gears trains - wifistudy.com · gears trains. need of gear train. types of gear train. simple gear...
TRANSCRIPT
Gears Trains
Gears Trains
Need of Gear Train
Types of Gear Train
Simple Gear Train
Compound Gear Train
.
Reverted Gear Train
When the axes of the first gear (i.e. first driver)and the last gear (i.e. last driven or follower) are co-axial,then the gear train is known as reverted gear train
Reverted Gear Train
Reverted Gear Train
Reverted Gear Train
Epicyclic Gear Train
Epicyclic Gear Train
Epicyclic Gear Train
Compound Epicyclic Gear Train—Sun and Planet Gear
(a) 20 rpm
(b) 27𝟑
𝟏𝟏rpm
(c) 19𝟕
𝟏𝟏rpm
(d) 100 rpm
A single epicyclic gear train is shown in the given figure. Wheel A isstationary. If the number of teeth on A and B are 120 and 45 respectively,then when B rotates about its own axis at 100 rpm, the speed of C would be
(a) 12
(b) 15
(c) 18
(d) 24
In the epicyclic gear train shown in the given figure, A is fixed. A has 100teeth and B has 20 teeth. If the arm C makes three revolutions, the numberof revolutions made by B will be
(A) 0 rpm (B) 20 rpm
(C) 33.33 rpm (D)66.67 rpm
The sun gear in the figure is driven clockwise at 100 rpm. The ring gear is heldstationary. the number of teeth on sun gear is 20, on planet gear is 30 and onring gear is 80 shown on the gears, the arm rotates at
Arm
Planet 30T
(a) 10 rpm ccw
(b) 10 rpm cw
(c) 12 rpm ccw
(d) 12 rpm cw
An epicyclic gear train is shown schematically in the adjacent figure. The sungear 2 on the input shaft is a 20 teeth external gear. The planet gear 3 is a 40teeth external gear. The ring gear 5 is a 100 teeth internal gear. The ring gear5 is fixed and the gear 2 is rotating at 60 rpm (ccw = counter-clockwise andcw = clockwise). The arm 4 attached to the output shaft will rotate at