geekmatica howto car2pc install in 2000 e46 bmw 323i

Geekmatica - HOWTO: Car2PC Install in 2000 E46 BMW 323i http://www.geekmatica.com/modules.php?name=News&file=article&sid=23

1 of 13 04.05.2007 08:40

Search Topics All Topics 6All Topics

Create an account Home Topics Downloads Your Account Submit News Top 10 May 4, 2007

Modules

Home

Feedback

Journal

OmniFi

Private Messages

Recommend Us

Search

Statistics

Stories Archive

Submit News

Top 10

Topics

Web Links

Your Account

Who's Online

There are currently, 5

guest(s) and 0 member(s)

that are online.

You are Anonymous user.

You can register for free

by clicking here

Languages

Select Interface Language:

English 6English

HOWTO: Car2PC Install in 2000 E46 BMW 323iPosted on Monday, November 07 @ 10:39:54 PST by lincomatic

I recently found out about the Car2PC line of USB to head unit (HU) adapters from indashpc.org.

They allow you to interface your Car PC or other USB-compatible device to your head unit. The

Car2PC emulates a CD changer. It supplies an aux in for your analog audio input, and a USB

interface to allow you to read the HU btns from your computer. While it's kind of pricey, it's not

much more expensive than other CD changer emulators, and gives you the USB interface as well.

I decided to use this device to interface my Omnifi DMP1 MP3 player to my head unit and steering

wheel buttons. The idea is to be able switch tracks with the steering wheel buttons of my Bimmer,

and maybe add some shortcuts to playlists, etc via the HU's buttons. Since Openfi,a replacement

firmware for the DMP1 is open source, it was possible to add the functionality to the DMP1.

My E46 2000 BMW 323i has the stock BMW Business cassette player head unit installed, which uses IBUS.

Therefore, I obtained the Car2PC-USB adapter. There is also a model available for MBUS-compatible HU's, and

Toyota/Lexus/Honda/Acura support is in beta testing. Here is what the unit looks like:

The 4 thin wires go to the head unit for power/ground, and IBUS connection. The black 10-pin connector is for CD

changer emulation. Audio input is via a 1/8" stereo miniplug, and USB connector goes to your PC or other

USB-compatible device. On the host side, the device looks like a USB->Serial adapter. There are two ways to

program it: VCP (virtual comm port) mode, and FT (FTDI mode). I will be getting into more specifics in a future

programming article.

At this point, I've already crimped on the connectors. The wire with the red wrap is twisted together with the

unmarked wire before crimping.

The first step in removing the radio is to pry off the dash trim on the right:

Login

Nickname

Password

Login

Don't have an account yet?

You can create one. As a

registered user you have

some advantages like

theme manager,

comments configuration

and post comments with

your name.

Related Links

More about Audio & Video Tips

News by lincomatic

Most read story about

Audio & Video Tips:

HOWTO: Car2PC Install in

2000 E46 BMW 323i

Article Rating

Average Score: 5

Votes: 6

Please take a second and

vote for this article:

nmlkj

nmlkj

Continuous screenchangerExtrude without interruption ? Get a quote ! www.cofit.com

Pneumatic ComponentsFree catalogs online & by mail. Free 2D/3D Models. Immediate Quote. www.techno-sommer.com

BlitzSafe HON/AUX DMX V1BlitzSafe Audio Input $59.99 enfig.com

DVD player for your car$149 DVD Get one today and pimp it Touch screen, Nav, GPS, multi zone www.tadibrothers.com


2 of 13 04.05.2007 08:40

Use a suitable flat plastic blade to pry it loose, then pull it straight out. I just wrapped my flat-bladed screwdriver

with electrical tape. Here is what the dash looks like with it removed:

Note that there are 3 pink plastic receivers for the 3 pegs which protrude from the back of the trim (in my photo,

the rightmost one is missing). Here is a backside view of the right side trim. Note the 3 large securing pegs:

nmlkj

nmlkj

nmlkj

Cast my Vote!

Options

Printer Friendly

Send to a Friend


3 of 13 04.05.2007 08:40

Next, pry up the center trim from the right side:

This is the backside of the center trim:


4 of 13 04.05.2007 08:40

With the center trim removed, there are 2 screws exposed, one on each side of the head unit. Mine were just

Philips head, but I've heard that some cars have Allen or Torx screws.

Remove the screws, and pull out your head unit:


5 of 13 04.05.2007 08:40

What's nice is these newer head units don't need to have the code entered when you reconnect the power, so that's

one less nuisance to deal with. Here is what the back of the head unit looks like:

Pry up on the black harness connector to pop it off:


6 of 13 04.05.2007 08:40

Here is the connector:

and the plug:


7 of 13 04.05.2007 08:40

If you have a CD changer harness attached to the plug, you will need to remove it, because the audio input

connector connects in its place. Pull out the blue clip to release it:

T-Taps are supplied with the Car2PC to connect into the harness:


8 of 13 04.05.2007 08:40

Crimp them on to the following wires:

Function Car2PC Harness

GND Black Brown 15

+12V Red Red/Green stripe 9

IBUS Blue White/Red stripe 7

Be extra careful with the IBUS wire ... it's rather thin gauge, and I had to crimp T-Tap may not get a good tight

connection unless you first tighten it up before crimping it on.


9 of 13 04.05.2007 08:40

Make sure you have good solid connections by testing them with a continuity tester:

Snap the black harness connector back on to the back of the HU. Here is a closeup of the 10-pin audio connector:


10 of 13 04.05.2007 08:40

It connects to where the CD changer's 10-pin harness used to be. Make sure the silver stripe part is on top, and

insert it firmly:

At this point, you should turn on the HU. Press the CD button. If all the connections are good, you should see it

switch to CD changer mode:


11 of 13 04.05.2007 08:40

Notice that at this point, my cassette audio adapter is gone (goodbye, Coby cassette adapter... you served me well,

but the constant grinding of your gears was too noisy at traffic lights). Connect an audio source to the mini phone

plug jack and see if you are getting audio. You might want to run the supplied Winamp plugin with your PC, as well,

to make sure everything is working as expected before you start putting everything back together. The Car2PC unit

fits inside the dash, but the most difficult part of the install is getting it to fit in. I crammed it behind the bracket

that receives the big center pin in the rear of the HU. Next, you need to get the USB and audio input wires into your

glove box. Open your glove box. There are two tabs, one on each side, on the top:

Twist the tabs a quarter turn, and the fuse box door will swing down. I used a pair of nabbergrabbers purchased

from a 99 Cent store to pull the wires through. Feed in the nabbergrabber from the top left of the fuse box

compartment:


12 of 13 04.05.2007 08:40

and then pull each wire through to the glove box:

There is enough space on the left side of the fuse box door to allow you to close it when the wires are coming

through:


13 of 13 04.05.2007 08:40

Push your radio back in, replace the two securing screws, and reattach the two dash trim pieces. Your install is

done!

I will be posting the code for installing my Openfi to Car2PC interface in the next few days. It allows your HU and

steering wheel buttons to control your Omnfifi DMP1!

Associated Topics

Re: HOWTO: Car2PC Install in 2000 E46 BMW 323i (Score: 1)

by Scott_H on Tuesday, January 10 @ 17:28:34 PST

(User Info | Send a Message)

Hey, i was just wondering if you hadthe full pin diagram of the headunit plug. You labeled a few of the pins

(http://www.geekmatica.com/car2pc/scheme_ibus.gif), but i need to know all of them, think you can help me out?

Re: HOWTO: Car2PC Install in 2000 E46 BMW 323i by lincomatic on Tuesday, February 28 @ 21:57:24 PST

All logos and trademarks in this site are property of their respective owner. The comments are property of their posters, all the rest ? 2005 by lincomatic.

You can syndicate our news using backend.php

PHP-Nuke Copyright 2004 by Francisco Burzi. This is free software, and you may redistribute it under the GPL. PHP-Nuke comes with absolutely no warranty, for details, see the

license.

geekmatica howto car2pc install in 2000 e46 bmw 323i

Documents

usb interface

e46 bmw

car2pcusb adapter

car2pc line of usb

usb connector

search topics

account home topics

audio video tips news