get oracle 8i running on your linux server straight away! roger schrag database specialists, inc. ...
TRANSCRIPT
Get Oracle 8i Running on Your Linux Server Straight Away!
Roger Schrag
Database Specialists, Inc.
www.dbspecialists.com
Oracle Open World 2000
Paper #276
Today’s Presentation
• Oracle products available on Linux
• Differences and limitations of Oracle’s
offerings for Linux
• Getting Linux-specific information about
Oracle
• Installing Oracle on Linux
Today's Goals
• Learn how Oracle 8i on Linux differs from Oracle 8i on other platforms
• Learn how to install Oracle 8i correctly on Linux
• Gain familiarity with database setup best practices
Related Material Available
• 50 page workbook from LinuxWorld Expo• Accompanying 87 slide presentation• 15 page step-by-step guide to installing Oracle 8i
Release 2 (8.1.6) on Red Hat 6.2 Linux
Today’s presentation is based on a half-day training session I led at LinuxWorld Expo in 1999. The material has been condensed to fit a one hour timeslot and has been thoroughly updated to cover Oracle 8i Release 2.
At http://www.dbspecialists.com/4dbas/present.html:
Oracle Products Available on Linux
• Oracle 8i Enterprise Edition
• Oracle 8i Standard Edition
• WebDB
• Oracle Application Server
In this presentation we will only be looking at Oracle 8i.
Oracle 8i Versions Available on Linux
Version Also Known As Recommendation
8.1.6 Oracle 8i Release 2 Use this one!
8.1.5 Oracle 8i Release 1 Harder to install. Not worth the hassle!
8.0.5 Oracle8 Obsolete
Oracle 8i on Linux: Differences
• Operating system release and patch requirements
• Method for setting kernel parameters
• Location of oratab file
Oracle 8i on Linux is extremely similar to Oracle 8i on Solaris. A few areas of difference are:
Operating System Release and Patch Requirements
Red Hat 6.0
Red Hat 6.1
Red Hat 6.2
SuSE 6.3SuSE 6.4
TurboLinux 6.0.2
Oracle 8i Release 2 is certified on the following Linux distributions:
Notes on Operating System Requirements
• Some users have also found that Oracle 8i Release 2 works properly on Mandrake 7.1 (complete).
• You should be able to use the GNOME or KDE window manager without problems.
I installed Oracle 8i Release 2 in a Red Hat 6.2 environment with GNOME. Out of the box, everything ran smoothly. No operating system patches or additional RPMs were necessary.
Setting Linux Kernel ParametersOracle 8i on Linux requires the same kernel parameter settings as Oracle 8i on Solaris for SPARC. However, the default kernel parameter settings and how you go about changing them are very, very different.
• Default kernel settings on Red Hat 6.2 will work, but SEMOPM
should be increased to meet the documented minimum requirement.
• Adjust kernel parameter settings by editing two files and rebuilding
the kernel:• /usr/src/linux/include/asm/shmparam.h• /usr/src/linux/include/linux/sem.h
Location of oratab file
/etc/oratab
instead of
/var/opt/oracle/oratab
Oracle 8i on Linux: Limitations
• The following features and options are not available with the Linux release of Oracle 8i:
• Oracle Parallel Server
• Legato Storage Manager
• Internet Directory Server
• JDBC drivers for JDK 1.2
• In addition, the Oracle Data Migration Assistant on Linux is not capable of upgrading an Oracle 8.0.5 database to Oracle 8i Release 2
Oracle 8i Information Specific to the Linux Platform
• Documentation provided by Oracle Corporation- Oracle 8i Release 2 for Linux Intel Installation Guide- Oracle 8i Release 2 for Linux Intel Administrator's
Reference- Oracle 8i Release Notes for Linux Intel
• Text files in $ORACLE_HOME/relnotes- Actually, these seem to be more specific to Solaris
than Linux!
Oracle 8i Information Specific to the Linux Platform
(continued)• Oracle Technology Network http://technet
.oracle.com- Technical discussion forums- Technical papers
(Be careful! Some are quite out of date!)
• Prepare the server
• Install the Oracle software and create a simple database
• Create a scalable Oracle database (optional)
• Complete the server configuration
Installing Oracle on Linux
Prepare the Server
1. Meet the software requirements
2. Meet the hardware requirements
3. Meet the kernel parameter requirements
4. Get access to an X environment
5. Create a Linux group for DBAs
6. Create a software owner Linux account
7. Create mount points
Prepare the Server(continued)
8. Choose a local bin directory
9. Mount the CD ROM
10. Create the /etc/oratab file
Install the Oracle Software and Create a Simple Database
1. Edit software owner’s login script
2. Log in using X environment
3. Verify that TCP/IP is working
4. Ensure there is enough storage space available
Install the Oracle Software(continued)
5. Start the Oracle Universal Installer
Install the Oracle Software(continued)
6. Choose the DBA group
Install the Oracle Software(continued)
7. Choose to perform a “typical” install of Oracle 8i
Install the Oracle Software(continued)
8. Specify a name for the database
Install the Oracle Software(continued)
9. Specify a mount point for the database. Resolve permissions problems on the mount point if needed.
Install the Oracle Software(continued)
10. Launch the installation
Install the Oracle Software (continued)
11. Run root.sh
12. Deinstall products that were part of the “typical”
install but you are not licensed to use13. Perform a “custom” install if necessary to install
products that are not part of the “typical” install
14. Add enhancements to the oraenv script
15. Fix a bug in the dbstart script
16. Add enhancements to the dbshut script
Create a Scalable Oracle Database
The simple database created during a “typical” Oracle software installation is suitable for playing around, but not much more. Follow these optional steps if you wish
to replace the simple database with a scalable one.
1. Remove the simple database2. Choose a block size for the scalable database3. Log in using X environment4. Ensure there is enough storage space available
Create a Scalable Oracle Database(continued)
5. Run the Database Configuration Assistant
Create a Scalable Oracle Database(continued)
6. Choose to perform a “custom” database creation
Create a Scalable Oracle Database(continued)
7. Select options to be configured
Create a Scalable Oracle Database(continued)
8. Specify a name for the database
Create a Scalable Oracle Database(continued)
9. Specify locations for the control files.
Note that the defaults provided are not OFA compliant!
Create a Scalable Oracle Database(continued)
10. Specify locations, sizes, default storage for the six data files.
Again, the defaults are not OFA compliant. Also, make sure the system tablespace is big enough or auto-extend remains enabled!
Create a Scalable Oracle Database(continued)
11. Specify locations and sizes for the online redo logs
Create a Scalable Oracle Database(continued)
12. Specify SGA sizing parameters
Create a Scalable Oracle Database(continued)
13. Choose to create the database now or build a set of shell scripts you can run later. If you choose to create the database now, be prepared to wait!
Create a Scalable Oracle Database(continued)
14. Configure the Net8 listener
15. Prepare a tnsnames.ora file
16. Improve the parameter file
17. Configure the temporary tablespace
18. Configure rollback segments
19. Create application tablespaces
20. Create application schemas and roles
Complete the Server Configuration
1. Update the /etc/oratab file
2. Remove hardcoding from software owner’s login script
3. Create separate Linux accounts for database users
4. Configure automatic database start on server reboot
Wrapping Up
• Oracle 8i Release 2 installs easily on Linux
• Oracle 8i Release 2 runs solidly on Linux
• Linux is an excellent choice as a stable, reliable, low cost platform for running Oracle 8i
Contact Information
Roger Schrag
Database Specialists, Inc.
388 Market Street, Suite 400
San Francisco, CA 94111
415-344-0500