geomembranes - keytec

• BUND LINERS • SLURRY LAGOONS • GAS PROTECTION • FABRICATION & COMPONENT MANUFACTURERS • STORMWATER MANAGEMENT SYSTEMS • WATER FEATURES & GEOMEMBRANE LININGS

GeomembranesLINING SOLUTIONS

Keytec Environmental Ltd, Cumberland House, Cumberland Street, Leicester, LE1 4QS

Tel 0116 262 9106 Fax 0116 251 1802 email [email protected]

Welcome to Keytec

www.keytec.co.uk email: [email protected]

“Keytec Geomembrane products can be used in a variety of applications including Golf Courses, Sports Stadia, Shopping Centres, Warehouses, Residential and Commercial environments, plus many more...”

INTRODUCTIONKeytec Geomembranes is a private company, exclusively dedicated to the delivery of quality products and services to the construction and civil engineering industry. We have a wealth of relevant technical knowledge and experience of developing and installing geomembranes and gas protection products. Keytec manufactures gas barriers and components used by the engineering, construction, leisure, and oil and water industries. We also supply and install a wide range of geomembrane-geotextile products that help to protect the environment for the benefit of future generations.

OUR MISSIONKeytec Geomembranes aims to supply and install quality products and services that will benefit our customers and the construction industry.

OUR SERVICESThe company supplies and installs an extensive range of products including: Gas barriers, low and high density polyethylene, EPDM, polypropylene, fpa, pvc, eia, geosynthetic clay liners, adhesive sheet membranes, gas venting systems and geotextiles.

We manufacture Keytec 400 and Keytec multi gas barriers, gas venting systems, pipe sections and steel column cloaks. Our products have the approval of local authority building control, NHBC, the Environment Agency and water companies.

Our accumulated knowledge and engineering expertise, coupled with our enthusiasm for problem solving, enables Keytec Geomembranes to provide an efficient and reliable service, responsive to the needs of our clients.

Call us for a quotation without obligation. We will provide technical support or advice either on site, or from our Leicester office.

KEYTEC 400 GAS BARRIER

KEYFLEX

KEYSEAL

KEYTEC MULTI GAS BARRIER

KEYTEC MULTI GAS BARRIER TAPE SYSTEM

KEYTEC 642

KEYTEC 295

KEYTEC MRC1500

KEYTEC SUDS

KEYTEC GEOMEMBRANES

KEYTEC GEOTEXTILES

KEYTEC PREFABRICATION

CLIENT LIST

04-05

06

07

08

09

10

11

12

13 -14

15

16

17

18 - 19

CONTENTS

Gas Barrier400

Gas Barrier400

COMPOSITION

Scrim reinforced polyethylene and aluminium

MATERIAL SPECIFICATION

PROPERTY UNIT VALUE TEST METHODUnit weight g/m² 415 ASTM D1505Thickness mm 0.46 ASTM D5799Tensile strength k/N/m 9.47 ASTM D 6693.04Methane transmission cm³/h/m² less than 0.005 Oxygen transmission NILMoisture transmission g/m²/day less than 0.01Radon improvement factor 500-1 Puncture resistance N 142.1 ASTM D4833

Keytec 400 can be used in a variety of applications including the protection againt Methane, Radon, CO2 gases and also Hydrocarbon vapours.


Keytec 400 gas barrier: Specification methane and CO²

Keytec 400 gas membrane is loose laid to a prepared substrate. The membrane contains at least 15µ aluminium foil, reinforced with polyester multistrand scrim and encapsulated with polyethylene films. The puncture resistance has a CBR of at least 142N and maximum elongation of 3.3% with a minimum thickness of 0.46mm and a methane transmission of less than < 0.01cm³/m²/h. Keytec 400 is fully hot-air welded and tested for peel and sheer within the application.

KEY FEATURES• Five layer process membrane • Exceeds DPM standards • Extremely low gas transmission • Gas barrier for methane, carbon dioxide and radon

• Weldable with conventional hot air equipment • Aluminium foil core • Meets BS standards for DPC • NHBC approved

j40 FLEXIBLE SHEET TANKING/DAMP PROOF MEMBRANES

110. HARDCORE BEDS: Blind with not less than 50mm of soft sand or pulverized fuel ash and consolidated to provide a smooth bed free of sharp projections.

120. POLYETHYLENE DAMP PROOF MEMBRANE / GAS BARRIER: Manufacturer and reference: Keytec 400by Keytec Geomembranes. Telephone 0116 262 9106 Thickness / gauge: O.46mm

Methane transmission less than 0.005cm³/h/m²

Tensile MD 9.47kn/m

Moisture transmission less than 0.01g/m²/day

The membrane is loose laid to the formation with 100mm overlaps welded by hot air fusion at seams and terminated at the edge of the outer leaf of the structure.

Care must be taken to ensure that the gas membrane is not punctured prior to the casting of the concrete floor slab or screed.

All service entries are sealed with proprietary top-hat sections and heat welded to the gas barrier or adhesive methane membrane in the case of multi-ducts. [Keyflex GMA]

310. WORKMANSHIP GENERALLY:

Materials must be applied with care to provide a completely gas impervious and damp proof membrane.

360. JUNCTIONS WITH PROJECTING DPCs/ CAVITY TRAYS:Adjoining surfaces must be clean and dry. Projecting DPCs/ cavity trays: Lap, fully bond and seal with sheeting.

• Laps (minimum): 100mm. • Bonding/sealing: Manufacturers’ recommendations

370. PIPES, DUCTS AND CABLES:

Preformed collars are recommended for the purpose by the membrane manufacturer.

• Sealing: Fully bond to penetrations and sheeting.

• Completed junctions: Impervious.

Standard Detail

LAP & WELD OR KEYSEAL TAPE

LAP & WELD OR KEYSEAL TAPE

Air Brick & Cranked Sleeve

KEYTEC 400 GAS BARRIER Face Brickwork

Beam & Block Flooring

Clean Lap & Seal with Keyseal Tape

Air Bricks spaced to give min. 3000mm2 per metre of wall. Air Bricks to be spaced at centres no greater than 1.5 metres and 450mm from corners

18mm T & G Mositure Resistant Flooring Grade Chipboard on 125 Micron Polythene Vapour Barrier 25mm Flooring Grade Polythene

PARTY WALL

Vertical Keytec 400 Gas Barrier

2 layers 50mm Polystyrene providing insulation and retaining Keytec 400 Gas Barrier

DPC

Min 150mm LapKeytec 400 GasBarrier Lap &Keyseal Tape

2325

Sla

b - u

/s J

oist

s

2520

fin. fl

oor/fl

oor

100mm Cavity

255mm Joists

British Gypsum Dry Lining

50mm Polystyrene Cavity Wall Insulation

Continuous Cavity Tray

65mm Starter Block

Keytec 400 Gas Barrier across Cavity

Air Bricks & Cranked Sleeve

DPC

Continuous Cavity Tray

Air Brick & Straight Sleeve Beam & Block

Flooring

Beam & Block Flooring

DPC

DPC

Min 150

Min. 150mm Lap Clean & Double Tape using Keyseal Tape

DPC

05

Gas Barrier TapeKEYSEAL

Adhesive Gas MembraneKEYFLEX

An integrity testing service is available for all installations on request and third party accreditation.

Keytec 400 gas barrier can be applied to suspended block and beam floors and ground bearing concrete slab floors.

Industrial Housing

KEY FEATURES• Cold applied membrane • Self adhesive • High puncture resistance • Low vapour transmission • Impervious to radon gas • Low methane permeability

APPLICATION

Cut to size, remove backing paper, apply to substrate. Where applying to a friable surface the application of Keyflex primer is required. Apply by brush or roller, ensure primer is dry before fixing membrane to surface. For detailed application, contact our technical support staff.

SUGGESTED SPECIFICATION

The adhesive gas membrane, Keyflex AGM, must be applied to the substrate with 150mm overlap and contains the minimum gas transmission properties of < 0.03 ml / m² /24h @ atm and where masonry is friable, the substrate shall be primed with Keyflex primer.

COMPOSITIONAluminium foil reinforced bitumen rubber compound sheet, with biaxually-oriented HDPE film to one side.

PRODUCT• Size : 1.05m x 28.6m per roll • Weight : 1.2 Kg / m²• Thickness : 1.00mm • Water vapour transmission : < 0.1 g / m² / 24h ASTM E96• Methane transmission : < 0.03ml / m² / 24h • Radon diffusion coefficient : 5.0 10-14 m /² s NRPB• Puncture resistance : 250N ASTM E154

PRIMERA solution of bitumen in a blend of aromatic and aliphatic hydrocarbon solvents (OEL 100ppm 8 hrs TWA). Coverage rate 5 to 7 m² per litre, less on more porous substrates.

KEY FEATURES• High shear strength • High movement capability • High peel strength • Chemically resistant to dilute acid and alkalis • Available in five widths • Life expectancy, in excess of 20 years

APPLICATION

Optimum performance will be achieved when applied to clean, dry, dust and grease-free surfaces. Excellent adhesion to plastic, wood, metal and masonry. Recommended size application, 100mm & 70mm for polyethylenes, polypropylenes and butyl. 100mm, 70mm & 50mm for gas barriers. 30mm & 15mm radon barriers.

SUGGESTED SPECIFICATION

Keyseal Tape must be applied to a dry surface into a 150mm overlap of the membrane and pressed down firmly to achieve a gas tight seal. The tape should only be applied at temperatures above 5°C.

COMPOSITIONPolybutene, inert fillers and oil with elastomeric backbone, formed into an homogeneous tape carried on a release paper.

PRODUCT• Cross linked butyl compound • Size : 100mm, 70mm, 50mm, 30mm, 15mm• Colour : Black • Contains : No known toxic ingredients. Solvent free• Recommended service temp : -40°C to +110°C • Density : 1.6 g / cm² • Typical test results : Observed @ 20°C Elongation at break 200% • Force compress by 20% : 220N• Paintability : Good • Resistance to mould : Good• Service life (predicted) : 20 + years • Shrinkage : <0.5%• Shear strength : 16.2N • Slump : Nil• Tack : Very good • UV resistance : Very good• Movement accommodation : 15% • Moisture vapour transmission rate : 0.24g/m² 24 hours

06 07

Multi Gas Barrier Tape System

PROPERTY UNIT VALUE TEST METHOD

Thickness µm 300 EN 1849-2 Dimensions (width x length) m 3 x 50 Folded to 1.5m Roll weight kg 42.3 Colour Blue Radon permeability m2/s 4x10-12 CO2 permeability cm3/(m2 xd xbar) 950 DIN 53380-4 Equivalent air layer Thickness (23Cº 0/75%rf) m > 100 EN ISO 12572 Water vapour permeability (23Cº 0/75%rf) g/m/day 0.16 EN ISO 12572 Tensile strength MD N/mm > 24 EN 12311-2 CD N/mm > 21 Tensile elongation MD % > 500 EN 12311-2 CD % > 600 Tear resistance MD N > 75 EN 12310-2 CD N > 85 Nail tear resistance MD N > 190 EN 12310-1 CD N > 220 Resistance to shear of joints N > 200 EN 12317-2 Dimensional stability MD % -0.9 EN 1107-2 CD % +0.5 Puncture resistance N > 141 ASTM D4833

Multi Gas BarrierDPC

Pipe Cap

Sand Blinding(50mm minimum)

Compacted Hardcore

Radon Sump

100mm Pipe

Keytec Multi Gas Barrier continous fully sealed membrane

Keytec Gas Resisting Membrane

Keytec Multi Gas Barrier continous fully sealed membrane

Min 75mm

Min 75m

m

KEYTEC MULTI GAS BARRIER UNDER FLOATING SLAB WITH COLLECTION SUMP & VENT PIPE

NSAI Agrément Certificate 08/0322

Sealing of a structural steel stanchion penetration seal

COMPOSITIONKeytec multi gas barrier consists of self bonding polymer modified bitumen which is covered on one side by a tough multiply cross laminated polythene film and protected on one side by a backing sheet.

PRODUCT• Roll size : 150mm x 20m • Thickness : 1.5mm• Water vapour transmission (25ºC.75% rh) : 0.20g-m² per day• Radon transmission : < 3.2 - 10-10m/s• Radon permeability : < 4.8 - 10-13m/s• Puncture resistance : 220N

Keytec Multi Gas Barrier System can be used for the protection of structures against the ingress of CO2 and Radon gases and as a general purpose DPM.

Keytec multi gas barrier applied to prepared surface

Keytec multi gas barrier tape 150mm wide

SLAB

150mm

Keytec multi gas barrier applied to prepared surface

150mm wide Keyflex Tape

150mm

www.keytec.co.uk email: [email protected] 09

Reinforced Polyethylene Membrane 642

CONSTRUCTIONRaw material reinforcement Polyester multi-split fibreRaw material coating both sides LDPE

A fabric made with polyester reinforcement sandwiched between two polyethylene films.

SUGGESTED SPECIFICATION Keytec 642 is made from low-density polyethylene with 1000 denier polyester scrim reinforcement. The performance values of tensile strength are 24kN/m EN ISO 10319.96 and a drop cone test result in no greater than 8mm.The durability performance to be > 90% UV exposure to BS EN 1224 -2000 and oxidation resistance age test of less than 12% to ISO 13438.

PROPERTY UNIT VALUE TEST METHODUnit weight g/m² 628 BS ISO 965-95Thickness (2 KN/m² pressure) 1.03 BS EN 964-1-95Tensile strength at break MD kN/m 24.7 EN ISO 10319-96 C D kN/m 24.34 EN ISO 10319-96Elongation at strain MD % 33 EN ISO 10319-96 MD % 31 EN ISO 10319-96Trapezoid tear strength MD N 545 A STM D4533-96 C D N 381 A STM D4533-96Puncture resistance N 273.3 A STM D4833Oxidation resistance test age-% 11.58 I SO 13438-2004UV – exposure resistance % 90 BS EN 12224-2000

Keytec 642 is used in the construction of reed beds, lakes, ponds, slurry pits and SUDS.


CONSTRUCTIONRoll size : 1.83m x 150mFabrication to any given size.Contains ultraviolet inhibitors and is suitable for exposed applications.Resistant to Japanese Knotweed.

SUGGESTED SPECIFICATION Keytec 295 is constructed from high density polyethylene tapes coated with low density polyethylene to both faces. It has a mass per unit area of >290gm² and tensile elongation not greater than 24% ASTMD 751.

Polyethylene Coated Woven Polyethylene295

Keytec 295 is suitable for containment and land capping, temporary lining, bio-piles, Japanese Knotweed, wildlife barriers and under pavement drainage lining.


PROPERTY UNIT VALUE TEST METHODUnit weight g/m² 295 ASTM D3776 Thickness (2 KN/m² pressure) 0.6 BS EN 964-1-95Astm tapes 10cm warp 48 ASTM D3776 weft 48 ASTM D3776Tensile grab strength N warp 1180 ASTM D751 weft 1200 ASTM D751Tear strength * (tongue) N warp 300 ASTM D2261 weft 400 ASTM D2261Tensile strength MD kN/m 28 BSEN ISO 10319 CD kN/m 38.6 BSEN ISO 10319Tensile elongation % 23.6 ASTM D751Elongation at strain MD % 14.1 BSEN ISO 10319 CD % 15.4 BSEN ISO 10319Puncture resistance kN 4.13 BSEN ISO 12236Transverse direction mm 33.4 BSEN ISO 12236Scrim colour blackCoating thickness both sides µm black 65.3 ASTM D1777 MOD


Reinforced Chemical Resistant Membrane

MRC1500

WHAT IS MRC 1500?MRC1500 is a synthetic reinforced membrane based on a polyester textile which is molecularly coated with a high quality resin. The polyester tissue gives high mechanical properties to the membrane while the coating provides the waterproofing and chemical resistance. The tissue consists of polyester threads. The polyester tissue is firstly impregnated with a resin to avoid all wicking effects; then the tissues are coated with a resin. This resin is an “interethylene polymer resin” which provides the membrane with a high resistance against petroleum products and other chemicals. MRC1500 membrane is very flexible and has a high dimensional stability.

SUGGESTED SPECIFICATION Keytec MRC1500 is a synthetic reinforced membrane bored on a polyester textile which is molecularly coated with a high quality resin. It has a mass per unit area of 1092gm² and a thickness of 0.91mm.

EFFECT OF FLUID ON MEMBRANE - FLUID HAS LITTLE OR NO EFFECTFluid has little or no effect - Acetic acid (5%), Ammonium phosphate, Ammonium hydroxide, Ammonium sulphate, Antifreeze (ethylene glycol), Vinegar (8º), Butanone, Calcium chloride-solution, Calcium hydroxide, Chlorine solution (20%), Clorox (bleaching agent), Diesel, Ethanol, Phosphoric acid(50%), Glycerine, Hydrochloric acid HCI (50%), Hydrofluoric acid HF (5%), Hydrofluoric acid HF (50%), Isopropyl alcohol, Potassium chloride, Potassium sulphate, Kerosene, Magnesium chloride, Magnesium hydroxide, Fertiliser solution, Methanol, Mineral spirits, Sodium acetate solutions, Sodium bisulphate solution, Sodium phosphate, Sodium hydroxide (60%), Nitric acid (5%), Oils: ASTM type 3, animal, vegetable, hydraulic – petroleum, corn, crude, raw linseed, SAE-30, transformer, Terpentine, Water (potable) 23ºc, Water (sea) 23ºc, Zink chloride, Sulphuric acid (50%)

PROPERTY UNIT Thickness mm Weight g/m² Dimensional stability % Tear strength MD N/mm CD N/mm Tensile strength MD N CD N Adhesion Weld N/5cm Hydrostatic Resistance N/cm² Puncture resistance N Bursting strength N Thermal expansion coefficient Mm/mm/ºc Low temperature resistance ºcRoll width mRoll length m


Please view our website for further information

KEYTEC POLYPROPYLENE MEMBRANE


Thickness mm 1 ASTM D 5199 Density g/m³ .87 ASTM D 1505 Tensile strength at break N/mm 17 ASTM D 1693 Elongation at break % 900 ASTM D 1693 Puncture resistance N 150 ASTM D 4833 Tear resistance N 55 ASTM D 1004

KEYTEC LLDPE MEMBRANE


Thickness mm 1 ASTM D 5199 Density g/cm³ .94 ASTM D 792 Tensile strength at break N/mm 27 ASTM D 638 Elongation at break % 800 ASTM D 638 Puncture resistance N 250 ASTM D 4833 Tear resistance N 100 ASTM D 1004

CONSTRUCTION

Roll sizes on application. All other types of Geomembrane on application.

All welding Technicians are qualified by TWI to BS EN 13067, approval testing

for plastic welders, via the internationally recognised “Certification Scheme

for Welding Inspection Personnel (CSWIP).

KEYTEC 401 HYDROCARBON (VAPOUR) MEMBRANE


Thickness mm 0.46 ASTM D 5199 Density g/m² 415 ASTM D 1505 Tensile strength at break MD kN/m 9 ASTM 6693 CD kN/m 8.8 ASTM D 6693 Elongation at break MD % 6.5 ASTM D 6693 CD % 5.7 ASTM D 6693 Puncture resistance N 142.1 Tear resistance MD N 39.3 ASTM D 1004 CD N 38.7 ASTM D 1004

KEYTEC HDPE TEXTURED MEMBRANE


Thickness mm 1 ASTM D 5994 Density g/cm³ 0.94 ASTM D 1505 Tensile strength at break N/mm 11 ASTM D 6693 Elongation at break N/mm 150/700 ASTM D 6693 Puncture resistance N 320 ASTM D 4833 Tear resistance N 125 ASTM D 1004

Puraflex® HydroCarbon Resistant Membrane


Thickness mm 0.45 EN 1849-2 Density g/m2 430 EN 1849-2 Tensile strength at break MD MPa 53.4 ISO R 527-3 XD MPa 48.8 ISO R 527-3 Elongation at break MD % 920 ISO R 527-3 XD % 779 ISO R 527-3 Puncture resistance Resistance kN 1.47 EN ISO 12236 Movement mm 140.6 EN ISO 12236 Tear resistance MD N 45.8 ASTM D1004 XD N 45.7 ASTM D1004

Keytec Geomembranes


TEST METHODASTM D-751/DIN 53370ASTM D-751/DIN 53370ASTM D-1204/DIN 53377DIN 53515

ASTM D-751 (grab tensile)

ASTM D-715/ASTM D-413ASTM D-751ASTM D-751/D-4833ASTM D-751 (ball trip)ASTM D-696ASTM D-2136

VALUE0.9110920.5 max80077136463302175577 123833471.8 x 10-5 To -35 2.5200

AquaCell Systems - System SelectorSUDSSUDS

For detailed technical information visit www.intesio.co.uk

Specifying Keytec SUDS systems provides the following benefits:

• Significantly reduced flooding risk and compliance with Building Regs and CfSH/BREEAM by either: - Recharging of local groundwater (infiltration/soakaway application). - Controlling and reducing volume release of stormwater into watercourses (or existing sewer systems) by attenuation.• Aerobic purification to improve quality of surface water run-off.• Sustainable, cost effective management of the water environment.

Keytec Geomembranes can supply and install these systems with appropriate impermeable membrane according to the soil conditions and geotextile as a protection or for a soakaway.

AQUACELLPLUSFor Inspectability & Trafficked Sites

AQUACELLCOREFor Trafficked Sites

AQUACELLECOFor Landscaped or Non-Trafficked Sites

by

BBA CERTIFICATE 03/4018


NO YES NO YES

Will the base of tank be more than 4.25m deep?

Will the base of tank need to be installedextra deep (i.e. deeper than 4.1m

in ideal soil conditions)?

NO YES

Will the base of tank be more than 1.5m deep?

NO YES

Will both tank length and width bemore than 12m?

NO YES

Does the site have a high water table?

NO YES

Will the site be subject to traffic loading?

Use:to 4.25m deep

Eco AquaCell Eco*

Core AquaCell Core

Plus AquaCell Plus

Core

OR a combination of:to 1.5m deep andEcoto 4.25m deepCore

Use a combination of:

For any height greater than 2m or for tanks in high water tables please contact Wavin Technical Design on 0844 8565161.

* AquaCell Eco units cannot be directly connected to AquaCell Plus.

Maximum height of tank = 2m (5 Units). Allowable maximum depth to base of units is dependant on soil type, angle of shearing resistance, loading and groundwater level.The above depths are based on a 38° angle of shearing resistance and no groundwater.

to 1.5m deep with* Ecoto 4.25m deep andCoreto 5.08m deepPlus

Use:to 4.1m deepCore

Use a combination of:to 4.1m deep andCoreto 4.78m deepPlus

Use:to 1.5m deep Eco

The following selector will help you to determine which AquaCell system, or combination of systems, is the correct choice for a particular project.

Keytec SUDS can be used as the most efficient capture, transportation, cleansing, infiltration, attenuation and re-use of storm water at source.

15

Keytec GeomembranesPROPERTY UNIT 200 300 TEST METHOD

Thickness mm 1.4 1.8 EN ISO 9864

Area weight g/m² 200 300 EN 9863

Strength MD kN/m 16 25 EN ISO 10319

Strength CD kN/m 16 25 EN ISO 10319

Elongation MD % 45 50 EN ISO 10319

Elongation CD % 45 55 EN ISO 10319

CBR puncture resistance kN 4.2 2.8 EN ISO 12236

Cone drop test mm 13 19 EN ISO 13433

Opening size 090 mm 0.09 0.07 EN ISO 12956

Permeability m.sˉ¹ - l/m²s 0.06/60 0.04/40 EN ISO 11058

Roll Width m 2.5 2.5

Length m 100 100

The values correspond to average results obtained and are indicative. Above mentioned data is informative only.

THERE ARE 3 TYPES OF GEOTEXTILES

• Spun bonded (polyesters, spun glass ) Application, drainage and road construction

• Woven (polypropylene, polyester) Application, ground stability, road construction

• Needle punched (polypropylene) Application, all types of protection to membrane lining

Larger roll sizes and specification available on request.

SPECIALIST SUB-CONTRACT INSTALLATION SERVICES

Keytec Geotextiles can be used for infiltration, separation and liner protection for a multitude of applications including road, railway, slope protection, river bed & bank protection, landfill construction, drainage (SUDS).

Keytec Geotextile

All of the above can be supplied in pre-fabricated form for self installation.

• Installers of adhesive sheet membrane

• Water industry liners and associated works

• Reservoir roof waterproof liners

• Reed bed liners

• Pond & lagoon liners

• Bund liners

• Stainless steel and aluminium components

• Slurry pit liners

• Gas protection

• Manufacturers of gas barriers (Keytec 400 and Keytec Multi)

• Methane, carbon dioxide and radon protection

• Hydrocarbon protection

• Gas ventilation systems and bespoke vents

• Cut-off trench liners

• Stormwater management systems (SUDS)

• Adhesive sheet membrane systems

• Reservoir roofs, walls, basements and underground structures

• Anti-slip membranes

• Waste containment

• Japanese Knotweed containment


DISCLAIMER

The properties and values presented herein are to be considered only typical. No warranty or guarantee expressed or implied is made regarding the performance of the product, since the manner of use and handling is beyond our control.

Nothing contained herein is to be construed as permission or as a recommendation to infringe any patent.

17

VALUE




by

Industry PartnersClient ListSome of the clients that have used the services of Keytec Geomembranes: Keytec are an ISO 9001 Registered Firm, members of the International Accreditation Board

and the Utilities Prequalification Scheme.

Keytec are also proud to be industry partners with all of the following:

Puraflex® is a Registered Trade Name of Industrial Textiles & Plastics Ltd.

CONTRACTORSAcrabuild (Anglia) Anderson Group Appollo Property Services Ashvale CE Balfour Beatty CE BAM Nuttall CE Barnwood Construction Bestcon CE (Eire)Birch BrothersBridgebankCadman ConstructionCarter Lauren ConstructionDawnus ConstructionFrankis SolutionsFred Champion GroundworksFoundation DevelopmentsGaliford Try Group G F Tomlinson Ground Construct Hewitt Sportsturf Houlihan & Co Interserve Group ISG Regions J Breheny ContractorsJones Brothers (Henlan)

DEVELOPERSBarratt Homes GroupBellway HomesHerbert Leach HomesJelson HomesMidas HomesMiller HomesPersimmon Homes GroupRoe DevelopmentsTaylor WimpeyWestern Homes

BUILDERS MERCHANTSKeyline Travis Perkins SwiftecSIGWrekin W T Burdens

K W Bell ContractorsKier GroupKiernan ConstructionLeadbitterLand & Water ServicesLaing O’RourkeLeicestershire CCMcMahon ContractorsMorgan Sindall PLCM V KellyR G CarterO’Brien ContractorsO’Halloran & O’BrienP B DoyleReilly GroundworksRochford ContractorsSevern Trent WaterSouth Midland ConstructionTamdown GroupTarmac National ContractingTrant ConstructionVinci GroupWates Group

Keytec is working for a safer environment...


geomembranes - keytec

Documents