Glendale FRAMELESS SHOWER DOOR HINGES

The FHC Glendale Series Frameless Shower Door Hinges have a industry standard traditional design and profile for use with 3/8" to 1/2" tempered glass. Many popular finishes to select from along with custom plated finishes also available upon request. The Glendale Series Hinges are offered in four wall mount and three glass to glass mount configurations. All hinges come with a reversible 5 degree pivot pin that doesn’t require special tools for jobs that require a firmer positive position against the jamb or seal. All FHC shower door hinges are made from solid brass construction with a state of the art plating process. All internal components are stainless steel construction with no internal plastic parts.

P.O. Box 1906, South Gate, CA 90280 Toll Free: (888) 295-4531 | Fax: 323 336-8307 | Web: fhc-usa.com

MAXIMUM DOOR CAPACITY

3/8" (10 mm) GLASS 1/2" (12 mm) GLASS

WEIGHT WIDTH WEIGHT WIDTH

USING 2 HINGES 80 LBS. (36 kg) 28" (711 mm) 80 LBS. (36 kg) 28" (711 mm)

USING 3 HINGES 120 LBS. (54 kg) 32" (813 mm) 120 LBS. (54 kg) 32" (813 mm)

NOTE: Do not exceed either maximum weight or width when choosing proper quantity of hinges.

• Industry Standard Square Body Profile 3-1/2" Tall

• Designed For 3/8" – 1/2" Tempered Glazing

• Many Popular Finishes to Select Form, Custom Finishes Also Available

• Self-Centering within 15 Degrees of Closing Position

• For Use in Residential Bath and Commercial Hotel Applications

• Reversible 5 Degree Pivot Pin that Doesn’t Require Special Tools

• High Quality Solid Brass Construction with “State of the Art” Plating Process

P.O. Box 1906, South Gate, CA 90280 Toll Free: (888) 295-4531 | Fax: 323 336-8307 | Web: fhc-usa.com

ITEM NO. GLENF1Wall Mount Full Back Plate Hinge Standard Closing Position Model

ITEM NO. GLEN03Wall Mount Offset Back Plate Hinge Standard Closing Position Model

ITEM NO. GLENS2Wall Mount Short Back Plate Hinge Standard Closing Position Model

ITEM NO. GLENF5Wall Mount Full Back Plate Hinge 5 Degree Factory Set Positive Close Model

FHC Glendale Glass to Wall HingesGLENDALE FRAMELESS SHOWER DOOR HINGES

ITEM NO. GLEN180180 Degree Glass to Glass Hinge Standard Closing Position Model

ITEM NO. GLEN9090 Degree Glass and Glass Hinge Standard Closing Position Model

FHC Glendale Glass to Glass Hinges

SpecificationsGlass Sizes: 3/8" to 1/2" (10 mm to12 mm) Tempered Glass OnlyConstruction: Solid BrassClosing Type: Self-Centering When Within 15 Degrees of Closed PositionCutout Required: Specific Cutout Templates Available at fhc-usa.comIncludes: Hinge body, glazing gaskets, wall mounting screws, allen head/phillips head cover plate screws, and fabrication templateUse: Residential Bath and Commercial Hotel Applications

GASKET SPECIFICATIONS:For 3/8" (10mm) Glass: Use One Thick Gasket On Each SideFor 1/2" (12mm) Glass: Use One Thin Gasket On Each Side

MAXIMUM CAPACITY:

BRUSHED NICKEL

OIL RUBBED BRONZE

MATTE BLACK

POLISHED CHROME

Available Finishes

For Technical Support Call Toll Free in the U.S.

(888) 295-4531

Use Only Monolithic

Tempered Glass

ITEM NO. GLEN135135 Degree Glass to Glass Hinge Standard Closing Position Model

Square Profile Design

PROFESSIONAL GRADE

LIT0

067

04.2

0