georgia tech global learning centermnf2018.me.gatech.edu/files/mnf 2018 program v3.pdf ·...
TRANSCRIPT
Georgia Tech Global Learning Center
Sponsored by:
2
Micro Nano Flows 2018, September 9-12, 2018, Georgia Institute of Technology, Atlanta, GA, USA
September 10
8:00-9:00 Registration
9:00-9:05 Conference Introduction (T. Karayiannis, Brunel University London)
9:05-9:20 Welcome and Conference Outline and Logistics (S. Garimella, Georgia Institute of
Technology)
9:20-9:50 Welcome Talk - Micro-Nano Frontiers at Georgia Tech (S. Graham, Georgia Institute of
Technology)
9:50-10:30 Plenary Talk - Microscale multiphase flows for point of care diagnostics (S. Balabani,
University College London) Chair: T. Karayiannis
10:30-10:50 Coffee Break
10:50-12:30 TS 1A: Boiling and Condensation I TS 1B: Heat Exchangers and Reactors
12:30-13:30 Buffet Lunch
13:30-14:10 Keynote 1 - The role of hydrophobicity on early onset and enhancement of nucleate
boiling (Y. Takata, Kyushu University) Chair: D. Orejon
14:10-15:50 TS 2A: Micro Nano Flow Fundamentals TS 2B: Heat Transfer Applications I
15:50-16:10 Coffee Break
16:10-16:30 Sponsor Talk – Little Things Factory
16:30-17:50 TS 3A: Mixing and Design TS 3B: Lab on a Chip
September 11
8:30-9:10
Keynote 2 - Temporal and Spatial Biphilicity to Enhance and Control Pool Boiling: Experimental Achievements and Modeling Opportunities (D. Attinger, Iowa State
University) Chair: M. Derby
9:10-10:50 TS 4A: Heat Transfer Applications II TS 4B: Single Phase Heat Transfer
10:50-11:10 Coffee Break
11:10-12:30 TS 5A: Mathematical Simulation I TS 5B: Nanofluids, Rattner
12:30-13:30 Buffet Lunch
13:30-14:10 Keynote 3 - Microscale phenomena during dropwise condensation of saturated
steam (D. Del Col, University of Padova) Chair: B. Fronk
14:10-15:30 TS 6A: Measuring, Sensing, and Control TS 6B: Boiling and Condensation II
17:30-18:30 Conference Reception: Renaissance Hotel Rooftop
18:30-20:30 Conference Dinner: Renaissance Hotel
September 12
8:30-9:10 Keynote 4 - Microfluidic models of scaffolds for regenerative medicine (G. Dubini,
Politecnico di Milano) Chair: T. Sulchek
9:10-10:30 TS 7A: Mathematical Simulation II TS 7B: Boiling and Condensation III
10:30-10:50 Coffee Break
10:50-12:30 TS 8A: Biomedical Flow Structures
12:30-12:50 Conference Closing
12:50-13:50 Boxed Lunch
13:50-15:30 Lab Tours
3
Note: All ‘A’ sessions will be held in Room 222, while all ‘B’ sessions will be held in Room 225
Session 1: September 10, 2018 10:50-12:30
Session 1A: Boiling and Condensation I (Chair: T. Bandhauer) Session 1B: Heat Exchangers and Reactors (Chair: M. Derby)
Characterization of Nanostructure-Supported Evaporation under a Growing
Bubble (S. Ridwan, Drexel University)
Anti-Icing Meter Scale Superhydrophobic Heat Exchangers (K. Boyina,
University of Illinois Urbana-Champaign)
Flow boiling of HFE-7100 in Multi-Microchannels: Aspect Ratio Effect (T.
Karayiannis, Brunel University London)
De-Wetting and Condensate Removal from Ambiphilic Microchannels (R.
Winter, Drexel University)
Condensation Diffusion Boundary Layer Mixing by Jumping Droplet
Condensation (L. Li, University of Illinois Urbana-Champaign)
Heat transfer enhancement by oscillatory baffled flows (R. Law, Newcastle
University)
Contact Angle Dynamics during the Evaporation of Water from Hydrophilic
and Hydrophobic Graphene Surfaces (P. Chakraborty, Kansas State
University)
Distribution of Saturated Refrigerants in Microchannel Heat Exchanger
Headers (A. Mahvi, Georgia Institute of Technology)
Experimental Study of Flow Boiling Heat Transfer in Microgaps with
Variable Power and Area Densities (L. Lorenzini, Georgia Institute of
Technology)
Micro-mixing performance of mesoscale oscillatory baffled reactors (J.
McDonough, Newcastle University)
Session 2: September 10, 2018 14:10-15:50
Session 2A: Micro Nano Flow Fundamentals (Chair: S. Rao) Session 2B: Heat Transfer Applications I (Chair: B. Fronk)
Study of droplet formation in microchannels using the two-colour PIV
technique (E. Roumpea, University College London)
Enhanced dropwise condensation on a hydrophilic-slippery surface with
small contact angle and small sliding angle (L. Guo, Xi'an Jiaotong
University)
Micro- and Nanostructures Role on Enhancement of Surface Heat Transfer in
Microchannel Flow Boiling Process (S. Moghaddam, University of Florida)
Microscale Single Phase Cooling Techniques for Durable Electronic
Packages (D. Pahinkar, Georgia Institute of Technology)
Flow Regime Mapping of Small-Scale Gas-Solid Fluidized Beds (J.
McDonough, Newcastle University)
SAW-Pirani vacuum sensor with extended range and sensitivity (S. Toto,
Karlsruhe Institute of Technology)
Particle separation in small cross-section spiral microchannels using weakly
developed Dean flows (G. Kim, Georgia Institute of Technology)
Comparison of Experimental and Computational Heat Transfer
Characterization of Water Jet Impingement Array with Interspersed Fluid
Extraction (T. Bandhauer, Colorado State University)
An Optimization Study on Thermal Energy Harvesting from Micro Cavitating
Flows (A. Kosar, Sabanci University)
4
Session 3: September 10, 2018 16:30-17:50
Session 3A: Mixing and Design (Chair: J. Meacham) Session 3B: Lab on a Chip (Chair: S. Balabani)
Computational study of a novel Knudsen pump design exploiting drilling and
3D printing techniques in low thermal conductivity materials (G. López
Quesada, INSA Toulouse)
Ferrohydrodynamic Separation of Circulating Tumor Cells (L. Mao,
University of Georgia)
Time-resolved Characterization of Unsteady Microscale Flows (S. Zhang,
University College London)
Microfluidics To Relate Cell Biophysical Properties to Cell Functional
Properties (T. Sulchek, Georgia Institute of Technology)
All in One - Advanced technologies for complex low cost microfluidic
devices in glass, silicon and quartz (K. Kadel, Little Things Factory)
Ultrafast microfluidic cell compression for intracellular macromolecule
delivery (A. Liu, Georgia Institute of Technology)
The effect of curvature angle on mixing efficiency in curvilinear
microchannels (A. Kosar, Sabanci University)
A Microfluidic Platform for Single-Step Isolation and Mechanotyping of
Ovarian Cancer Cells from Patient Samples (N. Stone, Georgia Institute of
Technology)
Session 4: September 11, 2018 9:10-10:50
Session 4A: Heat Transfer Applications II (Chair: D. del Col) Session 4B: Single Phase Heat Transfer (Chair: G. Dubini)
Temperature Swing Adsorption Processes for Gas Separation (D. Pahinkar,
Georgia Institute of Technology)
Fluid dynamics and thermal analysis of different Micro-Cells geometries (M.
Spizzichino, University La Sapienza)
Characteristics of pressure drop instability in microchannel cooling system
(Q. Jin, Rensselaer Polytechnic Institute)
Buoyancy Influenced Heat Transfer Performance of Supercritical Carbon
Dioxide in Microchannel Heat Exchangers—Horizontal Flow Configuration
(S. Jajja, Oregon State University)
Surface structure enhanced microchannel flow boiling of HFE-7100 (J.
Sircar, Massachusetts Institute of Technology)
Heat Transfer Performance of Heated Upward Turbulent Supercritical CO2
Flow in a Microchannel: A Numerical Study (M. Nabil, The Pennsylvania
State University)
Advanced CFD methodology to investigate heat exchanger performance and
experimental validation of a reduced model for a micro-CHP application (J.
Joseph, Karlsruhe Institute of Technology)
Heat Transfer Enhancement in Liquids Using Self-Propelled Particles (J.
Moran, George Mason University)
Experimental Investigation of Condensation Phenomenon on Hydrophilic and
Hydrophobic Titanium (Ti) Pillared Glass Surfaces (M. Haque, Kansas State
University)
5
Session 5: September 11, 2018 11:10-12:30
Session 5A: Mathematical Simulation I (Chair: D. Lorenzini) Session 5B: Nanofluids (Chair: A. Rattner)
Numerical simulation of liquid-liquid slug flow in a square microchannel of
cross-shaped junction (R. Filimonov, Lappeenranta University of
Technology)
Mass Transfer Enhancement of Nanofluids in a Closed System (S. Kim,
Korea University)
The effect of gas-phase transport on buoyancy-Marangoni convection in
confined volatile binary fluids (T. Qin, Georgia Institute of Technology)
Nanodiamond nanofluids: Microstructural analysis and heat transfer study (E.
Languri, Tennessee Tech University)
Characterizing Evaporation of a Sessile Droplet using Quartz Crystal
Microbalance (B. Murray, Rensselaer Polytechnic Institute)
Thermal-Hydraulic Property of SiO2 - Ethylene Glycol/Water Nanofluid (S.
Hashimoto, Toyota Central R&D Labs)
Investigating Rocks Permeability from Network Modelling to Direct
Simulation (M. Tembely, Khalifa University)
Session 6: September 11, 2018 14:10-15:30
Session 6A: Measuring, Sensing, and Control (Chair: A. Mahvi) Session 6B: Boiling and Condensation II (Chair: M. McCarthy)
Visualization experimental of supercooled water in a microchannel using near
infrared absorption imaging technique (T. Yamada, Nagoya Institute of
Technology)
Soft Lithography Replication of Bioinspired G. dalenii Surface for
Condensation, Fog Harvesting and Microfluidic Applications (D. Orejon,
Kyushu University)
Development of Viscosity Measurement Technique in Microchannel Using
Fluorescence Polarization Method (T. Nakagawa, Kyoto University)
Condensation Limits on Biphilic Surfaces (M. Kim, University of Illinois
Urbana-Champaign)
Acoustic platform for nanoscale molecular synthesis and detection (M.
Binkley, Washington University in Saint Louis)
The Role of Surface Wettability on Dropwise Condensation (H. Cha,
University of Illinois Urbana-Champaign)
Evaluation of Particle Motion Characteristics in Microchannel Flow
Alignment System with Ladder-type Electrodes (A. Noma, Kyoto University)
Competition Between Wicking and Evaporation in Structure-Enhanced Pool
Boiling Critical Heat Flux (H. Hu, Purdue University)
6
Session 7: September 12, 2018 9:10-10:30
Session 7A: Mathematical Simulation II (Chair: D. Attinger) Session 7B: Boiling and Condensation III (Chair: T. Karayiannis)
Nanoparticle Diffusion in Microvessels (Z. Liu, Georgia Institute of
Technology)
Interfacial Heat Transfer Measurements during Flow Boiling in a PDMS
Rectangular Microchannel (S. Korniliou, Brunel University London)
Modeling collective biophysical behavior of platelets in blood clotting (Y.
Sun, Georgia Institute of Technology)
Two-Phase Flow in Plain and Enhanced Narrow Gaps: Pressure Drop and
Interfacial Area Density Trends (A. Rattner, The Pennsylvania State
University)
Cross-stream inertial migration of rigid microparticles in a pressure-driven
flow of a power-law fluid (F. Chrit, Georgia Institute of Technology)
Passively Regulate Two-Phase Flow Patterns of Flow Boiling in
Microchannels (C. Li, University of South Carolina)
Investigation of Lymphatic Valve and Vessel Operation via Computational
Modeling (K. Wolf, Georgia Institute of Technology)
Droplet Growth Kinetics During Dropwise Condensation (J. Carpenter,
University of Illinois Urbana-Champaign)
Session 8: September 12, 2018 10:50-12:30
Biomedical Flow Structures (T. Sulchek) – Room 222
Nanoparticle Transport in Microvascular Bifurcations (Z. Liu, Georgia Institute of Technology)
Velocity, hematocrit and aggregation characteristics of stiffened erythrocytes in microflow (A. Passos, University College London)
Particle and Red Blood Cell Concentration Distributions in Narrow Microchannel Flows with Wall Effects (K. Tatsumi, Kyoto University)
Arterial Thrombosis Microfluidics: Control of the Third Dimension by Grayscale Lithography (M. Griffin, Georgia Institute of Technology)
Controlling the Conformational Changes of vWF in Shear Flow with Charged Nanoparticles (Y. Zhu, Georgia Institute of Technology)
7
Global Learning Center, 2nd Floor