get ready · 2018-08-27 · note: avoid scars, moles, stretch marks, lumps, and insulin injection...
TRANSCRIPT
XXXXXXXXXXX
YYYY-MM-DD
XXXCODE
CODE
Abbott Diabetes Care Inc. 1360 South Loop Road, Alameda, CA 94502 A
RT36504 R
ev. 1
08/1
5
XXXXXXXXXXX
XXX
YYYY-MM-DD
STEP 3
STEP 6
STEP 9
Get
Rea
dy
Ap
ply
Sen
sor
Pre
par
e Se
nso
r A
pp
lica
tor
Clean site with alcohol wipe. Allow site to dry before proceeding.
Peel lid completely off Sensor Pack. Unscrew cap from Sensor Applicator.
CAUTION: Sensor codes must match on Sensor Pack and Sensor Applicator or glucose readings will be incorrect.
Select site on back of upper arm.Do not use other sites as these are not approved and may result in inaccurate glucose readings.Note: Avoid scars, moles, stretch marks, lumps, and insulin injection sites. To prevent skin irritation, rotate sites between applications.
Refer to your User’s Manual for full system instructions and information.
Touchscreen
Home ButtonUSB Port
Sensor Pack
Reader
Place Sensor Applicator over site and push down firmly to apply Sensor.
CAUTION: Do not push down on Sensor Applicator until placed over prepared site to prevent unintended results or injury.
Make sure Sensor is secure. Discard used Sensor Applicator and Sensor Pack according to local regulations.
Gently pull Sensor Applicator away from your body.
STEP 1
STEP 4
STEP 7
STEP 2
STEP 5
STEP 8
Line up dark mark on Sensor Applicator with dark mark on Sensor Pack. On a hard surface, press down firmly on Sensor Applicator until it comes to a stop.
Sensor Applicator is ready to apply Sensor.
CAUTION: Sensor Applicator now contains a needle. Do not touch inside Sensor Applicator or put it back into Sensor Pack.
Lift Sensor Applicator out of Sensor Pack.
Lid Cap
Sensor
SensorApplicator
Codes on labels must match
● 1 Assemble and Apply Sensor to the back of your upper arm
● 2 Start new Sensor with Reader
Wait 60 minutes for start-up
You can check your glucose whenever you want for up to 14 days
FLASH GLUCOSE MONITORING SYSTEM
Quick Start Guide for FreeStyle Libre 14 day Reader
Setup Overview
● 1 Assemble and Apply Sensor to the back of your upper arm
No Active Sensor
10:23pm
Start NewSensor
ReviewHistory
350
250
150
50
236 mgdL
6am 10am 2pm
Glucose Going High
Check Glucose
Scan Sensor to checkglucose.
10:23pm
CheckGlucose
ReviewHistory
Ends in 14 days
Daily Patterns
Time In Target
Low Glucose Events
Sensor Usage
Logbook
Daily Graph
Average Glucose
Review History
1 / 2
minutes
OKNew SensorStarting Up
60 Sensor can be used in:
350
250
150
50
350
250
150
50
82 mgdL
mg/dL
Food Note
TargetGlucose
Range
Rapid-ActingInsulin Note
CurrentGlucose
Time
MessageTouch for more information
Check Blood GlucoseWhen you see this
symbol, do a blood glucose test before making treatment
decisions
Add NotesTouch to add notes to glucose reading
Current GlucoseGlucose from your latest scan
Glucose Trend ArrowDirection your glucose is goingGlucose Graph
Graph of your current and stored glucose readingsArrow What it means
Glucose rising quickly
Glucose rising
Glucose changing slowly
Glucose falling
Glucose falling quickly
Glucose Going Low
2pm 6pm 10pm
2pm 6pm 10pm
Press Home Button to turn on Reader.Note: If using Reader for the first time, follow the prompts to set date, time, and target glucose range.
Touch Start New Sensor. Hold Reader within 1.5 inches (4 cm) of Sensor to scan it. Sensor can be used to check your glucose after 60 minutes.
Press Home Button to turn on Reader. Press Home Button again to go to Home Screen.
Touch Review History. Select option to view.
Hold Reader within 1.5 inches (4 cm) of Sensor to scan it.
Press Home Button to turn on Reader. Reader shows your glucose readings.
Understanding your glucose readings
If you have followed the instructions described in the User’s Manual and are still having difficulty setting up your System or if you are experiencing symptoms that are not consistent with your glucose monitoring, contact your health care professional.
STEP 3
STEP 3
STEP 3
STEP 1
STEP 1
STEP 1
STEP 2
STEP 2
STEP 2
Manufacturer
Consult instructions for use
WARNING: When you see the symbol, you must check your blood glucose with a blood glucose meter before making any treatment decisions. Sensor readings may not accurately reflect blood glucose levels.
FreeStyle, Libre, and related brand marks are trademarks of Abbott Diabetes Care Inc. in various jurisdictions. ©2018 Abbott ART39768-001 Rev. A 07/18
● 2 Start new Sensor with Reader
● 3 Check your glucose
● 4 Review your history