gazette - tomax · 2 tco applications commonwealth of australia gazette no tc18/43, wednesday, 07...
TRANSCRIPT
Commonwealth of Australia Gazette
No. TC18/43, Wednesday, 7 November 2018 Published by the Commonwealth of Australia
TARIFF CONCESSIONS
CONTENTS
TCO Applications ....................................................................................................... 2
TCOs Made.................................................................................................................. 7
Local Manufacturer Initiated - TCOs Revoked ........................................................ 9
Intention to Revoke TCOs not used in over 2 years ............................................. 10
TCOs Revoked - Unused for over 2 years ............................................................. 13
Comptroller-General of Customs Review of TCO Revocations Results ............ 16
The Commonwealth of Australia Tariff Concessions Gazette (the Tariff Concessions Gazette) is free of charge on
the Department of Home Affairs internet site at: https://www.homeaffairs.gov.au/busi/domestic-manufacturers-and-importers
The Tariff Concessions Administration Section is located at 5 Constitution Ave Canberra City 2601 Contact details: General Email Inquiries:………………………………[email protected] General Inquiries: (02) 6229 3567 TAPIN help desk: (02) 6275 6534
Cat. No.
ISSN 0813-8389
©Commonwealth of Australia, 2018
2 TCO Applications Commonwealth of Australia Gazette
No TC18/43, Wednesday, 07 Nov 2018
TCO Applications
CUSTOMS ACT 1901 - NOTICE PURSUANT TO SECTION 269K(1) - APPLICATIONS MADE FOR TARIFF CONCESSION ORDERS
Applications have been lodged for Tariff Concession Orders for the goods described in the following TABLE.
Australian manufacturers who wish to contest the granting of a Tariff Concession Order for the goods described
are invited to lodge a submission in writing in an approved form. Submissions must be lodged within 50 days of
the date of publication of this Notice.
The operative date (Op.) and TC reference number follow the description of goods.
To assist local manufacturers, the use(s) to which the goods can be put follow the description of goods.
Objections to the making of TCO submission forms are available at
https://www.homeaffairs.gov.au/Forms/Documents/b444.pdf
Contact: Email [email protected]
THE TABLE
Description of Goods including the Schedule 4 Item Number
Customs Tariff Classification General Duty Rate
3926.90.90 KEY SHELLS
Op. 12.10.18 - TC 18209070
Stated Use:
To allow different chip types to fit into a single shell which
is clipped into different keyblank blades
Applicant: DAVCOR GROUP PTY LTD
50
5%
5603.14.00 TAPE, having BOTH of the following:
(a) synthetic non-woven base carrier fabric;
(b) impregnated with petrolatum,
with OR without ANY of the following:
(i) siliceous AND mineral fillers;
(ii) fire retardants AND thermal extenders AND adhesives;
(iii) HDPE backing
Op. 24.10.18 - TC 18216029
Stated Use:
Corrosion protection, sealing and waterproofing of metal and
other surfaces above and underground, particularly pipelines,
pipeline joints, fittings, cables, structural metal products and
marine jetty or pier pylons
Applicant: DENSO (AUSTRALIA) PTY LTD
50
5%
8206.00.00 SETS, TIMING TOOLS, comprising ALL of the following:
(a) hand tools;
(b) fittings;
(c) gauges;
(d) plastic box
Op. 23.10.18 - TC 18215277
Stated Use:
Change timing chains or belts on vehicle engines
Applicant: TRIDON AUSTRALIA PTY LTD
50
5%
3 TCO Applications Commonwealth of Australia Gazette
No TC18/43, Wednesday, 07 Nov 2018
Description of Goods including the Schedule 4 Item Number
Customs Tariff Classification General Duty Rate
8302.41.00 LOCKS, electronic, cylindrical latch
Op. 23.10.18 - TC 18215275
Stated Use:
Locks for accommodation industry
Applicant: VINTECH SYSTEMS PTY LTD
50
5%
8402.19.00 BIOMASS BOILERS, HEATING FLUID, thermal power NOT less than
350 kW and NOT greater than 30 000 kW, having two OR more of the
following:
(a) chimney;
(b) chutes;
(c) conveyor;
(d) surge bin;
(e) filters;
(f) controls;
(g) gears;
(h) motors;
(i) fans
Op. 05.10.18 - TC 18205559
Stated Use:
Create thermal energy and for the co-generation of electricity
through the use of steam
Applicant: ACT GROUP (AUST) PTY LTD
50
5%
8412.90.90 PARTS, MUD MOTOR, hydraulic, being ANY of the following:
(a) adjusting rings;
(b) eccentric stabilisers;
(c) insulating discs;
(d) lower cross over subs;
(e) lower pressure sleeves;
(f) offset housings;
(g) pickup subs;
(h) ported end caps;
(i) rotors;
(j) rotor catchers;
(k) stabiliser pads;
(l) stabiliser shims;
(m) stators;
(n) stator housing adaptors;
(o) upper pressure sleeves
Op. 23.10.18 - TC 18214797
Stated Use:
Parts of drilling motor in down hole operations
Applicant: HALLIBURTON AUSTRALIA PTY LTD
50
5%
8427.10.00 LIFT VEHICLES, LASER GUIDED, driverless, computer AND/OR
programmable logic controlled, having ALL of the following:
(a) lift height NOT greater than 10 m;
(b) lifting capacity NOT greater than 1 300 kg,
with OR without ANY of the following:
(i) battery charger stations;
(ii) batteries
Op. 15.10.18 - TC 18209073
Stated Use:
Automated laser guided storage, movement and retrieval of
products
Applicant: NESTLE AUSTRALIA LTD
50
5%
4 TCO Applications Commonwealth of Australia Gazette
No TC18/43, Wednesday, 07 Nov 2018
Description of Goods including the Schedule 4 Item Number
Customs Tariff Classification General Duty Rate
8428.90.00 REINFORCEMENT HANDLING AND PREPARATION MACHINES, CONCRETE PANEL,
being ANY of the following:
(a) cross bar manipulators;
(b) cross bar storage magazines
Op. 18.10.18 - TC 18211770
Stated Use:
Preparation and handling of steel mesh reinforcement into
concrete moulds for the manufacture of steel reinforced
concrete panels
Applicant: CSR BUILDING PRODUCTS LTD
50
5%
8430.41.00 DRILLING RIGS, UNDERGROUND, hydraulic, with OR without rod
handlers OR loaders OR presenters, having BOTH of the following:
(a) wheel mounted;
(c) rotary drill
Op. 03.10.18 - TC 18204255
Stated Use:
Used for underground drilling
Applicant: BOART LONGYEAR AUSTRALIA PTY LTD
50
5%
8430.41.00 SURFACE DRILLING RIGS, hydraulic, track AND/OR skid mountable,
having a rotary drill with OR without ANY of the following:
(i) rod handlers;
(ii) loaders;
(iii) presenters
Op. 15.10.18 - TC 18209367
Stated Use:
For surface drilling
Applicant: BOART LONGYEAR AUSTRALIA PTY LTD
50
5%
8431.49.90 PARTS, MOBILE CRANE, LATTICE BOOM, assembled OR unassembled,
complying to European Standard EN 13000:2010+A1, being one OR
more of the following:
(a) pivot sections having winches AND/OR hydraulic cylinders;
(b) adapter head sections having pulleys AND/OR guy rods;
(c) head sections having pulleys AND/OR guy rods;
(d) reducing section having guy rods;
(e) counterweight frames with OR without ballast plates;
(f) assembly units with pulleys AND/OR hydraulic cylinders;
(g) adapter sections with pulleys;
(h) boom nose with pulleys
Op. 08.10.18 - TC 18205569
Stated Use:
Dedicated parts for lattice boom cranes, used in applications
where large and excessively heavy items must be raised
Applicant: LIEBHERR-AUSTRALIA PTY LTD
50
5%
5 TCO Applications Commonwealth of Australia Gazette
No TC18/43, Wednesday, 07 Nov 2018
Description of Goods including the Schedule 4 Item Number
Customs Tariff Classification General Duty Rate
8467.21.00 DRILLS, HAND HELD, with OR without ANY of the following:
(a) belt clips;
(b) batteries;
(c) battery charger;
(d) drill bits;
(e) drill bit holders;
(f) carry cases;
(g) chuck keys;
(h) covers;
(i) depth rods AND/OR depth gauges;
(j) drill chucks;
(k) grease;
(l) hand grips;
(m) grip assembly, consisting of ALL of the following:
(i) grip base;
(ii) metal circular band;
(iii) hand grip;
(iv) hexagonal bolts,
(n) hooks;
(o) key holders;
(p) side handles;
(q) hex wrench OR allen key
Op. 12.10.18 - TC 18209067
Stated Use:
Hand held battery and A/C powered drills for drilling holes and
tightening screws, nuts and bolts
Applicant: MAKITA (AUSTRALIA) PTY LTD
50
5%
8479.89.90 POSITIONING MOUNTS, SIGNAL RECEPTION AND/OR TRANSMISSION,
including ALL of the following:
(a) mounting plate;
(b) vertical adjustment NOT less than 85 degrees;
(c) horizontal adjustment NOT less than 170 degrees;
(d) electric motor,
with OR without EITHER of the following:
(i) analogue controller;
(ii) network connectivity
Op. 10.10.18 - TC 18207230
Stated Use:
For positioning antennae during the tracking of high altitude
aircraft at ground control stations.
Applicant: AIRBUS AUSTRALIA PACIFIC LTD
50
5%
8479.89.90 REINFORCEMENT HANDLING AND PREPARATION MACHINES, CONCRETE PANEL,
being ANY of the following:
(a) needle brushing unit;
(b) needle locking AND unlocking mechanism
Op. 18.10.18 - TC 18211772
Stated Use:
Preparation and handling of steel mesh reinforcement into
concrete moulds for the manufacture of steel reinforced concrete
panels
Applicant: CSR BUILDING PRODUCTS LTD
50
5%
8504.50.90 INDUCTORS, AIR CORE, having BOTH of the following:
(a) winding with centre tap;
(b) housing
Op. 16.10.18 - TC 18210918
Stated Use:
Balance the traction current within a railway track circuit
for vehicle detection
Applicant: ANSALDO STS AUSTRALIA PTY LTD
50
5%
6 TCO Applications Commonwealth of Australia Gazette
No TC18/43, Wednesday, 07 Nov 2018
Description of Goods including the Schedule 4 Item Number
Customs Tariff Classification General Duty Rate
8526.92.00 GROUND CONTROL STATION, AIRCRAFT, mobile, radio remote
controlled, including ALL of the following:
(a) portable flight case;
(b) pilot operating unit;
(c) engineer operating unit;
(d) antenna;
(e) racks
Op. 10.10.18 - TC 18207609
Stated Use:
To communicate with the aircraft during in-hanger testing and
during pre-flight tests and control and fly the low level test
article
Applicant: AIRBUS AUSTRALIA PACIFIC LTD
50
3.75%
8906.90.10 BOATS, STERN DRIVE, unmanned surface, having BOTH of the
following:
(a) remotely controlled;
(b) speed NOT greater than 40 knots
Op. 18.10.18 - TC 18212101
Stated Use:
Used as live target for military training
Applicant: DEPARTMENT OF DEFENCE
50
5%
9503.00.70 SETS, TOY CONSTRUCTION, consisting of BOTH of the following:
(a) building blocks;
(b) printed instructions,
with OR without ANY one OR more of the following:
(i) batteries AND/OR power supply;
(ii) electric motors;
(iii) lights;
(iv) processors;
(v) electrical cords AND/OR connectors;
(vi) stickers;
(vii) human AND/OR animal figurines;
(viii) sensors;
(ix) programmable control centre AND power station;
(x) remote infrared controllers;
(xi) tracks AND/OR wheels;
(xii) assembly tools;
(xiii) helmets;
(xiv) fairy AND/OR fantasy AND/OR mythical figurines;
(xv) textile OR plastic sails;
(xvi) energy meters;
(xvii) scale model tools AND/OR machines;
(xviii) scale model cartoon AND/OR movie characters;
(xix) scale model boats AND/OR vehicles AND/OR aircraft;
(xx) plastic connectors AND/OR gears
Op. 08.10.18 - TC 18205562
Stated Use:
Construction kits for children
Applicant: LEGO AUSTRALIA PTY LTD
50
5%
7 TCOs Made Commonwealth of Australia Gazette
No TC18/43, Wednesday, 07 Nov 2018
TCOs M ade
CUSTOMS ACT 1901 - NOTICE PURSUANT TO SECTION 269R(1) - TARIFF CONCESSION ORDERS MADE
Tariff Concession Orders have been made for the goods described in the following TABLE.
The operative date (Op.) and TC reference No. follow the description of goods. Local manufacturers of
substitutable goods may request the revocation of TCOs at any time.
THE TABLE
Description of Goods including the Schedule 4 Item Number
Customs Tariff Classification Last Date of Effect
3808.94.00 WIPES AND/OR SPONGES AND/OR SWABS, ANTISEPTIC, having ALL of the
following:
(a) chlorhexidine gluconate NOT less than 2% and NOT greater
than 2.5% weight per volume;
(b) isopropyl alcohol NOT less than 70% and NOT greater than
71% volume per volume;
(c) clear OR tinted solution NOT less than 1.6 ml and NOT
greater than 97 ml
Op. 13.08.18 Dec. date 30.10.18 - TC 18175482
50
3917.29.00 JACKING PIPES, centrifugally cast glass fibre reinforced
plastic, with OR without couplings OR seals, having an outside
diameter NOT less than 2 999 mm
Op. 03.08.18 Dec. date 02.11.18 - TC 18169956
50
7326.90.90 TUBING AND/OR PIPING, liquid circulation, including BOTH of the
following:
(a) stainless steel pipes AND/OR tubes;
(b) nozzles
Op. 01.08.18 Dec. date 05.11.18 - TC 18168501
50
7326.90.90 TRACKS, metal, all terrain, over tyre type, with OR without
track locks AND/OR mounting tool
Op. 07.08.18 Dec. date 05.11.18 - TC 18171011
50
7610.90.00 PLATFORMS, UNDERDECK, modular, aluminium
Op. 06.08.18 Dec. date 02.11.18 - TC 18170993
50
8421.29.90 TORISPHERICAL SEPARATORS, including BOTH of the following:
(a) nozzles;
(b) stainless steel vessel OR tank including BOTH of
the following:
(i) internal capacity NOT less than 15 cubic metres;
(ii) manhole,
with OR without ANY of the following:
(i) baffles;
(ii) strainers;
(iii) filters
Op. 01.08.18 Dec. date 05.11.18 - TC 18168504
50
8421.99.90 PARTS, LAMELLA CLARIFIER, being stainless steel plate lamellas
AND/OR stainless steel plate lamellas modules with OR without
frames
Op. 08.08.18 Dec. date 02.11.18 - TC 18172563
50
8422.30.90 BAG FILLING AND SEALING STATION, MORTAR POWDER PRODUCTION
PLANT, programmable logic controlled, including ALL of the
following:
(a) bag filling machines;
(b) bag placer machines;
(c) bag sealing machines;
(d) conveyors
Op. 31.07.18 Dec. date 05.11.18 - TC 18167689
50
8 TCOs Made Commonwealth of Australia Gazette
No TC18/43, Wednesday, 07 Nov 2018
Description of Goods including the Schedule 4 Item Number
Customs Tariff Classification Last Date of Effect
8428.33.00 PAPERBOARD WEB DIVERTERS, CORRUGATOR, having ALL of the
following:
(a) sectional blower device;
(b) light sensor;
(c) transfer tables;
(d) hold down brush;
(e) guide plates
Op. 09.08.18 Dec. date 02.11.18 - TC 18173620
50
8428.90.00 PALLETISERS, MORTAR POWDER PRODUCTION PLANT, programmable logic
controlled, including ALL of the following:
(a) robotic arm;
(b) empty pallet dispenser;
(c) palletising station;
(d) infeed AND/OR outfeed conveyors
Op. 31.07.18 Dec. date 05.11.18 - TC 18167695
50
8428.90.00 PAPERBOARD STACKERS, CORRUGATOR, having ALL of the following:
(a) sheet brake;
(b) separating station;
(c) pivoting belt;
(d) upstacker;
(e) downstacker;
(f) drop height adjustment
Op. 09.08.18 Dec. date 02.11.18 - TC 18173618
50
8428.90.00 BOX COUNTING AND EJECTING MACHINES, DIE CUTTING LINE, including
ALL of the following:
(a) separating fingers;
(b) blower nozzles;
(c) ramps;
(d) stackers, with OR without folding devices;
(e) tables having conveyors
Op. 10.08.18 Dec. date 05.11.18 - TC 18173941
50
8433.60.00 NUT SORTING AND GRADING MACHINES, programmable logic controlled,
including ALL of the following:
(a) throughput NOT greater than 7 tonnes per hour;
(b) LED lighting;
(c) ejectors;
(d) conveyor belts;
(e) feeding hopper
Op. 08.08.18 Dec. date 05.11.18 - TC 18171854
50
8441.10.10 PAPERBOARD SLITTER AND/OR SCORERS, CORRUGATOR, having ALL of the
following:
(a) knife station;
(b) adjustable brake roll;
(c) scorer offset;
(d) scoring depth adjustment;
(e) jam detector;
(f) automated measurement setup
Op. 09.08.18 Dec. date 02.11.18 - TC 18173623
50
8474.31.00 MIXING MACHINES, MORTAR POWDER PRODUCTION PLANT,
programmable logic controlled, including ALL of the following:
(a) powder mixer;
(b) agitator;
(c) sampling valve;
(d) fan filter
Op. 31.07.18 Dec. date 05.11.18 - TC 18167681
50
9 Local Manufacturer Initiated - TCOs Revoked Commonwealth of Australia Gazette
No TC18/43, Wednesday, 07 Nov 2018
Local M anufac tur er Initiated - TC Os R evoked
CUSTOMS ACT 1901 - NOTICE PURSUANT TO SECTION 269SE(1) - AUSTRALIAN INDUSTRY INITIATED - TARIFF CONCESSION
ORDERS REVOKED
The Tariff Concession Order for the goods described in the following TABLE has been revoked.
THE TABLE
Description of Goods including the Schedule 4 Item Number
Customs Tariff Classification Last Date of Effect
3926.10.00 COVERS, DOCUMENT
Op. 19.03.07 Dec. date 08.06.07 - TC 0704130
Substitutable goods produced in Australia in the ordinary
course of business by Plastics Unique, Tingalpa, Qld. In
transit provisions apply
50
19.09.18
10 Intention to Revoke TCOs not used in over 2 years Commonwealth of Australia Gazette
No TC18/43, Wednesday, 07 Nov 2018
Intention to Revoke TCOs not used in over 2 years TARIFF CONCESSION ORDERS (TCOs) NOT USED IN THE PREVIOUS 2 YEARS
The Comptroller-General of Customs is satisfied that the TCOs listed in the table below are no longer required
because, in the 2 years preceding the day of this notice, they have not been quoted in an import declaration
to secure a concessional rate of duty.
From Thursday, 6 December 2018, it is intended to take action to revoke these Orders under subsection
269SD(1A) of the Customs Act 1901. In accordance with subsection 269SG(2) of the Customs Act 1901, in transit
provisions shall apply. If revoked, the expected date of effect will be 6 December 2018.
Interested parties are invited to provide, by close of business, Wednesday 5 December 2018, written reasons
why an Order should NOT be revoked.
Please advise if any of the Orders listed below have been quoted on an import declaration.
If a request is made to retain an Order used for the granting of a Determination, please specify the
Determination and the linked Item number to enable mapping to the Order and its scope.
THE TABLE
______________________________________________________________________________________________________________
Tariff
Classification Description Concession Number
______________________________________________________________________________________________________________
3924.90.00 HOLDERS, TOWEL, consisting of plastic clip with star shaped
holder
Op. 25.03.10 Dec. date 18.06.10 - TC 1014668
3926.10.00 CLIPBOARDS, plastic, incorporating a suction locking cap, having
BOTH of the following:
(a) memo pad;
(b) pen
Op. 04.02.10 Dec. date 23.04.10 - TC 1006210
5603.13.00 FABRIC, FILTER, non woven polypropylene, multi-layer fibres,
adhesive coated, having a weight more than 70 grams per square
metre but NOT more than 150 grams per square metre
Op. 19.01.10 Dec. date 09.04.10 - TC 1003375
7326.90.90 WHARF FENDER SYSTEM ASSEMBLIES, stainless and structural steel,
comprising ALL of the following:
(a) support frames and/or brackets;
(b) pipes and/or plates;
(c) washers;
(d) minimum fender panel height NOT less than 3.5 metres;
(e) chain plates;
(f) weight and/or tension and/or shear chains;
(g) chain tensioners;
(h) chain lugs;
(i) shackles
Op. 17.02.10 Dec. date 07.05.10 - TC 1008527
7326.90.90 PARTS, PARCEL SORTER, BI-DIRECTIONAL CONVEYOR BELT, being steel
sorting chutes
Op. 04.02.11 Dec. date 02.05.11 - TC 1105006
8207.13.00 SCRAPERS, BORING HEAD, TUNNEL BORING MACHINE
Op. 27.06.07 Dec. date 23.12.09 - TC 0949849
8418.69.00 BODY STORAGE SYSTEM, portable, modular, having an operating
temperature NOT less than minus 25 degrees C and NOT greater
than 5 degrees C
Op. 19.01.10 Dec. date 09.04.10 - TC 1003371
11 Intention to Revoke TCOs not used in over 2 years Commonwealth of Australia Gazette
No TC18/43, Wednesday, 07 Nov 2018
Tariff
Classification Description Concession Number
8421.22.00 FILTRATION MODULES, WINE AND/OR WINE LEES, consisting of BOTH of
the following:
(a) polyvinylidene fluoride (PVDF) hollow capillary membranes;
(b) polysulfone housings
Op. 12.01.10 Dec. date 09.04.10 - TC 1002051
8428.33.00 CONVEYORS, FLIGHTED, including ALL of the following:
(a) elevating conveyors;
(b) hoppers;
(c) lifting and tipping machines
Op. 01.04.10 Dec. date 25.06.10 - TC 1015691
8428.90.00 GUIDED VEHICLES, LOAD CARRYING, programmable logic controlled,
traction powered, inductive wire controlled, having ALL of the
following:
(a) traction bases;
(b) roller tracks;
(c) roller track supports;
(d) battery chargers
Op. 12.01.11 Dec. date 04.04.11 - TC 1101418
8477.80.00 FOAM RUBBER CUTTING LINES, programmable logic controlled,
comprising ALL of the following:
(a) conveyors;
(b) block cutters;
(c) cross transporters;
(d) trimmers;
(e) splitters;
(f) storage racks
Op. 26.07.10 Dec. date 18.10.10 - TC 1034146
8479.82.00 MIXERS, DRY AND MOIST AND VISCOUS MATERIAL, vertical twin
shaft, stainless steel, having BOTH of the following:
(a) three dimensional spiral upward flow and horizontal cross
flows;
(b) capacity NOT greater than 5 000 litres
Op. 18.12.09 Dec. date 12.03.10 - TC 0949437
8479.89.90 SUBSEA HYDRAULIC ACCUMULATOR MODULES, having ALL of the
following:
(a) central mandrel;
(b) piston accumulators, each having an operating pressure
NOT less than 34 450 kPa;
(c) reservoir accumulator
Op. 12.08.10 Dec. date 08.11.10 - TC 1037130
8479.89.90 LAMINATING MACHINES, SOLAR PANEL, having ALL of the following;
(a) working area length NOT less than 3 300 mm and NOT greater
than 4 600 mm;
(b) working area width NOT less than 1 700 mm and NOT greater
2 400mm;
(c) lamination material thickness NOT greater than 20 mm;
(d) NOT less than 15 and NOT greater than 25 temperature
control zones;
(e) dry pumps;
(f) upper release sheet cleaning system
Op. 22.11.10 Dec. date 28.02.11 - TC 1051419
8479.89.90 DISPLAY BOARDS, POSTER, scrolling, single sided OR double sided,
illuminated, electrically powered
Op. 15.03.11 Dec. date 06.06.11 - TC 1109094
8481.10.00 VALVES, PRESSURE REDUCING, PASSENGER TRAIN
Op. 01.02.10 Dec. date 23.04.10 - TC 1005545
12 Intention to Revoke TCOs not used in over 2 years Commonwealth of Australia Gazette
No TC18/43, Wednesday, 07 Nov 2018
Tariff
Classification Description Concession Number
8502.31.90 GENERATORS, WIND POWERED, DOWNWIND, having a power output
NOT less than 2kW, with or without EITHER of the
following:
(a) cables;
(b) controllers and/or rectifiers
Op. 10.03.11 Dec. date 01.04.11 - TC 1110769
8504.40.90 POWER UNITS, PASSENGER TRAIN, having ALL of the
following:
(a) power semiconductor incorporating a cooling system;
(b) weight NOT greater than 250 kg;
(c) rated voltage NOT less than 1 500 V DC and NOT greater
than 2 100 V DC
Op. 09.09.10 Dec. date 06.12.10 - TC 1041641
8607.19.00 GEARBOXES, BOGIE, PASSENGER TRAIN
Op. 19.01.10 Dec. date 09.04.10 - TC 1003380
13 TCOs Revoked - Unused for over 2 years Commonwealth of Australia Gazette
No TC18/43, Wednesday, 07 Nov 2018
TCOs R evoked - U nused for over 2 years
CUSTOMS ACT 1901
NOTICE PURSUANT TO SECTION 269SE(2) - TARIFF CONCESSION ORDER REVOCATION AT THE INITIATIVE OF THE COMPTROLLER-
GENERAL OF CUSTOMS
The Tariff Concession Orders listed in THE TABLE below have has not been used for at least 2 years and have
been revoked under Section 269SD(1A). In transit provisions apply.
The intention to revoke these orders was notified in Gazette TC18/37 dated 26 September 2018.
THE TABLE
Description of Goods including the Schedule 4 Item Number
Customs Tariff Classification Last Date of Effect
4005.91.00 SHEETS, styrene butadiene rubber (SBR), compounded, unvulcanised
Op. 23.02.07 Dec. date 18.05.07 - TC 0702861
2 Years non use. In transit provisions apply
50
2
23.10.18
4409.29.00 CORNICES AND/0R BASEBOARDS AND/OR CHAIR RAILS, WOOD, embossed,
unstained
Op. 01.01.07 Dec. date 04.12.06 - TC 0614743
2 Years non use. In transit provisions apply
50
23.10.18
6307.90.99 COVERS, BOAT, nylon, having elasticised hem and D-rings
Op. 17.10.06 Dec. date 22.12.06 - TC 0615933
2 Years non use. In transit provisions apply
50
23.10.18
6307.90.99 CLEANER, EYEWEAR, being a microfibre pad mounted on a swivelling
plastic handle and keyring
Op. 04.12.06 Dec. date 02.03.07 - TC 0619300
2 Years non use. In transit provisions apply
50
23.10.18
8413.70.10 SYSTEMS, RISERLESS DRILLING MUD RECOVERY, comprising ALL of the
following:
(a) centrifugal pumps;
(b) buoyant hoses;
(c) sub sea controllers;
(d) deployment winches;
(e) surface controllers;
(f) sub sea suction modules
Op. 10.11.06 Dec. date 02.02.07 - TC 0618419
2 Years non use. In transit provisions apply
50
23.10.18
8419.50.90 EXCHANGERS, HEAT, VERTICAL PLATE, having ALL of the following:
(a) heat transfer plates;
(b) frame plates;
(c) pressure plates;
(d) vapour inlet connection NOT less than 395 mm in diameter
and NOT greater than 805 mm diameter;
(e) condensate outlet connections NOT less than 95 mm in
diameter and NOT greater than 205 mm in diameter;
(f) cooling media inlet and outlet connections NOT less than
145 mm in diameter and NOT greater than 305 mm in diameter;
(g) gaskets
Op. 25.09.06 Dec. date 15.12.06 - TC 0615054
2 Years non use. In transit provisions apply
50
23.10.18
14 TCOs Revoked - Unused for over 2 years Commonwealth of Australia Gazette
No TC18/43, Wednesday, 07 Nov 2018
Description of Goods including the Schedule 4 Item Number
Customs Tariff Classification Last Date of Effect
8424.89.90 TANKS, spray cooling, having a seal flange diameter NOT greater
than 2 000 mm
Op. 02.02.07 Dec. date 30.04.07 - TC 0701745
2 Years non use. In transit provisions apply
50
23.10.18
8465.91.00 SAWS, BAND, having ALL of the following:
(a) cutting capacity NOT greater than 160 mm;
(b) input power NOT greater than 800 W;
(c) bevel angle NOT greater than 45 degrees;
(d) weight NOT greater than 77 kg
Op. 01.03.07 Dec. date 25.05.07 - TC 0703293
2 Years non use. In transit provisions apply
50
23.10.18
8465.92.00 LATHES, PLASTIC SEAL, programmable logic controlled
Op. 17.11.06 Dec. date 09.02.07 - TC 0618621
2 Years non use. In transit provisions apply
50
23.10.18
8474.20.00 GRANULATORS, ASPHALT
Op. 25.10.06 Dec. date 12.01.07 - TC 0617946
2 Years non use. In transit provisions apply
50
23.10.18
8477.20.00 EXTRUDERS, HIGH DENSITY POLYETHLENE (HDPE), single screw,
comprising BOTH of the following:
(a) bimetallic barrels;
(b) grooved haul in bushes
Op. 01.11.06 Dec. date 30.01.07 - TC 0618077
2 Years non use. In transit provisions apply
50
23.10.18
8477.80.00 CUTTERS AND REWINDERS, PLASTIC FILM, programmable logic
controlled, having a cutting diameter NOT less than 1 200 mm
Op. 05.02.07 Dec. date 30.04.07 - TC 0701869
2 Years non use. In transit provisions apply
50
23.10.18
8479.82.00 MILLS, CONICAL, PHARMACEUTICAL
Op. 18.12.06 Dec. date 09.03.07 - TC 0619948
2 Years non use. In transit provisions apply
50
23.10.18
8479.89.90 LINE, ORE PREPARATION AND ANALYSIS, computer logic controlled,
having ALL of the following:
(a) barcode scanners;
(b) industrial robots;
(c) conveyors;
(d) moisture probes;
(e) weighers;
(f) drying ovens;
(g) stainless steel sample trays;
(h) jaw crushers;
(i) splitters;
(j) grinding and/or pulverising mills;
(k) storage magazines;
(l) dosing machines;
(m) cleaning stations;
(n) fusion furnaces;
(o) labellers
Op. 08.03.07 Dec. date 01.06.07 - TC 0703685
2 Years non use. In transit provisions apply
50
23.10.18
15 TCOs Revoked - Unused for over 2 years Commonwealth of Australia Gazette
No TC18/43, Wednesday, 07 Nov 2018
Description of Goods including the Schedule 4 Item Number
Customs Tariff Classification Last Date of Effect
8481.80.90 MANIFOLDS, SUBSEA, comprising ALL of the following:
(a) multi-phase flow meters;
(b) production and gaslift choke valves having a pressure
rating NOT less than 25 MPa and stepping actuators and
retrievable choke inserts;
(c) gate valves complying with American Petroleum Institute
standard 6A (API 6A) and having a pressure rating NOT
less than 25 MPa;
(d) subsea control modules
Op. 04.09.06 Dec. date 05.01.07 - TC 0616597
2 Years non use. In transit provisions apply
50
23.10.18
8506.80.00 BATTERIES, MOBILE PHONE, having magnesium dioxide anode and
lithium cathode
Op. 19.01.07 Dec. date 13.04.07 - TC 0701072
2 Years non use. In transit provisions apply
50
23.10.18
8514.20.00 OVENS, DIELECTRIC, having NOT less than 70 kilowatts of
continuous radio frequency power, comprising ALL of the
following:
(a) 415 volt, 3 phase line power;
(b) oscillators;
(c) rectifiers;
(d) controllers
Op. 12.03.07 Dec. date 01.06.07 - TC 0703866
2 Years non use. In transit provisions apply
50
23.10.18
8527.91.00 RADIOS, comprising ALL of the following:
(a) multimedia card (MMC) connectors;
(b) universal serial bus (USB) connectors;
(c) alarm clock
Op. 01.01.07 Dec. date 08.02.07 - TC 0702021
2 Years non use. In transit provisions apply
50
23.10.18
9404.90.00 BEDS, TRAVEL BABY'S, comprising ALL of the following:
(a) mattress;
(b) cushion;
(c) shoulder strap
Op. 10.08.06 Dec. date 07.10.06 - TC 0615174
2 Years non use. In transit provisions apply
50
23.10.18
16 Comptroller-General of Customs Review of TCO Revocations Results Commonwealth of Australia Gazette
No TC18/43, Wednesday, 07 Nov 2018
Comptroller-Gener al of C ustoms R evi ew of TC O R evocations R esults
CUSTOMS ACT 1901 - 269SH(10) – RESULT OF THE COMPTROLLER-GENERAL OF REVIEW OF A REVOCATION DECISION
The Comptroller-General of Customs internal review result made on the Tariff Concession Order revocation for
goods described in the following TABLE has been finalised:
THE TABLE
Description of Goods including the
Customs Tariff Classification
Schedule 4 Item Number
Last Date of Effect
Review
Decision
TCO REVOKED
8504.40.90 CHARGE STATION, ELECTRIC MOTOR VEHICLE BATTERIES, output
voltage NOT less than 150 VDC and NOT greater than 920
VDC, being EITHER of the following:
(a) car chargers having an operating temperature NOT
less than -35 degrees Celsius and NOT greater than
55 degrees Celsius, including ALL of the following:
(i) module power NOT less than 110 kW and NOT
greater than 600 kW;
(ii) charge capability 400 V cars at 150 kW;
(iii) maximum DC output current per charge post
NOT exceeding 500 A;
(iv) input voltage NOT greater than 450 VAC,
(b) heavy vehicle chargers having an operating
temperatures NOT less than -35 degrees Celsius and
NOT greater than 50 degrees Celsius with OR without
automated 4-pole rooftop connection INCLUDING ALL
of the following:
(i) module power NOT less than 50 kW and NOT
greater than 600 kW;
(ii) output current, per 150kW module, NOT
greater than 250 A;
(iii) input voltage NOT greater than 450 VAC;
Op. 29.03.18
- TC 1836821
Comptroller-General of Customs Decision: Revocation of
TCO affirmed
50
08.07.18
REVOKED