Professional Tools & Accessories

G.D.I.Tools

Knives Page 2

Blades Page 3

Scrapers Page 4

Handled Squeegees Pages 5-6

Tube Squeegees Page 7

Squeegee Essentials Pages 8-9

Hard Cards Page 10

Meters Pages 11-13

Mark, Trim & Measure Page 14

Installation Accessories Page 15

Sprayers & Cleaning Supplies Pages 16-17

Slitters Page 18

Table of Contents

GT124

GT227 Olfa XA-1 Ergonomic KnifeThis ergonomically correct knife features a comfortable rubbergrip for better control and less fatigue.

GT127 Olfa "A" KnifeUsed for film pattern cutting and trimming. Features a moldedplastic handle for maximum control and comfort. Right or lefthand use.

GT126Olfa "Silver" Stainless Steel KnifeThe original Olfa stainless steel.

GT226 Olfa "Silver" 2 Auto-Lock KnifeSignificantly improved over the original "Olfa Silver." Featuresright or left-handed use, blade position auto-lock, and one-seg-ment click-action.

GT114 Olfa Pro-LoadHolds up to five blades at a time giving you 65 new cutting seg-ments per load.

GT124 Plastic Utility KnifeUsed for film pattern cutting and trimming.

GT264 KDS L-22 Gripfit AutolockHeavy-duty knife with comfortable grip and breakaway points for usewith security films 7 mil or greater.

GT944 Automotive Glass Edge TrimmerEnsures precise “micro-edge” on roll down windows

**Remember: ANY BLADE CAN CUT OR SCRATCH GLASS!It all depends on the glass, edge of the blade and the angleof the cut. No matter what knife or blade you use, be sureto use a SHARP blade every time!

Note: All Knives are packaged with Carbon Blades exceptfor the GT126 and GT226, which include a stainless blade.

GT027 NT Pro A-1 "Red Dot" KnifeRegarded by many installers as the finest professional knifeavailable. The blade can be advanced in 1/2 segment incre-

ments for precision control. Right or left hand use.

GT026 NT Injector Cartridge KnifeUsed for film pattern-cutting and trimming. Holds five blades for

automatic blade replacement capabilities.

GT984 NT A-1000RP KnifeCartridge cutter with aluminum die-cast grip. Cartridge holds up

to 5 blades.

GT1018 NT A250RP KnifeChemical-resistant and heat resistant polypropylene grip.

Ratchet Auto-Lock slider locks blade in place while cutting. Foruse left or right handed.

GT1019 NT L500GRP Heavy Duty KnifeNT heavy duty knife with ratchet auto-lock slider which locks theblade into place while cutting. Blade storage in handle. Use with 7

mil or greater films.

GT111 Auto Lock 8pt. KnifeHeavy-duty knife with breakaway points for use with security films

7 mil or greater. Blade storage in handle.

GT128 Ceramic Safety Film CutterDesigned to deliver rapid, precise cuts for thick gauge safety films.It is intended for precision pre-cutting on flat, square-edged tables.

**Remember: ANY BLADE CAN CUT OR SCRATCH GLASS!It all depends on the glass, edge of the blade and the angleof the cut. No matter what knife or blade you use, be sure

to use a SHARP blade every time!Note: All Knives are packaged with Carbon Blades exceptfor the GT126 and GT226, which include a stainless blade.

Knive

sKn

ives

Knive

sKn

ives

Knive

s

ww

GT027

GT126

GT114

GT226

GT227

GT128

GT264

GT944

GT984

GT127

GT1018

GT026

GT111

GT1019

GT108 6” Triumph Carbon Scraper Blades,Pack of 25

GT108SS 6” Triumph Stainless Steel BladesPack of 25

GT140-12 #12 Single Edge 1” BLD. #12 scraper blade. A thicker version of the popular #9 blade.

GT110 Heavy Duty Triumph Blades - CarbonPack of 10

Replacement blades for GT106

GT1020 NT Stainless Steel Snap BladesPack of 50

GT211 3” Triumph Blades - Carbon, Pack of 10

GT105 4” Scraper Blades - Carbon, Pack of 10GT1021 BL50P

Heavy duty NT blades for use with the GT1019, GT111, &GT264 knives.

GT139 Plastic Razor BladesPerfect for removing adhesive and leftover film from surfaces thatcan be easily damaged, such as rear window defrosters or other

sensitive glass surfaces. Pack of 100 blades.

GT140 Single Edge Blades - Carbon, Pack of 100GT137 Stainless Steel 1” Single Edge Blades

Pack of 100**Remember: ANY BLADE CAN CUT OR SCRATCH GLASS!It all depends on the glass, edge of the blade and the angleof the cut. No matter what knife or blade you use, be sure

to use a SHARP blade every time!

GT116 Olfa Stainless Steel Snap BladesPack of 50GT262 KDS S.S. - Flat Glass/PPF BladesPack of 50Ideal for flat glass and paint protection films

GT115 Olfa Stainless Steel Snap BladesPack of 10GT266 KDS S.S Flat Glass/PPF BladesPack of 10 Ideal for flat glass and paint protection films

GT265 KDS S.S Automotive BladesPack of 50GT123 Olfa Carbon Snap Blades, Pack of 50Note...these are NOT stainless steel.

GT263 KDS Powerblack 8pt Blades -Pack of 50Ideal for thicker films, 7 mil or greater. Fits GT111, GT264 &GT1019

GT112 Olfa UltraMax 8pt Blades - Pack of 50Replacement blades for GT111, GT264 & GT1019 heavy-dutyknives. Triple-honed for extremely sharp edge. Ideal for cuttingthick films, 7 mil or greater.

GT1007 4” Scraper BladesCarbon, Pack of 100GT131 8 Point Blades - Pack of 5Replacement blades for GT111, GT264 or GT1019

**Remember: ANY BLADE CAN CUT OR SCRATCH GLASS! Itall depends on the glass, edge of the blade and the angle ofthe cut. No matter what knife or blade you use, be sure touse a SHARP blade every time!

Blad

esBl

ades

Blad

esBl

ades

Blad

es

ee

GT116

GT123

GT115

GT110

GT137

GT108 GT108SS

GT140

GT262

GT266

GT265

GT263GT112

GT1007 GT131

GT211

GT139GT105 GT1021

GT1020

GT140-12

GT983 6” Ergonomic Triumph Scraper

GT983A 6” Angled Ergo Triumph Scraper

GT107 6” Triumph Scraper

GT107A 6” Angled Triumph Scraper

GT107PC 6” Triumph Scraper with Slide CoverThis is the new and improved version of the slide coveredTriumph. With a bigger button and smoother action, the covereasily opens and closes with no hassle. No more fumbling witha separate blade cover, which is safer and more convenient,especially when doing ladder work. Great for regular windowcleaning, but not recommended for stripping off old film.

GT106 Red Heavy Duty ScraperIdeal for film removal. Uses GT110 Heavy Duty TriumphBlades.

GT1023 ALLPRO 4” StripperThis 4" scraper has an adjustable head as well as an adjustableknob for two handed use. Blades can be stored inside the handle.

**Remember: ANY BLADE CAN CUT OR SCRATCH GLASS! Itall depends on the glass, edge of the blade and the angle ofthe cut. No matter what knife or blade you use, be sure touse a SHARP blade every time!

Note: All scrapers are packaged with carbon blades

GT212 1” Blade Ade

GT210 3” Triumph ScraperSmaller version of the regular Triumph. Designed to fit

perfectly into corners

GT109 1” Clip ScraperThis effective scraper will accomodate standard or stainless

steel single edge blades as well as GT139 plastic razor blades

GT109S 1” Clip Scraper w/Thumb Screw

GT1024 ALLPRO Mini Scraper1" mini scraper with slip resistant grip.

GT138 Heavy Duty 1” Razor ScraperRetractable safety scraper, intermediate blade position keeps

the blade from sliding out while in use

GT103 4” Scraper with 6” HandleThe GT103 allows for maximum leverage and speed when

removing large areas of existing film.

GT104 4” Scraper with Extended HandleLonger handle allows for even more leverage

than the GT103 scraper.

GT994 Big Blade (3” x 4”)Jumbo Size Plastic Razor Blade perfect for cleaning & film removal

**Remember: ANY BLADE CAN CUT OR SCRATCH GLASS!It all depends on the glass, edge of the blade and the angleof the cut. No matter what knife or blade you use, be sure

to use a SHARP blade every time!

Note: All scrapers are packaged with carbon blades

Scrap

ersScr

apers

Scrap

ersScr

apers

Scrap

ers

rr

GT107

GT107 PC

GT107A

GT983 GT983A

GT109SGT1024

GT1023

GT210

GT103

GT104

GT212 GT109

GT138

GT994

GT106

GT053 6" Squeegee & ChannelGT054 8" Squeegee & ChannelGT055 12" Squeegee & Channel GT056 18" Squeegee & Channel

Stainless steel channel and soft rubber squeegee blade insert foruse with the Unger Pro Handle (GT050). Used in the flat glass

cleaning process and in the final cleanup after the film installation toremove soap streaks or smudges.

GT045 140" Squeegee BladeGT048 12" Squeegee BladeGT049 18" Squeegee Blade

Replacement blades for Unger squeegee channel, used for window cleaning, not installation.

GT118 Blue Squeegee Refill (6, 8, 12, 18 or 144" roll)Used in the GT053-056 as a finishing squeegee for maximum

water removal. Replacement Blade for GT207.

GT050E Unger ErgoTec HandleFeatures a spring mechanism for quick blade changing and a finger

indent on top of handle for complete control. For use with GT053-056channels with black rubber for cleaning or blue replacement blades

(GT118) for installation.

GT205 The Bulldozer I - AutomotiveAllows you to get to those hard to reach areas, such as behind speak-

ers, brake lights, low angles and rear windows. Features a 6" squeegeeblade and is 15" in overall length.

GT206 The Bulldozer II - Flat GlassFeatures reinforced ribs on the back side for extra rigidity and leverage.

Includes 6" squeegee blade and is 15" in overall length.

GT209 The ScrubberUsed to reach behind speakers and brake lights. Scrub away

adhesive along the bottom edges of sloped rear windows. Usesreplaceable standard White Scrub Pads GT085 cut 2" x 3". This

tool is 3" by 15" long.

GT057 5" Crusher HandleGT058 8" Crusher HandleThese handles are designed to optimize your leverage in remov-ing mounting solution. Holds GT257, GT258 or GT259squeegee blades. The GT057 is great for high performanceautomotive films and smaller residential windows, while GT058is ideal for all residential and commercial applications. HoldsGT257, GT258 or GT259 (pic on page 8)

GT208 Side Swiper without blade

GT207 Side SwiperUse GT118-6 as a replacement blade

GT1005 Thor’s HammerUsed for 6-mil+ safety film installations, and final pass on slowdrying thin films. (Flat Glass Applications). GT117C replacementblade used.

GT1006 Thor’s Hammer Jr.Used for 7-mil+ auto safety film installations; for maximum waterremoval to eliminate "champagne bubbling" during thick filminstallations. (Automotive Applications). GT117C replacementblade used.

GT1022 Stroke Doctor

GT985 Performax HandleIdeal for water extraction when used with GT117, GT117B,GT203 or GT257. Features socket that accepts standard exten-sion handles such as broom or paint roller extensions. Thisallows installers to get more leverage. For even more leverage,use GT030 Motus D Grip found on page 15.

Hand

ledSquee

gees

Hand

ledSquee

gees

Hand

ledSquee

gees

tt

GT057

GT058

GT053,GT054,GT055,GT056 GT045,

GT048,GT049

GT118

GT209GT205 GT206

GT050E

For maximum solution removal, try theGT057 with a GT117A or GT203A.

GT1006

GT1022

GT985Tool Tip:

GT1005

GT208

GT207

GT117B

GT042 8" Silver Security SqueegeeComfortable, ergonomic handle is designed especially for secu-rity film installation. Curved handle applies more pressure tosurface, reducing fatigue and ensuring easier, better installa-tions. Blade is replaceable with either the Security Squeegee(GT041), Flatfoot (GT059) or Pro Squeegee (GT061) blades.

GT041 8" Silver Security SqueegeeReplacement Blade

GT069 6" Flatfoot Squeegee BladeFlatfoots are specially angled blades for the Pro Squeegee. Theangle is designed to maximize the surface area in contact withthe film, thereby removing much more mounting solution than astandard Pro blade with a square edge.

GT059 8" Flatfoot Squeegee BladeFlatfoots are specially angled blades for the 8” Pro Squeegee(GT064). The angle is designed to maximize the surface areain contact with the film, thereby removing much more mountingsolution than a standard Pro blade with a square edge.

GT061 8" Pro Squeegee BladeReplacement blade to 8" Pro Squeegee (GT064) used as ameans of removing application solutions from beneath the filmduring the installation of all flat glass film types.

GT063 6" Pro Squeegee BladeReplacement blade for the 6" Pro Squeegee (GT062) used as ameans of removing application solutions from beneath the filmduring the installation of all flat glass film types.

GT062 6" Pro Squeegee DeluxeAn installation squeegee as a ready-to-use assembly. Used toremove application solution from beneath the film during theinstallation of all flat glass film types.

GT064 8" Pro Squeegee DeluxeAn installation squeegee as a ready-to-use assembly. Used toremove application solution from beneath the film during theinstallation of all flat glass film types.

GT122 Blue Max Squeegee with HandleNew and improved handle makes this installation squeegee a

must have. This unit is sold as a complete set with the GT117Aonly. The handle is not sold seperately.

GT117 Blue Max 5" Hand SqueegeeGT117B Square Blue Max 5" Hand SqueegeeIdeal for installing security film. For extra leverage, use a

GT050 with a GT030 Motus D Grip Handle found on page 15 GT117A Angled Blue Max 5" Hand Squeegee

Installation squeegee for automotive and flat glass applications.Harder than GT203, these tools are excellent for water evacuation.

GT204 Super Clear Max Squeegee with HandleNew and improved handle makes this installation squeegee a

must have. This unit is sold as a complete set with the GT203Aonly. The handle is not sold seperately.

GT203 Super Clear Max Squeegee BladeGT203A Angled Super Clear Max Squeegee

BladeSofter version of the Blue Max Squeegee, more flexible for back

window installations.

GT050 Unger Pro HandleThis rubber-coated squeegee handle works with many different

squeegee blade attachments: Clear Max, Blue Max, BlueSqueegee Blade and of course the regular squeegee blade withthe soft rubber insert (for glass prep) in the stainless steel chan-nels. Essential tool for glass cleaning and for using the special

higher durometer finishing squeegee blades.

GT117C Square Blue Max-NarrowReplacement Blade for GT1005 or GT1006

Hand

ledSquee

gees

Hand

ledSquee

gees

Hand

ledSquee

gees

yy

GT122

GT204

GT117

GT117A

GT203

GT203A

GT050

GT042

GT061

GT041

GT064GT062

GT063

GT059

GT069

GT117C

GT235 5 1/2" Yellow Turbo SqueegeeGT236 5 1/2" Yellow Turbo Squeegee Blade

An installation squeegee used to remove application solution from beneath the film during

installation of all auto films.

GT145 18 1/2" Yellow Turbo Squeegee

GT147 18 1/2" Yellow Turbo Squeegee BladeEconomy size squeegee usually cut to shorter 4-5"

lengths before use. Used for removal of application solu-tion during the installation process.

GT152 5” Red Turbo BladeGreat for Paint Protection Films

GT119 4" Black Smoothie Tube Squeegee

GT120 9" Black Smoothie Tube Squeegee

GT121 28" Black Smoothie Tube Squeegee

GT146 28" Black Smoothie Blade OnlySqueegee tool used for glass cleaning, sometimes calledthe "Smoothie." Economy size (28”) usually cut to shorter4-5" lengths before use.

GT144 20" Blue Turbo Blade

GT150 Red Turbo SqueegeeUsed for removal of application solution during theinstallation process. Also used for paint protection film installations.

Tube

Squee

gees

Tube

Squee

gees

Tube

Squee

gees

Tube

Squee

gees

uu

GT120GT119

GT146GT121

GT235 GT236

GT150

GT152

GT145

GT147

GT144

Durometer Legend:

Hardest

Softest���������������

Durometer Legend:

Hardest

Softest���������������

�

��

����

���

�

�� ��

��

��

���

GT1000

GT040 Slim FootModeled after the Big Foot Squeegee, the slim foot has a slen-der design that can reach into tighter openings. This no ribsqueegee helps reach behind break lights and has a vinyl gripfor secure handling.

GT043 Big FootDesigned to reach curved back glass windows. This 6"squeegee with a 12" handle allows the installer to apply the nec-essary pressure in those tight rear window areas. This is amust for every installer’s tool box.

GT044BLU Little Foot BlueGT044RED Little Foot RedGT044BLK Little Foot BlackThis squeegee measures about 6" (15 cm) along the usableedge. The pointed edge of this tool allows the installer tosqueegee in very tight areas. The Little Foot has plenty of roomto keep a good grip on the squeegee.

GT033 Red Devil SqueegeeFlexible squeegee that is great for tight corners and maneuver-ing around gaskets.

GT091 SlammerUsed for cleaning corners and along gaskets, wicking water out along borders and easily reaches rear win-dows and sharp angled corners.

GT092 ShuttleA hard card with the ability to reach into tight areas locatedat the bottom edge of rear window glass.

GT148 Block Squeegee, Plain 6”

GT149 Block Squeegee, Plain 12”

GT202 The Conquerer

GT202B Blue ConquererSame as the original Conqueror GT202 with a slightly harder

durometer for more squeegeeing power.

GT254 Power Stroke BlueGT255 Power Stroke Red

GT256 Power Stroke YellowBlue has a durometer for the ultimate in

moisture removal, especially for sputtered films. Red is greatfor final pass on metal films. Yellow works well with dyed films

and first pass on metal films.

GT1000 MACTAC Felt SqueegeeRecommended for Paint Protection Installations

GT1010 3M Wet or Dry SqueegeeRecommended for Paint Protection Installations

GT995 White Knight SqueegeeLarge squeegee with narrow handle allowing for better

reach

GT257 5" Orange CrushGT258 5" Cropped Orange Crush

GT259 8" Orange CrushThese blades help expel water from under film while keeping itsstrength. The 5” Cropped Orange Crush conforms to curved

glass. Blades can fit into a handled grip (GT057, GT058) or beused alone.

Squee

geeEs

sentia

lsSquee

geeEs

sentia

lsSquee

geeEs

sentia

ls

ii

GT040 GT043

GT044BLUGT044REDGT044BLK

GT033GT091

GT092

GT148 GT149

GT202

GT1010

GT995

GT202B

GT254-256

Durometer Legend:

Hardest

Softest���������������

�

��

���

�����

��

�

�

GT258GT257 GT259

GT113 Green Green Diamond TipGT113 Red Red Diamond Tip

GT113 White White Diamond TipGT113 Yellow Yellow Diamond Tip

These 5” cards have angled corners that allow installers toreach into tight corners making it a great tool for automotive

and flat glass applications.

GT201G Green Contour (Soft)

GT201Y Yellow Contour (Firm)

GT201PLT Platinum Contour (Hard)

GT200 GLD EZ Reach GoldGT200 PLT EZ Reach Platinum

GT151Y Yellow Quick FootGT151B Blue Quick Foot

GT151W White Quick FootGreat automotive tools for those hard to reach places.

GT032Y Tail Fin Yellow (Firm)GT032G Tail Fin Green (Soft)Great for getting behind brake lights and back windowapplications.

GT067 Clear Super Squeegee, Small 3”

GT1025Y Quick Fix-YellowGT1025W Quick Fix-WhiteGT1025PLT Quick Fix-PlatinumCard squeegee with good angles that extend your areafor better manipulation. Great for getting behind gasketsand rubber seals.

GT066 Clear Super Squeegee, Large 6”

GT034 Whale TailGreat for getting behind brake lights and back windowapplications.

GT068 Hard Card Sharpener

GT035 Whale Tail Replacement Blade (not pictured)

GT036 Whale Tail Replacement Handle

GT038 Clear Super Squeegee, Extra Large 12”

Squee

geeEs

sentia

lsSquee

geeEs

sentia

lsSquee

geeEs

sentia

ls

oo

GT032Y

GT067GT032G

GT1025PLT

GT1025W

GT201PLT

GT1025Y

GT066

GT034

GT036 GT038

GT201YGT201G

GT113 Green, Red, White, Yellow

GT200 PLT

GT200

Try the softer GT032G forpaint protection installationsTool Tip:

Durometer Legend:

Hardest

Softest���������������

���

��

�

�

��

� �� ��� ����

���

����

���

GT151WGT151BGT151Y

�

��

���

���

GT068

GT087� GT079��

GT086BLU Blue Hard Card Squeegee

GT086 White Hard Card Squeegee

GT086BLK Black Hard Card Squeegee

GT086PNK Pink Hard Card Squeegee

GT086GLD Gold Hard Card Squeegee

GT086PLT Platinum Hard Card Squeegee

GT086 PURPLE Purple Hard Card

GT086-6Y 6” Yellow Hard Card Squeegee

GT086-6W 6” White Hard Card Squeegee

GT086-6B 6” Black Hard Card Squeegee

GT087 Yellow Lidco Squeegee

GT079 4” 3M Gold Squeegee

GT087Gray Gray Lidco Squeegee

GT087-6 GRAY 6” Gray Lidco Squeegee

GT099 Universal Squeegee

GT080 4” 3M Blue Squeegee

GT088 Bondo Squeegee

GT083 Lil’ Chizler

Hard

Card

sHa

rdCa

rds

Hard

Card

s

aa

GT086BLU

GT086-6B

GT086-6W

GT086BLK GT086PNK

GT086GLD GT086PLT

GT088 GT083

GT080GT099

GT087-6 Gray

Durometer Legend:

Hardest

Softest

GT086-P

GT086-6Y

���������������

Durometer Legend:

Hardest

Softest���������������

���� �����

��

��

��GT087 Gray

��

��� �

����

�

�

����

���

GT086���

GT960 Low-E Coating DetectorDetects the presence and location of thermal resistant coatings(LOW-E) used on energy efficient single and dual pane glass.Never requires calibration. Powered by a 9-Volt alkaline battery

(included)

GT961 Insulated Glass Thickness & Gap GaugeUsed to measure glass and air space thickness in sealed insulating glassunits. Laser reflections off the surfaces of glass appear on the graduatedscale of the gauge allowing you to easily determine the thickness of theglass, plus the air space separating the pieces of glass in a sealed IGassembly. Powered by two standard AAA alkaline batteries. (included)

GT969 Toughened Glass IndicatorUsed to determine which, if any, panes in a window unit are

heat-treated. Knowing this allows use of films that would other-wise be inappropriate on regular annealed glass. Full set of

user instructions and leather case included.

GT975 Strengthened Glass DetectorAllows users to confirm if glass has been strengthened. The detec-tor can test single panes of glass or multiple panes in a window ata single time, and from a single side. As a bonus, the SG2700

detector can even identify the thickness of the first piece of glass inthe window.

GT966 V.L.T. and Power MeterThe GT966 shows the performance of your film and proves to your

customer that your product reduces fading by controlling visiblelight. It calculates visible light transmission percentages, powerreadings (W/m2), measures visible light spectrum (400-700 NM),and includes a digital thermometer in Centigrade and Fahrenheit.

Powered by a 9-volt battery (included)

GT978 Laser Thermometer Reads temperatures of solid surfaces, best when usedwithin three feet of surface. Demonstrate difference oncewindow film is applied to glass with new reading of solidsurface. Not to be used on glass.

GT963 U.V. Light Source LampExcellent tool to demonstrate, measure or show howmuch U.V. window films keep out.

GT972 Digital Tape MeasureThis compact meter uses a narrow beam to measure dis-tances instantly, even through door openings and incrowded rooms.

GT962 Heat Lamp UnitGreat tool for tabletop presentations.

Meter

sMe

ters

Meter

sMe

ters

Meter

sMe

ters

ss

GT962

GT972

GT963

GT966

GT961GT960

GT969

GT975

GT978

For sales performed during the sunny part of the day, pointthe GT978 temperature gun at furniture and other valuablesto actively demonstrate how much heat is being added to thehouse due to the sun's heat rays and explain the damagingeffects this can have.

Tool Tip:

GT973 UV Sentry MeterPosition the meter facing the UV source, such as sunlightor a heat lamp (GT962), and turn the meter on. Placevarious materials between the meter and the UV sourceand the resulting UV Transmission percentage will be dis-played.

GT964 U.V. Meter with temperatureThis meter gives UV transmission percentages, UV power, andtemperature. The GT964 is the most versatile product availablefor measuring UV. You can measure UV intensities (irradiance),UV Transmission %, and temperature in Fahrenheit andCelsius. Unlike other UV products on the market, the GT964is extremely simple to operate. The digital display is continu-ally updated with real-time readings. The GT964 is poweredby a 9 volt battery (included).

GT977 UV & Solar Dual Transmission MeterCombines the popular features of the GT973 & GT968 into onesimple to use meter.

GT967 Digital BTU MeterThis wide spectrum digital meter measures solar radiantenergy intensity directly transmitted through glass (or thefilm-glass combination) in units of BTUs per square footper hour or watts per square foot. Effective tool showingthe relative effectiveness of various films in blocking solarradiant heat. Especially useful for showing how a verydark dyed film may allow far more energy to pass throughthan a much lighter metallic film.

GT968 Digital BTU & Trans-MeterUse this meter to evaluate solar performance. It provides excel-lent resolution, reading low light conditions more accurately thancompetitors, with no need for adjustments. The easy to readdigital display toggles between power and transmission percent-age mode. It's small, portable, and convenient to take out in thefield.

GT974-SOFT Professional Meter Sales KitWith Soft-Sided Case

Our UV & Solar Sales Presentation Kits offer a single source forconvenient and convincing sales demonstrations. The kitsinclude locations for glass samples, digital meters, lamps,

product literature & more. Show your customer performancenumbers they understand, by using our simple Solar

Transmission GT968 and UV Transmission GT973 Meters. Thisdemonstration WILL SELL your customers because it operatesin terms they can understand. A popular optional item that may

be added to the kit is the GT978 Laser Thermometer.

Kit Includes:GT968 Digital BTU & Trans-Meter

GT962 Heat Lamp UnitGT973 UV Meter

GT963 U.V. Light Source Lamp Soft Case with Strap

Optional GT978 Laser Thermometer

Note: GT976 Glass samples NOT included in kits

GT971 Soft Case For MetersGT997 PR33400 Beamsplitter Pro

Three real-time measurements. Perfect for large scalepresentations.

GT976 Glass Sample SetConduct your sales demonstration effectively by including glasssamples to help illustrate the benefits of film over standard glass.

Includes 2 clear single pane, 2 clear IG and 2 low- E sets.

GT996 AE4600 Solar Gain Low-E DetectorProfessional state-of-the-art meter that detects the

surface of Low "E" and ranks the SHGC (low,med,high)

Meter

sMe

ters

Meter

sMe

ters

Meter

sMe

ters

dd

GT973

GT967

GT964

GT968

GT974Soft

Note: Not all items pictured are included in kits

GT977

GT996

GT976 GT997

GT971

GT174 Pocket Detective MeterMeasures visible light transmission and visible

light reflectivity on fixed windows.

GT175 Pocket Detective 2.1 BaseUsed to measure visual light transmission on roll down

windows.

GT992 LaserLabs M100 one piece meterUsed to measure visual light transmission on roll down

windows

GT993 LaserLabs M200 two piece meterMeasures Visible Light Transmission on fixed windows.

GT982 Spectrum Detective MeterEffortlessly demonstrate three performance characteristics ata time: UV, Visible, and Infrared transmission values.

The Spectrum Detective shows your customer performancenumbers they can understand and proves to them that your"high performance" window films are worth their investment.Simply slide the glass sample into the opening and see theresulting values displayed. No additional light sources areneeded. Everything is self-contained in a single convenientpackage.

Note: Glass samples not included

ff

GT982

GT174

GT175

GT992 GT993

UltravioletMeasurement

Visible LightMeasurement

InfraredMeasurement

The GT982 Spectrum Detective is ideal for in home demon-strations to illustrate the effectiveness of window film toreduce fading. It will show the reduction of the top three fac-tors that cause fading: Ultraviolet Light, Visible Light andHeat.

Tool Tip:

To ensure a legal installation, be aware that the visiblelight transmission of the factory glass must first be takeninto consideration. To determine if the completed installa-tion will be within the legal limits, measure the glass with-out film, then multiply that figure by the visible light trans-

mission of the film.

Tool Tip:

Meter

sMe

ters

Meter

sMe

ters

Meter

sMe

ters

GT157 1/2” Black Out Tape - 150’ Roll

GT158 1” Black Out Tape - 150’ Roll

GT159 1 1/2” Black Out Tape - 150’ Roll

GT990 3/8” Red Film TapeGT991 1” Red Film Tape

GT981 Do Not Roll Down Stickers (1000 perroll)Features low-tack adhesive

GT078 1 1/2” Black Acrylic Felt - 50’ RollHelps reduce scratching of automotive films on somevehicle roll down windows.

GT078-75 3/4” Black Acrylic Felt - 50’ Roll

GT075 Yellow Film MarkerHandy for 3 basic purposes: a) marking film prior to installationof windows with unusual shapes (arches, trapezoids, etc.) which

must be cut to approximate shape before the final "lay-up;" b) circling a contaminant (hair or fiber) before pullingback the film to remove it; c) marking film edges to check forglass movement on side roll-ups during the trimming process.

Yellow grease mark easily wipes away.

GT076 Film Opaquer Pen - Thin PointUsed by installers to hide fine line mistakes in trimming which

cause excess light intrusion at the film edge.

GT077 Film Opaquer Pen - Broad PointUsed by installers to hide fine line mistakes in trimming which

cause excess light intrusion at the film edge.

GT187 12” Triangle 45/90 degrees with Circle Templates

GT186 8” Triangle 30/60 degrees w/Circle Templates

GT183 18” Straight Rule

GT182 36” Straight Rule

GT188 Windshield WizardAllows for quick and accurate trimming around

rear-view mirror mounts

Mark

,Mesu

re&

Trim

Mark

,Meas

ure&

Trim

gg

GT075 GT076

GT077

GT186

GT187

GT182

GT078

GT157,GT158,GT159

GT183

GT990

GT991

GT078-75

GT981

Tool Tip:Application of Felt tape has become a popularsolution to the familiar “scratching” problem oncertain vehicles.

GT188

GT921 Jiffy Steamer Film Remover (120 Volt Use)

The Jiffy Steamer is a commercial steamer, impact resist-ant, 1300 watt heating element, heats up in 2

minutes with 2 hours of steaming per filling. Great forremoving film and adhesive off back windows.

GT979 Kevlar Heat Gloves (Pair)GT194 Gasket Push Stick

GT176 Waist ApronGT251 Wagner HT3500 Digital Heat Gun

(120 Volt Use)This model allows you to heat shrink in low or high fan

speeds and has a variable temperature setting to fine tunethe amount of heat needed for a specific application.

GT250 Wagner Heat Gun (120 Volt Use)

GT1004 OLFA DC4 Blade DisposalBlade disposer that can be emptied and re-used.

GT030 Motus D Grip HandleGT132 Hook ToolGT191 The Edge ToolUsed to pull back gaskets.

GT190 5-Way Trim GuideGT190 WHITE White 5 Way Trim GuideGT135 BLADEaterDesigned for professional installers, the BLADEater holds yourknife safely and securely, and allows you to easily snap and dis-card blades into the replaceable well

GT134 BLADEater Replacement WellGT130 Gasket WizardThis device is used to carefully pull back gaskets for easyfilm-to-glass installations below the gasket. Rub rails arelocated at the base of all automotive door window glassand are used for weatherproofing the openings betweenthe glass and the door structure. Many installers find theGasket Wizard helpful, even without the use of thebungee cords.

Insta

llatio

nAc

cessor

iesInsta

llatio

nAc

cessor

ies

hh

GT191GT190

GT132

GT030

GT130

GT921

GT251GT250

GT176

GT979

GT194

In addition to a trim guide, the GT190 5-Way Tool is also an effec-tive squeegee, especially when wrapped with a paper towel orcloth to absorb moisture along the border of the film.

The GT921 Jiffy Steamer will help prevent damagingdefroster lines when removing film from rear windows.

Besides making life easier, the GT921 will pay for itself injust a few jobs when you consider the considerable time

savings.

GT135

GT134

GT1004

GT190 White

Tool Tip:

Tool Tip:

GT090 Spraymaster Trigger SprayerAn overall heavy duty one quart sprayer, this spray bottlecomes with a 5 year warranty and is chemically resistant.It is equipped with a strong trigger and holds 32 oz.

GT097 32oz. Bottle

GT098 Adjustable Spray Pump

GT096 Polyspray 2This pressurized spray bottle holds more solution than the32 oz. bottles and reduces "finger-fatigue," eliminating theneed for pumping while spraying via a simple trigger.Handy for large windows and long-duration sprays. Hasan adjustable spray nozzle.

GT101N Stainless Steel 5 Gallon SprayerDeluxe pressure sprayer holds up to 5 gallons of mounting solution in a stainless steel tank. Hose can reach upto 15’ in length. Fill with solution and pressurize with air fromany compressor. Curly, flexible hose reaches into cars orstretches to go up a ladder with you.

GT101-HG 25’ Replacement hoze and spraygun for GT101N.

GT101-H Replacement spray gun for GT101N.

GT094 Replacement Nozzle for 3 Gallon Sprayer

GT102-OP Replacement Pump for BLACK 3 Gallon Sprayer

GT102 3 Gallon Pressure SprayerStores either window cleaner or application solution. Essential

for those big commercial jobs. Long 13' hose allows greatmobility and large capacity gives uninterrupted and fatigue-freeinstallation. Utilizes a GT094 Nozzle that features a brass fan-

type spray tip.GT102P Replacement Pump for ORANGE 3Gallon Sprayer.

GT989 7 Gallon Twin SprayerPerfect for shops or large commercial jobs, this 7 gallon sprayerincludes a cart and two 25’ coiled hoses with guns. No moreneed for an air compressor or constantly pumping tanks. Use

only with GFCI protected circuits. (120 Volt Use)

GT1008 Impact 2 Quart SprayerPressurized spray bottle holds ½ gallon and reduces "finger-fatigue," eliminating the need for pumping while spraying via a

simple trigger. Has adjustable spray nozzle.

Spra

yers&

Acces

sories

Spra

yers&

Acces

sories

jj

GT090

GT097

GT094

GT101N

GT102-OP

GT098

GT102

GT1008

GT989

GT096

GT101-HG

GT101-H

Clean

ingS

uppli

esCl

eanin

gSup

plies

Clean

ingS

uppli

es

kk

GT070 Low Lint Wipes

GT071 Virtually “Lint Free” Reusable Wipes

GT072 Wipe DispenserFor use with GT070

GT085 White Scrub PadGreat for cleaning windows prior to installation.

GT085 THK 1” Thick Scrub Pad 6”x9”Great for cleaning windows prior to installation. Not pictured.

GT070

GT072 GT085

GT160

GT714GT162P

GT735

GT164

GT715GT733

GT716

Tool Tip:

GT160 19 oz Film Guard GT164 Sprayway Adhesive Remover

GT715 Sprayway Glass CleanerGT716 Plexus Plastic Polish

Anti-static plastic polish - safe for all window films. Leavesbehind a protective sheen on any plastic surface.

GT733 Dirt-Off1 quart concentrate cleaning solution

GT714 X-100 Mounting SolutionNot to be used with bronze flat glass films.

GT162P Pink Adhesive RemoverGT735 Film-On

1 quart concentrate mounting solution

** Be careful when using GT164 and GT162P,they contain chemicals that may

damage car interiors.

After installing film, be sure to clean and polish itwith GT160 Film Guard. It is specifically

designed for window films and is a great add-on.

Tool Tip:low lint or wipes are a necessity for quality window filminstallations. Absorbent wipes are ideal for cleaning win-dows and covering hard cards.

GT071

Slitte

rs&

Acces

sories

Slitte

rs&

Acces

sories

ll

GT943 Filmhandler Replacement Blades

GT940 Filmhandler Repair Kit

GT912 Filmhandler Cutter Assembly

GT986 Filmhandler Blade Holder

GT913 12” Filmhandler Riser Assembly forSecurity Film with 6” cores

GT942 1/4” 3” Cutter Shim GT941 1/8” 3” Cutter Shim

GT1012 1/4” Cutter Shim for 6” HubsSold as eaches (1)

GT1013 1/8” Cutter Shim for 6” HubsSold as eaches (1)

GT913

GT912

GT822 GT821

GT1013

GT904

GT941(1/8”)

GT943

GT986

GT910 (60”)GT911 (72”)

GT942(1/4”)

The GT910 and GT911 filmslitters will reduce waste,save labor and help com-plete jobs in a more timelymanner. They can also bewall mounted for use inautomotive applications.

GT940

Keep film from "telescop-ing" with a film cutter shim.It fills the gaps that may

exist between the 3" hubsand film, insuring a correct

fit. You can use as many as needed, or combine a1/4" thick shim with a 1/8" thick shim.

Tool Tip:

Tool Tip:GT1012

GT1002-CH

GT1002

GT822 72” Box Slitter Channel72" aluminum U-channel for sliding over the edge of afilm box-top to serve as a straight edge when making hor-izontal cuts (across the web width) after pulling film out todesired length. Handy for in-field work. Saves the cost ofmore expensive film cutters.

GT821 Blade Holder for GT822

GT910 60” Film Handler - Includes Metric andImperial measurements

GT911 72” Film Handler - Includes Metric andImperial measurementsNote: Ladder not included

GT1002 Clean Cut Box SlitterAn economical slitter assembly.Available in 36", 48", 60"& 72"(Cutter head sold seperately).

GT1002-CH Clean Cut Cutter Head AssemblyCutter head assembly for the clean cut box slitter.

GT904 3” Roller AssemblyComes Standard on FilmHandler sold as pairs (2).

Durometer Legend:

Hardest

Softest

G.D.I.145 Mountain Brook Dr.

Canton, GA 30115www.gditools.com

877-GDI Tool (434-8665)or Local (770) 345-1275

Fax (770) 345-2394admin@gditools.com

Tools

���������������