isolate
Isolate
Equalize
Equalize
Process
Vent
Instrument 2 x 0.28"
7)(
3.3
8"
2.1
3"
(54)
(85.9
)
2.1
3"
(54)
1.1
4"
(29)
1.6
2"
(41.2
)
2.4
4"
(62.0
)
4.48"(114)
1/4 NPT Vent
Vent
1/4 Female NPT
5D□□-F-I
Basic Ordering Number Outlet/InstrumentInlet/Process Test
Flanged Flanged Optional
Every manifold is supplied with two PTFE sealing ring for manifold-to-instrument and four
7/16" UNF x 24 mm high tensile bolts.
DP
Plug
Plug
Instrument
Isolate
Isolate
Equalize
Equalize
VentProcess
2.4
4"
(62
.0)
1.6
2"
(41
.2)
4 7/16-20 UNF×
1/4 NPT Vent
3.3
8"
2.1
3"
(54)
(86)
1.1
4"
(29
)
3.74"(95)
2×1/4 NPT
2 x 0.28"7)(
2.1
3"
(54)
Vent
1/4 Female NPT
16 Gauge Valves and Instrumentation Manifolds Gauge Valves and Instrumentation Manifolds 17
SS-M2P-6BK
1. The integral assembly including: bracket, U-bolts,
bolts, gaskets, nuts
2. Used to fix 2D□□-XX-C, 3D□□-XX-C,
5D□□-XX-C
1.00"(25.4)
2.74"(69.5)
4.13"(105.0)
2.7
6"
(70.0
)
4.1
7"
(106.0
)
SS-M2P-8BK
1. Install support design is available for horizontal or vertical installation
2. The integral assembly including: bracket, U-bolts, bolts, gaskets, nuts
3. Used to fix 2D□□-XX-A, 2D□□-XX-L, 2D□□-XX-H,
2D□□-XX-V, 3D□□-XX-A, 3D□□-XX-L, 5D□□-XX-A, 5D□□-XX-B
6.5"(165.0)
4.4
5"
1.18"(30)
0.79"(20.0)
0.7
9"
(20.0
)
1.1
8"
(30)
(113.0
)
Manifold Bracket Supports
SS-M2P-2BK
1. The integral assembly including: bracket, U-bolts, bolts,
gaskets, nuts
2. Used to fix 2R□□-XX-A, 2R□□-XX-C, 2R□□-XX-L
1. Install support design is available for horizontal or vertical installation
2. The integral assembly including: bracket, U-bolts, bolts, gaskets, nuts
SS-M2P-4BK
3. Used to fix 2D -XX-A, 2D -XX-L, 2D -XX-H,
3D□□-XX-A, 3D□□-XX-L, 5D□□-XX-A, 5D□□-XX-B, 5R□□-XX-L,
5R□□-XX-B
□□ □□ □□
For more installation information regarding other manifolds, please contact the authorized representative or .NACO Group
5.7
1"
(14
5.0
)
0.39"(10.0)
2.7
4"
(69
.5)
1.5
4"
(39
.0)
2.74"(69.5)
3.54"
(90.0)
1.1
8"
(30
.0)
1.8
5"
(47
.0)
3.54"(90.0)2.74"(69.5)
2-valve Manifold
3-valve Manifold
5-valve Manifold
Basic Ordering Number Outlet/InstrumentInlet/Process Test/Vent
1/4 Female NPT1/2 Female NPT5D□□ -FNS8-C Flange
1/4 Female NPT5D□□-FL8-C Flange
Instrument
Test/Vent
Equalize
Isolate
Process
Test/Vent
C Integral Manifold is specifically designed for the pressure transmitters of Rosemount®coplanar™, including Model 3051C,
3051P, 2024 and 3095.
Each of the following manifold contains four 7/16" UNF x 1.75" high tensile bolts.
It can assemble directly to transmitters,eliminating need for flange.
C Integral Manifolds
Basic Ordering Number Outlet/InstrumentInlet/Process Test/Vent
1/4 Female NPT1/2 Female NPT2D□□ -FNS8-C Flanged
4 x
1.18"(30.0)
1.30"(33.0)
2.13"(54.0)
5.60"(142.0)
3.35"(85.0)
( 12.0)
4.02"102.0
1.6
2"
(41
.2)
0.47"
3.0
0"
(76.0
)
1.25"(32.0)
1.25"(32.0)
3.0
0"
(76.0
)Process
Instrument
Isolate Test/Vent
PT
Plug plug
Isolate Isolate
Process
Instrument
Equalize
DP
DP
4 x
3.35"(85.0)5.60"
(142.0)
2.13"(54.0)
( 12.0)
1.30"(33.0)
1.18"(30.0)
0.47" 1.6
2"
(41.2
)
Basic Ordering Number Outlet/InstrumentInlet/Process Test/Vent
Optional1/2 Female NPT3D□□ -FNS8-C Flange
Optional3D□□-FL8-C Flange1/2''
1/2''
4 x 0.47"( 12.0)
(76.0
)
4.37"(110.0)
3.35"(85.1)
1.18"(30.0)
3.0
0"
2.13"(54.0)
1.6
2"
(41.2
)
18 Gauge Valves and Instrumentation Manifolds Gauge Valves and Instrumentation Manifolds 19
Part
Nu
mb
er
Desc
rip
tio
n
Rem
ote
M
ou
nt
R
Dir
ect
M
ou
nt
DN
o
YY
es
typ
e:
Flan
ged
D
Speci
fied
in
th
e s
am
e w
ay
as
the in
let
typ
e a
nd
siz
e
Rty
pe:
Sam
e a
s In
let
2-v
alv
e
532
3-v
alv
e
5-v
alv
e
1/4
N
PT w
ith
R
elief
Valv
e
Fem
ale
T
No
P1/4
N
PT w
ith
Plu
gFem
ale
M
20 x
1.5
1/4
"
3/4
"
1/ 2
"
20
1284
Man
ifo
ldS
eri
es
Mo
un
tin
g
Bra
cket
Ou
tlet
Typ
eO
utl
et
Siz
eTest
Po
rts
& P
lug
sB
od
y S
tyle
Pack
ing
Sealin
gM
ate
rial
Inle
t Siz
eIn
let
Typ
eB
od
y
Mate
rial
Mo
un
t Typ
e
Gra
ph
ite
G
PTFE
A VCB L H
An
gle
Patt
ern
Co
mp
act
Patt
ern
Do
ub
le
eq
ualize
Fun
ctio
n
Valv
es
Vert
ically
Mo
un
ted
Valv
es
Ho
rizo
nta
lly
Mo
un
ted
Valv
es
In-L
ine
Mo
un
ted
FMS
FRT
FNS
F
Fem
ale
M
etr
ic
Th
read
(f
or
RP)
Fem
ale
BSP
T
Fem
ale
NPT
Flan
ged
SS
6L
S4
4L
M INC
BD5
TI
HC
S1
A20
CS
904L
316 S
S
316L
SS
304 S
S
304L
SS
Tit
an
ium
G
r.4
Allo
y 400
Allo
y 600
Bra
ss
Du
ple
2205
321 S
S
Allo
y 20
Carb
on
St
eel
904L
SS
Cle
an
ing
an
dPack
ag
ing
Sp
eci
al
Ap
plica
tio
n
F2
FC-0
1
FC-0
2N
AC
E
MR
0175
S
NO
7/1
6 - 2
0
UN
F x
1.7
5
" 7/1
6
- 2
0
UN
Fx
3
"1 2
M1
0 x
40
mm
3M
12
x 4
0 m
m
2.1
3(5
4 m
m)
"
56
2.1
9(5
5.6
mm
)"
57
2.2
5(5
7.2
mm
)"
Flan
ge
Fast
en
ers
For
dir
ect
mo
un
t o
nly
Flan
ge O
utl
et
Cen
terl
ine
Bo
lt
Mate
rial
M
Zin
c P
late
d
Ca
rbo
n S
tee
l
31
6 S
S
Features
Accessories
Kidney Flange
Kidney Flange and Eccentric Flange
Ordering Information
◎
◎◎
Working temperature
PTFE:
Graphite: -65 F to 1000 F (-54 C to 538 C)
Integral forged body
Standard material: A182 F316
:
-65 F to 450 F (-54 C to 232 C)° ° ° °
° ° ° °
A kidney flange set contains a PTFE flange seal ring and two
7/16 - 20 UNF high tensile bolts.
The Selection of Flange Seal Materials
The standard flange seal material is PTFE, graphite is an option. To order graphite flange seal material, add - G as a suffix.
Eccentric Flange
Ordering Information
The process connection type of transmitter can be transformed to other connection types.
SS-KF-PB8
SS-KF-FL8
2.10 (53.3)
2.48 (63)
1.10 (28)
1.10 (28)
SS-KF-FNS8
SS-KF-FNS4
Basic Ordering
Number
Connection Type
and SizeA
Dimensionin. (mm)
1.10"(28)
1.31"(33.3)
2.4
5"
(62.2
)
A
1.31"(33.3)
2.4
5"
(62.2
)
0.06"
(1.6)
1.10"(28)
A
1/2 PB
1/2 Female NPT
1/4 Female NPT
1/2''
1. Eccentric flange needs to be ordered in whole set.
2. A whole eccentric flange set contains two eccentric
flanges, two PTFE flange seal rings and four 7/16 - 20
UNF high tensile bolts.
SS- -PB8EF
SS- -FL8EF
SS- -FNS8EF
SS-EF-FNS4
Basic Ordering
Number
Connection Type
and Size
2.10 (53.3)
2.48 (63)
1.10 (28)
1.10 (28)
Dimensionin. (mm)
1/2 PB
1/2 Female NPT
1/4 Female NPT
1/2''
A
1.
Cen
ter
lin
e d
ista
nce
of
2.1
88
(55.6
mm
) is
su
itab
le f
or
ran
ge 6
an
d 7
, 1151 s
eri
es
tran
smit
ter.
Cen
ter
lin
e d
ista
nce
of
2.2
50
(57.2
mm
) is
su
itab
le f
or
ran
ge 8
, 1151 s
eri
es
tran
smit
ter.
tran
smit
ters
un
der
main
bra
nd
s,
2. Th
e s
tan
dard
co
nfi
gu
rati
on
of
dir
ect
mo
un
tin
g m
an
ifo
ld c
on
tain
s PTFE
fla
ng
e s
eal ri
ng
an
d 7
/16-2
0 U
NF
X 1
.75" h
igh
ten
sile
bo
lts,
can
be c
on
nect
ed
wit
h
such
as
EJA
, H
on
eyw
ell, Fo
xbo
ro 8
43 d
/p, an
d R
ose
mo
un
t®151, 2024, 3051H
seri
es.
3. 7/1
6-2
0 U
NF
x 3" h
igh
ten
sile
bo
lts
can
be s
up
plied
, ca
n b
e u
sed
fo
r R
ose
mo
un
t®3051C
tra
nsm
itte
r w
ith
pro
cess
fla
ng
e a
nd
co
pla
nar
mo
un
tin
g m
an
ifo
ld.
Th
e s
tan
dard
cen
ter
lin
e d
ista
nce
of
dir
ect
mo
un
tin
g f
lan
ge o
utl
et
of
3-v
alv
e m
an
ifo
ld a
nd
5-v
alv
e m
an
ifo
ld is
2.1
3(5
4 m
m).
"
" "
FC-0
1: St
an
dard
cle
an
ing
an
d p
ack
ag
ing
fo
r g
en
era
l in
du
stri
al p
roce
du
res.
4. C
lean
ing
an
d P
ack
ag
ing:
FC-0
2: Sp
eci
al cl
ean
ing
an
d p
ack
ag
ing
fo
r w
ett
ed
sys
tem
co
mp
on
en
ts t
o e
nsu
re c
om
plian
ce w
ith
pro
du
ct c
lean
lin
ess
req
uir
em
en
t as
state
d in
AST
M G
93 L
eve
l C
.
No
te: "Part
Nu
mb
er
Desc
rip
tio
n" is
use
d f
or
com
po
siti
on
ru
les
of
NA
CO p
rod
uct
mo
del,
No
t su
itab
le f
or
speci
fic
pro
du
ct p
art
nu
mb
er
sele
ctio
n, n
ot
ran
do
m c
om
bin
ati
on
s.
If in
do
ub
t, p
lease
co
nta
ct N
AC
O c
om
pan
y o
r au
tho
rize
d a
gen
ts.
3D
SSFN
S8TY
1M
SF2
- -
LG
-
-
Allo
y
C-2
76
The auxiliary installation for manifolds and transmitters of different brands
Model of Transmitters
Model of FITOK Manifolds
3051 CD X X 2 (3, 4, 5, 7, 8) X X X X
3051 CD X X 0 X X X X H2 (H3, H4, H7, HJ)
A4
A1
A2
A3
A5
Rosemount Transmitters
3051 CD X X 0 X X X X HK
3051 CG (CA) X X 2 (3, 4, 5, 7, 8) X X X X
3051 CG (CA) X X 0 X X X X H2 (H3, H4, H7, HJ)
3051 CG (CA) X X 0 X X X X HK
3051 CG (CA) X X 0 X X X X HL
3051 CG (CA) X X 0 X X X X DF
1151 D (H) P 3 (4, 5) X XX XX
1151 A (G) P 3 (4, 5) X XX XX
1151 D (H) P X X XX XX DF
3051 CD X X 0 X X X X HL
3051 CD X X 0 X X X X DF
A1
A5
A1
A5
A
A
A
A1
A5
EJA Transmitters
EJA1X0A-XXX0 (5) X-XXXX
EJA1X0A-XXX1 (2, 3, 4) X-XXXX
EJA3 (4, 5) (5)X-XXXXX0A-XXX0
EJA3 (4, 5) (2,3,4)X-XXXXX0A-XXX1
Honeywell Transmitters
STDXXX-XXA-XXX
STDXXX-XXH-XXX
STXXXX-XXG-XXX
STGXXX-XXA-XXX
SMXXXX-XXA-XXX
SMXXXX-XXH-XXX
SIEMENS Transmitters
7MF433X-XXX0 (4) X-XXXX
7MF433X-XXX2 (6) X-XXXX
7MF44 (5) 3X-XXX0 (4) X-XXXX
7MF44 (5) 3X-XXX2 (3, 6, 7) X-XXXX
7MF44 (5) 3X-XXX1 (5) X-XXXX
A1
A5
A1
A2
A3
A
A
A1
A2 A
A
A1
A5
A
A1
A5
A1
A5
A3
A2
A1
A4
A
3(5)DXX-XX-X 3(5)RXX-FXXX-X 2DXX-XXX-X 2RXX-FXXX-X
A
A: Connecting with fittingsA1: Connecting with flange and sealing rings, using 7/16 - 20 UNF x 1.75" boltsA2: Connecting with flange and sealing rings, using M10 x 40 mm boltsA3: Connecting with flange and sealing rings, using M12 x 40 mm boltsA4: Connecting with flange and sealing rings, using 7/16 - 20 UNF x 3" boltsA5: Remove the kidney flanges and then connect with flange and sealing rings
20 Gauge Valves and Instrumentation Manifolds Gauge Valves and Instrumentation Manifolds 21
Various Combinations of Eccentric Flange Set
(50.8)
2.13"(54)
2.00" 2.13"(54)
2.13"(54)
2.25"(57.2)
2.13"(54.0)
Combinations of eccentric flange set can give different center line distances of 2.0" (50.8 mm), 2.13" (54 mm) and 2.25" (57 mm).
◎
◎
RB series RBSS-NS4 Bleed Valve is used as
standard test/vent valve.
For more information, refer to NACO Bleed
Valve RB series.
Relief Valve
Chrome-plated Stem
and Tip Extend Cycle Life.
Calibration Fitting
The calibration fittings can be connected directly with the bleed
port of transmitter so that the calibration process can be simplified.
For more information, refer to NACO Calibration Fitting.
◎
◎