girls hostel citd
TRANSCRIPT
-
8/6/2019 Girls Hostel Citd
1/74
SCHDEULE OF QUANTITIES
Name of work: : Vertical Extension (3rd floor) at Girls Hostel for CITD at Balanagar,Hyderabad.
ItemNo Description Quantity Unit Rate
1
10.00 cum 2637.40
2
1.50 cum 3579.10
3
18.00 cum 5201.50
4
10 00 4046 25
Providing and laying cement concrete in sunken flooring uptofloor five level excluding the cost of centring and shuttering,finishing 1:5:10 (1 cement :5 fine sand :10 graded stoneagreegate 20mm nominal size)
Providing and laying cement concrete in retaining walls,return walls, walls (any thickness) including attached pilasters,columns, piers, abutments, pillars, posts, struts, buttresses,string or lacing courses, parapets, coping, bed blocks, anchor
blocks, plain window sills, fillets etc.upto floor five levelexcluding the cost of centring, shuttering and finishing.2.1) 1:2:4 (1 Cement : 2 coarse sand : 4 graded stoneaggregate 20 mm nominal size)
Reinforced cement concrete work in walls (any thickness),including attached pilasters, buttresses, plinth and stringcourses, fillets, columns, pillars, piers, abutments, posts andstruts etc. upto floor five level excluding cost of centring,shuttering, finishing and reinforcement3.1) 1:1 1/2 :3 (1 cement : 1 1/2 coarse sand : 3 graded stoneaggregate 20 mm nominal size)
Reinforced cement concrete work in beams, suspendedfloors, roofs having slope upto 15 landings, balconies,
shelves, chajjas, lintels, bands, plain window sills, staircasesand spiral stair cases upto floor five level excluding the cost ofcentring, shuttering, finishing and reinforcement with 1:1.5:3
-
8/6/2019 Girls Hostel Citd
2/74
ItemNo Description Quantity Unit Rate
730.00 mtrs 61.10
8
16000.00 kg 42.70
9
90.00 mtrs 220.00
10
90.00 mtrs 50.00
11
Edges of slabs and breaks in floors and walls.7.1) Under 20 cms wide
Reinforcement for R.C.C. work including straightening,cutting, bending, placing in position and binding all complete.8.1) Thermo-Mechanically Treated bars.
Supplying precast RCC frames for doors of sectional area notless than 60sq.cm in ready to assemble members withmortice tenon dovetailed joints members casted withcontrolled concrete conforming to M 40 grade and havingreinforcement not less than 120kg/cum of concrete includingmaking a provision for fixing required no of MS oxidised butthinges, holds fasts and other fittings for fixing sliding doorbolts, tower bolts and cleats etc., by means of machineablepolymer wonder blocks or MS. galvanised plate complete asper the CPWD Specification and directions of the engineer incharge.
Fixing of precast RCC frames ( precast RCC framedmembers to be supplied free of cost)including assembling the
members for door frames fixing to MS machinary or RCC wallface including providing and fixing six no. holds fasts of MS.Flat 40x5mm and of lenght 40 cm as per frame embedding incement concrete blocks of size 30x10x 15cm of mix 1:3:6 (icement : 3 coarse sand : 6 graded stone aggregate 20mmnominal size ) complete as per specification and the directionof Engineer in charge
Providing and laying in position ready mixed concrete
-
8/6/2019 Girls Hostel Citd
3/74
ItemNo Description Quantity Unit Rate
14
35.00 sqm 1309.40
15
170.00 mtrs 57.90
16
30.00 sqm 1473.50
17
Providing and fixing 16mm thick gang saw cut mirror polished(premoulded and prepolished) machine cut for kitchenplatforms, vanity counters ,window sills , facias and similarlocations of required size of approved shade, colour andtexture laid over 20mm thick base cement mortar 1:4 (1
cement : 4 coarse sand) with joints treated with white cement,mixed with matching pigment, epoxy touch ups, includingrubbing, curing moulding and polishing to edge to give highgloss finish etc. complete at all levels.14.1) Raj Nagar Plain white marble/ Udaipur green marble/Zebra black marble.14.1.1) Area of slab upto 0.50 sqm.
Extra for providing edge moulding to 18mm thick marblestone counters, Vanities etc. including machine polishing toedge to give high gloss finish etc. complete as per designapproved by Engineer-in-Charge15.1) Marble work
Providing and fixing ISI marked flush door shutters confirming
to IS : 2202 (Part I ) decorative type, core of block boardconstruction with frame of 1st class hard wood and wellmatched teak 3 ply veneering with vertical grains or crossbands and face veneers on both faces of shutters(centuryplywoodor or equivalent.16.1) 35 mm thick including ISI marked Stainless Steel butthinges with necessary screws.
Providing and fixing M.S. grills of required pattern in frames of
-
8/6/2019 Girls Hostel Citd
4/74
ItemNo Description Quantity Unit Rate
22.2) 100 mm 16.00 each 35.30
22
16.00 each 19.05
23
40.00 mtrs 353.10
24
Providing and fixing aluminium hanging floor door stopper ISImarked anodised (anodic coating not less than grade AC 10as per IS : 1868) transparent or dyed to required colour andshade with necessary screws etc. complete.
23.1) Single rubber stopper
Providing and fixing factory made P.V.C. door frame of size50x47mm with a wall thickness of 5mm, made out ofextruded 5mm rigid PVC foam sheet mitred at corners andjoined with 2 Nos. of 150mm long brackets of 15x15mm M.S.square tube, the vertical door profiles to be reinforced with19x19mm M.S. square tube of 19 gauge, EPDM rubbergasket weather seal to be provided through out the frame.
The door frame to be fixed to the wall using M.S. screws of65/100mm size complete as per manufacturers specificationand direction of Engineer-in-Charge.
30mm thick factory made panel PVC door shutter consistingof frame made out of M.S. tubes of 19 gauge thickness and
size of 19mm x 19mm for styles and 15x15mm for top &bottom rails. M.S. frame shall have a coat of steel primers ofapproved make and manufacture . M.S. frame covered with5mm thick heat moulded PVC 'C' channel of size 30mmthickness, 70mm width out of which 50mm shall be flat and20mm shall be tapered in 45degree angle on either sideforming styles; and 5mm thick, 95mm wide PVC sheet out ofwhich 75mm shall be flat and 20mm shall be tapered in 45degree on the inner side to form top and bottom rail and115mm wide PVC sheet out of which 75mm shall be flat and20mm shall be tapered on both sides to form lock rail. Top,bottom and lock rails shall be provided either side of the
l 10 (5 2 ) thi k 20 id PVC h t
-
8/6/2019 Girls Hostel Citd
5/74
ItemNo Description Quantity Unit Rate
27
400.00 kg 51.20
28
100.00 sqm 1112.55
29
130.00 sqm 556.60
30
40 00 sqm 598 65
Steel work welded in built up sections/framed work includingcutting hoisting, fixing in position and applying a priming coatof approved steel primer using structural steel etc.as required.28.1) In gratings, frames, guard bar, ladders, railings,brackets, gates & similar works.
Marble stone flooring with 16mm thick marble stone (sampleof marble shall be approved by Engineer-in-charge) ove 20mm (average) thick base of cement mortar 1:4 (1 cement :4coarse sand) laid and jointed with grey cement slurryincluding rubbing and polishing complete with:29.1) Udaipur Green Marble
Providing and fixing Ist quality ceramic glazed tilesconforming to IS : 13753 of minimum thickness 5 mm ofapproved make like NITCO, ORIENT, SOMANY KAJARIA, orequivalent make in all colours, shades except begundy, bottlegreen, black of any size as approved by Engineer-in-Chargein skirting, risers of steps and dados over 12 mm thick bed ofCement Mortar 1:3 (1 cement : 3 Coarse sand) and jointingwith grey cement slurry @ 3.3kg per sqm including pointing in
white cement mixed with pigment of matching shadecomplete.
Providing and laying Ceramic glazed floor tiles 300x300 mm(thickness to be specified by the manufacturer) of 1st qualityconforming to IS : 13755 of NITCO, ORIENT, SOMANY
KAJARIA, or equivalent make in colours such as White, Ivory,Grey, Fume Red Brown, laid on 20 mm thick Cement Mortar1:4 (1 cement : 4 Coarse sand) including pointing the joints
-
8/6/2019 Girls Hostel Citd
6/74
ItemNo Description Quantity Unit Rate
33
9.00 each 134.20
9.00 each 263.10
34
18.00 each 96.90
35
Providing and fixing on wall face unplasticised - PVC mouldedfittings/accessories for unplasticised - Rigid PVC rain waterpipes conforming to IS : 13592 Type A including jointing withseal ring conforming to IS : 5382 leaving 10 mm gap forthermal expansion.(prince company or equivalent)34.1) Bend 87.534.1.1) 110 mm bend
34.2) Shoe (Plain)34.2.1) 110 mm Shoe
Providing and fixing unplasticised -PVC pipe clips of approveddesign to unplasticised - PVC rain water pipes by means of
50x50x50mm hard wood plugs, screwed with M.S. screws ofrequired length including cutting brick work and fixing incement mortar 1:4 (1 cement : 4 coarse sand) and makinggood the wall etc. complete.35.1) 110 mm
Providing and laying integral cement based water proofingtreatment including preparation of surface as required fortreatment of roofs, balconies, terraces etc consisting of
following operations. (a) Applying and grouting a slurry coat ofneat cement using 2.75 kg/sqm. of cement admixed withproprietary water proofing compound conforming to IS. 2645over the RCC slab including cleaning the surface beforetreatment. b) Laying cement concrete using brokenbricks/brick bats 25 mm to 100mm size with 50% of cementmortar 1:5 (1 cement : 5 coarse sand) admixed withproprietary water proofing compound conforming to IS : 2645over 20 mm thick layer of cement mortar of mix 1:5 (1cement :5 coarse sand ) admixed with proprietary water
proofing compound conforming to IS : 2645 to required slopeand treating similarly the adjoining walls upto 300 mm heightincluding rounding of junctions of walls and slabs
-
8/6/2019 Girls Hostel Citd
7/74
ItemNo Description Quantity Unit Rate
39
1500.00 sqm 45.00
40
665.00 cm per metre 1.65
41
500.00 sqm 41.55
42
1000.00 sqm 17.20
43
750.00 sqm 60.10
44
80.00 sqm 75.60
45
Supplying and applying Altek superfine putty (internal) orequivalent having anti-fungal and anti-rusting, agents,manufactured with marble powder of 20 microns and acrylicbinder using spatula in two coats directly over, the cementplastered surface to give an ultra smooth, uniform and evensurface including scrapping of loose particles etc. fromplastered surface and smoothening the surface with sandpaper etc. complete as directed by Engineer-in-charge.
12 mm thick plain cement mortar bands in cement mortar 1:4(1 cement : 4 fine sand) :41.1) Raised Band
Distempering with oil bound washable distemper of approvedbrand and manufacture to give an even shade.42.1) New work (two or more coats) over and includingpriming coat with cement primer
Applying one coat of cement primer of approved brand andmanufacture on wall surface :43.1) Cement primer
Finishing walls with Premium Acrylic Smooth exterior paintwith Silicone additives of required shade.44.1) New work (Two or more coats applied @ 1.43 ltr/ 10sqm. over and including base coat of water proofing cementpaint applied @ 2.20 kg/ 10 sqm).
French sprit polishing:Two or more coats on new works
including a coat of wood filler.
Wall painting with plastic emulsion paint of approved brand
-
8/6/2019 Girls Hostel Citd
8/74
ItemNo Description Quantity Unit Rate
51
80.00 kg 0.85
52
55.00 sqm 24.70
53
8.00 each 3282.95
54
8.00 each 1044.90
55
8.00 each 705.90
56
Dismantling steel work in built up sections in angles, tees,flats and channels including all gusset plates, bolts, nuts,cutting rivets, welding etc. including dismembering andstacking within 50 metres lead.
Dismantling roofing including ridges, hips valleys and guttersetc., and stacking the material within 50 metres lead of:53.1) G.S. Sheet
Providing and fixing white vitreous china pedestal type watercloset (European type W.C. pan) with seat and lid, 10 litre lowlevel white P.V.C. flushing cistern with manually controlleddevice (handle lever), conforming to IS : 7231,Parryware/Hindware/Seabird / Orient ( Coral ) with all fittings
and fixtures complete including cutting and making good thewalls and floors wherever required.54.1) W.C. pan with ISI marked white solid plastic seat and lid
Providing and fixing wash basin with C.I./M.S. brackets, 15mm C.Pn brass pillar taps, Kingston/Gem/Techno/Parko, 32mm C.P. brass waste of standard pattern, including painting
of fittings and brackets, cutting and making good the wallswherever require:55.1) Flat back wash basin size 550x400 mm with single 15mm C.P. brass pillar tap
Providing and fixing white vitreous china pedestal forwash basin completely recessed at the back for the receptionof pipes and fittings.
Providing and fixing P.V.C. waste pipe for sink or wash basin
-
8/6/2019 Girls Hostel Citd
9/74
ItemNo Description Quantity Unit Rate
61
8.00 each 489.60
8.00 each 364.45
62
40.00 each 126.50
63.2) 75 mm50.00 each 107.80
63
16.00 each 573.35
64
60.00 mtrs 18.60
65.2) 75 mm diameter pipe 50.00 mtrs 14.25
65
Providing and fixing single equal plain junction of requireddegree with access door, insertion rubber washer 3 mm thick,bolts and nuts complete.62.1) 100x100x100 mm62.1.1) Centrifugally cast(spun) iron as per IS - 3989
62.2) 75x75x75mm62.2.1) Centrifugally cast (spun) iron S&S as per IS: 3989
Providing lead caulked joints to sand cast iron/centrifugallycast (spun) iron pipes and fittings of diameter:63.1) 100 mm
Providing and fixing trap of self cleansing design with screweddown or hinged grating with or without vent arm complete,including cost of cutting and making good the walls andfloors :64.1) 100 mm inlet and 75 mm outlet64.1.1) Centrifugally Cast (Spun) Iron S&S as per IS: 3989.
Painting sand cast iron/centrifugally cast (spun) iron soil,waste vent pipes and fittings with paint of any colour such aschocolate grey, or buff etc. over a coat of primer (of approvedquality) for new work :65.1) 100 mm diameter pipe
Providing and fixing M.S. holder bat clamp of approved
-
8/6/2019 Girls Hostel Citd
10/74
ItemNo Description Quantity Unit Rate
68
16.00 each 44.75
69
8.00 each 75.90
70.2) 20mm nominal bore 8.00 each 96.80
70
8.00 each 315.80
71
16.00 each 313.10
72
15 mm nominal bore 16.00 each 347.65
73
Providing and fixing uplasticised PVC connection pipe withbrass unions69.1) 45 cm length69.1.1) 15 mm nominal bore
Providing and fixing G.I. Union in G.I. pipe including cutting
and threading the pipe and making long screws etc. complete(new work)70.1) 15mm nominal bore
Providing and fixing C.P. brass long body bib cock ofapproved quality conforming to IS standards and weighingnot less than 690 gms.a) 15 mm nominal bore.
Providing and fixing C.P. brass stop cock (concealed) ofstandard design and of approved make conforming toIS:8931a) 15 mm nominal bore
Providing and fixing C.P. brass angle valve for basin mixerand geyser points of approved quality conforming to IS:8931
Providing and fixing anodised aluminium work for doors,windows, ventilators and partitions with extruded built upstandard tubular and other sections of approved makeconforming to IS733 and IS 1285 anodised transparent ordyed to required shade according to IS:1868.(Minimumanodic coating of grade AC 15), fixed with rawl plugs andscrews or with fixing clips, or with expansion hold fastenersincluding necessary filling up of gaps at junctions, at topbottom and sides with required PVC/neoprene felt etc.Aluminium sections shall be smooth, rust free, straight, mitred
-
8/6/2019 Girls Hostel Citd
11/74
ItemNo Description Quantity Unit Rate
74
35.00 sqm 673.55
75 Providing and fixing PVC Corner beeding for Ceramic tiles40.00 mtrs 50.0
76
8.00 each 458.15
77
120.00 sqm 40.00
78
70.00 sqm 350.80
Providing and fixing glazing in aluminium door, window,ventilator shutters and partitions etc. with PVC / neoprenegasket etc. complete as per the architectural drawings andthe directions of engineer-in-charge . (Cost of aluminium snapbeading shall be paid in basic item)74.1) With glass panes of 5.50 mm thickness (weight not lessthan 13.75 kg / sqm)
Providing and fixing CP brass soap dish of approved quality.76.1) New dolphin 8103 of make Elvis or equivalet
Providing and fixing chicken wire mesh of 24 G x 12.5 mmhexagonal mesh in junctions of RCC members / Brickmasonry walls with nails etc . Complete .
Providing and laying APP (Atactic Polypropylene Polymer)modified prefabricated five layer 3mm thick water proofingmembrane, black finished reinforced with non-woven
polyester matt consisting of a coat of bitumen primer forbitumen membrane @ 0.40 ltr/sum. by the same membranemanufacture of density at 25C, 0.87-0.89 kg/ltr and viscosity70-160 cps. Over the primer coat the layer of membrane shallbe laid using Butane Torch and sealing all joints etc., andpreparing the surface complete. The vital physical andchemical parameters of the membrane shall be as under :Joint strength in longitudinal and transverse direction at 23Cas 650/450N/5cm. Tear strength in longitudinal andtransverse direction as 300/250N. Softening point ofmembrane not less than 150C. Cold flexibility shall be upto-2C when tested in accordance with ASTM, D - 5147. The
-
8/6/2019 Girls Hostel Citd
12/74
ItemNo Description Quantity Unit Rate
83
8.00 each 613.15
84
10.00 sqm 349.95
85
130.00 sqm 87.75
86
120.00 mtrs 60.00
87-55.00 sqm 300.00
88-80.00 kg 30.00
89
30.00 sqm 8500.00
90
Providing and fixing CP brass towel rail 600 mm of approvedquality84.1) Newdolphin 8101 of make Elvis or equivalet
Providing ans fixing stainless steel fly proof mesh for
aluminium windows of standard quality as per the directionsof the Engineer-in - charge.
Extra for laying Barcode design cermic design glazed tiles forskirting in place of plain colour tiles.
Dismantling GI pipe and refixing the same after completion ofthe repair work all as directed by the Engineer in charge.
87.1) 15 mm to 40 mm nominal bore
Credit for Precoated GI Sheet obtained from the dismantlingof the existing mumty roof.
Credit for mild steel obtained from the dismantling of theexising mumty roof.
Providing and fixing Built in cupboard of depth 600 mm bodyand of required size having approved shade and pattern of
1mm thick lamination on exposed outer faces over 18mmthick plywood (9 ply) exterior grade, boiling water proof ofapproved brand ISI marked and painting on inner face ofshutter, shelves and inner side box complete including CPbrass butt hinges and necessary screws etc. all complete asper the directions of the Engineer in charge (Payment will bemade only on surface area in elevation)
Providing and fixing dressing table with 1.30x1.40m size 5mm
-
8/6/2019 Girls Hostel Citd
13/74
ItemNo Description Quantity Unit Rate
Say Rs.
Assistant Engineer(P)-I
HCC-II, CPWD, Hyderabad
Executive Enginee
HCC-II, CPWD, Hyde
Superintending EngineerHCC-II, CPWD, Hyderabad
-
8/6/2019 Girls Hostel Citd
14/74
Amount DSR ITEM No
26374.00
5369.00 4.2.3
93627.00 5.2.1
40463 00
4.1.10+Extra for20 mm and upto
floor V level
5.3+Extra for
-
8/6/2019 Girls Hostel Citd
15/74
Amount DSR ITEM No
1833.00 5.9.16.1
683200.00 5.22.6
19800.00 MR
4500.00 MR
-
8/6/2019 Girls Hostel Citd
16/74
Amount DSR ITEM No
45829.00 8.2.1.1
9843.00 8.3.1
44205.00 9.20.1
-
8/6/2019 Girls Hostel Citd
17/74
Amount DSR ITEM No
565.00 9.100.2
305.00 9.101.1
14124.00 9.12
-
8/6/2019 Girls Hostel Citd
18/74
Amount DSR ITEM No
20480.00 10.25.2
111255.00 11.23.5
72358.00 11.36
23946 00 11 37
-
8/6/2019 Girls Hostel Citd
19/74
Amount DSR ITEM No
1208.00 12.42.5.2
2368.00 12.42.6.2
1744.00 12.43.2
-
8/6/2019 Girls Hostel Citd
20/74
Amount DSR ITEM No
67500.00 MR
1097.00 13.28.3
20775.00 13.41.1
17200.00 13.42.1
45075.00 13.47.1
6048.00 13.68.1
-
8/6/2019 Girls Hostel Citd
21/74
Amount DSR ITEM No
68.00 15.18
1359.00 15.28.1
26264.00 17.3.1
8359.00 17.7.4
5647.00 17.8
-
8/6/2019 Girls Hostel Citd
22/74
Amount DSR ITEM No
3917.00 17.43.1.2
2916.00 17.43.2.2
5060.00 17.58.1
5390.00 17.58.2
9174.00 17.60.2.2
1116.00 17.65.1
713.00 17.65.2
-
8/6/2019 Girls Hostel Citd
23/74
Amount DSR ITEM No
716.00 18.21.2
607.00 18.46.1
774.00 18.46.2
2526.00 18.51.1
5010.00 18.52.1
5562.00 18.53
-
8/6/2019 Girls Hostel Citd
24/74
Amount DSR ITEM No
23574.00 21.3.2
2000.00 MR
3665.00 MR
4800.00 MR
24556.00 MR
-
8/6/2019 Girls Hostel Citd
25/74
Amount DSR ITEM No
4905.00 MR
3500.00 MR
11408.00 MR
7200.00 MR
-16500.00 MR
-2400.00 MR
255000.00 MR
A t DSR ITEM N
-
8/6/2019 Girls Hostel Citd
26/74
Amount DSR ITEM No
52,57,800/-
(P)abad
-
8/6/2019 Girls Hostel Citd
27/74
GOVERNMENT OF INDIA
CENTRAL PUBLIC WORKS DEPARTMENT
State : Andhra Pradesh
Branch : B&R
Head of Account
Major Head
Minor Head Deposit work
Detailed Head
HISTORY:
Name of work: Vertical extension (3rd floor) of girls hostel for CITD at Bala
This Draft Detailed Estimate has been prepared by Er. P.Kanakaraju, ExIII, CPWD, Hyderabad and processed by Shri M. Seetha Rama Rao, ExecuII, CPWD, Hyderabad amounting to Rs.52,57,800/- including 5% contingenc
This detailed estimated amounting to Rs 52,57,800/- including 5% conting
to cover the probable cost of the above mentioned work. Administrative ApSsanction received from client department Vide Lt.No Citd/Estd/Girls-Hos./2corresponding civil works provision is Rs.70,50,658/- . Hence this estimateThis estimate has been prepared based on the actual quantities of existiproposed building to be constructed, for accord of Technical Sanction of the
DESIGN & SCOPE: The following provisions have been made in this estim1) Vertical extension (3rd floor) of girls hostel for CITD.
-
8/6/2019 Girls Hostel Citd
28/74
WC ESTT. : To be met out of Contigencies .
COST : Rs.52,57,800/- including 5% Contingencies
RATE : DSR 2007 with upto date Cost Index & LMR.
METHOD : By Contract after call of tenders.
TIME : 6 months.
LAND : Available.
Assistant Engineer (P) Executive EHCD-III, CPWD, Hyderabad HCD-III, CPWD
Superintending EngineerHCC-II, CPWD, Hyderabad.
-
8/6/2019 Girls Hostel Citd
29/74
Circle- HCC-II
-
agar, Hyderabad.
cutive Engineer, HCD-tive Engineer(P), HCC-ies.
ncies has been framed
proval and Expenditure010 Dt.22/02/2010 andis within the provision.ng building over whichCompetent Authority.
te.
-
8/6/2019 Girls Hostel Citd
30/74
gineer(P), Hyderabad
-
8/6/2019 Girls Hostel Citd
31/74
SCHDEULE OF QUANTITIES (Civ
Name of work: : Vertical Extension (3rd floor) at Girls Hostel for
ItemNo Description Quantity Unit
1
10.00 cum
2
1.50 cum
3
18.00 cum
4
10.00 cum
Providing and laying cement concrete in sunken floors upto floor five levelexcluding the cost of centring and shuttering ,finishing 1:5:10 (1 cement :5 finesand :10 graded stone agreegate 20mm nominal size)
Providing and laying cement concrete in retaining walls, return walls, walls (anythickness) including attached pilasters, columns, piers, abutments, pillars, posts,struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchorblocks, plain window sills, fillets etc.upto floor five level excluding the cost ofcentring, shuttering and finishing.2.1) 1:2:4 (1 Cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominalsize)
Reinforced cement concrete work in walls (any thickness), including attachedpilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers,abutments, posts and struts etc. upto floor five level excluding cost of centring,shuttering, finishing and reinforcement3.1) 1:1 1/2 :3 (1 cement : 1 1/2 coarse sand : 3 graded stone aggregate 20 mmnominal size)
Reinforced cement concrete work in beams, suspended floors, roofs having slopeupto 15 landings, balconies, shelves, chajjas, lintels, bands, plain window sills,staircases and spiral stair cases upto floor five level excluding the cost of centring,shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand :3graded stone aggregate 20 mm nominal size).
-
8/6/2019 Girls Hostel Citd
32/74
5
4.00 cum
6
50.00 sqm
6.2) Suspended floors, roofs, landings, balconies and access platform.400.00 sqm
6.3) Lintels, beams, plinth beams, girders, bressumers and cantilevers.
350.00 sqm
6.4) Columns, Pillars, Piers, Abutments, Posts and Struts150.00 sqm
6.5) Stairs, (excluding landings) except spiral-staircases.20.00 sqm
100.00 sqm
730.00 mtrs
8
16000.00 kg
Reinforced cement conccrete work in vertical and horizontal fins individual ror foringbox louvers, facias and eaves board up to floor five level excluding the cost ofcentring, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5coarse sand : 3 graded stone aggregate 20mm nominal size).
Centring and shuttering including strutting, propping etc. and removal of form for:6.1) Walls (any thickness) including attached pilasters, butteresses, plinth andstring courses etc.
6.6) Vertical and horizonatal fins individual ro forming box louvers band , facias andeaves board
Edges of slabs and breaks in floors and walls.7.1) Under 20 cms wide
Reinforcement for R.C.C. work including straightening, cutting, bending, placing inposition and binding all complete.8.1) Thermo-Mechanically Treated bars.
-
8/6/2019 Girls Hostel Citd
33/74
9
90.00 mtrs
10
90.00 mtrs
11
100.00 cum
Supplying precast RCC frames for doors of sectional area not less than 60sq.cm inready to assemble members with mortice tenon dovetailed joints members castedwith controlled concrete conforming to M 40 grade and having reinforcement notless than 120kg/cum of concrete including making a provision for fixing required noof MS oxidised butt hinges, holds fasts and other fittings for fixing sliding door bolts,tower bolts and cleats etc., by means of machineable polymer wonder blocks orMS. galvanised plate complete as per the CPWD Specification and directions of the
engineer in charge.
Fixing of precast RCC frames ( precast RCC framed members to be supplied freeof cost)including assembling the members for door frames fixing to MS machinaryor RCC wall face including providing and fixing six no. holds fasts of MS. Flat40x5mm and of lenght 40 cm as per frame embedding in cement concrete blocks ofsize 30x10x 15cm of mix 1:3:6 (i cement : 3 coarse sand : 6 graded stoneaggregate 20mm nominal size ) complete as per specification and the direction ofEngineer in charge.
Providing and laying in position ready mixed concrete manufactured in fullyautomatic batching plant and transported to site of work in transit mixer for a leadupto 10kms having continuous agitated mixer, manufactured as per mix design ofspecified grade for reinforced cement concrete work including pumping of R.M.C.from transit mixer to site of laying , excluding the cost of centering, shutteringfinishing and reinforcement including cost of admixtures in recommendedproportions as per IS : 9103 to accelerate/ retard setting of concrete, improve
workability without impairing strength and durability as per direction of the Engineer- in - charge. M-25 grade Reinforced cement concrete by using 380kg of cementper cum of concrete.All works upto floor V level.
-
8/6/2019 Girls Hostel Citd
34/74
12
320.00 sqm
13
140.00 cum
14
35.00 sqm
15
170.00 mtrs
Half brick masonry with fly ash lime bricks (FALG Bricks) conforming to IS:12894-1989, class designation 10 average compressive strength in super structure aboveplinth level upto floor V level in :12.1) Cement mortar 1:4 (1 Cement : 4 average Coarse sand)
Brick work with fly ash lime bricks (FALG Bricks) conforming to IS:12894-1989,class designation 10 average compressive strength in super structure above plinthlevel upto floor V level in: 13.1) Cement mortar 1:6 (1 Cement : 6 Coarse sand)
Providing and fixing 16mm thick gang saw cut mirror polished (premoulded andprepolished) machine cut for kitchen platforms, vanity counters ,window sills , faciasand similar locations of required size of approved shade, colour and texture laidover 20mm thick base cement mortar 1:4 (1 cement : 4 coarse sand) with jointstreated with white cement, mixed with matching pigment, epoxy touch ups,including rubbing, curing moulding and polishing to edge to give high gloss finishetc. complete at all levels.
14.1) Raj Nagar Plain white marble/ Udaipur green marble/ Zebra black marble.14.1.1) Area of slab upto 0.50 sqm.
Extra for providing edge moulding to 18mm thick marble stone counters, Vanitiesetc. including machine polishing to edge to give high gloss finish etc. complete asper design approved by Engineer-in-Charge15.1) Marble work
-
8/6/2019 Girls Hostel Citd
35/74
16
30.00 sqm
17
700.00 kg.
18
24.00 each
19
8.00 each
20.2) 250x16 mm 24.00 each
20
48.00 each
Providing and fixing ISI marked flush door shutters confirming to IS : 2202 (Part I )decorative type, core of block board construction with frame of 1st class hard woodand well matched teak 3 ply veneering with vertical grains or cross bands and faceveneers on both faces of shutters(century plywoodor or equivalent.16.1) 35 mm thick including ISI marked Stainless Steel butt hinges with necessaryscrews.
Providing and fixing M.S. grills of required pattern in frames of windows etc. withM.S. flats, square or round bars etc. all complete.18.1) Fixed to openings/wooden frames with rawl plugs screws etc.
Providing and fixing special quality bright finished brass cupboard or ward robelocks with four levers including necessary screws etc. complete (best make ofapproved quality).19.1) 50 mm
Providing and fixing aluminium sliding door bolts ISI marked anodised (anodiccoating not less than grade AC 10 as per IS : 1868) transparent or dyed to requiredcolour or shade with nuts and screws etc. complete :20.1) 300x16 mm
Providing and fixing aluminium tower bolts ISI marked anodised ( anodic coatingnot less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colouror shade with necessary screws etc. complete:21.1) 200x10 mm
-
8/6/2019 Girls Hostel Citd
36/74
21
32.00 each
22.2) 100 mm 16.00 each
22
16.00 each
23
40.00 mtrs
Providing and fixing aluminium handles ISI marked anodised (anodic coating notless than grade AC 10 as per IS : 1868) transparent or dyed to required colour orshade with necessary screws etc. complete:22.1) 125 mm
Providing and fixing aluminium hanging floor door stopper ISI marked anodised(anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyedto required colour and shade with necessary screws etc. complete.23.1) Single rubber stopper
Providing and fixing factory made P.V.C. door frame of size 50x47mm with a wallthickness of 5mm, made out of extruded 5mm rigid PVC foam sheet mitred atcorners and joined with 2 Nos. of 150mm long brackets of 15x15mm M.S. square
tube, the vertical door profiles to be reinforced with 19x19mm M.S. square tube of19 gauge, EPDM rubber gasket weather seal to be provided through out the frame.The door frame to be fixed to the wall using M.S. screws of 65/100mm sizecomplete as per manufacturers specification and direction of Engineer-in-Charge.
-
8/6/2019 Girls Hostel Citd
37/74
24
14.00 sqm
25
2.00 sqm
26
20.00 each
30mm thick factory made panel PVC door shutter consisting of frame made out ofM.S. tubes of 19 gauge thickness and size of 19mm x 19mm for styles and15x15mm for top & bottom rails. M.S. frame shall have a coat of steel primers ofapproved make and manufacture . M.S. frame covered with 5mm thick heatmoulded PVC 'C' channel of size 30mm thickness, 70mm width out of which 50mmshall be flat and 20mm shall be tapered in 45degree angle on either side formingstyles; and 5mm thick, 95mm wide PVC sheet out of which 75mm shall be flat and
20mm shall be tapered in 45 degree on the inner side to form top and bottom railand 115mm wide PVC sheet out of which 75mm shall be flat and 20mm shall betapered on both sides to form lock rail. Top, bottom and lock rails shall be providedeither side of the panel. 10mm (5mm x 2 ) thick, 20mm wide cross PVC sheet beprovided as gap insert for top rail & bottom rail. paneling of 5mm thick both sidePVC sheet to be fitted in the M.S. frame welded/ sealed to the styles & rails with7mm (5mm+2mm) thick x 15mm wide PVC sheet beading on inner side, and joinedtogether with
solvent cement adhesive. An additional 5mm thick PVC strip of 20mm width is to bestuck on the interior side of the 'C' Channel using PVC solvent adhesive etc.complete as per direction of Engineer-in-charge. Manufacturers specification &drawing (for W.C. and bathroom door shutter).
Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6mm angleiron and 3mm M.S. gusset plates at the junctions and corners, all necessary fittings
complete, including applying a priming coat of approved steel primer.26.1) Using M.S. angels 40x40x6 mm for diagonal braces
Providing and fixing M.S. fan clamp type I or II of 16 mm dia M.S. bar bent to shapewith hooked ends in R.C.C. slabs, beams during laying including painting theexposed portion of loop, all as per standard design complete.
-
8/6/2019 Girls Hostel Citd
38/74
27
400.00 kg
28
100.00 sqm
29
130.00 sqm
30
40.00 sqm
Steel work welded in built up sections/framed work including cutting hoisting, fixingin position and applying a priming coat of approved steel primer using structuralsteel etc.as required.28.1) In gratings, frames, guard bar, ladders, railings, brackets, gates & similarworks.
Marble stone flooring with 16mm thick marble stone (sample of marble shall beapproved by Engineer-in-charge) over 20 mm (average) thick base of cementmortar 1:4 (1 cement :4 coarse sand) laid and jointed with grey cement slurryincluding rubbing and polishing complete with:29.1) Udaipur Green Marble
Providing and fixing Ist quality ceramic glazed tiles conforming to IS : 13753 ofminimum thickness 5 mm of approved make like NITCO, ORIENT, SOMANYKAJARIA, or equivalent make in all colours, shades except begundy, bottle green,black of any size as approved by Engineer-in-Charge in skirting, risers of steps and
dados over 12 mm thick bed of Cement Mortar 1:3 (1 cement : 3 Coarse sand) andjointing with grey cement slurry @ 3.3kg per sqm including pointing in white cementmixed with pigment of matching shade complete.
Providing and laying Ceramic glazed floor tiles 300x300 mm (thickness to bespecified by the manufacturer) of 1st quality conforming to IS : 13755 of NITCO,ORIENT, SOMANY KAJARIA, or equivalent make in colours such as White, Ivory,Grey, Fume Red Brown, laid on 20 mm thick Cement Mortar 1:4 (1 cement : 4
Coarse sand) including pointing the joints with white cement and matching pigmentetc., complete.
-
8/6/2019 Girls Hostel Citd
39/74
31
300.00 sqm
32
35.00 mtrs
33
9.00 each
9.00 each
34
18.00 each
Providing and laying vitrified floor tiles (Full body) in different sizes (thickness to bespecified by the manufacturer) with water absorption's less than 0.08% andconforming to IS : 15622 of approved make in all colours and shades, laid on20mm thick cement mortar 1:4 (1 cement : 4 coarse sand) including grouting the
joints with white cement and matching pigments etc., complete.32.1) Size of Tile 60x60 cm
Providing and fixing on wall face unplasticised - Rigid PVC rain water pipesconforming to IS : 13592 Type A including jointing with seal ring conforming to IS :5382 leaving 10 mm gap for thermal expansion. (i) Single socketed pipes(prince company or equivalent)33.1) 110 mm diameter
Providing and fixing on wall face unplasticised - PVC moulded fittings/accessoriesfor unplasticised - Rigid PVC rain water pipes conforming to IS : 13592 Type A
including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap forthermal expansion.(prince company or equivalent)34.1) Bend 87.534.1.1) 110 mm bend
34.2) Shoe (Plain)34.2.1) 110 mm Shoe
Providing and fixing unplasticised -PVC pipe clips of approved design tounplasticised - PVC rain water pipes by means of 50x50x50mm hard wood plugs,
screwed with M.S. screws of required length including cutting brick work and fixingin cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc.complete.35.1) 110 mm
-
8/6/2019 Girls Hostel Citd
40/74
35
430.00 sqm
361000.00 sqm
37
800.00 sqm
Providing and laying integral cement based water proofing treatment includingpreparation of surface as required for treatment of roofs, balconies, terraces etcconsisting of following operations. (a) Applying and grouting a slurry coat of neatcement using 2.75 kg/sqm. of cement admixed with proprietary water proofingcompound conforming to IS. 2645 over the RCC slab including cleaning the surfacebefore treatment. b) Laying cement concrete using broken bricks/brick bats 25 mmto 100mm size with 50% of cement mortar 1:5 (1 cement : 5 coarse sand) admixed
with proprietary water proofing compound conforming to IS : 2645 over 20 mm thicklayer of cement mortar of mix 1:5 (1 cement :5 coarse sand ) admixed withproprietary water proofing compound conforming to IS : 2645 to required slope andtreating similarly the adjoining walls upto 300 mm height including rounding of
junctions of walls and slabs.
c) After two days of proper curing applying a second coat of cement slurry admixedwith proprietary water proofing compound conforming to IS : 2645.d) Finishing the surface with 20 mm thick jointless cement mortar of mix 1:4 (1cement :4 coarse sand) admixed with proprietary water proofing compoundconforming to IS : 2645 and finally finishing the surface with trowel with neatcement slurry and making of 300x300 mm square.e) The whole terrace so finished shall be flooded with water for a minimum periodof two weeks for curing and for final test. All above operations to be done in orderand as directed and specified by the Engineer-in-Charge :36.1) With average thickness of 120mm and minimum thickness at khurra as 65mm.
12 mm cement plaster of mix :37.1) 1:6 (1 cement : 6 coarse sand)
15 mm cement plaster on rough side of single or half brick wall of mix :38.1) 1:6 (1 cement : 6 coarse sand)
-
8/6/2019 Girls Hostel Citd
41/74
38500.00 sqm
39
1500.00 sqm
40665.00 cm per metre
41
500.00 sqm
421000.00 sqm
43
750.00 sqm
6mm cement plaster to ceiling of mix:39.1) 1:3 (1 cement : 3 fine sand)
Supplying and applying Altek superfine putty (internal) or equivalent having anti-fungal and anti-rusting, agents, manufactured with marble powder of 20 micronsand acrylic binder using spatula in two coats directly over, the cement plasteredsurface to give an ultra smooth, uniform and even surface including scrapping ofloose particles etc. from plastered surface and smoothening the surface with sandpaper etc. complete as directed by Engineer-in-charge.
12 mm thick plain cement mortar bands in cement mortar 1:4 (1 cement : 4 finesand) :41.1) Raised Band
Distempering with oil bound washable distemper of approved brand andmanufacture to give an even shade.42.1) New work (two or more coats) over and including priming coat with cementprimer.
Applying one coat of cement primer of approved brand and manufacture on wallsurface :43.1) Cement primer.
Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives ofrequired shade.44.1) New work (Two or more coats applied @ 1.43 ltr/ 10 sqm. over and includingbase coat of water proofing cement paint applied @ 2.20 kg/ 10 sqm).
-
8/6/2019 Girls Hostel Citd
42/74
4480.00 sqm
45
1000.00 sqm
46
50.00 sqm
47
2300.00 sqm
4815.00 cum
49
40.00 cum
50
50.00 cum
51
80.00 kg
French sprit polishing:Two or more coats on new works including a coat of woodfiller.
Wall painting with plastic emulsion paint of approved brand and manufacture togive an even shade:46.1) Two or more coats on new work
Painting with synthetic enamel paint of approved brand and manufacture to give aneven shade :47.1) Two or more coats on new work
Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives ofrequired shade.48.1) Old work (one or more coats applied @ 0.83 lt r/10 sqm).
Demolishing R.C.C. work manually/ by mechanical means including stacking ofsteel bars and disposal of unserviceable material within 50 metres lead as perdirection of Engineer-in-charge.
Demolishing brick work manually/ by mechanical means including stacking ofserviceable material and disposal of unserviceable material within 50 metres leadas per direction of Engineer-in-charge.50.1) In cement mortar
Demolishing cement concrete manually/ by mechanical means including disposal ofmaterial within 50 metres lead as per direction of Engineer-in-charge.51.1) 1:4:8 or leaner mix
Dismantling steel work in built up sections in angles, tees, flats and channelsincluding all gusset plates, bolts, nuts, cutting rivets, welding etc. includingdismembering and stacking within 50 metres lead.
-
8/6/2019 Girls Hostel Citd
43/74
52
55.00 sqm
53
8.00 each
54
8.00 each
55
8.00 each
56
8.00 each
57
8.00 each
Dismantling roofing including ridges, hips valleys and gutters etc., and stacking thematerial within 50 metres lead of:53.1) G.S. Sheet
Providing and fixing white vitreous china pedestal type water closet (European typeW.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern withmanually controlled device (handle lever), conforming to IS : 7231,Parryware/Hindware/Seabird / Orient ( Coral ) with all fittings and fixtures complete
including cutting and making good the walls and floors wherever required.54.1) W.C. pan with ISI marked white solid plastic seat and lid
Providing and fixing wash basin with C.I./M.S. brackets, 15 mm C.P. brass pillartaps, Kingston/Gem/Techno/Parko, 32 mm C.P. brass waste of standard pattern,including painting of fittings and brackets, cutting and making good the wallswherever require:55.1) Flat back wash basin size 550x400 mm with single 15 mm C.P. brass pillartap.
Providing and fixing white vitreous china pedestal for wash basin completelyrecessed at the back for the reception of pipes and fittings.
Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C.waste fittings complete.57.1) Semi rigid pipe57.1.1) 32 mm dia
Providing and fixing mirror thickness of required shape and size with plasticmoulded frame of approved make and shade with 6 mm thick hard board backing.58.1) Rectangular shape 453x357mm
58 P idi d fi i il t d t i
-
8/6/2019 Girls Hostel Citd
44/74
58
45.00 mtrs
40.00 mtrs
59
8.00 each
60
4.00 each
61
8.00 each
8.00 each
62
40.00 each
63.2) 75 mm50.00 each
Providing and fixing soil, waste and vent pipes :59.1) 100 mm dia59.1.1) Centrifugally cast (spun) iron socketed pipe as per IS: 3989
59.2) 75 mm diameter59.2.1) Centrifugally cast (spun) iron S&S pipe
Providing and fixing bend of required degree with access door, insertion rubberwasher 3 mm thick, bolts and nuts complete.60.1) 75 mm dia60.1.1) Centrifugally cast (spun) iron socketed pipe as per IS: 3989
Providing and fixing double equal junction of required degree with access door,insertion rubber washer 3 mm thick, bolts and nuts complete :61.1) 75x75x75x75 mm61.1.1) Centrifugally cast(spun) iron as per IS - 3989
Providing and fixing single equal plain junction of required degree with access door,insertion rubber washer 3 mm thick, bolts and nuts complete.62.1) 100x100x100 mm62.1.1) Centrifugally cast (spun) iron as per IS - 3989
62.2) 75x75x75mm62.2.1) Centrifugally cast (spun) iron S&S as per IS: 3989
Providing lead caulked joints to sand cast iron/centrifugally cast (spun) iron pipesand fittings of diameter:63.1) 100 mm
63 Pro iding and fi ing trap of self cleansing design ith scre ed do n or hinged
-
8/6/2019 Girls Hostel Citd
45/74
63
16.00 each
64
60.00 mtrs
65.2) 75 mm diameter pipe50.00 mtrs
65
32.00 each
66
60.00 mtrs
Providing and fixing trap of self cleansing design with screwed down or hingedgrating with or without vent arm complete, including cost of cutting and makinggood the walls and floors :64.1) 100 mm inlet and 75 mm outlet64.1.1) Centrifugally Cast (Spun) Iron S&S as per IS: 3989.
Painting sand cast iron/centrifugally cast (spun) iron soil, waste vent pipes andfittings with paint of any colour such as chocolate grey, or buff etc. over a coat ofprimer (of approved quality) for new work :65.1) 100 mm diameter pipe
Providing and fixing M.S. holder bat clamp of approved design to sand cast iron/cast iron (spun) pipes comprising of M.S. flat brackets made of 50x5mm flat ofspecified shape, projecting 75mm outside the wall surface and fixed on wall with4nos, 6mm dia expansion hold fasteners including drilling necessary holes in brickwall/ CC/ RCC surface and the cost of bolts etc. The pipes shall be fixed to thealready fixed brackets with the help of 30mm x1.6mm galvanised M.S. flats ofspecified shape and of total length 420mm and shall be fixed with M.S. nuts, bolts,& washers of size 25x6mm, one bolts on each side of the pipe.66.1) Total bracket length 580mm of approved shape and design (for single,100mm dia pipe).
Providing and fixing G.I. pipes complete with G.I. fittings and clamps,includingcutting and making good the walls etc. (internal work)67.1) Exposed on wall67.1.1) 25mm dia. nominal bore
67 Concealed pipe including painting with anti corrosive bitumastic paint cutting
-
8/6/2019 Girls Hostel Citd
46/74
67
50.00 mtrs
68.2) 20mm dia. nominal bore30.00 mtrs
68
16.00 each
69
8.00 each
70.2) 20mm nominal bore 8.00 each
70
8.00 each
71
16.00 each
72
15 mm nominal bore16.00 each
Concealed pipe including painting with anti corrosive bitumastic paint , cuttingchases and making good the wall.68.1) 15 mm dia .nominal bore
Providing and fixing uplasticised PVC connection pipe with brass unions69.1) 45 cm length69.1.1) 15 mm nominal bore
Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipeand making long screws etc. complete (new work)70.1) 15mm nominal bore
Providing and fixing C.P. brass long body bib cock of approved quality conformingto IS standards and weighing not less than 690 gms.a) 15 mm nominal bore.
Providing and fixing C.P. brass stop cock (concealed) of standard design and ofapproved make conforming to IS:8931 a) 15 mm nominal bore
Providing and fixing C.P. brass angle valve for basin mixer and geyser points ofapproved quality conforming to IS:8931
73 Providing and fixing anodised aluminium work for doors windows ventilators and
-
8/6/2019 Girls Hostel Citd
47/74
73
250.00 kg
200.00 kg
74
35.00 sqm
75 Providing and fixing PVC Corner beeding for Ceramic tiles.40.00 mtrs
Providing and fixing anodised aluminium work for doors, windows, ventilators andpartitions with extruded built up standard tubular and other sections of approvedmake conforming to IS733 and IS 1285 anodised transparent or dyed to requiredshade according to IS:1868.(Minimum anodic coating of grade AC 15), fixed withrawl plugs and screws or with fixing clips, or with expansion hold fastenersincluding necessary filling up of gaps at junctions, at top bottom and sides withrequired PVC/neoprene felt etc. Aluminium sections shall be smooth, rust free,straight, mitred and jointed mechanically wherever required including cleat angle,Aluminium snap beading for glazing/panelling, C.P brass/stainless steel screws, allcomplete as per architectural drawings and the directions of Engineer-in-Charge.(Glazing and panelling to be paid for separately.)73.1) For fixed portion.73.1.1) Powder coated aluminium (minimum thickness of powder coating 50micron)
73.2) For shutters of doors, windows & ventilators including providing and fixinghinges / pivots and making provision for fixing of fittings wherever required includingthe cost of PVC / neoprene gasket required (Fittings shall be paid for separately.)73.2.1) Powder coated aluminium (minimum thickness of powder coating 50micron)
Providing and fixing glazing in aluminium door, window, ventilator shutters andpartitions etc. with PVC / neoprene gasket etc. complete as per the architecturaldrawings and the directions of engineer-in-charge . (Cost of aluminium snapbeading shall be paid in basic i tem)74.1) With glass panes of 5.50 mm thickness (weight not less than 13.75 kg / sqm)
768 00 h
Providing and fixing CP brass soap dish of approved quality
-
8/6/2019 Girls Hostel Citd
48/74
768.00 each
77
120.00 sqm
78
70.00 sqm
79
40.00 kg
80
8.00 each
Providing and fixing CP brass soap dish of approved quality.76.1) New dolphin 8103 of make Elvis or equivalet
Providing and fixing chicken wire mesh of 24 G x 12.5 mm hexagonal mesh injunctions of RCC members / Brick masonry walls with nails etc . Complete .
Providing and laying APP (Atactic Polypropylene Polymer) modified prefabricatedfive layer 3mm thick water proofing membrane, black finished reinforced with non-woven polyester matt consisting of a coat of bitumen primer for bitumen membrane@ 0.40 ltr/sum. by the same membrane manufacture of density at 25C, 0.87-0.89kg/ltr and viscosity 70-160 cps. Over the primer coat the layer of membrane shallbe laid using Butane Torch and sealing all joints etc., and preparing the surfacecomplete. The vital physical and chemical parameters of the membrane shall be asunder :Joint strength in longitudinal and transverse direction at 23C as 650/450N/5cm.
Tear strength in longitudinal and transverse direction as 300/250N. Softening pointof membrane not less than 150C. Cold flexibility shall be upto -2C when tested inaccordance with ASTM, D - 5147. The laying of membrane shall be got donethrough the authorised applicator of the manufacturer of membrane : 3mm thick.
Providing and fixing stainless steel railing using stainless steel tubes made of
stainless steel - 304 grade, with balusters of approved pattern including cutting,welding, grinding the joints, drilling of holes and final polishing etc. complete asdirected by engineer-in-charge.
Providing and fixing C.P Brass Wall mixer with over head shower arrangementonly but without Shower of make)81.1) Nectar 5101LB of Plumber make or equivalent
81 Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet :
-
8/6/2019 Girls Hostel Citd
49/74
8.00 each
82
8.00 each
83
8.00 each
84
10.00 sqm
85
130.00 sqm
86
120.00 mtrs
87 -55.00 sqm
88 Credit for mild steel obtained from the dismantling of the exising mumty roof.-80.00 kg
g g82.1) Bathcharge Stylish Shower of Plumber make or equivalent.
Providing and fixing Corner glass shelf with C.P brass guard bars of approveddesign and make.83.1) Elvis Make of size 230 mm
Providing and fixing CP brass towel rail 600 mm of approved quality84.1) Newdolphin 8101 of make Elvis or equivalet
Providing ans fixing stainless steel fly proof mesh for aluminium windows ofstandard quality as per the directions of the Engineer-in - charge.
Extra for laying Barcode design cermic design glazed tiles for skirting in place ofplain colour tiles.
Dismantling GI pipe and refixing the same after completion of the repair work all asdirected by the Engineer in charge.87.1) 15 mm to 40 mm nominal bore
Credit for Precoated GI Sheet obtained from the dismantling of the existing mumtyroof.
89 Providing and fixing Built in cupboard of depth 600 mm body and of required size
-
8/6/2019 Girls Hostel Citd
50/74
30.00 sqm
90
8.00 sqm
91
20.00 sqm
92
164.00 cum
CONTRACTOR
g g p p y qhaving approved shade and pattern of 1mm thick lamination on exposed outerfaces over 18mm thick plywood (9 ply) exterior grade, boiling water proof ofapproved brand ISI marked and painting on inner face of shutter, shelves and innerside box complete including CP brass butt hinges and necessary screws etc. allcomplete as per the directions of the Engineer in charge (Payment will be madeonly on surface area in elevation)
Providing and fixing dressing table with 1.30x1.40m size 5mm thick mirror with18mm ply wood backing , supported on 1.30x 0.60 x0 .60 m size box table with150mm draw provisions with all necessary draw fittings ,box table shall be made of18mm ply with 1mm thick lamination on exposed and enamel paint and putty forinside areas including 15mm teak wood beading around the mirror as per thedirection of the Engineer in charge.
Providing and fixing 18 mm thick play wood shutters with 1 mm lamination onexternal surface and painting on internal face with 2nd class teak wood beading onall sides with necessary screws etc complete (best make of approved quality)92.1) 50mm
Removal of rubbish from the work site, to outside the campus and undisputedmuncipal ground all as directed by the Engineer- in- charge.
-
8/6/2019 Girls Hostel Citd
51/74
SCHEDULE OF QUANTITIES ( Electrical)
1
1.1 Group C100 Point
2
2.1 20 mm 200 Metre
2.2 25 mm 150 Metre
3
3.1 1 or 2 module ( 75mm x 75 mm) 25 each
3.2 3 or 4 module ( 125 x 75 mm) 15 each
3.3 6 module ( 200 mm x 75 mm) 5 each
3.4 8 module ( 125 mm x 125 mm) 5 each
Supplying and fixing PVC conduit in surface/recessed including cutting the wall andmaking good the same in case of recessed conduit along with accessories andsuitable size GI switch boxes for modular switches for light point/ fan point/ exhaustfan point/ call bell point etc., complete as required.
Supplying and fixing of following sizes of PVC conduit along with accessories insurface/ recess including cutting the wall and making good the same in case ofrecessed conduit as required.
Supplying and fixing following size/ modules, GI box for modular swithces/ socketsin recess etc., as required.
CONTRACTOR
-
8/6/2019 Girls Hostel Citd
52/74
l)
-
8/6/2019 Girls Hostel Citd
53/74
ITD at Balanagar,Hyderabad.
Rate Amount
-
8/6/2019 Girls Hostel Citd
54/74
-
8/6/2019 Girls Hostel Citd
55/74
-
8/6/2019 Girls Hostel Citd
56/74
-
8/6/2019 Girls Hostel Citd
57/74
-
8/6/2019 Girls Hostel Citd
58/74
-
8/6/2019 Girls Hostel Citd
59/74
-
8/6/2019 Girls Hostel Citd
60/74
-
8/6/2019 Girls Hostel Citd
61/74
-
8/6/2019 Girls Hostel Citd
62/74
-
8/6/2019 Girls Hostel Citd
63/74
-
8/6/2019 Girls Hostel Citd
64/74
-
8/6/2019 Girls Hostel Citd
65/74
-
8/6/2019 Girls Hostel Citd
66/74
-
8/6/2019 Girls Hostel Citd
67/74
-
8/6/2019 Girls Hostel Citd
68/74
-
8/6/2019 Girls Hostel Citd
69/74
-
8/6/2019 Girls Hostel Citd
70/74
-
8/6/2019 Girls Hostel Citd
71/74
-
8/6/2019 Girls Hostel Citd
72/74
Executive EngineerHCD-III, CPWD, Hyderabad
-
8/6/2019 Girls Hostel Citd
73/74
Executive EngineerHCD-III, CPWD, Hyderabad
-
8/6/2019 Girls Hostel Citd
74/74