The actual fabric is not the same as the robe… the masks fabric is solid black, but the ones produced are cheap and shitty quality fabric.The eye mesh should be solid black and never show your eyes (So please add solid black fabric so the mask can better conceal the eyes.

The strings are supposed to be tied behind the head to tighten the mask.

The robe is sparkly… Not very obvious unless in the light… and its not to sparkly. Mostly just black in dark areas… The sparkle effect is a must on this costume. Glittering the fabric yourself is quite a challenge, but will be incredible to fit the film's version.

The Hood contains of 2 layers of the fabric(double-sided fabric to hide the foam), foam(thin) inserted into the front of hood. Thehood should close the whole neck area(button system). The hood also should not layon the shoulders, it should be stable and nottoo big.

However… not reveled in the film. I do know for a fact something keeps the hood and mask connected. As the button clips being hidden is a solid Idea.

Pull strings (Really just decoration) are under the neck. Simple strings are used.

Ghostface’s robe does have a velcro opening on the chest. The opening is from the neck to belly button. Also could add a button on the neck to close it… The velcro is more necessary for screen accurate rather than actually used to close it.

Every single drape should be 10 inches in width

There are 3 drapes on the arms. 1st goes all the way down to the knees. 2nd is about 4 inches shorter and the 3rd is also 4 about inches shorter than the 2nd one.

Gloves are attached to the sleeves and the wrist is elastic.

The bottom is cut in random triangles from what the photos tell .. The cuts are on the front, back, and sides of the robe.