general information - ortho-medical -tibia-f… · cannulated tibia nails cat. no. dia. mm length...

2

GENERAL INFORMATION CAUTIONS BEFORE USING THE PRODUCT

Before every use you should carefully check the operability of the implants and operating instruments. They should be free of damages. If Ether are any cracks, fractures, discolouration, deformation or any damages on the implants, which my be due to unsuitable storing, imperfect sterilization or preliminary inefficient treatment, the use of the implant is prohibited. The assembly, perfect fitting and operation of the implants and all necessary instruments should be tested. Perfect fitting and operation, appropriate dimensions and positions should be checked in all cases.

REQUIREMENTS TOWARD THE USER

The instrument set of tools and implants can only be applied by doctors with appropriate qualifications and special information and experience in field of using osteosynthesis implants. The doctor who performs the operation is responsible for choosing the correct indication, the type and dimension of the implants and the operation treatment technology.

CONTRAINDICATIONS

Implantation is not recommended if the patient’s health conditions makes difficult to accept it or problems are expected during recovery process e.g. decreased circulation, weak quality or quantity bone system, impossible rehabilitation due the mental condition of the patient etc.

GENERAL WARNINGS

Before the operation the patient should be informed about the possible disadvantages of the implant. By choosing the appropriate implant type of the bone fracture, the weight and activity of the patient should be taken into consideration. The solidity of the implant is restricted, so it is necessary to avoid overloading it by overweight. The biomechanical loading of the implant should be minimized, as much as possible. During the application of the implant the process of recovering is to be controlled. By repetitive loading or by protected bone recovering the implants my be deformed, dislocated. This needs intervention in time. Repeated deformation of the implant should be avoided. The implants are only for one‐time use ( not reusable ), the implants are declared = single used product, after re‐implantation of a declared single used product, the re‐implanted product is prohibited for next further implantation. The type and the size of the implants should be defined according to the specific case. Before operation the user’s manual of of the implants should be studied carefully!

GENERAL WARNINGS

The applied high quality materials specially developed for TITANIUM IMPLANTS are made in according to TITANIUM ALLOY ISO 5832‐3 Ti6A14V. Combined use of implant products from other manufacturer companies my start damaging process and is prohibited.

PROTECTION OF THE PRODUCT, PACKAGING; PREPERATION FOR USE

The declared non‐sterile implants come clean, without any production pollution for packaging. Before use circumstances are to be assured where the integrity of the packaging will be preserved. The storage should be in a clean, dry place – environment avoiding extra temperature and chemicals.

STERILIZATION

Before use unpack the implants and sterilize due the prescriptions, also follow strictly the manual – instruction for use IFU avoid the touch by bare hand. The sterilization of the instruments should be done together with the tray, the trays should each draped and sterilized inside of a required and recommended closed sterilization container, bottom and lid perforated.

INTERACTION WITH MEDICINES

An interaction of the implants with medicines is not known

3

GENERAL INFORMATION FOR INDICATIONS AND ADVANTAGES

TITANIUM UNREAMED TIBIA NAILS

4

TITANIUM UNREAMED SOLID ( NON-CANNULATED ) TIBIA NAILS AVAILABLE IN DIA. 8.0MM UP TO DIA. 9.0MM

TITANIUM UNREAMED CANNULATED TIBIA NAILS AVAILABLE IN DIA. 9.0MM UP TO DIA. 11.0MM

PRODUCT DESCRIPTION: DIA. 9.0 MM UNREAMED CANNULATED TIBIA NAILS

CAT. NO. DIA. MM LENGTH MM 95‐951.250TI Ø9.0mm 255mm 95‐951.270TI Ø9.0mm 270mm 95‐951.280TI Ø9.0mm 285mm 95‐951.300TI Ø9.0mm 300mm 95‐951.310TI Ø9.0mm 315mm 95‐951.330TI Ø9.0mm 330mm 95‐951.340TI Ø9.0mm 345mm 95‐951.360TI Ø9.0mm 360mm 95‐951.380TI Ø9.0mm 380mm 95‐951.400TI Ø9.0mm 400mm 95‐951.420TI Ø9.0mm 420mm

PRODUCT DESCRIPTION: DIA. 8.0 MM UNREAMED SOLID ( NON‐CANNULATED ) TIBIA NAILS

CAT. NO. DIA. MM LENGTH MM 95‐950.25TI Ø8.0mm 255mm 95‐950.27TI Ø8.0mm 270mm 95‐950.28TI Ø8.0mm 285mm 95‐950.30TI Ø8.0mm 300mm 95‐950.31TI Ø8.0mm 315mm 95‐950.33TI Ø8.0mm 330mm 95‐950.34TI Ø8.0mm 345mm 95‐950.36TI Ø8.0mm 360mm 95‐950.38TI Ø8.0mm 380mm

PRODUCT DESCRIPTION: DIA.9.0 MM UNREAMED SOLID ( NON‐CANNULATED ) TIBIA NAILS


5

TITANIUM UNREAMED CANNULATED TIBIA NAILS AVAILABLE IN DIA. 9.0MM UP TO DIA. 11.0MM

CAT.NO.: PRODUCT DESCRIPTION: 95-905.02TI Titanium -Screw Plug 5/16" used for Titanium Tibia Nails

PRODUCT DESCRIPTION: DIA.10.0 MM UNREAMED CANNULATED TIBIA NAILS


PRODUCT DESCRIPTION: DIA. 11.0 MM UNREAMED CANNULATED TIBIA NAILS

CAT. NO. DIA. MM LENGTH MM 95‐953.25TI Ø11.0mm 255mm 95‐953.27TI Ø11.0mm 270mm 95‐953.28TI Ø11.0mm 285mm 95‐953.30TI Ø11.0mm 300mm 95‐953.31TI Ø11.0mm 315mm 95‐953.33TI Ø11.0mm 330mm 95‐953.34TI Ø11.0mm 345mm 95‐953.36TI Ø11.0mm 360mm 95‐953.38TI Ø11.0mm 380mm 95‐953.40TI Ø11.0mm 400mm 95‐953.42TI Ø11.0mm 420mm 95‐953.44TI Ø11.0mm 440mm

6

GENERAL INFORMATION FOR INDICATIONS AND ADVANTAGES

TITANIUM UNREAMED FEMORAL NAILS

7

TITANIUM UNREAMED SOLID ( NON-CANNULATED ) FEMORAL NAILS AVAILABLE IN DIA. 8.0MM UP TO DIA. 9.0MM

TITANIUM UNREAMED CANNULATED FEMORAL NAILS AVAILABLE IN DIA. 9.0MM UP TO DIA. 11.0MM

PRODUCT DESCRIPTION: DIA. 8.0 MM UNREAMED SOLID ( NON‐CANNULATED ) FEMORAL NAILS

CAT. NO. DIA. MM LENGTH MM 95‐940.28TI Ø8.0mm 280mm 95‐940.30TI Ø8.0mm 300mm 95‐940.32TI Ø8.0mm 320mm 95‐940.34TI Ø8.0mm 340mm 95‐940.36TI Ø8.0mm 360mm 95‐940.38TI Ø8.0mm 380mm

PRODUCT DESCRIPTION: DIA. 8.0 MM UNREAMED SOLID ( NON‐CANNULATED ) FEMORAL NAILS

CAT. NO. DIA. MM LENGTH MM 95‐941.30TI Ø9.0mm 300mm 95‐941.32TI Ø9.0mm 320mm 95‐941.34TI Ø9.0mm 340mm 95‐941.36TI Ø9.0mm 360mm 95‐941.38TI Ø9.0mm 380mm 95‐941.40TI Ø9.0mm 400mm 95‐941.42TI Ø9.0mm 420mm 95‐941.44TI Ø9.0mm 440mm

PRODUCT DESCRIPTION: DIA. 9.0 MM UNREAMED CANNULATED FEMORAL NAILS

CAT. NO. DIA. MM LENGTH MM 95‐941.300TI Ø9.0mm 300mm 95‐941.320TI Ø9.0mm 320mm 95‐941.340TI Ø9.0mm 340mm 95‐941.360TI Ø9.0mm 360mm 95‐941.380TI Ø9.0mm 380mm 95‐941.400TI Ø9.0mm 400mm 95‐941.420TI Ø9.0mm 420mm 95‐941.440TI Ø9.0mm 440mm

8

TITANIUM UNREAMED CANNULATED FEMORAL NAILS AVAILABLE IN DIA. 9.0MM UP TO DIA. 11.0MM


CAT. NO. DIA. MM LENGTH MM 95‐942.30TI Ø10.0mm 300mm 95‐942.32TI Ø10.0mm 320mm 95‐942.34TI Ø10.0mm 340mm 95‐942.36TI Ø10.0mm 360mm 95‐942.38TI Ø10.0mm 380mm 95‐942.40TI Ø10.0mm 400mm 95‐942.42TI Ø10.0mm 420mm 95‐942.44TI Ø10.0mm 440mm 95‐942.46TI Ø10.0mm 460mm 95‐942.48TI Ø10.0mm 480mm





9

CAT.NO.: PRODUCT DESCRIPTION: 95-905.01TI Titanium -Screw Plug 3/8" used for Titanium Femoral Nails

TITANIUM LOCKING SCREWS

TITANIUM LOCKING SCREWS DIA. 4.5 MM

TECHNICAL DIMENSION

Head Diameter = Ø8.0mm Hexagonal Socket width = 3.5mm Thread Diameter = Ø4.5mm Pitch = 1.25 mm Core Diameter = Ø3.5mm

TITANIUM LOCKING SCREWS DIA. 5.0 MM TECHNICAL DIMENSION

Head Diameter = Ø8.0mm Hexagonal Socket width = 3.5mm Thread Diameter = Ø5.0mm Pitch = 1.25 mm Core Diameter = Ø4.0mm

PRODUCT DESCRIPTION:

TITANIUM LOCKING SCREWS DIA. 4.5MM

PRODUCT DESCRIPTION:

TITANIUM LOCKING SCREWS DIA. 5.0MM

CAT.NO. DIA. LENGTH MM CAT.NO. DIA. LENGTH MM 95‐910.25TI Ø4.5mm 25mm 95‐911.25TI Ø5.0mm 25mm 95‐910.30TI Ø4.5mm 30mm 95‐911.30TI Ø5.0mm 30mm 95‐910.35TI Ø4.5mm 35mm 95‐911.35TI Ø5.0mm 35mm 95‐910.40TI Ø4.5mm 40mm 95‐911.40TI Ø5.0mm 40mm 95‐910.45TI Ø4.5mm 45mm 95‐911.45TI Ø5.0mm 45mm 95‐910.50TI Ø4.5mm 50mm 95‐911.50TI Ø5.0mm 50mm 95‐910.55TI Ø4.5mm 55mm 95‐911.55TI Ø5.0mm 55mm 95‐910.60TI Ø4.5mm 60mm 95‐911.60TI Ø5.0mm 60mm 95‐910.65TI Ø4.5mm 65mm 95‐911.65TI Ø5.0mm 65mm 95‐910.70TI Ø4.5mm 70mm 95‐911.70TI Ø5.0mm 70mm 95‐910.75TI Ø4.5mm 75mm 95‐911.75TI Ø5.0mm 75mm 95‐910.80TI Ø4.5mm 80mm 95‐911.80TI Ø5.0mm 80mm 95‐910.85TI Ø4.5mm 85mm 95‐911.85TI Ø5.0mm 85mm 95‐910.90TI Ø4.5mm 90mm 95‐911.90TI Ø5.0mm 90mm 95‐910.95TI Ø4.5mm 95mm 95‐911.95TI Ø5.0mm 95mm 95‐910.100TI Ø4.5mm 100mm 95‐911.100TI Ø5.0mm 100mm

10

TITANIUM LOCKING SCREW AND PLUG SET

CONTENT: PAGE 10 UP TO 11

CAT.NO. 95-960.10 TRAY FOR TITANIUM SCREW – AND PLUG SET

CONTENT: CAT.NO. 95‐960.00 TITANIUM LOCKING SCREW ‐AND PLUG SET CAT.NO.: PRODUCT DESCRIPTION: PCS.: 95‐960.10 Tray for Titanium Screw ‐and Plug Set ‐1‐ 95‐193.00 Screw Forceps ‐1‐ CAT.NO.: TITANIUM LOCKING SCREWS DIA. 4.5MM PCS.: 95‐910.25TI Ø4.5mm x Length 25mm ‐4‐ 95‐910.30TI Ø4.5mm x Length 30mm ‐4‐ 95‐910.35TI Ø4.5mm x Length 35mm ‐4‐ 95‐910.40TI Ø4.5mm x Length 40mm ‐4‐ 95‐910.45TI Ø4.5mm x Length 45mm ‐4‐ 95‐910.50TI Ø4.5mm x Length 50mm ‐4‐ 95‐910.55TI Ø4.5mm x Length 55mm ‐4‐ 95‐910.60TI Ø4.5mm x Length 60mm ‐4‐ 95‐910.65TI Ø4.5mm x Length 65mm ‐4‐ 95‐910.70TI Ø4.5mm x Length 70mm ‐4‐ 95‐910.75TI Ø4.5mm x Length 75mm ‐4‐ 95‐910.80TI Ø4.5mm x Length 80mm ‐4‐ 95‐910.85TI Ø4.5mm x Length 85mm ‐4‐ 95‐910.90TI Ø4.5mm x Length 90mm ‐4‐ 95‐910.95TI Ø4.5mm x Length 95mm ‐4‐ 95‐910.100TI Ø4.5mm x Length 100mm ‐4‐

11

TITANIUM LOCKING SCREW AND PLUG SET

CONTENT: PAGE 10 UP TO 11

CONTENT: CAT.NO. 95‐960.00 TITANIUM LOCKING SCREW ‐AND PLUG SET CAT.NO.: PRODUCT DESCRIPTION: PCS.: TITANIUM LOCKING SCREWS DIA. 5.0MM 95‐911.25TI Ø5.0mm x Length 25mm ‐4‐ 95‐911.30TI Ø5.0mm x Length 30mm ‐4‐ 95‐911.35TI Ø5.0mm x Length 35mm ‐4‐ 95‐911.40TI Ø5.0mm x Length 40mm ‐4‐ 95‐911.45TI Ø5.0mm x Length 45mm ‐4‐ 95‐911.50TI Ø5.0mm x Length 50mm ‐4‐ 95‐911.55TI Ø5.0mm x Length 55mm ‐4‐ 95‐911.60TI Ø5.0mm x Length 60mm ‐4‐ 95‐911.65TI Ø5.0mm x Length 65mm ‐4‐ 95‐911.70TI Ø5.0mm x Length 70mm ‐4‐ 95‐911.75TI Ø5.0mm x Length 75mm ‐4‐ 95‐911.80TI Ø5.0mm x Length 80mm ‐4‐ 95‐911.85TI Ø5.0mm x Length 85mm ‐4‐ 95‐911.90TI Ø5.0mm x Length 90mm ‐4‐ 95‐911.95TI Ø5.0mm x Length 95mm ‐4‐ 95‐911.100TI Ø5.0mm x Length 100mm ‐4‐ CAT.NO.: PRODUCT DESCRIPTION: PCS.: 95‐905‐01TI Titanium -Screw Plug 3/8" used for Titanium Femoral Nails ‐4‐ 95‐905.02TI Titanium -Screw Plug 5/16" used for Titanium Tibia Nails ‐4‐

RECOMMENDED STERILIZATION CONTAINER FOR LOCKING SCREW AND PLUG SET 95-960.00

CAT.NO.: PRODUCT DESCRIPTION: 60-560.13 Container 310 x 190 x 130 mm, Lid and Bottom perforated

12

BASIC INSTRUMENT SET FOR TITANIUM TIBIA AND FEMORAL NAIL SYSTEMNSTRUMENT SET OR TITANIUM CONTENT: PAGE 12 UP TO 13

CAT.NO. 95-965.50 TRAY FOR PROXIMAL DEVICES BASIC INSTRUMENT SET 95‐965.00, TITANIUM TIBIAL AND FEMORAL NAIL SYSTEM

CAT.NO. 95-970.10 TRAY SET ( 3 PIECES ) FOR *BASIC INSTRUMENT SET 95‐965.00*, TITANIUM TIBIAL AND FEMORAL NAIL SYSTEM

= NOT INCLUDED IN THE SET AND NOT APPLICABLE FOR TITANIUM NAILING SYSTEM!

13

BASIC INSTRUMENT SET FOR TITANIUM TIBIA AND FEMORAL NAIL SYSTEMNSTRUMENT SET OR TITANIUM CONTENT: PAGE 12 UP TO 13

CONTENT: CAT.NO. 95‐965.00 BASIC INSTRUMENT SET FOR TITANIUM TIBIA AND FEMORAL NAIL SYSTEM CAT.NO.: PRODUCT DESCRIPTION: PCS.: 95‐965.50 Tray for Proximal Devices, Titanium Tibial and Femoral Nail System ‐1‐ 95‐965.60 Proximal Device for Titanium Femoral Nails ‐1‐ 95‐809.00 Femoral Adapter Bolt ‐1‐ 95‐965.70 Proximal Device for Titanium Tibia Nails ‐1‐ CAT.NO.: PRODUCT DESCRIPTION: PCS.: 95‐970.10 Tray Set ( 3 Pieces ) used for *Basic Instrumenet SET 95‐965.00* ‐1‐ 95‐648.00 Universal Socket Wrench, width 17mm ‐1‐ 95‐646.02 Hex Driver 3.5mm (Hex. Flats 3.5mm) ‐1‐ 95‐646.01 Hex Driver, cannulated (Hex. Flats 5.0mm) ‐1‐ 95‐653.00 Medullary Exchange Tube ‐1‐ 95‐654.00 Internal Alignment Device ‐1‐ 95‐633.00 Depth Gauge ‐1‐ 95‐627.35 Twist Drill Dia.3.5mm x 305mm Length, calibrated ‐1‐ 95‐627.40 Twist Drill Dia. 4.0mm x 305mm Length, calibrated ‐1‐ 95‐628.00 Trocar Dia. 4.0mm x 240mm Length ‐1‐ 95‐630.00 Tip Threaded Guide Pin Dia. 1.8mm x 350mm Length ‐10‐ 95‐647.00 Open End Wrench width 17 / 14mm ‐2‐ 95‐631.00 Reamer / Nail ‐and Screw Template ‐1‐ 95‐632.00 Nail Length Gauge ‐1‐ 95‐637.00 Supine Driver ‐1‐ 95‐172.02 Handle with Jakobs Chuck ‐1‐ 95‐639.00 Skin Protector ‐1‐ 95‐640.00 Curved Awl ‐1‐ 95‐642.00 Tapered Reamer, cannulated, Dia. 13.5mm ‐1‐ 95‐645.01 Green Drill Sleeve Ø8.0mm ‐1‐ 95‐645.03 Silver Drill Sleeve Ø2.1mm ‐1‐ 95‐645.04 Gold Drill Sleeve Ø4.0mm ‐1‐ 95‐645.05 Black Drill Sleeve Ø3.5mm ‐1‐ 95‐634.00 Slide Hammer ‐1‐ 95‐652.00 Tibia Nail Extractor Bolt ‐1‐ 95‐652.50 Femoral Nail Extractor Bolt ‐1 95‐638.00 Length Gauge (used with Silver Drill Sleeve and Ø1.8mm x 350mm Guide Wire) ‐1‐

RECOMMENDED STERILIZATION CONTAINER FOR TRAY 95-965.50 and TRAY SET 95-970.10 CAT.NO.: PRODUCT DESCRIPTION: 60-502.10 Container 580 x 280 x 100 mm, Lid and Bottom perforated for Tray 95-965.50 60-502.26 Container 580 x 280 x 260 mm, Lid and Bottom perforated for Tray Set 95-970.10

14

CAT.NO. 95-965.70 PROXIMAL DEVICE FOR TITANIUM TIBIA NAILS

ASSEMBLY COMPONENTS FOR TIBIA PROXIMAL DEVICE

STRU

ASSEMBLY‘S

15

CAT.NO. 95-965.60 PROXIMAL DEVICE FOR TITANIUM FEMORAL NAILS

ASSEMBLY COMPONENTS FOR TIBIA PROXIMAL DEVICE

CAT.NO. 95-809.00 FEMORAL ADAPTER BOLT

16

CAT.NO. 95-648.00 UNIVERSAL SOCKET WRENCH, WIDTH 17 MM

CAT.NO. 95-646.01 HEX DRIVER , CANNULATED ( HEX. FLATS 5.0 MM )

CAT.NO. 95-646.02 HEX DRIVER, ( HEX. FLATS 3.5 MM )

CAT.NO. 95-653.00 MEDULLARY EXCHANGE TUBE

CAT.NO. 95-654.00 INTERNAL FRACTURE ALIGNMENT DEVICE

17

CAT.NO. 95‐633.00 DEPTH GAUGE

RECOMMENDED CANNULATED DRILL BITS WITH LENGTH 150 MM

CAT.NO.: PRODUCT DESCRIPTION: 95-625.35 Cannulated Drill Bit, Dia. 3.5 x Length 150mm, cannulated Hole Dia. 2.1mm 95-625.40 Cannulated Drill Bit, Dia. 4.0 x Length 150mm, cannulated Hole Dia. 2.1mm

RECOMMENDED ROUND SHAFT DRILL BITS WITH LENGTH 150 MM

CAT.NO.: PRODUCT DESCRIPTION: 95-626.35 Drill Bit, Dia. 3.5 x Length 150mm with Round Shaft 95-626.40 Drill Bit, Dia. 4.0 x Length 150mm with Round Shaft

TWIST DRILLS CALIBRATED WITH LENGTH 305 MM

CAT.NO.: PRODUCT DESCRIPTION: 95-627.35 Twist Drill Dia. 3.5mm x Length 305mm, calibrated 95-627.40 Twist Drill Dia. 4.0mm x Length 305mm, calibrated

CAT.NO. 95-628.00 TROCAR DIA. 4.0MM X LENGTH 240MM

CAT.NO. 95-630.00 TIP THREADED GUIDE PIN DIA. 1.8MM X LENGTH 350MM

18

NOTE – CAUTION!

GUIDE RODS WITH OLIVE OR BALL TIPS ARE ONLE APPLICABLE FOR FLEXIBLE REAMER SYSTEMS, DO NOT USE IT AS A GUIDE WIRE FOR NAILS

CAT.NO. 95-651.01 GUIDE ROD FOR IM NAIL DIA. 2.4MM X LENGTH 900MM

CAT.NO. 95-651.02 GUIDE ROD FOR IM NAIL DIA. 3.0MM X LENGTH 900MM

CAT.NO. 95-651.03 GUIDE ROD FOR REAMER, DIA. 2.0MM X LENGTH 900MM WITH DIA. 3.0MM OLIVE TIP ( used for flexible reamers dia. 6.0mm up to dia. 8.5mm )

CAT.NO. 95-651.04 GUIDE ROD FOR REAMER, Ø 3.0MM X LENGTH 900MM WITH DIA. 4.0MM OLIVE TIP ( used for flexible reamers dia. 9.0mm up to dia. 18.0mm )

CAT.NO. 95-651.05 GUIDE ROD DIA. 3.0MM X LENGTH 900MM WITH CURVED TIP

CAT.NO. 95-651.06 GUIDE ROD DIA. 2.4MM X LENGTH 900MM WITH CURVED TIP

CAT.NO. 95-647.00 OPEN END WRENCH WIDTH 17/14 MM

CAT.NO. 95-631.00 REAMER / NAIL ‐AND SCREW TEMPLATE

19

CAT.NO. 95-632.00 NAIL LENGTH GAUGE

CAT.NO. 95-638.00 SCREW LENGTH GAUGE ( used with green + silver drill sleeve and dia. 1.8mm x length 350mm guide wire )

ASSEMBLY COMPONENTS FOR USING THE SCREW LENGTH GAUGE

1. 95‐645.01 Green Drill Sleeve 2. 95‐645.03 Silver Drill Sleeve 3. 95‐630.00 Guide Wire Dia. 1.8mm x Length 350mm 4. 95‐638.00 Screw Length Gauge

4.

3.

2.

1.

__________________________________________________________________________________

CAT.NO. 95-634.00 SLIDE HAMMER

CAT.NO. 95-637.00 SUPINE DRIVER

20

CAT.NO. 95-652.00 TIBIA NAIL EXTRACTOR BOLT

CAT.NO. 95-652.50 FEMORAL NAIL EXTRACTOR BOLT

CAT.NO. 95-172.02 T‐HANDLE WITH KEY, JAKOBS CHUCK, CANNULATED DIA. 4.1MM

CAT.NO. 95-639.00 SKIN PROTECTOR

CAT.NO. 95-640.00 CURVED AWL

21

CAT.NO. 95-891.30 CANNULATED AWL ( used over guide wire dia. 2.4 / dia. 3.0mm )

CAT.NO. 95-642.00 TAPERED REAMER, CANNULATED, DIA. 13.5MM ( used over guide wire dia. 2.4 / dia. 3.0mm )

CAT.NO. 95-645.01 GREEN DRILL SLEEVE DIA. 8.0MM

CAT.NO. 95-645.03 SILVER DRILL SLEEVE DIA. 2.1MM

CAT.NO. 95-645.05 BLACK DRILL SLEEVE DIA. 3.5MM

CAT.NO. 95-645.04 GOLD DRILL SLEEVE DIA. 4.0MM

CAT.NO. 95-193.00 SCREW FORCEPS

22

RECOMMENDED DISTAL TARGETING DEVICE EQUIPMENT

DISTAL TARGETING INSTRUMENT SET USED FOR TITANIUM TIBIA AND FEMORAL NAIL SYSTEMNS TRUMENT SET OR TITANIUM CONTENT: PAGE 22 CAT.NO. 95-663.60 TRAY WITH LID FOR DISTAL TARGETING DEVICE INSTRUMENT SET ( EMPTY )

CONTENT: CAT.NO. 95‐963.00 DISTAL TARGETING DEVICE INSTRUMENT SET, USED FOR TITANIUM TIBIA ‐ AND FEMORAL NAIL SYSTEM CAT.NO.: PRODUCT DESCRIPTION: PCS.: 95‐663.60 Tray with Lid for Distal Targeting Device Instrument Set ( empty ) ‐1‐ 95‐662.00 Distal Targeting Device ‐1‐ 95‐659.05 Outrigger ‐1‐ 95‐659.10 Wrench with Inner Hex. width 14mm ‐1‐ 95‐663.00 Pre – Adjustment Device ‐1‐ 95‐965.80 Tibia Nail Adapter Block for Titanium Tibia Nails ‐1‐ 95‐659.02 Femoral Nail Adapter Block used for Steel and Titanium Femoral Nails ‐1‐ 95‐659.16 Fixation Hook – 15mm ‐1‐ 95‐659.20 Hook Impactor Sleeve ‐1‐ 95‐659.26 Hook Awl for 95‐659.16 ‐ 15mm ( width ) ‐1‐

= NOT INCLUDED IN THE SET AND NOT APPLICABLE FOR TITANIUM NAILING SYSTEM!

23


CAT.NO. 95-662.00 DISTAL TARGETING DEVICE

CAT.NO. 95-663.00 PRE ‐ ADJUSTMENT DEVICE

CAT.NO. 95-965.80 TIBIA NAIL ADAPTER BLOCK USED FOR TITANIUM TIBIA NAILS

24


CAT.NO. 95-659.02 FEMORAL NAIL ADAPTER BLOCK USED FOR STEEL AND TITANIUM FEMORAL NAILS

CAT.NO. 95-659.05 OUTRIGGER

CAT.NO. 95-659.10 WRENCH WITH INNER HEX. WIDTH 14 MM

25


CAT.NO. 95-659.16 FIXATION HOOK WIDTH 15 MM

CAT.NO. 95-659.20 HOOK IMPACTOR SLEEVE

CAT.NO. 95-659.26 HOOK AWL FOR 95‐659.16 – 15 MM ( WIDTH )

26


ORTHOMEDICAL SOLUTION WITHOUT COMPROMISE

general information - ortho-medical -tibia-f… · cannulated tibia nails cat. no. dia. mm length...

Documents