Get Pumping in Less Time

PERISTALTIC PUMPS & TUBING

ColeParmer.com2

Peristaltic Pumps & Tubing

Easy selection and setup No need to select a separate pump head and drive—with its integrated design, the Catalyst FH series of pumps is ready for use right out of the box! Plus, the unique rapid-load pump head allows fast and easy tubing changes, minimizing downtime.

A pump head consists of only two parts: the rotor and the housing.The tubing is placed in the tubing bed— between the rotor andhousing—where it is occluded (squeezed).

1The rollers on the rotor move across the tubing, pushing the fluid. Tubing behind the rollers recovers its shape, creating a vacuum and drawing in fluid behind it.

A “pillow” of fluid is formed between the rollers. This is specificto the ID of the tubing and the geometry of the rotor. Flow rate is determined by multiplying speed by the size of the pillow. This pillow stays fairly constant except with extremely viscous fluids.

2 3

How It Works

ColeParmer.com 3

Versatile and space-saving - Conserve valuable lab space with

compact, stackable units

- Arrives fully assembled, reducing setup time

- Automate your process by integrating pumps with plant control systems

- Meets a wide range of fluid handling needs and provides long-term, reliable service

- Intuitive interface for simple control in seven different languages (FH100D/DX and FH100M models only)

- Ensure years of reliable service with robust design

- Pumps comply with UL, ETL, CE, C1 standards and RoHS2 and WEEE directives

Use in many applications - Sample preparation

- General, media, and reagent dispensing

- Filling

- Buffer recirculation

- Chromatography

- Reagent metering

- Sampling

- Lab analyzers

- Scale-up

ColeParmer.com4

FH10, FH15, and FH30 Pumps

Quality design in a compact packageEnhanced and versatile performance in an ultra- compact, low-maintenance design! Catalyst pumps come as a complete system: a pump, motor, and control in a stackable steel housing. With standard flow ranges from 0.002 to 105 mL/min and pressures to 2.1 bar (30 psig), these instrument-quality pumps offer an ideal, cost-effective alternative to syringe pumps. A robust, fixed occlusion design allows for reliable, accurate pumping and dispensing with a wide variety of tubing materials and varying differential pressure applications.

ColeParmer.com 5

Easy maintenance - Simple, fast tubing changes

- Fixed occlusion eliminates adjustment after tubing changes and ensures operation at pressures up to 2.1 bar (30 psig)

Simple to use - Contamination-free pumping—fluid contacts only the

tubing material

- Controls are mounted on front panel

- Separate single-turn speed control maintains speed setting when turning pump on and off

- Flow direction switch with center “OFF” position

- Green “power ON” LED indicator

- “Prime” button runs pump at maximum speed to rapidly prime or flush tubing

- Reversible pump direction permits purging of tubing prior to use

FH10 FH15 FH30

Catalyst model FH10 FH15 FH30

Catalog number MK-77720-00 MK-77720-02 MK-77720-04 MK-77720-20 MK-77720-30Performance Number of channels 1 1 1 1 2Flow capacity (mL/min) 0.002 to 1.65 0.017 to 11 0.07 to 50 0.8 to 105 0.8 to 14rpm 1.7 to 10 13 to 80 50 to 300 20 to 100 20 to 100Electrical Voltage (50/60 Hz) 90 to 130 or 160 to 260 VAC (auto selected)Motor type PMDCControl type PWM (pulse width modulated)Physical Operating temperature 0 to 40ºC (32 to 104ºF)Storage temperature –25 to 65ºC (–13 to 149ºF)Housing materials Powder-coated steelIP rating IP22Controller dimensions (L × W × H) 17.8 x 13.4 x 11.4 cm (7" x 51⁄4" x 41⁄2")Shipping weight 1.5 kg (3.3 lb)

Specifications & Ordering Information

See pages 10–12 for tubing performance and selection.

Diverse performance range - Flow rates from 2 µL/min to 105 mL/min

- Pressure up to 2.1 bar (30 psig)

- Accurate and repeatable flow delivery

- Address a wide range of critical applications with available materials

- Accommodates all sizes and formulations of microbore flow-rated tubing

Ergonomic design - Space efficient—low profile, stackable design

- Remote capability—actuate unit with a foot switch or contact closure

6 ColeParmer.com

FH100, FH100X, FH100D, and FH100DX Pumps

Precision metering and dispensing, worry-free performanceCatalyst FH100 and FH100X peristaltic pumps are ideal general-purpose tubing pumps for high-repeatability, precision metering, and worry-free performance in life science, industrial, and process applications. Their broad flow range capabilities make them ideal for laboratory to pilot process scale-up requirements. These pumps offer a reliable alternative to lab piston metering pumps, gear pumps, and small circulating pumps used in life science labs.

They feature a digital display of speed (rpm) for accurate control and repeatability. These stackable, variable-speed pumps are also self-priming, able to operate dry, and contain no valves or seals—eliminating replacement needs.

Catalyst FH100D and FH100DX peristaltic pumps are specifically designed for critical metering and dispensing applications—you can pump, dispense, and fill—all with one unit. These pumps are simple to set up as dosing pumps or dispensing systems by volume, time, or copy mode with a timed interval. A clear multiline LCD displays all operational parameters. The pumps are also reversible, allowing for purging of transfer lines or emptying containers.

Catalyst FH100D and FH100DX systems provide important advantages for users, including single-channel flow from 0.5 to 4000 mL/min at a variable speed range of 4 to 400 rpm. The powerful motor provides greater than 0.25% speed control accuracy and repeatability, as well as remote control operation.

ColeParmer.com 7

Easy maintenance - Rapid tubing changes in less than 30 seconds—tubing

occlusion is automatic when pump head is closed

- Robust motor and drive system provides low-maintenance, long-term operation

- Contamination-free pumping—the fluid contacts only the tubing material

Simple to use - Intuitive control keypad—easily increase or decrease flow

- Programmable in seven languages—provides easy setup in almost any global location (FH100D and 100DX models)

- Universal voltage and frequency capability allows operation worldwide—IEC320 socket and cord/plug set provided

- Reversible pump direction permits purging of tubing before or after use

- Quick-start guide included for fast start-up

Specifications & Ordering Information

FH100 FH100DX

Diverse performance range - Utilize various tubing sizes to provide a broad flow range

- Ability to pump against pressure up to 4.1 bar (60 psig) providing longer filtration cycles

- Control capabilities include programmable dispensing by volume, time, or copy modes with a programmable delay between cycles for convenient, automated dispensing (FH100D and 100DX models)

Ergonomic design - Interlock powers unit down when pump head is opened

- Remote control capability—ideal for automated process applications

- Accurate, reliable control of flow and dosing—digital display of RPM for repeatable control

- Optimize system accuracy by calibrating the pump system under application conditions—the calibration is stored in memory—one calibration value per tubing size (FH100D and 100DX models)

Catalyst model FH100 (thin-wall tubing) FH100X (thick-wall tubing) FH100D (thin-wall tubing) FH100DX (thick-wall tubing)

Catalog number MK-77722-00 MK-77722-02 MK-77722-10 MK-77722-12Performance Number of channels 1 1 1 1Flow capacity (mL/min) 0.5 to 3000 14 to 4000 0.5 to 3000 14 to 4000rpm 4 to 400 4 to 400 Reversible Yes Yes

External control – input 4 to 20 mA; 0 to 10 V; remote/local; direction (CW/CCW); start/stop

0 to 20 mA, 4 to 20 mA, or 0 to 10V (scalable); remote/local; direction (CW/CCW); start/stop; PRIME via contact closure

External control – output — 4 to 20 mA or 0 to 10 V Motor running logic — N.O. or N.C. (1 A @ 24 V) Tachometer output — 5V, TTL pulsePump open lockout or door sensor Yes YesElectrical Voltage (50/60 Hz) 90 to 130 or 160 to 260 VAC; single phase, auto selected 90 to 130 or 160 to 260 VAC; single phase, auto selectedCurrent 1.6 A @ 115 VAC; 1.9 A @ 230 VAC 1.6 A @ 115 VAC; 1.9 A @ 230 VACMotor type PMDC PMDCMotor size 1⁄10 hp (75 watts) 1⁄10 hp (75 watts)Phase control Phase controlled Phase controlledDisplay 7-segment, 3-digit, blue LED; displays rpm Multiline LCD, displays all operational parametersSpeed regulation (accuracy) ±0.25% ±0.25% full-scaleSpeed resolution (repeatability) 1 rpm 0.1 rpmPhysical Operating temperature 0 to 40ºC (32 to 104ºF)Storage temperature –25 to 65ºC (–13 to 149ºF)Materials of construction Housing: ABS; Pump head: GF Nylon, Delrin® acetal, stainless steel, cold-rolled steel, Buna N, polycarbonateIP rating IP31Controller dimensions (L × W × H) 31.7 x 27.9 x 15.2 cm (121⁄2" x 11" x 6")Shipping weight 7 kg (15 lb)

MK-07528-80 Handheld remote controller for models FH100 and FH100X. DB9; for on/off control; route tubing through handle for filling applications

See pages 10–12 for tubing performance and selection.

MK-07523-97 Handheld remote controller for models FH100D and FH100DX. DB25; for on/off control; route tubing through handle for dispensing applications

8 ColeParmer.com

FH100M Multichannel Pumps

Pump fluid in multiple channels, accuratelyCatalyst FH100M series peristaltic pumps provide multichannel pumping with the accuracy of flow control and broad flow range to efficiently service most pumping applications, including bioassays, electrophoresis, chromatography, and pH control.

With flow ranges from 1.2 µL/min to 760 mL/min and three modes of operation—flow, timed flow, and programmable cycle dispensing—FH100M multichannel pumps can save considerable time and resources while greatly improving process efficiency.

Featuring remote control of speed, pumping direction, and start/stop/purge, these pumps are available with a wide range of interchangeable multichannel pump heads, drives, and tubing and can deliver up to 12 channels simultaneously. A configured FH100M pump system consists of a pump head, drive, and cartridges.

ColeParmer.com 9

Easy maintenance - Cartridge design provides fast tubing changes, and

eliminates hardware in other multichannel designs

- Rugged motor and controls ensure long-term reliable operation

- Contamination-free pumping—the fluid contacts only the tubing material

Simple to use - Programmable in seven languages—provides easy

set-up in almost any global location

- Universal voltage and frequency capability allows operation world-wide—IEC320 socket and cord/plug set provided

- Quick-start guide included for fast start-up

Specifications & Ordering Information

FH100M

See pages 10–12 for tubing performance and selection.

Catalyst model FH100M 4/6 FH100M 4/8 FH100M 8/3 FH100M 8/4 FH100M 12/6 FH100M 12/8

Catalog number MK-77724-00 MK-77724-02 MK-77724-04 MK-77724-06 MK-77724-08 MK-77724-10Max number of channels 4 4 8 8 12 12Number of rollers 6 8 3 4 6 8Number of cartridges included Small — 4 — 8 — 12 Large 2 — 4 — 6 —Performance Flow capacity (mL/min) 0.21 to 280 0.013 to 67.0 0.22 to 530 0.02 to 100 0.033 to 56 0.002 to 14.0rpm 4 to 200 0.8 to 80Reversible Yes YesExternal control – input 0 to 20 mA, 4 to 20 mA, or 0 to 10V (scalable); remote/local; direction (CW/CCW); start/stop; PRIME via contact closureExternal control – output 4 to 20 mA or 0 to 10 V Motor running logic N.O. or N.C. (1 A @ 24 VAC) Tachometer output 5V, TTL pulseElectrical Voltage (50/60 Hz) 90 to 260 VAC; auto selectedCurrent 1.6 A @ 115 VAC; 1.9 A @ 230 VACMotor type PMDCMotor size 1⁄10 hp (75 watts)Phase control Phase controlledDisplay Multiline LCD, displays all operational parametersSpeed regulation (accuracy) ±0.25% full-scaleSpeed resolution (repeatability) ±0.1 rpm at 4 to 400 rpmPhysical Operating temperature 0 to 40ºC (32 to 104ºF)Storage temperature –25 to 65ºC (–13 to 149ºF)

Materials of construction Housing: ABS; Pump head: polysulfone, stainless steel, anodized aluminum, Rulon, Buna N; Cartridge: polycarbonate, GF nylon, anodized aluminum knob

IP rating IP31Controller dimensions (L × W × H) 31.7 x 27.9 x 15.2 cm (121⁄2" x 11" x 6")Shipping weight 7 kg (15 lb)

Diverse performance range - Three modes of operation—flow, timed flow, and

programmable cycle dispensing

- Lower pulsation flow and higher accuracy at low volumes and low flow rates

- High repeatability on all channels

- Cartridges provide defined and repeatable occlusion conditions

- Available in 4, 8, or 12 channel models (2, 4, and 6 channels when using the large cartridges)

- Capable of accurate, metered, parallel flows with difficult or multiphase fluids

Ergonomic design - Digital display of pump speed or flow rate or

number of dispense cycles

- Adjustable occlusion setting provides flow and pressure performance, and optimizes tubing life

- Valveless replacement alternative to diaphragm and piston pumps

MK-77724-60 Cartridge, small; for FH100M 8/3 and 8/4MK-77724-65 Cartridge, large; for FH100M 8/3 and 8/4

MK-77724-70 Cartridge, small; for FH100M 4/6, 4/8, 12/6 and 12/8MK-77724-75 Cartridge, large; for FH100M 4/6, 4/8, 12/6 and 12/8

ColeParmer.com10

Pump Tubing

Tubing formulations to meet the needs of your applicationCatalyst high-precision peristaltic pump tubing is manufactured to exacting specifications to optimize accuracy, repeatability, and to provide enhanced tubing life. This tubing has been tested and quality assured to operate in Catalyst peristaltic pumps.

Pump tubing formulation Advantages

Application suitability†

Gas permeability Sterilization

Acid

s

Alka

lies

Orga

nic

solv

ents

Pres

sure

Vacu

um

Visc

ous

fluid

sSt

erile

flu

ids

Silicone(platinum-cured)

Ultra-smooth inner surface minimizes particle entrapment.No leachable additives, DOP, or plasticizers; phthalate and latex-free; odorless and nontoxic, fungus-resistant.No taste imparted to transported fluids.Weather, ozone, corona, and radiation resistant.Translucent, clear to light amber.

N/R N/R N/R F G F E

CO2: 25,147H2: —O2: 4715N2: 2284

Sterilize by EtO, autoclave, or gamma radiation. Temperature range:

Static: –50 to 230°C (–58 to 446°F) Dynamic (pumping): –40 to 100°C (–40 to 212°F)

PharMed® BPTGreat for tissue and cell work—nontoxic and nonhemolytic.Long service life (up to 10,000 hrs); reduces tubing costs and pump downtime.Opaque to UV and visible light to protect light-sensitive fluids.Low gas permeability.Opaque, beige

G G N/R G G E E

CO2: 1200H2: —O2: 200N2: 80

Sterilize by EtO, autoclave, or gamma radiation up to 2.5 Mrad.Temperature range:

Static: –51 to 132°C (–60 to 270°F) Dynamic (pumping): –20 to 100°C (–4 to 212°F)

Norprene® Food(A 60 F) Longest life, good flow consistency.

Heat and ozone resistant.Good resistance to acids/alkalies.Heat sealable, nonaging, and nonoxidizing.High dielectric constant.Opaque, beige.

G G N/R E E E G

CO2: 1200H2: —O2: 200N2: 80

Sterilize by EtO, autoclave, or gamma irradiation.Temperature range:

Static: –59 to 132°C (–60 to 270°F) Dynamic (pumping): –20 to 100°C (–4 to 212°F)

Tygon® E-Food(B-44-4X)

Bore is extremely smooth (better than most stainless steels)Nontoxic, will not affect taste or odor, and clear for CIP and flow verification. Excellent nonwetting properties permit flush cleaning and complete drainage. High dielectric constant.Transparent, clear.

G G N/R G G E F

CO2: 270H2: 97O2: 60N2: 30

Sterilize by EtO or autoclave.

Temperature range: Static: –36 to 74°C (–32 to 165°F) Dynamic (pumping): 0 to 40°C (32 to 104°F)

†E = Excellent, G = Good, F = Fair, P = Poor, N/R = not recommended

ColeParmer.com

Tubing for Catalyst FH100, FH100X, FH100D, and FH100DX PumpsDescription 1.6 mm (thin-wall) tubing for FH100 and FH100D pumps 2.4 mm (thick-wall) tubing for FH100X and FH100DX pumpsInner diameter 0.8 mm 1.6 mm 3.2 mm 4.8 mm 6.4 mm 8.0 mm 4.8 mm 6.4 mm 8 mm 9.5 mmHose barb size 1⁄32" 1⁄16" 1⁄8" 3⁄16" 1⁄4" 5⁄16" 3⁄16" 1⁄4" 5⁄16" 3⁄8"Flow (mL/min) 0.5 to 40 2.0 to 150 6.5 to 550 16 to 1200 24 to 2000 36 to 3000 14 to 1200 24 to 2000 36 to 3000 48 to 4000General-purpose tubing coils; 15 m (49.2 ft)Silicone, platinum-cured — MK-97000-71 MK-97000-72 MK-97000-73 MK-97000-74 MK-97000-75 MK-97000-76 MK-97000-77 MK-97000-78 MK-97000-79

PharMed® BPT MK-97000-20 MK-97000-21 MK-97000-22 MK-97000-23 MK-97000-24 MK-97000-25 — — — —Norprene® Food — MK-97000-41 MK-97000-42 MK-97000-43 MK-97000-44 MK-97000-45 — — — —Tygon® E-Food — MK-97000-61 MK-97000-62 MK-97000-63 MK-97000-64 MK-97000-65 — MK-97000-67 MK-97000-68 MK-97000-69Precision tubing links; pack of 12

Silicone, platinum-cured MK-97001-70 MK-97001-71 MK-97001-72 MK-97001-73 MK-97001-74 MK-97001-75 MK-97001-76 MK-97001-77 MK-97001-78 MK-97001-79

PharMed® BPT MK-97001-20 MK-97001-21 MK-97001-22 MK-97001-23 MK-97001-24 MK-97001-25 MK-97001-26 MK-97001-27 MK-97001-28 MK-97001-29Norprene® Food MK-97001-40 MK-97001-41 MK-97001-42 MK-97001-43 MK-97001-44 MK-97001-45 MK-97001-46 MK-97001-47 MK-97001-48 MK-97001-49Tygon® E-Food MK-97001-60 MK-97001-61 MK-97001-62 MK-97001-63 MK-97001-64 MK-97001-65 MK-97001-66 MK-97001-67 MK-97001-68 MK-97001-69

Two-Stop Tubing Links for Catalyst FH100M Pumps—for small cartridges

Two-Stop Tubing Links for Catalyst FH100M Pumps—for large cartridges

With pump model Number of rollers

Flow rates (mL/min) for indicated pump model and tubing ID0.8 mm ID 1.6 mm ID 3.2 mm ID 4.8 mm ID 6.4 mm ID

FH100M 4/6 6 0.21 to 10.0 0.6 to 30.0 2.2 to 110 4.0 to 200 5.6 to 280FH100M 8/3 3 0.22 to 11.0 0.84 to 42.0 3.2 to 160 6.8 to 340 10.6 to 530FH100M 12/6 6 0.033 to 1.9 0.012 to 6.6 0.35 to 20.0 0.70 to 40.0 0.98 to 56.0Silicone, platinum-cured (6/pk) MK-97100-12 MK-97100-13 MK-97100-16 MK-97100-17 MK-97100-18PharMed® BPT (12/pk) MK-97100-22 MK-97100-23 MK-97100-26 MK-97100-27 MK-97100-28Norprene® Food (12/pk) MK-97100-42 MK-97100-43 MK-97100-46 MK-97100-47 MK-97100-48Tygon® E-Food (12/pk) MK-97100-62 MK-97100-63 MK-97100-66 MK-97100-67 MK-97100-68

With pump model Number of rollers

Flow rates (mL/min) for indicated pump model and tubing ID0.19 mm ID 0.25 mm ID 0.89 mm ID 1.42 mm ID 2.06 mm ID 2.79 mm ID

FH100M 4/8 8 0.013 to 0.60 0.018 to 0.91 0.18 to 9.1 0.04 to 20.0 0.88 to 44.0 1.38 to 67.0FH100M 8/4 4 0.02 to 0.85 0.03 to 1.0 0.26 to 13.0 0.53 to 26.0 1.14 to 57.0 2.06 to 100.0FH100M 12/8 8 0.002 to 0.11 0.004 to 0.20 0.03 to 1.9 0.07 to 4.3 0.14 to 8.6 0.25 to 14.0Silicone, platinum-cured (6/pk) MK-97200-02 MK-97200-03 MK-97200-04 MK-97200-06 MK-97200-07 MK-97200-08PharMed® BPT (12/pk) MK-97200-22 MK-97200-23 MK-97200-24 MK-97200-26 MK-97200-27 MK-97200-28Tygon® E-Food (12/pk) MK-97200-62 MK-97200-63 MK-97200-64 MK-97200-66 MK-97200-67 MK-97200-68

Tubing ID 0.19 mm ID 0.25 mm ID 0.89 mm ID 1.42 mm ID 2.06 mm ID 2.79 mm IDFlow (mL/min) at 1.7 to 10 rpm 0.002 to 0.013 0.004 to 0.022 0.041 to 0.25 0.09 to 0.57 0.18 to 1.05 0.25 to 1.65Flow (mL/min) at 13 to 80 rpm 0.017 to 0.10 0.03 to 0.18 0.33 to 2.0 0.75 to 4.5 1.4 to 8.5 1.8 to 11.0Flow (mL/min) at 50 to 300 rpm 0.07 to 0.43 0.12 to 0.73 1.4 to 8.3 3.2 to 19 5.9 to 35.2 8.3 to 50Silicone, platinum-cured (15 m/49.2 ft) — — MK-97200-14 MK-97200-16 MK-97200-17 MK-97200-18PharMed® BPT (30 m/98.4 ft) — MK-97200-33 MK-97200-34 MK-97200-36 MK-97200-37 MK-97200-38Tygon® E-Food (30 m/98.4 ft) MK-97200-72 MK-97200-73 MK-97200-74 MK-97200-76 MK-97200-77 MK-97200-78

Tubing Coils for Catalyst FH10 Pumps

Two-Stop Tubing Links for Catalyst FH15 and FH30 PumpsTubing ID 0.8 mm ID 1.6 mm ID 3.2 mm ID 4.8 mm IDFlow (mL/min) with FH15 0.8 to 4.0 2.8 to 14 11 to 54 21 to 105Flow (mL/min) with FH30 0.8 to 4.0 2.8 to 14 Not recommendedSilicone, platinum-cured (6/pk) MK-97100-12 MK-97100-13 MK-97100-16 MK-97100-17PharMed® BPT (12/pk) MK-97100-22 MK-97100-23 MK-97100-26 MK-97100-27Norprene® Food (12/pk) MK-97100-42 MK-97100-43 MK-97100-46 MK-97100-47Tygon® E-Food (12/pk) MK-97100-62 MK-97100-63 MK-97100-66 MK-97100-67

11

In the United KingdomFree phone: 0500-345-300Phone: 020-8574-7556Fax: 020-8574-7543www.coleparmer.co.uk

International customers Call 847-549-7600 to reach our International Sales Department or contact your local dealer.

In Canada Call toll-free 800-363-5900Phone: 514-355-6100Fax: 514-355-7119www.coleparmer.ca

In IndiaToll-free: 1-800-266-1244Phone: 91-22-6139-4444Fax: 91-22-6139-4422www.coleparmer.in

In the U.S. 625 E. Bunker CourtVernon Hills, IL 60061Call toll-free 800-323-4340Phone: 847-549-7600Fax: 847-247-2929www.coleparmer.com

U.S./Canada Resellers Call toll-free 800-637-3739Phone: 847-381-7050

FREE TECHNICAL APPLICATIONS ASSISTANCE!

Potassium carbonate A — APotassium chlorate B B BPotassium hydroxide (med) A B BPotassium hydroxide (conc) A C DPotassium iodide A — APropanol (propyl alcohol) C A DPyridine C D DSilicone fluids A C BSilicone oils C C BSilver nitrate A A ASoap solutions B A ASodium bicarbonate A A ASodium bisulfate A — ASodium bisulfite A A ASodium borate A A ASodium carbonate A A ASodium chlorate A C ASodium chloride A A ASodium ferrocyanide A — BSodium hydrosulfite B — ASodium hydroxide (dil) A A ASodium hydroxide, 25% A B CSodium hydroxide (conc) — — CSodium hypochlorite, <5% A B ASodium hypochlorite, >5% A B ASodium nitrate A D ASodium silicate A A ASodium sulfide A A ASodium sulfite A A ASteam, up to 40 psi C A DStearic acid C B AStyrene D D DSulfuric acid (dil) A D ASulfuric acid (med) A D ASulfuric acid (conc) D D DSulfurous acid A D ATannic acid B B CTanning liquors A — ATartaric acid A A ATin salts A B AToluene (toluol) D D DTrichloroacetic acid B D ATrichloroethylene D D DTrisodium phosphate A — ATurpentine D D DUrea A B AUric acid A — AWater, fresh A B AWater, salt A A AXylene D D DZinc chloride A A A

Chlorobenzene D D DChlorobromomethane B D DChloroform C D DChlorosulfonic acid D D DChromic acid, 30% A C CChromium salts A — ACopper salts A A ACresol D D BCyclohexane D D DCyclohexanone D D DDiacetone alcohol A B DDimethyl formamide B B DDimethyl Sulfoxide (DMSO) A — —Essential oils D C DEthanol (ethyl alcohol) C A DEther C D DEthyl acetate B B DEthyl bromide D D DEthyl chloride C D DEthylamine D C DEthylene chlorohydrin A C DEthylene dichloride C D DEthylene glycol A A AEthylene oxide A D AFatty acids C C BFerric chloride A B AFerric sulfate A B AFerrous chloride A C AFerrous sulfate A C AFluoboric acid D A CFluoroborate salts A — AFluosilicic acid C D AFormaldehyde D B DFormic acid, 25% A B BFreon® TMS D — DGasoline, high-aromatic D D DGasoline, nonaromatic D D DGlucose A A AGlue, P.V.A. A A AGlycerin A A AHydriodic acid D — AHydrobromic acid, 30% D D BHydrochloric acid (dil) A D AHydrochloric acid (med) B D CHydrochloric acid (conc) — D CHydrocyanic acid A C AHydrocyanic acid, gas, 10% A C AHydrofluoric acid, 50% D D C

4043.1

FluidTubing formulation PN S T

Acetaldehyde D B DAcetate LMW A — DAcetic acid <5% A A AAcetic acid >5% A A BAcetic anhydride A C DAcetone D C DAcetonitrile B — DAcetyl bromide C — DAcetyl chloride C C DAir A A AAliphatic hydrocarbons D — DAluminum chloride A B AAluminum sulfate A A AAlums A A AAmmonia, gas / liquid A C BAmmonium acetate A — AAmmonium carbonate A C AAmmonium chloride A C AAmmonium hydroxide A A BAmmonium nitrate A C AAmmonium phosphate A A AAmmonium sulfate A A AAmyl acetate B D DAmyl alcohol D D DAmyl chloride C D DAniline C D DAniline hydrochloride C D DAqua regia (80% HCl, 20% H) D

DA

D——

DDA

Aromatic hydrocarbonsArsenic saltsBarium salts A A ABenzaldehyde D B DBenzenesulfonic acid D D DBleaching liquors A B ABoric acid A A ABromine D D DButane A D AButanol (butyl alcohol) D B DButyl acetate B D DButyric acid B D DCalcium oxide A A ACalcium salts A B ACarbon bisulfide D D DCarbon dioxide A B ACarbon tetrachloride D D DChlorine, dry C D AChlorine, wet D D CChloroacetic acid B — A

FluidTubing formulation PN S T

Hydrofluoric acid, 75% — D DHydrogen peroxide (dil) A A AHydrogen peroxide, 90% B B DHypochlorous acid A D AIodine solutions A C AIodoform — — —Kerosene D D DKetones D — DLacquer solvents B D DLactic acid, 3–10% A A ALead acetate A D ALinseed oil C A DLithium hydroxide B D AMagnesium chloride A A AMagnesium sulfate A A AMalic acid A B AManganese salts A B AMercury salts A — AMethane A D AMethanol (methyl alcohol) A A CMethyl chloride C D DMethyl ethyl ketone (MEK) D D DMixed acid (40% H2SO4, 15% HNO3) B — B

Molybdenum disulfide — — —Monoethanolamine C B DNaphtha D D DNatural gas A A ANickel salts A A ANitric acid (dil) A B ANitric acid (med) A C CNitric acid (conc) D D DNitrobenzene D D DNitrogen oxides A D ANitrous acid A — AOils, animal C B DOils, mineral D B COils, vegetable C B DOleic acid C D DOxalic acid, cold B B COxygen, gas A B APalmitic acid, 100% in ether C D DPerchloric acid A D CPerchloroethylene C D DPhenol (carbolic acid) A D BPhosphoric acid, 50% A C CPhthalic acid A B DPlating solutions A D APolyglycol B A A

Pump Tubing Compatability Charts

FluidTubing formulation PN S T

FluidTubing formulation PN S T

DangerEven if tubing passes the immersion test, variations in temperature, pressure, or concentration may cause tubing failure.

SERIOUS INJURY MAY RESULT.

Use suitable guards and/or personal protection when pumping chemicals.

s! WarningThe information in these tables has been supplied to Cole-Parmer by the tubing manufacturers and is to be used ONLY as a guide to select your tubing. Always test fluids and tubing before use. Cole-Parmer does not warrant (neither express or implied) that the information in these tables is accurate or complete or that any material is suitable for any purpose.

s! CautionThe ratings in the charts do not reflect the extent to which extraction or leaching may occur or the extent to which fluids may undergo any physical changes in properties or composition as a result of coming into contact with the wetted materials. it is the user's responsibility to test and ensure the suitability of wetted materials for all intended users, including establishing the compatibility of any fluid with the material through which it is coming into contact.

s!

RatingsA: No effect; little noticeable change

B: Minor effect; slight corrosion or discoloration

C: Moderate effect; not recommended for continuous use; softening, loss of strength, swelling and/or shrinkage

D: Severe effect; not recommended for use; severe softening, swelling and/or shrinkage

— No data available

Tubing formulationsPN: PharMed® BPT, Norprene® Food

S: Silicone (platinum-cured)

T: Tygon® E-Food