gear box-motor gear box
TRANSCRIPT
EPICYCLOIDAL GEAR BOX
EPICYCLOIDAL GEAR BOX
The standard stock General Gear epicycloidal gear boxes are the ideal solution for any type of machinery that
requires torques up to 6 Nm. Cheap and reliable are completely made in Italy.
GEAR BOX TYPE RATIO H
TORQUE LIMIT [Nm]
MAX TORQUE INTERMITTENT FUNCTION [Nm]
MAX TORQUE CONTIN.
FUNCTION [Nm]
MERCURY 1:16 33 3.5 2.0 1.0
VENUS 1:64 39 3.5 2.0 1.0
MARS 1:256 45 3.5 2.0 1.0
SATURN 1:64 45 6.0 4.0 2.0
N° 3 holes at 120 ° of radius R = 10 for self-tapping screws Ø2.9; penetration max: 9.5mm;
available penetration: 6mm
Standard gear box material (MERCURY, VENUS,
MARS)
Body and gears: Delrin 500
Output shaft: stainless steel AISI420
Sleeve bearings: self-lubricating sintered
Materials for reinforced gear box (SATURN)
Body and gears, I° stage: Delrin 500
Gears II & III stage: Hardened and tempered steel
Output shaft: AISI 420 stainless steel
Sleeve bearings: self-lubricating sintered
The motor sprocket is available with hole for shaft Ø2.3 and, upon request, with hole for shaft Ø2, Ø3.17 and Ø4.
Composition for motors with approximately Ø28
Composition for motors with approximately Ø35
The scope of supply includes:
1. Gear box
2. Flange
3. Motor sprocket for shaft Ø2.3 and, upon request,
Ø2, Ø3.17, Ø4.
The motors Ø27/28, since they have the connections
indicated are compatible with all types of our gearboxes.
The scope of supply includes:
1. Gear box
2. Flange
3. Motor sprocket for shaft Ø2.3 and, upon
request, Ø2, Ø3.17, Ø4.
4. Additional flange which increases the
proportion of H 6mm.
The motors Ø35/36, since they have the connections
indicated are compatible with the following gearboxes:
MERCURY, SATURN.
Please note that the maximum torque indicated above shall not be exceeded.
For the versions presented in this paper, the gear box shall be provided with no motor and no screws.
EPICYCLOIDAL MOTOR GEAR
EPICYCLOIDAL MOTOR GEAR
The General Gear epicycloidal motor gear boxes are the ideal solution for any type of machinery that requires torques
up to 6 Nm at 12V and 24V. Cheap and reliable are completely made in Italy.
Epicycloidal motor gear box with motor Ø28 at 12V DC
NOTE
- Gear box body Material &
gears: DELRIN
- Output shaft material:
STAINLESS STEEL.
- 1: Sleeve bearings: self-
lubricating sintered
Values are indicated at cold.
Some versions are
personalized with encoder.
Please contact our technical
department.
* Tends to stop with gradual
load.
MARS D28-12
Type Standard
Ratio 256:1
Quote L [mm] 122
Quote A [mm] 45
Io / Icc [A] 0.4 / 4
Power [W] ~12
Output R.P.M.(no load) ~35
Input Motor R.P.M. ~9000
Gearbox torq. lim.[Nm] 3.5
Starting Torque [Nm] 3.0
Torque [Nm] 0.5 0.8 1 1.2 1.5 1.8 2
Exit RPM 32 30 29 28 27 26 25
Absorbed Current(A) 0.5 0.64 0.7 0.9 1 1.2 1.4
Service Type cont. cont. cont. cont. cont. int. int.
VENUS D28-12
Type Standard
Ratio 64:1
Quote L [mm] 116
Quote A [mm] 39
Io / Icc [A] 0.4 / 3.6
Power [W] ~12
Output R.P.M.(no load) ~140
Input Motor R.P.M. ~9000
Gearbox torq. lim.[Nm] 3.5
Starting Torque [Nm] 1.75
Torque [Nm] 0.3 0.5 0.8 1 1.2 1.75
Exit RPM 120 108 90 73 60 *
Absorbed Current(A) 0.82 1.2 1.75 2.1 2.46 3.6
Service Type cont. cont. int. int. int. int.
MERCURY D28-12
Type Standard
Ratio 16:1
Quote L [mm] 110
Quote A [mm] 33
Io / Icc [A] 0.3 / 3.6
Power [W] ~12
Output R.P.M.(no load) ~560
Input Motor R.P.M. ~9000
Gearbox torq. lim.[Nm] 3.5
Starting Torque [Nm] 0.5
Torque [Nm] 0.05 0.1 0.2 0.3 0.5
Exit RPM 500 430 340 250 *
Absorbed Current(A) 0.6 1.2 1.75 2.1 3.6
Service Type cont. cont. int. int. int.
EPICYCLOIDAL MOTOR GEAR
EPICYCLOIDAL MOTOR GEAR
Epicycloidal motor gear box with motor Ø28 at 24V DC
NOTE
- Gear box body Material &
gears: DELRIN
- Output shaft material:
STAINLESS STEEL.
- 1): Sleeve bearings: self-
lubricating sintered
Values are indicated at cold.
Some versions are
personalized with encoder.
Please contact our technical
department.
* Tends to stop with gradual
load
MARS D28-24
Type Standard
Ratio 256:1
Quote L [mm] 122
Quote A [mm] 45
Io / Icc [A] 0.2 / 2
Power [W] ~12
Output R.P.M.(no load) ~35
Input Motor R.P.M. ~9000
Gearbox torq. lim.[Nm] 3.5
Starting Torque [Nm] 3.0
Torque [Nm] 0.5 0.8 1 1.2 1.5 1.8 2
Exit RPM 32 30 29 28 27 26 25
Absorbed Current(A) 0.25 0.32 0.35 0.45 0.5 0.6 0.7
Service Type cont. cont. cont. cont. cont. int. int.
VENUS D28-24
Type Standard
Ratio 64:1
Quote L [mm] 116
Quote A [mm] 39
Io / Icc [A] 0.2 / 1.8
Power [W] ~12
Output R.P.M.(no load) ~140
Input Motor R.P.M. ~9000
Gearbox torq. lim.[Nm] 3.5
Starting Torque [Nm] 1.75
Torque [Nm] 0.1 0.3 0.5 0.8 1 1.2 1.75
Exit RPM 125 120 108 90 73 60 *
Absorbed Current(A) 0.2 0.41 0.6 0.88 1.05 1.23 1.8
Service Type cont. cont. cont. int. int. int. int.
MERCURY D28-24
Type Standard
Ratio 16:1
Quote L [mm] 110
Quote A [mm] 33
Io / Icc [A] 0.15 / 1.8
Power [W] ~12
Output R.P.M.(no load) ~560
Input Motor R.P.M. ~9000
Gearbox torq. lim.[Nm] 3.5
Starting Torque [Nm] 0.5
Torque [Nm] 0.05 0.1 0.2 0.3 0.5
Exit RPM 500 430 340 250 *
Absorbed Current(A) 0.3 0.6 0.88 1.05 1.8
Service Type cont. cont. int. int. int.
EPICYCLOIDAL MOTOR GEAR
EPICYCLOIDAL MOTOR GEAR
Epicycloidal motor gear box with motor Ø36 at 12V DC
NOTE Values are indicated at cold.
Some versions are personalized
with encoder. Please contact our
technical department.
SATURN D36-12 Type Reinforced
Ratio 64:1
Quote L [mm] 140
Quote A [mm] 51
Io / Icc [A] 0.5 / 6
Power [W] ~17
Output R.P.M.(no load) ~80
Input Motor R.P.M. ~5000
Gearbox torq. lim.[Nm] 6
Starting Torque [Nm] 4.5
Torque [Nm] 0.5 1 1.5 2 2.5 3 3.5
Exit RPM 70 62 52 47 40 28 *
Absorbed Current(A) 1 1.6 2.2 2.4 2.9 3.3 6 Icc
Service Type cont. cont. cont. cont. int. int. int.
* Tends to stop with gradual load
MERCURY D36-12 Type Standard
Ratio 16:1
Quote L [mm] 128
Quote A [mm] 39
Io / Icc [A] 0.4 / 6
Power [W] ~17
Output R.P.M.(no load) ~315
Input Motor R.P.M. ~5000
Gearbox torq. lim.[Nm] 3.5
Starting Torque [Nm] 1.55
Torque [Nm] 0.2 0.4 0.6 0.8 0.9
Exit RPM 300 260 200 165 110
Absorbed Current(A) 0.8 1.4 2.3 2.7 3.3
Service Type cont. cont. int. int. int.
NOTE – Reinforced type
- Gear box body material & gears 1st
stage: DELRIN
- 2nd & 3rd stage gears: TEMPERED & HARDENED STEEL.
- Output shaft material: Stainless steel
- 1: Sleeve bearings: self-lubricating sintered
NOTE – Standard type
- Gear box body material & gears: DELRIN
- Output shaft material: Stainless steel
- 1: Sleeve bearings: self-lubricating sintered
EPICYCLOIDAL MOTOR GEAR
EPICYCLOIDAL MOTOR GEAR
Epicycloidal motor gear box with motor Ø36 at 24V DC
NOTE Values are indicated at cold.
Some versions are personalized with
encoder. Please contact our technical
department.
SATURN D36-24 Type Reinforced
Ratio 64:1
Quote L [mm] 145
Quote A [mm] 51
Io / Icc [A] 0.25 / 3
Power [W] ~17
Output R.P.M.(no load) ~80
Input Motor R.P.M. ~5000
Gearbox torq. lim.[Nm] 6
Starting Torque [Nm] 4.5
Torque [Nm] 0.5 1 1.5 2 2.5 3 3.5
Exit RPM 70 62 52 47 40 28 *
Absorbed Current(A) 0.5 0.8 1.1 1.2 1.45 1.65 3 Icc
Service Type cont. cont. cont. cont. int. int. int.
* Tends to stop with gradual load
MERCURY D36-24 Type Standard
Ratio 16:1
Quote L [mm] 133
Quote A [mm] 39
Io / Icc [A] 0.2 / 3
Power [W] ~17
Output R.P.M.(no load) ~325
Input Motor R.P.M. ~5000
Gearbox torq. lim.[Nm] 3.5
Starting Torque [Nm] 1.55
Torque [Nm] 0.2 0.4 0.6 0.8 0.9
Exit RPM 300 260 200 165 110
Absorbed Current(A) 0.4 0.7 1.15 1.35 1.75
Service Type cont. cont. int. int. int.
NOTE – Reinforced type
- Gear box body material & gears 1st
stage: DELRIN
- 2nd & 3rd stage gears: TEMPERED & HARDENED STEEL.
- Output shaft material: Stainless steel
- 1: Sleeve bearings: self-lubricating sintered
NOTE – Standard type
- Gear box body material & gears: DELRIN
- Output shaft material: Stainless steel
- 1: Sleeve bearings: self-lubricating sintered