GearlessDrive technology for MRL

and modernisation

PMC145-2

DAF270XL with manual release

DAF210L

2regenerat ion

Gearless - Machines

PMC - DAFDrives that moves you SAFELY

EfficientWith our synchronous gearless series (PMC and DAF) one of the most compact drives is availab-le for deployment in energy efficient modernisation / or system solutions, ideally suited for energy recovery. These series stand out as excellent value for money.

SafeA safety brake is used in all gearless drives available from LiftEquip, which is licensed as safety brake against excessive speed upwards in accordance with EN81-1/9.10.

FlexibleThe drives can be used both in the shaft (MRL) as well as in the machine room. The arrangement can be configured in 1:1 and 2:1 suspension. A design version of the brake with a manual venting lever is possible. Another option of the PMC series is a handwheel extension.

CompleteWe can provide you with the matching frequency inverter (MFR: with integrated power regene-ration; MFC: with braking resistor) in each case for our gearless drives, which feature all of the drive parameters required. In this way we guarantee fast, safe start-up. Optionally in plug&play version with integrated brake control, line filter, line inductor and contactors. In addition, we provide various machine frames, perfectly adapted to these drives. Special de-signs are available on request.

Smooth runningThe traction sheaves we use are precisely manufactured and supplied with hardened grooves. As a result we guarantee you a long service life, low vibrations and an extremely smooth running drive for your lift.

Compact The compact design is a significant advantage for using the drives in your systems.

ReliableDurable, sturdy construction, promising exceptionally long service life and availability and sustai-nable economic efficiency.

regenerat ion

PMC145-2 S-XS Page 4145-2 M-XM Page 5145-2 L-XL Page 6170 S-XL Page 7Machine base frame Page 14

DAFDAF 210M Page 8DAF 210L Page 9DAF 270S Page 10DAF 270M Page 11DAF 270L Page 12DAF 270XL Page 13Machine base frame Page 15

Leistungsbersicht Gearless DAF / PMC

Leistungsbereiche-Gearless_DAF-PMC_1-1_Darstellung_verkrzt.docx 13.10.2014

630 630

2:1

1:1

500

1000

1,0 1,5 2,0 2,5 3,0

1500

2000

2500

PMC145-2 S

PMC145-2 M PMC145-2 L

PMC145-2 XS

PMC145-2 XM

PMC145-2 XL

DAF210L

DAF270S

DAF270M

DAF270L/XL

1,0 1,5

500

1000

3,5 v [m/s] v [m/s]

Q [k

g]

Q [k

g]

PMC145-2 S

PMC145-2 M

PMC145-2 L

DAF 210M

DAF210M

DAF 210L

DAF210L

DAF270L/XL

DAF270M

DAF270M

PMC170

Leistungsbersicht Gearless DAF / PMC

Leistungsbereiche-Gearless_DAF-PMC_1-1_Darstellung_verkrzt.docx 13.10.2014

630 630

2:1

1:1

500

1000

1,0 1,5 2,0 2,5 3,0

1500

2000

2500

PMC145-2 S

PMC145-2 M PMC145-2 L

PMC145-2 XS

PMC145-2 XM

PMC145-2 XL

DAF210L

DAF270S

DAF270M

DAF270L/XL

1,0 1,5

500

1000

3,5 v [m/s] v [m/s]

Q [k

g]

Q [k

g]

PMC145-2 S

PMC145-2 M

PMC145-2 L

DAF 210M

DAF210M

DAF 210L

DAF210L

DAF270L/XL

DAF270M

DAF270M

PMC170

Performance matrix

In the diagrams the range of performance of the different machines are painted as an approximate value. For the exact assining of the machine we advise a technical calculation with the parameter of your installation. For this LEKalk is available.

4regenerat ion

PMC145-2S PMC145-2XS

Technical DataType of machine PMC145-2S PMC145-2XSSuspension r 1:1 2:1Rated Load Q [kg] 275 450Rated Speed max. v [m/s] 1,0 1,6Diameter of Traction Sheave DT [mm] 240Diameter of Ropes d [mm] 6Number of Grooves max. z 6 at groove clearance 12 mm / 7 at groove clearance 10 mmType of Groove seat groove, hardenedRated Power PN [kW] 1,59 2,8 4,4Rated Torque MN [Nm] 190 170 165permitted radial Shaft Load [kN] 14 15Weight [kg] 132 158Number of Switching Operations 120Duty Cycle % 50Rated Current IN [A] 8,4 7,5 9,9Output Factor cos 0,92 0,91 0,96

Version of Brake 2 x 250 Nm, 2-surface disc brake in double configuration (2 brake circuits)option: with manual release

Brake Monitoring 1 microswith per brake circuitProtection Class IP21

Frequency inverter typeMFR 5.5MFC 31-10 31-15

PMC145-2 S/XS

regenerat ion

Technical DataType of machine PMC145-2M PMC145-2XMSuspension r 1:1 2:1Rated Load Q [kg] 400 630Rated Speed max. v [m/s] 1,0 1,2 1,0 1,6 1,75Diameter of Traction Sheave DT [mm] 240 210 240 210 240Diameter of Ropes d [mm] 6Number of Grooves max. z 8 at groove clearance 12 mm / 9 at groove clearance 10 mmType of Groove seat groove, hardenedRated Power PN [kW] 2,38 2,72 2,86 3,91 3,9 6 6,9Rated Torque MN [Nm] 285 235 205 225 236permitted radial Shaft Load [kN] 18 19Weight [kg] 172 189Number of Switching Operations 180Duty Cycle % 40 50Rated Current IN [A] 11,5 9,5 8,3 14,8 15,6Output Factor cos 0,93 0,92 0,94 0,97 0,96

Version of Brake 2 x 350 Nm, 2-surface disc brake in double configuration (2 brake circuits)option: with manual release

Brake Monitoring 1 microswith per brake circuitProtection Class IP21

Frequency inverter typeMFR 5.5 7.5MFC 31-15

PMC145-2M PMC145-2XM

PMC145-2 M/XM

6regenerat ion

Technical DataType of machine PMC145-2L PMC145-2XLSuspension r 1:1 2:1Rated Load Q [kg] 630 1000Rated Speed max. v [m/s] 1,0 1,2 1,0 1,6 1,75Diameter of Traction Sheave DT [mm] 240 210 240 210 240Diameter of Ropes d [mm] 6Number of Grooves max. z 11 at groove clearance 12 mm / 13 at groove clearance 10 mmType of Groove seat groove, hardenedRated Power PN [kW] 3,69 4,2 4,42 6,01 6 9,4 10,2Rated Torque MN [Nm] 440 360 315 352 350permitted radial Shaft Load [kN] 32 30Weight [kg] 216 214 216 214 229Number of Switching Operations 180Duty Cycle % 40 50Rated Current IN [A] 18,3 14,9 13 24,7 24,6Output Factor cos 0,94 0,93 0,92 0,95 0,96

Version of Brake 2 x 550 Nm, 2-surface disc brake in double configuration (2 brake circuits)option: with manual release

Brake Monitoring 1 microswith per brake circuitProtection Class IP21

Frequency inverter typeMFR 7.5 18MFC 31-15 31-26

PMC145-2L PMC145-2XL

PMC145-2 L/XL

regenerat ion

Technical DataType of machine PMC170S PMC170M PMC170L PMC170XLSuspension r 2:1Rated Load Q [kg] 1050 1650Rated Speed max. v [m/s] 1,6 1,0 1,6 1,75 2,0Diameter of Traction Sheave DT [mm] 320Diameter of Ropes d [mm] 8Number of Grooves max. z 10Type of Groove seat / vee grooveRated Power PN [kW] 9,7 9,8 15,6 17,1 19,5Rated Torque MN [Nm] 485 781permitted radial Shaft Load [kN] 30 42 40 42Weight [kg] 381 423 448 492Number of Switching Operations 180 240Duty Cycle % 50Rated Current IN [A] 23 27 40 45Output Factor cos 0,95 0,94 0,95 0,94

Version of Brake 2 x 1200 Nm, 2-surface disc brake in double configurationoptional: with manual release

Brake Monitoring electrical releaseProtection Class IP21

Frequency inverter typeMFR 18 --MFC 31-26 31-40 31-60

PMC170 S - XL

Dimensions

L (mm) D (mm) E (mm) F (mm) H (mm) S (mm) G (kgs)

PMC170S 180 613 426 300 706 273 381

PMC170M 240 673 486 360 766 304 423

PMC170L 270 703 516 390 796 319 448

PMC170XL 330 763 576 450 856 350 492

8regenerat ion

Technical DataType of machine Gearless DAF210MSuspension r 1:1 2:1Rated Load Q [kg] 450 630 700 630 700 630 700 630Rated Speed max. v [m/s] 1,0 1,6 1,0 1,6 1,75 2,0Diameter of Traction Sheave DT [mm] 320 360 320 360 320 360 320 360Diameter of Ropes d [mm] 8 8 / 9 8 8 / 9 8 8 / 9 8 8 / 9Number of Grooves max. z 5 5 / 4 5 5 / 4 5 5 / 4 5 5 / 4Type of Groove seat / vee grooveRated Power PN [kW] 2,83 4,3 4,2 4,7 6,8 7,3 7,2 7,9 8,0Rated Torque MN [Nm] 450 430 378 380 382 365 370 360permitted radial Shaft Load [kN] 33 ( 75 1/min) / 37 (> 75 1/min)Weight [kg] 250Number of Switching Operations 240 180 240Duty Cycle % 50 60 50Rated Current IN [A] 12,5 12,0 10,5 16,1 16,2 17,4 15,4 17,2Output Factor cos 0,94 0,95 0,96 0,95

Version of Brake 2-surface disc brake in double configuration (2 brake circuits)Brake Monitoring 1 microswith per brake circuit

Protection Class IP54

Frequency inverter typeMFR 5.5 7.5MFC 31-15 31-26

DAF210M

regenerat ion

Technical DataType of machine DAF210LSuspension r 1:1 2:1Rated Load Q [kg] 630 630/900/1000/1125 630/900/1000/1125 1125 1000Rated Speed max. v [m/s] 1,0 1,6 1,0 1,6 1,75 2,0Diameter of Traction Sheave DT [mm] 320 520/400/360/320 520/400/360/320 320 360Diameter of Ropes d [mm] 8 8-13Number of Grooves max. z 7 5-8Type of Groove seat / vee grooveRated Power PN [kW] 4,10 5,75 4,7/5,9/6,6/6,5/7,5 7,4/9,5/10,5/11,5 11,3/12,4 12,5Rated Torque MN [Nm] 650 575 610/590/586/520/600 600/595/590/575 580/565 563permitted radial Shaft Load [kN] for 320-, 360- and 400-traction sheaves 38 ( 75 1/min) / 46 (> 75 1/min) for 520-traction sheaves 37 ( 75 1/min) / 41 (> 75 1/min)Weight [kg] 320/325/330Number of Switching Operations 240Duty Cycle % 50Rated Current IN [A] 16,0 14,0 15,4/15/15,2/13/16,8/23,4 23,4/23,2/23,0/25,5 25,7/25,1 25,0Output Factor cos 0,94 0,95 0,96/0,94/0,95 0,96/0,95/0,95 0,95/0,96 0,96

Version of Brake 2-surface disc brake in double configuration (2 brake circuits)option. with manual release

Brake Monitoring 1 microswith per brake circuitProtection Class IP54

Frequency inverter typeMFR 7.5 18MFC 31-15 31-26/40 31-40

DAF210L

10

regenerat ion

Technical DataType of machine DAF270SSuspension r 2:1Rated Load Q [kg] 1250Rated Speed max. v [m/s] 1,0 1,6 1,75 2,0 2,5Diameter of Traction Sheave DT [mm] 320Diameter of Ropes d [mm] 8Number of Grooves max. z 10Type of Groove seat / vee grooveRated Power PN [kW] 8 12,6 13,8 15 17,8Rated Torque MN [Nm] 640 630 600 570permitted radial Shaft Load [kN] 43,5Weight [kg] 475Number of Switching Operations [F/h] 240Duty Cycle [%] 50Rated Current IN [A] 23 30,7 29,2 27,8Output Factor cos 0,94 0,95 0,96

Lnge der Anschlukabel [m] 6 oder 10

Version of Brake 2-surface disc brake in double configuration 2x1700 Nmoption: with manual releaseBrake Monitoring 1 microswith per brake circuitProtection Class IP54

Frequency inverter typeMFR 18 --MFC 31-26 31-40 21-50R

DAF270S

regenerat ion

Technical DataType of machine DAF270MSuspension r 1:1 2:1Rated Load Q [kg] 900 800 1000 900 800 1000 1600 2000 1600 1350 1600 1250Rated Speed max. v [m/s] 1,0 1,6 1,0 1,6 1,75 2,0 2,5 3,0 3,5Diameter of Traction Sheave DT [mm] 440 320 440 320 320/440 440Diameter of Ropes d [mm] 8-11Number of Grooves max. z 7-9Type of Groove seat / vee grooveRated Power PN [kW] 5,4/7,4 7,8/10,6 10,7 11,4 15,3/14,9 16,3/16,7 18,2 19,5 21,6 21,3 24,8

Rated Torque MN [Nm] 1200/1175 1075/1050 1175 1250 1050/1025 1025/1050 1000 860 950 780permitted radial Shaft Load [kN] 43,5/58Weight [kg] 550/570Number of Switching Operations 180 240 180 240 180 240 180 240Duty Cycle % 40 50 40 50 40 50Rated Current IN [A] 27,5 24,5 24 25 22 30 24 25,5 30/35 35/30,5 38/29 41,5/28,5 31,4 31,2 36,5Output Factor cos 0,96 0,94 0,920,930,95 0,94 0,94 0,95/0,94 0,95 0,96/0,95 0,95/0,96 0,96

Version of Brake 2-surface disc brake in double configuration 2x1250 / 2x1700 Nmoption: with manual release

Brake Monitoring 1 microswith per brake circuit Protection Class IP54

Frequency inverter typeMFR 18 --MFC 31-26/40 31-26 31-40 31-60 21-50R

DAF270M

12

regenerat ion

Technical DataType of machine DAF270LSuspension r 1:1 2:1 3:1 4:1Rated Load Q [kg] 1100/1000 2000/2250/2500 2000 2200/2000 1800/2000 3000/4000/3400 4000Rated Speed max. v [m/s] 1,0/1,6 1,0 1,6 1,75 2,0 2,5 1,0/1,6 1,0Diameter of Traction Sheave DT [mm] 440 490/440 490 440/490 490/440 490/440 440

Diameter of Ropes d [mm] 8-11 8-12Number of Grooves max. z 7 6-10Type of Groove seat / vee grooveRated Power PN [kW] 6,6/10,1 11,7/12,8/14,6 18/20,4/23,3 20 24,6/22,5 26,5/30 17/22,5/30,5 25,1Rated Torque MN [Nm] 1475/1400 1433/1400/

14001375/1400/

16001400 1350/1375 1300/1325 1385/1650/

14001380

permitted radial Shaft Load [kN] 58Weight [kg] 730/740Number of Switching Operations 240 240/180 180 240 240/180 180Duty Cycle % 50 50/40 50 50/40 40Rated Current IN [A] 26/24,5 25/36/41/28 42,5/43,5/36/

50/4143,5 41,5/60/

35/6058/40/59 35/42,5/51,5/

6256

Output Factor cos 0,96 0,96/0,95 0,96/0,94 0,95 0,96 0,96/0,94 0,96

Version of Brake 2-surface disc brake in double configuration 2x1700option: with manual release

Brake Monitoring 1 microswith per brake circuitProtection Class IP54

Frequency inverter typeMFR 18 18 / -- -- 18 / --MFC 31-40 31-60 31-60 / 21-105

DAF270L

regenerat ion

Technical DataType of machine DAF270XLSuspension r 1:1 2:1 3:1 4:1Rated Load Q [kg] 1100/1000 1800/2000/2250/2500 2200 2000 4000/3400 4000Rated Speed max. v [m/s] 1,0/1,6 1,0 1,6 2,0 2,5 1,0/1,6 1,0Diameter of Traction Sheave DT [mm] 440 520*/440 440Diameter of Ropes d [mm] 8-11 8-13Number of Grooves max. z 7 6-10Type of Groove seat / vee grooveRated Power PN [kW] 6,6/10,1 12,2/12,8/14,6 17,3/20,4/23,3 24,6 30 22,5/30,5 25,1Rated Torque MN [Nm] 1475/1400 1400/1600 1350 1325 1650/1400 1380permitted radial Shaft Load [kN] 73Weight [kg] 770/780Number of Switching Operations 240 240/180 240 240/180 180Duty Cycle % 50 50/40 50 50/40 40Rated Current IN [A] 26/24,5 28/36/41/28 35/43,5/36/50/41 41,5/60 59 42,5/51,5/62 56Output Factor cos 0,96 0,95/0,96 0,96/0,94 0,96 0,93 0,94/0,96 0,96

Version of Brake 2-surface disc brake in double configuration 2x2200option: with manual release

Brake Monitoring 1 microswith per brake circuitProtection Class IP54

Frequency inverter typeMFR --MFC 31-40 31-60 31-60 21-105

*see product catalogue DAF270

DAF270XL

Option: with manual release

14

Technical DataFrame ModKit MO61 S* ModKit MO61 D4Machine PMC145-2 M, L M, L, XLSuspension r 1:1 2.1Rated load Q [kg] up to 675 up to 630 up to 1000Rated speed v [m/s] 1,0 up to 1,6Rope departure at drive flexible [mm] from 555 to 765 600 ASL 1400Diameter of traction sheave DT [mm] 210 / 240 240Diameter of ropes d [mm] 6Number of ropes max. 12Number of grooves max. z 12Type of groove seat / v-groovePulley diameter DT [mm] 240Vibration isolation elements YesIntegrated rope end fastening points, rope anchorages

No (1:1) Yes

Handwinding wheel, optional YesManual release, optional YesHoist Yes Pre-assemble machine base frame on stock Machine available from stock

*

Machine base frame for PMC - Gearless

Handrad/-lftung optional

ModKit MO61 S ModKit MO61 D4

ASL 555 - 765 mm

Machine base frame for DAF - Gearless

DAF210 on TW63 machine base frame

DAF270 on TW130 machine base frame

Technical DataFrame DAF210 on TW63

machine base frameDAF270 on TW130

machine base frameMachine DAF210M DAF210L DAF270S/M/LSuspension r 1:1ASL-dimension flexible* [mm] 481 - 1073 501 - 1097 522 - 1297Diameter of traction sheave DT [mm] 320 / 360 360 / 400 320 / 360 / 440Diameter of ropes d [mm] 8 / 10 8 / 10 / 11Vibration isolation elements YesAdapter plat YesRope guard optional YesManual release optional Yes

ASL-dimension is dependent on the traction sheave*

LiftEquip GmbH Elevator ComponentsBernhaeuser Strae 4573765 Neuhausen a.d.F., GermanyTel.: +49 (0) 71 58 12 - 2929Fax: +49 (0) 71 58 12 - 2971E-Mail: kontakt@liftequip.deInternet: www.liftequip.com

Version 03/2015

The details quoted in this Product Information can only be viewed as binding when confirmed expressly in writing. Re-production, reprint and storage only with authorisation of the

editor.

Colouring

RAL 7021 Black grey

New colour for gearless machines for deliveries from 2015

LiftEquip is changing for deliveries from 2015 the paintwork of gearless machines to the environmentally friendly hydro-paint in the colour RAL 7021 (Black grey).

Advantages of the new hydro-paint: Two-component water-based paint with higher impact strength Complies with the VOC Directive (Volatile Organic Compounds) and thus very environ- mentally compatible Resistant to solvents, alkaline solutions and synthetic oils

RAL 7005 Mouse grey

Colour of the machine base frames

The machine base frames will continue to be supplied with a high-quality powder coa-ting in a colour similar to RAL 7005 (Mouse grey). A polyester epoxy powder mix with a coating thickness of approx. 60 m is used. Galvanised add-on parts are not painted.

This changeover means that the gearless machine and the optional machine base frame will consistently have a technologi-cally superior and environmentally compa-tible surface coating. It will also lend the entire drive unit an even more attractive appearance.