globalenergy-documents-module1-history of energy lecture transcripts

Upload: laviniu-s-nacu

Post on 07-Aug-2018

213 views

Category:

Documents


0 download

TRANSCRIPT

  • 8/20/2019 Globalenergy-documents-module1-History of Energy Lecture Transcripts

    1/13

    1

    History of Energy Lecture Transcripts

    Welcome to the first module of Global Sustainable Energy: Past, Present, and Future. And we're going to

    start the story like we say, in the past. This is the history of energy. In the beginning, we just had human

    power; whatever we could do in a day was what got accomplished. We carried things or used simple

    machines. How much work can a single human accomplish if you work all day? Well, for example, take a

    look at this picture here. There's a young lady carrying water in her village. That's a current picture,

    that's modern photography. So one of the things we'll look at is not only the past, but the fact is that

    many people around the world, over a billion still live on human power today, or simple machines.

  • 8/20/2019 Globalenergy-documents-module1-History of Energy Lecture Transcripts

    2/13

    2

    Before we get started, there's some things we have to figure out. This is a science based course, so we

    have to figure out what a unit of power, energy, what are these things that we, we deal with all the time

    and never stop to think about? But a watt is a unit of power, or energy per unit time. The unit of energy

    is a joule. You know, like scientists do, they always figure out something to name after themselves.

    Actually, they didn't, it's the people who follow on after them, they thought so much of the people,

    Watt, Joule, that they named units of power and energy after them.

    So a watt, when you look at it, is energy per unit time or a joule per second. So it's instantaneous rate,

    how much can somebody do at a particular point in time. Now if you look at an average human, If you

    work all day, an average human can work at a rate of 75 watts, or power output. Now that's an average

    human. That's not an athlete that's really in training and can jump and leap tall buildings in a single

    bound, or things like that, that's an average human. So let's break this down in units. A daily output is 75

    watts, or joules per second, a watt is a joule per second. Now, if we convert that time, 3,600 seconds in

    an hour, we can get rid of that time in the bottom. And then, an average workday of eight hours, you

    can figure out the average daily output of a human, which is 2.16 megajoules were the M stands for

    mega or million. So 2.16 million joules per working day is an average human being.

  • 8/20/2019 Globalenergy-documents-module1-History of Energy Lecture Transcripts

    3/13

    3

    Now another way to look at that is something that some of us might be more familiar with is that the

    energy use if I save for instance a light bulb. So look at a 100 watt incandescent light bulb. Now this is

    before we get into the next module, so it's not an energy efficient light bulb yet. Let's look at the old

    fashioned incandescent light bulb, the 100 watt. Now how much energy would we use in a 10 hour

    period? Well 100 watts times 10 hours is equal to a 1000 watt hours. Now watch the units very

    carefully. This is where a lot of people get tripped up. It is not watts per hour, it's watt hours. It's on the

    same line. So if you look at the units, a watt as a joule per second. If we multiply this by ten hours with a

    suitable conversion, 3600 seconds per hour, the time cancels out so we're left with joules or energy. So

    when you buy a kilowatt hour from your utility, you're in effect buying a block of energy. That's all we're

    doing there, is buying a block of energy. So on a human scale, an output of seventy-five watts for eight

    hours, yield six hundred watts per day of 0.06 kilowatt-hours per day.

  • 8/20/2019 Globalenergy-documents-module1-History of Energy Lecture Transcripts

    4/13

    4

    So we worked this way for many, many years, just human power. And you know, I can imagine the first

    person looking over there after a long day at work and getting kind of tired and thinking to himself, man

    if I could just get this cow to work for me things would be a lot better. So that's what they did, they

    harnessed a cow, an oxen, a farm animal. Even before they had the farms they thought about

    domesticating and harnessing an animal to help human beings out. The problem is that early on, these

    early harnesses did not effectively transfer the power from the animal to whatever's being pulled. So

    the early harnesses made a cow or oxen worth about four humans. And at four humans, it wasn't worth

    the prevailing practice of just enforcing labor so what we did was that didn't change practices for many,

    many years. We still worked on that.

  • 8/20/2019 Globalenergy-documents-module1-History of Energy Lecture Transcripts

    5/13

    5

    So what happened next is that we come up with a better harness where the cow was worth about six

    human beings. At that point, domesticated animals really took off and we started harnessing simple

    machines. These, a picture right here is two donkeys, looks like from the ears, there pulling a disc

    harrow with the farmer sitting on a seat right there. So we tried to harness our animals to help us out.

    So let's take this further and make a, an example that kind of leaps forward in class a little bit. But just

    look at the US, for example; we spend and use about 18 and a half million barrels of oil a day in this

    country. Okay, and a barrel's 42 gallons. You find out that a gallon of crude oil's worth about 141,000

    BTUs, or British Thermal Units. You can do that in mega joules also. But you break that down, do the

    proper conversions, and find out that, that oil consumption is worth about 2.43 gallons per day per

    person in the country. And if you look at that, I gotta look down at my notes here 'because I couldn't

    remember all these things at once stuck in my head. But that allocation of oil to each person in this

    country is equivalent to about 166 humans, output of 166 humans per day. So that would be like

    harnessing 166 laborers to do what you need to do, to have done during the day regardless of how you

    wanted it done, whether it was going to the store in your car, or air conditioning your house. But, in

    terms of comparison, that is, concentrated energy.

  • 8/20/2019 Globalenergy-documents-module1-History of Energy Lecture Transcripts

    6/13

    6

    But, if we look around the world, today, we still have many places in the world that use human powered

    activity and animal power activity for the vast majority of what they do in a day. Here's two oxen here

    pulling a plow on the left hand picture. On the right hand picture are two farm carts. You can see some

    of the modern technology, the rubber tires, axles, metal, but still, it's a farm animal pulling a farm to

    market type of cart.

  • 8/20/2019 Globalenergy-documents-module1-History of Energy Lecture Transcripts

    7/13

    7

    We progress in our history of energy, we started using wind power for things. This is a, a scene probably

    in the low countries in Holland where you use wind to pump water and to drain the land so you could

    farm it. And in the front you have a cart pulled by, it looks like a dog. So we harnessed, harnessed very

    many different animals to do our work for us over time. And now we move on to physical attributes of

    the planet we live on, like wind.

  • 8/20/2019 Globalenergy-documents-module1-History of Energy Lecture Transcripts

    8/13

    8

    The picture on the left is a, Jacobs Aeromotor the Great American Desert is what we called that

    originally when we explored that region in the United States of America, but we found out that desert

    actually had very, very good soils, and underneath the desert was a large aquifer. So we put these early

    wind powered pumps in there, to pump water out to provide water for our earlier farms and farm house

    uses. Now, an early version of that if you look on the right is a Persian wind mill. Now that Persian wind

    mill's probably 1500 years old, it's a vertical axis, different from the others and wind can only approach

    from one direction. That's in an area where you might have tradewinds that are very predictable, always

    coming from one direction.

  • 8/20/2019 Globalenergy-documents-module1-History of Energy Lecture Transcripts

    9/13

    9

    Water power was the next thing to be harnessed, where we have examples of water wheels being in

    use. There's an overshot, and I think the one the top picture there might be stream flow, where it's

    actually just the flow of the stream that causes the water wheel to work. And that can be used to saw

    wood, to grind grain, to provide power for many different uses.

  • 8/20/2019 Globalenergy-documents-module1-History of Energy Lecture Transcripts

    10/13

    10

    Time marches on. We can start putting these outputs in comparison to what we talk about in early

    human output. Early windmill mechanical outputs, about 1.5 to 10.5 kilowatts, early water wheel

    mechanical output is 1.5 to 3.8 kilowatts. Again, many, many times more than a single human could do

    during a day. Now, the wind power strange looking thing right next to my elbow, is a, guy by the name

    of Brush invented a windmill to produce electric, not wind mill, but a ind powered generator to produce

    electricity in 1888. The output was 12 kW, massive improvement, but still nowhere near what we do

    today.

  • 8/20/2019 Globalenergy-documents-module1-History of Energy Lecture Transcripts

    11/13

    11

    Now, use wind power, use water power, now somebody comes up with an engine, an actual mechanical

    engine. The first engine in production use was a Newcomen steam, steam engine in 1712. Newcomen

    developed a very simple steam engine that basically used an up and down motion to pump water out of

    coal mines. Didn't care about the efficiency, which was about 1%, because it's a coal mine. All you did

    was dig more coal out of the coalface and shove it into this pump to pump water out of the mine. Well,

    along comes Watt, again we named that unit of power after that, the watt. Along comes Watt, and his

    partner Bolton, who somehow in the tides of history have been forgotten, but it's the Watt/Bolton

    steam engine. Massive improvements in terms of separating the condensing and the heating part, so

    you have a cool part and a hot part. And they separated the two, so you could do them more efficiently

    and more quickly. Also, replace the up and down motion with a rotary crankshaft to give us rotary

    motion. Now rotary motion is important because the next thing you do with rotary motion, is start

    making things that can move.

  • 8/20/2019 Globalenergy-documents-module1-History of Energy Lecture Transcripts

    12/13

    12

    So, early power summary, we've got a working laborer, 0.075 kilowatts, an Ox, 0.45 Kilowatts, early

    wind power one 1.5 to 10.5, early water power is 1.5 to 3.8 kilowatts, Newcomen steam engine is 15

    kilowatts, Watt/Bolton steam engine now 25 kilowatts. But the next thing on our ticket is a diesel

    engine, that's 10 kilowatts. So we're starting to move on to magnify human power.

  • 8/20/2019 Globalenergy-documents-module1-History of Energy Lecture Transcripts

    13/13

    13

    So let's see what these numbers mean in comparison to working laborers. So an ox is equal to 0.45

    kilowatts, human being was 0.075. Simple division, back to our onversion. Six workers equaled about

    one ox. The largest early wind power devices represent the output of 140 laborers, 10.5 kilowatts to

    0.075 kilowatts. The output of a Watt/Bolton stream engine was equivalent to about 333 laborers. Now,

    flash forward ahead to us, an automobile with about 134 horsepower engine, I picked that because

    that's equal to about 100 kilowatts, is equivalent to the output of about 1300 individual laborers. So

    remember that the next time you have to go back and get that gallon of milk that you forgot at the

    store. It's like harnessing 1300 individual laborers just to get you out to get that gallon of milk, that you

    forgot. So that's kind of a beginning of our early power summary, early energy summary. And the next

    module we'll talk about is agricultural energy.