g.f. gordini srl

ATTACHMENTS FOR

OPERATING MACHINERY

G.F. Gordini srl Via E. Mattei, 4

48012 Bagnacavallo (RA) - Italy tel. +39 0545 62712 fax +39 0545 62140

[email protected]

ATTACHMENTS FOR

OPERATING MACHINERY

ATTACHMENTS FOR OPERATING MACHINERY

RAVENNA

BAGNACAVALLO

G.F. Gordini designs and realizes a range of more than 20 attachments in 100 different versions, able to execute any kind of work, applicable to Skid-Steer Loader, Wheel Loader, Backhoe Loader and Mini Excavator.

Quality and reliability is the philosophy of our company that since 25 years operates in the fi eld.

INDUSTRIAL POLISHING BRUSH 2ANGLE POLISHING BRUSH 3POLISHING BRUSH WITH HARVEST BUCKET SP/SPS 4POLISHING BRUSH WITH HARVEST BUCKET SH/SHS 5POLISHING BRUSH WITH HARVEST BUCKET SPR 6ASPHALT PLANER 7PALLET FORK 8SIDESHIFT BACKHOE 9SILENCED HYDRAULIC HAMMER 10MIXER BUCKET 11GRADER 12TILTDOZER BLADE 13DOZER BLADE 14MULTIFUNCTION BUCKET 4 in 1 15HIGH TIP BUCKET 16SNOW BLOWER 17SNOW BLADE 18AUGER 19FRONTAL BUSH CUTTER 20MULCHING HEAD 21INDUSTRIAL PLIERS 22HEAVY DUTY PLIERS 23AGRICULTURAL PLIERS 24

INDEX

2

Model SI 1200 SI 1500 SI 1800 SI 2100 SI 2200 SI 2400

Working width mm 1200 1500 1800 2100 2200 2400

Total width mm 1345 1645 1945 2245 2400 2600

Oil fl ow min÷max lt/min 25÷50 25÷60 40÷80 40÷80 70÷120 70÷120

Oil pressure min÷max bar 120÷200 120÷200 160÷200 160÷200 200÷250 200÷250

Weight kg 350 400 460 490 740 800

Bucket capacity lt 230 290 350 410 530 580

Polishing brush suitable to clean and collect material along all internal and external surfaces with polypropylene brush.

Free swivel wheels 360°.

Waste bin with hydraulic cylinder for unloading.

Simple connection to a large machines variety (skid-steer loader, articulate loader, forklift, telescopic handler, etc.)

Total hydraulic operating, including waste bin opening.

Excellent sweeping quality; can adapt the brush to ground irregularities through its moving system of connection to machine.

Watering system with water tank, electrical pump 12 V and sprays to pulverizing water (option).

INDUSTRIALPOLISHING BRUSH

3

Polishing brush suitable to sweep material on right and left side with polypropylene brushes.

+/- 30° mechanical or hydraulic (option) drive angulation.

Moving system of roller brush.

ANGLEPOLISHING BRUSH

Model SA 155 SA 180 SA 210

Working width mm 1550 1800 2100

Total width mm 1690 1940 2240

Oil fl ow min÷max lt/min 30÷40 30÷50 50÷90

Oil pressure min÷max bar 160-200 160-200 180-240

Weight kg 275 310 450

4

Polishing brush with polypropylene brushes suitable to clean and collect material in building sites and to scrape mud with cutting edge.

Material harvest bucket.

Frontal and side protection of roller brush with rubber bands.

Model SPS with direct hydraulic motor on brushes shaft; excludes the usury of driving organs.

Falling and pressure watering kit with water tank 100 lt capacity (option) (not available for SP 110).

POLISHING BRUSHWITH HARVEST BUCKET SP/SPS

SP/SPS

Mode SP 110 125 140 155 168 180 210

Working width mm 1100 1250 1400 1550 1680 1800 2100

Total width mm 1210 1360 1510 1660 1790 1910 2210

Oil fl ow min÷max lt/min 20÷30 25÷35 30÷40 30÷40 30÷40 30÷50 50÷90

Oil pressure min÷max bar 140÷175 160÷200 160÷200 160÷200 160÷200 160÷200 180÷240

Weight kg 215 275 310 350 375 395 485

Bucket capacity lt 195 345 390 435 470 505 580

5




4 steel wheels under the bucket to avoid bottom bucket wearing.

Model SHS with direct hydraulic motor on brushes shaft; excludes the usury of driving organs.

Falling and pressure watering kit with water tank 100 lt capacity (option).

POLISHING BRUSHWITH HARVEST BUCKET SH/SHS

SH/SHS

Model 125 140 155 168 180 210

Working width mm 1250 1400 1550 1680 1800 2100

Total width mm 1360 1510 1660 1790 1910 2210



Weight kg 310 345 385 410 430 525

Bucket capacity lt 345 390 435 470 505 580

6




Anti-wear reversible bolted blade.

Reinforced bottom bucket in HARDOX.

Falling and pressure watering kit with water tank 100 lt capacity (option).

POLISHING BRUSHWITH HARVEST BUCKET SPR

Model SPR 200 SPR 220 SPR 240

Working width mm 2000 2200 2400

Total width mm 2110 2340 2570


Oil pressure min÷max bar 190÷250 190÷250 200÷300

Weight kg 600 730 850

7

Model CP 400 CP 500 CPX 500 CPX 600

Working width mm 400 500 500 600

Working depth mm 0÷150 0÷150 0÷150 0÷170

Oil fl ow min÷max lt/min 90÷120 100÷120 120÷160 120÷160

Oil pressure min÷max bar 170÷250 170÷250 170÷250 170÷250

Weight kg 710 740 800 800

Side-shift mm 650 650 650 650

Planer suitable to mill asphalt and concrete with high fl ow hydraulic systems for Skid-Steer Loader.

Mechanical or hydraulic depth adjustment with support sledges independent on 2 sides.

Strong steel wheels on frame to increase stability.

Hydraulic side translation for line wall work.

20° transverse mechanical inclination.

ASPHALTPLANER

8

Pallet Fork for Skid-Steer Loader.Frame complete of no-overloading protection grate.N. 2 manually side-shift forks.

Pallet Fork for Backhoe Loader and Wheel Loader.Fork with frame.N. 2 manually side-shift forks.

Lifting capacity indicated refers to load positioned in a balanced way on both forks with center of gravity 500 mm distant.

PALLETFORK

Pallet Fork forSkid-Steer Loader

Skid - Steer Loader

Model PF 100 PF 120 PF 130 PF 150 PF 250 PF 450

Lifting capacity kg 1000 1000 1800 2500 2500 4500

Weight kg 120 145 185 230 260 380

Fork section mm 80x30 80x30 100x35 100x40 100x40 120x50

Fork lenght mm 1000 1000 1100 1200 1200 1200

Frame width mm 1000 1200 1300 1500 1500 1500

Frame height mm 900 950 950 950 540 540

Pallet Fork for Backhoe Loaderand Wheel Loader

Backhoe Loader andWheel Loader

9

Backhoe with side shift frame at hydraulic clamp for line wall digging.

Independent hydraulic stabilizers.

Device to Skid-Steer Loader with inside cab controls.

Standard digging bucket.

Auxiliary hydraulic system for hammer (option).

SIDESHIFTBACKHOE

Model P250 P280 P320

Max digging depth mm 2450 2800 3250


Oil pressure setting bar 160 165 165

Weight kg 510 600 820

Standard bucket width mm 300 300 300

10

Silenced hydraulic hammer with completely closed structure.

High back-pressure tolerated on the unloading circuit, with possibility of application on Skid-Steer Loader, Mini-Excavator, Backhoe Loader, without stop problems.

Smooth hole plate for coupling system fi xing to Skid-Steer Loader frame and saddle for excavator/backhoe.

SILENCED HYDRAULIC HAMMER

Model MH 50 S MH 90 S MH 160 S MH 250 S MH 350 S

Oil fl ow min÷max lt/min 15÷20 20÷40 30÷50 40÷60 55÷80

Oil pressure min÷max bar 130÷150 80÷120 80÷120 80÷120 80÷120

Back-pressure bar 25 30 25 25 20

Weight kg 60 100 180 250 370

11

Mixer bucket for concrete with blades and bottom in HARDOX.

Alone material loading and unloading by overturning or through the unloading plate located in centre bucket by hydraulic opening.

Front protection grate with opening hinge system for cleaning.

MIXER BUCKET

Model BC 220 BC 270 BC 320 BC 450 BC 650 BC 800

Bucket width mm 1200 1450 1650 1650 1750 2000

Total width mm 1340 1590 1790 1790 1890 2140



Yield lt 220 275 320 450 650 800

Max capacity lt 275 330 400 550 800 960

Empty weight kg 300 350 380 465 710 800

12

Grader suitable to level off land, roads, squares, sport facilities.

It is equipped of blade with right/left inclination, hydraulic rotation and side-shift of blade.

360° free swivel front wheels.

For high precision works it is possible to install a LASER receiver system (option).

GRADER

Model LG 210 LG 270 LG 270 P

Blade width mm 2133 2700 2700


Oil pressure min÷max bar 120÷200 140÷200 140÷200

Weight kg 550 900 900

Electro-valves inclination blade on-off on-off proportional

R/L hydraulic inclination blade 30° 30° 30°

R/L hydraulic rotation blade 35° 40° 40°

Hydraulic side-shift blade ±400 ±450 ±450

13

Blade suitable to level and to heavy earth-moving works, ideal for coupling on track Skid-Steer Loader.

It is equipped of blade with ± 25° hydraulic right and left inclination, ± 8° hydraulic oscillation.

Steel bolted blade wear.

TILTDOZERBLADE

Model LTD 205 LTD 220 LTD 250


Blade height mm 650 650 650

Weight kg 380 430 450

14

Blade suitable to re-burying works, ideal for coupling on wheel Skid-Steer Loader.

It is equipped of blade with ± 25° hydraulic right/left rotation.

Steel blade wear.

DOZERBLADE

Model LD 150 LD 180 LD 210


Blade height mm 530 530 530

Weight kg 170 200 230

15

Hydraulic opening bucket ideal to level, grab, dig, load and unload.

Front and back anti-wear steel blade.

Available with bolted or tip teeth (option).

MULTIFUNCTIONBUCKET 4 in 1

Model BM 125 BM 140 BM 155 BM 168 BM 185 BM 205

Bucket width mm 1250 1400 1550 1680 1850 2050

Weight kg 220 250 275 330 370 420

Max capacity m3 0,23 0,26 0,30 0,37 0,41 0,45

16

Bucket with raised unloading system by hydraulic drive; it increases the machine unloading height about 400 mm.

Anti-wear steel blade.

Available with bolted or tip teeth (option).

HIGH TIPBUCKET

Model BA 140 BA 155 BA 168 BA 185 BA 205

Bucket width mm 1400 1550 1680 1850 2050

Weight kg 220 240 275 320 375

Max capacity m3 0,25 0,28 0,32 0,36 0,40

17

Snow blower at double stage ideal for snow removal of sidewalks, parking, squares and narrows.

Replaceable bolted lower blade.

Discharge chute with 270° hydraulic rotation for jet directing.

Upper defl ector with hydraulic adjustment to set jet distance.

SNOWBLOWER

Model TN 155 TN 185 TNX 155 TNX 185 TNX 210

Working width mm 1550 1850 1550 1850 2100

Total width mm 1580 1880 1580 1880 2130

Oil fl ow min÷max lt/min 45÷60 50÷70 90÷120 110÷130 120÷140

Oil pressure min÷max bar 170÷190 170÷190 190÷220 190÷220 190÷220

Weight kg 350 390 395 435 530

Front height mm 740 740 740 740 860

Helix height mm 355 355 355 355 460

Fan diameter mm 560 560 560 560 610

18

Blade with anti-shock system by spring return.

± 30° right/left hydraulic rotation.

± 8° moving oscillation with spring return to central position for a precise grip also during slope change compared to machine.

Steel bolted blade wear (current).

Vulkollan blade wear suitable for delicate pavements.

SNOWBLADE

Model LN 160 LN 180 LN 210 LN 240 LN 240R LN 270

Blade width mm 1600 1828 2133 2400 2400 2700

Blade height mm 615 615 615 615 650 650

Weight kg 310 330 375 395 510 530

19

Auger head with hexagonal exit shaft for helicoidal drill connection and double oscillating joint.

Suitable to coupling on Skid-Steer Loader, Mini Excavator, Backhoe or Excavator.

Helicoidal drills are with double helix, anti-wear steel bolted edges for medium grounds work (for diameter Ø 150 the anti-wear edge is welded), or with WIDIA edges, for asphalt or crumbly rock work.

AUGER

Model TR 100 TR 180 TR 300 TR 600 TR 1200 TR 1500

Oil fl owmin÷max

lt/min 15÷35 25÷60 60÷100 80÷120 100÷140 130÷170

Oil pressuremin÷max

bar 180÷225 180÷225 200÷300 220÷300 220÷300 280÷350

Weight kg 55 85 120 170 205 260

Max helicoidaldrill

mm Ø 350 Ø 600 Ø 800 Ø 800 Ø 1000 Ø 1000

Max torque daNm 100 180 330 650 1200 1500

20

Model TC 145 TC 160 TC 180 TC 200

Working width mm 1450 1600 1800 2000

Oil fl ow min÷max lt/min 50÷70 70÷90 70÷90 80÷10

Oil pressure min÷max bar 180÷220 180÷220 180÷220 180÷220

Weight kg 610 650 720 800

Hammer type “P” n. 14 14 16 18

Frontal bush cutter suitable to cut grass or shrubs, till 5 - 6 cm diameter.

Right mechanical side-shift (400 mm) frame for side street work.

Back roller support adjustable to change cutting height.

Moving attack plate that allows the roller support to be always in contact with ground.

Side support sledges.

Forged hammer type “P”.

FRONTAL BUSH BUTTER

21

Mulching head suitable to cut grass, reeds, bushes, shrubs and pruning, for Excavator and Backhoe.

Roller support with adjustment possibility of cutting height.

Side support sledges.

MULCHINGHEAD

Model TCM 60 TCM 80 TCS 80 TCS 100 TCE 90 TCE 110 TCR 95 TCR 115 TCR 125

Workingwidth

mm 600 800 800 1000 900 1100 950 1150 1250

Oil fl ow min÷max

lt/min 30-35 30-35 30-35 30-35 45-50 45-50 60-65 60-65 60-65

Oil pressure min÷max

bar 150÷170 150÷170 150÷170 150÷170 180÷200 180÷200 180÷200 180÷200 180÷200

Weight kg 125 140 200 220 300 320 370 390 405

Blade type “Y” 20 28 - - - - - - -

Hammer type “C” - - 10 14 - - - - -

Hammer type “L” - - - - 8 10 - - -

Hammer type “P” - - - - - - 8 10 12

22

Pliers with containment material bucket with low profi le sides ideal for refuse, building and industrial debris collecting.

N. 2 hydraulic independent upper bitings.

INDUSTRIAL PLIERS

Model PI 140 PI 155 PI 168 PI 185 PI 205

Width mm 1400 1550 1680 1850 2050

Weight kg 275 300 320 350 495

Upper teeth n. 4 4 4 4 4

23

Pliers with removable lower spikes of big dimensions for hard works in building, industry and agriculture.

N. 2 hydraulic independent upper bitings.

HEAVY DUTYPLIERS

Model PH 140 PH 155 PH 168 PH 185 PH 205

Wirth mm 1400 1550 1680 1850 2050

Weight kg 370 400 440 490 580

Upper teeth n 4 4 4 4 4

Lower spikes n 9 10 11 12 14

Lenght lower spikes mm 800 800 800 800 850

24

Pliers with removable lower spikes for generic farm works (collecting of manure, straw, brushwood, etc..),

N. 1 hydraulic upper biting.

AGRICULTURALPLIERS

Model PA 125 PA 140 PA 155 PA 168 PA 185

Width mm 1250 1400 1550 1680 1850

Weight kg 195 220 240 260 285

Upper teeth n 4 4 4 4 4

Lower spikes n 8 9 10 10 11

Longth lower spikes mm 800 800 800 800 800

g.f. gordini srl

Documents