general catalog - technonicoltechnonicol.it/images/cms/headers/example/catalog_en_web.pdf ·...

GENERAL CATALOGRange of waterproofi ng and insulation materials for the building industry

1 / 2016

CONTENT

INTRODUCTION

ABOUT THE COMPANY.....................................................4PRODUCTION IMPROVEMENT...........................................5QUALITY OF THE PRODUCTION.........................................5MATERIALS RESEARCH.....................................................6

POLYMER-BITUMEN MEMBRANES

ABOUT THE MATERIALS.....................................................8APPLICATION METHODS...................................................9AREAS OF APPLICATION.................................................10TRANSPORTATION AND STORAGE...................................10

ELASTOMERIC MEMBRANES

SCUDOELAST P4.............................................................12SCUDOELAST FCTR 180..................................................12GAMMAELAST P..............................................................13DELTAELAST P..................................................................13ECOELAST P.....................................................................14BETAGUM P.....................................................................14

POE MEMBRANES

SCUDOCENE M35..........................................................15SCUDOCENE M25..........................................................15SCUDOCENE L20............................................................15

ELASTOPLASTOMERIC MEMBRANES

SCUDOCENE P EXTRA .....................................................16SCUTUMPLAST FCTR 180...............................................16SCUTUMPLAST P.............................................................17SCUDOPLAST..................................................................17 SCUDOPLAST FCTR 160..................................................18GAMMAGUM P..............................................................18GAMMAPLAST P..............................................................19DELTAGUM P...................................................................19DELTAPLAST P..................................................................20SIGMAPLAST P.................................................................20

PLASTOMERIC MEMBRANES

ECOPLAST P.....................................................................21ECOPLAST V....................................................................21TROPICAL.....................................................................22OMEGA....................................................................22

BITUMEN MEMBRANES FOR SPECIAL APPLICATION

TECHNONICOL ENVIRO..................................................24SCUDOGARDEN PP.........................................................25RADONSTOP...................................................................26RADONSTOP P.................................................................26SCUDOPLUS P..................................................................27SCUDOBASE.................................................................27SCUDOVAPOR..........................................................27PERFOPLAST.........................................................28FIX POINT........................................................................28RECOVER P DIFO.............................................................29RECOVER P......................................................................29SCUDOART..................................................................30SCUDOART ADHESIVE ....................................................30UNDERLAY PRO 500.......................................................32GAMMAGUM P 4.5 KG MINERAL FR................................33SCUDOCENE L20 5.0 KG MINERAL FR............................33ACOUSTIC INSULATION FOR FLOORS AND WALLS...........34

SELF-ADHESIVE MEMBRANES

SCUDOTENE BV ALU.......................................................36 SCUDOTENE PLUS P.........................................................37

MEMBRANES FOR WATERPROOFING OF BRIDGES

SCUTUMPLAST BIARMATO.............................................40SCUDOPLAST CAR..........................................................40SCUDOPLAST FCTR.........................................................41

SYNTHETIC MEMBRANES

ABOUT THE MATERIALS..................................................44INSTALLATION...............................................................45TRANSPORTATION AND STORAGE..................................45

RANGE OF MATERIALS

LOGICROOF V-RP...........................................................46LOGICROOF V-GR..........................................................46LOGICROOF P-SR............................................................47LOGICROOF P-RP............................................................47LOGICROOF P-FB............................................................48LOGICROOF P-GR...........................................................48

SYNTHETIC MEMBRANES FOR SPECIAL APPLICATION

LOGICROOF T-SL............................................................50LOGICROOF T-PL............................................................50LOGICROOF P-SL............................................................50LOGICPOOL.............................................................51LOGICROOF P-HYDRO....................................................52VAPOR BARRIER.............................................................53WALKWAY PUZZLE.........................................................53

BITUMEN SHINGLES

ABOUT THE MATERIALS..................................................56SHAPES OF SHINGLES CUTS...........................................57PROPERTIES...............................................................57INSTALLATION...............................................................58

COLLECTIONS

COLLECTION TOP...........................................................60COLLECTION ULTRA........................................................61COLLECTION CLASSIC.....................................................62COLLECTION STANDARD................................................63

HEAT INSULATION MATERIALS

STONE WOOL

DESCRIPTION......................................................68TECHNOVENT........................................................70TECHNOLITE........................................................70TECHNOFACADE...................................................70TECHNOBLOCK...................................................71TECHNOROOF V.............................................................71TECHNOROOF N............................................................71TECHNOROOF Ng..........................................................72TECHNOROOF................................................................72TECHNOFLOOR.............................................................72

EXTRUDED POLYSTYRENE

DESCRIPTION......................................................74 TECHNONICOL CARBON ECO..........................................76TECHNONICOL CARBON PROF 300.................................76

LAMINATED INSULATION SYSTEMS

SCUDOTHERM XPS.........................................................78SCUDOTHERM EPS.........................................................79SCUDOTHERM EPS/GR...................................................80SCUDOTHERM MW.........................................................81SCUDOTHERM PUR.........................................................82SCUDOTHERM PUR GT...................................................83SCUDOTHERM GRECA.....................................................84SCUDOTHERM ONDA......................................................84

SELF-ADHESIVE SEALANT TAPE

NICOBAND.....................................................................86NICOBAND DUO.............................................................87NICOBAND INSIDE..........................................................88

LIQUID PRODUCTS

BITUMEN PRIMERS

VERPRIM ADHESIVE.......................................................90VERPRIM PROFESSIONAL...............................................90VERPRIM......................................................................90ECOVERPRIM...............................................................90

ATTACHING MASTICS

ADELCOLD......................................................................90ADECOLD STRIP..............................................................90ADEMASTIC...................................................................90ADEMASTIC ECO.............................................................90

PROTECTIVE COATINGS

SCUDOCOAT WHITE PLUS..............................................91SCUDOMETAL..............................................................91SCUDOCOLOR...............................................................91 SCUDOALL.............................................................91

BITUMEN EMULSION

BASEBIT.................................................................92

LIQUID MEMBRANE

SCUDOFLEX.................................................................92

SOLUTIONS FOR ASBESTOS-CEMENT COVERING

VERFIX.....................................................................92ELASTOCOVER..............................................................92

ACCESSORIES AND EQUIPMENT

ROOFING TORCHES AND EQUIPMENT............................94ROOF DRAINS AND SEALS..............................................95AERATORS................................................................95EQUIPMENT FOR PVC AND TPO....................................96PRE-FABRICATED ELEMENTS...........................................96INJECTION CONNECTING BRANCHES.............................97PVC RONDEL..................................................................97DRAINAGE SYSTEMS.......................................................97CLEANER FOR MEMBRANES...........................................98ADHESIVE FOR MEMBRANES.........................................98LIQUID PVC....................................................................98SEPARATION LAYER........................................................99LAMINATED METAL SHEET...............................................99TELESCOPIC FASTENERS.................................................100METALLIC ANCHOR.......................................................100FASTENERS...........................................................100VENTILATION COMPONENTS........................................101VENTILATION OUTLET...................................................101CONTINUOUS RIDGE VENT............................................101MASTIC FOR SHINGLES..................................................102ROOFING NAILS............................................................102HIP TILES.......................................................................102VALLEY GUTTER WATERPROOFING...............................102

INTRODUCTION

4

General catalog

TECHNONICOL ITALY

Italiana Membrane, established in 1988, is one of the main pro-ducers of waterproofi ng construction materials in Italy. The con-stant technological development of the manufacturing lines has allowed Italiana Membrane to extend its range of products.

The company produces bitumen modifi ed waterproofi ng mem-branes, APP, SBS and POE, self-adhesive membranes, heat insu-lation laminated to waterproofi ng membranes, bitumen shingles and water-based protective liquids. This wide range of productshas over the years successfully been competing in quality and in-novation with others producers in European countries.

The Italiana Membrane products are sold in over 50 countries all over the world. Approximately 65% of the total produced mate-rials are supplied to the Italian market while the remaining 35% are exported to most of the European countries, Middle East, Far East, Africa.

To be competitive on the export markets Italiana Membrane produces materials in accordance with the highest standards.

All products are certifi cated by prestigious certifi cation bodies.

The manufacturing lines of Italiana Membrane are extremely adaptable and the technical staff consists of experienced and high-qualifi ed technicians.

The key of the successful activity of Italiana Membrane resides in the high quality of research and controls Before, during and after production.

At the end of 2013 Italiana Membrane plant became a part of the TechnoNICOL Corporation. The corporate has more than 50 000 customers between organizations and individuals spread out over Russia, Europe and CIS.

TechnoNICOL is the largest Russian and European manufacturer and supplier of roofi ng and waterproofi ng materials. The range includes bitumen shingles, sound insulation, heat insulation of extruded polystyrene and stone wool as well as accessories to solve every waterproofi ng problem of both fl at or pitched roofs.

Although the company was founded in 1992, It has plants, his-tory and experience that, put together offer more than 100 years of knowledge in the production of roof waterproofi ng materials.

The main objectives of TechnoNICOL Corporation are: Research and production of new construction materials to

continuously improve the level of quality and life; Development of construction systems that can create an

energy-effi cient solution for the building - a comprehensive structure protection from its foundation to roof;

Contribute to the environmental improvement for the well-being of future generations.

The production capacity of the Italiana Membrane plant is 20 million sq. m per year. The plant has 3 lines for the produc-tion of polymer-bitumen materials, 1 line for shingles, 1 line for producing of waterproofi ng liquids (including water-based) and 1 line of heat insulation and waterproofi ng panels, which have not been presented in the TechnoNICOL product range so far.

Following the regional market demands, Corporation extends ge-ography of the production sites. This makes TechnoNICOL more fl exible and able to supply products more promptly without the added transportation costs. Italiana Membrane is also integrated into TechnoNICOL development plan.

Sales partners

in more than

export

countries 50

35%

annual turnover

is more than

qualifi ed employees

on the construction

market

billion Euros1

6500

over 20 yearsover the world

production sites40

5

General catalog

TECHNONICOL ITALY

Since 2004, Italiana Membrane is committed to continuous im-provement of pollution prevention and environmental protec-tion, which is also the main aim of TechnoNICOL Corporation.

All plants of the Corporation are subjected to state environ-mental appraisal at their design stage. The inside and out-side environment at our industrial sites is monitored daily. TechnoNICOL invests in wastefree production, advanced equipment, and environmental protection technologies.

All products developed and manufactured by TechnoNICOL meet sanitary and environmental standards and are safe for human beings and the environment.

Competence of employees, professional technical consultations, development of new materials in our own R&D centers, qual-ity products and solutions - all these allow TechnoNICOL to ap-proach each client individually. And help us meet every custom-er’s expectations and needs. Cooperation with design institutes and architectural offi ces allows the Corporation to react fl exibly and quickly to changes in the consumers demand.

Thanks to several improvements within the organisation and fa-cility on a long-term base in 2004 Italiana Membrane was grant-ed the environment certifi cation UNI EN ISO 14001.

Since 1997, when the company became UNI EN ISO 9001 certi-fi ed, Italiana Membrane strictly complies with the quality stan-dards provided by this international requirement.

According to Construction Products Directive CPD 89/106/EEC, in 2006 the company has been certifi ed to the Factory Production Control no. GB 06/69406 for the CE marking of the products according to EN 13707, EN 13969 and EN 14695 standards.

Furthermore the research and development laboratory, has ob-tained many product certifi cations issued by prestigious Italian and foreign institutes:

Material RADONSTOP is an effective protection against radon, providing isolation of inner premises from the gas and water. Its effectiveness is confi rmed by tests of the CSI Institute.

The effi ciency of reducing NOx when using material ENVIRO AIR is proven by the Laboratory of Photocatalysis, Institute for Technical Chemistry (Hannover, Germany).

Root resistant membranes SCUDOGARDEN PP has passed the test according to EN 13948. The certifi cation was released by the Institute of Horticulture, UAS Weihenstephan - Triesdorf.

The fi re-resistant waterproof membranes are tested accoring to Broof (t2) and correspond to the Euroclass of fi re safety of building constructions.

Some materials have obtained BBA (British Board of Agrément) certifi cates - recognised throughout the construction industry as a symbol of quality and reassurance.

DVT (Documento di Valutazione Tecnica) is voluntary certifi -cation issued by ITC ( Italian Institute for construction). DVT covers voluntary aspects not covered by CE marking and it is important document for the Italian market mainly. Membranes with DVT certifi cate are the top quality membranes.

Italiana Membrane will continue to maintain the produc-tion’s quality standards and, thanks to the cooperation and the exchange of technology between the technical specialists, TechnoNICOL will have the opportunity to expand their assort-ment of products and propose new solutions for waterproofi ng.

Improved customer service - one of our priority principles. Leadership of TechnoNICOL products in the waterproofi ng market is due not only to the quality and innovative products we produce, but also to a high level of technical support.

On-site technical and qualifi ed specialists, technical consultants, supervision and back-up, quality control of works on the project, development of design and solutions – and this is only to mention some of the things we do to assist our clients.

The wide range of materials and production capacity of the Italiana membrane plant allows TechnoNICOL to improve and expand its presence in Europe and the Mediterranean countries.

QUALITY OF THE PRODUCTION

PRODUCTION IMPROVEMENT

6

General catalog

TECHNONICOL ITALY

On the basis of the production sites TechnoNICOL acts laborato-ries and 5 own Scientifi c and Research Center of the Company.

The research activities of laboratories and research centers aimed at the study and prevention of the causes of aging materials, ex-panding the operating temperature range of roofi ng materials, increase the range of their application.

The main activities of the laboratories and Research Centers are: Creating of the new roofi ng, waterproofi ng and heat insula-tion materials;

Work on claims: chemical, heat, microscopic and other analy-sis, assistance in solving technological problems;

Modernization of current technology; Improvement of methods for the analysis of raw materials and fi nished products, the introduction of rapid methods;

General and methodological support of plans laboratories.

Plant’s laboratories are equipped with modern equipment, which you can use to study the physical and mechanical characteristics

of materials in a wide temperature range, to accurately deter-mine the structure and composition of raw materials, to test the durability of materials.

Unique chromatograph allows to determine the composition of the bitumen, which is used in the production of roofi ng materi-als, and, thus ,optimal selection of the type and amount of modi-fying additives.

To study the aging process is used the set of an artifi cial climate, with which it is possible for 2-3 months to predict material prop-erties after 10-15 years of operation on the roof.

Currently being developed modern chemical-, radiation-, light-, ozone-, bioresistant materials, mastics and aquatic emulsions, membranes for single-layer roofs.

Research and implementation of advanced technologies enable the TechnoNICOL to bring to market several new products each year.

MATERIALS RESEARCH

POLYMER-BITUMENMEMBRANES

POLY

MER

-BIT

UM

EN

MEM

BR

AN

ES

8

Polymer-bitumen membranes

ABOUT MATERIALS

SLATE

The coarse-grained dressing compound (slate) is used for ultraviolet exposure protection of polymer-bitumen binder. At that, slate is painted in various colors that will help possible aesthetic problems.

Standard colors include natural gray, red, green and white, while other colors are available on request.The use of hydrophobized slate ensures that the moisture does not reach the binder and increases the adhesion of slate to the material thereby increasing the life expectancy of the roof covering.

SPECIAL COVERING

New eco-fi endly products line ENVIRO have a real impact on the environment, help to purify the air in cities and have a positive impact on energy effi ciency thanks to the fi nish surface with special additives.WHITE - surface with white high solar re-fl ection helps to obtain the «Cool Roof» effect on the fl at roof.BLACK - roof covering with black surface provides an energy-effi cient effect.Roofi ng material AIR has a positive effect on the reduction of nitrogen oxides NOx in the air. The main fi ghter against nitric oxide NOx is titanium dioxide TiO2 with special binder additives.FOREST surface with additives against the overgrowing with moss and vegetation.

FINE-GRAINED SAND OR TALCUM

fi ne-grained sand or talcum are used for installation of the subsequent (top) layer on cold- and hot-applied mastics;

fi ne-grained sand improves coupling of waterproofi ng system’s layers.

FILM

anti-adhesion polymer fi lm prevents the material from sticking to the roll;

indicator of the proper heating of the material at torch-on application (for the materials with graphic on the bottom side of the roll). It is ready to be welded when graphic is deformed but visible.

VENTILATION DUCTS

Surface with longitudinal streps of spe-cial elastomeric compound having some breakes and covered by anti-adhesive polypropylene fi lm. This surface allows to equalize the pressure of the vapor, that accumulates under the roof cladding.

SELF-ADHESIVE SURFACE

Special bituminous adhesive compound, protected with easily removable silicon-ized fi lm. Is used where the standard torch-on application is forbidden (wood-en base, extruded polystyrene).

SPUNBOND

Polypropylene (Spunbond) makes ma-terial non-slippery in different weather conditions.

PERFORATED SURFACE

Is specifi cally designed for use as the per-forated venting underlay, ensures an even distribution of the points of adhesion.

Roof coverings during their service life undergo the effects of many unfa-vourable factors from the external en-vironment. Changes in the surround-ing temperature cause deformations in both the roofi ng material and the base on which it is installed. The abil-ity to withstand such deformations is the most important characteristic of roofi ng material and this depends on the base used in the production of the material.

Compound is a specially formulated mix-ture of bitumens and polymers. The main difference between compound types is in the kind of polymer used:

SBS provide to the compound excellent low temperature workability, resistance to mechanical stress and ideal elastic performance. Their limitation is that they are unstable at high temperatures and do not withstand UV radiation.

APP provide to the compound excel-lent UV resistance and high tempera-ture stability. Their limitation is that they are less elastic and fl exible at low temperatures.

Advantages of polymers have led to the compounds which combine the best properties of SBS and APP polymers and are heat-resistant, UV stable, elastic and fl exible, even at low temperatures.

POE elastomeric polyolefi nes allow to improve the fl exibility of APP modifi ed bitumen membranes.

Special antiroots additives (Preventol B5) make it resistant to damage caused by roots of plants and ensure reliable waterproofi ng.

Special heat-adhesive bitumen com-pound that adheres to the old damaged waterproofi ng by torch-on application. This compound used for re-roofi ng materials.

Reinforcement can consist of: Glass fi bre mat: provides dimensional stability and rot resistance (V).

Polyester: provides good mechanical strength (PET).

Al foil: absolute vapour barrier (Al). Composite polyester: polyester mat with glass threads or net (CP).

SURFACE TREATMENTS

THE REINFORCING MAT

THE COMPOUND

9

POLY

MER

-BIT

UM

EN

MEM

BR

AN

ES


ABOUT MATERIALS

1. The surface must be cleaned of dust, debris, grease, leaves and should not have gaps and cracks or other irregularities. Surface must be treated with primer before installation of waterproofi ng or insulating material.

2. During installation, material and base must be heated by torch, on all width of the roll. Additionally the place of the overlapping must be heated. During proper installation material sticks to base and on the edges the bitumen is leaking on around 15mm.

3. Overlays along the top roofi ng material should be located at a distance of min. 300 mm (usually 50% width) from the overlays of bottom material. Across overlays of top layers also should be located at a distance of min. 500 mm.

4. Width of overlaps along material should have at least 80 mm. Recommended ovelaps are 100 mm wide for single-layer. Width of head overlaps should be no less than 150 mm. The minimum width of rolled material, which can be mounted is 1m.

5. In the head overlaps area remove coarse-grained dressing compound, because it signifi cantly reduces the adhesion of roll roofi ng material. Overlaps must be additionally heated by torch.

1. The surface must be cleaned of dust, debris, grease, leaves and should not have gaps and cracks or other irregularities. Surface must be treated with primer before applying of mastic.

2. Spread the attaching mastic to the base with a special spatula, while adhering to the recommendations about layer. It is recom-mended to use a specialized cold-applied roofi ng mastic. You can also apply the hot-applied mastic, which is applied to the surface pre-melted at a temperature of 180°C.IMPORTANT! Mastic is always applied to the surface, not on the material.

3. Rolled roofi ng material should be installed on the spread mastic layer, avoiding creases and bubbles.IMPORTANT! Only materials with a coating of fi ne-grained sand are suitable for mastic-application.

4. Straighten the rolled material, smoothing it with a brush, to avoid creases or bubbles of air on the material. Then fi x the completely glued roll with a heavy roller.

5. Press down the material on overlappings until the mastic fl ow out of the joint. Optimally, mastic should be fl owed out from the overlappings not more than 10 mm and herewith not less than 7 mm.

1. Automatic equipment such as Leister Varimat may be used for overlaps adhesion in the process of installation. In this case it is recommended to arrange an additional mountable strip. It will increase convenience and operation speed. At this end joints do not need to be staggered. This technological method can be used in the process of applying traditional equipment – torch. In the system with the surface of the roof made of shaped decking single layer membrane should be rolled across fl ooring waves.

2. Longitudinal overlap is 120 mm. Transverse rolls overlapping - 150 mm. Staggered end joints must be arranged at least 150 mm from each other. If the roof surface is made of shaped decking, single layer membrane should be rolled across fl ooring waves.

3. The corner of the roll between upper and bottom rolls should be cut in the place of T-shaped joints.4. Cutting of the corner allows to increase the quality of welded connection and to avoid lack of material fusion in this place. 5. Places that can not be welded by automatic equipment, welded by hand using a heat gun.

TORCH-ON APPLICATION

APPLICATION WITH MASTIC

INSTALLATION OF SINGLE LAYER MEMBRANE

1

1

1

3

3

3

2

2

2

4

4

4

5

5

5

10


ABOUT MATERIALS

Rolls should be stored up-right in a 1 row height on pallets. Temporary storage of pallets in 2 rows in height is permitted. Protect the rolls from direct UV-rays and moisture. Minimum distance of 1m from source of heat.

Rolls must be transported in an up-right position on pallet in1 row. Roll’s protective fi lm should not be damaged during loading and unloading.

Use ropes to fasten the pallet in order to avoid the fi lm damage. Avoid hard falls or impacts during loading and unloading.

AREAS OF APPLICATION

TRANSPORTATION AND STORAGE

A B С D E

F G H I J

SINGLE-PLY MEMBRANE

Waterproofi ng of shop-ping centers, industrial or any other buildings where it is important to get the quick result. Installation of single-layer membrane takes much less time than double-layer system.

ROOT RESISTANT.

CAP SHEET MEMBRANE

The top layer of roof cladding in “green roof“ systems. In this system the role of ballast per-forms the ground with greenery.

CAP SHEET MEMBRANE

The top layer of a dou-ble-layer roof cladding. Is used for waterproof-ing of the fl at roof of residential, public or in-dustrial buildings.

ROOFING UNDERLAY

Underlay material for the all kinds of pitched roof with protective covering (roofi ng) by the piece materials (shingle, ce-ramic tiles, metall tiles), which involve the use of underlayment.

UNDERLAY MEMBRANE

The bottom layer of a double-layer roof clad-ding. Is used for water-proofi ng of the fl at roof of residential, public or industrial buildings.

VAPOR BARRIER

Vapor barrier for the fl at roofs of residential, pub-lic and industrial build-ings with all types of the base - concrete, metal, wood constructions.

INDOOR WATERPROOFING

This group includes a variety of roll water-proofi ng materials: self-adhesive or fi xed to the surface by means of cold or hot mastic.

FOUNDATIONS AND BLIND SIDES OF BELOW-GRADE WALLS

Waterproofi ng of foun-dations and prevents the damage of the support-ing structures of build-ings and underground structures, allows to get rid of damp (wet) walls, effl orescence, dam-age of the walls by the fungus.

UNDER HEAVY-DUTY PROTECTION

The top layer of the roof cladding in systems of the inversion or ballast roofs. Is used for water-proofi ng of residential and public buildings and structures with different levels of the roof and a large area of the roof.

WATERPROOFING OVERLAID WITH BITUMEN BINDER COURSE

Waterproofi ng of con-crete bridge decks, car parking and other traf-fi cked areas.

11

POLY

MER

-BIT

UM

EN

MEM

BR

AN

ES


ABOUT MATERIALS

REFERENCES

Naples , Italy

MCARTURGLEN - LA REGGIA DESIGNER OUTLET

Rēzekne, Latvia

EMBASSY OF LATGALE “GORS“

Klaipeda, Lithuania

VLANTANA, LOGISTICS CENTER

12



Is a premium SBS modifi ed bitumen membrane. SCUDOELA ST P4 - installation as the bottom layer of roof cladding, for waterproofi ng of engineer-ing structures. Can be used for the installation as two-layer foundations waterproofi ng.SCUDOELA ST P4 MINERAL - installation as single or the top layer of roof cladding on buildings and constructions. Used for new roofi ng construction and for repair of old roof.The product has obtained ITC (DVT n. 0013) and BBA certifi cates (BBA Agrement n. 14/5123).

SCUDOELAST FCTR 180 - installation as the bottom layer of roof cladding, for waterproofi ng of engineering structures. Can be used for the installation as two-layer foundations waterproofi ng.SCUDOELAST FCTR 180 MINERAL - installation as the top layer of roof cladding on buildings and constructions. The reinforcement is a spunbond non-woven polyester.

-25°C

-25°C

SCUDOELAST P4

SCUDOELAST FCTR 180

Full specifi cations of the product is on the our website www. technonicol.it


Torch-on application


INSTALLATION

INSTALLATION

PRODUCT THICKNESSUPPER

SURFACELOWER

SURFACEAPPLICATIONS REINFORCEMENT

DIMENSIONSOF THE ROLL, m

ROLLSPER PALLET

SCUDOELAST P4 4 mm

PET

10 x 1 20

SCUDOELAST P4 MINERAL

4 mm on selvedge 7.5 x 1 23

PRODUCTTHICKNESS

WEIGHTUPPER

SURFACELOWER



ROLLSPER PALLET

SCUDOELAST FCTR 1804 mm

PET

10 x 1 20

5 mm 7.5 x 1 23

SCUDOELAST FCTR 180 MINERAL

4.0 kg 10 x 1 23

4.5 kg 10 x 1 20

5.0 kg 7.5 x 1 23

* COLOURS AVAILABLE UPON REQUEST:

A B

B

I

I

С

С

E

E

13

POLY

MER

-BIT

UM

EN

MEM

BR

AN

ES



GAMMAELAST P is a high quality SBS (styrene butadiene styrene) polymer bitumen modifi ed membrane. Thanks to its exceptionally high intrinsic characteristics, is used for the waterproofi ng of residential, commercial and industrial buildings, whether insulated or not, which are likely to be subjected to high stresses (tensile structures, metal profi le decks and similar). Due to its excellent cold fl exibility, it is also used in case of cold climates. The reinforcement is spunbond stabilized composite polyester.

-20°CGAMMAELAST P



INSTALLATION

PRODUCTTHICKNESS

WEIGHTUPPER

SURFACELOWER



ROLLSPER PALLET

GAMMAELAST P4 mm

PET

10 x 1 20

5 mm 7.5 x 1 23

GAMMAELAST P MINERAL

4.0 kg 10 x 1 23

4.5 kg 10 x 1 20

5.0 kg 7.5 x 1 23


B

IС E

DELTAELAST P is a high quality SBS polymer bitumen modifi ed membrane. The reinforcement is a composite polyester. DELTAELAST P is waterproofi ng membrane and cap sheet for use in applications on various roof types, whether they are insulated or not, especially those which are subjected to high levels of stress such as tensile structures or metal profi le decks. Ideal also for use in cold climates.

-20°CDELTAELAST P



INSTALLATION

PRODUCTTHICKNESS

WEIGHTUPPER

SURFACELOWER



ROLLSPER PALLET

DELTAELAST P

3 mm

PET

10 x 1 25

4 mm 10 x 1 20

5 mm 7.5 x 1 23

DELTAELAST P MINERAL

4.0 kg 10 x 1 23

4.5 kg 10 x 1 20

5.0 kg 7.5 x 1 23

B

I

I

С

С

E

14




ECOELAST P is an SBS (styrene butadiene styrene) polymer bitumen modifi ed membrane. The reinforcement is a composite polyester. ECOELAST P is waterproofi ng membrane and cap sheet for use in application on various roof types, whether they are insulated or not, especially those which are subjected to high levels of stress such as tencile structures or metal decks. Ideal also for use in cold climates.

BETAGUM P is an SBS (Styrene Butadiene Styrene) polymer modifi ed membrane. The reinforce-ment is a composite polyester. It is used on civil and industrial decks subjected to mechanical stress-es, tensile structure, metal deckings, pre-fabricated decks and/or with cold climates.

-20°C

-15°C

ECOELAST P

BETAGUM P





INSTALLATION

INSTALLATION

PRODUCTTHICKNESS

WEIGHTUPPER

SURFACELOWER



ROLLSPER PALLET

ECOELAST P

3.0 kg

PET

10 x 1 30

4.0 kg 10 x 1 25

4 mm 10 x 1 20

ECOELAST P MINERAL

4.0 kg 10 x 1 23

4.5 kg 10 x 1 20

5.0 kg 7.5 x 1 23

PRODUCTTHICKNESS

WEIGHTUPPER

SURFACELOWER



ROLLSPER PALLET

BETAGUM P

3 mm

PET

10 x 1 25

4.0 kg 10 x 1 23

4 mm 10 x 1 20

ECOELAST P MINERAL 4.5 kg 10 x 1 20

B

B

I

I

I

I

С

С

С

С

E

E

15

POLY

MER

-BIT

UM

EN

MEM

BR

AN

ES


POE MEMBRANES

SCUDOCENE M25 is a waterproof membrane made of POE. It is based on co-polymers provides the best performances from both APP and SBS, it is I.T.C. (DVT n. 0012) approved for single ply application on the Mineral version and also on sand version. SCUDOCENE M25 and SCUDOCENE M25 MINERAL have an high weigth composite polyester with very good thermal stability.

SCUDOCENE L20 is a waterproof membrane made of distilled bitumen, APP co-polymers and elas-tomeric polyolefi nes (POE). The material is reinforced with spunbond stabilized composite poly-ester. The product has an optimal dimensional stability and can be used in the most rigid weather conditions.

-25°C

-20°C

SCUDOCENE M25

SCUDOCENE L20





INSTALLATION

INSTALLATION


SURFACELOWER



ROLLSPER PALLET

SCUDOCENE M25 4 mm

PET

10 x 1 23

SCUDOCENE M25 MINERAL

4 mm on selvedge 7.5 x 1 23

PRODUCTTHICKNESS

WEIGHTUPPER

SURFACELOWER



ROLLSPER PALLET

SCUDOCENE L20 4 mm

PET

10 x 1 23

SCUDOCENE L20 MINERAL 4.5 kg 10 x 1 23

B

B

I

I

С

С

E

E

A

A

A

SCUDOCENE M35 is a waterproof membrane made of distilled bitumen and elastomeric polyole-fi nes (POE). The products is reinforced with spunbond stabilized composite polyester. The material has an optimal dimensional stability and can be used in the most rigid weather conditions.

–35°CSCUDOCENE M35



INSTALLATION


SURFACELOWER



ROLLSPER PALLET

SCUDOCENE M35 4 mm

PET

10 x 1 23

SCUDOCENE M35 MINERAL

4 mm on selvedge 7.5 x 1 23A B

IС E

16



SCUTUMPLAST FCTR 180 is elastoplastomeric type membranes obtained from distilled bitumen modifi ed with elastomeric resins and plastomeric polymers. The reinforcement is a spunbond non-woven polyester. It is used on civil and industrial decks, foundations, parckings, pre-fabricated, wooden or metal decks. The product has obtained ITC (DVT n. 0011) and BBA certifi cates (BBA Agrement n. 14/5122).

-20°CSCUTUMPLAST FCTR 180



INSTALLATION


SURFACELOWER



ROLLSPER PALLET

SCUTUMPLAST FCTR 180 4 mm

PET

10 x 1 23

SCUTUMPLAST FCTR 180 MINERAL

4 mm on selvedge 7.5 x 1 23B

IС E


SCUDOCENE P EXTRA is a waterproof membrane made of distilled bitumen and elastomeric poly-olefi nes (POE). The products is reinforced with spunbond stabilized composite polyester.The Mineral version has the upper surface coated with coarse-grained slate and it is used mainly as a cap sheet.The product has an optimal dimensional stability and can be used in the most rigid weather conditions.

–20°CSCUDOCENE P EXTRA



INSTALLATION

PRODUCTTHICKNESS

WEIGHTUPPER

SURFACELOWER



ROLLSPER PALLET

SCUDOCENE P EXTR A 4 mm

PET

10 x 1 23

SCUDOCENE P EXTRA MINERAL 4.5 kg 10 x 1 20B

IС E

17

POLY

MER

-BIT

UM

EN

MEM

BR

AN

ES



SCUTUMPLAST P reinforced with composite stabilized spunbond polyester. The product has an excellent dimensional stability. Is used on civil and industrial decks, foundations, parcking, pre-fabricated, wooden or metal decks. The Mineral version is used mainly as a cap sheet, also in single layer roofi ng systems. The product has obtained ITC (DVT n. 0011).

-20°CSCUTUMPLAST P



INSTALLATION


SURFACELOWER



ROLLSPER PALLET

SCUTUMPLAST P 4 mm

PET

10 x 1 23

SCUTUMPLAST P MINERAL

4 mm on selvedge 7.5 x 1 23B

IС E

A

A


SCUDOPLAST 2 is an elastoplastomeric membrane obtained from distilled asphalt modifi ed with elastomeric and plastomeric polymers. Material is available with dual reinforcement of non-woven polyester and glass fi bre. The product features a good dimensional stability and mechanical perfor-mances and it is available only plane version. SCUDOPLAST P is an elastoplastomeric membrane obtained from distilled asphalt modifi ed with elastomeric and plastomeric polymers. The reinforcement is a composite polyester. Is used on a civil and industrial decks.

-15°CSCUDOPLAST



INSTALLATION

PRODUCTTHICKNESS

WEIGHTUPPER

SURFACELOWER



ROLLSPER PALLET

SCUDOPLAST 2 4 mm PET+V 10 x 1 20

SCUDOPLAST P

3 mm

PET

10 x 1 28

4 mm 10 x 1 23

5 mm 7.5 x 1 23

SCUDOPLAST P MINERAL

4.0 kg 10 x 1 23

4.5 kg 10 x 1 20

5.0 kg 7.5 x 1 23

B

B

B

B

I

I

I

С

С

E

E

18




SCUDOPLAST FCTR 160 is an elastoplastomeric type membrane obtained from bitumen modifi ed with elastomeric and plastomeric polymers. The reinforcement is a spunbond non-woven polyester. It is used on civil and industrial decks where high resistance to mechanical stresses is required.

-15°CSCUDOPLAST FCTR 160



INSTALLATION

PRODUCTTHICKNESS

WEIGHTUPPER

SURFACELOWER



ROLLSPER PALLET

SCUDOPLAST FCTR 160 4 mm

PET

10 x 1 23

SCUDOPLAST FCTR 160 MINERAL

4.0 kg 10 x 1 23

5.0 kg 10 x 1 20B

IС E

GAMMAGUM P is an elastoplastomeric type membrane obtained from distilled asphalt modifi ed with elastomeric resins and plastomeric polymers. The reinforcement is a composite spunbond polyester.

-10°CGAMMAGUM P



INSTALLATION


SURFACELOWER



ROLLSPER PALLET

GAMMAGUM P 4 mm PET 10 x 1 23B IС E

19

POLY

MER

-BIT

UM

EN

MEM

BR

AN

ES



GAMMAPLAST P is an elastoplastomeric type membrane obtained from distilled bitumen modifi ed with elastomeric and plastomeric polymers. The reinforcement is a composite polyester.

DELTAGUM P is a good quality APP (atactic polypropylene) polymer bitumen modifi ed membrane. The reinforcement is a composite spunbond polyester. Is used on civil and industrial decks.

-10°C

-10°C

GAMMAPLAST P

DELTAGUM P





INSTALLATION

INSTALLATION

PRODUCTTHICKNESS

WEIGHTUPPER

SURFACELOWER



ROLLSPER PALLET

GAMMAPLAST P3 mm

PET

10 x 1 28

4 mm 10 x 1 23

GAMMAPLAST P MINERAL

4.0 kg 10 x 1 23

4.5 kg 10 x 1 20


SURFACELOWER



ROLLSPER PALLET

DELTAGUM P 4 mm PET 10 x 1 23B

B

B

I

I

I

С

С

С

E

E

G

20



DELTAPLAST P is a good quality APP (atactic polypropylene) polymer bitumen modifi ed membrane. The reinforcement is a composite polyester. It is used on civil and industrial decks.

SIGMAPLAST P is an APP (atactic polypropylene) polymer bitumen modifi ed membrane. The rein-forcement is a composite polyester. It is used on civil and industrial decks.

-10°C

-10°C

DELTAPLAST P

SIGMAPLAST P





INSTALLATION

INSTALLATION

PRODUCTTHICKNESS

WEIGHTUPPER

SURFACELOWER



ROLLSPER PALLET

DELTAPLAST P3 mm

PET

10 x 1 28

4 mm 10 x 1 23

DELTAPLAST P MINERAL

4.0 kg 10 x 1 23

4.5 kg 10 x 1 20

PRODUCTTHICKNESS

WEIGHTUPPER

SURFACELOWER



ROLLSPER PALLET

SIGMAPLAST P3 mm

PET

10 x 1 28

4 mm 10 x 1 23

SIGMAPLAST P MINERAL

3.5 kg 10 x 1 25

4.0 kg 10 x 1 23

4.5 kg 10 x 1 20

B

B

B

B

I

I

I

I

С

С

С

С

E

E

G

G

G

21

POLY

MER

-BIT

UM

EN

MEM

BR

AN

ES



ECOPLAST P is an APP (atactic polypropylene) polymer bitumen modifi ed membrane. The reinforcement is a composite polyester. It is used on civil and industrial decks.

ECOPLAST V is an APP (atactic polypropylene) polymer bitumen modifi ed membrane. The reinforcement is a glass fi bre mat.

-5°C

-5°C

ECOPLAST P

ECOPLAST V





INSTALLATION

INSTALLATION

PRODUCTTHICKNESS

WEIGHTUPPER

SURFACELOWER



ROLLSPER PALLET

ECOPLAST P3 mm

PET

10 x 1 28

4 mm 10 x 1 23

ECOPLAST P MINERAL4.0 kg 10 x 1 23

4.5 kg 10 x 1 20


SURFACELOWER



ROLLSPER PALLET

ECOPLAST V

2 mm

V

15 x 1 28

3 mm 10 x 1 28

4 mm 10 x 1 23

B

B

I

I

С

С

С

E

G

22



OMEGA P - installation as the bottom layer of roof cladding, for waterproofi ng of engineering structures. OMEGA P can also be used as bottom layer in the multilayer system and foundation waterproofi ng according to EN 13969. OMEGA P MINERAL - iinstallation as the top layer of roof cladding on buildings and constructions.

TROPICAL P is an APP (atactic polypropylene) polymer bitumen modifi ed membrane.The reinforcement is a composite polyester.

TROPICAL V is an APP (atactic polypropylene) polymer bitumen modifi ed membrane. The reinforcement is glass fi bre mat.

0°C

-5°C

OMEGA

TROPICAL





INSTALLATION

INSTALLATION

PRODUCTTHICKNESS

WEIGHTUPPER

SURFACELOWER



ROLLSPER PALLET

OMEGA P

3.0 kg

PET

10 x 1

33

4.0 kg 25

4 mm 23

OMEGA P MINERAL

3.5 kg

10 x 1

33

4.0 kg 25

4.5 kg 23

PRODUCTTHICKNESS

WEIGHTUPPER

SURFACELOWER



ROLLSPER PALLET

TROPICAL P

3.0 kg

PET

10 x 1

33

4.0 kg 25

3 mm 28

4 mm 23

TROPICAL P MINERAL

3.5 kg 25

4.0 kg 25

4.5 kg 23

TROPICAL V3.0 kg

V33

4.0 kg 25

I

I

С

С

G

G

B

B

IС

С

E

G

BITUMEN MEMBRANES FOR SPECIAL APPLICATION

POLY

MER

-BIT

UM

EN

MEM

BR

AN

ES

24


SPECIAL APPLICATION MEMBRANES

TECHNONICOL ENVIRO - a new line of polymer-bitumen materials, created with care and keeping in mind future of our planet. The roof can have a real impact on the environment, help to purify the air in cities and have a positive impact on energy effi ciency. We prove that a roof can be green not only in colour.

TECHNONICOL ENVIRO AIR has a positive effect on the reduction of nitrogen oxides NOx in the air. The essence of the method consists in the oxidation of substances on the catalyst surface under the action of ultraviolet radiation. Harmful organic and inorganic pollutants, bacteria and viruses, ad-sorbed on the surface of TECHNONICOL ENVIRO AIR. The process is activated when UV-radiation from the sun hits the titanium dioxide particles, releasing energy for breaking down the NOx par-ticles. Polluted air passes over the TECHNONICOL ENVIRO AIR membrane where the NOx are con-verted into harmless levels of water, carbon dioxide and nitrates, which are washed away by the rain water.

TECHNONICOL ENVIRO WHITE helps to obtain the «Cool Roof» effect thanks to the surface with high solar refl ection. The solar refl ection of the material with a white surface is much higher than that of any other color. As a result, the roof covering is not heated and at the space under the roof (attic or utility room) remains at a comfortable temperature.

TECHNONICOL ENVIRO BLACK provides an energy-effi cient effect due to the fact that in winter during sunny days the roof covering with black surface absorbs the solar heat. As a result, the roof covering heated and, by heat exchange, the temperature in the space under the roof (attic or utility room) rises.

TECHNONICOL ENVIRO FOREST is polymer - bitumen waterproofi ng cap sheet with additives against the overgrowing with moss and vegetation. In case of precipitation it will be enriching cop-per ions, and copper has antifungal properties and inhibits the germination of mosses.

retains a beautiful roof view over a long period

removes as much NOx as a 1.200 m² green area

1.000 m² roof withENVIRO AIR material

reduces NOx from40 cars (27 km/car/day)

–25°CTECHNONICOL ENVIRO

Full specifi cations of the product is on the our website www. enviro-tn.com


in case of “B” application can be fastened mechanically with welding in the overlaps

INSTALLATION

PRODUCT WEIGHTUPPER

SURFACELOWER



ROLLSPER PALLET

ENVIRO AIR 5.0 kg

PET 8 x 1 23

ENVIRO WHITE 5.5 kg

ENVIRO BLACK 5.5 kg

ENVIRO FOREST 5.0 kg

A B

B

B

25

POLY

MER

-BIT

UM

EN

MEM

BR

AN

ES



SCUDOGARDEN PP is an APP modifi ed bitumen membrane with Preventol B-5 additives, a specifi c chemical substance with anti-roots properties.It incorporates the features of a spunbond non wo-ven polyester with high puncture resistance.

As opposed to traditional root resistant membranes, SCUDOGARDEN PP’s special additive means that the membrane is root resistant throughout its whole length, breadth and thickness, instead of having a polyester fi lm acting as a barrier where the roots can penetrate through the joints.

The product has passed the test according to UNI EN 13948. The certifi cation was released by the Institute of Horticulture, UAS Weihenstephan - Triesdorf.

–1O°CSCUDOGARDEN PP



INSTALLATION


SURFACELOWER



ROLLSPER PALLET

SCUDOGARDEN PP 4 mm PET 10 x 1 23С EF I

26



RADONSTOP is a waterproof made of distilled bitumen modifi ed with SBS polymers. It is reinforced with glassfi bre and aluminium foil. The absolute RADON BARRIER characteristics have been as-sessed by the CSI Institute with certifi cate n° 26/LFC/MAT/00.

RADONSTOP P is a waterproof membrane made of distilled bitumen modifi ed with elastoplastomericpolymers. It is reinforced with spunbond non-woven polyester. The good RADON BARRIER charac-teristics have been assessed by the CSI Institute with certifi cate n° 151/LFC/MAT/00.We recommend the use of RADONSTOP P together with RADONSTOP membrane as double layer in the renovation of old buildings.

–15°C

–10°C

RADONSTOP

RADONSTOP P





INSTALLATION

INSTALLATION


SURFACELOWER



ROLLSPER PALLET

RADONSTOP 4 mm V + A L 10 x 1 20


SURFACELOWER



ROLLSPER PALLET

RADONSTOP P 4 mm PET 10 x 1 23С I

I

DeadlyRadon

gas

MildewMoisture

Odors

RADONSTOP /RADONSTOP P

The membranes are used together in the double layer system. Designed for installation as radon gas protec-tion and waterproofi ng for base-ments and foundations. Ideal for installation as radon barrier for the indoor premises (basement, cellar and inner block walls and fl oor).

RADON BARRIER

27

POLY

MER

-BIT

UM

EN

MEM

BR

AN

ES



SCUDOBASE is an elastoplastomeric base sheet obtained distilled bitumen modifi ed with elasto-meric and plastomeric polymers. It has a rot proof non-woven polyester carrier which is coated with the compound on its upper surface only.

–10°CSCUDOBASE


Mechanical application

INSTALLATION

PRODUCT WEIGHTUPPER

SURFACELOWER



ROLLSPER PALLET

SCUDOBASE 1.2 kg PET 20 x 1 25С

Placedfreely

Glued on mastic

SCUDOVAPOR is a waterproofi ng membrane obtained using a compound of distilled bitumen modifi ed with elastomeric resins and plastomeric polymers. It is used as part of a multi-layer wa-terproofi ng system as a perfect vapour barrier. It incorporates the features of a fi ber glass mat and aluminium foil, suitable for use as a vapour barrier under heat insulation. It is particularly indicated for applications in buildings where these is a high relative humidity (in excess of 80% at 20°C).

–10°CSCUDOVAPOR



INSTALLATION

PRODUCTTHICKNESS

WEIGHTUPPER

SURFACELOWER



ROLLSPER PALLET

SCUDOVAPOR

2.0 kg

V+AL

15 x 1 30

3 mm 10 x 1 28

4 mm 10 x 1 23

H

Can be fastened mechanically

SCUDOPLUS P is a unique APP/SBS modifi ed bitumen membrane reinforced with a composite re-inforcement non-woven polyester. The dual compound, plastomeric on top and elastomeric on the bottom, provides the best performances from both polymers. This product is available with smooth or natural grey coloured mineral surface.

–25°CSCUDOPLUS P



INSTALLATION

PRODUCTTHICKNESS

WEIGHTUPPER

SURFACELOWER



ROLLSPER PALLET

SCUDOPLUS P 4 mm

PET

10 x 1 23

SCUDOPLUS P MINERAL 4.5 kg 10 x 1 20

С E I

B

28



FIX POINT ALU is an APP modifi ed bitumen membrane with the bottom patterned by bumps in such a way as to provide channels for moisture vapour to travel. Furthermore is suitable for use as avapour barrier. It incorporates a fi bre glass mat and aluminium foil.FIX POINT V is an APP modifi ed bitumen membrane. It incorporates the features of a fi ber glass mat and aluminium foil, suitable for use as a vapour barrier. The upper side presents bumps whichenable the insulation boards to be installed using heat-welding application.

–10°CFIX POINT



INSTALLATION

PRODUCT WEIGHTUPPER

SURFACELOWER



ROLLSPER PALLET

FIX POINT ALU 4.0 kg V+AL 10 x 1 16

FIX POINT V3.0 kg

V10 x 1 23

4.0 kg 10 x 1 16

H

С E

PERFOPLAST is specifi cally designed for use as the perforated venting underlay, ensures an even distribution of the points of adhesion. Used as the bottom layer of a torch applied built up roofi ng system, will provide a positive partial bond to prepared non-combustible substrates.PERFOPLAST is a perforated glass fi bre mat impregnated with a polymer bitumen compound.

–10°CPERFOPLAST


INSTALLATION

PRODUCT WEIGHTUPPER

SURFACELOWER



ROLLSPER PALLET

PERFOPLAST 0.8 kg V 30 x 1 25H


Placedfreely

The material is used in the construction of the new and renovation of an old damaged roof to prevent presence of bulges. It is possible due to vapor diffusion through the points of compound, presented on the bottom surface.

ADVANTAGES:

The application bumps on the bottom surface of the material equalizes the pressure of the vapor, that accumulates under the roof cladding.

Vapor is directed to roof aerators, installed in the quantity of 1 per 100 m2. Bulges do not form under the roof cladding. Is used in the construction of new roofs, especially in early spring and late autumn, as well as in the repair of old roofs.

29

POLY

MER

-BIT

UM

EN

MEM

BR

AN

ES



RE-COVER P DIFO is used in the renovation of an old damaged roof to prevent presence of bulges. The application of elastomeric strips that cover about the 40% of the bottom surface, is activated by torching. The material equalizes the pressure of the vapor, that accumulates under the roof clad-ding. Vapor is directed to roof aerators, installed in the quantity of 1 per 100 m2 (for d=110 mm.), and bulges do not form under the roof cladding. Material is produced by two-sided placing of modifi ed bitumen binder, consisting from bitumen, APP (atactic polypropylene) polymer modifi ed and mineral fi ller (talc, dolomite etc.), on the poly-ester base. The torchable side has the surface with longitudinal strips of the special elastomeric compound with some breaks as coveredby anti-adhesive polypropylene thin fi lm.

RE-COVER P is used in the renovation of an old damaged roof. Material is produced with top sidemodifi ed bitumen layer, consisting o f bitumen, APP (atactic polypropylene) polymer and mineralfi ller (talc, dolomite etc.), on the polyester base.The top surface is coated with a polypropylene fi lm while MINERAL version has a covering of naturalcoarse-grained slate. In both versions the lower surface is composed of a special heat-adhesive bitumen compound that adheres in an ideal way on the old waterproofi ng by torch-on application.





INSTALLATION

INSTALLATION

PRODUCTTHICKNESS

WEIGHTUPPER

SURFACELOWER



ROLLSPER PALLET

RECOVER P 5 KG MINERAL 5.0 kg

PET

7.5 x 1 23

RECOVER P 4 MM 4 mm 10 x 1 23

RECOVER P 3 MM 3 mm 10 x 1 23

–15°C

–15°C

RECOVER P DIFO

RECOVER P

PRODUCTTHICKNESS

WEIGHTUPPER

SURFACELOWER



ROLLSPER PALLET

RECOVER P DIFO 3 mm

PET

10 x 1 234 mm

RECOVER P DIFO 5 KG MINERAL 5.0 kg 7.5 x 1 23B

B

С

С

30



PRODUCT WEIGHTUPPER

SURFACELOWER



ROLLSPER PALLET

SCUDOART 4.5 kg PET 10 x 1 23

PRODUCT WEIGHTUPPER

SURFACELOWER



ROLLSPER PALLET

SCUDOART ADHESIVE 4.5 kg PET 10 x 1 23




INSTALLATION

INSTALLATION

SCUDOART is an elastoplastomeric membrane (APP) with high performance stabilized spun-bond polyester and mineral granules on top. Highest waterproofi ng performances together with premium quality roof decoration. Low slope and pitched roofs will be enhanced by elegant colorful design and long-lasting water protection.

SCUDOART membranes can be installed on all typical roof slopes, both commercial and residential, and can also be used in external vertical surfaces.

SCUDOART membranes provide the roof with an elegant fi nishing touch which blends per-fectly with different architectural surroundings.

SCUDOART membranes allow a higher speed of application and better waterproofi ng re-sults when compared with traditional roof coverings, i.e. shingles or tiles.

SCUDOART membranes give you a great performance at a lower price. SCUDOART membranes, as they are lighter in weight when compared to shingles and tiles, are perfect for refurbishment of roofs of old buildings, whether they are constructed of brick-cement of wood.

SCUDOART ADHESIVE is an elastoplastomeric membrane (APP) with high performance sta-bilized spunbond polyester and mineral granules on top. The bottom surface and the sel-vedge have the special self-adhesive bituminous compound covered with siliconized release fi lm, to be installed without use of gas fl ame. The product is fast applied by pressure directly onto the underlayer and on the self-adhesive selvedge of the adjoining roll, after releasing the protective siliconized fi lm.End lap joints can be fully welded using a hot air gun, melting the compound of both the lower(mineral) and upper sheet and pressing it directly onto the mineral surface of the lower sheet.MECHANICAL FIXING:It is recommended to use mechanical fasteners along the side laps of mineral sheets. The number of fasteners depends upon roof pitch, general wind conditions and the roof ar-eas where membranes are installed. On perimeter walls and vertical surfaces, nailing every 15÷20 cm is recommended. Place nails 5cm from edge.

-10°C

-10°C

SCUDOART

SCUDOART ADHESIVE

B

B

Self-adhesive material


31

POLY

MER

-BIT

UM

EN

MEM

BR

AN

ES



TILES BEAVER TAIL BRICK

PATTERNS & COLORS

APPLICATION

EXAMPLE OF APPLICATION

32



Used in cottage and low-rise building construction, both in reconstruction and in new buildings of various purposes as underlay waterproofi ng membrane in structures of pitched roofs for bitumen tile, composite tile, metal tile, bitumen corrugated sheets or natural tile.

Lightweight material is easy to install on the slope. Non-slip surface ensures safety works on the roof and UV protection. High quality bitumen-polymer compound has the property of «self-healing», which gives abso-lute tightness in places of nail penetration.

Due to the high heat resistance and fl exibility UNDERLAY PRO 500 retains the original proper-ties even when exposed to extreme temperatures.

UNDERLAY PRO 500 can be used as a temporary roofi ng. Versatility - material UNDERLAY PRO 500 is used on any type of roofi ng.

Protection surfaces of the material are made from polypropylene and sand, polypropylene (Spunbond), wich makes material non-slippery in different weather conditions. For easier installa-tion material has self-adhesive strips on both sides of the material.

-25°CUNDERLAY PRO 500


INSTALLATION

PRODUCT WEIGHTUPPER

SURFACELOWER



ROLLSPER PALLET

UNDERLAY PRO 500 S

0.5 kg PET 25 x 1 35

UNDERLAY PRO 500


Glued on mastic

G

33

POLY

MER

-BIT

UM

EN

MEM

BR

AN

ES



GAMMAGUM P 4.5 KG MINERAL FR is a fi re-resistant waterproof membrane made of APP modi-fi ed bitumen with fi re-retardant additives. The reinforcement is a composite spunbond polyester. The top surface has a covering layer of natural grey coarse-grained slate.

SCUDOCENE L20 5.0 KG MINERAL FR is a fi re-resistant waterproof membrane made of APP modi-fi ed bitumen and elastomeric polyolefi nes (POE). The products is reinforced with spunbond stabilized composite polyester. The top surface has a covering layer of natural grey coarse-grained slate. The product has an opti-mal dimensional stability and can be used in the most rigid weather conditions.

–10°C

–20°C

GAMMAGUM P

4.5 KG MINERAL FR

SCUDOCENE L20

5.0 KG MINERAL FR





INSTALLATION

INSTALLATION

PRODUCT WEIGHTUPPER

SURFACELOWER



ROLLSPER PALLET

GAMMAGUM P 4.5 KG MINERAL FR 4.5 kg PET 10 x 1 23

PRODUCT WEIGHTUPPER

SURFACELOWER



ROLLSPER PALLET

SCUDOCENE L205.0 KG MINERAL FR 5.0 kg PET 7.5 x 1 23A

BROOF t2

BROOF t2

B

B

34



Using a “fl oating fl oor“ to insulate against noise when walking.

FONOSCUDO /E

Acoustic insulation consisting of a triple layer: Heavyweight non-woven polyester fabric. A bituminous compound with sound-absorbing additives. Non-woven polypropylene fabric.

This product has an average thickness of around 8 mm, produced in rolls.

FONOTAPE

A strip of sound-absorbing elastomeric membrane with thickness of 4 mm, reinforced with non-wo-ven polyester fabric. This strip is used to prevent the transmission of impact and vibration to the fl oor. It is installed under dividing walls.

FONOFOAM

A separating strip about 5 mm thick made of adhesive polyethylene foam (AD) or non-adhesive foam with tape. The strip is used to prevent contact between fl oating screeds and vertical walls.

Additional accessories are available on request such as exterior or interior angle, pillar and door peri-metrical bands.

ACOUSTIC INSULATION

SOUND REDUCTION INDEX DYNAMIC RIGIDITY THICKNESS, mm ROLL SIZE m2 PER PALLET

28 dB s’ = 7 MN/m3 approx. 8 10 x 1 160

THICKNESS, mm WIDTH, mm LENGTH, m

4 140 / 200 / 250 / 330 10

THICKNESS, mm WIDTH, mm LENGTH, m

approx. 5 100 / 150 5


POLY

MER

-BIT

UM

EN

MEM

BR

AN

ES

36



SCUDOTENE BV ALU is a self-adhesive SBS modifi ed bitumen membrane, reinforced with fi ber glass mat and aluminium foil, suitable for use as a vapour barrier. Membrane is used where the standard torch-on application is forbidden (wooden base, extruded polystyrene foam). Can be used as underlay on the pitched roof.This smooth surface membrane is coated on top with polyethylene fi lm. Special bituminous ad-hesive compound, protected with easily removable siliconized fi lm, is used on the bottom surface.

ADVANTAGES:

Safety applicationThe membranes are applied without the use of fl ame and particular places are joined with hot air or adhesive bitumen mastics.

Speed and facility in useAfter accurate alignment of the sheets - simply remove the silicone fi lm (pre-cuted) and adhere the membrane to the surface.

Caring about the environmentThe use of cold-applied materials occurs without fl ue gas, odors and noise.

–25°CSCUDOTENE BV ALU



INSTALLATION


SURFACELOWER



ROLLSPER PALLET

SCUDOTENE BV ALU 2 mm V+AL 15 x 1 25HG


37

POLY

MER

-BIT

UM

EN

MEM

BR

AN

ES



Self-adhesive material for the installation as the bottom layer of roof cladding, for waterproofi ng of engineering structures. Membrane is used where the standard torch-on application is forbidden (wooden base, extruded polystyrene foam). Mineral version can be used as underlay on the pitched roof. Special bituminous adhesive compound, protected with easily removable siliconized fi lm, is used on the bottom surface.

ADVANTAGES:

Excellent resistance to UV raysThe polymer-bitumen compound (BPP) offers excellent resistance to UV and weathering.

Safety applicationThe membranes are applied without the use of fl ame and particular places are joined with hot air or adhesive bitumen mastics.

Speed and facility in useAfter accurate alignment of the sheets - simply remove the silicone fi lm (pre-cuted) and adhere the membrane to the surface.

Multifunctional useCan be installed directly on the heat-sensitive insulation panels (expanded polystyrene, extruded polystyrene, polyurethane). The membranes can be used both as an underlay or a fi nishing layer (smooth or MINERAL versions).

Caring about the environmentThe use of cold-applied materials occurs without fl ue gas, odors and noise.

The self-adhesive membranes SCUDOTENE PLUS P and SCUDOTENE BV ALU are innovative products designed for completely safe application. In fact, the special bitumen adhesive compound ensures the installation on the surfaces for which it is dangerous or for-bidden the use of fl ame ( torch-on application for traditional waterproofi ng membranes).

–15°CSCUDOTENE PLUS P



INSTALLATION

PRODUCTTHICKNESS

WEIGHTUPPER

SURFACELOWER



ROLLSPER PALLET

SCUDOTENE PLUS P3 mm

PET 10 x 1

25

4 mm 20

SCUDOTENE PLUS P MINERAL

3.5 kg 25

4.0 kg 23

HG

G

С

B


100%FLAMELESS INSTALLATION

38

REFERENCES

Olsztyn, Poland

WARMINSKA SHOPPING CENTER

Harjumaa, Estonia

SHOPPING CENTRE

Salaspils, Latvia

SALASPILS SPORTS CENTER

WATERPROOFING OF BRIDGES AND HIGHWAYS

POLY

MER

-BIT

UM

EN

MEM

BR

AN

ES

40


WATERPROOFING OF BRIDGE DECKS, VIADUCTS AND CAR PARKS

SCUDOPLAST CAR is a polyester reinforced elastoplastomeric membrane obtained from distilled bitumen modifi ed with elastomeric and plastomeric polymers.It is reinforced with a special high weight non-woven polyester giving very high mechanical performances. The product is suitable for waterproofi ng of bridge decks, viaducts and car parks. Certifi ed according to EN 14695.

–15°CSCUDOPLAST CAR



INSTALLATION


SURFACELOWER



ROLLSPER PALLET

SCUDOPLAST CAR4 mm

PET10 x 1 23

5 mm 7.5 x 1 23I JE

SCUTUMPLAST BIARMATO ( only plane version) is a very high quality APP (atactic polypropylene) polymer bitumen membrane. It has a double reinforcement consisting of a glass fi bre mat and a spunbond non-woven polyester. The product features excellent dimensional stability and mechani-cal performances. Is used on civil and industrial decks, foundations, parkings, pre-fabricated suitable to use on road and bridge decks, viaduct, etc. The product can also be used for single layer roof renewal.The product has obtained ITC (DVT n. 0011).

-20°CSCUTUMPLAST BIARMATO



INSTALLATION


SURFACELOWER



ROLLSPER PALLET

SCUTUMPLAST BIARMATO 4 mm V+PET 10 x 1 23IСA J

41

POLY

MER

-BIT

UM

EN

MEM

BR

AN

ES


WATERPROOFING OF BRIDGE DECKS, VIADUCTS AND CAR PARKS

SCUDOPLAST FCTR 180 is an elastoplastomeric type membrane obtained from bitumen modifi ed with elastomeric and plastomeric polymers. The reinforcement is a spunbond non-woven polyester. The difference between the materials is the weight of reinforcement.It is used on civil and industrial decks where high resistance to mechanical stresses is required.SCUDOPLAST FCTR 250 is mainly used on road engineering works and whenever high elasticity and mechanical resistance are required.

-15°CSCUDOPLAST FCTR



INSTALLATION

PRODUCTTHICKNESS

WEIGHTUPPER

SURFACELOWER



ROLLSPER PALLET

SCUDOPLAST FCTR 2504 mm

PET

10 x 1 23

5 mm 7.5 x 1 23

SCUDOPLAST FCTR 180 4 mm 10 x 1 23

SCUDOPLAST FCTR 180 MINERAL

4.0 kg 10 x 1 23

5.0 kg 10 x 1 20B

B

B

I

I

С

С

E

E

J

J

42

REFERENCES

Rīga, Latvia

OLYMPIC SPORTS CENTER

Kaunas, Lithuania

TRAUMA AND EMERGENCY CENTER

Tallinn, Estonia

HILTON HOTEL

SYNTHETIC MEMBRANES

SYN

THET

IC

MEM

BR

AN

ES

44

Synthetic membranes

ROOFING MEMBRANES

HOW DO WE PRODUCE OUR

MEMBRANES?

We produce waterproofi ng material with high technical characteristics thanks to:

Our own full cycle plant; Progressive extrusion production technology;

Highest quality European raw materials; Own research and development centres Careful and meticulous control before during and after production.

As a result, you get waterproofi ng mate-rial of homogeneous structure without internal defects, ensuring high standards of quality and durability.

CERTIFICATES AND AWARDS

Certifi cates of conformity accord-ing to increasing European standards (CE marking, EN 13956: 2005).

The conclusions of BDA Test Institute (The Netherlands) on the resistance to wind load.

Technical regulations and certifi cation on fi re safety requirements (Broof (t1), Broof (t3)).

Continuous up-dating and on-go-ing certifi cation programs in other European countries.

All our products have CE marked this guaranties the product’s conformity for European harmonized standarts. More than 42 mln. m2 of roofs, tunnels and foundations have been protected by various types of LOGICROOF waterproofi ng membranes, including key Olympic sites in Sochi, the 2018 World Cup stadiums for football and other objects with high demands on reliability and quality.

First place in the “fl at roof” competition held by the International Federation of roofers (IFD) in 2013 (sports complex “Olympic” in Moscow).

UNIQUE SERVICE FOR UNIQUE

MEMBRANE

Comprehensive approach enables us to provide personalized service to each cus-tomer at the highest level:

Wide range of solutions for each tech-nically different project;

A wide and complete range of acces-sories and components for each indi-vidual system;

On-site supervision and quality control during installation;

Technical advice to customers.

A VERSATILE TOOL FOR SOLVING

COMPLEX PROBLEMS

LOGICROOF synthetic membranes are the quintessence of more than 20 years of TechnoNICOL technical experience, dedi-cated specialists, engineers and technolo-gists whose daily work and objective is to embody the ideas ofcustomers: contrac-tors, architects, designers.The company is actively promoting turn-key solutions for waterproofi ng roofs, foundations and tunnels. Working with us, you get a complete system solution that is ideal for each individual project.

LOGICROOF membranes are used for, foundation waterproofi ng, tunnel waterproofi ng and roof waterproof-ing systems. As of the beginning of 2014, LOGICROOF membranes have ac-tively found their way into other European and extra European coun-tries for example “just to mention a few”, Romania, Slovenia, Italy and South Africa.

There is a wide range of synthetic mem-branes, which are distinguished by their area of application. The company TECHNONICOL offers the following:

ROOFING MEMBRANE

High elasticity for easy installation at low temperatures.

Resistance to punctures and mechanical damage.

Reliable protection from UV radiation through a system of TRI-P® protective special fi re retardants and stabilizers.

UNDERGROUND WATERPROOFING

The presence of a signal layer for the early detection of damage.

The ability to install material on uneven and wet concrete surfaces.

Resistance to punctures and mechanical damage High elasticity for easy installa-tion at low temperatures.

MEMBRANE FOR THE WATER-

PROOFING OF SWIMMING POOLS

AND LIQUID INTAKE STRUCTURES.

High hygienic characteristics. No need to use dangerous chemicals to care for your covering.

Resistance to UV radiation and preserve the bright colors of the long-term per-formance of the material.

ABOUT THE MATERIALS MATERIAL RANGE

45

SYN

THET

IC

MEM

BR

AN

ES

Synthetic membranes

ROOFING MEMBRANES

Rolls of LOGICROOF membrane are delivered to site on pallets All LOGICROOF membranes have a white labels identifying the membrane, its thickness, length and width.

Every roll is packed in additional individual pack.

Membrane rolls shall be stored lying down on pallets, and fully protected from moisture with clean canvas tarpaulins.

Minimum distance of 1 m from heater.

TRANSPORTATION AND STORAGE

EXAMPLES OF APPLICATION

INSTALLATION

1

5

3

7

2

6

4

8

1. Unroll LOGICROOF membrane and position with a 12 cm overlap for washers. LOGICROOF membrane is marked at the factory with seam overlap lines and fastener location markings for ease of installation. Half width rolls of membrane are available for use in the critical perimeter and corner areas of the building.

2. All surfaces to be welded shall be clean and dry. Use automatic electric hot welding equipment for weld seams. The speed, air fl ow and welding temperature of the LEISTER VARIMAT can be adjusted to accommodate changes in ambient temperature.

3. Release the lock on the gun mechanism, the nozzle will lay fl at on the roof membrane adjacent to the overlapping membrane. Slide the nozzle between the two membranes until the gun mechanism locks.

4. The machine will now travel automatically at the required setting.

5. Round off sharp edges with scissors. When possible, avoid creating multiple cross joints with more than three sheets.6. The back edge of the lap shall be welded with a thin, continuous pre-weld to prevent the loss of hot air during the fi nal welding.

Tack welding not permitted on fi eld sheets.7. The nozzle shall be inserted into the seam at a 45° angle to the edge of the membrane. Once the proper welding temperature has

been reached and the membrane begins to “fl ow”, the hand roller is positioned perpendicular to the nozzle and pressed lightly.8. Make a sample weld to test the temperature before starting work. Cut out a 1 cm section of the welded membrane. Apply pressure

to the weld by pulling on the two ends of the sheet as illustrated in the picture. The membrane must fail outside the welding seam.

46

Synthetic membranes

ROOFING MEMBRANES

Roof waterproofi ng membrane for single ply mechanically fastened exposed fl at roofs.LOGICROOF V-RP is a polyester reinforced multi-layer, obtained by co-extrusion, synthetic roof waterproofi ng sheet based on premium-quality plasticized polyvinyl chloride (PVC-P). The upper light grey layer is featured by a very high resistance to weather and UV rays, while the underlying black layer offers a high resistance to punchure.

Roof waterproofi ng membrane for single ply ballasted non-exposed fl at roofs. LOGICROOF V-GR is a fi bre glass reinforced multi-layer waterproofi ng membrane, obtained by co-extrusion, synthetic roof waterproofi ng sheet based on premium-quality plasticized polyvinyl chloride (PVC-P). The upper light grey surface is featured by a very high resistance to weather and UV rays, while the bottom black layer is highly resistant to puncture.

-35°C

-35°C

LOGICROOF V-RP

LOGICROOF V-GR



Application by hot air welding machines


INSTALLATION

INSTALLATION

PRODUCTTHICKNESS,

mmMASS, kg/m2

TENSILE STRENGTH L/T, N/50 mm

ELONGATION L/T, %

RESISTANCE TO IMPACT, mm


ROLLSPER PALLET

LOGICROOF V-RP

1.2 1.55

1100 / 900 ≥ 15

400 / 1500 25 x 2.05 33

1.5 1.95 200 / 2000 20 x 2.05 25

1.8 2.30 700 / 2000 15 x 2.05 23

2.0 2.70 700 / 2000 15 x 2.05 23

PRODUCTTHICKNESS,

mmMASS, kg/m2


ELONGATION L/T, %

RESISTANCE TO IMPACT, mm


ROLLSPER PALLET

LOGICROOF V-GR

1.5 1.85

1100 / ≥ 900 ≥ 1100

500 / 2000 20 x 2.05 18

1.8 2.20 700 / 2000 15 x 2.05 18

2.0 2.50 700 / 2000 15 x 2.05 18

47

SYN

THET

IC

MEM

BR

AN

ES

Synthetic membranes

ROOFING MEMBRANES

Flexible polyolefi n membranes (TPO/FPP) without reinforcement produced by co-extrusion.LOGICROOF P-SR is a waterproofi ng membrane without reinforcement, produced by co-extrusion of premium-quality thermoplastic polyolefi n (TPO/FPP).The upper face (top) is featured by a very high resistance to weather and UV rays, while the lower face (bottom) has a high resistance against punturing.

Roof waterproofi ng membrane for single ply mechanically fastened exposed fl at roofs.LOGICROOF P-RP is a polyester reinforced multilayer, synthetic roof waterproofi ng membrane ob-tain by co-extrusion of premium-quality thermoplastic polyolefi n (TPO). The upper face (beige) offers a very high resistance to weathering and UV rays, while the lower face (black), also known as signal layer, has a high resistance to puncturing.

-40°C

-40°C

LOGICROOF P-SR

LOGICROOF P-RP





INSTALLATION

INSTALLATION

PRODUCTTHICKNESS,

mmMASS, kg/m2


ELONGATION L/T, %

TEAR RESISTANCE, L/T, N


ROLLSPER PALLET

LOGICROOF P-SR

1.2 1.10 600/550

700 / 700

330/240

25 x 2.10

* 30 x 1.50 Upon request

141.5 1.37 650/600 450/400

1.8 1.64 750/750 550/500

2.0 1.82 800/800 650/600

PRODUCTTHICKNESS,

mmMASS, kg/m2


ELONGATION L/T, %



ROLLSPER PALLET

LOGICROOF P-RP

1.2 1.13

1100 / 1100 ≥ 25 500/50025 x 2.10

* 30 x 1.50 Upon request

141.5 1.37

1.8 1.67

2.0 1.85

48

Synthetic membranes

ROOFING MEMBRANES

Flexible polyolefi n membranes (TPO/FPP) without reinforcement laminated with a geo-textile fl eece. LOGICROOF P-FB is a waterproofi ng membrane without reinforcement laminated on the bottom with a non-woven polyester fabric, obtained by coextrusion of premium-quality thermo-plastic polyolefi n (TPO-PP). The upper face (top) is featured by a very high resistance to weather and UV rays, while the lower (bottom) has a high ristance against punturing.

Flexible polyolefi n membranes (TPO/FPP) reinforced with glass fi bre.LOGICROOF P-GR is a waterproofi ng membrane reinforced with a fi bre glass, obtained by co-ex-trusion of premium-quality thermoplastic polyolefi n (TPO-PP). The upper face (top) offers a very high resistance to weathering and UV rays, while the lower face (bottom) also known as signal layer, is highly resistant against puncturing.

-45°C

-40°C

LOGICROOF P-FB

LOGICROOF P-GR





INSTALLATION

INSTALLATION

PRODUCTTHICKNESS,

mmMASS, kg/m2


ELONGATION L/T, %



ROLLSPER PALLET

LOGICROOF P-FB

1.2 1.24

16 / 15 700 / 700

450/400

25 x 2.10 101.5 1.51 650/600

1.8 1.78 800/750

2.0 1.96 900/850

PRODUCTTHICKNESS,

mmMASS, kg/m2


ELONGATION L/T, %



ROLLSPER PALLET

LOGICROOF P-GR

1.2 1.10 600/550

700 / 700

390/290

25 x 2.10 141.5 1.37 650/600 450/400

1.8 1.64 750/750 500/450

2.0 1.82 800/800 600/550

SYNTHETIC MEMBRANES FOR SPECIAL APPLICATION

SYN

THET

IC

MEM

BR

AN

ES

50

Synthetic membranes


The membrane is designed for waterproofi ng of buildings and engineering structures.LOGICROOF T–SL polymeric membrane is a reliable waterproofi ng material, based on high-quality elastic polyvinylchloride (PVC).

The material has a yellow signal layer allowing for prompt and easy detection of waterproofi ng layer damage during the course of installation and/or transportation.

LOGICROOF T–PL membrane is used for waterproofi ng of tunnels, foundations, underground parts of buildings and structures as the second layer of two layer waterproofi ng systems based on PVC membranes with vacuum quality control. It is also used as a protection layer of LOGICROOF T–SL waterproofi ng PVC membranes.

Light green membrane. One of the material surfaces has special textured surface, which does not allow sticking of membranes together in two layer waterproofi ng systems in the course of vacuum quality control.

LOGICROOF P–SL (TPO) polymeric membrane is based on a thermoplastic polyolefi n and is distin-guished for its’s improved chemical stability and durability.The membrane is designed for waterproofi ng of buildings and engineering structures.

The material has an orange signal layer allowing the prompt and easy detection of waterproofi ng layer damage during the course of installation and/or transportation.

-45°C

-45°C

-50°C

LOGICROOF T-SL

LOGICROOF T–PL

LOGICROOF P-SL



INSTALLATION

PRODUCTTHICKNESS,

mmELONGATION,

%RUPTURE RESISTANCE

L/T, MPaIMPACT

RESISTANCE, mmSEAM TEAR

STRENGTH, N/50 mmDIMENSIONS

OF THE ROLL, mROLLS

PER PALLET

LOGICROOF T-SL1.5

300 16/151400

300 / 60020 x 2.0 18

2.0 1800 20 x 2.0 15

PRODUCTTHICKNESS,

mmELONGATION,

%RUPTURE RESISTANCE

L/T, MPaIMPACT

RESISTANCE, mmSEAM TEAR

STRENGTH, N/50 mmDIMENSIONS

OF THE ROLL, mROLLS

PER PALLET

LOGICROOF T-PL 1.6 300 12/11 700 300 / 600 20 x 2.0 18

PRODUCTTHICKNESS,

mmBREAKING

ELONGATION, %TENSILE YIELD

STRENGTH L/T, MPaTENSILE

STRENGTH, N/mmPENETRATION

RESISTANCE, mmDIMENSIONS

OF THE ROLL, mROLLS

PER PALLET

LOGICROOF P-SL1.5

638/672 22.4/23.9 125/129 ≥75020 x 2.1 18

2.0 20 x 2.1 18

51

SYN

THET

IC

MEM

BR

AN

ES

Synthetic membranes


Decorative and waterproofi ng covering for swimming pools.The best alternative to traditional fi n-ishes such as tiles or paint. LOGICPOOL consisting of two fl exible layers of high-quality polyvinyl-chloride interleaved with a reinforcing polyester mesh.

LOGICPOOL has a special additives in the bottom layer providing providing high resistance to mi-croorganisms infl uence (biodegradation). The LOGICPOOL membrane is atmosphere factors & UV rays resistant. It’s also resistant to usual operational additives for water conditioning systems, dosed according to special regulations for swimming pools.

Fire-free technology of installation; Protective layer resistant to microorganisms infl uence; No additional waterproofi ng compound; Easy to repair; Environment friendly and subject to recycling.

The PVC LOGICPOOL covering is laid in one layer and welded by hot air using automatic and/or manual device at the temperature from 380 °С to 450 °С until it forms a homogeneous (smooth) covering. Laying of LOGICPOOL covering is recommended at tem-peratures not below than +15°С.

The LOGICPOOL rolls are to be stored in horizontal position on pallets paralleled one another, at a dry place, at temperature not above +30°С, away from sources of heat and moisture. The material is stored in an original packaging. Protected from mechanical damage.

-45°CLOGICPOOL



INSTALLATION

PRODUCTTHICKNESS,

mmMASS, kg/m2


ELONGATION L/T, %



ROLLSPER PALLET

LOGICPOOL

1.5 1.85

1100 / 900 ≥ 1100

500/2000 20 x 2.05 25

1.8 2.20 700/2000 15 x 2.05 23

2.0 2.50 700/2000 15 x 2.05 23

52

Synthetic membranes


Synthetic waterproofi ng membrane produced by co-extruding a UV resistant elastomerized TPO thermoplastic olefi n and fl exible polypropylene alloy with a synthetic inorganic composite reinforc-ing mat.The membrane features contrasting colors on its upper and lower faces, providing a signal layer so that any damage occurring during or after installation will be immediately apparent.Membrane is designed specifi cally for:

Reservoirs supported by packed earth or cementitious surfaces Canals under fi xed protection Cement holding tanks for water Fish farming tanks



INSTALLATION

PRODUCTTHICKNESS,

mmMASS, kg/m2


ELONGATION L/T, %



ROLLSPER PALLET

LOGICROOF P-HYDRO

1.5 1.3515 / 15 600/600

450/40025 x 2.10 14

2.0 1.80 600/600

-40°CLOGICROOF P-HYDRO

53

SYN

THET

IC

MEM

BR

AN

ES

Synthetic membranes


Multilayer polyethylen fi lm - vapor barrier for fl at roofs designed to protect roof cladding against vapor formed inside the premises. Excellent water- and vapor resistance minimizing water penetra-tion into enclosing structures. Installed on concrete bases or on a profi le-shaped sheet under the insulant. Recommended for fl at roof systems.

A walking path is used for maintenance of footpaths on the roofs, made of PVC membranes.Available size 600 x 600 mm.Thickness of 9.3 mm.Packed on 100 items.

VAPOR BARRIER

WALKWAY PUZZLE


Placedfreely

INSTALLATION

PRODUCTDENSITY,

g/m2

BREAKING LOAD L/T, Н/5 cm

VAPOR PERMEABILITY,

g/(m2*day)

ELONGATION L/T, %

WATER-RESISTANCE PROPERY, WATER

COLUMN, m


ROLLSPER PALLET

VAPOR BARRIERFOR FLAT ROOFS 120 160/170 1.11 720/919 ≥ 2 6.0 x 42 Upon

request

54

REFERENCES

Liberec, the Czech Republic

AUTOSALON KUČERA

Klaipeda, Lithuania

KKKT - PASSANGERS AND CARGO TERMINAL

Łódź, Poland

SUKCESJA - TRADING CENTER

BITUMEN SHINGLES

BIT

UM

EN

SHIN

GLE

S

56

Bitumen tiles

SHINGLAS

Houses with roofs made of bitumen tiles SHINGLAS mesmerize with its harmony and grace. Using SHINGLAS you will enjoy not only the spectacular appearance of the roof, but also offering the best in convenience, quality and safety for many years. The roof will stand in any weather and will remain as bright as on the day it was mounted.

A laminated shingle has an ex-tra layer under its lower half. This makes its tabs twice as thick as they would be otherwise. Laminated shingles have a thicker, three-di-mensional appearance that makes it look more attractive than standard shingles. E.g.: Series Continent,

Western, Jazz, Country, Rancho. Material is light and easy to install and what is more important a war-ranty period is up to 60 years.

Collection of SHINGLAS fl exible shingle features a variety of shapes and colors. It allows designers to give any ensemble a magnifi cent architectural expression. For everyone who dreams of owning a beau-tiful house SHINGLAS helps to realize your innermost dreams. Technology of the bitumen tiles SHINGLAS is designed to meet all temperature, snow and wind loads in all climates.

Basalt covering, is used as the upper pro-tective layer of the material and has the following properties:

Natural stone is volcanic basalt; Protection from harmful sunlight and UV rays;

Protects roof covering from the impact of precipitation;

Prevents mechanical stress; Gives the roof color and texture.

The material has low heat conductiv-ity, therefore, under the roof of shingles is warm in winter and comfortable in summer. There are many types of bitumen tiles SHINGLAS, including it is different to the number of layers. Each type of covering has its own advantages.

Advantages of single layer shingles: Basalt coating stronger than steel – on the hardness scale the Mohs hardness of basalt is 7 units;

Natural basalt does not contain iron therefore not subject to corrosion;

Is suitable for all pitched roofs, includ-ing with complex geometry;

Rich color palette has been copied from the best painters and nature;

Natural basalt is not combustible, so basalt covering protects the house against the spread of fi re from neigh-bouring buildings through the roof.

Laminated shingles has all the advantages of single layer, increasing performance depending on the number of layers!

Each new layer is a new level of reliabil-ity in the protection against mechanical damage, leaks, wind;

Warranty up to 60 years; covering is made of natural Karelian ba-salt, extracted from an ancient volcano Girvas;

Basalt does not fade under UV light; Three-dimensional color - with each new layer pattern becomes 3D-effect;

Roof gets a special relief by shingles laminating.

DESCRIPTION SINGLE LAYER SHINGLES LAMINATED SHINGLES

57

Bitumen tiles

SHINGLAS

BIT

UM

EN

SHIN

GLE

S

jazz, country, rancho

trio, 3 tab

aссord

sonata, hexagonal

tango, beaver

delta

continent

western

349

335

317

333

333

1000

1000

1000

1000

1000

1000

1000 1000 1000

318

317

333

285quattro, 4 tab

NEW

NEW

SHAPES OF SHINGLAS CUTS

PHYSICAL AND MECHANICAL PROPERTIES

MAIN PHYSICAL AND MECHANICAL CHARACTERISTICS

CONTINENT WESTERN JAZZ COUNTRY RANCHO ULTRA CLASSIC STANDARDSTANDARD

ROCK

MANUFACTURING STANDARD EN 544 EN 544 EN 544 EN 544 EN 544 EN 544 EN 544 ETA

12/0264ETA

12/0264

BASE glass fi bre glass fi bre glass fi bre glass fi bre glass fi bre glass fi bre glass fi bre glass fi bre glass fi bre

TYPE OF MODIFIER — — — — — SBS — — —

WATER TIGHTNESS 100% 100% 100% 100% 100% 100% 100% 100% 100%

PACKAGE OF FINISHED ROOFING 1.5 m² 1.5 m² 2 m² 2.6 m² 2 m² 3 m² 3 m² 3 m² 3 m²

PACKAGE WEIGHT, kg 26.4 38.1 30 33.8 25 28.5 27.0-33.0*

25.5-31.5*

24.0–30.0*

INSTALLATION METHOD a a b b b a а, b а, b а, b

* depends on the shape of cuts (sonata, accord, trio, tango, delta) а – self-adhesion with mechanical fi xing to the roof base b – thermo adhesion with mechanical fi xing to the roof base

58

Bitumen tiles

SHINGLAS

INSTALLATION OF SHINGLAS

PREPARATION OF THE ROOFING DECK

When laying bitumen tiles over a wooden roof structure or structures of other types, the rafter span varies between 600 and 1500 mm depending on permanent and tempo-rary loads, as well as on the roof shape. Depending on the rafter span, a solid wooden deck of various thicknesses is used: waterproof plywood or Oriented Strand Boards (OSB-3), matchboards or trim boards (relative humidity not exceeding 20%). Board thickness – not exceeding 150 mm.When using trimmed board as laths, their maximum permissible span should not exceed 5 mm. When using plywood or OSB-3 boards as the deck, 3 mm spacing between the sheets should be left to counterbalance linear expansion in the summer time. The boards should be installed in a chess pattern, securing the edges with barbed or spiralshank nails.

WATERPROOFING UNDERLAYMENT

Additional underlayment under bitumen tiles SHINGLAS should be fi tted over the entire slope at any pitch of the roof.Self-adhesive waterproofi ng underlayment UNDERLAY PRO 500 or other material with the same characteristics should be fi tted along slope valleys and cornice eaves.Fasten the edge of self-adhesive underlayment at 0.5–2 cm from the outer edge of the eave drip. In a valley area it is laid at 1 m width (50 cm on each slope), at a cornice – lengthwise along the whole eave, at 2–3 cm from the edge and additionally a 60 cm distance from the fa-cade plane upwards. Lengthwise waterproofi ng is required for preven-tion of leakage in the cornice areas resulted from ice dams. Seamless val-ley is recommended, but if seams cannot be avoided, then overlapping areas of the valley membrane should not be less than 30 cm and must be glued especially tightly.Mechanically fi tted underlayment UNDERLAY PRO 500 or other material with the same characteristics can be applied over the rest of the slope, laying it from the bottom upwards, overlapping diagonally 100 mm and lengthwise 150 mm, moving the roll parallel along the cornice. The underlayment is nailed to the deck every 200–250 mm with special galvanized wide-head nails. The bitumenmastic No. 23 (FIXER) is applied over overlapping areas in strips with the width of 8–10 cm.

INSTALLATION OF EAVES AND SLOPE EDGES

Slope edges are reinforced with metal slope edges and eave drips, the latter are nailed to the waterproofi ng underlayment with a 30–50 mm overlapping, with special nails (span 120–150 mm, and overlapping areas – every 20–30 mm).When installing the eaves, water drips are nailed to OSB board, water-proof plywood or a deck of boards with a 30–50 mm overlap-ping, with special nails (span 120–150 mm, and overlapping areas – every 20–30 mm).Self-adhesive waterproofi ng underlayment along the eaves is laid over the water drip.

INSTALLATION OF A ROOF VALLEY

A roof valley can be installed in two ways: open and closed.

Open methodBitumen valley membrane is laid lengthwise over the bitumen underlay-ment UNDERLAY PRO 500 or other material with the same characteristicsalong the roof valley axis beginning 2–3 cm from the edge of the un-derlayment. Nails are fastened at a distance of 2–3 cm from the edge, every 20–25 cm; apply the bitumen mastic No. 23 (FIXER) on the bot-tom part of the valley membrane prior to nailing along entire perimeter lengthwise within a 10 cm strip.Seamless valley valley membrane is recommended, but if seams cannot be avoided, then overlapping areas of the valley membrane should notbe less than 30 cm and must be glued especially tightly. Joints shall be made in the upper part of the roof valley.

Closed methodIf this method is applied to install a roof valley, bitumen valley membrane is not used (see section: Installation of a closed roof valley).

RAFTER SPAN/ EXTRA RAFTER JOISTS, mm

OSB-3thickness in mm

PLYWOODthickness in mm

BOARD THICKNESS, mm

600 12 12 20

900 18 18 23

1200 21 21 30

1500 27 27 37

59

Bitumen tiles

SHINGLAS

BIT

UM

EN

SHIN

GLE

S

FASTENING OF SHINGLES

Nail every shingle to the roof deck with wide-head galvanized nails; the number of nails depends on the size of the slope. Correct nail-ing is extremely important – it should be done in such a way that a nail head is driven straight and fl ush with the shingle surface, but not driven too low. Nails should be nailed at a distance of 2–3 cm from the edge of shingle. The position of the bottom layer is shown by a dotted line. When installing shingles series CONTINENT, nails should be 45 mm-long.

STARTER ROW (HIP-RIDGE SHINGLE)

The starter row is laid using universal hip-ridge shingles or regular shingles, having cut off their tabs. These shingles are nailed to adhesive waterproofi ng underlayment. When installing shingles series CONTINENT, JAZZ, COUNTRY and RANCHO, regular shingles are used for a starter row without cutting the tabs off.

FIRST ROW OF SHINGLES AND FURTHER LAYING

If the slope is long, it is recommended to start laying the fi rst row from the middle of the slope, at 0.5-2 cm from the ridge-hip tile. The distance from the edge of the drip depends on the length and angle of the slope, i.e. the steeper and longer the slope, the bigger the distance from the edge.

The second row is laid above the fi rst one, shifting a shingle by a half of shingle sheet to the left or to the right, aligning the shingles according to upper part of the cutouts of the fi rst row shingles. The third and the next rows are laid over the second one shifting shingles by a half of shingle sheet to the left or to the right. The same pattern applies to installing the entire roofi ng.

To ensure maximum protection of the roof from cross rain, apply the bitumen mastic No. 23 (FIXER) within a 10 cm strip on the bottom side of the edge shingle. Cut the up-per corners (2–3 cm) of the edge shingles abutting the metal edge of the eave.

60

Bitumen tiles

SHINGLAS

JAZZ series

COUNTRY series

CONTINENT series

WESTERN series

Jazz series SHINGLAS is a premium product in-tended for original designer solutions. The multi-layered SHINGLAS has increased strength, wind resistance and durability, and adds volume to a roofi ng structure.

Triple layer laminated shingle CONTINENT – anoth-er step to the way of individuality and unique style. Voluminous, relief and exclusive roof sets the new standard for a special house where every detail re-fl ects the character of its owner.

Patented form, which does not have analogues in the world. Incredible holographic effect, embodied in classics. Beautiful colours and excellent technical characteristics – this is series WESTERN.

EN 544

EN 544

EN 544

EN 544

Laminated shingles series COUNTRY with extended range of colors help you to realize various architec-tural ideas and give to your roof wonderful three-dimensional image.

Castile

TerraCorrida BarcelonaIndigo

Seville Alicante Toscana

Arizona

Asia

Canyon

Texas

America

Klondike

Ontario

Africa

Niagara

Ohio

Europe

Prairie

Utah Michigan Atlanta Alabama

50

35

60

55

yearswarranty

yearswarranty

yearswarranty

yearswarranty

NEW

NEW

COLLECTION TOP

61

Bitumen tiles

SHINGLAS

BIT

UM

EN

SHIN

GLE

S

RANCHO seriesSeries RANCHO – the good choise for every house, for every roof. Earlier laminated shingle was consid-ered elite product. Today we make excellent quality and aesthetics affordable to everyone.

EN 544

EN 544

BrownRed Grey

20 yearswarrantyNEW

ULTRA seriesThe ULTRA series SHINGLAS is the only shingle made from asphalt using a SBS-modifi er which allows the material to attain excellent physical and mechanical properties and improves its frost resistance. Due to it‘s enhanced elasticity ULTRA is the best choice for very complex construction design.

25 yearswarranty

BrownRed Green

SONATA SAMBA

ACCORD JIVE

Grey Black

GreenRed GreyBrown Brown contrast

COLLECTION TOP

COLLECTION ULTRA

62

Bitumen tiles

SHINGLAS

CLASSIC series EN 544

The CLASSIC series SHINGLAS is a time tested traditional product which is very popular due to an optimum price-quality ratio. The CLASSIC series comes in the widest array of colors, making it possible to select roofi ng to match any architectural design. It is manu-factured using a high-quality asphalt binder.

Red BlackRed plusGreen AutumnBrown

15 yearswarranty

GreenRed Red-brownGrey BlackBrown

Grey BlackGreen BrownRed

BrownRed Green Grey Black

Green

Green

Red

Red

Grey

Grey

Brown

Brown

Black

Black Brown contrast

SONATA QUADRILLE

SONATA VERSALLES

ACCORD PRAGA

TANGO SUPER

TRIO SUPER / QUATTRO SUPER

DELTA

COLLECTION CLASSIC

63

Bitumen tiles

SHINGLAS

BIT

UM

EN

SHIN

GLE

S

STANDARD series ETA 12/0264

Red

Red

Black

Black

Grey

Grey

Green

Green

Brown

Brown

STANDARD series shingles are available in lots of shapes and colors. Created for people who want to feel confi dent they’re getting the best price.

10 yearswarranty

GreenRed Grey BlackBrown



HEXAGONAL

BEAVER

BEAVER PLUS

3TAB / 4TAB

DELTA

COLLECTION STANDARD

64

Bitumen tiles

SHINGLAS

STANDARD ROCK series ETA 12/0264

Red BlackGreyGreenBrown

Standard Rock series – economical choice with assured quality and reliability.

10 yearswarranty

GreenRed Grey BlackBrown



HEXAGONAL

BEAVER PLUS / BEAVER S PLUS

TRIO

DELTA

COLLECTION STANDARD

HEAT INSULATION MATERIALS

HEA

T IN

SULA

TIO

N

MA

TER

IALS

66

REFERENCES

Peetri, Estonia

TOWNHOUSE

Klaipeda, Lithuania

KLAIPEDA SMELTE - PASSANGERS AND CARGO TERMINAL

Radom, Poland

APLISENS PLANT FOR THE PRODUCTION OF TEST EQUIPMENT

STONE WOOL

HEA

T IN

SULA

TIO

N

MA

TER

IALS

68

Heat insulation materials

STONE WOOL

Stone wool is made from the charge gab-bro-basaltic stones with the addition of sedimentary of low acidity. Supplements are necessary to provide the desired plug-acidity, melting point and obtain a melt with the desired fl ow characteristics. For production use rocks of gabbro-basalt type and their analogs, sedimentary rocks, volcanic slag, industrial waste, in-cluding crushed blast furnace slag.

Technological processes are automated and strict quality control is implemented in all stages of production, from raw materials to fi nished product testing. It ensures stability of product properties. Ready-to-use products are safely pack-aged into a shrink fi lm.

A pallet with products is wrapped using stretch-hood technology, which reduces transportation and labor costs because of higher handling speed. But most im-portantly, this type of packaging does not get damaged when products are stored on the ground or in a construction site; the product does not lose its physical and mechanical properties in such storage conditions.

The quality management system of TechnoNICOL stonewool production is certifi ed according to ISO 9001:2000.The implementation of this certifi cation ensures effective company manage-ment in general as well as the output of products with stable qualitative charac-teristics that meet the requirements of the international markets and customer expectations.

The system of ecological management at all stone wool producing plants is certifi ed according to one more international stan-dard - ISO 14001:2004. The document is issued by a German certifying body - Deutsche Akkreditierungsstelle GmbH.This certifi cate confi rms that all the stages of managerial and production processes comply with the highest international re-quirements of environmental regulations.

Control of these processes guarantees thereduction of negative impacts upon the environment as well as waste reclamation and broke disposal, which, in turn, im-proves our environmental performance.

Stone wool is a highly effective insulating material. By heat effi ciency, it is ready to compete with the reference insulator – air in a stationary state. High resistance to heat transfer is achieved by retaining a large amount of air in a stationary state within the insulation using closely intertwined the fi nest fi bers of mineral wool.

TECHNONICOL heat insulation based on stone wool is popular because of its technical and perfor-mance advantages, created during the production stage. Competitive price, uncompromising quality and numerous operational advantages made TECHNONICOL basalt-based non-fl ammable insulation to be the best choice for our customers.

The use of thermal insulation materials is an obligatory stage of many construction and repair processes. Wide range of TECHNONICOL stone wool production is divided by area of applica-tion and allows the use of products in both civil and private housebuilding. The product range includes insulation for plaster and ventilated facades, pitched and fl at roofs, fl oors, walls, etc.

Standard slabs of stone wool are used for heat- and acoustic insulation.

Slabs with grooves are used for a heat-insulation of fl at roofs with the organiza-tion of system of ventilated channels.

Slabs with a rough surface are used to in-crease adhesion to the protective layer of plaster in the heat insulation of facades.

Slabs “slope” shaped are used to install the slope on the fl at roof, to drain the wa-ter on the roof to the funnels.

FROM WHAT IT IS MADE? PRODUCTION QUALITY RANGE OF MATERIALS

69

HEA

T IN

SULA

TIO

N

MA

TER

IALS


STONE WOOL

Long experience, modern equipment, continuous technology perfection and innovations made by the proprietary Research Center allow TechnoNICOL to manufacture stone wool products of stable high quality.

EFFECTIVE HEAT INSULATION

TECHNONICOL stone wool is a high-effi -ciency heat insulation material. High re-sistance to heat transmission is achieved because the fi nest intertwined mineral wool fi bers retain a large amount of air inside the material.

FIRE SAFETY

The main raw material of stone wool products is gabbro-basalt rocks. Thanks to this, all TECHNONICOL products are non-fl ammable. The fi ber melting tem-perature exceeds 1000°C, which makes itpossible to use the stone wool products in a wide range of working temperatures.

DIMENSIONAL STABILITY

High mechanical stress resistance of TECHNONICOL materials is ensured by the fi ber properties and stone wool struc-ture. These parameters are set individually for each type of material, depending on the heat insulation’s intended use.

VAPOR PERMEABILITY

Vapor permeability of TECHNONICOL stone wool is high, materials do not retain the moisture coming from the premises in the form of vapor created by human ac-tivities. The heat insulation remains dry practically always.

POWERFUL SOUND ABSORPTION

The fi brous structure of stone wool products secures excellent acoustic and sound-absorbing properties of the mate-rial. TECHNONICOL products have high sound-absorbing ratios in the broad range of frequencies, which decreases the level of airborne and impact noise in various sound-insulating structures: par-titions, fl oors and others.

WATER REPELLENCY

All TECHNONICOL heat insulation materi-als based on stone wool are treated with water-repelling agents that give water-repellent properties to the insulation.The presence of moisture in the insulation affects its heat properties, term of service and the indoor climate. If a heat insulation damp, usually, the it needs to be replaced.

CHEMICAL RESISTANCE

TECHNONICOL products are manufac-tured of basalt stone. Natural minerals of this group are notable for their high chemical resistance to various substances:oils, solvents, paints, acidic and alkaline. Stone wool can be safely used together with any types of construction materi-als as well as corrosive fi lters in many branches of chemical industry.

BIOSTABILITY

TECHNONICOL products fully meet the biological stability criteria, which was proved with numerous tests and trials as well as with the fi eld data.Stone wool canoffset the effect of various macro- and microorganisms: the material does not provide conditions for the vitalactivity of bacteria, mold, fungi, and is not attractive as an environment for in-sects and rodents.

ECOLOGICAL COMPATIBILITY

Environment safety is one of priorities and a goal of innovations. The company’s plants reuse the production waste. Being one of the major European mineral wool producers, TechnoNICOL constantly improves its products and services, using modern equipment and implementing eco-friendly technologies.

All the products comply with sanitary and environmental standards, are safe for hu-man health and nature, passed the com-plete cycle of certifi cation, both obliga-tory and optional.

PROPERTIES

70


STONE WOOL

TECHNOVENT slabs are designed to be used in industrial and civil construction as a heat- and sound insulating layer in ventilated facade systems.

Heat - and sound insulation of engineering structures of residential buildings and industrial facilities where heat insulation is not under external load (mansards, garret fl oors, fl oors with heater packing between logs, frame partitions), and also as the fi rst (internal) heat-insulation layer in the facade systems with an air gap, for two-layer heat insulation.

TECHNOFACADE slabs are intended for use in civil and industrial construction as heat and sound insulation in systems for the external heating of walls with a protective decorative layer made of thin plaster coating.




1-layer system

1-layer system

1-layer system


2-layer system



INSTALLATION

INSTALLATION

INSTALLATION

PRODUCTHEAT CONDUCTIVITY,

λd, W/m*CCOMPRESSION

STRENGTH, 10%, kPaDENSITY,

kg/m3

THICKNESS, mm (increments 10 mm)

LENGH, mm WIDTH, mm

TECHNOVENT STANDARD 0.035 10 72-88 40 - 200 1000, 1200 500, 600




kg/m3


LENGH, mm WIDTH, mm

TECHNOLITE EXTRA 0.03920

30-3850 - 200 1000, 1200 500, 600

TECHNOLITE OPTIMA 0.040 34-42




kg/m3


LENGH, mm WIDTH, mm

TECHNOFACADE 0.03740

131-159 60 - 1601000, 1200 500, 600

TECHNOFACADE EFFECT 0.039 131-135 50 - 150

TECHNOVENT

TECHNOLITE

TECHNOFACADE

71

HEA

T IN

SULA

TIO

N

MA

TER

IALS


STONE WOOL

TECHNOBLOCK slabs are intended for use in civil and industrial construction as heat and sound insu-lation in systems for the different types of layered masonry, timber frame walls with various fi nishes, including siding. The insulation TECHNOBLOCK also used as the inner insulating layer in the facade systems with air gap in a two-layer insulation.

Used in civil and industrial construction as a heat-insulation layer for new construction and recon-struction of various buildings and structures. The slabs are designed to be used as the top heat-insulation layer in coverings made of reinforced concrete or metal profi le-shaped fl ooring with roof cladding of roll and mastic materials, including without protective underlayments. Recommended to be applied in combination with TECHNOROOF N or TECHNOROOF slabs.



top layer of system


INSTALLATION

INSTALLATION




kg/m3


LENGH, mm WIDTH, mm

TECHNOBLOCK STANDARD 0.040 8 40-50 40-200 1000, 1200 500, 600




kg/m3


LENGH, mm WIDTH, mm

TECHNOROOF V50

0.038

50 155-185 40-50

1200, 2400 600, 1200TECHNOROOF V60 60 165-195 40-50

TECHNOROOF V70 70 175-205 60-100

TECHNOBLOCK

TECHNOROOF V

1-layer system

2-layer system


TECHNOROOF N slabs are designed to be used as the basic heat-insulation layer in coverings made of reinforced concrete or metal profi le-shaped fl ooring with all types of roof cladding, including with-out protective underlayments, in civil and industrial applications in new construction and reconstruc-tion of various buildings and structures. Recommended to be applied in combination with TECHNOROOF V.


bottom layer of system


INSTALLATION




kg/m3


LENGH, mm WIDTH, mm

TECHNOROOF N30

0.036

30 100-130 50-200

1200, 2400 600, 1200TECHNOROOF N35 35 105-135 50-200

TECHNOROOF N40 40 110-140 50 -140

TECHNOROOF N

72


STONE WOOL

The slabs TECHNOROOF Ng (with ventilation grooves) are designed to be used as the heat-insulation layer at new construction and reconstruction of buildings and constructions of different function. Slabs TECHNOROOF Ng are intended for a heat insulation of fl at roofs with the organization of sys-tem with ventilated channels. Slabs are recommended to be applied in a combination with the TECHNOROOF V.

The slabs TECHNOFLOOR are used for heat- and sound insulation of fl oating fl oors at applica-tion of concrete or cement screed directly onto the insulation. Floor insulation with stone wool TECHNOFLOOR allows to create excellent protection against impact noise. Among its advantages are low moisture absorption and good resistance to pests and rodents. Basalt insulation for the fl oor has a high level of heat stability and excellent performance of heat and sound insulation.







INSTALLATION

INSTALLATION




kg/m3


LENGH, mm WIDTH, mm

TECHNOROOF N30g

0.036

30 100-130 80-200

1200, 2400 600, 1200TECHNOROOF N35g 35 105-135 80-200

TECHNOROOF N40g 40 110-140 80 -140




kg/m3


LENGH, mm WIDTH, mm

TECHNOFLOOR STANDARD 0.044 25 99-121 30-50 1000, 1200 500, 600

TECHNOROOF Ng

TECHNOFLOOR

To be used as the basic heat-insulation layer in coverings made of reinforced concrete or metal pro-fi le-shaped fl ooring with all types of roof cladding, including without protective underlayments, in civil and industrial applications in new construction and reconstruction of various buildings and structures.




INSTALLATION




kg/m3


LENGH, mm WIDTH, mm

TECHNOROOF 45 0.039 45 125-155 40-150 1200, 2400 600, 1200

TECHNOROOF

EXTRUDED POLYSTYRENE

HEA

T IN

SULA

TIO

N

MA

TER

IALS

74


EXTRUDED POLYSTYRENE T E C H N O N I C O L

Extruded polystyrene slabs are produced by mixing polystyrene beads at an el-evated temperature and pressure with the introduction of the blowing agent and subsequently extruding from the extruder. Due to the structure of XPS TECHNONICOL has good thermal insula-tion and high compressive strength, does not absorb water, does not shrink and swell, rot and chemically resistant.

Due to the improved physical and me-chanical properties, TechnoNICOL ex-truded polystyrene production has excel-lent energy-saving performance.

The extensive use of the material caused by the unique and valuable properties, combined in one material: a low heat conductivity, high strength, biological re-sistance, ecological compatibility and du-rability of use.

We strive to make the perfect product - the most reliable, convenient to operate and profi table in all respects.

The extruded polystyrene TechnoNICOL CARBON produced on modern equipment.

The production lines are equipped with a computer control system. On each plant is set research laboratory, carrying out a continuous multistage quality control of the products.

All production range TechnoNICOL has all the necessary hygiene certifi cates.

In the production uses only the primary raw materials obtained from reliable suppliers.

The extruded polystyrene slabs TECHNONICOL CARBON ECO has passed voluntary certifi cation “Leaf of Life”, which confi rms the safety of housing construction.

TechnoNICOL company specialists developed a unique technology for producing extruded polystyrene slabs with nanoscale carbon materials. This will signifi cantly increase the heat effi ciency of the material to increase its strength, provide a low coeffi cient of water absorption.

Extruded polystyrene is one of the most effi cient heat insulation ma-terials in the construction market and it is widely used for heat insu-lation of foundations, roofs, fl oors, pipelines, roads and railways.

The use of heat insulation materials is an obligatory stage of many construction and repair processes. Wide range of TECHNONICOL XPS pro-duction is divided by area of application and allows the use of products in both civ-il and private housebuilding. The product range includes insulation for plaster and ventilated facades, pitched and fl at roofs, fl oors, walls, etc.

Standard slabs.

Slabs with grooves are used for is used in construction to provide wall drain-age and additional heat insulation of the foundation.

Slabs with a rough surface are used to in-crease adhesion to the protective layer of plaster in the heat insulation of facades.

Slabs “slope” shaped are used to install the slope on the fl at roof, to drain the wa-ter on the roof to the funnels.

FROM WHAT IT IS MADE? PRODUCTION QUALITY RANGE OF MATERIALS

75

HEA

T IN

SULA

TIO

N

MA

TER

IALS



EFFECTIVE HEAT INSULATION

TECHNONICOL extruded polystyrene has a uniformly distributed closed-cell struc-ture. Thanks to it provides high thermal properties and physical and mechanical properties.

HIGH FROST RESISTANCE

Extruded polystyrene may be used in the temperature range from -70 to +75 °C, it allows the use of material in all climatic areas of Europe.

HIGH STRENGTH

The strength of extruded polystyrene TECHNONICOL CARBON is from 25 to 50 t/m2, it is fully complies with the most stringent requirements for heat insulation materials.

SUSTAINABLE

All TECHNONICOL materials are subject to strict sanitary and epidemiological control to obtain the corresponding conclusions.

USEFUL LIFE 40 YEARS

Extruded polystyrene TECHNONICOL CARBON has high performance charac-teristics: durability is at least 40 years.

MINIMAL WATER ABSORPTION

Slabs TECHNONICOL CARBON have min-imal water absorption, so its insulating properties remain unchanged throughout the life cycle.

EASY INSTALLATION

The slabs of extruded polystyrene are eas-ily cut, quickly and securely installed using adhesives or mechanical fasteners.

BIO-RESISTANT TO MOLD FUNGI

Extruded polystyrene is TECHNONICOL CARBON biological stability to molds - the most active destructors.

EXACT DIMENSIONS

The accuracy of the geometric dimensions of heat insulation boards can improve the speed of installation, quality of work.

RESISTANT TO RODENTS

Extruded polystyrene TECHNONICOL CARBON not a breeding ground for rodents.

Constantly increasing production capac-ity, continuously improving technology and processes, we were able to signifi -cantly reduce costs, reduce the density of the product (the main factors affecting the cost of production) while improving key performance extruded polystyrene.

PROPERTIES

76



Extruded polystyrene TECHNONICOL CARBON ECO is designed for heat insulation of basements and cellars, heated fl oors, fl oors on the ground, insulation of cold bridges in panel construction.

Extruded polystyrene TECHNONICOL CARBON PROF 300 is an up–to–date heat insulating material widely used in building and construction while arranging heat protection of the basement, roofs, fl oors, facades, heat insulation of railways and highways.

F (facade) - are heat insulation boards with a special milled surface used for heat insulation of plaster facades and pedestals. It can also be used for other constructions where raised require-ments to adhesion of heat insulation boardsto foundations are set.

D (drainage) - is used in construction to provide wall drainage and additional heat insulation of the foundation con-structions, as well as fl at roofs to im-prove water run-off and set up micro ventilation.

SLOPE - slabs “slope” shaped are used to install the slope on the fl at roof, to drain the water on the roof to the funnels.



Installation using adhesives




INSTALLATION

INSTALLATION

THICKNESS, mm

HEAT CONDUCTIVITY, COMPRESSION


kg/m3

LONG TERM WATER ABSORPTION, %

LENGH, mm WIDTH, mm

RD, m²*К/W λD, W/m*C IMMERSION DIFFUSION

20 0.571

0.034 200 29.0-32.0 ≤ 0.7 ≤ 3.0 1180-5400 58030 0.857

40 1.143

THICKNESS, mm

HEAT CONDUCTIVITY, COMPRESSION


kg/m3

LONG TERM WATER ABSORPTION, %

LENGH, mm WIDTH, mm

RD, m²*К/W λD, W/m*C IMMERSION DIFFUSION

50 1.428

0.034 300 30.1-38.0 ≤ 0.7 ≤ 3.0 1180-4500 580

60 1.714

70 1.945

80 2.286

100 2.778

TECHNONICOL CARBON ECO

TECHNONICOL CARBON PROF 300


HEA

T IN

SULA

TIO

N

MA

TER

IALS

78



Heat insulation system supplied in rolls or panels consisting by extruded polystyrene laminated to an elastoplastomeric bituminous membrane with glass fi bre or non-woven polyester reinforcement.

The general physical and chemical properties of the extruded polystyrene are: fi re-retardant; excellent and constant insulating quality; fungal, insect and bacteria attack resistant; high compression resistance; no water absorption.

For the high compression resistance it can be used on fl at decks also with concrete slab paving.The insulation can be applied in some different ways. It can be fi xed using mechanical fasteners or by torching the vapour barrier and sticking the insulation material to the molten compound if a gravel layer or similar ballast will be used.

SCUDOTHERM XPS

THICKNESS,MM DIMENSIONS ROLL/PANEL, m HEAT RESISTANCE RD (M2 K/W)

30 7.5 x 1 0.85

40 6 x 1 1.15

50 5 x 1 1.45

*60 slab 1.2 x 1 1.75

*80 slab 1.2 x 1 2.15

*100 slab 1.2 x 1 2.70

* At the thickness more than or equal to 60 mm material is provided in slabs.

THICKNESS, mm

CHARACTERISTICS TEST METHOD 30÷60 > 60

Declared heat conductivity at temperature of 10 °C, W/(m K) λD UNI EN 13163 0.034 0.037

Compressive strength at 10% linear deformation, kPa CS (10\Y) UNI EN 826 200

Vapour permeability coeffi cient μ UNI EN 12086 100÷200

Dimensional stability in specifi c conditions of temperature and humidity, % DS(N) UNI EN 1604 < 2

Temperature limit of use, °C – EN 12089 75

Long term water absorption by immersion, % WL(T) UNI EN 12087 ≤ 1.5

Reaction to fi re, Euroclasse – EN 13501-1 E




INSTALLATION

79

HEA

T IN

SULA

TIO

N

MA

TER

IALS



Heat insulation system supplied in rolls or panels consisting by expanded polystyrene laminated to an elastoplastomeric bituminous membrane with glass fi bre or non-woven polyester reinforcement.

The general physical and chemical properties of the expanded polystyrene are: fi re-retardant; fungal, insect and bacteria attack resistant; low water absorption also during immersion.

It can be fi xed using mechanical fasteners, or with special cold adhesives or by torching the vapour barrier and sticking the insulation material to the molten compound if a gravel layer or similar ballast will be used.

SCUDOTHERM EPS

THICKNESS,MM DIMENSIONS ROLL/PANEL, mHEAT RESISTANCE RD (M2 K/W)

EPS 150 EPS 120 EPS 100 EPS 80

20 10x1 0.59 0.57 0.56 0.53

30 7.5 x 1 0.88 0.86 0.83 0.79

40 6 x 1 1.18 1.14 1.11 1.05

50 5 x 1 1.47 1.43 1.39 1.32

*60 slab 2 x 1 1.76 1.71 1.67 1.58

*70 slab 2 x 1 2.06 2.00 1.94 1.84

*80 slab 2 x 1 2.35 2.29 2.22 2.11

*90 slab 2 x 1 2.65 2.57 2.50 2.37

*100 slab 2 x 1 2.94 2.86 2.78 2.63

*110 slab 2 x 1 3.24 3.14 3.06 2.89

*120 slab 2 x 1 3.53 3.43 3.33 3.16


CHARACTERISTICS TEST METHOD EPS 150 EPS 120 EPS 100 EPS 80

Declared heat conductivity at temperature of 10 °C, W/(m K) λD UNI EN 13163 0.034 0.035 0.036 0.038

Compressive strength at 10% linear deformation, kPa CS (10\Y) UNI EN 826 ≥ 150 ≥ 120 ≥ 100 ≥ 80

Vapour permeability coeffi cient μ UNI EN 12086 30÷70 30÷70 30÷70 20÷40

Dimensional stability in specifi c conditions of temperature and humidity, %

DS(N) UNI EN 1604 ±2 ±2 ±2 ±2

Bend strength BS EN 12089 ≥ 150 ≥ 120 ≥ 100 ≥ 80

Long term water absorption by immersion, % WL(T) UNI EN 12087 ≤ 2.0 ≤ 2.0 ≤ 2.0 ≤ 2.0

Reaction to fi re, Euroclasse – EN 13501-1 E E E E




INSTALLATION

80



Heat insulation system supplied in rolls or panels consisting by expanded polystyrene with graphite and coupled with an elastoplastomeric bituminous membrane with glass fi bre or non-woven poly-ester reinforcement.The addition of graphite powders in the raw material increase the heat resistance of the product.

The general physical and chemical properties of the expanded polystyrene are: fi re-retardant; fungal, insect and bacteria attack resistant; low water absorption also during immersion.

It can be fi xed using mechanical fasteners, or with special cold adhesives or by torching the vapour barrier and sticking the insulation material to the molten compound if a gravel layer or similar ballast will be used.

SCUDOTHERM EPS/GR


EPS/GR 150 EPS/GR 100

40 6 x 1 1.33 1.29

50 5 x 1 1.67 1.61

*60 slab 2 x 1 2.00 1.93

*80 slab 2 x 1 2.66 2.58

*100 slab 2 x 1 3.33 3.22

*120 slab 2 x 1 4.00 3.87


CHARACTERISTICS TEST METHOD EPS/GR 150 EPS/GR 100

Declared heat conductivity at temperature of 10 °C, W/(m K) λD UNI EN 13163 0,030 0,031

Compressive strength at 10% linear deformation, kPa CS (10\Y) UNI EN 826 ≥ 120 ≥ 100

Vapour permeability coeffi cient μ UNI EN 12086 30÷70 30÷70

Dimensional stability in specifi c conditions of temperature and humidity, % DS(N) UNI EN 1604 1 1

Bend strength BS EN 12089 150 150

Long term water absorption by immersion, % WL(T) UNI EN 12087 ≤ 3.0 ≤ 3.0

Reaction to fi re, Euroclasse – EN 13501-1 E E

Heat capacity, J/kgK Cp EN 10456 1450 1450

Temperature limit of use,°C – 75 75




INSTALLATION

81

HEA

T IN

SULA

TIO

N

MA

TER

IALS



Heat insulation system supplied in rolls consisting of strips of the stone-wool covered with two sheet of bituminous felt laminated to an elastoplastomeric bituminous membrane with glass fi bre or non-woven polyester reinforcement.

The panel is available in three versions MW/H150, MW/M120 and MW/L100.Stone wool is a stable, non-combustible. The fi bers in the product SCUDOTHERM MW are upright to provide better resistance to compression.

It can be fi xed using molten oxidised bitumen for a quantity of 1.5 kg/m2 or using mechanical fasteners, generally a minimum of 5 fasteners per square metre should be used, or by torching the vapour barrier and sticking the insulation material to the molten compound if a gravel layer or similar ballast will be used.

SCUDOTHERM MW


MW/H150 MW/M120 MW/L100

20 10 x 1 0.52 0.52 0.52

30 7.5 x 1 0.63 0.63 0.63

40 6 x 1 0.83 0.83 0.83

*50 slab 1.2 x 1 1.04 1.04 1.04

*60 slab 1.2 x 1 1.25 1.25 1.25

*70 slab 1.2 x 1 1.46 1.46 1.46

*80 slab 1.2 x 1 1.67 1.67 1.67

*90 slab 1.2 x 1 1.88 1.88 1.88

*100 slab 1.2 x 1 2.08 2.08 2.08


CHARACTERISTICS TEST METHOD MW/H150 MW/M120 MW/L100

Declared heat conductivity at temperature of 10 °C, W/(m K) λD UNI EN 12667

UNI EN 12939 0.035 0.033 0.033

Heat resistance, (m2K)/W R -

25 mm 0.52

30 mm 0.62

40 mm 0.83

50 mm 1.04

60 mm 1.25

70 mm 1.46

80 mm 1.67

Vapour permeability coeffi cient μ UNI EN 12086 1 1 1

Compressive strength at 10% deformation (40 mm), kg/cm2 - UNI 6350 0.6 0.5 0.4

Long term water absorption by immersion, % WL(T) UNI EN 12087 < 3.0 < 3.0 < 5.0

Reaction to fi re, Euroclasse – EN 13501-1 A1 A1 A1




INSTALLATION

82



Heat insulation system supplied in rolls or panels consisting by expanded polyurethane covered on both sides by saturated fi bre glass and coupled an elastoplastomeric bituminous membrane with glass fi bre or non-woven polyester reinforcement.

The general physical and chemical properties of the expanded polyurethane are: fi re-retardant; excellent thermal insulation; excellent mechanical resistance to compression; fungal, insect and bacteria attack resistant.

It can be fi xed using molten oxidised bitumen for a quantity of 1.5 kg/m2 or using mechanical fasteners, generally a minimum of 5 fasteners per square metre should be used, or by torching the vapour barrier and sticking the insulation material to the molten compound if a gravel layer or similarballast will be used.

SCUDOTHERM PUR


PUR/V

20 10 x 1 0.71

30 7.5 x 1 1.07

40 6 x 1 1.43

50 5 x 1 1.79

*60 slab 1.2 x 1 2.14

*80 slab 1.2 x 1 3.03

*100 slab 1.2 x 1 3.85


CHARACTERISTICS TEST METHOD

Declared heat conductivity at temperature of 10 °C, W/(m K) λD UNI EN 13163 0.028

Volumic mass of the slab, kg/m3 ρ - 35

Compressive strength at 10% linear deformation, kPa CS (10\Y) UNI EN 826 ≥ 150

Vapour permeability coeffi cient μ UNI EN 12086 56÷19

Heat capacity, J/kg°C Cp - 1464

Dimensional stability in specifi c conditions of temperature and humidity, % DS(N) UNI EN 1604 1

Resistance to diffusion of water vapor, m2/hPa Z UNI EN 12086 8 ± 3

Long term water absorption by immersion, % WL(T) UNI EN 12087 ≤ 2.0

Reaction to fi re, Euroclasse – EN 13501-1 E




INSTALLATION

83

HEA

T IN

SULA

TIO

N

MA

TER

IALS



Heat insulation system supplied in panels consisting by expanded polyurethane covered on both sides with special coating coupled an elastoplastomeric bituminous membrane with glass fi bre or non-woven polyester reinforcement.The addition of graphite powders in the raw material increase the heat resistance of the product.

The general physical and chemical properties of the expanded polyurethane are: fi re-retardant; excellent thermal insulation; excellent mechanical resistance to compression; fungal, insect and bacteria attack resistant.

It can be fi xed using molten oxidised bitumen for a quantity of 1.5 kg/m2 or using mechanical fas-teners, generally a minimum of 5 fasteners per square metre should be used, or by torching the vapour barrier and sticking the insulation material to the molten compound if a gravel layer or similarballast will be used.

SCUDOTHERM PUR GT

THICKNESS,MM DIMENSIONS PANEL, mHEAT RESISTANCE RD (M2 K/W)

PUR GT

40 1 x 1.2 1.74

50 1 x 1.2 2.17

60 1 x 1.2 2.61

80 1 x 1.2 3.48

100 1 x 1.2 4.35

120 1 x 1.2 5.22

CHARACTERISTICS TEST METHOD PUR GT

Declared heat conductivity at temperature of 10 °C, W/(m K) λD UNI EN 13165 annex A and C 0.023

Compressive strength at 10% linear deformation, kPa CS (10\Y) EN 826 40 – 60 mm = 14080-120 mm = 130

Vapour permeability coeffi cient μ UNI EN 12086 148 ± 24

Dimensional stability in specifi c conditions of temperature and humidity, % DS(N) UNI EN 1604 1

Long term water absorption by immersion, % WL(T) UNI EN 12088 ≤ 0.3 (thickness 120 mm)

Reaction to fi re, Euroclasse – EN 13501-1 F

Heat capacity, J/kgK Cp EN 10456 1453




INSTALLATION

84



Shaped heat insulation panels made of expanded polystyrene. It is available in various densities and is laminated to an elastoplastomeric membrane. Two sides of the board have step joints, to ensure perfect, stable positioning. The system is fi xed mechanically to the roof deck by self-tapping screws having large diameter washer. The system is used for the refurbishment of galvanised steel roof decks, together with a cap sheet consisting of a mineral surfaced polymer bitumen membrane, fully bonded on the laminated membrane.

SCUDOTHERM ONDA consisting of a wave profi le expanded polystyrene board and is laminated to an elastoplastomeric membrane, having two selvedge. It is available in various densities. Two sides of the board have step joints, to ensure perfect, stable positioning.The system is fi xed mechanically to the roof deck by expansion bolts having large diameter washer. The system is used for the refurbishment of asbestos cement corrugated decks, together with a cap sheet consisting of a mineral surfaced polymer bitumen membrane, fully bonded on the laminated membrane.

SCUDOTHERM GRECA

SCUDOTHERM ONDA

TYPEHEAT CONDUCTIVITY

AT 10°C, W/(m K)COMPRESSION

RESISTANCE, KPaVAPOUR DIFF. RESISTANCE, μ

DIMENSIONAL STABILITY, %

EPS120 0.035 ≤ 120 30 ÷ 70 ±2

EPS100 0.035 ≤ 100 30 ÷ 70 ±2

EPS80 0.042 ≤ 80 20 ÷ 40 ±2

TYPEHEAT CONDUCTIVITY

AT 10°C, W/(m K)COMPRESSION

RESISTANCE, KPaVAPOUR DIFF. RESISTANCE, μ

DIMENSIONAL STABILITY, %

EPS120 0.035 ≤ 120 30 ÷ 70 ±2

EPS100 0.035 ≤ 100 30 ÷ 70 ±2

EPS80 0.042 ≤ 80 20 ÷ 40 ±2

THICKNESS , mm TYPENUMBER OF WAVES

PER SLABPITCH , mm WAVE HEIGHT, mm DIMENSIONS, mm

55 A1 7 146 48 1020 x 1000

55 A2 6 152 52 910 x 1000

55 A3 6 177 51 1060 x 1000

55 A4 5 177 51 880 x 1000







INSTALLATION

INSTALLATION

SELF-ADHESIVE SEALANT TAPE

SELF

-AD

HES

IVE

SEA

LAN

T TA

PES

Self-adhesive sealant tape

NICOBAND

86

NICOBAND sealant tape – a convenient way to seal various cracks and joints. Can also be used to insulate junctions, for roofi ng repairs and for roof repair systems. The special UV protection layer increases its service life outdoors and the assortment of colors makes it suitable for any roof.

ADVANTAGES:

Protected from UV radiation.The bitumen layer of NICOBAND sealant tape is protected from UV radiation by an aluminum coating. This makes it possible to use the tape outdoors.

Easy to use and durable.NICOBAND sealant tape is very easy to use and its application requires no spe-cial skills. Because of the specially formulated bitumen-polymer binder the sealing function of the tape extends for its full lifetime (10 years).

Different range of the colors.The tape is designed for the most popular roofi ng colors (including metallic). It allows you to perform repairs or maintenance in the tone of the main surface without disturbing its form.

Flawless adhesion to many different surfaces.The self-adhesive surface provides for perfect quality adhesion to many differ-ent surfaces: metal, slate, wood, plastic, plaster, concrete, glass, etc.

METHOD OF APPLICATION:

The surface must be fl at, dry and clean. Cut the tape to length, remove the protective fi lm, stick the tape to desired area and press it fi rmly. If the temperature is below +5°C it is necessary to fi rst keep NICOBAND in room temperature for at least 12 hours before ap-plication. The use of the material at sub-zero temperatures requires additional heating of the surface. The use of NICOBAND is not recommended on hot vertical surfaces or on surfaces with a temperature above +80°C.

NICOBAND

WIDTH, cm 5 7.5 10 15 20 30

LENGTH 3 m + + + + - -

LENGTH 10 m - + + + + +

TAPES DIMENSIONS, mm PACKAGE SIZE, mm QUANTITY IN PACKAGE WEIGHT OF PACKAGE, kg QUANTITY PER PALLET PALLET WEIGHT, kg

3000x50 box 240x240x320 24 5.9 480 148

3000x75 box 240x240x320 16 5.9 320 148

3000x100 box 240x240x320 12 5.9 720 384

3000x150 box 240х240х320 8 5.9 480 384

10000х75 box 180x180x320 4 5 120 180

10000х100 box 180x180x320 3 5 270 480

10000х150 box 180x180x320 2 5 180 480

10000х200 box 180x180x320 1 3.5 90 345

10000х300 box 180x180x320 1 5 90 480


NICOBAND

87

SELF

-AD

HES

IVE

SEA

LAN

T TA

PES

NICOBAND DUO - a double-sided self-adhesive bitumen-polymer tape for sealing and bonding surfaces. Perfect for waterproofi ng hidden joints in pro-fi led roofi ng membranes and coatings, attaching insulation and for sealing pipe joints. Irreplaceable for different types of repairs.

ADVANTAGES:

Accurate insulation in diffi cult places.The sealant is designed as a tape (a special layer of thick bitumen-polymer mixture between siliconized easily removable protective fi lms) which allows for quick and accurate waterproofi ng without tools and with little or no prior training. The NICOBAND DUO sealant tape is indispensable where there is a need to tightly bond two surfaces to each other. If performs two functions by simultaneously fi lling the gap between the two surfaces and securely bonding them. The tape makes it possible to insulate many diffi cult places. Its service life is 10 years.

Attaches fl awlessly to many different surfaces.NICOBAND DUO, double-sided self-adhesive tape sealant, adheres solidly to many different surfaces: metal, slate, wood, plastic, plaster, concrete, glass, etc. and allows for connecting and sealing elements with many different tex-tures and properties.

Convenient and reliable sealing.The tape is very easy to use and its application requires no special tools.NICOBAND DUO works both as a reliable hermetic layer and achieves abso-lutely waterproof joints.

NICOBAND DUO


The surfaces must be fl at, dry and clean. Cut the tape to length, remove the protective fi lm from either side of the tape and stick the tape to the surface. Remove the protective fi lm from the second side of the tape and fi rmly press the surface of the pasted item. If the temperature is below +5°C it is necessary to fi rst keep NICOBAND DUO in room temperature for at least 12 hours before applica-tion. The use of the material at low temperatures requires additional heating of the surface. Do not use on hot vertical surfaces or on surfaces with a temperature above +80°C.

WIDTH, cm 5 7.5 10 15 20 30

LENGTH 3 m + + + + - -

LENGTH 10 m - + + + + +


3000x50 box 240x240x320 24 5.9 480 148

3000x75 box 240x240x320 16 5.9 320 148

3000x100 box 240x240x320 12 5.9 720 384

3000x150 box 240х240х320 8 5.9 480 384

10000х75 box 180x180x320 4 5 120 180

10000х100 box 180x180x320 3 5 270 480

10000х150 box 180x180x320 2 5 180 480

10000х200 box 180x180x320 1 3.5 90 345

10000х300 box 180x180x320 1 5 90 480


NICOBAND

88

NICOBAND INSIDE is a self-adhesive sealing and waterproofi ng bitumen polymer tape. Produced by unilateral application of anti-adhesion to the poly-mer fi lm self-adhesive bitumen-polymer binder consisting of bitumen, SIS (styrene-isoprene-styrene) polymer modifi ers and special adhesive additives. As a protective layer on the other side of self-adhesive non-woven polypropyl-ene used (Spunbond).

The material is intended for indoor use. Suitable for: Sealing joints in the ventilation system (ducts, fl oors exible ducts). Sealing of various pipes in cold areas. The product adjacencies to the walls and other protruding parts for sealing the interior fl oors of the roll and mastic materials.

The unit is waterproof fl oors in the rooms (bathrooms, kitchen) without the use of protective cement sand screed. Directly on the material can be glued ceramic tile.

Also used where the material will be closed from the effects of UV-rays: The unit capillary cutoff for masonry and wood construction. Vapor barrier and waterproofi ng assembly seams at the organization of heat insulation.

NICOBAND INSIDE

WIDTH, cm 5 7.5 10 15 20 30

LENGTH 3 m + + + + - -

LENGTH 10 m - + + + + +


3000x50 box 240x240x320 24 5.9 480 148

3000x75 box 240x240x320 16 5.9 320 148

3000x100 box 240x240x320 12 5.9 720 384

3000x150 box 240х240х320 8 5.9 480 384

10000х75 box 180x180x320 4 5 120 180

10000х100 box 180x180x320 3 5 270 480

10000х150 box 180x180x320 2 5 180 480

10000х200 box 180x180x320 1 3.5 90 345

10000х300 box 180x180x320 1 5 90 480


The surface must be fl at, dry and clean. Cut the tape to length, remove the protective fi lm, stick the tape to desired area and press it fi rmly. If the temperature is below +5°C it is necessary to fi rst keep NICOBAND INSIDE in room temperature for at least 12 hours before application. The use of the material at sub-zero temperatures requires additional heating of the surface. The use of NICOBAND INSIDE is not recommended on hot vertical surfaces or on surfaces with a temperature above +80°C.

LIQUID PRODUCTS

LIQ

UID

PR

OD

UC

TS

90

Waterproofi ng materials

LIQUID PRODUCTS

BITUMEN PRIMERS

ATTACHING MASTICS

VERPRIM ADHESIVE

Bitumen primer with elastomeric pure solvents suitable for the preparation of concrete surfaces, old bituminous and wood surfaces.

VERPRIM PROFESSIONAL

Primer based on bitumen and pure solvents. Fast drying.

VERPRIM

Bitumen, fast drying solvent based primer, used to prepare (prime coating) the surface improving the adhesion of polymer bitumen membranes on surfaces of concrete, cement and steel.

ECOVERPRIM

Water based bitumen primer.

ADELCOLD

Mastic adhesive solvent based for cold application of bituminous membranes.

ADECOLD STRIP

Mastic adhesive solvent based for overlaps in the cold application of bituminous membranes.

ADEMASTIC

The mastic is designed for adhesion of extruded polystyrene slabs to bitumen and polymer-bitumen in-sulation materials, as well as to concrete, metal and wooden surfaces in foundation insulation systems. It is not suitable for adhesion of heat insulation panels made of fi brosis or polyurethane, coated with paper kraft and / or the same.

ADEMASTIC ECO

Bitumen mastic water-based for cold adhesion of heat insulating slabs of polyurethane or extruded polystyrene.

PRODUCT PACKAGE WEIGHT, kg

ADEMASTIC Bucket 25

ADEMASTIC ECO Bucket 20


ADELCOLD Bucket 20

ADECOLD STRIP Bucket / Cartridge 5–20 / 0.4

PRODUCT PACKAGE LITRES

VERPRIM ADHESIVE Bucket 20

VERPRIM PROFESSIONAL Bucket 20

VERPRIM Bucket 5–10–20

ECOVERPRIM Bucket 20

91


LIQUID PRODUCTS

LIQ

UID

PR

OD

UC

TS

PROTECTIVE COATINGS

SCUDOCOAT WHITE PLUS

White paint based on modifi ed bitumen in aqueous emulsion and special additives of glass micro-spheres with a high coeffi cient of refl ection. The characteristics of high solar refl ectance and emissivity of the product allow to obtain a high «passive cooling» of the building.Area of application:

Protection and coloration of bitumen membranes aged (at least three months). Protection and coloration of ceramic tiles, masonry and rough plastered surfaces. Protection and coloration of prefabricated exterior concrete surfaces.

SCUDOMETAL

Protective coating based on modifi ed bitumen. It is used for the protection of gutters, pipes etc.

SCUDOCOLOR

Waterproofi ng paint in a water based emulsion for the protection and coloring of roofs, walls, aged bitumen layers.Area of application:

Support preparation of the surfaces (concrete, cement, wood). Coloration and protection of bituminous membrane with mineral protection. Note: do not apply on membranes before six months from the installation on the roof.

Wall and concrete coloration and protection. Wood coloration.

SCUDOALL

Refl ective aluminum mastic for protection of roofs against UV-radiation and heat aging. Area of application:

Installation of protective layer on new bitumen, polymer-bitumen mastic roofs; Recovery of protective layer on old bitumen, polymer-bitumen mastic and roll roofs; Corrosion protection of roof coverings, gutters, pipes, etc.


SCUDOCOAT WHITE PLUS Bucket 14


SCUDOMETAL Bucket 20


SCUDOMETAL Bucket 5–10–20


SCUDOALL Bucket 20

92


LIQUID PRODUCTS

BITUMEN EMULSION

BASEBIT

Water-based bitumen emulsion used for waterproofi ng of of cementitious structures and vertical parts of the foundations.


BASEBIT Bucket 5–10–20


SCUDOFLEX Bucket 5–10–20


VERFIX Bucket 18


ELASTOCOVER Bucket 10–20

LIQUID MEMBRANE

FOR ASBESTOS-CEMENT COVERING

SCUDOFLEX

Elastomeric waterproofi ng liquid membrane coloured with modifi ed acrylic co-polymers in water emulsion. SCUDOFLEX reduces carbonation phenomena on concrete surfaces. Once dried, the prod-uct forms a strong and elastic fi lm with an excellent adhesion to the surface. SCUDOFLEX is used for the waterproofi ng of concrete-structured roofs, terraces with concrete fl oors, bituminous surfaces or bitumen-polymer-membranes. For the waterproofi ng of concrete balconies, it is applied before the gluing of paving tiles made of stoneware or clinker, where polymer-bitumen membranes shall not be used. The product may also be used on fi brocement, wood and metal surfaces.

VERFIX

Adhesive prime containing for the for asbestos-cement membranes. It perfoms the mixture of modi-fi ed resins with a water-based emulsion.

ELASTOCOVER

Waterproof encapsulating coating, based on elastomeric resins in a water-based emulsion. Suitable as a coating when encapsulating asbestos-cement components. Can be stretched by over 500% and is still fl exible at –20 °C. Highly resistant to UV rays, acid rain and industrial atmospheric pollution.

ACCESSORIESAND EQUIPMENT

AC

CES

SOR

IES

A

ND

EQ

UIP

MEN

T

Roofi ng materials


94

The jet is used for modernization of welding equipment Varimat so that it can be used for hot-air welding of bitumen materials seams. The jet nozzle is designed for warmed air supply to the place of bitumen materials connection. Using of the nozzle and wide steel roller allows making a seam in overlapping of roll-fed bitumen materials not less than 90 mm width with binding agent fl owing out of the seam. This method of welding increases the speed of roof covering arrangement signifi cantly (by 1.5 times) in comparison with traditional methods of padding with the use of standard propane burners.

Gas or liquid fuel torches are used for welding of bitumen and polymer-bitumen materials, prep-aration of bases (drying, warming up of fl oors and roofs) during installation of waterproofi ng materials and other construction work that are technologically connected to the use of an open fl ame with heating of the surface to a temperature of up to +400°С. The range includes a simpli-fi ed versions of torches and professional equipment to perform specialized works.

ROOFING TORCHES AND EQUIPMENT

Roofi ng materials


95

AC

CES

SOR

IES

A

ND

EQ

UIP

MEN

T

Roof water drains are designed for the removal of rain water from fl at roofs. Wide range of plastic water drains for various roofs (simple fl at, inversion, multipurpose, “green” roofs, etc.) are produced. The complete set of plastic water drains can include a thermo-cable for the prevention of icing during the low-season. Water drains are corrosion-proof, temperature-resistant.

Aerators (caps) with various diameters are used when installing “breathing” roofs and roof sanitation. They are designed for steam removal. It prevents the formation of swellings on the roof cladding. Aerators increase the service life of the roof cladding. Plastic aerators are corrosion-proof and can be used in various climatic zones. On simple fl at roofs, aerators are mounted across the entire area at regular intervals.

The rubber seals for the roof is designed to cre-ate a tightness of pipes, antenna extensions and the small pipes serving various purposes that pass through the roof cladding. It is produced from weatherproof rubber, and it combines perfectly with polymer-bitumen materials.

ROOF DRAINS

SEALS

AERATORS

Roofi ng materials


96

The combined package offered by TechnoNICOL Corporation includes a full line of necessary welding equipment: Leister Varimat automatic welding equipment, Leister Triac Drive semi-automatic welding equipment, Leister Triac manual welding units, and a set of nozzles.

Prefabricated from plastifi ed PVC. Welded by hot air. Completely compatible with synthetyc membranes. The materials increase the reliability of the roofi ng system installation and save the installer’s time.

WELDING EQUIPMENT FOR PVC AND TPO

PRE-FABRICATED ELEMENTS

Roofi ng materials


97

AC

CES

SOR

IES

A

ND

EQ

UIP

MEN

T

Roofi ng funnel with a leaves separator and a crimping fl ange made of stainless steel. Used in all types of waterproofi ng materials. The electrical heat maintains drainage system reliability during the winter, in autumn and in spring. Produced from high-strength, weatherproof, UV-resistant (from-50 to +80°С) material.Weatherings and weirs are used for constant or reserve water drainage through a parapet, are produced from PVC and welded on a waterproofi ng cladding.

Control-injection tubes (connection branches) are welded on LOGICROOF T-SL membrane and serve as the leak indicator. In case of a leak, through the connecting branch the special injection solution is pumped in order to waterproof the zone bounded by the waterstop.

A special fi xing element, PVC rondel is designed for fastening LOGICROOF T-SL tunnel water-proofi ng membrane to a vertical wall.

The PVC-rondels are fastened mechanically through a lining layer to the base, and the mem-brane is welded through the underside to a rondel by hot air.

INJECTION CONNECTING BRANCHES

PVC RONDEL

DRAINAGE SYSTEMS

Roofi ng materials


98

TECHNONICOL cleaner for PVC-membranes effectively removes organic residue (fats, bitumen, oil traces) and inorganic pollutants resulting from the installation and use of a polymer roofi ng.

The cleaner is designed to remove local impurities from the surface of the PVC-membranes. It is used for additional preparation of PVC-membrane surfaces for welding by hot air or a hot wedge.Enhances the physical and mechanical properties of the welded seam.

Use for cleaning tools. The cleaner needs to be used before the additional sealing of seams with liquid PVC and when welding a new roof to the existing one.The surface coverage is 0.55 l per 1 m2 of dirty material.

TECHNONICOL adhesive is used for adhesion of PVC or TPO membranes without fl eece un-derlayers to vertical surfaces of various roofi ng structures (to parapet walls, pipes, duct shafts, etc.) made of metal, wood, concrete, stone, and other materials.

TECHNONICOL contact adhesive is not used for continuous adhesion of PVC-membranes to horizontal surfaces of the base!

Used for additional dampproofi ng and sealing of welded seams for PVC-membranes. The Liquid PVC TechnoNICOL is a solution of plastifi ed polyvinylchloride (PVC). After polymerization, a fi lm is formed, with properties identical to those of the LOGICROOF membrane. TechnoNICOL liquid PVC increases the water resistance of the welded joint and reduces the risk of moisture capillary suction by the reinforced membrane grid. Light-gray in color.

CLEANER FOR MEMBRANES

ADHESIVE FOR MEMBRANES

LIQUID PVC

Roofi ng materials


99

AC

CES

SOR

IES

A

ND

EQ

UIP

MEN

T

Needled and hot-calendered nonwoven polyester geotextile.Is is used as a protection and separation layer in built-up waterproofi ng systems, and for con-tainment and drainage in road construction, railways, earthworks, foundations and support structures, drainage systems, erosion control, reservoirs and dikes, canals, tunnels, landfi lls and liquid waste containment projects.Ideal for installation with mechanical retention. Laid dry, overlapping sheets by 10 to 15 cm. Product must be covered within one day after installation.

EN 13249:2000 + A1:2005 Required characteristics for use in the construc-tion of roads and other traffi cked areas.

EN 13250:2000 + A1:2005 Required characteristics for use in the con-struction of railways.

EN 13251:2000 + A1:2005 Required characteristics for use in earthworks, foundations and retaining structures.

EN 13252:2000 + A1:2005 Required characteristics for use in drainage systems.

EN 13253:2000 + A1:2005 Required characteristics for use in earthworks, foundations and retaining structures.

EN 13254:2000 + A1:2005 Required characteristics for use in the con-struction of reservoirs and dams.

EN 13255:2000 + A1:2005 Required characteristics for use in ero-sion control works.

EN 13256:2000 + A1:2005 Required char-acteristics for use in the construction of tun-nels and underground structures.

EN 13257:2000 + A1:2005 Required characteristics for use in solid waste disposals.

EN 13265:2000 + A1:2005 Required characteristics for use in liquid waste containment projects.

The multilayered sheet is formed by combining a polymer membrane, 0.8 mm thick, and a thin galvanized steel sheet, 0.6 mm thick. The sheet is used for fastening of membranes in places of roof seams, intermediatefastening of the membrane on walls and parapets, for manufacturing of protective skirting, compensators of movement joints, elements of external drains and larmier fi nish. The polymeric covering on the top surface of the metal allows for welding a plastic membrane on metal profi le, providing for a tight connection. The laminated PVC-metal is used for weld-ing with PVC-membranes.

SEPARATION LAYER

LAMINATED METAL SHEET

PRODUCT THICKNESS, mmMASS PER UNIT

AREA, g/m2

TENSILE STRENGTH L/T, kN/m

ELONGATION L/T, %RESISTANCE TO STATIC

LOADING, N

LAERTEX 300 2.40300 22/22

60/803700

GEOFIX 300 1.45 50/60

Roofi ng materials


100

Metallic anchor is a metallic anchor element, the structural basis of which is a specially rolled gal-vanized steel sheet that forms a spring in the cross section. The anchor can sustain a load due to frictional forces generated as a result of straightening the springs in the base material and partial surface pressure along the anchor rod.

Metallic roundel is a galvanized metal washer that is placed on a metal roundel to increase the area of the cap anchor, thereby more evenly distributing the mechanical load on the fi re-resistant slab.

Fasteners are produced from low-pressure polyethylene. The fastener is a stud with teeth for fi xing in the material and a fl at platform with an adhesive layer which is protected by an easily removable fi lm.

Fasteners are used for temporally fi xation of slabs made of extruded polystyrene or for dimpled membranes to various surfaces, including to bitumen or polymer-bitumen waterproofi ng in foundation insulation systems.

FASTENERS

METALLIC ANCHOR AND ROUNDEL

FASTENERS WITH ADHESIVE LAYER

Telescopic hardware TechnoNICOL consists of plastic elements and a specialized anker. The hard-ware is used for fastening heat insulation and a roofi ng membrane to the bearing foundation from zinc-coated shaped sheet, wood or to a monolithic concrete slab, etc. When fastening to a shaped sheet, the use of a self-tapping screw with a drill is necessary; when installing in concrete, a drive anchor should be used.

TechnoNICOL boundary rod is used for fastening the roof cladding edge on a vertical surface. Not used on curved surfaces. Fixed to the base using a self-tapping screw. The top fl ap is fi lled with edge sealant for full tightness and the prevention of water from getting under the membrane.

TechnoNICOL clamping rod is used for fi xing the membrane along the perimeter of the roof and around all protruding structures. Installed on vertical surfaces at the very bottom of the juncture of vertical and horizontal surfaces. Also used instead of an edge rod on curved surfaces for fi xing the edge of the membrane.

Roofi ng materials


101

AC

CES

SOR

IES

A

ND

EQ

UIP

MEN

T

Wire nails with circular cross-section. It is used to remove excess sub-roof moisture. The hip&ridge shingles matching the basic color of the roof are installed on the ridge vent. This gives a fi nished aesthetic appearance and makes the ridge vent unnoticeable on the roof. Rate of fl ow: 1 vent covers ~ 20–25 m2

Dimensions: 0.61х0.29 m

It is used to remove excess subroof moisture on roofs that are not ridged. It is fi xed to the roof by a pass component under the shingles at the moment of their installation.

Rate of fl ow: 1 ventilation unit covers ~5–10 m2.Dimensions: D of the outlet is 110 mm.

It serves as the basis for the installation of ventilation or sewage outlets. It is fi xed to the roof under the shingles at the moment of their installation.

Dimensions: passage opening is 25*16 cm, the base measures 57*48 cm

It is used to ventilate the sewer system and to remove all odors and vapors generated by food preparation. We recommend that you use it on the roofs of summer houses.

Dimensions: D of the outlet is 110 mm H of the pipe is 500 mm

It is used to ventilate the sewer system and to remove all odors and vapors gener-ated by food preparation. We recommend that you install it on the roofs of structures with year-round occupancy. It is not subject to icing even during prolonged frost.

Dimensions: D of the pipe is 125 mm D of the pipe (external) is 160 mm H of the pipe is 500 mm

It is used to remove excess subroof moisture on roofs that are not ridged. It is fi xed to the roof under the shingles at the moment of their installation.

Rate of fl ow: 1 ventilation unit covers ~ 5–10 m2.

Dimensions: D of the outlet is 110 mm

KTV VENTILATION COMPONENT

VENTILATION OUTLET

CONTINUOUS RIDGE VENT

Roofi ng materials


102

Application areas: Gluing of seams of fl exible shingles and other bitumen-based materials; Adhesion of bitumen-based materials to brick, concrete, metal, wood, ceramic and other surfaces.

Operating temperature range from -5°C to +40°C.

Wire nails with circular cross-section. It is used for fi xation of bitumen shingles to a wooden base. Also used for mechanical fi xation of roofi ng components.

Aesthetic design of hips, facilitating installation of eaves, protection against the maximum wind, snow and rain loads. The adhesive layer is deposited on the entire inner surface of each shingle provides 100% sealing of these elements.

Used in a cottage and low-rise buildings, as in the reconstruction and construction of new build-ings for various purposes, as a waterproofi ng internal fractures of the roof (valleys), the most exposed to snow and rain loads. Also valley gutter waterproofi ng is used for sealing of adjacency to the vertical walls and pipes.

MASTIC nr. 23 (FIXER)

ROOFING NAILS

HIP TILES

VALLEY GUTTER WATERPROOFING

SMOOTH GALVANIZED NAILS

DIAMETER PACK

20 mm 5 kg

25 mm 5 kg

TWISTED GALVANIZED NAILS

DIAMETER PACK

25 mm 5 kg

30 mm 5 kg

NAILS HDG

DIAMETER PACK

16 mm 1x12000

19 mm 1x10000

25 mm 1x9000

32 mm 1x7000

PRODUCT PACKAGE LITRES

MASTIC FIXER Metal bucket / Cartridge 10, 3 / 0.31

TechnoNICOL ITALIA srl

Via Galoppat, 134 - 33087, Pasiano, ItalyTel.: +39 0434 614 611, Fax: +39 0434 628 178e-mail: [email protected], www.tn-europe.com

general catalog - technonicoltechnonicol.it/images/cms/headers/example/catalog_en_web.pdf ·...

Documents