global supplier info pack - ford · pdf fileglobal supplier info pack for fede-c3png...
TRANSCRIPT
Global Supplier Info Pack
For FEDE-C3PNG Integration
List of Fact sheets available
Originator: Lindsay Larcombe Page 2 of 42 Pages Established: 4th April 2002
CDS-ID: llarcom1 (Global Version 1.4.5) Revised: 10th January 2017
List of Fact sheets available
List of Fact sheets available ................................................................................................... 1
First Steps: ............................................................................................................................ 5
What is FEDE-C3PNG?............................................................................................................ 5
What is Teamcenter? ............................................................................................................. 6
GSI Overview ......................................................................................................................... 7
Global Supplier Implementation (GSI) Strategy ...............................................................................7
Teamcenter connection process steps .................................................................................... 8
FEDE-C3PNG process flow chart ............................................................................................. 9
Required for all suppliers regardless of connection type. NB. There is an extra ppt in the FSA
appendix regarding process flow for that region. ............................................................................9
Is your company registered with Covisint for the FSP? ................................................................... 12
FEDE-C3PNG Website Access................................................................................................ 13
Methods Pages Access ......................................................................................................... 13
1. Supplier Company Access ......................................................................................................... 14
2. Supplier Access Gatekeeper (SAG): ............................................................................................ 14
3. Supplier User Access: ................................................................................................................ 14
Direct Connection options - functionality comparison........................................................... 15
Direct Connection option 1:- Rich client pros & cons...................................................................... 16
NB: Rich client (not available in FSA region currently) .................................................................... 16
Direct Connection option 2:- Web client/thin client pros & cons .................................................... 17
Indirect Connection option 1:- Certified Data Service Provider (CDSP) ............................................ 18
Indirect Connection option 2:- Original Equipment Manufacturer Advantage (Syncplicity) ............. 19
FEDE-C3PNG Connectivity – how to apply ............................................................................ 20
All connection types ............................................................................................................ 20
Onsite Supplier ............................................................................................................................ 20
Catia FEDE-C3PNG downloads ............................................................................................. 21
Originator: Lindsay Larcombe Page 3 of 42 Pages Established: 4th April 2002
CDS-ID: llarcom1 (Global Version 1.4.5) Revised: 10th January 2017
FEDE-C3PNG Software Packages .......................................................................................... 21
Dassault Systemes ........................................................................................................................ 21
Theorem ...................................................................................................................................... 21
FEDE-C3PNG Software Packages .......................................................................................... 22
Siemens PLM Software – Rich client .............................................................................................. 22
FEDE-C3PNG Software Packages .......................................................................................... 23
Siemens PLM Software – Thin client.............................................................................................. 23
FEDE-C3PNG Capability........................................................................................................ 23
Hardware Contacts ....................................................................................................................... 23
Software Contacts ........................................................................................................................ 23
See appendices for Regional FEDE-C3PNG Sales Contacts ..................................................... 23
FEDE-C3PNG Supplier Integration Data Flow ........................................................................ 24
FEDE-C3PNG Competency – Flow chart ................................................................................ 25
FEDE-C3PNG Driving Licence Process [FOE only] ............................................................................ 25
FEDE-C3PNG Competency - Training .................................................................................... 26
Training requirements for FEDE-C3PNG Driving Licence [FOE only] ................................................ 26
Acronyms ............................................................................................................................ 27
Appendix A – GSI Contacts and region specific information in the Ford Asia Pacific [FAP]
region ................................................................................................................................. 28
FEDE-C3PNG Sales Contacts FAP – Siemens PLM Software ............................................................ 29
FEDE-C3PNG Sales Contacts FAP – Dassault Systemes ................................................................... 29
FEDE-C3PNG Sales Contacts FAP – Theorem ................................................................................. 30
FEDE-C3PNG Training contacts in FAP........................................................................................... 30
Appendix B – GSI Contacts and region specific information in the Ford of Europe [FoE] region
........................................................................................................................................... 31
FEDE-C3PNG Sales Contacts FoE –Siemens PLM Software ............................................................. 32
FEDE-C3PNG Sales Contacts FoE – Dassault Systemes ................................................................... 33
Originator: Lindsay Larcombe Page 4 of 42 Pages Established: 4th April 2002
CDS-ID: llarcom1 (Global Version 1.4.5) Revised: 10th January 2017
FEDE-C3PNG Sales Contacts – Theorem ........................................................................................ 33
FEDE-C3PNG Training contacts in FoE ........................................................................................... 34
Appendix C– GSI Contacts and region specific information in the Ford North America [FNA] region 35
FEDE-C3PNG Sales Contacts FNA –Siemens PLM Software ............................................................. 36
FEDE-C3PNG Sales Contacts FNA – Dassault Systemes ................................................................... 36
Appendix D– GSI Contacts and region specific information in the Ford South America [FSA]
region ................................................................................................................................. 37
FEDE-C3PNG Sales Contacts FSA – Siemens PLM Software ............................................................. 38
FEDE-C3PNG Sales Contacts FSA – Dassault Systemes .................................................................... 39
FEDE-C3PNG Process Flow FSA ..................................................................................................... 39
Official CDSP FSA .......................................................................................................................... 40
FEDE-C3PNG Training information for FSA .................................................................................... 41
Revision .............................................................................................................................. 42
Originator: Lindsay Larcombe Page 5 of 42 Pages Established: 4th April 2002
CDS-ID: llarcom1 (Global Version 1.4.5) Revised: 10th January 2017
First Steps: This guide is to assist you in exchanging data with Ford, however please do not purchase any software
licences until you have spoken to your local GSI team. (See appendices for contact details). We will
assist in project managing and advising you of the best licence option for your Ford business needs.
What is FEDE-C3PNG? FEDE-C3PNG is the Ford corporate strategy for CAD (Computer Aided Design), CAM (Computer Aided
Manufacturing), CAE (Computer Aided Engineering) and PIM (Product Information Management). PIM is
also known as PLM (Product Lifecycle Management). FEDE-C3PNG (Ford Engineering Design
Environment-C3P Next Generation) delivers the next generation of digital product capabilities for all
brand partners in Ford Motor Company to effectively conduct enterprise-wide vehicle and technology
product creation. This will be achieved by the use of the Teamcenter Engineering PLM system.
The key elements of FEDE-C3PNG are to:
Enable the integration of the Ford global extended enterprise (Ford and suppliers),
Unify CADCAM practices across the Ford extended enterprise and provide efficient information flow between CAD/CAM/CAE environments through PIM.
How does FEDE-C3PNG contribute to Reduced Time to Market?
FEDE-C3PNG supports concurrent engineering, which allows styling, packaging, design and manufacturing studies to take place in parallel,
A common PIM environment reduces the large amount of non-value added time spent in locating and communicating information.
How does FEDE-C3PNG affect Quality?
The use of a common system facilitates the sharing of product data, minimising errors / problems caused by outdated information,
Advanced functionality of FEDE-C3PNG provides tools to support a digital buck where package and assembly problems can be identified and corrected early in the design phase,
FEDE-C3PNG integrates complete engineering analysis with the design process.
Originator: Lindsay Larcombe Page 6 of 42 Pages Established: 4th April 2002
CDS-ID: llarcom1 (Global Version 1.4.5) Revised: 10th January 2017
What is Teamcenter?
Teamcenter is Ford’s current choice of Product Lifecycle Management (PLM) software, providing a single repository for the development of product data.
Teamcenter comprises of a number of integrated applications which can be used to manage the information required to design, manufacture and support a product through its lifecycle. Through this, it enables OEM’s, partners and suppliers to work collaboratively and access product data securely.
Benefits of Teamcenter include:
Management of multi CAD data
Data reuse between different product structures
Eliminate duplication data
Simplify retrieval of data
Provide revision control to ensure access to latest data
Establish relationships between requirements, specifications and parts
Provide access control and vaulting to ensure data integrity
View configurable product structures
Provides an embedded visualisation application allowing CAD data to be viewed without the need of a CAD environment
Define and manage variant definitions
Originator: Lindsay Larcombe Page 7 of 42 Pages Established: 4th April 2002
CDS-ID: llarcom1 (Global Version 1.4.5) Revised: 10th January 2017
GSI Overview
Global Supplier Implementation (GSI) Strategy
Ford Motor Company has teams of experienced professionals to assist in the understanding of the tools:
o Ford GSI`s; o Partners – Siemens & Dassault Systemes;
For contact information please see the appendix relevant for your area.
The GSI teams are focused on specific Ford vehicle and Powertrain programs and work with Ford authorized suppliers on a global basis to implement FEDE-C3PNG The mission of the GSI teams is to provide technical, process and business consultancy and enable:
FEDE-C3PNG supplier implementation to facilitate data exchange within the Ford Extended Enterprise; o Helps suppliers deliver quality FEDE-C3PNG data to the programs; o Reduces costs associated with the product development process; o Enables the reduction in product development lead-times.
FEDE-C3PNG readiness by providing assistance being a Single Point Of Contact (SPOC) and help to remove roadblocks in all the following areas:
Capability o Software o Hardware
Connectivity o Secure connection into Ford via approved FEDE-C3PNG Network solutions
Competency o Training (Design, PIM) o FEDE-C3PNG Competency checks o FEDE-C3PNG Driving licence
Continuing collaboration o Methods o Process changes o Upgrades o Ask the Expert Sessions
Consultancy o Ford Processes – (i.e., FSP, Exhibit G, CAD-CAM connection, Teamcenter connection) o Project Management o Business consultancy
Originator: Lindsay Larcombe Page 8 of 42 Pages Established: 4th April 2002
CDS-ID: llarcom1 (Global Version 1.4.5) Revised: 10th January 2017
Teamcenter connection process steps
Please review the following information which will allow you to step through many of the process steps
independently.
If you are not sure if you have a Global Supplier DataBase [GSDB
code] or you are not sure what it is
Contact the GSI team (details
in the appendices)
If you have a GSDB code but do not know if you have access to the
Ford Supplier Portal [FSP] (page 12)
Go to Step_1
If you have access to the Covisint hosted FSP (page 12) Skip to Step_2
If you have already identified your FSN ID and set a reminder to
change the password (page 13)
Skip to Step_3
If you have access to the FSP and to the FEDE-C3PNG website (page
13)
Skip to Step_4
If you have access to the above systems and your company is
available but not set up in UARS (page 14)
Skip to Step_5
If you have access to the FSP, FEDE-C3PNG site and the User Access
Request System [UARS] (page 14)
Skip to Step_6
If you have access to all the above systems and to the methods
SharePoint (page 10)
Skip to Step_7
If you have access to all the above systems and are using the
appropriate Catia level, start parts etc. (page 11)
Skip to Step_8
Originator: Lindsay Larcombe Page 9 of 42 Pages Established: 4th April 2002
CDS-ID: llarcom1 (Global Version 1.4.5) Revised: 10th January 2017
FEDE-C3PNG process flow chart
Required for all suppliers regardless of connection type. NB. There is an extra ppt in the
FSA appendix regarding process flow for that region.
Step 1 Use your Ford 5 digit GSDB code to
get access to the Ford Supplier Portal,
accessed through Covisint. Information
here https://web.c3p.ford.com/start/
Further details on page 12 FSP
Step 2 Login to the FSP
https://fsp.portal.covisint.com/web/
portal/home to retrieve your FSN ID
and change the password. You will
need this ID for logging into
Teamcenter and other Ford systems.
Make sure you reset both your FSN
and Covisint/FSP passwords every 90
days. Put a reminder in your
calendar!!
Step 3 Gain access to the FEDE-
FEDE-C3PNG website
https://web.c3p.ford.com/ .
Further details on page 13
Step 4 Ask the GSI team to check you
have “Exhibit G status” This ensures your
company will be available in our UARS
system and it will give a s supplier code
entry for data naming and numbering
purposes
Originator: Lindsay Larcombe Page 10 of 42 Pages Established: 4th April 2002
CDS-ID: llarcom1 (Global Version 1.4.5) Revised: 10th January 2017
1. Yellow highlighted form – Company request
2. Form in red outline – SAG request
3. Form in green outline – User request
Step 5 Request access to
Teamcenter using the 3
step process described on
page 14 TC_access Full
forms here
https://www.nguams.ford.
com/UarsUiWeb/user/Ford
InternalRequest.faces?dswi
d=-842
Step 6 Ensure you can access
the methods sharepoint site.
There is a wealth of useful
information here
https://team.extsp.ford.com/sit
es/C3PNGMethods/C3PNGMeth
ods.html
Originator: Lindsay Larcombe Page 11 of 42 Pages Established: 4th April 2002
CDS-ID: llarcom1 (Global Version 1.4.5) Revised: 10th January 2017
Step 8 In consultation
with Ford GSI and adhering
to the requirements of your
E-SOW [Engineering
statement of Work] choose
the method of connectivity
best suited for working
with Ford. Further details
begin on page 16
Connection options
For complete
information on
FEDE-C3PNG
connectivity
please contact
your GSI team.
Please note that
other types of
CAD data
exchange, i.e.
DVD, USB media, portable hard drives, FTP, Odette, supplier owned exchange system etc
are not permitted by Ford for FEDE-C3PNG data exchange. That concludes the high level
flow chart of process steps to access data inside Ford. Full details follow on these process
steps. You now need to choose your connection type, more details on page 16.
Connection type FEDE-C3PNG
Direct Connect (2Mbit PI-VPN or ENX link)
Teamcenter Engineering Rich Client
(can also be called Portal Client)
Direct Connect (2Mbit PI-VPN or ENX link)
Teamcenter Engineering Web Client
(can also be called Thin Client)
Indirect Connect CDSP (Certified Data Service
Provider)
Indirect Connect Syncplicity
Step 7 Download
appropriate Catia
information, start parts,
drawing frames etc
https://web.c3p.ford.com
/downloads/CATIAV5.htm
l
Originator: Lindsay Larcombe Page 12 of 42 Pages Established: 4th April 2002
CDS-ID: llarcom1 (Global Version 1.4.5) Revised: 10th January 2017
Ford Supplier Portal (FSP) Web Site Access
The Ford Supplier FEDE-C3PNG Website https://web.C3P.ford.com is password protected. How to Gain
Access:
Is your company registered with Covisint for the FSP?
Yes – Go to https://portal.covisint.com/portal/public/_l:en/tp/ Click on the ‘Ford Blue Oval' then follow
the process for ‘Registering a New User for FSP’. Should you have difficulties, there are guidance
documents to be found on the link above under 'New to FSP'.
No - Go to https://portal.covisint.com/portal/public/_l:en/tp/fsp Click on the link next to 'Register for
FSP' and then follow the process for 'New Top Level Organisation'. You must accept the Company
Security Administrator (CSA) role if you are registering a new organisation. You will need the Ford Global
Supplier Database (GSDB) Site code when registering a new organisation. A guidance document on FSP
registration can be found at https://web.fsp.ford.com/FSP/desk_manual/NAV2222G.htm If you have
problems, or want to find out your site code, please contact the GSI team.
If you are a Tier 2 Supplier and have no direct contract to Ford but are subcontracted to another
supplier, you need to apply as a 'Top level organisation' with Covisint in the normal way but you should
put your Tier 1 supplier's code in as your site code (unless you already have a Ford site code of your
own).
Originator: Lindsay Larcombe Page 13 of 42 Pages Established: 4th April 2002
CDS-ID: llarcom1 (Global Version 1.4.5) Revised: 10th January 2017
FEDE-C3PNG Website Access
You must have an FSP user ID to access this website.
1. Go to https://portal.covisint.com/portal/public/_l:en/tp/fsp and login entering User ID and
Password in the boxes on the left hand side.
2. The Ford Supplier Portal home page displays. Click Administration tools (at the left of the page)
3. In the left column, click request a service package.
4. Click request sub-package. (Under the Ford Supplier Portal)
5. Identify the desired service package and tick the check box next to that service. In this case you need
FEDE-C3PNG. You can always access other applications when required from the list supplied.
6. Verify the service package request and click (continue).
7. Select the appropriate site code(s) by clicking in the check box and click (continue).
8. Note: Not all applications require site codes. Therefore, this screen may not always appear.
9. Your request has been successfully submitted.
Methods Pages Access Once you have access to the FSP you can access the Ford FEDE-C3PNG methods pages. It is highly
recommended that you bookmark this link.
Link to FEDE-C3PNG Methods site:
https://team.extsp.ford.com/sites/C3PNGMethods/C3PNGMethods.html?id?id=341059
This site contains Ford CAD methods and processes specific to the Corporate Business Groups such as
Body, Chassis, PTO, Electrical, etc. and includes Ford Engineering CAD Drafting Standards (FECDS) as well
as useful information regarding Catia and Ford Teamcenter applications.
Originator: Lindsay Larcombe Page 14 of 42 Pages Established: 4th April 2002
CDS-ID: llarcom1 (Global Version 1.4.5) Revised: 10th January 2017
TC Access Request
You must have FSP and FEDE-C3PNG website access to access these links. The User Access Registration
System process for suppliers is divided into three segments:
1. Request Access for the Supplier Company [select company tab]
https://www.nguams.ford.com/UarsUiWeb/user/FordInternalRequest.faces?dswid=-842
2. Identify / Request a Supplier Access Gatekeeper [select SAG tab from the url above]
3. Individual Supplier Users Request Access [select user tab from the url above]
1. Supplier Company Access: When a supplier (also known as a ’TC Group’) needs to work with a
program, and has staff trained in TC, the supplier can submit a Company Access request. It is only
necessary to submit one company request per carline regardless of how many users need access.
IMPORTANT: After the company's request is approved by a Ford Authorizer the supplier designated user
can submit Supplier Access Gatekeeper request if required. Please be aware the Ford Authorizer must
be Ford Management level, LL6 or better. One example of a Ford Authorizer would be a PMT Leader, or
a CAD supervisor. Please note the LL6 cannot be a Joint Venture employee, they must be Ford staff.
2. Supplier Access Gatekeeper (SAG): The Supplier Access Gatekeeper is responsible for processing all
end-user requests for a company. There can be one or more access gatekeepers for a company. Once
approved by CDX Admin, the Supplier Access Gatekeeper can process requests for all Program requests
for a company. If there is more than one Supplier Access Gatekeeper the Supplier Access Gatekeeper's
description can be used to guide users to select the proper SAG. SAG's are not required to have TC
access, they can process TC user requests without a TC account. SAG’s are responsible for checking that
users they approve for access have undertaken the required TC training. If the system states that that
‘no Teamcenter Training records can be found’ but you know that they have completed training, do not
proceed with approving the UARS request until proof is provided to the PLM Security team with the
request that they add the information to the global trained user list. (Leena Rao, Holger Teermann and
Ken Moss). [[email protected], [email protected] , [email protected]]. Step 2 only needs to be
repeated when an additional SAG needs to be identified for your Company.
3. Supplier User Access: Once Supplier Company Access is approved and a Supplier Access Gatekeeper is
established, then Supplier users (a.k.a. - “Requestors”) can submit access requests for TC, providing they
have completed TC training. View the documentation within the “UARS for Requestors” button to view
the specific steps associated with this portion of the process. The full TC access process documentation
is available under ‘TC access and security’ in the methods pages url
https://team.extsp.ford.com/sites/C3PNGMethods/C3PNGMethods.html?id=119539
Originator: Lindsay Larcombe Page 15 of 42 Pages Established: 4th April 2002
CDS-ID: llarcom1 (Global Version 1.4.5) Revised: 10th January 2017
Direct Connection options - functionality comparison
Teamcenter Web Client Teamcenter Rich Client
Teamcenter Functionality FMS4066 FMS4060 + FMS4063
Manage Product structures
Receive Envelopes
Send Envelopes ×
View Manufacturing structures ×
Manage Classification ×
Revision compare in SM ×
Subscription ×
CAD data export
Zip file download
Export parts /small assemblies
Export of large assemblies Limited (very time consuming)
Data export from SM ×
Cache for CAD data ×
CAD data check in
Zip file upload (though no official method yet) (though no official method yet)
Check in without onsite resident ×
JT data
View JT (using local Vis)
Export single JT locally
Additional Tc Vis licenses No
Tc Vis
Tc Vis
Pro Plus
TC20615
Tc Vis
Mockup
VS20530
No
Tc Vis
Tc Vis
Pro Plus
VS21100
Tc Vis
Mockup
VS20530
Save assembly JT locally × ×
Ability to create session packages × ×
3D dynamic cross sectioning × ×
Clearance analysis × × × ×
Part motion capture and playback × × × ×
Originator: Lindsay Larcombe Page 16 of 42 Pages Established: 4th April 2002
CDS-ID: llarcom1 (Global Version 1.4.5) Revised: 10th January 2017
Direct Connection option 1:- Rich client pros & cons
NB: Rich client (not available in FSA region currently)
Teamcenter
Rich Client
Pros Cons
Ability to access high data of volume efficiently (local caching) Requires specific TC training at a
cost to the supplier
Supplier would be responsible for CAD work and data
management
Higher cost of ownership
regarding software, specific
hardware
Supplier can work collaboratively with program CAD data Not available in all global areas
depending on network latency
TC is accessible globally by suppliers upon demand
Supplier has access to the latest CAD data – WIP or released
versions
Supplier can be automatically notified when data is
updated/changes
All working methods are available on the methods SharePoint to
provide support
Supplier has access to lightweight context (JT) data
Supplier has immediate access to complete program lightweight
data via Quick Launch files
Most interactive method of exchanging Data with Ford
PPM releasing available
No need for expensive onsite resource
Originator: Lindsay Larcombe Page 17 of 42 Pages Established: 4th April 2002
CDS-ID: llarcom1 (Global Version 1.4.5) Revised: 10th January 2017
Direct Connection option 2:- Web client/thin client pros & cons
Teamcenter
Web Client
Pros Cons
Supplier would be responsible for CAD work and data
management
Slightly higher cost of ownership,
software,
Supplier can work collaboratively with program CAD data Cumbersome to work with
multiple CAD parts
TC is accessible globally by suppliers upon demand Requires onsite resource to
‘round trip’ the CAD data
Supplier has access to the latest CAD data – WIP or released
versions
Requires specific TC training at a
cost to the supplier unless only
viewer role required
All working methods are available on the methods SharePoint to
provide support
Supplier has access to lightweight context (JT) data
Supplier has immediate access to complete program lightweight
data via Quick Launch files
PPM releasing available
Globally available
Originator: Lindsay Larcombe Page 18 of 42 Pages Established: 4th April 2002
CDS-ID: llarcom1 (Global Version 1.4.5) Revised: 10th January 2017
Indirect Connection option 1:- Certified Data Service Provider (CDSP)
CDSP
Pros Cons
CDSP provides support to ensure a smooth transition of data Cost of ownership, supplier may
need to purchase specific
software
Supplier has the potential of working in any software package
where the CDSP will convert accordingly
Supplier is reliant on CDSP
providing context data when
required
CDSP responsible for data management on behalf of the supplier Potential escalating costs if data
volume or frequency increases
All working methods are available on the methods SharePoint to
provide support
Supplier can become
disconnected from Ford
engineers and the business
Globally available
CDSP tailors costs according to amount and frequency of data
CDSP can assist with CAD design and /or design verification
[though this activity is not certified by Ford, only the connection
requirements are certified by Ford]
Originator: Lindsay Larcombe Page 19 of 42 Pages Established: 4th April 2002
CDS-ID: llarcom1 (Global Version 1.4.5) Revised: 10th January 2017
Indirect Connection option 2:- Original Equipment Manufacturer
Advantage (Syncplicity)
Syncplicity
Pros Cons
Low cost of ownership Onsite supplier or Ford resource required
for supplier data management
All working methods are available on the methods
SharePoint to provide support
https://team.extsp.ford.com/sites/C3PNGMethods/C
3PNGMethods.html?id=790868
Data delivered by supplier needs
checking onsite
Easy to use Inefficient method of working and can
cause delays to the business
Globally available Reliant on onsite resource to provide
contextual data
Local ‘staging’ or temp area required to
store data pre-transfer to Ford and
within Ford prior to TC save
Supplier needs to manage data locally to
ensure consistency when transferring
data between sites
Originator: Lindsay Larcombe Page 20 of 42 Pages Established: 4th April 2002
CDS-ID: llarcom1 (Global Version 1.4.5) Revised: 10th January 2017
FEDE-C3PNG Connectivity – how to apply
All connection types
Please contact your local GSI team [FOA, FOE, FNA, FSA] via the contacts in the appendices and we will
kick off an implementation once we have discussed with you which is the best fit for you to provide the
appropriate carline support.
Onsite Supplier
If you have been asked to work on a Ford site and/or you need to provide your own hardware and
software licenses please contact your local GSI team for further details.
Originator: Lindsay Larcombe Page 21 of 42 Pages Established: 4th April 2002
CDS-ID: llarcom1 (Global Version 1.4.5) Revised: 10th January 2017
Catia FEDE-C3PNG downloads You can get a variety of CATIA downloads here https://web.c3p.ford.com/downloads/CATIAV5.html
FEDE-C3PNG Software Packages
Dassault Systemes
FEDE-C3PNG CATIA V5 Solution Seats
Full information about the current Catia configurations suitable for use with Ford can be found here
https://web.c3p.ford.com/release/SER2_5/files/2015-16_Ford-
DS_Supplier_Update.FINAL.EFR.110415.pdf
Catia Hot fix
You can access the latest Ford Hot fix patch levels for Catia here http://www.3ds.com/support/ You will
need to register with Dassault to obtain these downloads.
Theorem
Theorem JT to V5 Translator
The JT to CATIA V5 product directly converts JT data into CATIA V5.JT data created from . This is
accomplished by importing the TCVis native data [JT files] into CGR, CATShape or CATIA V5 part files
(CATPart). The product can also handle PMI (Product Manufacturing Information).
To contact Theorem for purchasing and downloading information please visit:
http://www.theoremsolutions.com/cgi-bin/ford_supplier.pl?lksAhmnoO0ckl=ksadfkj
Originator: Lindsay Larcombe Page 22 of 42 Pages Established: 4th April 2002
CDS-ID: llarcom1 (Global Version 1.4.5) Revised: 10th January 2017
FEDE-C3PNG Software Packages
Siemens PLM Software – Rich client
FEDE-C3PNG Direct Connectivity Solutions for Ford Suppliers
Siemens PLM Software have developed, in conjunction with Ford, the Teamcenter Remote Client to
support direct Ford supplier connectivity and collaboration in the context of FEDE-C3PNG.
Siemens PLM Software recommends that each Teamcenter Remote Client has access to a minimum of
2Mbit dedicated bandwidth.
Teamcenter Remote Client Product Bundles
Teamcenter Rich Client (best interaction with Teamcenter)
FMS4060 – Teamcenter Remote Client Base
Teamcenter Author
Teamcenter Visualization Mockup (embedded)
Change Management Author
Classification Author
Context Management Author
Product Configuration Author
Requirements / Systems Architect Access
Teamcenter Manufacturing Access
Multi-site Collaboration
Ford FEDE-C3PNG Toolkit
FMS4063 – Teamcenter Remote Client for CATIA
Requires: FMS4060 Teamcenter Remote Client Base
Teamcenter Integration for CATIA
OR
Originator: Lindsay Larcombe Page 23 of 42 Pages Established: 4th April 2002
CDS-ID: llarcom1 (Global Version 1.4.5) Revised: 10th January 2017
FEDE-C3PNG Software Packages
Siemens PLM Software – Thin client
Teamcenter Web Client / Thin Client (basic interaction with Teamcenter)
FMS4066 – Teamcenter Remote Engineering Web Client
Teamcenter User Seat
Named User Licenses provide access to Ford Teamcenter for 1 named user.
Named User Licenses apply to all Ford Teamcenter licenses, FMS306X
Named User ID’s and Passwords are obtained from Ford.
Named User ID’s and Passwords cannot be shared between users (Ford data security policy)
Please contact your Siemens sales representatives for further information (see appendices for
Regional FEDE-C3PNG Sales Contacts – Siemens PLM software”).
FEDE-C3PNG Capability
For a list of recommended Supplier FEDE-C3PNG Hardware & System Software please use this link: - https://web.c3p.ford.com/release/SER3/files/FEDE_C3PNG_SER3.0_hwss.pdf;
- https://team.extsp.ford.com/sites/C3PNGMethods/C3PNGMethods.html?id=828840;
Hardware Contacts
Hewlett Packard http://www.hp.com/
Dell http://www.dell.com/
Software Contacts
See appendices for Regional FEDE-C3PNG Sales Contacts
Originator: Lindsay Larcombe Page 24 of 42 Pages Established: 4th April 2002
CDS-ID: llarcom1 (Global Version 1.4.5) Revised: 10th January 2017
FEDE-C3PNG Supplier Integration Data Flow
Direct method
Indirect method
Supplier FORD
Capitol
Server
Syncplicity
Teamcenter Vault Server
Oracle Server
Teamcenter Portal
CATIA Manager
Sponsor
CATIA
Teamcenter Portal
CATIA Manager
Designer/Data Coordinator
CATIA
FOR
D Firew
all
Sup
plier Firew
all
File Based
Server
CATIA Designer
CATIA Designer
File Based
Server
CATIA Designer
CATIA Designer
Originator: Lindsay Larcombe Page 25 of 42 Pages Established: 4th April 2002
CDS-ID: llarcom1 (Global Version 1.4.5) Revised: 10th January 2017
FEDE-C3PNG Competency – Flow chart
FEDE-C3PNG Driving Licence Process [FOE only]
A C3P Driving License is a C3P
user competency certification
for suppliers, which informs
about the competency status
of an individual user.
The competency status reflects
the training requirements
given by several Ford
departments.
The Driving License helps to
decrease the huge effort for
Ford regarding cleaning up /
restoring of data respective to
iterative requests and time
consuming communications to
suppliers.
In the C3P Driving License
Process, GSI verifies the
competency of every supplier’s
users TC access request. GSI
checks their training
certificates against the stated
Ford Department
requirements and log the
results on its database
informing the Ford
Department if there is a
mismatch.
For information or questions
to the Driving License process
please contact your GSI team.
A FEDE-C3PNG Driving License
is a FEDE-C3PNG user
competency certification for
suppliers, which informs about
the competency status of an
individual user.
The competency status reflects
the training requirements
given by several Ford
departments.
The Driving License helps to
decrease the huge effort for
Ford regarding cleaning up /
restoring of data respective to
iterative requests and time
consuming communications to
suppliers.
In the FEDE-C3PNG Driving
License Process, GSI verifies
the competency of every
supplier’s users TC access
request. GSI checks their
training certificates against the
stated Ford Department
requirements and log the
results on its database
informing the Ford
Department if there is a
mismatch.
For information or questions
to the Driving License process
please contact your GSI team.
FEDE-C3PNG Process
Originator: Lindsay Larcombe Page 26 of 42 Pages Established: 4th April 2002
CDS-ID: llarcom1 (Global Version 1.4.5) Revised: 10th January 2017
FEDE-C3PNG Competency - Training
Training requirements for FEDE-C3PNG Driving Licence [FOE only]
Catia V5 certificates will only be accepted when issued by the Ford Training centre or by certified
Dassault Systems Training partners. http://www.3ds.com/education/find-an-education-partner/
Only training provided by a Ford Training centre will be accepted for Teamcenter and specific Ford Catia
methods.
GSI recommend that Releasing training be undertaken by any supplier needing to understand and use
the CAD releasing process. Highly recommended too are courses in Teamcenter buck [1 – 2 hours],
Teamcenter viewer [1 – 2 hours] & CDV training [½ day] which are of use and will explain new concepts.
Some of these courses may be done online without charge.
Firstly login to the FSP, then check the Ford supplier learning institute on the PD tab for additional
details. www.learning.ford.com Search for “web based training” to locate online courses, or use the
contacts given in the appendices for your region.
The registration of suppliers onto the Ford classes will be conducted by the authorised training suppliers
to Ford Globally i.e. Siemens PLM Software and Dassault Systems.
Originator: Lindsay Larcombe Page 27 of 42 Pages Established: 4th April 2002
CDS-ID: llarcom1 (Global Version 1.4.5) Revised: 10th January 2017
Acronyms ANX Automotive Network eXchange C3P CAD / CAM / CAE (C3) & PIM (P) FEDE-C3PNG Ford Engineering Design Environment-C3P Next Generation
PDM system ( Teamcenter engineering) allowing multiple CAD systems (FEDE-C3PNG CATIA V5)
CAD Computer Aided Design CAE Computer Aided Engineering CAM Computer Aided Manufacturing CDSP Certified Data Service Provider CDV Configured Digital Vehicle CDX CAD Data Exchange CSA Corporate Security Administrator DIT Data Integrity Testing EIC End Item Configuration EMEA Eastern Europe, Middle East and Asia ENX European Network Exchange ExG Exhibit G FEA Finite Element Analysis FPO Ford Program Office FPS Ford Production Systems FSN Ford Supplier Network FSP Ford Supplier Portal GPDS Global Product Development System GSEC Global Supplier Electronic Communications GSI Global Supplier Implementation KBE Knowledge Based Engineering MDA Mechanical Design Automation PDM Product Data Management PIM Product Information Management PI-VPN Public Internet – Virtual Private Network PKM Product Knowledge Management PLM Product Lifecycle Management SAG Supplier Access Gatekeeper SCC Supplier Collaboration Center SERx System Engineering Release x SVC Small & Medium Vehicle Centre TC Teamcenter Unified Architecture UAMS User Access Management System VAR Value Added Reseller VPN Virtual Private Network WIP Work in Progress
Originator: Lindsay Larcombe Page 28 of 42 Pages Established: 4th April 2002
CDS-ID: llarcom1 (Global Version 1.4.5) Revised: 10th January 2017
Appendix A – GSI Contacts and region specific information in
the Ford Asia Pacific [FAP] region Key contact information for personnel engaged in Supplier FEDE-C3PNG deployment.
GSI Team Ford Telephone Number E-Mail Address Role/Responsibility
Jenny Lee +61 3 8359 4091 [email protected] Ford Australia & AP region
Jorbin Wang
xwang130@
ford.com
+86-25-84922151 [email protected] Ford China
Sophia Su.
[email protected], Tel:
+86 25 84922837.
+86 25 84922837. [email protected], Ford AP Training Contact
AP GSI Team [email protected] Generic AP GSI email
FNA CDX IT Team [email protected] Generic FNA CDX IT email
Originator: Lindsay Larcombe Page 29 of 42 Pages Established: 4th April 2002
CDS-ID: llarcom1 (Global Version 1.4.5) Revised: 10th January 2017
FEDE-C3PNG Sales Contacts FAP – Siemens PLM Software
Please use the link below to search for a Siemens VAR/Reseller in your country for specific information
about Teamcenter Engineering. Read pages 21 & 22 (Siemens PLM Software - Rich Client & Thin/Web
Client) for license information or contact [email protected] for assistance. Please note this is not an out
of the box solution but a Ford specific version:
http://www.plm.automation.siemens.com/en_us/partners/find_partner.cfm
Competency = Channel Sales (VAR/Reseller)
Product Line = Teamcenter
FEDE-C3PNG Sales Contacts FAP – Dassault Systemes
Please contact the following personnel for information on CATIA V5. Please note that these contacts will
have information on the specific load required for Ford:
Country Contact Phone Email
Asia Pacific JC Lee +613 9274 2205 [email protected]
Originator: Lindsay Larcombe Page 30 of 42 Pages Established: 4th April 2002
CDS-ID: llarcom1 (Global Version 1.4.5) Revised: 10th January 2017
FEDE-C3PNG Sales Contacts FAP – Theorem
To contact Theorem for purchasing and downloading information please visit:
http://www.theoremsolutions.com/cgi-bin/ford_supplier.pl?lksAhmnoO0ckl=ksadfkj
Or contact directly:
Country Contact Phone Email
Australia
China
Japan
Thailand
Taiwan
Richard Scales +44 (0) 1827 300669 [email protected]
India Clair Robinson +44 (0) 1827 300668 [email protected]
South Africa John Young +44 (0) 1827 300667 [email protected]
FEDE-C3PNG Training contacts in FAP
The training of suppliers will take place at Ford Training sites in Australia, China and India. For
classroom-based training in the Asia Pacific region contact: Sophia Su. [email protected] +86 25 84922837.
Originator: Lindsay Larcombe Page 31 of 42 Pages Established: 4th April 2002
CDS-ID: llarcom1 (Global Version 1.4.5) Revised: 10th January 2017
Appendix B – GSI Contacts and region specific information in
the Ford of Europe [FoE] region Key contact information for personnel engaged in Supplier FEDE-C3PNG deployment.
GSI Team Ford Telephone Number E-Mail Address Role/Responsibility
Lindsay Larcombe +44 1268 40 6112 [email protected] Ford Dunton
Timm Hölterhoff +49 221 903 3353 [email protected] Ford Merkenich
Andrew Watson +44 208 526 6585 [email protected] Ford Dagenham - PTO
Saud Kelifa +49 -221 -903 3352 [email protected]
Ford Merkenich - methods
Whole Team [email protected] Generic GSI email address
GSI Team Siemens PLM
Olaf Nielsen +49 2064 4288290
9037567
FoE GSI Technical Support
GSEC (Global Supplier
Electronic
Communications)
Telephone Number Fax Number E-Mail Address
GSEC-GB (Rest of Europe) send e-mail +44 1268 703696 [email protected]
FEDE-C3PNG Siemens Helpdesk Telephone Number Website
Germany +49 221 20802 222
http://support.industrysoftware.automation.siemens.com
Report an Issue / Product: FEDE-C3PNG
- Inquire the Status of an Issue
UK +44 1276 702111
Austria +43 732 377 550
Bénélux +32 2 709 56 66
China +800 810 1970
Denmark +45 70 10 19 48
France +33 1 30 67 71 11
India +1800 102 4822
Italy +39 02 210 571
Netherlands +31 73 680 25 43
Poland +48 22 5163090
Spain +34 900 354 119
Sweden +46 8 506 990 80
Switzerland +41 1 755 7282
Originator: Lindsay Larcombe Page 32 of 42 Pages Established: 4th April 2002
CDS-ID: llarcom1 (Global Version 1.4.5) Revised: 10th January 2017
FEDE-C3PNG Sales Contacts FoE –Siemens PLM Software
Please contact the following personnel for information on Teamcenter Engineering. Please note this is
not an out of the box solution but a Ford specific version:
Country Contact Phone Email
Austria Franz Haider +43 732 37755 011 [email protected]
Czech Republic Mike Robinson +44 1462 445 000 [email protected]
Estonia, Latvia,
Lithuania, Hungary,
Slovenia, Slovakia,
Serbia, Bosnia &
Herzogovina
Paul Cleverley +44 1276 702035
Finland Mikael Fant +46 8 506 990 31 [email protected]
France Thomas Chevallier +33 1 30 67 01 22 [email protected]
Germany Harald Loesch +49 221 20802 640 [email protected]
Hungary Colin Johnson +44 1276 702 026 [email protected]
Italy Alberto Vittori +39 011 902 9800 [email protected]
Netherlands John Holweg +31 73 6802 518 [email protected]
Nordic Mats Friberg +46 8 506 990 02 [email protected]
Poland Mariusz Zabielsk + 48 22 339 36 80 [email protected]
Russia Heinz Melus +75 01 2582 246 [email protected]
Spain Carmen López +34 93 510 22 38 [email protected]
Switzerland Alexander Beck +41 44 7557 205 [email protected]
United Kingdom James Mansfield +44 1462 445099 [email protected]
Originator: Lindsay Larcombe Page 33 of 42 Pages Established: 4th April 2002
CDS-ID: llarcom1 (Global Version 1.4.5) Revised: 10th January 2017
FEDE-C3PNG Sales Contacts FoE – Dassault Systemes
Please contact the following personnel for information on CATIA V5. Please note that these contacts will
have information on the specific load required for Ford:
Country Contact Phone Email
Austria, Czech Republic, Hungary, Poland, Germany, Slovakia, Switzerland
Klaus Gehring +49 711 2730 0102 [email protected]
Croatia, Romania, Slovenia,
Marek Gawecki +43 122 707 154 [email protected]
Finland Mara Holmberg +46 3 1720 5893 [email protected]
France Eric Halle +33 1 616 28851 [email protected]
Italy Luigi Brivio +39 023 3430 6274 [email protected]
Netherlands Rory Gray +44 7966 531908 / +44
7917 390538 [email protected]
Spain Eric de Perthuis +34 9 3551 0808 [email protected]
United Kingdom Greg Owen +44 2476 857 436 [email protected]
FEDE-C3PNG Sales Contacts – Theorem
Europe Phillip McIlwee +44 1827 300662 or
+44 1827 3053550
Originator: Lindsay Larcombe Page 34 of 42 Pages Established: 4th April 2002
CDS-ID: llarcom1 (Global Version 1.4.5) Revised: 10th January 2017
FEDE-C3PNG Training contacts in FoE
The training of suppliers will take place at Ford Training sites, Niehl Germany and CEME Dagenham.
Suppliers will be integrated into classes of Ford employees.
For classes in Germany contact
Siemens PLM Software Training
NeXeo GmbH
+49 40 / 18 04 66 66-0 or +49 800 / 532 99 532 (Freephone)
Online booking: www.nexeo.de/de.php/training/c3p.html
Dassault Systems Software Training Holger Teermann
+49-221-9016062
For classes in UK contact
Siemens PLM Software Training
NeXeo GmbH [email protected] +49 40 / 18 04 66 66-0
Online booking: www.nexeo.de/de.php/training/c3p.html
Dassault Systems Software Training The Outsourced Training Company Ltd Ken Moss
+44-208-596-5475
For classes in Turkey contact
Çağdaş Danacı – [email protected] , +90 216-6643116
Originator: Lindsay Larcombe Page 35 of 42 Pages Established: 4th April 2002
CDS-ID: llarcom1 (Global Version 1.4.5) Revised: 10th January 2017
Appendix C– GSI Contacts and region specific information in the Ford
North America [FNA] region
Key contact information for personnel engaged in Supplier FEDE-C3PNG deployment.
GSI Team Ford Telephone Number E-Mail Address Role/Responsibility
Mark Tremonti +1-313-317-9097 [email protected] Supervisor FEDE-C3PNG Supplier Implementation
Ajay Bhate +1-313-248-9545 [email protected] GSI/CDX Lead FEDE-C3PNG Supplier Communications
Debra Drongowski +1-313-322-6988 [email protected] CDX Helpdesk/GSI Connectivity Administration Lead
Trevor Fisher +1-313-594-3714 [email protected] FEDE-C3PNG Supplier Implementation & UARS Lead
Diane Madigan +1-313-248-7798 [email protected] CAD Data Transfers
Help Desks
CDX Help Desk +1-313-322-3943 [email protected] Administrative/Document
Originator: Lindsay Larcombe Page 36 of 42 Pages Established: 4th April 2002
CDS-ID: llarcom1 (Global Version 1.4.5) Revised: 10th January 2017
FEDE-C3PNG Sales Contacts FNA –Siemens PLM Software
Please contact the following personnel for information on Teamcenter Engineering. Please note this is
not an out of the box solution but a Ford specific version:
Contact Phone Email
Mike Flynn 313-317-6021 [email protected]
FEDE-C3PNG Sales Contacts FNA – Dassault Systemes
Please contact the following personnel for information on CATIA V5. Please note that these contacts will
have information on the specific load required for Ford:
Contact Phone Email
EF Rossi 248-761-8357 [email protected]
Paul Silver 248-376-2746 [email protected]
Fabian Clua +33 1 6162 3495 [email protected]
Christian Legrain +33 1 6162 8359 [email protected]
Originator: Lindsay Larcombe Page 37 of 42 Pages Established: 4th April 2002
CDS-ID: llarcom1 (Global Version 1.4.5) Revised: 10th January 2017
Appendix D– GSI Contacts and region specific information in the
Ford South America [FSA] region Key contact information for personnel engaged in Supplier FEDE-C3PNG deployment.
GSI Team Ford Telephone Number E-Mail Address Role/Responsibility
Fabiano Tucci +55 71 3195-7579 [email protected] Ford Brazil /
Supervisor
Robson Gregos +55 71 3195-7638 [email protected] Ford Brazil / GSI
GSI Team Siemens
PLM
Rogério
Albuquerque +55 11 4224-7166 [email protected]
Siemens Brazil /
Manager
Leonardo Wilinski +55 11 4224-7161 [email protected] Siemens Brazil /
Manager
Originator: Lindsay Larcombe Page 38 of 42 Pages Established: 4th April 2002
CDS-ID: llarcom1 (Global Version 1.4.5) Revised: 10th January 2017
Siemens (Support)
Place Phone Website
Process to open the call
(Portuguese)
Argentina
+55 11 4224-7111
http://support.industrysoftware.aut
omation.siemens.com/
- Report an Issue / Product: FEDE-
C3PNG
- Inquire the Status of an Issue
https://web.c3p.ford
.com/start/Suporte_
Tecnico.pdf
Bolivia
Brazil
Chile
Colombia
Equator
Guiana
French Guiana
Paraguay
Peru
Suriname
Uruguay
Venezuela
FEDE-C3PNG Sales Contacts FSA – Siemens PLM Software
Contact with team listed below listed, for information about "Teamcenter Engineering" according to Ford specific
version:
- Site Siemens = http://www.siemens.com/entry/cc/en/;
Team Phone E-Mail Place /Responsability
Rogério Albuquerque +55 11 4224-7166 [email protected]
Siemens Brazil / Manager
Leonardo Wilinski +55 11 4224-7161 [email protected] Siemens Brazil / Manager
Originator: Lindsay Larcombe Page 39 of 42 Pages Established: 4th April 2002
CDS-ID: llarcom1 (Global Version 1.4.5) Revised: 10th January 2017
FEDE-C3PNG Sales Contacts FSA – Dassault Systemes
Contact with team by link listed below, for information about "CATIA" according to Ford specific version:
- Support = http://www.3ds.com/partners/plm-solutions-partnership/partner-list/ ;
- Training = http://www.3ds.com/partners/education-partnership/partner-list/ ;
FEDE-C3PNG Process Flow FSA
Guide
https://web.c3p.ford.com/start/DI_FSAO_C3PNG_Process_Flow_Fluxo_do_Processo_C3PNG_Aug_19_2013_REV_02.ppt
Originator: Lindsay Larcombe Page 40 of 42 Pages Established: 4th April 2002
CDS-ID: llarcom1 (Global Version 1.4.5) Revised: 10th January 2017
Official CDSP ASF
The team must offer products and services to providers of data management at Ford. Experienced engineers with the best knowledge in the processes FORD in digital engineering, methods, processes and tools to help suppliers in:
• Provide the right data to the supplier of engineering in the correct formats; • Work with the methods and processes of engineering at Ford; • Checking the results of supplier engineering and database engineering FORD;
What kind of services can be delivered for supplier?
Manage engineering data movement from and to Ford on behalf of the supplier
The team can provide short-term contracts based on the type of service and schedules for the movement of data for /from Ford. This service is called CDSP (Certified Data Service Provider). These are companies that have been
examined and approved by Ford Motor Company, due to the great ability to manage and move data FEDE-C3PNG for/from Ford securely.
Ford engineering methods onsite assistance
The team offers assistance to all Ford's engineering processes related to methods, processes and CAD tools. Engineers with extensive experience in supporting engineering processes from Ford, with professionals able to execute these services in supplier and/or in Ford, if necessary.
Extended service offer for CAD data conversion
Depending on the data suppliers of the team execute conversions CAD to CAD and exports from CAD to STEP or STEP for CAD, offering connections via Syncplicity. Data quality checks and corrections (if necessary) that can be ordered as an engineering service demand.
Extended PLM services for FORD supplier
The partner can to require implementation of PLM concepts with kind of flexible for internal infrastructure integration. The official CDSP for Ford Brazil (FSA) is The Pac Group – Pac Brasil Consultores Ltda. Contacts: - Phone:
- (1) +55 011 5090-1430 / +55 011 97126-2272 / +55 011 4174-4169 (São Paulo); - (2) +55 071 3195-6310 (Bahia);
- Adress:
- (1) Alameda dos Maracatins, n.º 1435, 11º andar, Conjunto 1101, Cep: 04089-000 - Bairro - Moema - SP;
- (2) Av. Leste, nº 100 - Open Center, Sala 214, Cep: 42.801-170, Bairro - Ponto Certo - Camaçari - BA;
- Responsable / E-mail: - (1) Cristina Perrota = [email protected] (São Paulo); - (1) Rodolfo Perrota = [email protected] / [email protected] (São Paulo);
- (2) Jéssica Miranda = [email protected] / [email protected] (Bahia);
Originator: Lindsay Larcombe Page 41 of 42 Pages Established: 4th April 2002
CDS-ID: llarcom1 (Global Version 1.4.5) Revised: 10th January 2017
FEDE-C3PNGTraining information for FSA
Before requesting remote access users must provide training certificates. The level of training taken will define the access level given: - Basic = View; - Intermediate = Designer; All certificates must be sent by Siemens; The GSI will present a “TIPS & TECHINIQUES” about functions of WEB Connect:
Other mandatory training required by Ford Motor Company, is found in the file below:
Warning: Training cost must be agreed between supplier partners and Siemens. Ford provide pricing information as a guideline only.
https://web.c3p.ford.com/start/Tips_and_Techiniques_FSA_WEB_Connect.xls
https://web.c3p.ford.com/start/Trainings_for_Suppliers_FSAO_Aug_12_2013_Rev_04.xls
Originator: Lindsay Larcombe Page 42 of 42 Pages Established: 4th April 2002
CDS-ID: llarcom1 (Global Version 1.4.5) Revised: 10th January 2017
Revision
Date Revision Detail: ID of Reviser
Sept 2013 1.0
A- Initial Global Release – Combined regional info packs into one global version with local differences in appendicies and added SER1 information
llarcom1
March 2014 1.1 A- Minor changes to non working links to external
documents B- Update to FNA contact list
thoelter
April 2014 1.2 A- Contact updates for FOE Dassault. Also Driving
licence info marked FOE only. Added info regarding not buying licences too early
llarcom1
August 2014 1.3 A- Update to FNA contact list llarcom1
October 2015
1.4 A – Updates to UARS llarcom1
Jan 2016 1.4.1 A – Updates to contacts, graphics refresh llarcom1
May 2016 1.4.2 A -updates to nomenclature [FEDE additions] Thoelter
Sept. 2016 1.4.3 A –Link to SER3.0 changed B –Link to SER3.0 Whats new added
Thoelter
Oct 2016 1.4.4 A – Updates to FOE contacts Llarcom1
Jan 2017 1.4.5 A – Changed TC Licence comparison thoelter