general abstract name of the work: providing street light ... t.no.65.pdf · 3 foundation...

54
GST 12% on Sub Total Construction of AO Block with water supply, Sanitation, Electrical arrangements and compound wall at SIPCOT Industrial Growth Centre, Gangaikondan in Tirunelveli District. GST 12% on Sub Total Sl.No. Description of work Amount (Rs.) I Providing Street light arrangements to the internal roads and high mast light arrangements to the junction at SIPCOT Industrial Growth Centre, Gangaikondan II General Abstract NAME OF THE WORK: Providing Street light arrangements to the internal roads and high mast light arrangements, construction of AO Block building and compound wall at SIPCOT Industrial Growth Centre, Gangaikondan in Tirunelveli District. EMD : Rs.2,27,500/- Tender Date : 10.04.2020 Overall Sub Total GRAND TOTAL (Rupees__________________________________________________________________________________only) CONTRACTOR No. of Corrections:............. No. of Overwritings:...........

Upload: others

Post on 13-May-2020

0 views

Category:

Documents


0 download

TRANSCRIPT

GST 12% on Sub Total

Construction of AO Block with water supply, Sanitation, Electrical arrangements and

compound wall at SIPCOT Industrial Growth Centre, Gangaikondan in Tirunelveli

District.

GST 12% on Sub Total

Sl.No. Description of work Amount (Rs.)

I Providing Street light arrangements to the internal roads and high mast light

arrangements to the junction at SIPCOT Industrial Growth Centre, Gangaikondan

II

General Abstract

NAME OF THE WORK: Providing Street light arrangements to the internal roads and high mast light arrangements, construction of AO Block

building and compound wall at SIPCOT Industrial Growth Centre, Gangaikondan in Tirunelveli District.

EMD :

Rs.2,27,500/-

Tender Date : 10.04.2020

Overall Sub Total

GRAND TOTAL

(Rupees__________________________________________________________________________________only)

CONTRACTORNo. of Corrections:.............

No. of Overwritings:...........

Sl.No. Qty. Description of item TNBP

No.

Rate both in

figures and in

words

(Rs.)

Unit Amount

(Rs.)

1 2 3 4 5 6 7

1 Supply, and delivery of 10 meter height GI steel Tubular pole

with single bracket made up of 3 section of GT pipe with 5.20

mtr length of 139.70mm dia and 4.50mm thick and 2.40m length

of 114.3mm dia and 4.50mm thick and 2.40m length of

88.90mm dia and 3.25mm thick compete with MS base plate of

size 300 x 300 x 6mm at the bottom. The pole shall be provided

with a suitable arms for mounting 120w LED Modular type street

light luminarie.a 433 Nos

(Four hundred

and thirty three

numbers only)

For Single collar pole 1 No

(Each)

I. Providing Street light arrangements to the internal roads and high mast light arrangements to the junction at SIPCOT Industrial Growth Centre,

Gangaikondan

I. Street light arrangements

CONTRACTORNo. of Corrections:.............

No. of Overwritings:...........

Sl.No. Qty. Description of item TNBP

No.

Rate both in

figures and in

words

(Rs.)

Unit Amount

(Rs.)

1 2 3 4 5 6 7

2 Supply, installation, testing and commissioning of following

capacity of LED street lights(make like crompton/Bajaj/Philips)

consisting of separate optical and control gear, having IP 65 or

better rating, enclosure made of pressure die casting aluminum

having toughned glass, Input voltage range of 90 to 270 V AC

and Input frequency range of 47 to 63 HZ, PF > 0.9 (lag),

external surge protection up to 10 K.V. It shall have CRI > 70

and color temperature range between 3000 - 6000 deg K.LED

chips shall be high power 1 W CREE/ NICHIA OR equivalent

having efficiency of not less than 100 lumens / watt and junction

temp. not exceeding 85 Deg celsius with life of 50000 hours

having warranty not less than 5 years. LEDs should be arranged

in combination of series and parallel connections: power

electronic circuits shall have protection for short circuit , over

voltage, over current and over temperature. Thickness of the

fixtures not to exceed 70mm, weight shall not exceed 8 kg etc.,

the fixtures shall be conforming to Indian standards or

International standards CE / UL etc., and all materials used in

manufacture shall be RoHS compliant etc., complete Including

dismantling of Existing fittings and as directed by SIPCOT

Officers.

b 433 Nos

(Four hundred

and thirty three

numbers only)

120 W LED fiitings 1 No

(Each)

CONTRACTORNo. of Corrections:.............

No. of Overwritings:...........

Sl.No. Qty. Description of item TNBP

No.

Rate both in

figures and in

words

(Rs.)

Unit Amount

(Rs.)

1 2 3 4 5 6 7

3 Foundation arrangements to the street light poles as per the

following provisions

a 605 Cum

(Six hundred and

five cubic metre

only)

Earth work excavation for foundation of Street light poles and

high mast light poles in all classes of soils such as hard stiff clay,

stiff black cotton soil, hard red earth, shales, murram, gravel,

stoney earth and earth mixed with small size boulders etc.

except hard rock requiring blasting as per SS 20-B (HGS

SS.20.B.) and depositing the same to the low laying

area/median/foot path portion(only good earth to be deposited in

median and foot path portion for the required quantity as

directed by engineer incharge with initial lead of 10m and lift of

2m etc., complete as per standard specification and as directed

by the SIPCOT officers.

1 Cum

(One cubic

metre)

b 115 Cum

(One hundred

and fifteen cubic

metre only)

Providing Plain Cement Concrete 1:4:8 (One cement, Four sand

and eight aggregate) using 40mm size Hard broken granite stone

jelly for foundation concrete of streel light poles and high mast

light poles etc., laid in layers not exceeding 15cm thick including

dewatering wherever necessary wall rammed, consolidated etc.,

complete complying including cost and conveyance of all

materials and labour to work site, mixing of concrete, laying,

compacting, curing with all leads for soft potable water, hire and

fuel charges for all tools and plants including all other incidental

charges such as bailing out water for forming protective bunds,

coffer dams and shoring, strutting etc. complete complying with

standard specifications and as directed by "SIPCOT" officers.

1 Cum

(One cubic

metre)

CONTRACTORNo. of Corrections:.............

No. of Overwritings:...........

Sl.No. Qty. Description of item TNBP

No.

Rate both in

figures and in

words

(Rs.)

Unit Amount

(Rs.)

1 2 3 4 5 6 7

c 245 Cum

(Two hundred

and fourty five

cubic metre only)

Reinforced Cement Concrete 1: 1 1/2 : 3 (One cement, One and

a half sand and three jelly) using Machine crushed 20mm size

Hard Broken granite ISS stone Jelly for all "REINFORCED

CEMENT CONCRETE WORKS" including cost and conveyance of

all materials and labour to work site excluding cost of centering,

shuttering, strutting and cost of MS / RTS Reinforcement grills

placed in position but including machine mixing of concrete,

laying, vibrating with mechanical vibrators, finishing, curing,

including cost of soft potable water treatment of bearing [(i.e.)

Junction of walls / beams and slabs] smooth with cement mortar

1:3 (One cement and Three sand) and kraft paper laid over it

without claim for extra and and all labour charges for mixing

concrete, laying, curing, vibrating charges, hire charges for all

tools and plants and all other incidental charges etc. and

providing weap holes at 1m interval including cost of PVC pipes if

required as directed by SIPCOT officers etc. complete complying

with standard specifications and as directed by "SIPCOT"

officers.For foundation and basement.

1 Cum

(One cubic

metre)

CONTRACTORNo. of Corrections:.............

No. of Overwritings:...........

Sl.No. Qty. Description of item TNBP

No.

Rate both in

figures and in

words

(Rs.)

Unit Amount

(Rs.)

1 2 3 4 5 6 7

d 1635 Sqm

(One thousand

six hundred and

thirty five square

metre only)

Supplying and erecting steel centering for sides and soffits

including supports and strutting for all concrete works in all floors

using mild steel BG 10 sheets of size 90 cm x 60 cm stiffened

with welded mild steel angles of size 25mm x 25mm x 3mm for

boarding laid over silver oak (country wood) joists of size 10cm x

6.5cm spaced at about 90cm centre to centre and supported by

casurina props of 10 cm to 13cm dia spaced at 75cm centre to

centre etc., Complete complying with standard specification and

as directed by SIPCOT Officers.

1 Sqm

(One square

metre)

e 245 Qtl

(Two hundred

and fourty five

quintal only)

Supplying, fabricating and placing in position of RTS grills for

reinforcement for various members including cost of steel,binding

wire and labour charges for all RCC works etc., complete as per

standard specifications and as directed by SIPCOT Officials.

1 Qtl

(One quintal

only)

4 3 Nos

(Three numbers

only)

Supply and fixing 3 Nos of 200 A Aerial fuse carrier fixing in a

teak wood board and laying 3½ x 70 Sqm U.G. cable inside the 2

½ dia G.I Pipe with suitable clamping the pipe in the E.B pole to

service connection pillar box. Supply & fixing 200 A 3 Nos of

Aerial fuse carrier fixing in teakwood board with necessary

clamps etc.,.

1 No

(Each)

CONTRACTORNo. of Corrections:.............

No. of Overwritings:...........

Sl.No. Qty. Description of item TNBP

No.

Rate both in

figures and in

words

(Rs.)

Unit Amount

(Rs.)

1 2 3 4 5 6 7

5 3 Nos

(Three numbers

only)

Supply, installation, testing and commissioning of outdoor street

lighting distribution pillar made out of 16SWG sheet steel metal

incorporated with 1 No 100 amps TPN rewirable fuse switch and

32A 6way fuse DB provided with 440V coil and 1 No 63 amps TP

conductor with 440V coil and 1 No. 24Hrs timer of L&T make with

its control wiring power interconnection with 7/16 copper wire

from main switch to contactor and contactor to fuse DB pillar

fabricated with front double door arrangements with locking

facility painted with 1 coat of primer and 2 coats of aluminium

finish. The pillar to be erected with suitable angle iron frame

pedestal with concrete grouting etc. complete and as directed by

SIPCOT officers.

1 No

(Each)

6 3 Nos

(Three numbers

only)

Supply and fixing of TNEB meter board suitable for 3 phases 200

A service connection made up of suitable angle iron frame work

of size 3 feet x 2 using angle iron of size 1½ x 1½ x 1¼ rigidly

fixed on wall covered with hylem sheet of size 3 feet x 2 feet of

12mm thickness with necessary bolts and nuts supports and

supply and fixing of 3 Nos 200 A fuse units 500V 1 No Neutralink

copper earth flat of size 1 1 ¼" with inter connection of EB meter

to fuse units by 19/16 PVC insulated copper wire with earth

connection complete. SD-131 2019-20.

1 No

(Each)

CONTRACTORNo. of Corrections:.............

No. of Overwritings:...........

Sl.No. Qty. Description of item TNBP

No.

Rate both in

figures and in

words

(Rs.)

Unit Amount

(Rs.)

1 2 3 4 5 6 7

7 150 RM

(One hundred

and fifty running

metre only)

Supplying,laying and jointing of the following size of PVC

armoured LTUG cable with ISI mark in a trench to be excavated

at adepth of 0.75m, and routing the cable into the 90mm dia.

HDPE Pipes and laying the cable into the trunch and refilling the

earth to make good etc. including cost and conveyance of all

materials and labour including pedestal concrete and angle iron

frame pedestal etc. complete and as directed by SIPCOT

Officials.(Excluding the cost of HDPE pipes and laying the same

into trenches will be extra)3.5core x 70sq.mm PVC .Armoured

LTUG Aluminium cable

1 Rm

(One running

metre)

8 33000 Rm

(Thirty three

thousand running

metre only)

Supplying,laying and jointing of the following size of PVC

armoured LTUG cable with ISI mark in a trench to be excavated

at adepth of 0.75m, and routing the cable into the 50mm dia.

HDPE Pipes and laying the cable into the trench and refilling the

earth to make good etc. including cost and conveyance of all

materials and labour including pedestal concrete and angle iron

frame pedestal etc. complete and as directed by SIPCOT

Officials.(Excluding the cost of HDPE pipes and laying the same

into trenches will be extra)2core x 25sq.mm PVC .Armoured

LTUG Aluminium cable

1 Rm

(One running

metre)

9 6070 Rm

(Six thousand

and seventy

running metre

only)

Supplying, laying, jointing and testing of 2 corex1.50 sq.mm PVC

insulated Sc unsheathed Cu.cable conductor cable of 1100V

grade with necessary jointing materials etc., complete including

cost and conveyance of cable and labou charges for laying the

cable etc. complete and as directed by SIPCOT Officials.

CONTRACTORNo. of Corrections:.............

No. of Overwritings:...........

Sl.No. Qty. Description of item TNBP

No.

Rate both in

figures and in

words

(Rs.)

Unit Amount

(Rs.)

1 2 3 4 5 6 7

10 3 Nos

(Three numbers

only)

Earthing as per ISI specification with an earth elctrode of 2.10 m

class "B" GI Pipe of dia not less than 40 mm with copper earth

plate of size 125 mm x 50 mm x 6 mm with necessary funneling

arrangements with necesssary masonry work and with 38 mm

RCC cover slab for the brick masonry etc complete with

appropriate specification / standards and as directed by SIPCOT

Officers.

1 No

(Each)

11 433 Nos

(Four hundred

and thirty three

numbers only)

Coil earth to street light poles with 8 SWG GI wire of 11.50mts

cof length in which 10mts of total length compressed in to a coil

of one metre length connected suitable with hexagonal earth bolt

of size 8mmx25mm welded on the pole at one end with a coil

position fixed on the earth etc. complete complying with

appropriate specification / standards and as directed by SIPCOT

Officers etc. complete.

1 No

(Each)

12 600 Rm

(Six hundred

running metre)

Supply,delivery and laying of 90mm dia. HDPE pipes including

cost and laying charges into trenches etc. complete complying

with appropriate specification / standards and as directed by

SIPCOT Officers etc. complete.

1 Rm

(One running

metre)

13 435 Rm

(Four hundred

and thirty five

running metre

only)

Supply,delivery and laying of 50mm dia. GI pipes including cost

and laying charges into pole pillars for connecting cable into

poles etc. complete complying with appropriate specification /

standards and as directed by SIPCOT Officers etc. complete.

1 Rm

(One running

metre)

CONTRACTORNo. of Corrections:.............

No. of Overwritings:...........

Sl.No. Qty. Description of item TNBP

No.

Rate both in

figures and in

words

(Rs.)

Unit Amount

(Rs.)

1 2 3 4 5 6 7

14 33000 Rm

(Thirty three

thousand running

metre only)

Supplying,deliverying and laying of 50mm dia HDPE pipes

including cost and laying charges into truenches etc., complete

complying with appropriate specification / standards and as

directed by SIPCOT Officers etc. complete. 2core x 25sq.mm

PVC .Armoured LTUG Aluminium cable

1 Rm

(One running

metre)

Section I-14 items (Fourteen items only) Sub Total

CONTRACTORNo. of Corrections:.............

No. of Overwritings:...........

Sl.No. Qty. Description of item TNBP

No.

Rate both in

figures and in

words

(Rs.)

Unit Amount

(Rs.)

1 2 3 4 5 6 7

1 4 Nos

(Four numbers

only)

Supply of 12.50 meter high mast for wind velocity 160Kmph,

having individual length of 6.5 meters, 3mm thick bottom and

top section, bottom diameter 300mm and top 150mm, having

galvanizing thickness of average 70 micron for bottom and top

sections, with accessories like motor, double drum winch of gear

ration 50:1, trailing cable 5 core 2.5sq.mm, 6mm SS wire rope,

head frame, lantern ring, lighting finial suitable for 6 Nos 300w

flood light but without floot light rate etc,.Complete complying

with standard specification and as directed by the SIPCOT

officers.

1 No

(Each)

2 4 Nos

(Four numbers

only)

Supply of foundation bolts of M24 size having length 750 mm 6

Nos of bolt per mast made of TOR steetl having galvanized on

the threaded portion of the bolt etc. complete complying with

appropriate specification / standards and as directed by SIPCOT

Officers etc. complete.

1 No

(Each)

3 24 Nos

(Twenty four

number only)

Supply and fixing of 300 watts of LED flood light with innovative

thermal management with multiple optics and equipped with IP

66 protection vide cat ref:LSFO-300-CDL/60 with 5 year

warranty 6 nos per mast considered etc,.Complete complying

with standard specification and as directed by the SIPCOT

officers.

1 No

(Each)

4 4 Nos

(Four numbers

only)

Supply of TWIN dome aviation obstruction lights with two nos of

100 W GLS lamps of approved make etc.,Complete complying

with standard specification and as directed by the SIPCOT

officers.

1 No

(Each)

II. High Mast arrangements

CONTRACTORNo. of Corrections:.............

No. of Overwritings:...........

Sl.No. Qty. Description of item TNBP

No.

Rate both in

figures and in

words

(Rs.)

Unit Amount

(Rs.)

1 2 3 4 5 6 7

5 Foundation arrangements to the High mast light poles as per the

following provisionsa 9 Cum

(Nine cubic

metre only)

Earth work excavation for foundation of Street light poles and

high mast light poles in all classes of soils such as hard stiff clay,

stiff black cotton soil, hard red earth, shales, murram, gravel,

stoney earth and earth mixed with small size boulders etc.

except hard rock requiring blasting as per SS 20-B (HGS

SS.20.B.) and depositing the same to the low laying

area/median/foot path portion(only good earth to be deposited in

median and foot path portion for the required quantity as

directed by engineer incharge with initial lead of 10m and lift of

2m etc., complete as per standard specification and as directed

by the SIPCOT officers.

1 Cum

(One cubic

metre)

b 1.50 Cum

(One point five

zero cubic metre

only)

Providing Plain Cement Concrete 1:4:8 (One cement, Four sand

and eight aggregate) using 40mm size Hard broken granite stone

jelly for foundation concrete of streel light poles and high mast

light poles etc., laid in layers not exceeding 15cm thick including

dewatering wherever necessary wall rammed, consolidated etc.,

complete complying including cost and conveyance of all

materials and labour to work site, mixing of concrete, laying,

compacting, curing with all leads for soft potable water, hire and

fuel charges for all tools and plants including all other incidental

charges such as bailing out water for forming protective bunds,

coffer dams and shoring, strutting etc. complete complying with

standard specifications and as directed by "SIPCOT" officers.

1 Cum

(One cubic

metre)

CONTRACTORNo. of Corrections:.............

No. of Overwritings:...........

Sl.No. Qty. Description of item TNBP

No.

Rate both in

figures and in

words

(Rs.)

Unit Amount

(Rs.)

1 2 3 4 5 6 7

c 9 Cum

(Nine cubic

metre only)

Reinforced Cement Concrete 1: 1 1/2 : 3 (One cement, One and

a half sand and three jelly) using Machine crushed 20mm size

Hard Broken granite ISS stone Jelly for all "REINFORCED

CEMENT CONCRETE WORKS" including cost and conveyance of

all materials and labour to work site excluding cost of centering,

shuttering, strutting and cost of MS / RTS Reinforcement grills

placed in position but including machine mixing of concrete,

laying, vibrating with mechanical vibrators, finishing, curing,

including cost of soft potable water treatment of bearing [(i.e.)

Junction of walls / beams and slabs] smooth with cement mortar

1:3 (One cement and Three sand) and kraft paper laid over it

without claim for extra and and all labour charges for mixing

concrete, laying, curing, vibrating charges, hire charges for all

tools and plants and all other incidental charges etc. and

providing weap holes at 1m interval including cost of PVC pipes if

required as directed by SIPCOT officers etc. complete complying

with standard specifications and as directed by "SIPCOT"

officers.For foundation and basement.

1 Cum

(One cubic

metre)

CONTRACTORNo. of Corrections:.............

No. of Overwritings:...........

Sl.No. Qty. Description of item TNBP

No.

Rate both in

figures and in

words

(Rs.)

Unit Amount

(Rs.)

1 2 3 4 5 6 7

d 35 Sqm

(Thirty five

square metre

only)

Supplying and erecting form work for steel centering for sides

and soffits including supports and strutting upto a height of

3.90m in all floors for RCC slabs, beams TEE or EL beams,

lintels, stair case beams, side walls etc., with all cross bracings

using mild steel BG 10 sheets of size 90 cm x 60 cm stiffened

with welded mild steel angles of size 25mm x 25mm x 3mm laid

over silver oak (country wood) joists of size 10cm x 6.5cm

spaced at about 90cm centre to centre and supported by

casurina props of 10 cm to 13cm dia spaced at 75cm centre to

centre etc., Complete complying with standard specification and

as directed by SIPCOT Officers.For vertical surfaces. such as RCC

wall, facia, fins, drops etc.,

1 Sqm

(One square

metre)

e 2.50 Qtl

(Two point five

zero quintal only)

Supplying, Fabricating and placing in position steel reinforcement

grills using M.S. / R.T.S. rods of all sizes of reinforcement for all

Reinforced cement concrete works (for pedestal pillar concrete)

including cost and conveyance of steel, binding wire,spacer bars,

cover blocks, labour charges for unbending of rods, straighteing,

cutting, fabricating, tying, lifting, placing in position, overlaping

to the required length whereever necessary cover blocks and all

other incidental charges etc. complete complying with standard

specifications and as directed by "SIPCOT" officers. (The steel

rods must be Fe 415 grade of any brand with ISI marking and

necessary test certicate to be produced before using it at site)

1 Qtl

(One Quintal)

CONTRACTORNo. of Corrections:.............

No. of Overwritings:...........

Sl.No. Qty. Description of item TNBP

No.

Rate both in

figures and in

words

(Rs.)

Unit Amount

(Rs.)

1 2 3 4 5 6 7

6 4 Nos

(Four numbers

only)

Erection of the high mast with the help of crane and hydra,

wiring of light fittings, PVC sheathed wiring with all wiring

materials like PVC sheathed flexible cable of suitabe copper

conductor cores of 1.5sq.mm, lugs and labour etc.,. Complete

and as directed by SIPCOT officers.

1 No

(Each)

7 8 Nos

(Eight number

only)

Provision of GI pipe earthing - 2 Nos per High mast with 2.50 M

long 40mm dia GI pipe including connection to High mast earth

terminal with 25x3 mm GI flats with all materials and labour. as

directed by SIPCOT officers.

1 No

(Each)

8 8 Nos

(Eight number

only)

Supplying and fixing of the following UG brass cable gland 3 1/2

x 35 Sq.mm AI.Ar with connection and cable fixing in the MS

switch board of the pole and pillar box main etc., Complete

Complying to appropriate specification / standard and as per

directed by the SIPCOT Officers.

1 No

(Each)

9 1500 Rm

(One thousand

five hundred

Running metre

only)

Supplying,laying and jointing of the following size of PVC

armoured LTUG cable with ISI mark in a trench to be excavated

at adepth of 0.75m, and routing the cable into the 50mm dia.

HDPE Pipes and laying the cable into the trunch and refilling the

earth to make good etc. including cost and conveyance of all

materials and labour including pedestal concrete and angle iron

frame pedestal etc. complete and as directed by SIPCOT

Officials.(Excluding the cost of HDPE pipes and laying the same

into trenches will be extra) 3.5core x 35sq.mm PVC .Armoured

LTUG Aluminium cable

1 Rm

(One running

metre)

CONTRACTORNo. of Corrections:.............

No. of Overwritings:...........

Sl.No. Qty. Description of item TNBP

No.

Rate both in

figures and in

words

(Rs.)

Unit Amount

(Rs.)

1 2 3 4 5 6 7

10 1500 Rm

(One thousand

five hundred

Running metre

only)

Supplying,deliverying and laying of 50mm dia HDPE pipes

including cost and laying charges into truenches etc., complete

complying with appropriate specification / standards and as

directed by SIPCOT Officers etc. complete. 3.5core x 35sq.mm

PVC .Armoured LTUG Aluminium cable

1 Rm

(One running

metre)

Section II-10 items (Ten items only) Sub Total

CONTRACTORNo. of Corrections:.............

No. of Overwritings:...........

Sl.No. Qty. Description of item TNBP

No.

Rate both in

figures and in

words

(Rs.)

Unit Amount

(Rs.)

1 2 3 4 5 6 7

1 Earth work Excavation for foundation in hard stiff clay, stiff black

cotton, hard red rearth, shales, murram, gravel, stoney earth

(except in hard rock requiring blasting) with an initial lead of

10m and an initial lift of 2m inclusive of shoring, shuttering,

bailing out water wherever necessary refilling the foundation

with excavated earth other than sandy soil in layers of not more

than 150 mm thick layers well rammed and depositing the

surplus earth with in the compound in place shown by the

"SIPCOT" officers with all leads & lifts, clearing and levelling the

site etc., complete complying with standard specification SS 20B

and as directed by SIPCOT officers

a 300 Cum

(Three hundred

cubic metre only)

Depth 0m to 2m 1 Cum

(One cubic

metre)

b 60 Cum

(Sixty cubic

metre only)

Depth 2m to 3m 1 Cum

(One cubic

metre)

I. Construction of AO Block with water supply, Sanitation, Electrical arrangements and compound wall at SIPCOT Industrial Growth Centre,

Gangaikondan in Tirunelveli District.

I. Construction of AO Block with water supply, Sanitation, Electrical arrangements at SIPCOT Industrial Growth Centre, Gangaikondan in Tirunelveli

District.

CONTRACTORNo. of Corrections:.............

No. of Overwritings:...........

Sl.No. Qty. Description of item TNBP

No.

Rate both in

figures and in

words

(Rs.)

Unit Amount

(Rs.)

1 2 3 4 5 6 7

2 70 Cum

(Seventy cubic

metre only)

Providing and laying of Plain Cement Concrete 1:4:8 (One

cement, Four sand and eight aggregate) using 40mm size Hard

broken granite stone jelly for foundation, flooring bed, dummy

columns, mudmat below column footings, Grade beams etc. laid

in layers not exceeding 15cm thick including cost and

conveyance of all materials and labour to work site, mixing of

concrete, laying, compacting, curing with all leads for soft

potable water, hire and fuel charges for all tools and plants

including all other incidental charges such as bailing out water for

forming protective bunds, coffer dams and shoring, strutting etc.

complete complying with standard specifications and as directed

by "SIPCOT" officers.

1 Cum

(One cubic

metre)

3 1550 Cum

(One thousand

five hundred and

fifty cubic metre

only)

Filling the basement with "Excavated earth" available at site

(Other than sand) in layers of not more than 15cm thick well

watering ramming and consolidation etc., complete complying

with standard specifications and as directed by "SIPCOT" officers.

1 Cum

(One cubic

metre)

CONTRACTORNo. of Corrections:.............

No. of Overwritings:...........

Sl.No. Qty. Description of item TNBP

No.

Rate both in

figures and in

words

(Rs.)

Unit Amount

(Rs.)

1 2 3 4 5 6 7

4 Reinforced Cement Concrete M30 design mex using 10mm and

20mm guage hard broken blue granite jelly for all reinforced

cement concrete works, excluding cost of centring , shuttering ,

strutting and also cost of reinforcement grill placed in position

but including machine mix of concrete, laying, vibrating with

mechanical vibrators, finishing, curing and also cost of fixing fan

clamps n roof slab wherever necessary and treatment of bearing

(i.e) junction of walls/beams/slabs smooth with CM 1:3 (one

cement and three cement and three sand) and kraft paper laid

over etc., complete complying with standard specifications and

as directed by "SIPCOT" officers.

a 119 Cum

(One hundred

and nineteen

cubic metre only)

For Foundation and basement 1 Cum

(One cubic

metre)

b 67 Cum

(Sixty seven

cubic metre only)

For Ground floor 1 Cum

(One cubic

metre)

c 60 Cum

(Sixty cubic

metre only)

For First floor 1 Cum

(One cubic

metre)d 7 Cum

(Seven cubic

metre only)

For Second Floor 1 Cum

(One cubic

metre)

CONTRACTORNo. of Corrections:.............

No. of Overwritings:...........

Sl.No. Qty. Description of item TNBP

No.

Rate both in

figures and in

words

(Rs.)

Unit Amount

(Rs.)

1 2 3 4 5 6 7

5 Supplying and erecting steel centering for sides and soffits

including supports and strutting for all concrete works in all floors

using mild steel BG 10 sheets of size 90 cm x 60 cm stiffened

with welded mild steel angles of size 25mm x 25mm x 3mm for

boarding laid over silver oak (country wood) joists of size 10cm x

6.5cm spaced at about 90cm centre to centre and supported by

casurina props of 10 cm to 13cm dia spaced at 75cm centre to

centre etc., Complete complying with standard specification and

as directed by SIPCOT Officers.

a 1350 Sqm

(One thousand

three hundred

and fifty square

metre only)

For vertical surfaces such as RCC wall, facia, fins, drops etc., 1 Sqm

(One Square

metre)

b 650 Sqm

(Six hundred and

fifty square

metre only)

For plane surfaces such as RCC floor salab,roof slab, lintels,bed

blocks, landing slab, waist slab,portico slabs etc.,

1 Sqm

(One Square

metre)

CONTRACTORNo. of Corrections:.............

No. of Overwritings:...........

Sl.No. Qty. Description of item TNBP

No.

Rate both in

figures and in

words

(Rs.)

Unit Amount

(Rs.)

1 2 3 4 5 6 7

6 385.50 Qtl

(Three hundred

and eighty five

point fize zero

quintal only)

Supply, fabricating and placing in position mild steel or ribbed tor

steel bars high strength deformed bars like RTS bars for

reinforcement for all reinforced cement concrete works including

cost and conveyance of steel, binding wire to work site, cost of

fabrication, labour charges for cleaning the roads, straightening,

cutting, bending, trying grills, hoisting and placing the

reinforcement in position before concreting, cost of binding wire,

provision of space bars, cover blocks and all other incidental

charges etc., Complete as per standard specification and as

directed by SIPCOT Officers.

1 Qtl

(One Quintal)

7 Brick work in cement mortar 1:3(One cement and three sand

using second class ground moulded chamber burnt bricks of size

9''*4 3/8''*2 3/4'' including curing etc., complete complying with

standard specification and as directed by SIPCOT officers.

a 35 Cum

(Thirty five cubic

metre only)

For Foundation and basement 1 Cum

(One cubic

metre)

b 76 Cum

(Seventy six

cubic metre only)

For Ground floor 1 Cum

(One cubic

metre)

c 80 Cum

(Eighty cubic

metre only)

For First floor 1 Cum

(One cubic

metre)

CONTRACTORNo. of Corrections:.............

No. of Overwritings:...........

Sl.No. Qty. Description of item TNBP

No.

Rate both in

figures and in

words

(Rs.)

Unit Amount

(Rs.)

1 2 3 4 5 6 7

d 29 Cum

(Twenty nine

cubic metre only)

For Second Floor 1 Cum

(One cubic

metre)

8 Brick work partition wall - 115 mm thick in cement mortar

1:5(One cement and five sand using second calss ground

moulded chamber burnt bricks of size 9''*4 3/8''*2 3/4'' including

curing etc., complete complying with standard specification and

as directed by SIPCOT officers.a 130 Sqm

(One hundred

and thirty square

metre only)

For Ground floor 1 Sqm

(One Square

metre)

b 50 Sqm

(Fifty square

metre only)

For First floor 1 Sqm

(One Square

metre)9 490 Sqm

(Four hundred

and ninety

square metre

only)

Special ceiling plastering and finishing all the exposed surfaces of

RCC works with cement mortar 1:3(One cement and three sand)

10mm thick, in all floors including hacking the surfaces and

providing necessary beadings, noisings etc. in sunshades if

required, curing etc. complete complying with standard

specification and as directed by SIPCOT officers.

1 Sqm

(One Square

metre)

10 Plastring with cement mortar 1:5(One cement and five sand),

12mm thick for external wall surfaces in all floors, and neatly

finishing to line, curing etc., complete complying with standard

specifications and as directed by SIPCOT officers.

1 Sqm

(One Square

metre)

CONTRACTORNo. of Corrections:.............

No. of Overwritings:...........

Sl.No. Qty. Description of item TNBP

No.

Rate both in

figures and in

words

(Rs.)

Unit Amount

(Rs.)

1 2 3 4 5 6 7

a 720 Sqm

(Seven hundred

and twenty

square metre

only)

For Ground floor 1 Sqm

(One Square

metre)

b 370 Sqm

(Three hundred

and seventy

square metre

only)

For First floor 1 Sqm

(One Square

metre)

c 60 Sqm

(Sixty square

metre only)

For Second Floor 1 Sqm

(One Square

metre)

d 550 Sqm

(Five hundred

and fifty square

metre only)

For outside building wall surface 1 Sqm

(One Square

metre)

CONTRACTORNo. of Corrections:.............

No. of Overwritings:...........

Sl.No. Qty. Description of item TNBP

No.

Rate both in

figures and in

words

(Rs.)

Unit Amount

(Rs.)

1 2 3 4 5 6 7

11 11 Cum

(Eleven cubic

metre only)

Weathering Course in brick jelly lime concrete using broken brick

jelly 20 mm uniform gauge in pure freshly burnt slaked lime (No

sand to be used). The proportion of Brick Jelly to lime being

32:12.5(Thirty two parts of Brick jelly and Twelve and a half

parts of lime) by volume and laid over the RCC roof slab in a

single layer of required design slope and finished thickness by

beating the concrete with wooden beaters of the approved

pattern. Keeping the surface constantly wet by sprinkling lime

water mixed with jaggery and kadukkai powder etc. complete

complying with standard specification and as directed by SIPCOT

officers.

1 Cum

(One cubic

metre)

12 275 Sqm

(Two hundred

and seventy five

square metre

only)

Finishing the top of Roof with one course of best approved

quality Machine Pressed Square Tiles of size 23cm x 23cm x 2cm

set in cement mortar 1:3 (One cement and three sand) 12mm

thick mixed with best quality water proofing compound at the

rate of 2% by weight of cement used and pointing the joints

neatly to full depth of tiles with the same cement mortar mixed

with water proofing compound and Red oxide including curing

etc. complete complying with standard specifications and as

directed by "SIPCOT" officers.

1 Sqm

(One Square

metre)

CONTRACTORNo. of Corrections:.............

No. of Overwritings:...........

Sl.No. Qty. Description of item TNBP

No.

Rate both in

figures and in

words

(Rs.)

Unit Amount

(Rs.)

1 2 3 4 5 6 7

13 370 Sqm

(Three hundred

and seventy

square metre

only)

Paving the floor with best approved quality Joint Free

"MARBONITE /VITRIFIED OR EQUIVALANT TILES" of size

600mm x 600mm x 8mm thickness of approved colour and

design in all floors laid true to line on both directions over a bed

of cement mortar 1:2 (One cement and two sand) 20mm thick

and joints pointed neatly with white cement mixed with matching

colour best quality colouring pigments and finishing neatly etc.

complete complying with standard specifications and as directed

by "SIPCOT" officers.

1 Sqm

(One Square

metre)

14 30 Sqm

(Thirty square

metre)

Paving the floor of Toilet Blocks with best approved quality "ANTI-

SKID" Joint free "VITRIFIED TILES" of 600mm x 600mm x 8mm

thickness of approved colour and design, laid true to line on both

direction over a bed of cement mortar 1:3 (One cement and

three sand) 20mm thick and joints pointed neatly with white

cement mixed with matching colouring pigments and finishing

neatly etc. complete complying with standard specifications and

as directed by "SIPCOT" officers.

1 Sqm

(One Square

metre)

15 90 Sqm

(Ninety square

metre only)

"DADOOING" the wall surfaces in Toilet Block in all Floors with

best approved quality "VITRIFIED TILES" of approved colour and

design of size 600mm x 600mm x 8mm laid true to line in both

directions over a bed of cement mortar 1:2 (One cement and two

sand) 10mm thick and joints pointed neatly to full depth of tiles

with white cement mixed with superior quality colouring

pigments and finishing neatly etc. complete complying with

standard specifications and as directed by "SIPCOT" officers.

1 Sqm

(One Square

metre)

CONTRACTORNo. of Corrections:.............

No. of Overwritings:...........

Sl.No. Qty. Description of item TNBP

No.

Rate both in

figures and in

words

(Rs.)

Unit Amount

(Rs.)

1 2 3 4 5 6 7

16 125 Sqm

(One hundred

and tweny five

square metre

only)

Paving the floor with best approved quality cement based

Hydraulically pressed Anti Skid tiles (pattern design) - 20 mm

thick of approved colour and design, laid true to line on both

direction over a bed of cement mortar 1:3 (One cement and

three sand) 20mm thick and joints pointed neatly with white

cement mixed with matching colouring pigments and finishing

neatly etc. complete complying with standard specifications and

as directed by "SIPCOT" officers.

1 Sqm

(One Square

metre)

17 45 Sqm

(Fourty five

square metre

only)

Supplying and fixing in position with best quality Fine Polished

Granite Tiles of 10 mm thick with machine cut edges laid true to

line in both directions with minimum possible width of joints in

cement mortar 1:2 (One cement and two sand) 20mm thick and

pointing the joints to full depth of granite slabs neatly with white

cement mixed with matching colour best quality colouring

pigments, etc. complete complying with standard specifications

and as directed by "SIPCOT" officers.

1 Sqm

(One Square

metre)

18 Supplying and fixing in position T.W. Frame for doors of size as

desired by Engineer in-charge including cost of T.W. and all

labour charegs for wrought & put up etc., complete as per

standard specification and as directed by SIPCOT Officers.

a 0.40 Cum

(zero point four

zero cubic metre

only)

TeakWood Scantlings upto 2m long 1 Cum

(One cubic

metre)

CONTRACTORNo. of Corrections:.............

No. of Overwritings:...........

Sl.No. Qty. Description of item TNBP

No.

Rate both in

figures and in

words

(Rs.)

Unit Amount

(Rs.)

1 2 3 4 5 6 7

b 0.52 Cum

(Zero point five

two cubic metre

only)

TeakWood Scantlings above 2m upto 3m long 1 Cum

(One cubic

metre)

19 Supplying and fixing of TeakWood panalled Shutters of 35mm

thick including brass oxidised door handle with CP

screws,Aluminium anodised Tower bolts, butt hinges, etc.,

complying with standard specification. The rate shal be inclusive

of best quality varnish over a coat of bees waxing supplying and

fixing suitable wind appliances etc. complete complying with

standard specification and as directed by SIPCOT Officers.

a 6.30 Sqm

(Six point three

zero square

metre only)

For double leaf shutters 1 Sqm

(One Square

metre)

b 12.60 Sqm

(Twelve point six

zero square

metre only)

For single leaf shutter 1 Sqm

(One Square

metre)

20 9.45 Sqm

(Nine point four

five square metre

only)

Supplying and fixing in position of PVC door frame with shutter

including cost of necessary hinges and other furniture fittings

etc., complete and as directed by SIPCOT Officers.

1 Sqm

(One Square

metre)

CONTRACTORNo. of Corrections:.............

No. of Overwritings:...........

Sl.No. Qty. Description of item TNBP

No.

Rate both in

figures and in

words

(Rs.)

Unit Amount

(Rs.)

1 2 3 4 5 6 7

21 3336 Kg

(Three thousand

three hundred

and thirty six

kilogram only)

Supply and fixing M.S. Grills of pattern / design using M.S

Angles/ square rods/ tubes etc., approved by SIPCOT officials for

windows, gates, including cost and conveyance of all required

materials with one coat of primer and all labour charges for

fabrication, fixing in position in Concrete/ Masonry/ Wooden

frames etc., complete and as directed by SIPCOT Officers.

1 Kg

(One

kilogram)

22 50 Sqm

(Fifty square

metre only)

UPVC Window Specification:

Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride)

Windows of casement type (open) from the profile the size of

outer frame 60mm x 58mm and shutter profile are reinforcement

with GI/1mm 125GSM and 100% corrosion free, the profiles are

multi chambered sections with wall thick of 2mm. The EPDM

rubber (black colour) covered with over all the edges of frame

and shutter the shutter will be provided with Espag multi power

point locks and also it operates as handle. The corners and joints

should be welded and cleaned. Radiations free pin headed plain

or brown colour glass 4mm thick should be provided to the

shutter and it should not allow leakage of water even at most

ranging storms and should have key lockable action, security

protective hinges, strong locking systems and as per size for

arresting noise and energy loss. The connecting mechanism

between sash and outer frame that enables opening of the

window. The window should be fixed to the wall with 100%

packing with screws and silicon packing all round the frames as

directed by SIPCOT Officials.

1 Sqm

(One Square

metre)

CONTRACTORNo. of Corrections:.............

No. of Overwritings:...........

Sl.No. Qty. Description of item TNBP

No.

Rate both in

figures and in

words

(Rs.)

Unit Amount

(Rs.)

1 2 3 4 5 6 7

23 3.24 Sqm

(Three point two

four square

metre only)

UPVC Ventilator

Specification:

Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride)

Louvered Ventilators of from the profile the size of outer frame

60mm x 58mm and shutter profile size of 60 x 78mm both

profiles are reinforced with GI/1mm 125GSM and 100%

corrosion free, the profile are multi chambered sections with wall

thick of 2mm. The EPDM rubber (black colour) covered with all

over the edges of frame and shutter. The corners and joints

should be welded and cleaned. Radiations pin headed glass 4mm

thick should be provided in the louvers. The window should be

fixed to the wall with 100% packing with screws and silicon

packing all round the frames. As directed by SIPCOT

Officials.complete complying with standard specification and as

directed by the "SIPCOT" officers.

1 Sqm

(One Square

metre)

24 490 Sqm

(Four hundred

and ninety

square metre

only)

White washing - two coats using Best Freshly burnt slaked shell

lime for "CEILING" including cost of Lime, Blue powder, Fevicol

type Gum, Brushes, scaffolding charges and all labour charges

etc. complete complying with standard specification and as

directed by the "SIPCOT" officers.

1 Sqm

(One Square

metre)

25 1700 Sqm

(One thousand

and seven

hundred only)

Painting two coats using Best approved quality water Emulsion

paints for Interior/Exterior surfaces of building over one coat of

primer including preparation of surface with putty wherever

necessary etc. complete complying with standard specification

and as directed by the "SIPCOT" officers.

1 Sqm

(One Square

metre)

CONTRACTORNo. of Corrections:.............

No. of Overwritings:...........

Sl.No. Qty. Description of item TNBP

No.

Rate both in

figures and in

words

(Rs.)

Unit Amount

(Rs.)

1 2 3 4 5 6 7

26 130 Sqm

(One hundred

and thirty square

metre only)

Painting "TWO COATS OVER NEW IRON WORK" such as steel

doors, windows, ventilators, gate and other similar works with

best approved first quality Synthetic Enamel Paint for Iron works

of approved colour over the existing priming coat etc. complete

complying with standard specification and as directed by the

"SIPCOT" officers.

1 Sqm

(One Square

metre)

27 88 Sqm

(Eighty eight

square metre

only)

Providing MDF Double leaf shutter with best quality of country

wood (Pillamarudhu) for cub board /ward robe including cost and

conveyance of all required materials and all labour charges for

finishing work etc. complete as directed by SIPCOT Officers.

1 Sqm

(One Square

metre)

CONTRACTORNo. of Corrections:.............

No. of Overwritings:...........

Sl.No. Qty. Description of item TNBP

No.

Rate both in

figures and in

words

(Rs.)

Unit Amount

(Rs.)

1 2 3 4 5 6 7

28 6 Nos

(Six numbers

only)

Supplying and fixing in position White / Colour Glazed Model

Floor Mounted European Water Closet of best quality and

approved make with 100mm “P” or “S” trap connecting with CI

pipe of 100mm dia / PVC pipe of 110mm dia, double flapped rigid

PVC black seat and seat cover with CP brass hinges including

cost of white cement, cement for packing, spun yarn, teak wood

plugs, brass screws, etc., including supplying and fixing 10 litres

capacity PVC / 12.5 litres capacity porcelin low level flushing tank

with a pair of CI brackets, etc., complete with all fittings, such

as, 15mm brass ball valve with polythene float with brass handle,

union coupling connected by means of 40mm white PVC flush

hand using indian adopter joint including all internal fittings, such

as, 15mm bras connections, 15mm GM wheel valve, 15mm brass

nipple (2 Nos.), 15mm nylon connection, TW plugs, screws and

also giving necessary connection to the PVC pipe and painting

the CI brackets with 2 coats of approved paint over one coat of

red oxide primer, dismantling the masonry and re-doing the

dismantled masonry to original condition, etc., complete

complying with standard specifications. (The EWC and flushing

tank with all accessories should be got approved by the

Executive Engineer before use on works)

Floor Fitting. complete and as dirtected by SIPCOT Officers.

1 No

(Each)

CONTRACTORNo. of Corrections:.............

No. of Overwritings:...........

Sl.No. Qty. Description of item TNBP

No.

Rate both in

figures and in

words

(Rs.)

Unit Amount

(Rs.)

1 2 3 4 5 6 7

29 6 Nos

(Six numbers

only)

Supplying and fixing in position best approved quality Indian

Make White Glazed Earthernware "WASH HAND BASIN" of size

550mmx400mm (Parryware or equivalent) without pedestal with

all accessories such as Cast Iron Brackets, 32 mm dia. C.P.

waste coupling, rubber plug and chain, 32 mm dia 'B" class GI

waste pipes, 15 mm dia G.M. wheel valve, 15 mm dia nylon

connection, 15 mm dia brass nipples, 15 mm dia C.P. Pillar tap

etc., complete and as dirtected by SIPCOT Officers.

1 No

(Each)

30 4 Nos

(Four number

only)

Supplying and fixing in position best approved quality of SS Sink

of size 600mmx450mm without pedestal with all accessories

such as Cast Iron Brackets, 32 mm dia. C.P. waste coupling,

rubber plug and chain, 32 mm dia 'B" class GI waste pipes, 15

mm dia CP valve, 15 mm dia nylon connection, 15 mm dia brass

nipples, 15 mm dia C.P. Pillar tap etc., complete and as dirtected

by SIPCOT Officers.

1 No

(Each)

31 Supplying and fixing of following sizes of PVC water supply Pipes

with specials as per standard specification and as directed by

SIPCOT Officers. a 250 Rm

(Two hundred

and fifty running

metre only)

32 mm O/D - PVC - 10 Kg/Cm2 Pipes 1 Rm

(One running

metre only)

b 80 Rm

(Eighty running

metre only)

25 mm O/D - PVC - 10 Kg/Cm2 Pipes 1 Rm

(One running

metre only)

CONTRACTORNo. of Corrections:.............

No. of Overwritings:...........

Sl.No. Qty. Description of item TNBP

No.

Rate both in

figures and in

words

(Rs.)

Unit Amount

(Rs.)

1 2 3 4 5 6 7

32 Supplying and fixing in position of approved quality of PVC Rain

water pipes of following sizes including cost of necessary shoes,

pvc bend, cast iron gratings of required diameter and special

clamps, brass screws, nails etc., complete as per standard

specification and as directed by SIPCOT Officers.

a 200 Rm

(Two hundred

running metre

only)

110 mm dia. PVC - 4 Kg/cm2 Pipes : 1 Rm

(One running

metre only)

b 90 Rm

(Ninety running

metre only)

75 mm dia. PVC - 4 Kg/cm2 Pipes : 1 Rm

(One running

metre only)

33 1 No

(One number

only)

Supplying and fixing of Open well submersible pumpset with duty

range of 75 LPM X 25 M head, with ISI mark - IS 14220 with

Single Phase Panel board with Two level guard and Auto start as

per TWAD specification, including fixing in position etc., complete

and as directed by SIPCOT Officers.

1 No

(Each)

34 3 Nos

(Three numbers

only)

Supply and delivery and fixing of 1000 Litre capacity HDPE tank

as per IS 12701 / 1996 including loading, unloading,

transportation and labour charges for fixing of the GI pipes and

specials for pipe connection works including cutting, threading

and fixing charges etc., complete as per standard specification

and as directed by the SIPCOT officers.

1 No

(Each)

CONTRACTORNo. of Corrections:.............

No. of Overwritings:...........

Sl.No. Qty. Description of item TNBP

No.

Rate both in

figures and in

words

(Rs.)

Unit Amount

(Rs.)

1 2 3 4 5 6 7

35 20 Nos

(Twenty numbers

only)

Supply and fixing in position 15 mm dia. Brasss Chromium plated

Screw down tap (heavy duty) / Pillar tap of approved make

confirming to IS specification and quality including cost of

shellac, thread, cutting and threading wherever necessary etc.,

complete complying with standard specification and as directed

bny SIPCOT Officers.

1 No

(Each)

36 100 Nos

(One Hundred

numbers only)

Wiring with 2 x 1.50 Sq.mm. 22/0.3) PVC insulated SC

unsheathed Cu. Conductor of 1100 V grade in suitable PVC rigid

pipe concealed in wall and ceiling with PVC accessories in flush

with wall with 3 mm thick hylum sheet cover with TW switch box

ans 5 A F.T. switch and making good of the concealed portion

with suitable colour for PVC concealed light etc., complete as per

PWD SED item No. 22 and as directoed by SIPCOT Officers

1 No

(Each)

37 30 Nos

(Thirty numbers

only)

Wiring with 2 x 1.50 Sq.mm. (22/0.3) PVC insulated SC

unsheathed Cu. Conductor of 1100 V grade in suitable PVC rigid

pipe concealed in wall and ceiling with PVC accessories in flush

with wall, with 150X100X113 mm TW switch box with 3 mm

thick hylum sheet cover for 5 A 3 pin non inter locking CS plug

with continuous earth wire connection of 14 SWG TC wire and

making good of the concealed portion with suitable colour for

PVC concealed plug point etc., complete as per PWD SED item

No. 26 and as directed by SIPCOT Officers

1 No

(Each)

CONTRACTORNo. of Corrections:.............

No. of Overwritings:...........

Sl.No. Qty. Description of item TNBP

No.

Rate both in

figures and in

words

(Rs.)

Unit Amount

(Rs.)

1 2 3 4 5 6 7

38 12 Nos

(Twelve numbers

only)

Wiring with 2 x 4 Sq.mm. (56/0.3) PVC insulated SC unsheathed

Cu. Conductor of 1100 V grade in suitable PVC rigid pipe

concealed in wall and ceiling with PVC accessories in flush with

wall, with 150X100X113 mm TW switch box with 3 mm thick

hylum sheet cover for 15 A 3 pin non inter locking CS plug with

continuous earth wire connection of 14 SWG TC wire and

making good of the concealed portion with suitable colour for

PVC concealed plug point etc., complete as per PWD SED item

No. 40 and as directed by SIPCOT Officers

1 No

(Each)

39 240 Rm

(Two hundred

and fourty

running metre

only)

Supply and run of 2 x 4 Sq.mm. (56/0.3) PVC insulated SC

unsheathed Cu. Conductor of 1100 V grade in suitable PVC rigid

pipe concealed in wall and ceiling with continuous earth wire

connection of 14 SWG TC wire and making good of the

concealed portion with suitable colour etc.,complete as per

standard specification and as directed by the SIPCOT officers.

1 Rm

(One running

metre only)

40 100 Rm

(One Hundred

running metre

only)

Supply and run of 2 x 1.50 Sq.mm. (22/0.3) PVC insulated SC

unsheathed Cu. Conductor of 1100 V grade in suitable PVC rigid

pipe concealed in wall and ceiling with continuous earth wire

connection of 14 SWG TC wire and making good of the

concealed portion with suitable colour etc., complete as per PWD

SED item No. 55 and as directed by SIPCOT Officers

1 Rm

(One running

metre only)

41 61 Nos

(Sixty one

numbers only)

Supply and fixing of single box type 4 ' 36 W flu. Fitting complete

with electronic ballest with TW round blocks on wall or ceiling

with flu. Tube with PVC unsheathed copper leads from terminals

to the fitting as per PWD SED item No. 87 and as directed by

SIPCOT Officers.

1 No

(Each)

CONTRACTORNo. of Corrections:.............

No. of Overwritings:...........

Sl.No. Qty. Description of item TNBP

No.

Rate both in

figures and in

words

(Rs.)

Unit Amount

(Rs.)

1 2 3 4 5 6 7

42 20 Nos

(Twenty numbers

only)

Supply and fixing of 1200 mm (48") AC ceiling fan complete with

stepped electronic 300W regulator with 300 mm down rod and

fan clamp etc., complete and as directed by SIPCOT Officers.

1 No

(Each)

43 6 Nos

(Six numbers

only)

Supply and fixing of 300 mm (12") sweep (Light duty) AC

exhaust fan complete with necessary wall opening and making

good of the wall etc., complete as per standard specification and

as directed by the SIPCOT officers.

1 No

(Each)

44 6 Nos

(Six numbers

only)

Supply and fixing of 20 Amps DP Plug and socket in sheet

enclosure with 32A DP MCB in flush with wall with earth

connection for AC Plug point in Legrand (MDS) / Hager

(L&T)make etc., complete and as directed by SIPCOT Offciers.

1 No

(Each)

45 4 Nos

(Four numbers

only)

Supply and fixing of Horizontal type 4 way triple pole neutral

MCB distribution board in sheet steel enclosure with 40 Amps 4

pole MCB Isolator as incoming and 12 Nos. 6 A to 32 A SP MCB

as outgoing in flush with wall and making good of the concealed

portion with earth connection. The MCBDB and MCB's should be

with the ISI mark (Like standard make) complete as per

standard specification and as directed by the SIPCOT officers.

1 No

(Each)

46 100 Rm

(One Hundred

running metre

only)

Supply and clamping of 3 1/2 x 95 Sq.mm PVC LTUG armoured

with specials as per standard specification and as directed by

SIPCOT Officers.

1 Rm

(One running

metre only)

47 400 Rm

(Four hundred

running metre

only)

Supply and clamping of 4 x 16 Sq.mm PVC LTUG armoured with

specials as per standard specification and as directed by SIPCOT

Officers.

1 Rm

(One running

metre only)

CONTRACTORNo. of Corrections:.............

No. of Overwritings:...........

Sl.No. Qty. Description of item TNBP

No.

Rate both in

figures and in

words

(Rs.)

Unit Amount

(Rs.)

1 2 3 4 5 6 7

48 2 Nos

(Two numbers

only)

Earthing as per the ISI specification with an earth electrode of

2.10 m class "B" GI Pipe of dia. Not less than 40 mm , with

copper earth plate of size 125 mm x 50 mm x 6 mm, with

necessary funneling arrangements and masonry work , 38 mm

RCC Cover slab for brick masonry etc., with specials as per

standard specification and as directed by SIPCOT Officers.

1 No

(Each)

49 10 Nos

(Ten numbers

only)

Supply and fixing of 65 mm dia. GI "B" class pipes of 6 m length

with 300mm x 300mm x 6 mm MS base plate duly welded at the

bottom with concreting and construction of masonry pedestal

with suitable MS Box to house 5A control switch 16 A fuse unit

(500V) etc., with suitable angle Iron frame work, with door with

lock and key arrangements and supply and fixing of 80 W SV/CFL

fitting with bulb, with 1 m of 32 mm dia. GI "B" class pipe

complete with necessary clamps, on the above post with PVC

unseathed leads with painting of suitable colour etc., complete as

per standard specification and as directed by the SIPCOT officers.

1 No

(Each)

50 45 Sqm

(Fourty five

square metre

only)

Supplying and fixing AC sheet roofing with 6mm thick asbestos

cement sheets of fully corrugated (grey colour) of approved

quality by drilling holes (and not by punching) with necessary „J‟

/ „U‟ bolts and nuts of 8mm dia of suitable length and providing

one set of bitumen washers of 25mm dia and 1.60mm thick for

each bolt including protruding portion of bolts in roof shall be

covered with bitumen compound etc., complete complying with

standard specification and as directed.

1 Sqm

(One Square

metre)

CONTRACTORNo. of Corrections:.............

No. of Overwritings:...........

Sl.No. Qty. Description of item TNBP

No.

Rate both in

figures and in

words

(Rs.)

Unit Amount

(Rs.)

1 2 3 4 5 6 7

51 15 Sqm

(Fifteen square

metre only)

Manufacturing, Supplying and Fixing of Stainless Steel Hand rails

for staircase using 50mm dia 304L Grade Stainless Steel pipe of

1.60mm thick at required locations to a height of 900mm from

finished floor level welded to 38mm dia Stainless Steel pipe post

of 1.00mm thick as vertical at 900mm centre with 2 Nos. of

25mm dia intermediate horizontal stainless steel pipe of 1.60mm

thick in between. The vertical pipe has to be welded to the 100 X

100 X 6mm MS base plate encased in the base concrete. The

rate is inclusive of the charges for cutting, bending, welding,

grinding, polishing, conveyance, electrical charges, etc. complete

as per standard specification and as directed by the SIPCOT

officers.

1 Sqm

(One Square

metre)

52 5 Nos

(Five numbers

only)

Supply and fixing in position of 1.50 Tonne AC Unit with

compressor unit as per approved make by SIPCOT officers

including cost and conveyance of all required materials and all

labour charges for fixing in position etc., complete as per

standard specification and as directed by the SIPCOT officers.

1 No

(Each)

53 20 Sqm

(Twenty square

metre only)

Supply and fixing in position of RCC preacst slab - 40 mm thick

using RCC 1:2:4 with 3 to 10 mm HBG jelly, cost of sand, stel

fabrication including cost and conveyance of all other required

materials and all labour charges for fixing in position

etc.,complete as per standard specification and as directed by

the SIPCOT officers.

1 Sqm

(One Square

metre)

CONTRACTORNo. of Corrections:.............

No. of Overwritings:...........

Sl.No. Qty. Description of item TNBP

No.

Rate both in

figures and in

words

(Rs.)

Unit Amount

(Rs.)

1 2 3 4 5 6 7

54 130 Cum

(One hundred

and thirty cubic

metre only)

Earth work excavation for foundation in all soils and sub-soils

and to full depth as may be directed except in Rock requiring

blasting but inclusive of shoring, strutting and bailing out water

wherever necessary and refilling the sides of foundation with

excavated earth (other than sand) in layers of 15cm thick, well

rammed and consolidated and deposting the surplus earth if any,

within the compound in places shown by the "SIPCOT" officers

with all leads and lifts etc. complete for side drain/Culvert

work as per SS 20 B standard specifications. complete as per

standard specification and as directed by the SIPCOT officers.

1 Cum

(One Cubic

metre)

55 140 Cum

(One hundred

and fourty cubic

metre only)

Removing the top soil including earth work excavation in all

classes of soils, removal of weeds and vegetation and roots etc.,

and depositing in the places shown by engineering incharge etc.,

complete as per standard specification and as directed by the

SIPCOT officers.

1 Cum

(One Cubic

metre)

56 40 Rm

(Fourty running

metre only)

Supplying and laying of 300 mm dia. RCC non pressure spun

pipes with socket and spigot ends - NP 2 class as per IS

458/2003 manufactured with sulphate resistance cement with 12

mm Hi- alumina lining with rubber rings including labour charges

for laying at proper levels and locations as directed by Engineer

in charge, transportation cost, jointing materials, etc. complete

as per standard specification and as directed by SIPCOT Officers.

1 Rm

(One Running

metre)

CONTRACTORNo. of Corrections:.............

No. of Overwritings:...........

Sl.No. Qty. Description of item TNBP

No.

Rate both in

figures and in

words

(Rs.)

Unit Amount

(Rs.)

1 2 3 4 5 6 7

57 110 Cum

(One hundred

and ten cubic

metre only)

Construction of Granular Sub - Base (GSB) to the required

compacted thickness (Drainage layer) by providing approved

Coarse graded material conforming to Grading- V of Table 400 1

and satisfying the physical requirement for material for GSB as

per Table 400 - 2 of MORTH Rev.-5 including screening,

spreading in uniform layers with motor grader on prepared

surface, watering and premixing by mix in place method with

rotavator at OMC, and compacting with Vibratory roller 80 to 100

KN static weight to achieve the desired density and fine

dressing to required grade and cross slope as directed by the

SIPCOT officers etc., complete including obtaining and

transporting all materials from approved quarry site to work site

with all lift and lead by mechanical transport, head load or any

other mode of transporation including cost and

conveyance of all materials, labour charges,hire charges and fuel

charges for loader, water tanker with sprinkler,motor grader,

vibratory road rollers and all other equipments, tools and plants,

safety measures, testing required including all other

incidental charges, etc., complete as per the standard

specification as per clause 401 of MORTH Rev.-5 and as

directed by the SIPCOT officers.

1 Cum

(One Cubic

metre)

CONTRACTORNo. of Corrections:.............

No. of Overwritings:...........

Sl.No. Qty. Description of item TNBP

No.

Rate both in

figures and in

words

(Rs.)

Unit Amount

(Rs.)

1 2 3 4 5 6 7

58 110 Cum

(One hundred

and ten cubic

metre only)

Providing and laying, spreading and compacting graded stone

aggreates to Wet Mix Macadam Base Course of 250mm

compacted thickness specification in 2 layers of 125mm thick

each or else as specified on the prepared sub base by providing

approved Coarse graded material conforming to Table 400 - 13

and satisfying the physical requirement for material for WMM as

per Table 400 - 12 of MORTH Rev.-5, including pre-mixing the

materials with water at OMC in mechanical mix plant carriage of

mixed matrerial by tipper to site laying in uniform layers with

favours in subbase/ base course on well prepared surface and

compacting with vibratory roller to achieve the desired density

including cost of material, labour charges, rental for machinery,

fuel and all other incidental charges etc., complete as per clause

406 of MORTH Rev.-5 and as directed by SIPCOT Officers.

1 Cum

(One Cubic

metre)

59 730 Sqm

(Seven hundred

and thirty square

metre only)

Providing and laying single coat of low viscosity liquid

bituminous material to the absorbent WMM surface using 7.00kg

of bituminous emulsion primer having Kinetic viscosity of 30-60

centistokes at 60oC complying with IS 8887 for 10 sq.m. area

including cost of bituminous primer, labour charges for preparing

the surface to lay the bituminous primer and applying required

quantity of bituminuous primer as prime coat by bituminous

sprayer etc. Complete as per clause 502 of MORT & H

specification and as directed by SIPCOT Officers.

1 Sqm

(One Square

metre)

CONTRACTORNo. of Corrections:.............

No. of Overwritings:...........

Sl.No. Qty. Description of item TNBP

No.

Rate both in

figures and in

words

(Rs.)

Unit Amount

(Rs.)

1 2 3 4 5 6 7

60 730 Sqm

(Seven hundred

and thirty square

metre only)

Providing and laying single coat of low viscosity liquid

bituminous material using 2.50 Kg of liquid bituminous emulsion

complying with ISS 8887 for 10 sqm. area over the WMM surface

treated with primer as tack coat, including cost of Bituminuous

binder, labour charges for preparing the surface to lay the

bituminous binder for applying the required quantity of

bituminous binder as tack coat by bituminous sprayer etc.,

Complete as per clause 503 of MORT & H specification and as

directed by SIPCOT Officers.

1 Sqm

(One Square

metre)

CONTRACTORNo. of Corrections:.............

No. of Overwritings:...........

Sl.No. Qty. Description of item TNBP

No.

Rate both in

figures and in

words

(Rs.)

Unit Amount

(Rs.)

1 2 3 4 5 6 7

61 36.50 cum

(Thirty six point

five zero Cubic

metre only)

Providing and laying 50mm compacted thickness dense

bituminous macadam using 0.24 cum of 26.50 -13.20 mm IRC

size graded metal 0.25 cum of 13.20 - 2.36mm IRC graded

metal and 0.23 cum of 2.36mm and below IRC size HBG metal

with 53.20 kg of VG30/VG40 bitumen for premixing for 10

Sq.meter includin cost and conveyance of all materials to CMP

site including cost and conveyance of bitumen and other

materilas to CMP site heating the bitumen and aggregates to

required temperature and mixing them in required temperature

in central hoti mix plant 20-30 tonnes capacity, conveying the

mix by tipper trucks to paver site, spreading the mix in required

temperature for uniform thickness of 50mm with mechanical

paver to the specified grades and cross sections and compaction

by vibratory Pneumatic Roller to the required density etc.,

including labour charges for loading the bitumen in bitumen tank

and metal to feeder unit, labour for attending to paver site etc.,

including hire,fuel charges for 20-30 tonnes capacity CMP unit

bitumen boiler, tipper ttrucks, paver finisher/9 m paver finisher,

vibratary/Pneumatic Roller, and all other tools & plants required

including fuel and all other incidental charges etc., complete

asper specification using CMP as per clause 505 MORTH REV. V

Specification and as per directed SIPCOT Officers.

1 Cum

(One Cubic

metre)

CONTRACTORNo. of Corrections:.............

No. of Overwritings:...........

Sl.No. Qty. Description of item TNBP

No.

Rate both in

figures and in

words

(Rs.)

Unit Amount

(Rs.)

1 2 3 4 5 6 7

62 730 Sqm

(Seven hundred

and thirty square

metre only)

Providing and laying single coat of low viscosity liquid

bituminous materials using 2.00 Kg of liquid bituminous emulsion

complying with ISS 8887 for 10 sqm. area over the DBM surface

as tack coat, including cost of Bituminuous binder, labour

charges for preparing the surface to lay the bituminous primer

for applying the required quantity of bituminous binder as tack

coat by bituminous sprayer etc., Complete as per clause 503 of

MORT & H specification and as directed by SIPCOT Officers.

1 Sqm

(One Square

metre)

CONTRACTORNo. of Corrections:.............

No. of Overwritings:...........

Sl.No. Qty. Description of item TNBP

No.

Rate both in

figures and in

words

(Rs.)

Unit Amount

(Rs.)

1 2 3 4 5 6 7

63 21.90 Cum

(Twenty one

point ninety cubic

metre only)

Providing and laying 30mm - 40mm compacted thickness

bituminous concrete using 0.13 cum of 19.0 - 9.5 mm graded

IRC size HBG metal 0.17 cum of 9.5-2.36mm IRC graded metal

and 0.26 Cum. of 2.36 mm and below size graded metal with

50.30 of bitumen grade VG 30/VG40 confirming to IS 73 for pre

mixing for 10 Sq. meter and using materials as per table 500 -

17 and staifying the physical requirement for material for course

aggregates for BC as per table 500 - 16 of MORTH REV-V

including cost and conveyance of all materials to CMP site ,

heating the bitumen andaggregates to required temperature and

mixing them in required temperature in central hot mix plant 20-

30 tonnes capacity, conveyin the mix by tipper trucks to paver

site spreading the mix in required temperature for uniform

thickness of 40mm with mechanical paver to the specified grades

and cross sections and consolidation 80-100 kn

vibratory/Pneumatic road roller to the required density etc.,

includinglabour charges for loading the bitumen in bitumen tank

and metal to feeder unit, labour for attending to paver site etc.,

including hire, fuel charges for 20-30 tonnes capacity CMP unit

bitumen boiler, tipper trucks, paver finaisher/9 m paver finisher

/Vibratory/Pneumatice road roller , and all other tools and plants

requried, including fuel and all other incidental charges etc.,

complete as per specification using CMPP as per clause 507 OF

MORTH REV. specification and as directed by SIPCOT Officers.

1 Cum

(One Cubic

metre)

CONTRACTORNo. of Corrections:.............

No. of Overwritings:...........

Sl.No. Qty. Description of item TNBP

No.

Rate both in

figures and in

words

(Rs.)

Unit Amount

(Rs.)

1 2 3 4 5 6 7

64 5.00 Sqm

(Five square

metre only)

Providing and laying of hot applied thermo plastic compound 2.5

mm thick including refletorising glass beads @ 250 gms per

Sq.m. area, thickness of 2.50 mm is exclusive of surface applied

glass beads as per IRC : 35. The finished surface to be level,

uniform and free from streaks and holes etc., complete as per

MORTH Specification No. 803 and as directed by SIPCOT officers

.

1 Sqm

(One Square

metre)

65 15 Rm

(Fifteen running

metre only)

Supplying and laying of 600 mm dia. RCC non pressure spun

pipes with socket and spigot ends - NP 3 class as per IS

458/2003 manufactured with sulphate resistance cement with 12

mm Hi- alumina lining with rubber rings including labour charges

for laying at proper levels and locations as directed by Engineer

in charge, transportation cost, jointing materials, etc. complete

as per standard specification and as directed by SIPCOT Officers.

1 Rm

(One Running

metre)

66 35 Sqm

(Thirty five

square metre

only)

Providing Granolithic floor finish 25mm thick with Plain Cement

Concrete 1:2:4 using 3 to 10mm ISS HBG metal, river sand and

including rubbing the top surface smoothly thread lining if found

necessary and curing etc. complete complying with standard

specification and as directed by SIPCOT Officers including cost

and conveyance of all material and labour, incidental charges,

etc. complete.

1 Sqm

(One Square

metre)

Section I - 66 items (Sixty six items only) Sub Total

CONTRACTORNo. of Corrections:.............

No. of Overwritings:...........

Sl.No. Qty. Description of item TNBP

No.

Rate both in

figures and in

words

(Rs.)

Unit Amount

(Rs.)

1 2 3 4 5 6 7

1 113 Cum

(One hundred

and thirteen

cubic metre only)

Earth work excavation for foundation in all soils and sub-soils and

to full depth as may be directed except in Rock requiring blasting

but inclusive of shoring, strutting and bailing out water wherever

necessary and refilling the sides of foundation with excavated

earth (other than sand) in layers of 15cm thick, well rammed and

consolidated and deposting the surplus earth if any, within the

compound in places shown by the "SIPCOT" officers with all leads

and lifts etc. complete complying wit standard specifications and

as directed by SIPCOT officers.

1 Cum

(One Cubic

metre)

2 74 Cum

(Seventy four

cubic metre only)

Filling the basement with "Excavated earth" available at site

(Other than sand) in layers of not more than 15cm thick well

watering ramming and consolidation etc., complete complying

with standard specifications and as directed by "SIPCOT" officers.

1 Cum

(One Cubic

metre)

3 15 Rm

(Fifteen running

metre only)

Supplying, laying and jointing of RCC hume pipe 600mm dia NP3

class as per standard specification and as directed by "SIPCOT"

officers.

1 Rm

(One running

metre only)

II. Construction of compound wall around A.O Block Building at SIPCOT Industrial Growth Centre, Gangaikondan in Tirunelveli District.

CONTRACTORNo. of Corrections:.............

No. of Overwritings:...........

Sl.No. Qty. Description of item TNBP

No.

Rate both in

figures and in

words

(Rs.)

Unit Amount

(Rs.)

1 2 3 4 5 6 7

4 17 Cum

(Seventeen cubic

metre only)

Plain Cement Concrete 1:4:8 (One cement, Four sand and eight

aggregate) using 40mm size Hard broken granite stone jelly for

foundation, flooring bed, dummy columns, mudmat below

column footings, Grade beams etc. laid in layers not exceeding

15cm thick including cost and conveyance of all materials and

labour to work site, mixing of concrete, laying, compacting,

curing with all leads for soft potable water, hire and fuel charges

for all tools and plants including all other incidental charges such

as bailing out water for forming protective bunds, coffer dams

and shoring, strutting etc. complete complying with standard

specifications and as directed by "SIPCOT" officers.

1 Cum

(One Cubic

metre)

CONTRACTORNo. of Corrections:.............

No. of Overwritings:...........

Sl.No. Qty. Description of item TNBP

No.

Rate both in

figures and in

words

(Rs.)

Unit Amount

(Rs.)

1 2 3 4 5 6 7

5 37 Cum

(Thirty seven

cubic metre only)

Reinforced Cement Concrete 1: 1 1/2 : 3 (One cement, One and

a half sand and three jelly) using Machine crushed 20mm size

Hard Broken granite ISS stone Jelly for all "REINFORCED

CEMENT CONCRETE WORKS" including cost and conveyance of

all materials and labour to work site excluding cost of centering,

shuttering, strutting and cost of MS / RTS Reinforcement grills

placed in position but including machine mixing of concrete,

laying, vibrating with mechanical vibrators, finishing, curing,

including cost of soft potable water treatment of bearing [(i.e.)

Junction of walls / beams and slabs] smooth with cement mortar

1:3 (One cement and Three sand) and kraft paper laid over it

without claim for extra and and all labour charges for mixing

concrete, laying, curing, vibrating charges, hire charges for all

tools and plants and all other incidental charges etc. and

providing weap holes at 1m interval including cost of PVC pipes if

required as directed by SIPCOT officers etc. complete complying

with standard specifications and as directed by "SIPCOT"

officers.For foundation and basement.

1 Cum

(One Cubic

metre)

CONTRACTORNo. of Corrections:.............

No. of Overwritings:...........

Sl.No. Qty. Description of item TNBP

No.

Rate both in

figures and in

words

(Rs.)

Unit Amount

(Rs.)

1 2 3 4 5 6 7

6 37.50 Qtl

(Thirty seven

point five zero

quintal only)

Supply, fabricating and placing in position mild steel or ribbed tor

steel bars high strength deformed bars like RTS bars for

reinforcement for all reinforced cement concrete works including

cost and conveyance of steel, binding wire to work site, cost of

fabrication, labour charges for cleaning the rods, straightening,

cutting, bending, tying grills, hoisting and placing the

reinforcement in position before concreting, cost of binding wire,

provision of space bars, cover blocks and all other incidental

charges etc., Complete as per standard specification and as

directed by SIPCOT Officers.

1 Qtl

(One Quintal)

7 195 Sqm

(One hundred

and ninety five

square metre

only)

Supplying and erecting Shuttering including necessary supports

for plane surfaces in "Foundation, Basement and in all Floors" for

"RCC Column Footings, Column Pedestals, Grade Beams, Plinth

Beams, Templates, Stair Case Steps" and other similar works,

which require nominal strutting using 10 BG mild steel angles of

suitable size stiffened with mild steel angles for boardings,

supported by Tubular steel/ Country wood scantilings/ Casurina

props of 10 cm to 13 cm diameter spaced at suitable intervals

etc. complete complying with standard specification and as

directed by SIPCOT Officials. For plane surfaces.

1 Sqm

(One Square

metre)

CONTRACTORNo. of Corrections:.............

No. of Overwritings:...........

Sl.No. Qty. Description of item TNBP

No.

Rate both in

figures and in

words

(Rs.)

Unit Amount

(Rs.)

1 2 3 4 5 6 7

8 110 Sqm

(One hundred

and ten square

metre only)

Supplying and erecting steel centering for sides and soffits

including supports and strutting for all concrete works in all floors

using mild steel BG 10 sheets of size 90 cm x 60 cm stiffened

with welded mild steel angles of size 25mm x 25mm x 3mm for

boarding laid over silver oak (country wood) joists of size 10cm x

6.5cm spaced at about 90cm centre to centre and supported by

casurina props of 10 cm to 13cm dia spaced at 75cm centre to

centre etc., Complete complying with standard specification and

as directed by SIPCOT Officers. For vertical surfaces. such as

RCC wall, facia, fins, drops etc.,

1 Sqm

(One Square

metre)

9 30 Cum

(Thirty cubic

metre only)

Brick work in cement mortar 1:5(One cement and five sand

using second calss ground moulded chamber burnt bricks of size

8.75''*4.25''*2 1/4'' including curing etc., complete complying

with standard specification and as directed by SIPCOT officers.

1 Cum

(One Cubic

metre)

10 175 Sqm

(One hundred

and seventy five

square metre

only)

Brick partition wall (Half Brick thich or Bricks on edge) of the

Following thickness with Brick work in Cement Mortor 1:3 (One

cement and Three sand) using chamber burnt stock bricks of size

9" x 41/2" x 3" including supplying and fixing hoop iron

reinforcement (Two Nos. of 600 dia M.S. Rounds in every fourth

layer of Brick work), curing scaffolding charges etc. complying

with standard specification and as directed by SIPCOT Officials.

1 Sqm

(One Square

metre)

CONTRACTORNo. of Corrections:.............

No. of Overwritings:...........

Sl.No. Qty. Description of item TNBP

No.

Rate both in

figures and in

words

(Rs.)

Unit Amount

(Rs.)

1 2 3 4 5 6 7

11 800 Sqm

(Eight hundred

square metre

only)

Plastring with cement mortar 1:5(One cement and five sand),

12mm thick for external wall surfaces in all floors, and neatly

finishing to line, curing etc., complete complying with standard

specifications and as directed by SIPCOT officers.

1 Sqm

(One Square

metre)

12 840 Sqm

(Eight hundred

and fourty

square metre

only)

Painting 2 coats with approved best quality cement paint over

cement plastered wall surface, ceiling and other new surface

(Total three coats - one priming coat with cement paint primer

plus two finishing coats with best quality cement paint) including

cleaning and preparing the surface by thoroughly washing,

putting wherever necessary, applying primer and paint evenly

to attain the shade required and curing etc., complete

complying with standard specification and as directed by the

SIPCOT officers. The rate shall include cost of all materials,

brush, scaffolding charges, all labour charges etc.,complying with

standard specification and as directed by the SIPCOT officers

1 Sqm

(One Square

metre)

13 250 Kg

(Two hundred

and fifty kilogram

only)

Supplying and Fixing Mild Steel Ornamental Gate made to the

design approved by "SIPCOT" Officers and fixing, cutting chases

in the concrete/ Masonry to the extent required using power drill

and making good the disturbed portion to original condition,

including applying one coat of Red Oxide/ Yellow Zinc Chromate

Primer to the grill etc.complete complying with standard

specification and as directed by SIPCOT Officials.

1 Kg

(One

Kilogram)

CONTRACTORNo. of Corrections:.............

No. of Overwritings:...........

Sl.No. Qty. Description of item TNBP

No.

Rate both in

figures and in

words

(Rs.)

Unit Amount

(Rs.)

1 2 3 4 5 6 7

14 15 Sqm

(Fifteen square

metre only)

Painting to grill with two coats over one coat of primer for new

Iron works using approved best quality Synthetic enamel paint

over iron primer including cost and conveyance of all required

materila at site and all labvour charges for painting , finishing

etc., complete as per standard specification.

1 Sqm

(One Square

metre)

CONTRACTORNo. of Corrections:.............

No. of Overwritings:...........

Sl.No. Qty. Description of item TNBP

No.

Rate both in

figures and in

words

(Rs.)

Unit Amount

(Rs.)

1 2 3 4 5 6 7

15 310 Kg

(Three hundred

and ten kilogram

only)

Supplying and fabricating and fixing MS grill gate/MS angle of

size 50mm*50mm*6mm as per type design drawing given by

SIPCOT and as directed by SIPCOT officers

1 Kg

(One

Kilogram)

16 800 Rm

(Eight hundred

running metre

only)

Supply and fixing of GI barbed wire 10 gauge fencing of six rows

over compound wall fixing including cost of fencing wire and all

labour charges for tying etc., complete.

1 Rm

(One Running

metre)

Section II-16 items (Sixteen items only) Sub Total

CONTRACTORNo. of Corrections:.............

No. of Overwritings:...........