Solstice LED Modules

Universal LED Modules

Infinite Applications

Application Guide October 2014

Solsti

ce S

cala

ble

LED

Mod

ules

Solstice Scalable LED Modules

Solstice Scalable LED Modules

2 Simply Universal

2 Solstice LED Modules, Replace ANY HID, Period.

Global Tech LED is an LED lighting design and manufacturing company based out of Bonita Springs, FL. Our success is attributed to quality products, sound business practices, and loyalty to our national and international rep firms and distributors. Our company strives to always uphold our motto, “Simply Universal”.

Our Solstice LED modules are perfect for LED retrofit kits and for new fixtures used in commercial and industrial lighting applications. Of the 500,000,000 HID bulbs in the USA alone, Solstice modules 5498 and M21, can replace every one of them, while producing the highest quality light in any fixture.

With the introduction of Life Sync smart technology, our modules are now intelligent. Monitoring their environment, Solstice modules run at optimum settings without damaging themselves, thus extending their life expectancies. Life Sync also takes care of lumen depreciation issues by slowly ramping lumen output to supplement any losses resulting from natural degradation.

Table of Contents

Intro to GTL ...........................................2

Solstice LED Modules..............................3-4

Optics.....................................................5

Color Temperatures................................6

Life Sync Smart Technology.....................7

Philips Luxeon T LED Chips......................8

Forced Air Thermal Management............9

Retrofit: Yoke vs Plate.............................10

Scalability...............................................11

Passive Cooling Thermal Management....12

Power Mode Selection............................13

Wireless Sensor Module and Program.....14

Drivers....................................................15

Warranty.................................................16

Solsti

ce S

cala

ble

LED

Mod

ules

Global Tech LED Customers

Before

Before

After

After

Lowering lighting cost by up to 70% and boasting such innovative features as universal compatibility, Life Sync smart technology, adjustable power modes, complete scalability, advanced optics, and color temperature options, our Solstice LED modules are Simply Universal!

Universal Compatibility

Solstice retrofit options are compatible with virtually every fixture, including recessed andtrack lighting. With fewer parts and easier assembly, these smaller and lighter weight modules provide both the fixture manufacturer, as well as the end user, with lower overall costs. Superior active cooling coupled with proprietary thermal management design, ensures the module maintains efficiency in high temperatures, provides color consistency, and en-sures low light degradation throughout its’ life expectancy of 100,000 hours. Solstice modules come in two sizes. GTSOL5498 (standard) is a 42 LED chip module and the Mini21 is a 21 LED chip module. With a variety of photometric options and unlimited possibilities these modules can replace any HID bulb in any application.

Life Sync Smart Technology

With the introduction of Life Sync smart technology, our modules are now intelligent. Monitoring their environment, Sol-stice modules run at optimum settings without damaging themselves, thus extending their life expectancies. Life Sync also takes care of lumen depreciation issues by slowly ramping lumen output to supplement any losses resulting from natural degradation. Learn more on page 7.

Power Modes

On board dip switches provide power selection capabilities for OEM fixture manufacturers and lighting designers who wish to adjust power and brightness in the field, according to specific applications. Additionally, on board energy savings program 561 is provided, and when activated, dims the modules automatically during off peak hours without using external controls. This system saves the equivalent of 1,100 hours of operating time per fixture, per year. Learn more on page 13.

Scalability

Solstice modules have the benefit of being completely scalable by allowing multiple modules to be installed in one fixture, if necessary. Both retrofit fixtures and brand new Solstice LED units are ordered and built to the requirements of each application. Learn more on page 11.

Advanced Optics

Advanced optic lenses in our Solstice modules provide the ability to customize light output to the modules’ surrounding environment. These specialized lenses can send light directly where it is needed, reducing dark spots, wasted lumens, and unwanted light pollution. Learn more on page 5.

Color Temperature OptionsOffering 7 different color temperatures, there is a match for every application from church to roadway lighting.

Solstice ModuleThe Brightest and Most Intelligent Solstice5498 and SolsticeM21

Solsti

ce S

cala

ble

LED

Mod

ules

3

Product Body Color CCT [K] CRI [Ra]Rated Life [L70] [h]

Output Setting

Drive Current

[mA]

Rated Lumens

[Lm]

Rated Watts [W]

Solstice Series Modules

GTSOL 5498 White 5700 70 100,000

HO 900 13164 135HI 700 9447 95

MH 525 8999 85ML 350 7814 75

GTSOL M21 White 5700 70 100,000

100% 700 5910 6075% 600 4594 5050% 500 3742 4025% 400 2679 30

Technical Specifications

GTSOL-M21GTSOL-5498

Solstice Scalable LED Modules

4

Seamless OpticsOptimize the Module for the Application

25° 360°50°

Seven-up optics are designed to perfectly fit the Solstice module’s Philips Lumiled Luxeon T LED clusters. Precise lens integration preserves lumens and prevents vibration. Solstice module optics provide a large variety of distribution patterns to meet the needs of each unique application.

Solsti

ce S

cala

ble

LED

Mod

ules

5

10° 75°

0° 0° 0° 0° 0°

Type II Type III

Solstice Scalable LED Modules

6

Color Temperature OptionsOptimize the Color for the Application

Name Description CRI FLUX Color Temperature Sticker ColorGTSOLM21-RD Mini 21 Philips LED 80 190 3500K RedGTSOLM21-BL Mini 21 Philips LED 80 190 4000K BlueGTSOLM21-BR Mini 21 Philips LED 80 190 5000K BrownGTSOLM21-GR Mini 21 Philips LED 70 220 5700K GreenGTSOLM21-YW Mini 21 Philips LED 70 210 4100K YellowGTSOLM21-OR Mini 21 Philips LED 80 170 2700K OrangeGTSOLM21-PR Mini 21 Philips LED 95 130 3000K Purple

Name Description CRI FLUX Color Temperature Sticker ColorGTSOL5498-RD 5498 Philips LED 80 190 3500K RedGTSOL5498-BL 5498 Philips LED 80 190 4000K BlueGTSOL5498-BR 5498 Philips LED 80 190 5000K BrownGTSOL5498-GR 5498 Philips LED 70 220 5700K GreenGTSOL5498-YW 5498 Philips LED 70 210 4100K YellowGTSOL5498-OR 5498 Philips LED 80 170 2700K OrangeGTSOL5498-PR 5498 Philips LED 95 130 3000K Purple

M21

5498

Optimal for all Environments

Protects Life of the System

Supplements Natural Lumen Depreciation for 70,000hrs

Maintains Cool Operating Temperature

Safety Circuits Keep the Module in the Safe Zone

Life Sync TechnologyOptimize the Module for the Environment

Solsti

ce S

cala

ble

LED

Mod

ules

7

Lumen Depreciation ChartLife Sync VS Standard *

*For Display Purposes Only

LUXEON® T Emitters

LUXEON® T emitters are illumination grade LEDs designed to deliver high efficacy with high flux density to enable tight beam control in directional and high lumen applications. With freedom from binning and with leading performance, LUXEON T emitters allow system optimization by blending the perfect combination of high efficacy and low system cost. With tight Correlated Color Temperature control, LUXEON T ensures consistency in system color point.

Luxeon T LED ChipsThe Brightest Chip for the Smartest Module

Solstice Scalable LED Modules

8

System Information

Life Sync uses advanced programming and technology to automatically make minuscule changes in the system according to the environment. This real-time maintenance ensures optimal performance and protects the life of the system.

Forced Air Thermal SolutionOptimize the Module for the Retrofit

System Information

Using a fan to force air through the heat sink provides an optimal level of active cooling by transporting excess heat away from the critical components on the circuit board. This viable active cooling solution for high bright-ness LEDs is inherently low in energy consumption, flexi-ble enough to fit into a small space, and has an expected life (100,000hrs) matching that of the Luxeon LEDs. This system is used in retrofits to compensate for the lack of passive heat transfer in older fixtures.

Before After

Solsti

ce S

cala

ble

LED

Mod

ules

9

Solstice Scalable LED Modules

10

Retrofit SystemsOptimize the Module for the Fixture

The Yoke Retrofit Bracket With only three pieces, the yoke retrofit is the most universal mounting solution available. The threaded rod can be made to any length, optimizing the bracket for the fixture. The same bracket and rod (without the yoke) is used for finial applications or situations where a threaded rod would be a better mounting option.

The Plate Retrofit Global Tech LED has predesigned plates to fit almost any fixture. However, if a fixture you would like to retrofit doesn’t fit one of our existing designs, we’ll make one that will. Simply send us a sample fixture or the fixture dimensions, and our engineers will customize a plate for you.

Solsti

ce S

cala

ble

LED

Mod

ules

11

Scalability Optimize the Modules for the Application

Raising the PowerSolstice modules have the benefit of being completely scalable. Both retrofit fixtures and brand new Solstice LED units are ordered and built for the requirements of the application. This brilliant scaling system gives complete flexibility to adapt to the specific lighting environment.

Solstice Scalable LED Modules

12

Passive Cooling Solution Optimize the Module for the Fixture

Parking Lots and Street Fixtures

Global Tech LED’s passive cooling solution is an innovative fixture design incorporating a massive heat sink open to the outside air, transferring heat away from the circuit board at a rate unparalleled by any other passive cooling system on the market. Solstice LED street and area lights use advanced technology to achieve a unique optical design that offers superior illumination and uniformity while minimizing glare and wasteful spill light.

Solsti

ce S

cala

ble

LED

Mod

ules

13

Power Mode SelectionOptimize the Module for the Application

Program Dip switch: Program Selection - You can currently select 1 of 4 programs, as indicated by the dot allocation on the left side of the Dip Switch.

Functions:

STD:A default setting unit is on at all times.

561 energy saver program (sav):When this option is selected it allows the customer to operate outdoor lamps at 100% output for the first 5 hours of operation, dimming 50% for 6 late evening hours, than ramping back up to 100% output for the last hour of the evening. This useful program saves 3 hours of operation per night which results in savings over 1,100 hours per year!

Dimming Programs:

Dimm Sink (default):This selection is to be used when a motion sensor or dimming switch are using a dimming ballast to pro-vide the 10v power to the motion sensor or dimming switch.

Dimm Source (selectable):This selection is to be used when a motion sensor or dimming switch are using the LED module to provide the 10v power to the motion sensor or dimming switch.

Wattage Selection:

Wattage Dip switch: Program Selection - You can currently select 1 of 4 wattage setting, as indicated by the dot allocation on the right side of the Dip Switch.

Both models feature 4 wattage selections: 5498- High Output, High, Med High, and Med LowM21- 100%, 75%, 50% and 25%

Please Refer to page 4 for Technical Specifications of the Wattage Selections for both Modules

Solstice Scalable LED Modules

14

Wireless Sensor ModuleOptimize the Module for the Application

Global Tech LED invented a Wireless Module which facilitates Dimming and Instant On/Off Control using ei-ther Photocell or Motion Sensor or both. It is engineered with simple mapping software, and utilizes radio protocols for Zigbee, Synapse or others typically found in the industry. When a motion sensor is engaged the Solstice is turned ON to 100% Output for 15 minutes. When no motion is detected after 15 minutes the Solstice can be set to either 20% or 50% Dimming or OFF. The Photocell or Motion Sensor must be installed within 500 feet of the Solstice Product using (20AWG) wiring for 0-10vdc sensor controls. The system is setup at installation and is automatically optimized to provide high performance for the Solstice LED product. The Module integrates seamlessly with most of the major manufacturers of 0-10 VDC sensors such as Lutron, SensorSwitch, WattStopper.

Programming the Wireless Module:

Our unique selectable dip-switch identifies the task. The 5-dip switch input selector tells the Wireless Module what the control task is going to be. We provide a detailed list of devices with corresponding switch selections. The control selection is a 10-dip switch selector where you code who is following who. Switch 1-5 controls 1 device, and 6-10 controls a second device. In some situations, you may require 2 control devices controlling the same fixture. For example, let’s say you have a motion sensor and you want it to control 2 fixtures. You would first set the input switch to designate a motion sensor and 2 light sources. On the control side you would configure all three devises with the same code (1-5). At this point, the 2 light sources will be controlled by the motion sensor: simple!

The controller does not need to be connected to the Internet in order for the system to work. In most cases, once the system is configured, the need to reconfigure the settings is minimal. For those clients that wish to have more control on a daily basis, the system can be set up using the Internet. Additional equipment will be required to operate the system along with yearly maintenance fees. This option will provide the remote mon-itoring of lights, collection of fixture data, such as temperature, service hours, energy usage, etc. and makes it easy to view or control lighting over the Internet.

M21 Switches

5498 Switches

*Module shown in HO setting** The “1” ,“2”, and “On CTS” markings on the dip switch are for manufacturing purposes and should not be used in reference to the settings. Please refer only to the “dot diagrams” printed next to the switch as a reference to the positions of the switches in different settings.

*Module shown in 100% setting** The “1” ,“2”, and “On CTS” markings on the dip switch are for manufacturing purposes and should not be used in reference to the settings. Please refer only to the “dot diagrams” printed next to the switch as a reference to the positions of the switches in different settings.

DriversOptimize the Module for the Application

LEDs have evolved into a practical, flexible light source for a wide variety of illumination applications. Common LED products available in the market today are configured in a series-parallel array – designed to be powered by a suitable 24vdc driver – which allows flexibility to connect variable load levels.

• Limited output voltage and current plus isolation for safe operation.• UL Outdoor Damp location rated - Fully potted for moisture resistance and thermal IP 66 benefits.• Compact size design facilitates new simplified retrofit application as well as low-profile fixture design.• Low temperature operation allows for use in any outdoor application Performance (-40°C).• Generous high temperature margin flexibility to facilitate fixture design capability (+60°C).• Tightly regulated output Consistent light output across line (1% line, 5% load) and load levels.• The Solstice unit can be used for Solar Applications without the need for external drivers or inverters due to regulating our current on the PCB Board.• A 5-year limited warranty*, solely on material, for new products and for end users, from the industry’s most trusted component maker.• Drivers for Solstice Modules are available for both 120-277v and 340-480v input voltages.

Brands:

Global Tech LED utilizes drivers from Hatch, Fulham, Inventronics, and Meanwell. Utilizing multiple driver brands allows us to customize the modules to not only the application but also the fixture and the unit’s immediate environment.

Solsti

ce S

cala

ble

LED

Mod

ules

15

Global Tech LED WarrantySTATEMENT OF LIMITED WARRANTYFOR GLOBAL TECH LED, LLC2/25/14

Subject to the exclusions set forth below, Global Tech LED, LLC. (“Global Tech”) warrants its commercial Solstice light emitting diode (LED) engine, including the LED arrays, fan, and integral control devices (“Products(s)”), to be free from defect in materials and workmanship (the “General Warranty”) for a period of ten (10) years from the date of shipment from Global Tech’s facilities or 50,000 operating hours, whichever is reached first.. The LED arrays in the Product(s) will be considered defective in material or workmanship only if a total of 10% or more of the individual light emitting diodes in the Product(s) fail to illuminate. The supplied driver is warrantied for 5 years. Global Tech will assist the customer in replacement of this product with the original OEM manufacturer. Global Tech may choose to replace drivers with another OEM if necessary at its discretion.

LABOR COSTS ASSOCIATED WITH WARRANTABLE LED MODULE REPLACEMENT.Global Tech LED may pay labor costs on a job with a 3% or greater failure rate due to a product defect, up to $25 (twenty five dollars) per unit at GTL’s discretion, associated with replacement of product deemed warrantable upon inspection of returned goods up to one year from date of purchase. Invoices for labor must be sent to Global Tech LED along with RGA (return goods authorization), and product to be inspected for warranty claim. If product defect is considered warrantable upon GTL inspection, Global Tech LED will reimburse labor expenses up to $25 per LED module. Projects asking for Labor cost reimbursements must first get approval from GTL and be issued an RGA that includes labor costs. GTL will not be responsible for equipment rental or other additional costs that may occur. *This program is subject to change at GTL’s discretion. This Statement of Limited Warranty (“Warranty”) applies only when the Product(s) are installed in applications in which ambient temperatures are within the range of specified operating temperatures and are operated within the electrical values shown on the LED driver Label. Global Tech will not be responsible under this Warranty for any failure of the Product(s) that results from external causes such as: acts of nature; physical damage; exposure to adverse or hazardous chemical or other substances; use of reactive cleaning agents and/or harsh chemicals to clean the Product(s); environmental conditions; vandalism; fire; power failure, improper power supply, power surges or dips, and/or excessive switching; induced vibration; animal or insect activity; fault or negligence of purchaser, any end user of the Product(s) and/or any third party not engaged by Global Tech; improper or unauthorized use, installation, handling, storage, alteration, maintenance or service, including failure to abide by any product classifications or certifications, or failure to comply with any applicable standards, codes, recommendations, product specification sheets, or instructions of Global Tech; use of the Product(s) with products, processes or materials supplied by any end user or third party; or any other occurrences beyond Global Tech’s reasonable control. Adequate records of operating history, maintenance, and/or testing must be kept by the end user and provided to Global Tech upon request to substantiate that the Product(s) have failed to comply with the terms of this Warranty. Neither polycarbonate non acrylic material used in the Products is warranted against yellowing, as yellowing may naturally occur over time due to normal aging. The Product(s) are not warranted against costs that may be incurred in connection with changes or modifications to the Product(s) required to accommodate site conditions and/or faulty building construction or design. In addition, the Product(s) are not warranted against cost resulting from installation of a third party components, failures of third party supplied components, or failures of Global Tech supplied Product(s) caused by a third party supplied component.If Global Tech determines, at its sole discretion, the Product(s) fail to comply with the terms of this Warranty, Global Tech, at its option, will repair or replace the Product(s) with the same or a functionally equivalent Product(s) or component part(s). This Warranty excludes labor and equipment required to remove and/or reinstall original or replacement parts. This Warranty extends only to the Product(s) as delivered to, and is for the sole and exclusive benefit of, the original end user of the Product(s) at the original location. This Warranty may not be transferred or assigned by the original end user. The repair or replacement of any Product(s) or component part within the Product(s) is the sole and exclusive remedy for failure of the Product(s) to comply with the terms of this Warranty and does not extend the Warranty period. Warranty claims regarding the Product(s) must be submitted in writing within (30) days of discovery of the defect or failure to an authorized Global Tech post sales or customer service representative. Product(s) or component part(s) may be required to be returned for inspection and verification of non conformance by Global Tech, but no Product(s) or component part(s) will be accepted for inspection, verification or return unless accompanied by a “return authorization number” which can be obtained only from an authorized Global Tech post sales or customer service representative. Global Tech is not responsible for any costs and expenses incurred in connection with shipment of Product(s) to Global Tech, but Global Tech shall bear all cost and expense incurred in connection with shipment of replacement Product(s) to the customer.

THE FOREGOING WARRANTY TERMS ARE EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES, AND GLOBAL TECH EXPRESSLY DISCLAIMS ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, RELATING DIRECTLY OR INDIRECTLY TO THE PRODUCT(S), WHETHER ORAL, WRITTEN, OR ARISING BY COURSE OF DEALING OR USAGE OF TRADE, INCLUDING ,WITHOUT LIMITATION, ANY WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. NO AGENT, DISTRIBUTOR OR OTHER SUPPLIER OF GLOBAL TECH PRODUCTS HAS THE AUTHORITY TO MODIFY OR AMEND THIS WARRANTY WITHOUT EXPRESS WRITTEN AUTHORIZATION FROM GLOBAL TECH.

The total liability of Global Tech on any and all claims of any kind, whether in contract, warranty, tort (including negligence), strict liability or otherwise, arising out of or in connection with, or resulting from, Global Tech’s performance or breach of this Warranty, or from Global Tech’s sale, delivery, resale, repair, or replacement of any Product(s) or the furnishing of any services, shall in no event exceed the purchase price allocable to the Product(s) that give rise to the claim, and any and all such liability shall terminate upon the expiration of the warranty period specified above.

IN NO EVENT SHALL GLOBAL TECH BE LIABLE FOR ANY INDIRECT, SPECIAL, INCIDENTAL, CONSEQUENTIAL, EXEMPLARY OR PUNITIVE DAMAGES, EVEN IF INFORMED OF THE POSSIBILITY OF SUCH DAMAGES, WHETHER AS THE RESULT OF BREACH OF CONTRACT, WARRANTY, TORT (INCLUDING NEGLIGENCE), STRICT LIABILITY, OR ANY OTHER THEORY, INCLUDING WITHOUT LIMITATION LABOR OR EQUIPMENT REQUIRED TO REMOVE AND/OR REINSTALL ORIGINAL OR REPLACEMENT PARTS, LOSS OF TIME, PROFITS OR REVENUES, LACK OR LOSS OF PRODUCTIVITY, INTEREST CHARGES OR COST OF CAPITAL, COST OF SUBSTITUTE EQUIPMENT, SYSTEMS, SERVICES OR DOWNTIME COSTS, DAMAGE TO OR LOSS OF USE OF PROPERTY OR EQUIPMENT OR ANY INCONVENIENCE ARISING OUT OF ANY BREACH OF THE FOREGOING WARRANTY OR OBLIGATIONS UNDER SUCH WARRANTY.

Global Tech reserves the right to modify or discontinue this Warranty without notice provided that any such modification or discontinuance will only be effective with respect to any Product(s) purchased after such modification or discontinuance.For any questions regarding this warranty please contact Global Tech LED, LLc., 8901 Quality RD, Bonita Springs FL 34135. 877.748.5533.

Solstice Scalable LED Modules

16